Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/4400mAh) – 140C Burst Ultra-Lightweight. High Voltage. Race-Ready. The Gens Ace Redline 2.0 4400mAh Shorty LiHV delivers elite-level performance in a compact, lightweight design. Perfect for modified and stock class racing, this pack uses Silicon Graphene technology for ultra-efficient discharge, reduced heat, and excellent cycle life — all in a low-profile shorty layout for ideal chassis balance. ⚙️ Features: ⚡ 140C Continuous Discharge – smooth, consistent power when it matters most 🔋 7.6V LiHV / 4400mAh Capacity – lightweight performance for serious racers 🔌 5mm Bullet Connectors – high-amp, secure, and reliable power transfer 🪶 Ultra Low-Profile Shorty Pack – minimal weight, maximum agility 🧪 Matched cells and advanced stacking for stable output and long life 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4400mAh Continuous Discharge: 140C Configuration: 2S1P Watt Hours: 33.44Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 18mm Weight: 163.1g (5.75oz) 🏁 For racers demanding every ounce of power in a nimble format, the Redline 2.0 4400mAh Shorty delivers blazing-fast response and unbeatable efficiency on the track.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/5000mAh) – 140C Burst Unleash the Voltage – Dominate the Track The Gens Ace Redline 2.0 LiHV Shorty Battery is built for serious RC racers looking for explosive acceleration, sustained voltage, and consistent performance. Featuring ultra-low internal resistance and a massive 140C discharge rating, this lightweight pack delivers big power in a compact footprint — perfect for 1/10 scale racing applications. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power for competitive racing 🔋 7.6V 2S LiHV / 5000mAh Capacity – extended runtime with high-voltage punch 🔌 5mm Bullet Connectors – secure, high-amp power delivery 📏 Shorty LCG design – low-profile for improved chassis balance and handling ✅ Factory-matched cells for consistency and efficiency 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 5000mAh Continuous Discharge: 140C Max Charge Rate: 1C (5.3A) Configuration: 2S1P Watt Hours: 38Wh Connector Type: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 46 x 19mm Weight: 177g (6.24oz) 🏁 Whether you're battling it out on high-traction carpet or slick dirt tracks, the Gens Ace Redline 2.0 Shorty brings unmatched burst and endurance to your race day setup.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Gens Ace Redline 2.0 4S LiHV Battery 140C (15.2V/6300mAh) w/5.0mm Bullet Part Number: GEA6300140P4S5B Deliver elite-level performance with the Gens Ace Redline 2.0 4S LiHV 140C Battery. Designed for serious racers, this high-discharge LiHV pack offers incredible punch, stable voltage output, and a lightweight footprint to maximize efficiency and speed on the track. ✅ Features: ⚡ 140C high discharge rate for extreme power delivery 🔋 15.2V LiHV (High Voltage) design for improved performance over standard LiPo 🧩 Factory-matched cells ensure optimal voltage, resistance, and capacity consistency 🧱 Low-profile, compact design for better weight distribution 🧊 Low internal resistance for stable output and long cycle life 🔌 5.0mm bullets for power, 2.0mm bullets for balancing ⚠️ LiPo Safety Notice: Always use a LiPo-specific charger Never charge unattended or above recommended voltage Always balance charge and store in a LiPo safe bag/box Do not over-discharge (keep cell voltage above 3.2V) Let the pack cool before recharging 📦 Includes: (1) Gens Ace Redline 2.0 4S LiHV 140C 6300mAh Battery (5.0mm bullet-style main connector & 2.0mm balance port 📐 Specifications: Voltage: 15.2V (4S LiHV) Capacity: 6300mAh Discharge Rate: 140C Continuous Charge Rate: 1C (6.3A Max) Cell Configuration: 4S1P Connector: 5.0mm Bullet (Main), 2.0mm Bullet (Balance) Dimensions: 5.47 x 1.8 x 1.45 in (139 x 47 x 37 mm) Weight: 15.9 oz (452g) Watt Hours: 95.76Wh Unleash race-ready performance with the Gens Ace Redline 2.0 — the choice of champions.

Read more less

  Easily connect batteries and electronics with different plug types using the Gens Ace XT60 Male to Deans (T) Female Adapter Cable. Perfect for racers and bashers who want quick compatibility without rewiring. Features: XT60 Male to Deans (T) Female adapter for versatile connectivity High-quality construction for safe, efficient power transfer Compact design for easy use in tight spaces No soldering required — plug-and-play convenience A handy tool for your RC pit box to keep you running, no matter what connectors you’re working with.

Read more less

The Goosky E2 UH-1Y Air Rescue Helicopter combines stunning scale realism with advanced smart-flight technology to create one of the most exciting RC helicopter experiences available today. Featuring GPS positioning, LiDAR stabilization, dual brushless direct-drive motors, and hands-free hovering capability, this 1/35 scale UH-1Y Venom delivers smooth, stable flight for beginners while still offering the performance experienced pilots crave.  ⚡ Features: 🚁 Highly detailed 1/35 scale UH-1Y Air Rescue helicopter design📡 GPS positioning and LiDAR stabilization for ultra-stable hovering⚙️ Dual brushless direct-drive motor system for smooth, efficient power🧠 Smart flight control system with beginner-friendly flight assistance🔄 Hands-free hover and intelligent return functions📱 Advanced flight modes for both new and experienced pilots🎮 2.4GHz rechargeable transmitter included🧳 Includes carrying case for easy transport and protection🔋 Includes Smart LiPo battery and dedicated charger🏁 Ready-To-Fly — minimal setup required 📏 Specifications: Part Number: BAF050006-AScale: 1/35Rotor Diameter: 490mmBody Length: 483mmHeight: 132mmWeight: 538gBattery: 3S 11.1V 1600mAh Smart LiPoFlight Time: Approximately 15 MinutesControl Distance: Approximately 300 MetersMotor Type: Dual Brushless Direct DriveCharging Time: Approximately 90 Minutes 📦 Includes: (1) Goosky E2 UH-1Y Air Rescue Helicopter(1) 2.4GHz Rechargeable Transmitter(1) 3S Smart LiPo Battery(1) Dedicated Charger(1) Carrying Case(1) User Manual 🔧 Perfect For: Beginner helicopter pilots wanting GPS-assisted stabilityScale helicopter enthusiastsIntermediate pilots looking for smooth, realistic flyingCollectors wanting an ultra-detailed UH-1Y Venom replica 💡 Pro Tip: The GPS and LiDAR systems make this one of the easiest RC helicopters to fly in its class—perfect for pilots transitioning from drones into collective-pitch helicopters while still offering enough performance to keep experienced flyers entertained.

Read more less

Keep your heli tight and responsive with the GooSky S1 Double Linkage Set. Designed as a direct replacement for the GooSky S1, these linkages ensure accurate control input and smooth flight performance. Whether you're freshening up your setup or replacing worn components after hard flying, this set keeps your S1 dialed in and ready for the next pack. ✅ Features Direct replacement for GooSky S1 Maintains precise control geometry Durable construction for reliable performance Ideal spare part for maintenance or rebuilds 📦 Includes (6) S1 Double Linkages 🔧 Compatibility GooSky S1 Helicopter Smart to keep extras in your parts bin so you’re never grounded. 🚁    

Read more less

Keep your heli dialed in and ready to fly with the GooSky S2 Servo Arm Set. This replacement set is designed specifically for the GooSky S2 helicopter, ensuring precise fitment and reliable control performance. Whether you're rebuilding after a hard 3D session or just stocking up on spares, this pack gives you plenty of replacements to keep your setup tight and responsive. ✅ Features Direct replacement for GooSky S2 Precision fit for proper linkage geometry Durable construction for reliable performance Ideal spare part for maintenance or rebuilds 📦 Includes (10) Servo Arms 🔧 Compatibility GooSky S2 Helicopter Perfect to keep in your parts box so you’re never grounded. 🚁

Read more less

HackFab Losi Mini-B Bolt-On Sprint Car Cage (Black) – HFB02046BK Convert your Losi Mini-B into a full-fledged sprint car with the HackFab Bolt-On Sprint Car Cage. Designed for easy installation, this cage bolts directly to your stock aluminum chassis and pairs perfectly with the HackFab Sprint Car Lexan Body Kit (HFB02045 – sold separately). Featuring a unique hinge system for quick access and durable 3D-printed mounts, this kit is built for racers who want authentic style and easy maintenance. Features: Direct bolt-on fit for Losi Mini-B aluminum chassis Designed to work with HackFab Sprint Car Lexan Body (HFB02045) Innovative hinge system for quick access to internals Includes durable 3D printed mounts Includes: (1) Sprint Car Cage Kit (1) 1" Body Post All necessary mounting hardware

Read more less

HackFab Losi Mini-B Bolt-On Sprint Car Lexan Body Kit (Clear) – HFB02046BK Upgrade your Losi Mini-B into a dirt oval contender with the HackFab Sprint Car Lexan Body Kit. This pre-trimmed, clear Lexan body is designed to bolt directly onto the HackFab Sprint Car Cage (HFB02046BK - sold separately), eliminating the hassle of custom cutting and bending. It's lightweight, high-quality, and ready for your custom paint job! Features: Designed specifically for Losi Mini-B with HackFab Sprint Car cage High-quality clear Lexan Pre-trimmed, bent, and ready to assemble Includes lightweight composite mounting hardware Includes: (1) Clear Lexan body (pre-trimmed and bent) Mounting hardware Notes: Headers (HFB02044M) not included Painted body shown for reference only – yours will arrive clear and unpainted

Read more less

 ⚙️ Stay Organized. Protect Your Gears. Race Ready. Keep your pinion collection organized and easily accessible with the HackFab Mini Carbon Fiber Pinion Caddy. Designed specifically for 2mm bore pinion gears commonly used on the Losi Mini-B and Mini-T platforms, this lightweight carbon fiber caddy is the perfect addition to any pit box or race bag. Whether you're tuning gearing for different track conditions or simply keeping spare pinions organized, this caddy helps prevent lost parts and keeps your setup professional and race-ready. ⚡ Features: ⚙️ Designed for 2mm bore pinion gears🏁 Perfect for Losi Mini-B and Mini-T applications💪 Lightweight and durable carbon fiber construction🔧 Organizes and stores multiple pinion gears neatly🧰 Great for pit boxes, race bags, and workbenches🚀 Helps simplify gearing changes at the track✨ Professional appearance with premium carbon fiber finish 📦 Includes: (1) HackFab Mini Carbon Fiber Pinion Caddy 📏 Specifications: Part Number: HFB03010Material: Carbon FiberPinion Bore Compatibility: 2mm 🔧 Compatibility: Losi Mini-BLosi Mini-TMost 2mm bore pinion gears 💡 Pro Tip: Track conditions change throughout race day. Keeping multiple pinion sizes organized in a dedicated caddy makes gearing adjustments faster and helps prevent losing those tiny pinions in your toolbox or pit area. 🏁🔧

Read more less

 🏁 Purpose-Built Oval Performance for Your Mini Platform. Transform your Losi Mini-T 2.0 or Mini-B into a true Mini Late Model oval machine with the HackFab PRO Mini Late Model Oval Chassis Conversion Kit. Designed specifically for competitive oval racing, this precision CNC-machined carbon fiber chassis delivers improved stability, race-tuned weight distribution, and the scale appearance serious oval racers are looking for. With an extended wheelbase inspired by real Mini Late Models, left-side weight bias for oval handling, and integrated mounting solutions, this conversion kit creates a planted, predictable race car ready for carpet or clay oval action. ⚡ Features: 🏁 Converts the Losi Mini-T 2.0 or Mini-B into a Mini Late Model oval racer⚙️ Precision CNC-machined carbon fiber chassis construction🧭 Left-offset chassis design improves oval cornering balance🔧 Extended wheelbase for improved stability and realistic proportions💪 Carbon fiber front bumper and integrated nerf bar system🔋 Adjustable aluminum battery brackets for chassis tuning🏎️ Carbon rear body mount for lightweight durability🔄 Backwards compatible with previous V2 kits 📦 Includes: (1) PRO Mini Late Model Oval Chassis Conversion Kit 🔧 Compatibility: Losi Mini-BLosi Mini-T 2.0 💡 Pro Tip: Left-side weight bias is a huge advantage in oval racing—it helps the car stay planted in the corners and improves consistency during long mains on high-bite surfaces.

Read more less

Wake up your micro crawler with true 3S power. The HobbyPlus 3S 360mAh 20C LiPo is designed for the CR18P PRO Juice Up Edition, delivering stronger throttle response and increased wheel speed in a compact, lightweight package. Perfect for tight chassis applications where space is limited but performance matters. ⚡ Compact 3S Performance This 3S pack provides higher voltage punch while maintaining a small footprint for micro rigs. Compact size for tight installs 11.1V (3S) output 20C discharge capability Ideal for CR18P PRO and other compatible builds 🔌 Connector Details Battery Connector: JST-MCX (JST-DS style) Balance Lead: XH Be sure your ESC and charger are compatible before installation. 📦 Includes (1) 3S 11.1V 360mAh 20C LiPo Battery 📊 Specifications Nominal Voltage: 11.1V (3S) Capacity: 360mAh Maximum Charge Rate: 1C (0.35A recommended) Peak Discharge Rate: 20C Cell Configuration: 3S1P Watt Hours: 3.885Wh ROAR Approved: No ⚠️ LiPo Safety Reminder Always balance charge Never leave unattended while charging Use a LiPo-safe bag Do not over-discharge (minimum 3.2V per cell) Allow battery to cool before recharging If you're looking to unlock more power from your CR18P PRO while keeping things lightweight and compact, this 3S pack delivers.  

Read more less

Upgrade your drivetrain strength and eliminate flex with the HobbyPlus Steel U-Joint Drive Shaft Set for the CR-18. Designed as a direct replacement for the stock plastic shafts, this heavy-duty steel set delivers improved durability and smoother power transfer when crawling gets technical. If you’re running brushless or pushing your CR-18 hard on the rocks, this is a smart reliability upgrade. 🔧 Performance Upgrade These slider-style steel driveshafts: Increase drivetrain strength Reduce flex under load Improve power transfer efficiency Handle higher torque setups Built from durable machined steel, they’re designed to withstand demanding crawling conditions. 💪 Features Heavy-duty steel construction U-joint design for smooth articulation Slider-style shafts Direct bolt-on replacement Stronger and more durable than stock plastic shafts 📦 Includes (1) Front/Center Driveshaft (1) Rear/Center Driveshaft Installation Hardware 🔧 Compatibility HobbyPlus CR-18 If you’re tired of twisting stock shafts or want added confidence on tough climbs, this steel U-joint set is a solid upgrade.    

Read more less

The HobbyPlus CR-18P ARKTOS 6×6 V1.5 takes the proven CR-18P platform and adds serious capability with a true 6-wheel-drive layout, flatbed design, and upgraded electronics. This V1.5 version introduces a new ESC that supports plug-and-play brushless upgrades, letting you future-proof your rig while keeping full functionality of the winch, lights, and 2-speed transmission. Built for technical crawling and scale realism, the ARKTOS 6×6 delivers confident climbing performance, durable metal components, and a fully loaded RTR package—just charge the battery and hit the rocks. 🔧 What’s New in V1.5 Updated ESC with brushless compatibilityDrop in a brushless motor without replacing electronics Retains full control of winch, LEDs, and 2-speed transmission Improved reliability and smoother power delivery 🪨 Performance & Capability True 6WD shaft-driven drivetrain for maximum traction High-torque 280 brushed motor Full-metal gear 2-speed transmission Portal axles for improved ground clearance Oil-filled shocks for stable crawling and articulation 🚚 Scale Realism & Details ABS molded hard body with secure locking system Functional nylon flatbed Working winch with steel hook Complete LED lighting system with multiple modes Beadlock wheels with soft rubber crawler tires 📡 Electronics & Control FlySky 6-channel full-size transmitter Water-resistant ESC/receiver combo Remote-controlled high/low gear shifting Independent control for lights and winch ✅ Ready-to-Run Includes Fully assembled CR-18P ARKTOS 6×6 V1.5 FlySky 6-channel transmitter 7.4V LiPo battery USB charger Installed electronics, winch, and lighting system 🎨 Available Colors Green (HBP1810602) Tan (HBP1810601) ⚙️ Scale / Type Scale: 1/18 Drive: 6WD Vehicle Type: RTR Rock Crawler / Flatbed

Read more less

The HobbyPlus CR-18P Terranaut 8×8 is a mission-ready recovery and hauling rig built on one of the most capable micro crawler platforms ever made. With Active All-Wheel Steering, a remote-operated 2-speed transmission, portal axles, and a fully functional recovery winch, this 1/18 utility crawler delivers an unmatched mix of realism, capability, and control. Whether you're navigating technical rock sections, hauling scale trailers, performing recovery missions, or just trail-running with friends, the Terranaut does it all — with style and precision. Key Features Active All-Wheel Steering (Active-AWS)Fully proportional front + rear steering with independent control. Perform: Tight U-turns Crab walking Front-only or rear-only steering Full coordinated or counter-steer modes 2-Speed Transmission (Remote Operated) Low Gear (124:1): Maximum torque for crawling, recovery, and technical driving High Gear (31:1): Trail-speed cruising Functional Recovery WinchStainless steel cable + metal hookRemote-controlled operation for real recovery missions Extreme Scale HardbodyInjection-molded body, interior details, dual spares, accessories, and tilt-cab for instant battery access Remote-Controlled LED Lighting5 lighting modes + high-visibility rotating amber beacons Gooseneck / Fifth-Wheel Trailer HitchReady for hauling and towing Full-Metal Gear DrivetrainUpgraded for durability and long-term reliability Portal AxlesIncreased ground clearance and tunable ratios Aluminum ChassisBlack-anodized rails with chamfered edges + laser-etched HB logo High-Quality SuspensionBig-bore oil-filled shocks with threaded bodies Performance Steering SystemServo-on-axle steeringMetal-gear servos on all four axlesCVDs for strength and increased steering angle Electronics & Radio System FlySky 6-channel transmitter Proportional rear-steer thumb lever Smooth FlySky ESC/receiver combo Big-block 280-size brushed motor Water-resistant electronics Battery & ChargingIncludes 2S 7.4V 1100mAh LiPoRuntime: up to 1 hourUSB charger included Why the Terranaut 8×8 Stands Out The Terranaut isn’t just another crawler — it's a purpose-built multi-utility machine. With eight driven wheels, eight independently steerable wheels, a functional winch, scale towing capability, and a full hardbody, it delivers a level of realism and versatility rarely seen in the micro-scale category. From recovery missions to scale adventures, the Terranaut 8×8 offers absolute control, incredible torque, and head-turning detail. Includes (1) HobbyPlus CR-18P Terranaut 8×8 RTR (1) FlySky 6-channel radio system (1) 2S 7.4V 1100mAh LiPo battery (1) USB charger Preinstalled winch, LEDs, and electronics Needed to Complete Nothing — Ready to Run    

Read more less

Take your CR18P to the next level with a true Servo-On-Axle (SOA) setup. This CNC-machined aluminum conversion eliminates flex, improves steering precision, and adds low-mounted weight where it matters most for crawling performance. More control. More strength. More capability. 🏁 Why Go SOA? Moving the servo onto the axle improves steering response and geometry while reducing slop and flex found in chassis-mounted setups. Combined with the added aluminum strength, this upgrade transforms how your CR18P handles technical terrain. 🛠 Design & Construction Precision CNC-machined from high-quality aluminum, this front portal axle upgrade: Eliminates unwanted flex from stock composite components Adds unsprung weight down low for improved traction Increases structural integrity of the drivetrain Enhances steering precision and consistency The anodized finish adds both durability and clean visual appeal — performance with style. 💪 Performance Benefits CNC-machined aluminum construction Eliminates steering flex Improves stability on climbs Increases traction over obstacles Boosts control in technical terrain Adds eye-catching upgrade “bling” 📦 Includes (1) Aluminum Servo Mount (2) Aluminum Steering Links (2) Composite Upper Suspension Links (2) Pivot Balls (2) Zip-Ties Mounting Hardware 🔧 Compatibility HobbyPlus CR-18 If you're serious about tightening up your steering and improving crawling stability, this SOA conversion is one of the most impactful upgrades you can make to your CR18P.    

Read more less

Upgrade durability. Add low-end stability. Crawl harder. This HobbyPlus Aluminum Steering Knuckles & Brass Portal Covers Set is a serious performance upgrade for your CR18P platform. Designed to improve strength and lower the center of gravity, this combo increases front-end bite while reinforcing key components. 🏁 Performance & Durability Upgrade The factory composite components get the job done — but this set takes things to the next level. 🔩 CNC-Machined Aluminum Steering Knuckles Precise fitment Increased durability over stock Improved steering consistency Better impact resistance 🥇 Solid Brass Portal Covers Adds 24g total unsprung weight Lowers center of gravity Improves front traction on climbs Increases stability over obstacles The added weight down low dramatically improves crawling performance, especially on technical terrain and steep ascents. ✅ Features CNC-machined construction for precision Brass portal covers for improved stability 24g added unsprung weight Increased durability vs. stock composite parts Direct bolt-on upgrade 📦 Includes (2) Brass Front Portal Covers (2) Aluminum Steering Knuckles 🔧 Compatibility HobbyPlus CR-18 HobbyPlus Arktos 6x6 If you're looking to plant the front end, improve climbing confidence, and strengthen your rig at the same time — this is a must-have upgrade.  

Read more less

Strengthen your drivetrain and keep your crawler running smooth with the HobbyPlus CR18P Evo Metal Transmission Gears. Designed as a direct replacement for the CR18P Evo platform, this gear set improves durability and long-term reliability over stock components. Perfect for brushless upgrades or aggressive trail driving, these metal gears help ensure consistent power transfer when the terrain gets technical. 🔧 Features Direct replacement for CR18P Evo Metal construction for improved durability Handles increased torque and load Enhances drivetrain reliability Ideal for high-performance crawling setups 📦 Includes (1) Complete Transmission Gears Set 🔧 Compatibility HobbyPlus CR-18 If you're pushing your CR18P harder than stock, upgrading to metal transmission gears is a smart move for long-term performance and dependability.  

Read more less

  The Hobbywing 1/10 ESC Switch is a direct replacement for a wide range of Hobbywing electronic speed controls that use a slider-style on/off switch. If your original switch becomes worn, damaged, or unreliable, this replacement restores proper operation with a factory-fit feel. Compatible with popular ESCs such as the Justock, XeRun 120A V2.1, QuicRun 10BL60-Sensored, and other Hobbywing 1/10 ESCs using this same switch format. Features Genuine Hobbywing replacement part Restores reliable on/off control Slider-style switch for smooth operation Compatible with multiple Hobbywing 1/10 ESC models Easy plug-in installation Compatibility Justock ESC XeRun 120A V2.1 QuicRun 10BL60-Sensored Other Hobbywing 1/10 ESCs equipped with a slider switch

Read more less

The Hobbywing Electronic Power Switch Fusion (EPS) replaces traditional mechanical on/off switches with a highly reliable, vibration-proof, electronically controlled power switch. By eliminating moving contacts, this switch prevents issues caused by oxidation, dust, moisture, or mechanical wear — delivering a more dependable solution for high-performance RC vehicles. Designed for seamless integration with Hobbywing Fusion systems, it’s a simple and effective upgrade that improves long-term durability and consistent power delivery. Features Electronic ON/OFF switching for increased reliability No mechanical contacts — eliminates issues from vibration or oxidation Compact and lightweight design Simple plug-and-play installation Ideal for crawling, trail rigs, and Fusion-equipped vehicles Compatible With Hobbywing Fusion SE Hobbywing Fusion Pro Hobbywing Fusion Elite

Read more less

The Hobbywing Electronic Power Switch for Justock ESCs replaces traditional mechanical switches with a reliable, electronically controlled solution. By removing moving contacts, this EPS unit prevents failures caused by vibration, dust, oxidation, or wear — making it a more dependable option for spec racing, club racing, and general use. Designed specifically for Hobbywing Justock systems, it provides clean, consistent ON/OFF control with simple installation. Features Electronic ON/OFF switching for improved durability Eliminates issues caused by vibration or oxidized mechanical contacts Compact, lightweight, and easy to install Ideal for Justock-based 1/10 racing platforms Compatible With XeRun Justock G3 XeRun Justock G3S

Read more less

🔥 Smaller Package. Big-Time Performance.The Hobbywing EZRun MAX10 G2 80A ESC is the perfect blend of power, precision, and protection for 1/10 on-road cars, buggies, lightweight SCTs, and trucks. Built with smart sensored brushless tech, this ESC delivers buttery smooth throttle response and a huge performance boost—up to 25% more speed when paired with the Hobbywing 3652 G3 motor! 🧠 Packed with Features: 80A continuous / 520A burst current IP64-rated waterproofing Supports turbo timing up to 32° Smart fan control (fan runs only when needed) 74% more capacitor capacity than previous MAX10 Overheat protection & smart freewheeling for efficiency Real-time data monitoring and data logging (with optional OTA module) 📏 Specifications: Battery Input: 2S–3S LiPo BEC: 6V/7.4V @ 5A (Switch-mode) Motor Limit: 2S: <6000Kv 3S: <4200Kv (3652 size motor) Dimensions: 53 x 39.5 x 37.2mm Weight: 120g (w/ wires) Application: 1/10 On-Road, Buggy, Light SCT, Monster Truck Cooling Fan: Included, BEC powered 📦 Includes: (1) EZRun MAX10 G2 80A ESC Hobbywing Decal User Manual ⚙️ Need control and cool temps on your 2S/3S setup?The MAX10 G2 80A delivers elite performance with smart tech to back it. Race harder, run cooler, and go faster—without compromise.

Read more less

Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo – 1/4 & 1/5 Scale Powerhouse! 🔥 The Ultimate High-Voltage Brushless Combo for Large-Scale RCs! 🚗💨 Take your 1/4 and 1/5 scale RC vehicles to the next level with the Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo! Designed for heavy-duty off-road trucks, truggies, and monster vehicles, this high-voltage system delivers incredible torque, extreme power, and cutting-edge protection features to handle even the most demanding terrains. 🏆 Whether you're tearing through sand, snow, mud, or rocky terrain, this sensorless brushless system provides smooth acceleration, consistent power delivery, and extreme durability for the world’s largest RC vehicles! ✨ Key Features: ⚡ Extreme 300A Continuous / 2000A Peak Current – Unleashes massive power for large-scale vehicles 🔋 6-12S LiPo Compatibility – Supports high-voltage setups for extreme performance 🔥 70125 560KV Four-Pole Brushless Motor – Delivers incredible torque and top speed 🛠️ Waterproof & Dustproof Design – Handles mud, snow, and extreme weather conditions 💨 Built-in Fireproof Circuitry – Prevents electrical damage and enhances safety 📊 Real-Time Data Logging – Monitor performance using the HW LINK app (OTA Bluetooth module required) 🔩 Ultra-Powerful Switch Mode BEC (10A Continuous, 25A Burst) – Adjustable 6V/7.4V/8.4V output 🚀 Advanced Protection Features – Includes low-voltage cutoff, thermal safeguards, signal loss, and current protection 📦 What’s in the Box? (1) Hobbywing EZRUN MAX4 ESC (1) Hobbywing EZRUN 70125 560KV Brushless Motor (1) Double-Sided Tape (2) Heat Shrink Tubes (1) User Manual 📖 (1) Hobbywing Decal Sheet 📊 Motor Specifications – Hobbywing EZRUN 70125 560KV Part Number: 30402850 Poles: 4 KV Rating: 560KV No-Load Current: 3.6A Resistance: 0.0050Ω Motor Dimensions: 70mm (2.76") x 125mm (4.92") Shaft Diameter & Length: 8mm (0.315") x 30mm (1.181") Weight: 1995g LiPo Compatibility: 8-12S LiPo Recommended ESC: Hobbywing MAX4 HV ⚡ ESC Specifications – Hobbywing EZRUN MAX4 Scale Compatibility: 1/4 & 1/5 Heavy-Duty Off-Road, Truck, Monster Continuous/Peak Current: 300A / 2000A Motor Compatibility: Sensored & Sensorless Brushless Motors Input Voltage: 6-12S LiPo Motor Limit (12S LiPo): ≤600KV (70125 Size Motor) BEC Output: Adjustable 6V / 7.4V / 8.4V, 10A Continuous, 25A Burst Waterproof: Yes Switch Type: Electronic Capacitor Protection: Yes Size (L x W x H): 125mm x 85mm x 61.7mm Weight: 775.4g 📌 Tech Note: Supports LED Program Card, LCD Program Box, and OTA Programmer (optional) for ESC parameter tuning. 🏁 Conquer Any Terrain with Unmatched Power! 🔥 Built for the biggest and most powerful RC vehicles, the Hobbywing EZRUN MAX4 ESC & 70125 560KV Motor Combo delivers unrivaled durability, extreme torque, and high-speed performance for off-road monsters, truggies, and heavy-duty RC trucks. 💨 Upgrade now and experience the world’s most powerful RC system! 🏆🏁

Read more less

The Hobbywing EZRun MINI28 Sensored Brushless ESC delivers next-level control and tuning in a tiny footprint — purpose-built for competitive 1/28-scale racing. Don’t let the size fool you… this ESC is absolutely loaded with features normally seen only on full-size race systems. At just 22.7 × 14.2 × 11.8mm, it fits cleanly into nearly any Mini-Z–style chassis, while the integrated aluminum heat sink keeps temps under control during hard runs. With 26 adjustable parameters, a high-voltage BEC, and OTA wireless programming (via optional module), the MINI28 gives racers every tuning edge possible. Key Features Designed specifically for 1/28-scale racing performance Ultra-compact and lightweight for tight chassis layouts Large integrated aluminum heat sink for temperature control High-voltage adjustable BEC (6V or 7.4V, 3.5A peak) Compatible with sensored and sensorless brushless motors Dual-mode App support (requires optional Hobbywing OTA module) Packed with 26 adjustable ESC tuning parameters Ideal for Mini-Z, GL Racing, PN, and other 1/28 platforms Specifications Continuous / Peak Current: 30A / 80A Motor Type: Sensored or Sensorless Brushless Motor Limit: 1626 size motors Battery: 2S LiPo BEC Output: 6V / 7.4V adjustable, 3.5A peak Dimensions: 22.7 × 14.2 × 11.8mm Weight: 5g (without wires) Programming: Via throttle cable or OTA module (sold separately) Includes (1) Hobbywing EZRun MINI28 Sensored Brushless ESC (1) ESC Manual Wiring harnesses

Read more less

Unlock next-level speed and precision for your 1/28th-scale racer. The Hobbywing EZRun MINI28 Sensored Brushless Combo delivers an insane amount of performance in an ultra-compact package — combining a feature-rich ESC with a powerful, smooth 1626 sensored brushless motor. Designed specifically for competitive Mini-Z-style 1/28 racing, this combo gives you the control, adjustability, and efficiency needed to dominate tight layouts and technical tracks. About the EZRun MINI28 System Micro Size, Monster Performance The MINI28 ESC is tiny — just 22.7×14.2×11.8mm — but packed with advanced tuning options, including 26 adjustable parameters, a high-voltage adjustable BEC, and full compatibility with the Hobbywing OTA Module (sold separately) for smartphone programming. The included 1626 3500Kv sensored brushless motor delivers zero-cogging startup, crisp low-speed control, and big power up top. When paired with the MINI28 ESC, timing boost can drastically increase RPM for max straight-line speed. ESC Features Built specifically for 1/28 scale racing Ultra-compact and lightweight — fits almost any chassis Integrated aluminum heat sink for consistent temps Dual-mode app support (with optional OTA module) Sensored & sensorless brushless compatibility Adjustable high-voltage BEC (6V / 7.4V, 3.5A peak) ESC Specifications Continuous / Peak Current: 30A / 80A LiPo: 2S BEC: 6V/7.4V adjustable (3.5A peak) Size: 22.7×14.2×11.8mm Weight: 5g Motor Limit: 1626 size Motor Features (1626 – 3500Kv) Zero-cogging, ultra-smooth startup Excellent efficiency & cool operation Precision response and consistent torque Modular design for easy cleaning & maintenance Massive top-speed gains when using ESC timing Motor Specifications kV: 3500 Poles: 2 Input Voltage: 2S Diameter: 16mm Length: 26mm Shaft: 1.8mm x 8.5mm Weight: 18g Includes (1) EZRun MINI28 Sensored Brushless ESC (1) EZRun 1626 Sensored Brushless Motor (3500Kv) Wiring harnesses ESC Manual  

Read more less

Compatible with: XR10 PRO G2S Stealth / Max10 80A Keep your ESC cool under race heat with the Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan. Designed specifically for the XR10 PRO G2S Stealth and Max10 80A ESCs, this precision fan delivers high-RPM airflow with a frameless, low-drag design that maximizes efficiency and reduces noise. The G25’s compact profile fits tight racing setups while maintaining optimal heat management to protect critical electronics lap after lap. ⚡ Features: ✅ OEM replacement for Hobbywing XR10 PRO G2S Stealth and Max10 80A ESCs 🌪️ Frameless Cyclone Design provides superior airflow with minimal resistance 🔋 6 V operation for smooth, reliable cooling performance ⚙️ High-RPM brushless motor keeps ESC temperatures stable under load 💪 Compact 25×25×10 mm size for tight installations and low weight 🧠 Smart voltage guidance ensures proper pairing with your power system 📊 Specifications: Model: G25 Stealth 2510BH-6V Input Voltage: 6 V Size: 25 × 25 × 10 mm Design: Frameless Cyclone Recommended ESCs: Hobbywing XR10 PRO G2S Stealth, Max10 80A Weight: ≈ 10 g ⚙️ Voltage Selection Notes: 4–6 cell NiMH / 2S LiPo: Use included 5 V fan 7–9 cell NiMH / 3S LiPo: Use 12 V fan or power 5 V fan from receiver (+6 V) 10–12 cell NiMH / 4S LiPo: Use 12 V fan and external UBEC to power receiver 📦 Includes: (1) Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan 💡 Pro Tip:For the longest fan life, keep debris out of the blades and avoid running the fan when submerged or coated in tire compound dust — a quick blast of compressed air between runs keeps performance consistent.  

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

  📱 Wireless Tuning. Total Control.Ditch the cords and take full control of your ESC with the Hobbywing OTA Programmer. Designed to work with select Xerun, EzRun, Platinum, and Seaking ESCs, this compact module connects wirelessly to your smartphone using the HW Link App—giving you the power to fine-tune ESC settings, record real-time data, and even update firmware on the go. 🎯 Key Features: Real-time wireless tuning via the HW Link App Graphical interface with drop-downs and sliders for easy setup Built-in data logging and memory storage Seamless Bluetooth transmission One-touch factory reset Compact, lightweight design 📐 Specifications: Voltage: 5–12.6V Bluetooth Version: ≤ 4.0 Range: 0–3m (open field) Size: 30.0 x 25.5 x 8.5mm Weight: 10.2g 💡 Note: Compatible only with supported ESCs. Please check your ESC manual for compatibility. Download the HW Link V2 App for optimal performance. 🎮 Your ESC. Your Way.Whether you're dialing in race settings or checking temps after a bash session, this OTA module makes managing your ESC easier, faster, and smarter.

Read more less

The Hobbywing XR10 Pro 1S Stock Spec is built for elite 1/12 and 1/10 stock-class racing, delivering ultra-smooth control in a compact, lightweight package. At just 31.6×25.8×16.2mm and 20% smaller than the standard XR10 Pro 1S, this ESC gives you more room and better weight balance options inside tight pan-car chassis layouts. Despite its size, it packs serious performance with advanced tuning, data logging, and a boosted internal BEC capable of running high-demand servos without an extra battery. Features Designed specifically for 1S stock-class racing Ultra-compact size (20% smaller than standard XR10 Pro 1S) Lightweight at 23.5g (w/o wires) for better chassis balance Built-in boost BEC: 6A output, adjustable 6V–7.4V Five preset racing profiles included Adjustable throttle & brake PWM frequencies for precision control Fully sensored ESC for smooth and consistent throttle feel Wireless programming via optional Hobbywing WiFi Express module Built-in electronic switch with 50,000+ cycle lifespan Data logging for motor temps, ESC temps, RPM, and more Firmware upgrade support Specifications Continuous / Peak Current: 80A / 380A Input Voltage: 1S LiPo or 3–4 cell NiMH BEC Output: 6V/7.4V @ 3A Wires: Black 14AWG, 200mm Connectors: None included Programming: LCD Program Box or WiFi Module Dimensions: 31.6 × 25.8 × 16.2 mm Weight: 23.5g (without wires) Applications: 1/12 & 1/10 on-road stock-class, 1S setups Motor Limit: ≥10.5T, 3650-size Why Racers Choose It If you’re running 1S pan cars and want elite throttle precision, small footprint, reliable cooling, and full data-logging capability, the XR10 Pro 1S Stock Spec is one of the strongest options in high-level racing.

Read more less

The Hobbywing Xerun XR8 Plus G2S is a next-generation 1/8-scale competition ESC built for elite on-road, off-road, and truggy racing. Designed to outperform at the highest levels, the G2S delivers massive power, extreme tuning flexibility, and advanced protection systems for serious racers pushing the limits. With support for up to 48° of boost and turbo timing, the XR8 Plus G2S unlocks exceptional top-end speed and acceleration. When paired with optional Hobbywing 4268 or 4274 G3 motors, racers can see up to a 50% increase in maximum speed, making this ESC a true weapon on high-speed tracks. Race-Proven Power & Cooling A highly efficient heat dissipation system combined with a durable frameless cooling fan keeps temperatures under control during long mains. Advanced capacitor thermal protection and real-time data monitoring help protect your electronics when running aggressive setups. Advanced Tuning & Data Control The XR8 Plus G2S offers multiple programmable parameters, an RPM speed limit function, and real-time data recording, allowing racers to precisely tailor power delivery and analyze performance. Programming is simple using the onboard SET button, LCD Program Box, or OTA Programmer. Built for Reliability Internal reverse polarity protection, a powerful switch-mode BEC, dust-resistant design, and ultra-soft 11AWG silicone wires ensure consistent performance even under extreme race conditions. Features Supports up to 48° boost & turbo timing Efficient heat dissipation with lower temperature rise Durable frameless cooling fan Internal reverse polarity protection Real-time data recording RPM speed limit function Multiple programmable parameters Capacitor thermal protection High-output adjustable BEC Excellent dustproof performance Ultra-soft 11AWG silicone wire Customized solder tabs for easy installation Specifications ESC Scale: 1/8 Waterproof: No Continuous / Peak Current: 200A / 1080A Input Voltage: 2–6S LiPo BEC Output: 6–8.4V Adjustable BEC Current: 6A Continuous / 15A Peak (Switch-Mode) Programming: SET Button / LCD Program Box / OTA Programmer Firmware Upgrade: Supported Dimensions: 56.1 × 42.1 × 38.5mm Weight: 122g (with wires) Applications: SL & SD Brushless Motors Vehicle Types: 1/8 On-Road, Off-Road, Truggy Racing Recommended Motor Pairings 4S LiPo: 4268 / 4274 ≤ 3000KV 6S LiPo: 4274 ≤ 2400KV Cooling Fan Size: 30 × 30 × 10mm Voltage Range: 5–8.4V Important Note Use factory or team-recommended settings and always monitor operating temperatures. Improper setup may cause damage to the ESC or motor.

Read more less

Dominate the track with the Hobbywing XeRun XR8 Pro G3 ESC & 3652SD Motor Combo. Designed for serious racing performance, this advanced electronics bundle delivers incredible power, precision tuning, and durability for 1/10 Short Course trucks and select 1/8 race applications. With cutting-edge smart technologies, customizable tuning options, and industry-leading reliability, the XR8 Pro G3 system gives racers the performance and control needed to stay ahead of the competition. ⚡ Advanced Smart Technology The XR8 Pro G3 introduces Smart Freewheeling technology, improving drive efficiency while reducing ESC temperatures by up to 59°F compared to previous generations. With Boost and Turbo Timing up to 48°, racers can unlock up to 50% more performance when paired with Hobbywing G3 motors. A unique dual brake system with disc brake simulation provides extremely smooth, linear braking—similar to real vehicle braking systems—for superior control during corner entry. 🎛 Fully Adjustable Performance The ESC includes 32 adjustable parameters, allowing racers to fine-tune everything from throttle response to timing. Three built-in racing profiles make setup fast and easy: Zero Timing / Blinky Mode Off-Road Racing Mode On-Road Racing Mode Programming can be done using: LCD Program Box Pro OTA Programmer HW LINK mobile app Firmware updates and data logging are also supported. 🛡 Durability & Protection Built for demanding racing environments, the XR8 Pro G3 includes multiple protection systems: Reverse polarity protection Capacitor thermal protection IP5X dust resistance Intelligent frameless cooling fan Ultra-soft 11AWG silicone wiring These features ensure reliable performance even under intense racing conditions. 🏁 Features Smart Freewheeling technology for improved efficiency Up to 48° Boost and Turbo timing adjustment Dual brake system with disc brake control 32 adjustable parameters for advanced tuning Three preconfigured racing profiles Reverse polarity protection Capacitor thermal overload protection IP5X dustproof rating Intelligent frameless cooling fan Firmware updates and data logging via HW LINK 📦 Includes (1) XR8 Pro G3 Sensored Brushless ESC (1) 3652SD Sensored Brushless Motor (4500kV) Product Manual 📊 ESC Specifications Input Voltage: 2-4S LiPo Continuous Current: 200A Peak Current: 1080A BEC Voltage: 6V – 7.4V BEC Current: 6A Continuous Dimensions: 54.8 × 36.8 × 38.8mm Weight: 102.8g 📊 Motor Specifications Motor Type: Sensored Brushless kV Rating: 4500kV Poles: 4 Input Voltage: 2S LiPo Diameter: 36.6mm Length: 53mm Weight: 189g Built for racers who demand maximum power, precise tuning, and race-proven durability, the XR8 Pro G3 combo is a serious upgrade for competitive SCT racing.  

Read more less