Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/5000mAh) – 140C Burst Unleash the Voltage – Dominate the Track The Gens Ace Redline 2.0 LiHV Shorty Battery is built for serious RC racers looking for explosive acceleration, sustained voltage, and consistent performance. Featuring ultra-low internal resistance and a massive 140C discharge rating, this lightweight pack delivers big power in a compact footprint — perfect for 1/10 scale racing applications. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power for competitive racing 🔋 7.6V 2S LiHV / 5000mAh Capacity – extended runtime with high-voltage punch 🔌 5mm Bullet Connectors – secure, high-amp power delivery 📏 Shorty LCG design – low-profile for improved chassis balance and handling ✅ Factory-matched cells for consistency and efficiency 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 5000mAh Continuous Discharge: 140C Max Charge Rate: 1C (5.3A) Configuration: 2S1P Watt Hours: 38Wh Connector Type: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 46 x 19mm Weight: 177g (6.24oz) 🏁 Whether you're battling it out on high-traction carpet or slick dirt tracks, the Gens Ace Redline 2.0 Shorty brings unmatched burst and endurance to your race day setup.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Gens Ace Redline 2.0 4S LiHV Battery 140C (15.2V/6300mAh) w/5.0mm Bullet Part Number: GEA6300140P4S5B Deliver elite-level performance with the Gens Ace Redline 2.0 4S LiHV 140C Battery. Designed for serious racers, this high-discharge LiHV pack offers incredible punch, stable voltage output, and a lightweight footprint to maximize efficiency and speed on the track. ✅ Features: ⚡ 140C high discharge rate for extreme power delivery 🔋 15.2V LiHV (High Voltage) design for improved performance over standard LiPo 🧩 Factory-matched cells ensure optimal voltage, resistance, and capacity consistency 🧱 Low-profile, compact design for better weight distribution 🧊 Low internal resistance for stable output and long cycle life 🔌 5.0mm bullets for power, 2.0mm bullets for balancing ⚠️ LiPo Safety Notice: Always use a LiPo-specific charger Never charge unattended or above recommended voltage Always balance charge and store in a LiPo safe bag/box Do not over-discharge (keep cell voltage above 3.2V) Let the pack cool before recharging 📦 Includes: (1) Gens Ace Redline 2.0 4S LiHV 140C 6300mAh Battery (5.0mm bullet-style main connector & 2.0mm balance port 📐 Specifications: Voltage: 15.2V (4S LiHV) Capacity: 6300mAh Discharge Rate: 140C Continuous Charge Rate: 1C (6.3A Max) Cell Configuration: 4S1P Connector: 5.0mm Bullet (Main), 2.0mm Bullet (Balance) Dimensions: 5.47 x 1.8 x 1.45 in (139 x 47 x 37 mm) Weight: 15.9 oz (452g) Watt Hours: 95.76Wh Unleash race-ready performance with the Gens Ace Redline 2.0 — the choice of champions.

Read more less

  Easily connect batteries and electronics with different plug types using the Gens Ace XT60 Male to Deans (T) Female Adapter Cable. Perfect for racers and bashers who want quick compatibility without rewiring. Features: XT60 Male to Deans (T) Female adapter for versatile connectivity High-quality construction for safe, efficient power transfer Compact design for easy use in tight spaces No soldering required — plug-and-play convenience A handy tool for your RC pit box to keep you running, no matter what connectors you’re working with.

Read more less

The Goosky E2 UH-1Y Air Rescue Helicopter combines stunning scale realism with advanced smart-flight technology to create one of the most exciting RC helicopter experiences available today. Featuring GPS positioning, LiDAR stabilization, dual brushless direct-drive motors, and hands-free hovering capability, this 1/35 scale UH-1Y Venom delivers smooth, stable flight for beginners while still offering the performance experienced pilots crave.  ⚡ Features: 🚁 Highly detailed 1/35 scale UH-1Y Air Rescue helicopter design📡 GPS positioning and LiDAR stabilization for ultra-stable hovering⚙️ Dual brushless direct-drive motor system for smooth, efficient power🧠 Smart flight control system with beginner-friendly flight assistance🔄 Hands-free hover and intelligent return functions📱 Advanced flight modes for both new and experienced pilots🎮 2.4GHz rechargeable transmitter included🧳 Includes carrying case for easy transport and protection🔋 Includes Smart LiPo battery and dedicated charger🏁 Ready-To-Fly — minimal setup required 📏 Specifications: Part Number: BAF050006-AScale: 1/35Rotor Diameter: 490mmBody Length: 483mmHeight: 132mmWeight: 538gBattery: 3S 11.1V 1600mAh Smart LiPoFlight Time: Approximately 15 MinutesControl Distance: Approximately 300 MetersMotor Type: Dual Brushless Direct DriveCharging Time: Approximately 90 Minutes 📦 Includes: (1) Goosky E2 UH-1Y Air Rescue Helicopter(1) 2.4GHz Rechargeable Transmitter(1) 3S Smart LiPo Battery(1) Dedicated Charger(1) Carrying Case(1) User Manual 🔧 Perfect For: Beginner helicopter pilots wanting GPS-assisted stabilityScale helicopter enthusiastsIntermediate pilots looking for smooth, realistic flyingCollectors wanting an ultra-detailed UH-1Y Venom replica 💡 Pro Tip: The GPS and LiDAR systems make this one of the easiest RC helicopters to fly in its class—perfect for pilots transitioning from drones into collective-pitch helicopters while still offering enough performance to keep experienced flyers entertained.

Read more less

Keep your heli tight and responsive with the GooSky S1 Double Linkage Set. Designed as a direct replacement for the GooSky S1, these linkages ensure accurate control input and smooth flight performance. Whether you're freshening up your setup or replacing worn components after hard flying, this set keeps your S1 dialed in and ready for the next pack. ✅ Features Direct replacement for GooSky S1 Maintains precise control geometry Durable construction for reliable performance Ideal spare part for maintenance or rebuilds 📦 Includes (6) S1 Double Linkages 🔧 Compatibility GooSky S1 Helicopter Smart to keep extras in your parts bin so you’re never grounded. 🚁    

Read more less

Keep your heli dialed in and ready to fly with the GooSky S2 Servo Arm Set. This replacement set is designed specifically for the GooSky S2 helicopter, ensuring precise fitment and reliable control performance. Whether you're rebuilding after a hard 3D session or just stocking up on spares, this pack gives you plenty of replacements to keep your setup tight and responsive. ✅ Features Direct replacement for GooSky S2 Precision fit for proper linkage geometry Durable construction for reliable performance Ideal spare part for maintenance or rebuilds 📦 Includes (10) Servo Arms 🔧 Compatibility GooSky S2 Helicopter Perfect to keep in your parts box so you’re never grounded. 🚁

Read more less

HackFab Losi Mini-B Bolt-On Sprint Car Cage (Black) – HFB02046BK Convert your Losi Mini-B into a full-fledged sprint car with the HackFab Bolt-On Sprint Car Cage. Designed for easy installation, this cage bolts directly to your stock aluminum chassis and pairs perfectly with the HackFab Sprint Car Lexan Body Kit (HFB02045 – sold separately). Featuring a unique hinge system for quick access and durable 3D-printed mounts, this kit is built for racers who want authentic style and easy maintenance. Features: Direct bolt-on fit for Losi Mini-B aluminum chassis Designed to work with HackFab Sprint Car Lexan Body (HFB02045) Innovative hinge system for quick access to internals Includes durable 3D printed mounts Includes: (1) Sprint Car Cage Kit (1) 1" Body Post All necessary mounting hardware

Read more less

HackFab Losi Mini-B Bolt-On Sprint Car Lexan Body Kit (Clear) – HFB02046BK Upgrade your Losi Mini-B into a dirt oval contender with the HackFab Sprint Car Lexan Body Kit. This pre-trimmed, clear Lexan body is designed to bolt directly onto the HackFab Sprint Car Cage (HFB02046BK - sold separately), eliminating the hassle of custom cutting and bending. It's lightweight, high-quality, and ready for your custom paint job! Features: Designed specifically for Losi Mini-B with HackFab Sprint Car cage High-quality clear Lexan Pre-trimmed, bent, and ready to assemble Includes lightweight composite mounting hardware Includes: (1) Clear Lexan body (pre-trimmed and bent) Mounting hardware Notes: Headers (HFB02044M) not included Painted body shown for reference only – yours will arrive clear and unpainted

Read more less

Fine-tune the ride height and suspension travel of your Losi Mini-T 2.0 or Mini-B with the HackFab Internal Shock Spacer Limiter Kit. These 3D-printed internal shock spacers install on the shock shafts to reduce available shock travel, allowing racers to lower the chassis and dial in suspension movement for different track conditions. They're especially useful for oval and on-road racing, where the large amount of suspension up-travel provided by the stock setup may not be needed. ⚡ Features: Designed for the Losi Mini-T 2.0 and Mini-B Internal shock limiters reduce available shock travel Allows precise ride-height and suspension-travel tuning Includes 1mm through 5mm spacer sizes Spacers can be combined to achieve additional limiting amounts Color-coded by size for quick identification Excellent for oval and on-road setups Helps lower the chassis for reduced ride height 3D-printed construction 40-piece complete tuning kit 📦 Includes: (8) 1mm Shock Limiters (8) 2mm Shock Limiters (8) 3mm Shock Limiters (8) 4mm Shock Limiters (8) 5mm Shock Limiters 40 Total Spacers 🔧 Compatibility: ✅ Losi Mini-T 2.0✅ Losi Mini-B✅ May fit other vehicles using a similar shock-shaft diameter 🏁 Oval & On-Road Setup Tip: HackFab recommends approximately 6mm of internal spacing as a starting point for oval and road racing. Around 6mm of limiting can allow the rear suspension arms to sit approximately level with the ground, providing a useful baseline for further chassis tuning. ⚠️ Installation Note: Because these spacers are 3D printed, small pieces of excess printing material may occasionally remain. Inspect and clean each spacer before installation to ensure smooth operation inside the shock. 💡 Pro Tip: Don't think of these as just ride-height spacers. Changing internal limiting also changes how much the suspension can extend, making it a useful setup tool for controlling chassis movement in high-grip oval and on-road applications.  

Read more less

 ⚙️ Stay Organized. Protect Your Gears. Race Ready. Keep your pinion collection organized and easily accessible with the HackFab Mini Carbon Fiber Pinion Caddy. Designed specifically for 2mm bore pinion gears commonly used on the Losi Mini-B and Mini-T platforms, this lightweight carbon fiber caddy is the perfect addition to any pit box or race bag. Whether you're tuning gearing for different track conditions or simply keeping spare pinions organized, this caddy helps prevent lost parts and keeps your setup professional and race-ready. ⚡ Features: ⚙️ Designed for 2mm bore pinion gears🏁 Perfect for Losi Mini-B and Mini-T applications💪 Lightweight and durable carbon fiber construction🔧 Organizes and stores multiple pinion gears neatly🧰 Great for pit boxes, race bags, and workbenches🚀 Helps simplify gearing changes at the track✨ Professional appearance with premium carbon fiber finish 📦 Includes: (1) HackFab Mini Carbon Fiber Pinion Caddy 📏 Specifications: Part Number: HFB03010Material: Carbon FiberPinion Bore Compatibility: 2mm 🔧 Compatibility: Losi Mini-BLosi Mini-TMost 2mm bore pinion gears 💡 Pro Tip: Track conditions change throughout race day. Keeping multiple pinion sizes organized in a dedicated caddy makes gearing adjustments faster and helps prevent losing those tiny pinions in your toolbox or pit area. 🏁🔧

Read more less

 🏁 Purpose-Built Oval Performance for Your Mini Platform. Transform your Losi Mini-T 2.0 or Mini-B into a true Mini Late Model oval machine with the HackFab PRO Mini Late Model Oval Chassis Conversion Kit. Designed specifically for competitive oval racing, this precision CNC-machined carbon fiber chassis delivers improved stability, race-tuned weight distribution, and the scale appearance serious oval racers are looking for. With an extended wheelbase inspired by real Mini Late Models, left-side weight bias for oval handling, and integrated mounting solutions, this conversion kit creates a planted, predictable race car ready for carpet or clay oval action. ⚡ Features: 🏁 Converts the Losi Mini-T 2.0 or Mini-B into a Mini Late Model oval racer⚙️ Precision CNC-machined carbon fiber chassis construction🧭 Left-offset chassis design improves oval cornering balance🔧 Extended wheelbase for improved stability and realistic proportions💪 Carbon fiber front bumper and integrated nerf bar system🔋 Adjustable aluminum battery brackets for chassis tuning🏎️ Carbon rear body mount for lightweight durability🔄 Backwards compatible with previous V2 kits 📦 Includes: (1) PRO Mini Late Model Oval Chassis Conversion Kit 🔧 Compatibility: Losi Mini-BLosi Mini-T 2.0 💡 Pro Tip: Left-side weight bias is a huge advantage in oval racing—it helps the car stay planted in the corners and improves consistency during long mains on high-bite surfaces.

Read more less

Wake up your micro crawler with true 3S power. The HobbyPlus 3S 360mAh 20C LiPo is designed for the CR18P PRO Juice Up Edition, delivering stronger throttle response and increased wheel speed in a compact, lightweight package. Perfect for tight chassis applications where space is limited but performance matters. ⚡ Compact 3S Performance This 3S pack provides higher voltage punch while maintaining a small footprint for micro rigs. Compact size for tight installs 11.1V (3S) output 20C discharge capability Ideal for CR18P PRO and other compatible builds 🔌 Connector Details Battery Connector: JST-MCX (JST-DS style) Balance Lead: XH Be sure your ESC and charger are compatible before installation. 📦 Includes (1) 3S 11.1V 360mAh 20C LiPo Battery 📊 Specifications Nominal Voltage: 11.1V (3S) Capacity: 360mAh Maximum Charge Rate: 1C (0.35A recommended) Peak Discharge Rate: 20C Cell Configuration: 3S1P Watt Hours: 3.885Wh ROAR Approved: No ⚠️ LiPo Safety Reminder Always balance charge Never leave unattended while charging Use a LiPo-safe bag Do not over-discharge (minimum 3.2V per cell) Allow battery to cool before recharging If you're looking to unlock more power from your CR18P PRO while keeping things lightweight and compact, this 3S pack delivers.  

Read more less

Upgrade your drivetrain strength and eliminate flex with the HobbyPlus Steel U-Joint Drive Shaft Set for the CR-18. Designed as a direct replacement for the stock plastic shafts, this heavy-duty steel set delivers improved durability and smoother power transfer when crawling gets technical. If you’re running brushless or pushing your CR-18 hard on the rocks, this is a smart reliability upgrade. 🔧 Performance Upgrade These slider-style steel driveshafts: Increase drivetrain strength Reduce flex under load Improve power transfer efficiency Handle higher torque setups Built from durable machined steel, they’re designed to withstand demanding crawling conditions. 💪 Features Heavy-duty steel construction U-joint design for smooth articulation Slider-style shafts Direct bolt-on replacement Stronger and more durable than stock plastic shafts 📦 Includes (1) Front/Center Driveshaft (1) Rear/Center Driveshaft Installation Hardware 🔧 Compatibility HobbyPlus CR-18 If you’re tired of twisting stock shafts or want added confidence on tough climbs, this steel U-joint set is a solid upgrade.    

Read more less

The HobbyPlus CR-18P Terranaut 8×8 is a mission-ready recovery and hauling rig built on one of the most capable micro crawler platforms ever made. With Active All-Wheel Steering, a remote-operated 2-speed transmission, portal axles, and a fully functional recovery winch, this 1/18 utility crawler delivers an unmatched mix of realism, capability, and control. Whether you're navigating technical rock sections, hauling scale trailers, performing recovery missions, or just trail-running with friends, the Terranaut does it all — with style and precision. Key Features Active All-Wheel Steering (Active-AWS)Fully proportional front + rear steering with independent control. Perform: Tight U-turns Crab walking Front-only or rear-only steering Full coordinated or counter-steer modes 2-Speed Transmission (Remote Operated) Low Gear (124:1): Maximum torque for crawling, recovery, and technical driving High Gear (31:1): Trail-speed cruising Functional Recovery WinchStainless steel cable + metal hookRemote-controlled operation for real recovery missions Extreme Scale HardbodyInjection-molded body, interior details, dual spares, accessories, and tilt-cab for instant battery access Remote-Controlled LED Lighting5 lighting modes + high-visibility rotating amber beacons Gooseneck / Fifth-Wheel Trailer HitchReady for hauling and towing Full-Metal Gear DrivetrainUpgraded for durability and long-term reliability Portal AxlesIncreased ground clearance and tunable ratios Aluminum ChassisBlack-anodized rails with chamfered edges + laser-etched HB logo High-Quality SuspensionBig-bore oil-filled shocks with threaded bodies Performance Steering SystemServo-on-axle steeringMetal-gear servos on all four axlesCVDs for strength and increased steering angle Electronics & Radio System FlySky 6-channel transmitter Proportional rear-steer thumb lever Smooth FlySky ESC/receiver combo Big-block 280-size brushed motor Water-resistant electronics Battery & ChargingIncludes 2S 7.4V 1100mAh LiPoRuntime: up to 1 hourUSB charger included Why the Terranaut 8×8 Stands Out The Terranaut isn’t just another crawler — it's a purpose-built multi-utility machine. With eight driven wheels, eight independently steerable wheels, a functional winch, scale towing capability, and a full hardbody, it delivers a level of realism and versatility rarely seen in the micro-scale category. From recovery missions to scale adventures, the Terranaut 8×8 offers absolute control, incredible torque, and head-turning detail. Includes (1) HobbyPlus CR-18P Terranaut 8×8 RTR (1) FlySky 6-channel radio system (1) 2S 7.4V 1100mAh LiPo battery (1) USB charger Preinstalled winch, LEDs, and electronics Needed to Complete Nothing — Ready to Run    

Read more less

Take your CR18P to the next level with a true Servo-On-Axle (SOA) setup. This CNC-machined aluminum conversion eliminates flex, improves steering precision, and adds low-mounted weight where it matters most for crawling performance. More control. More strength. More capability. 🏁 Why Go SOA? Moving the servo onto the axle improves steering response and geometry while reducing slop and flex found in chassis-mounted setups. Combined with the added aluminum strength, this upgrade transforms how your CR18P handles technical terrain. 🛠 Design & Construction Precision CNC-machined from high-quality aluminum, this front portal axle upgrade: Eliminates unwanted flex from stock composite components Adds unsprung weight down low for improved traction Increases structural integrity of the drivetrain Enhances steering precision and consistency The anodized finish adds both durability and clean visual appeal — performance with style. 💪 Performance Benefits CNC-machined aluminum construction Eliminates steering flex Improves stability on climbs Increases traction over obstacles Boosts control in technical terrain Adds eye-catching upgrade “bling” 📦 Includes (1) Aluminum Servo Mount (2) Aluminum Steering Links (2) Composite Upper Suspension Links (2) Pivot Balls (2) Zip-Ties Mounting Hardware 🔧 Compatibility HobbyPlus CR-18 If you're serious about tightening up your steering and improving crawling stability, this SOA conversion is one of the most impactful upgrades you can make to your CR18P.    

Read more less

  The Hobbywing 1/10 ESC Switch is a direct replacement for a wide range of Hobbywing electronic speed controls that use a slider-style on/off switch. If your original switch becomes worn, damaged, or unreliable, this replacement restores proper operation with a factory-fit feel. Compatible with popular ESCs such as the Justock, XeRun 120A V2.1, QuicRun 10BL60-Sensored, and other Hobbywing 1/10 ESCs using this same switch format. Features Genuine Hobbywing replacement part Restores reliable on/off control Slider-style switch for smooth operation Compatible with multiple Hobbywing 1/10 ESC models Easy plug-in installation Compatibility Justock ESC XeRun 120A V2.1 QuicRun 10BL60-Sensored Other Hobbywing 1/10 ESCs equipped with a slider switch

Read more less

The Hobbywing Electronic Power Switch Fusion (EPS) replaces traditional mechanical on/off switches with a highly reliable, vibration-proof, electronically controlled power switch. By eliminating moving contacts, this switch prevents issues caused by oxidation, dust, moisture, or mechanical wear — delivering a more dependable solution for high-performance RC vehicles. Designed for seamless integration with Hobbywing Fusion systems, it’s a simple and effective upgrade that improves long-term durability and consistent power delivery. Features Electronic ON/OFF switching for increased reliability No mechanical contacts — eliminates issues from vibration or oxidation Compact and lightweight design Simple plug-and-play installation Ideal for crawling, trail rigs, and Fusion-equipped vehicles Compatible With Hobbywing Fusion SE Hobbywing Fusion Pro Hobbywing Fusion Elite

Read more less

The Hobbywing Electronic Power Switch for Justock ESCs replaces traditional mechanical switches with a reliable, electronically controlled solution. By removing moving contacts, this EPS unit prevents failures caused by vibration, dust, oxidation, or wear — making it a more dependable option for spec racing, club racing, and general use. Designed specifically for Hobbywing Justock systems, it provides clean, consistent ON/OFF control with simple installation. Features Electronic ON/OFF switching for improved durability Eliminates issues caused by vibration or oxidized mechanical contacts Compact, lightweight, and easy to install Ideal for Justock-based 1/10 racing platforms Compatible With XeRun Justock G3 XeRun Justock G3S

Read more less

⚡🏁 High-Power Sensored Performance for 1/10 Trucks & Monster Trucks The Hobbywing EZRun 3665SD G3 Sensored Brushless Motor delivers powerful, smooth, and responsive performance for high-output 1/10 scale trucks and monster trucks. The 4000kV version is a 4-pole motor designed for 2S-3S LiPo power, making it an excellent choice for drivers looking for strong acceleration and serious top-end performance. Designed to pair perfectly with the EZRun MAX10 G2 ESC, the G3 motor features an improved sensored system, high-precision Hall sensors, upgraded cooling, and a waterproof/dustproof design for reliable performance in demanding conditions. ⚙️ About the EZRun 3665SD G3 🎯 Smooth Sensored Control High-precision Hall sensor components provide accurate rotor-position detection for excellent throttle linearity and smooth power delivery. The upgraded sensor interface also allows motor temperature protection when paired with compatible Hobbywing electronics. 🔥 Improved G3 Performance Compared with the previous-generation motor, Hobbywing reports improved efficiency, reduced operating temperatures under the same load, and increased maximum output power. The internal design also uses high-quality bearings, high-temperature copper wire, an explosion-resistant rotor, and a high-tolerance alloy shaft. 💦 Built for Tough Conditions The waterproof and dustproof construction helps protect the motor when running through mud, sand, snow, and other demanding environments, making it well suited for performance bashing and off-road use. 🔧 Features 4000kV sensored brushless motor Designed for 1/10 trucks and monster trucks 4-pole motor design Compatible with 2S-3S LiPo power High-precision Hall sensor system Smooth, linear throttle response Improved efficiency and cooling over the previous generation Waterproof and dustproof construction High-precision bearings 5mm output shaft Modular construction for easier maintenance Designed to pair with the Hobbywing EZRun MAX10 G2 ESC 📦 Includes (1) Hobbywing EZRun 3665SD G3 4000kV Sensored Brushless Motor (1) User Manual (1) Hobbywing Decal 📊 Specifications Specification Details Brand Hobbywing Part Number 30402608 Model EZRun 3665SD G3 Motor Type Sensored Brushless kV Rating 4000kV LiPo Compatibility 2S-3S Poles 4 Motor Diameter 37mm Motor Length 65.8mm Shaft Diameter 5mm Shaft Length 16.5mm No-Load Current ≤8.2A Weight 297.2g Application 1/10 Truck / Monster Truck

Read more less

🔥 Unleash Maximum Power with Smarter Control!This powerful ESC and motor combo brings advanced sensored brushless performance to your 1/10 4WD truck or monster truck. With IP67 waterproofing, smart start-stop tech, and unmatched control feel, the MAX10 G2 + 3665SD G3 4000kV combo delivers the torque and throttle response to dominate any terrain. ⚙️ ESC Features: 140A continuous / 880A burst current Smart start-stop tech – quieter and more efficient Up to 32° Turbo Timing for max speed Waterproof & dustproof (IP67) Smart Freewheeling = Cooler temps, higher efficiency Real-time data logging & mobile app support (with optional OTA module) High-efficiency BEC: 6V/7.4V @ 5A ⚙️ Motor Specs: Kv Rating: 4000Kv 4-pole sensored brushless motor Size: 3665SD (37mm x 65.8mm) Shaft: 5mm x 16.5mm No-load Current: 8.2A Weight: 304.5g LiPo: 2–3S compatible 📦 Includes: (1) EZRun MAX10 G2 140A ESC (XT60 plug) (1) EZRun 3665SD G3 4000kV Brushless Motor (1) Sensor Cable ✅ Ideal For:1/10 4WD Short Course • Monster Trucks • Heavy Bashers 💪 More power, cooler temps, smarter features. Ready to upgrade? This Hobbywing combo is the gold standard in next-gen brushless performance.

Read more less

🔥 Smaller Package. Big-Time Performance.The Hobbywing EZRun MAX10 G2 80A ESC is the perfect blend of power, precision, and protection for 1/10 on-road cars, buggies, lightweight SCTs, and trucks. Built with smart sensored brushless tech, this ESC delivers buttery smooth throttle response and a huge performance boost—up to 25% more speed when paired with the Hobbywing 3652 G3 motor! 🧠 Packed with Features: 80A continuous / 520A burst current IP64-rated waterproofing Supports turbo timing up to 32° Smart fan control (fan runs only when needed) 74% more capacitor capacity than previous MAX10 Overheat protection & smart freewheeling for efficiency Real-time data monitoring and data logging (with optional OTA module) 📏 Specifications: Battery Input: 2S–3S LiPo BEC: 6V/7.4V @ 5A (Switch-mode) Motor Limit: 2S: <6000Kv 3S: <4200Kv (3652 size motor) Dimensions: 53 x 39.5 x 37.2mm Weight: 120g (w/ wires) Application: 1/10 On-Road, Buggy, Light SCT, Monster Truck Cooling Fan: Included, BEC powered 📦 Includes: (1) EZRun MAX10 G2 80A ESC Hobbywing Decal User Manual ⚙️ Need control and cool temps on your 2S/3S setup?The MAX10 G2 80A delivers elite performance with smart tech to back it. Race harder, run cooler, and go faster—without compromise.

Read more less

Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo – 1/4 & 1/5 Scale Powerhouse! 🔥 The Ultimate High-Voltage Brushless Combo for Large-Scale RCs! 🚗💨 Take your 1/4 and 1/5 scale RC vehicles to the next level with the Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo! Designed for heavy-duty off-road trucks, truggies, and monster vehicles, this high-voltage system delivers incredible torque, extreme power, and cutting-edge protection features to handle even the most demanding terrains. 🏆 Whether you're tearing through sand, snow, mud, or rocky terrain, this sensorless brushless system provides smooth acceleration, consistent power delivery, and extreme durability for the world’s largest RC vehicles! ✨ Key Features: ⚡ Extreme 300A Continuous / 2000A Peak Current – Unleashes massive power for large-scale vehicles 🔋 6-12S LiPo Compatibility – Supports high-voltage setups for extreme performance 🔥 70125 560KV Four-Pole Brushless Motor – Delivers incredible torque and top speed 🛠️ Waterproof & Dustproof Design – Handles mud, snow, and extreme weather conditions 💨 Built-in Fireproof Circuitry – Prevents electrical damage and enhances safety 📊 Real-Time Data Logging – Monitor performance using the HW LINK app (OTA Bluetooth module required) 🔩 Ultra-Powerful Switch Mode BEC (10A Continuous, 25A Burst) – Adjustable 6V/7.4V/8.4V output 🚀 Advanced Protection Features – Includes low-voltage cutoff, thermal safeguards, signal loss, and current protection 📦 What’s in the Box? (1) Hobbywing EZRUN MAX4 ESC (1) Hobbywing EZRUN 70125 560KV Brushless Motor (1) Double-Sided Tape (2) Heat Shrink Tubes (1) User Manual 📖 (1) Hobbywing Decal Sheet 📊 Motor Specifications – Hobbywing EZRUN 70125 560KV Part Number: 30402850 Poles: 4 KV Rating: 560KV No-Load Current: 3.6A Resistance: 0.0050Ω Motor Dimensions: 70mm (2.76") x 125mm (4.92") Shaft Diameter & Length: 8mm (0.315") x 30mm (1.181") Weight: 1995g LiPo Compatibility: 8-12S LiPo Recommended ESC: Hobbywing MAX4 HV ⚡ ESC Specifications – Hobbywing EZRUN MAX4 Scale Compatibility: 1/4 & 1/5 Heavy-Duty Off-Road, Truck, Monster Continuous/Peak Current: 300A / 2000A Motor Compatibility: Sensored & Sensorless Brushless Motors Input Voltage: 6-12S LiPo Motor Limit (12S LiPo): ≤600KV (70125 Size Motor) BEC Output: Adjustable 6V / 7.4V / 8.4V, 10A Continuous, 25A Burst Waterproof: Yes Switch Type: Electronic Capacitor Protection: Yes Size (L x W x H): 125mm x 85mm x 61.7mm Weight: 775.4g 📌 Tech Note: Supports LED Program Card, LCD Program Box, and OTA Programmer (optional) for ESC parameter tuning. 🏁 Conquer Any Terrain with Unmatched Power! 🔥 Built for the biggest and most powerful RC vehicles, the Hobbywing EZRUN MAX4 ESC & 70125 560KV Motor Combo delivers unrivaled durability, extreme torque, and high-speed performance for off-road monsters, truggies, and heavy-duty RC trucks. 💨 Upgrade now and experience the world’s most powerful RC system! 🏆🏁

Read more less

The Hobbywing EZRun MINI28 Sensored Brushless ESC delivers next-level control and tuning in a tiny footprint — purpose-built for competitive 1/28-scale racing. Don’t let the size fool you… this ESC is absolutely loaded with features normally seen only on full-size race systems. At just 22.7 × 14.2 × 11.8mm, it fits cleanly into nearly any Mini-Z–style chassis, while the integrated aluminum heat sink keeps temps under control during hard runs. With 26 adjustable parameters, a high-voltage BEC, and OTA wireless programming (via optional module), the MINI28 gives racers every tuning edge possible. Key Features Designed specifically for 1/28-scale racing performance Ultra-compact and lightweight for tight chassis layouts Large integrated aluminum heat sink for temperature control High-voltage adjustable BEC (6V or 7.4V, 3.5A peak) Compatible with sensored and sensorless brushless motors Dual-mode App support (requires optional Hobbywing OTA module) Packed with 26 adjustable ESC tuning parameters Ideal for Mini-Z, GL Racing, PN, and other 1/28 platforms Specifications Continuous / Peak Current: 30A / 80A Motor Type: Sensored or Sensorless Brushless Motor Limit: 1626 size motors Battery: 2S LiPo BEC Output: 6V / 7.4V adjustable, 3.5A peak Dimensions: 22.7 × 14.2 × 11.8mm Weight: 5g (without wires) Programming: Via throttle cable or OTA module (sold separately) Includes (1) Hobbywing EZRun MINI28 Sensored Brushless ESC (1) ESC Manual Wiring harnesses

Read more less

Unlock next-level speed and precision for your 1/28th-scale racer. The Hobbywing EZRun MINI28 Sensored Brushless Combo delivers an insane amount of performance in an ultra-compact package — combining a feature-rich ESC with a powerful, smooth 1626 sensored brushless motor. Designed specifically for competitive Mini-Z-style 1/28 racing, this combo gives you the control, adjustability, and efficiency needed to dominate tight layouts and technical tracks. About the EZRun MINI28 System Micro Size, Monster Performance The MINI28 ESC is tiny — just 22.7×14.2×11.8mm — but packed with advanced tuning options, including 26 adjustable parameters, a high-voltage adjustable BEC, and full compatibility with the Hobbywing OTA Module (sold separately) for smartphone programming. The included 1626 3500Kv sensored brushless motor delivers zero-cogging startup, crisp low-speed control, and big power up top. When paired with the MINI28 ESC, timing boost can drastically increase RPM for max straight-line speed. ESC Features Built specifically for 1/28 scale racing Ultra-compact and lightweight — fits almost any chassis Integrated aluminum heat sink for consistent temps Dual-mode app support (with optional OTA module) Sensored & sensorless brushless compatibility Adjustable high-voltage BEC (6V / 7.4V, 3.5A peak) ESC Specifications Continuous / Peak Current: 30A / 80A LiPo: 2S BEC: 6V/7.4V adjustable (3.5A peak) Size: 22.7×14.2×11.8mm Weight: 5g Motor Limit: 1626 size Motor Features (1626 – 3500Kv) Zero-cogging, ultra-smooth startup Excellent efficiency & cool operation Precision response and consistent torque Modular design for easy cleaning & maintenance Massive top-speed gains when using ESC timing Motor Specifications kV: 3500 Poles: 2 Input Voltage: 2S Diameter: 16mm Length: 26mm Shaft: 1.8mm x 8.5mm Weight: 18g Includes (1) EZRun MINI28 Sensored Brushless ESC (1) EZRun 1626 Sensored Brushless Motor (3500Kv) Wiring harnesses ESC Manual  

Read more less

Compatible with: XR10 PRO G2S Stealth / Max10 80A Keep your ESC cool under race heat with the Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan. Designed specifically for the XR10 PRO G2S Stealth and Max10 80A ESCs, this precision fan delivers high-RPM airflow with a frameless, low-drag design that maximizes efficiency and reduces noise. The G25’s compact profile fits tight racing setups while maintaining optimal heat management to protect critical electronics lap after lap. ⚡ Features: ✅ OEM replacement for Hobbywing XR10 PRO G2S Stealth and Max10 80A ESCs 🌪️ Frameless Cyclone Design provides superior airflow with minimal resistance 🔋 6 V operation for smooth, reliable cooling performance ⚙️ High-RPM brushless motor keeps ESC temperatures stable under load 💪 Compact 25×25×10 mm size for tight installations and low weight 🧠 Smart voltage guidance ensures proper pairing with your power system 📊 Specifications: Model: G25 Stealth 2510BH-6V Input Voltage: 6 V Size: 25 × 25 × 10 mm Design: Frameless Cyclone Recommended ESCs: Hobbywing XR10 PRO G2S Stealth, Max10 80A Weight: ≈ 10 g ⚙️ Voltage Selection Notes: 4–6 cell NiMH / 2S LiPo: Use included 5 V fan 7–9 cell NiMH / 3S LiPo: Use 12 V fan or power 5 V fan from receiver (+6 V) 10–12 cell NiMH / 4S LiPo: Use 12 V fan and external UBEC to power receiver 📦 Includes: (1) Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan 💡 Pro Tip:For the longest fan life, keep debris out of the blades and avoid running the fan when submerged or coated in tire compound dust — a quick blast of compressed air between runs keeps performance consistent.  

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

  📱 Wireless Tuning. Total Control.Ditch the cords and take full control of your ESC with the Hobbywing OTA Programmer. Designed to work with select Xerun, EzRun, Platinum, and Seaking ESCs, this compact module connects wirelessly to your smartphone using the HW Link App—giving you the power to fine-tune ESC settings, record real-time data, and even update firmware on the go. 🎯 Key Features: Real-time wireless tuning via the HW Link App Graphical interface with drop-downs and sliders for easy setup Built-in data logging and memory storage Seamless Bluetooth transmission One-touch factory reset Compact, lightweight design 📐 Specifications: Voltage: 5–12.6V Bluetooth Version: ≤ 4.0 Range: 0–3m (open field) Size: 30.0 x 25.5 x 8.5mm Weight: 10.2g 💡 Note: Compatible only with supported ESCs. Please check your ESC manual for compatibility. Download the HW Link V2 App for optimal performance. 🎮 Your ESC. Your Way.Whether you're dialing in race settings or checking temps after a bash session, this OTA module makes managing your ESC easier, faster, and smarter.

Read more less

Simplify your crawler build while gaining incredible control with the Hobbywing QuicRun Fusion SE FOC 2-in-1 System. This integrated ESC and brushless motor combo delivers ultra-smooth throttle response, strong low-speed torque, and a compact installation perfect for modern scale crawlers and trail trucks. Powered by FOC (Field-Oriented Control) technology, the Fusion SE offers unmatched smoothness and precision when navigating technical terrain. 🧗 Built for Crawling Performance The Fusion SE is designed specifically for 1/10 rock crawlers and trail trucks, delivering exceptional low-speed control and smooth startup behavior. FOC driving mode produces strong torque and precise throttle modulation, giving you the confidence to tackle steep climbs, tight rock sections, and technical obstacles. Integrated cruise control and hill descent features further improve drivability on difficult terrain. ⚡ Compact 2-in-1 Design By combining the ESC and motor into a single unit, the Fusion SE dramatically simplifies wiring and installation. Benefits include: Reduced wiring clutter Easier chassis layout Lower overall weight Cleaner installation Perfect for scale builds where space and simplicity matter. 🌧 Waterproof & Trail Ready With an IP67 waterproof rating, the Fusion SE is ready for harsh outdoor environments. Mud, snow, water crossings, and dusty trails are no problem for this sealed electronics system. 🏁 Features Integrated ESC and motor design Advanced FOC technology for ultra-smooth control Excellent low-speed torque and throttle precision Sine wave drive for quieter and more efficient operation Intelligent torque output and speed control Cruise control and hill descent capability Adjustable active drag brake Multiple protection systems for reliability IP67 waterproof and dustproof design Compatible with Hobbywing LED program box 📦 Includes (1) Hobbywing QuicRun Fusion SE FOC 2-in-1 ESC & Motor System (1200kV) 📊 Specifications Application: 1/10 Rock Crawler / Trail Truck Motor Type: Brushless (Integrated ESC) kV Rating: 1200kV Voltage Input: 2–3S LiPo / 6–9 Cell NiMH Continuous Current: 40A Motor Diameter: 36mm Motor Length: 58.1mm Shaft Diameter: 3.175mm Shaft Length: 16.5mm Motor Poles: 4 Waterproof Rating: IP67 Connector: XT60 Programming: Hobbywing LED Program Box (sold separately) Weight: 201g (including wires & connectors) If you're building a crawler that demands smooth control, compact electronics, and reliable trail performance, the Hobbywing Fusion SE is one of the best plug-and-play systems available.

Read more less

🏁⚡ Competition Stock Power with Torque-Focused Performance The Hobbywing XeRun V10 G5 Competition Stock 13.5T Torque Brushless Motor delivers the latest generation of Hobbywing stock racing performance. Developed to the same demanding standards as Hobbywing's team competition motors, the G5 offers increased output power, improved efficiency, better thermal performance, and optimized weight distribution compared to the previous generation. The Torque configuration emphasizes strong acceleration and responsive power delivery, making it an excellent choice for racers who need punch coming out of corners and consistent performance on technical layouts. 🏎️ About the XeRun V10 G5 💪 13.5T Torque Performance Rated at 3900Kv, this 13.5T Torque version provides a strong combination of speed and acceleration for competitive stock racing. Hobbywing offers the G5 in both Speed and Torque configurations, allowing racers to choose a motor better suited to their track layout, available grip, and preferred power delivery. 🎯 Advanced Tunability Adjustable Hall timing and Hall sensing distance give racers greater control over the motor's characteristics. These adjustments allow the motor to be fine-tuned for throttle response and power delivery based on gearing, ESC settings, track conditions, and driving style. ❄️ Improved Cooling & Efficiency The redesigned G5 structure provides improved heat dissipation and efficiency to help maintain consistent performance throughout a race. Its lightweight construction and optimized center of gravity also help reduce unnecessary weight while keeping mass properly positioned in the chassis. 🔧 Modular Construction A modular design makes routine maintenance and servicing easier, allowing racers to keep the motor in peak condition throughout the racing season. 🔧 Features Competition-spec 13.5T sensored brushless motor Torque configuration for strong acceleration and punch 3900Kv rating Increased output power over the previous generation Improved efficiency and thermal performance Lightweight design with optimized center of gravity Adjustable Hall timing system Adjustable Hall sensing distance Available in Speed and Torque configurations Advanced cooling design for improved heat dissipation Modular construction for easier maintenance 2-pole competition motor design 📦 Includes (1) Hobbywing XeRun V10 G5 Competition Stock Brushless Motor – 13.5T Torque (1) Sensor Cable 📊 Specifications Specification Details Part Number 30401763 Motor Series XeRun V10 G5 Version Torque Motor Type Sensored Brushless Turns 13.5T Kv Rating 3900Kv Input Voltage 1–3S Pole/Slot 2 Motor Length 2.04in (51.9mm) Motor Diameter 1.41in (35.8mm) Shaft Diameter 1/8in (3.175mm) Weight 4.87oz (138g) 🏁 Application Ideal for 13.5T stock-class racing where strong acceleration and responsive torque delivery are desired, including compatible 1/10-scale off-road racing applications. ⚠️ Notes This is the Torque version of the 13.5T XeRun V10 G5. Hobbywing also offers a Speed version for racers looking for different power characteristics based on track size and grip level. Verify your racing organization's motor and ESC regulations before competition use.    

Read more less

🏁⚡ Competition-Level Torque & Efficiency for Stock Class Racing The Hobbywing XeRun V10 G5 Competition Stock 17.5T Torque Brushless Motor is engineered for racers looking for maximum performance from a stock-class power system. Building on the proven V10 platform, the fifth-generation G5 features increased output, improved efficiency, optimized weight distribution, and enhanced cooling for consistent performance throughout demanding race conditions. This Torque version is tuned to emphasize strong low-end and mid-range power delivery, making it an excellent choice for technical layouts where acceleration and drive out of corners are critical. 🏎️ About the XeRun V10 G5 💪 Torque-Tuned 17.5T Performance The Torque version of the V10 G5 is designed for racers who prioritize punch and acceleration. Its power characteristics make it especially well suited to technical tracks and layouts where quickly building speed out of corners can provide an advantage. 🎯 Advanced Motor Tuning Adjustable Hall timing and Hall sensing distance give racers additional control over motor characteristics. These adjustments allow experienced racers to fine-tune throttle response and power delivery to better suit track conditions, gearing, ESC settings, and driving style. ❄️ Improved Cooling & Efficiency The redesigned G5 structure improves heat dissipation and operating efficiency while optimizing the motor's center of gravity. Better thermal management helps maintain more consistent performance throughout a race while the lightweight construction minimizes unnecessary weight. 🔧 Racer-Friendly Modular Construction A modular design simplifies disassembly and maintenance, making it easier to inspect and service the motor between race weekends while keeping the power system operating at its best. 🔧 Features Competition-spec 17.5T sensored brushless motor Torque-tuned version for strong acceleration and punch Increased output power over the previous generation Improved efficiency and thermal performance Lightweight construction Optimized center of gravity Adjustable Hall timing system Adjustable Hall sensing distance Advanced cooling and heat dissipation Modular construction for easier maintenance 2-pole competition motor design Includes sensor cable 📦 Includes (1) Hobbywing XeRun V10 G5 Competition Stock Brushless Motor – 17.5T Torque (1) Sensor Cable 📊 Specifications Specification Details Part Number 30401764 Motor Series XeRun V10 G5 Version Torque Motor Type Sensored Brushless Turns 17.5T Kv Rating 3000Kv Input Voltage 1–3S LiPo Pole/Slot 2 Motor Length 2.04in (51.9mm) Motor Diameter 1.41in (35.8mm) Shaft Diameter 1/8in (3.175mm) Weight 4.87oz (138g) 🏁 Application Ideal for 17.5T stock-class RC racing, particularly applications where strong torque and acceleration are preferred, including: 1/10 2WD Buggy 1/10 4WD Buggy 1/10 Stadium Truck 1/10 Short Course Other compatible 17.5T stock racing classes ⚠️ Notes This is the Torque version of the 17.5T V10 G5. For racers choosing between Hobbywing's Speed and Torque versions, the Torque model favors stronger acceleration and low-to-mid RPM power, while the Speed version is intended to favor higher-RPM performance. Always verify your track or racing organization's motor rules before competition use.  

Read more less

The Hobbywing XR10 Pro 1S Stock Spec is built for elite 1/12 and 1/10 stock-class racing, delivering ultra-smooth control in a compact, lightweight package. At just 31.6×25.8×16.2mm and 20% smaller than the standard XR10 Pro 1S, this ESC gives you more room and better weight balance options inside tight pan-car chassis layouts. Despite its size, it packs serious performance with advanced tuning, data logging, and a boosted internal BEC capable of running high-demand servos without an extra battery. Features Designed specifically for 1S stock-class racing Ultra-compact size (20% smaller than standard XR10 Pro 1S) Lightweight at 23.5g (w/o wires) for better chassis balance Built-in boost BEC: 6A output, adjustable 6V–7.4V Five preset racing profiles included Adjustable throttle & brake PWM frequencies for precision control Fully sensored ESC for smooth and consistent throttle feel Wireless programming via optional Hobbywing WiFi Express module Built-in electronic switch with 50,000+ cycle lifespan Data logging for motor temps, ESC temps, RPM, and more Firmware upgrade support Specifications Continuous / Peak Current: 80A / 380A Input Voltage: 1S LiPo or 3–4 cell NiMH BEC Output: 6V/7.4V @ 3A Wires: Black 14AWG, 200mm Connectors: None included Programming: LCD Program Box or WiFi Module Dimensions: 31.6 × 25.8 × 16.2 mm Weight: 23.5g (without wires) Applications: 1/12 & 1/10 on-road stock-class, 1S setups Motor Limit: ≥10.5T, 3650-size Why Racers Choose It If you’re running 1S pan cars and want elite throttle precision, small footprint, reliable cooling, and full data-logging capability, the XR10 Pro 1S Stock Spec is one of the strongest options in high-level racing.

Read more less

🏁⚡ Precision Power & Control for Competitive RC Racing!Take control of your racing setup with the Hobbywing XeRun XR10 Pro Legacy 150A Sensored Brushless ESC! Designed for competitive 1/10 scale electric racing, this electronic speed controller delivers powerful brushless motor control, smooth throttle response, and the adjustability racers need to fine-tune their performance.🏁 About the XeRun XR10 Pro Legacy⚡ 150A Brushless PerformanceWith a 150A continuous current rating, the XR10 Pro Legacy is built to handle the demands of high-performance 1/10 scale racing applications.🎮 Smooth Sensored Motor ControlDesigned for sensored brushless motors, this ESC provides precise throttle response and smooth power delivery, helping drivers maintain control through technical sections and accelerate confidently out of corners.⚙️ Race-Focused TuningAdjustable ESC settings allow racers to fine-tune throttle response, braking behavior, and power delivery to suit different track conditions, motor combinations, and driving styles.🏎️ Built for Competitive RacingPart of Hobbywing's proven XeRun racing lineup, the XR10 Pro Legacy is designed for drivers looking for consistent performance and customizable electronic speed control.✨ Features✔ Hobbywing XeRun XR10 Pro Legacy ESC✔ 150A continuous current rating✔ Sensored brushless motor compatibility✔ Smooth, precise throttle response✔ Adjustable performance settings✔ Tunable braking and throttle characteristics✔ Designed for competitive 1/10 scale electric racing✔ Suitable for compatible on-road and off-road racing applications✔ Part of Hobbywing's XeRun performance lineup📦 Includes (1) Hobbywing XeRun XR10 Pro Legacy 150A Sensored Brushless ESC🔧 Compatibility Compatible 1/10 scale electric RC racing vehicles Compatible sensored brushless motor systems Verify motor, battery, and installation requirements before use📊 Specifications Brand: Hobbywing Series: XeRun XR10 Pro Legacy Part Number: 30112800 ESC Type: Sensored Brushless Continuous Current: 150A Application: 1/10 Scale RC Racing📝 Notes Electronic speed controller only; motor, battery, and vehicle are sold separately. Confirm supported battery voltage and motor limits before installation. Programming accessories may be required for advanced tuning. Follow Hobbywing's installation and calibration instructions before operating.    

Read more less

Hobbywing Xerun XR14 Sensored Brushless ESC/2848SD Motor Combo (2800kV) 🔥 High-Performance Brushless ESC & Motor Bundle! 🚗💨 Elevate your 1/14 scale on-road and off-road performance with the Hobbywing Xerun XR14 Sensored Brushless ESC & 2848SD Motor Combo (2800kV)! This combo pairs a competition-grade ESC with a high-efficiency brushless motor, delivering smooth throttle response, powerful acceleration, and superior durability. 🏆 Whether you're racing in Blinky or Boost formats, the sensored system ensures precise control, low-speed smoothness, and high-speed stability—making it the perfect choice for serious RC racers. ✨ Key Features: ⚡ 70A Continuous Output Current – Stable and reliable power under intense race conditions 🛠️ 26 Adjustable Parameters – Fine-tune throttle, braking, boost/turbo timing, and more 🔥 Full-Metal Heat Sink Case – Optimized cooling for extended performance 🔋 Reverse Polarity & Thermal Protection – Prevents damage from incorrect battery connections 🛞 4-Pole Motor Design – Ultra-smooth acceleration and efficient power delivery 📊 Built-In Data Recording – Access performance stats via the Hobbywing Link App 💨 Adjustable PWM & Brake Frequency – Customizable for both on-road and off-road racing 🏁 IP5X Dustproof Motor Protection – Designed for durability in harsh environments 📦 What’s in the Box? (1) Hobbywing Xerun XR14 Sensored Brushless ESC (1) Hobbywing Xerun 2848SD 4-Pole 1/14 Brushless Motor (2800kV) 🔥 (1) Cooling Fan 🌀 Factory Decals & Accessories Product Manual 📖 📊 ESC Specifications: Suggested Applications: 1/14 On-Road & Off-Road Racing, 1/12 & 1/10 Light Load Vehicles Motor Type: Sensored/Sensorless Brushless Input Voltage: 2S LiPo (7.4V) Continuous Current: 70A Peak Current: 300A Motor Limits: 540-Size (>6000kV or 8.5T) BEC Voltage: 6V/7.4V at 4A Battery & Motor Connectors: Solder ⚡ Motor Specifications: Motor Type: Sensored Brushless kV Rating: 2800kV Input Voltage: 2S-3S LiPo (7.4V-11.1V) Adjustable Timing: 20-40° Diameter x Length: 1.12 x 1.89 in (28.5 x 48mm) Shaft Diameter: 0.13 in (3.175mm) Weight: 3.52 oz (100g) Poles: 4 Application: 1/14 or 1/12 On-Road & Off-Road 📌 Tech Note: The OTA Programmer (HWA30850400) or LCD Program Box Pro (HWA30502002) is required to access data logging for throttle, voltage, temperature, RPM, vehicle speed, and more. 🏁 Take Your Racing to the Next Level! 🔥 Whether you're fine-tuning your setup for maximum efficiency or pushing for top-speed dominance, the Hobbywing Xerun XR14 ESC & 2848SD Motor Combo delivers race-winning performance and ultimate reliability. 💨 Upgrade today and dominate the track with Hobbywing! 🏆🏁  

Read more less