Chassis Plate Overview:This is a replacement lower chassis plate designed for the Traxxas Bandit and Rustler 2WD platforms. It provides the main structural foundation of the vehicle, maintaining proper alignment and durability. 🔧 Key Features ✔ Replacement lower chassis plate✔ Durable construction✔ Maintains proper vehicle alignment✔ Direct fit design 📦 Includes (1) Lower Chassis Plate 📊 Specifications Battery Compartment Length: 166mm 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Ideal for replacing a damaged chassis, this plate helps restore strength, alignment, and overall performance.    

Read more less

ESC Plate Overview:This is a replacement long chassis mounting ESC plate designed for select Traxxas 2WD platforms. It provides a secure mounting location for your ESC and helps maintain a clean electronics layout. 🔧 Key Features ✔ Replacement ESC mounting plate✔ Long chassis design✔ Secures ESC in place✔ Maintains clean electronics layout✔ Direct fit design 📦 Includes (1) Long Chassis Mounting ESC Plate 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Traxxas Stampede 2WD Ideal for replacing worn or damaged components, this plate helps keep your electronics mounted securely and functioning properly.  

Read more less

Protective Sheet Overview:The JConcepts RC10SC7 Pre-Cut Chassis Protective Sheets are an optional upgrade designed to protect your chassis while adding a clean, race-inspired look. Each sheet is precision cut for a perfect fit on the RC10SC7 platform. 🏁 About the Chassis Protective Sheets 🛡️ Durable Protection Made from tough, long-lasting material, these sheets help protect your chassis from wear on carpet, turf, and dirt surfaces. The design tucks into key areas to help reduce peeling during hard use. 🎨 Clean, Race-Ready Look Featuring JConcepts Speed Laboratory styling, the neutral color scheme and graphics give your truck a sharp, professional appearance. 🔧 Easy Fit & Replacement Pre-cut for a precise fit, with a multi-piece rear section that allows easier installation and replacement where wear is most common. 🔧 Key Features ✔ Pre-cut for precise RC10SC7 fit✔ Durable material for multiple surfaces✔ Helps protect chassis from wear✔ Multi-piece rear sections for easy replacement✔ JConcepts Speed Laboratory graphics✔ Clean, competition-ready appearance 📦 Includes (2) Pre-Cut Chassis Protective Sheets 🚗 Compatibility Team Associated RC10SC7 A simple upgrade that protects your chassis and keeps your truck looking clean and race-ready.  

Read more less

Seal & Hardware Overview:This is a replacement differential seal and hardware set designed for the Team Losi Racing 22X-4 platform. It helps maintain proper differential sealing and ensures reliable operation. 🔧 Key Features ✔ Replacement diff seal and hardware set✔ Helps maintain proper sealing✔ Supports smooth differential performance✔ Direct fit design 📦 Includes Differential seals Associated hardware 🚗 Compatibility Team Losi Racing 22X-4 Ideal for maintenance or rebuilds, this set helps keep your differential sealed properly and performing consistently.  

Read more less

Ring Gear Overview:This is a replacement differential ring gear designed for the Team Losi Racing 22X-4 platform. It ensures proper drivetrain function and smooth power transfer through the differential. 🔧 Key Features ✔ Replacement differential ring gear✔ Maintains smooth drivetrain operation✔ Direct fit design 📦 Includes (1) Differential Ring Gear 🚗 Compatibility Team Losi Racing 22X-4 Ideal for replacing worn or damaged components, this ring gear helps keep your drivetrain running consistently and reliably.    

Read more less

Tekin RX8 GEN3 1/8 Competition Brushless ESC (TEKTT2302) 🏁 Pro-Level Power. Proven Race Performance. The Tekin RX8 GEN3 ESC delivers serious power handling, precision control, and race-proven reliability for demanding 1/8-scale applications. Built on the trusted RX8 platform, this next-generation ESC is packed with advanced tuning features, data logging, and seamless motor compatibility for competitive drivers. 🏁 About the RX8 GEN3 ⚡ Big Power, Small Package Designed to handle extreme power setups, the RX8 GEN3 supports up to 6S LiPo while maintaining a compact footprint that fits easily in a wide range of chassis. 🎯 Precision Control With ultra-smooth throttle and braking response, plus adjustable torque control and frequency settings, this ESC gives you the ability to fine-tune performance exactly how you want it. 🔄 Dual Drive Mode Technology (D2) Tekin’s D2 system allows seamless operation between sensored and sensorless brushless motors, delivering smooth startup with the power of sensorless operation. 📱 Advanced Tuning & Data Built-in data logging and HotWire 3.0 Bluetooth compatibility allow for wireless tuning, real-time adjustments, and firmware updates—right from your device. 🔧 Key Features ✔ Handles up to 6S LiPo power✔ HD gold-plated solder posts for easy wiring✔ Adjustable torque control✔ Adjustable throttle & brake frequencies✔ High-voltage programmable BEC (6.0V / 7.4V @ 8A)✔ Ultra-smooth throttle and braking response✔ D2 Dual Drive Mode (sensored & sensorless)✔ Built-in data logging capability✔ HotWire programming & Bluetooth connectivity✔ On-board temperature indicator✔ One-touch radio calibration✔ Compact, easy-to-mount design 📊 Specifications Input Voltage: 2–6S LiPo / 4–16S NiMH-NiCD BEC Output: 6.0V / 7.4V @ 8A Max Current: 300A per phase* Burst Current: 1000A per phase* Motor Limits (Brushless): 2S: No Limit 3S: 4000kV 4S: 3500kV 5S–6S: 2200kV Dimensions: 1.5 x 2.2 x 1.4" (38 x 55.8 x 35.5mm) Weight: 2.7oz (76.5g) 🚗 Recommended Applications 1/8 4WD Buggy 1/8 4WD Truggy 1/8 4WD Monster Truck 1/8 GT / Touring 1/10 4WD Short Course Rock Crawlers (1/10 and larger) 🏁 Power you can trust. Control you can feel.  

Read more less

Servo Overview:The Traxxas Maxx High-Torque Metal Gear Servo is a powerful upgrade designed to deliver increased steering strength and precision for demanding conditions. Built with full metal gears and ball bearings, this servo is made to handle high-speed driving and tough terrain with confidence. 🔧 Key Features Full all-metal gear construction for durability Ball bearings for smooth, precise operation 23% more torque than standard 2085 servo Improved steering authority and control Includes stiffer servo saver spring Steel steering linkage included Designed for extreme driving conditions 📦 Includes (1) High-Torque Metal Gear Servo Stiffer Servo Saver Spring Steel Steering Linkage 🚗 Compatibility Traxxas Maxx platform Built for strength and precision, the 2085XL servo delivers the torque and control needed to keep your Maxx handling confidently in the most demanding situations.  

Read more less

The PN Racing KSK Compound RCP Radial Tires deliver consistent grip and smooth handling for Mini-Z racing on RCP surfaces. The radial tread pattern provides stable cornering and predictable traction, making them ideal for both competitive racing and tuning setups. Available in multiple compounds, these tires allow you to adjust traction based on track conditions. Softer compounds provide more grip, while harder compounds offer longer wear and smoother handling. 🔧 Features:• KSK compound for strong grip and long life• Radial tread pattern for stable handling• Designed for RCP track surfaces• 11mm width for Mini-Z setups• Laser marked part number inside tire• Multiple compounds for tuning performance 📦 Includes:• (2) Radial Tires ⚙️ Compound Options:• 30 Shore – Soft• 35 Shore – Medium• 40 Shore – Hard ⚙️ Specifications:• Width: 11mm• Surface: RCP• Quantity: 2 Tires    

Read more less

Maximize rear traction with the Marka V1 Rear Tires, designed for Mini-Z racing on RCP track surfaces. These slick-style rear tires provide strong forward grip and improved stability for high-traction setups. The 10° soft compound delivers maximum grip, making them ideal for low-traction tracks or when extra rear bite is needed. The 14mm width increases contact patch for improved acceleration and corner exit stability. 🔧 Features:• V1 rubber compound for RCP track performance• 10° soft compound for maximum traction• 14mm wide rear tire for increased contact patch• Smooth and predictable handling• Ideal for tuning rear grip• Designed for Mini-Z racing 📦 Includes:• (2) Rear Tires ⚙️ Specifications:• Width: 14mm• Compound: 10° Soft• Position: Rear• Surface: RCP      

Read more less

Fine-tune rear traction with the Kyosho 11mm Wide Racing Radial Tires. Designed for Mini-Z Racer series vehicles, these tires feature a directional radial tread pattern that performs well on both urethane and carpet surfaces. Left and right-specific tires provide consistent handling, while multiple compound options allow you to adjust grip for different track conditions. Softer compounds increase traction, while harder compounds reduce grip for smoother, more controlled handling. 🔧 Features:• 11mm wide radial tread design• Directional left and right tires• Works on urethane and carpet surfaces• Multiple compounds for traction tuning• Durometer rating etched inside tire• Designed for Mini-Z Racer series 📦 Includes:• (4) 11mm Racing Radial Tires ⚙️ Compound Options:• MZW38-10 - 10 Shore – Extra Soft (maximum grip)• KYOMZW38-20B - 20 Shore – Soft• KYOMZW38-30 - 30 Shore – Medium• KYOMZW38-40 - 40 Shore – Hard (reduced grip) ⚠️ Note:• Must be used with 11mm wide wheels        

Read more less

Secure your tires with confidence using the PN Racing V2 Strong Tire Tape. This high-grade double-sided tape provides a strong bond between tire and wheel, helping prevent tire slip during hard acceleration and cornering. Designed specifically for Mini-Z racing, this tape is ideal for rear wheels (11mm) and also works well for front wheel applications. The upgraded V2 material offers stronger adhesion compared to standard tapes, delivering reliable performance on high-grip tracks. 🔧 Features:• V2 high-strength double-sided tire tape• Designed for Mini-Z racing wheels• Ideal for 11mm rear wheels• Stronger adhesion than standard R246 tape• Helps prevent tire slip under load• Easy to cut and apply• Made in USA 📦 Includes:• (1) Roll V2 Strong Tire Tape ⚙️ Specifications:• Width: 9mm• Length: 15ft• Type: Double-sided tire tape  

Read more less

Keep your drivetrain running smoothly with the Team Associated 54T Idler Gear for the 3-gear gearbox. This replacement idler gear is designed for RC10B7, RC10T7, and RC10SC7 platforms, delivering reliable power transfer and consistent performance. Precision molded for proper mesh and durability, this gear is ideal for replacing worn or damaged components to maintain drivetrain efficiency and smooth operation. 🔧 Features:• Replacement 54T idler gear for 3-gear gearbox• Designed for RC10B7, RC10T7, and RC10SC7 platforms• Precision molded for smooth gear mesh• Durable construction for long-lasting performance• Ideal maintenance or replacement part 📦 Includes:• (1) 3-Gear Gearbox Idler Gear ⚙️ Specifications:• Tooth Count: 54T• Gearbox Type: 3-Gear• Position: Idler Gear Keep your drivetrain dialed in with the Team Associated 54T idler gear, built for smooth performance and dependable durability.    

Read more less

Upgrade your drivetrain durability with the Traxxas Front HD Driveshaft Assembly, designed for use with the Extreme Heavy Duty Upgrade Kit (TRA9080). Built to handle increased power and harsh driving conditions, this driveshaft delivers improved strength and long-lasting performance. This assembly features a 6mm axle design for added durability, making it ideal for high-performance setups and aggressive driving. The pre-assembled components ensure quick installation and reliable operation right out of the package. 🔧 Features:• Heavy-duty driveshaft assembly for improved durability• Designed for use with Extreme HD Upgrade Kit (TRA9080)• 6mm axle for increased strength and reliability• Pre-assembled components for easy installation• Built to handle high power and rough terrain 📦 Includes:• (1) Pre-Assembled Inner Driveshaft• (1) Pre-Assembled Outer Driveshaft• (1) Driveshaft Pin ⚙️ Specifications:• Position: Front• Axle Size: 6mm ✅ Compatibility:• Traxxas Hoss• Traxxas Rustler 4x4• Traxxas Slash 4x4• Traxxas Slash 4x4 Ultimate Built for strength and reliability, the Traxxas HD Front Driveshaft Assembly is the perfect upgrade for handling increased power and demanding driving conditions.

Read more less

Upgrade strength and protection where it matters most with the Hot Racing Aluminum Rear Differential Gear Cover. Designed for the Arrma Grom platform, this CNC-machined upgrade delivers increased durability, improved heat dissipation, and reduced flex for more consistent drivetrain performance. Constructed from high-strength 7075 aluminum, this cover helps protect the rear differential from impacts and wear while keeping temperatures under control during hard runs. The rigid design minimizes flex, improving gear alignment and overall drivetrain efficiency—especially in rough terrain and high-load conditions. 🔧 Features:• Precision CNC-machined 7075 aluminum construction• Provides maximum protection for rear differential components• Helps reduce flex for improved drivetrain performance• Enhances heat dissipation under heavy use• Durable, corrosion-resistant black finish• Easy installation for quick upgrades 📦 Includes:• (1) Aluminum Rear Differential Gear Cover ⚙️ Specifications:• Material: 7075 Aluminum• Color: Black ✅ Compatibility:• Arrma Mojave Grom Built for durability and performance, the Hot Racing rear diff cover is a must-have upgrade to protect your drivetrain and keep your Grom running strong.    

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Boof RC EC3 Female to EC2 Male Adapter The Boof RC EC3 Female to EC2 Male Adapter makes it easy to connect EC2-equipped electronics to EC3 power systems without cutting or resoldering wires. This compact adapter provides a quick and reliable solution when running mixed connector types in your RC setup. Designed for dependable conductivity and a secure fit, this adapter helps keep your wiring clean while allowing you to use batteries and electronics with different connector standards. 🔧 Features:• EC3 Female to EC2 Male power adapter• Quick solution for mixed EC2 and EC3 connector setups• Compact design for clean installations• Durable connectors for reliable power transfer• No rewiring or soldering required for simple conversions 🏁 Perfect For:• RC cars and trucks• Aircraft and boats using EC connectors• Converting EC3 battery connections to EC2 systems• Clean adapter solutions for custom builds The Boof RC EC3 to EC2 adapter is a simple and reliable way to connect different power systems while keeping your wiring setup clean and efficient.    

Read more less

Boof RC XT901 2+2 Connector Set – Male & Female The Boof RC XT901 2+2 Connector Set provides a high-performance power connection designed for demanding RC applications. Featuring the XT901 2+2 design, these connectors allow you to handle both main power and additional signal or balance connections in one clean plug system. Built for reliability and strong conductivity, these connectors are ideal for racers and builders who want a durable connection capable of handling higher current loads while keeping wiring organized. 🔧 Features:• Includes XT901 2+2 Male and XT901 2+2 Female connectors• High-current connector design for demanding setups• 2+2 configuration supports power plus additional signal connections• Durable construction for reliable performance• Ideal for custom battery and ESC wiring 🏁 Perfect For:• High-performance RC cars and trucks• Custom battery and ESC connections• Clean wiring builds• Racing and high-current power setups Upgrade your wiring setup with the Boof RC XT901 2+2 connector set, delivering strong performance and dependable power connections for serious RC builds.

Read more less

Boof RC XT60 Male to XT90 Female Power Adapter – 12AWG / 5cm Need to adapt an XT60 battery connection to an XT90 system? The Boof RC XT60 Male to XT90 Female Power Adapter provides a compact and reliable solution for connecting different power connector types without modifying your batteries or ESC. Built with heavy-duty 12AWG wire, this adapter is designed to handle high current loads while maintaining excellent conductivity and durability. The short 5cm length keeps your setup clean and compact while minimizing unnecessary wire clutter. 🔧 Features:• XT60 Male to XT90 Female power adapter• 12AWG heavy-duty wire for high current capability• Compact 5cm length for a clean installation• Durable connectors for reliable power transfer• Perfect for adapting battery and ESC connector types 🏁 Perfect For:• High-performance RC cars and trucks• Converting XT60 batteries to XT90 systems• Clean adapter setups in tight chassis layouts• Custom RC electronics builds The Boof RC XT60 to XT90 adapter makes it easy to connect mixed power systems while maintaining dependable performance and a tidy wiring setup.

Read more less

Need a clean, reliable way to extend your servo wiring? The Boof RC Male to Female Servo Extension Wires make it easy to add extra reach between your receiver and servo without compromising signal quality. Perfect for RC racers, crawlers, airplanes, boats, and custom builds where clean wiring and proper routing matter. Built with quality connectors and flexible wire, these extensions are designed for dependable performance whether you're setting up a tight race chassis or a larger-scale build that needs extra length. 🔧 Features:• Male to Female servo extension configuration• Clean and secure signal transfer• Flexible wire for easy routing inside tight chassis• Ideal for receivers, servos, ESC signal leads, and accessories• Compatible with most standard RC servo connectors 📏 Available Lengths:• 100mm• 150mm• 200mm• 300mm 🏁 Perfect For:• Clean servo wiring setups• Custom electronics layouts• Extending receiver-to-servo connections• Cars, trucks, crawlers, boats, and aircraft Whether you're tidying up your electronics or building a new rig from scratch, Boof RC servo extensions give you the extra length you need with reliable performance.      

Read more less

Celebrate a decade of one of the most iconic RC bush planes ever made with the E-flite Timber 1.5m 10th Anniversary Edition. This special edition retains the classic Timber short-nose profile and trim scheme while adding modern structural upgrades, improved electronics, and enhanced durability. Designed for STOL (Short Takeoff and Landing) capability, this aircraft excels at flying from grass fields, dirt strips, rough terrain, or even water when using the included float set. Airframe Design & Enhancements The Timber 10th Anniversary Edition features structural improvements throughout the airframe to increase durability and performance. A reinforced wing design improves stiffness and roll authority, while the bolt-on two-piece wing with composite joiner ensures secure assembly and easy transport. Functional slotted flaps and optional leading edge slats enhance low-speed handling and STOL capability. The heavy-duty shock-absorbing landing gear with oversized tundra tires allows confident takeoffs and landings on rough surfaces. Factory-installed LED landing, navigation, and strobe lights improve visibility for early morning or evening flights. Advanced Flight Technology The included Spektrum AR631+ receiver comes preloaded with a Smart Transmitter File, allowing compatible NX and iX transmitters to automatically import model settings during binding. AS3X+ stabilization smooths out wind and turbulence for a locked-in flight feel similar to larger aircraft. SAFE Select can be enabled for added stability with bank and pitch limits and automatic self-leveling, making the aircraft easier to fly in challenging conditions or for less experienced pilots. High-Performance Electronics A powerful Spektrum 3542 800kV brushless motor delivers strong thrust for STOL takeoffs, aerobatics, and everyday sport flying. The Spektrum Avian 70A Smart Lite ESC provides real-time telemetry such as voltage, current, and RPM when paired with compatible Spektrum transmitters. Six metal-gear servos ensure precise and reliable control, while integrated wing connectors simplify assembly without sacrificing electrical reliability. Features Special 10th Anniversary Edition Timber design Reinforced wing structure for improved handling Functional slotted flaps for enhanced STOL performance Optional leading edge slats for slower flight control Shock-absorbing landing gear with heavy-duty springs Oversized tundra tires for rough terrain operation Factory-installed LED landing, navigation, and strobe lights Spektrum Avian 70A Smart Lite ESC with telemetry AR631+ receiver with AS3X+ stabilization and SAFE Select Included optional floats for water flying Includes (1) Timber 1.5m 10th Anniversary Edition Aircraft (1) Spektrum 3542 Brushless Outrunner Motor (800kV) (1) Spektrum Avian 70A Smart Lite Brushless ESC (IC3 connector) (1) Spektrum AR631+ DSMX Receiver with AS3X+ and SAFE Select (6) Spektrum A332 9g Metal-Gear Servos (1) Optional Leading Edge Slats Set (1) Optional Float Set (1) Product Manual Needed to Complete 5–7+ channel Spektrum DSMX/DSM2 compatible transmitter 3S–4S 2200–5000mAh LiPo battery with EC3 or IC3 connector Compatible LiPo charger Specifications Length: 41.5 in (1054 mm) Wingspan: 59.05 in (1500 mm) Weight: 56 oz (1590 g) Power: 3–4S LiPo (11.1–14.8V) Motor: Brushless Outrunner (800kV) Material: EPO Foam Technology: AS3X+, SAFE Select, Smart telemetry Skill Level: Intermediate Assembly Level: Bind-N-Fly Basic Weight Conversion:56 oz ≈ 3.5 lbs    

Read more less

The HobbyZone AeroScout S 2 is one of the most popular RC trainer airplanes ever built, designed to make learning to fly easier, safer, and more fun. With durable EPO foam construction, a stable high-wing design, and Spektrum SAFE® technology, this aircraft helps new pilots build confidence while still offering plenty of performance for experienced flyers. Whether you're learning to fly yourself or teaching someone else, the AeroScout S 2 is a reliable and forgiving trainer that can grow with your skills. ✈️ Perfect Trainer for New Pilots The AeroScout S 2 features three selectable flight modes so you can match the aircraft’s stability to your skill level: Beginner Mode – Maximum stability and pitch/bank limits for easy learning Intermediate Mode – Allows more freedom while maintaining stabilization Experienced Mode – Full control with no limits for advanced flying SAFE technology helps prevent loss of control and can help recover the aircraft if needed. ⚙️ Durable & Beginner-Friendly Design The rear-mounted pusher propeller design keeps the prop safe during rough landings and helps prevent damage. Combined with durable EPO foam construction, the AeroScout can handle bumps and beginner mistakes better than most trainer aircraft. The tricycle landing gear with oversized tires and steerable nose wheel allows easy takeoffs and landings from grass, dirt, or pavement. 📡 Reliable Spektrum Radio System This RTF version includes the Spektrum DXS DSMX 2.4GHz transmitter, providing reliable interference-free control and compatibility with the Spektrum ecosystem. ⚡ Features Ideal trainer airplane for first-time RC pilots Durable EPO foam construction Exclusive SAFE® flight assistance technology Beginner, Intermediate, and Experienced flight modes Rear-mounted pusher propeller for durability Stable high-wing trainer design Oversized wheels for grass or rough field takeoffs Steerable nose wheel for easier ground handling Includes Spektrum DXS DSMX 2.4GHz transmitter Ready-to-Fly configuration with electronics installed 📦 Includes (1) HobbyZone AeroScout S 2 1.1m Airplane (1) Spektrum Avian 30A Brushless Smart Lite ESC (installed) (1) Brushless Outrunner Motor (installed) (4) Sub-Micro Servos (installed) (1) Spektrum AR631 Receiver (installed) (1) Spektrum DXS 2.4GHz DSMX Transmitter (1) Product Manual 🔧 Needed to Complete (1) 3S 11.1V 1300–2200mAh LiPo Battery with EC3 or IC3 connector (1) Compatible LiPo Charger 📊 Specifications Wingspan: 43.11 in (1095 mm) Length: 34.25 in (870 mm) Weight: 22.5 oz (639 g) without battery Motor: 2306 2250Kv Brushless Outrunner Power Type: Electric Completion Level: Ready-To-Fly (RTF) A fantastic airplane for beginners and instructors alike, the AeroScout S 2 offers a stable flight platform, durable design, and advanced safety features to help pilots learn and progress with confidence.  

Read more less

Car stand for 1/24th or 1/18th scale

Read more less

Gain a competitive edge with the R1WURKS Ultra-Lightweight Titanium HD CVA Bones, engineered to dramatically reduce drivetrain rotating mass for faster acceleration and improved responsiveness. Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium, these CVA bones are designed specifically for high-performance stock racing applications. Optimized for 17.5T and 21.5T classes, they help deliver sharper throttle response, smoother braking, and improved cornering agility. ⚡ Ultra-Lightweight Racing Advantage Weighing only 6.0g for the pair, these CVA bones are 38.78% lighter than standard bones, significantly reducing rotational inertia in the drivetrain. Less rotating mass allows the drivetrain to spin up and slow down faster, giving racers improved throttle control and braking response. This results in a car that feels more agile, responsive, and efficient on the track. 🏁 Improved Efficiency & Performance The reduction in drivetrain mass also improves overall efficiency, helping reduce motor load and lower motor temperatures during long runs. Combined with improved power transfer, this helps racers maintain consistent performance throughout heats and mains. ⚙️ Features Ultra-lightweight design at 6.0g per pair 38.78% lighter than standard CVA bones Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium Reduces drivetrain rotational inertia Improves acceleration and braking response Enhances cornering agility and vehicle responsiveness Improves drivetrain efficiency and power transfer Helps reduce motor temperatures Laser-etched logos and identification markings 📦 Includes (2) Titanium CVA Bones 🔧 Compatibility TLR 22X TLR 22 5.0 Replaces: TLR232138 A premium performance upgrade for competitive racers looking to reduce drivetrain weight, improve responsiveness, and maximize efficiency on the track.  

Read more less

Restore smooth performance and reliability in your Traxxas X-Maxx with the FastEddy Bearing Kit TFE4324. This complete replacement bearing set includes all the high-quality bearings needed to refresh your drivetrain and wheel assemblies, helping reduce friction and keep your monster truck running smoothly. FastEddy bearings are known throughout the RC industry for their precision manufacturing, durability, and smooth operation, making them a great choice for maintenance or a full rebuild. ⚙️ Smooth & Reliable Performance Replacing worn bearings can dramatically improve drivetrain efficiency and reduce resistance throughout the vehicle. A fresh bearing kit helps restore smooth rotation, improved efficiency, and longer component life. 🛠️ Precision Quality Each bearing in this kit is manufactured to tight tolerances for proper fitment and long-lasting durability, making it ideal for high-power vehicles like the Traxxas X-Maxx. ⚡ Features Complete replacement bearing kit for Traxxas X-Maxx Precision-manufactured for smooth performance Reduces drivetrain friction and wear Ideal for maintenance or full vehicle rebuilds Durable construction for high-power RC vehicles 📦 Includes (7) 5x11x4 Bearings (2) 6x13x5 Bearings (3) 10x15x4 Bearings (1) 12x18x4 Bearing (8) 15x24x5 Bearings (4) 17x26x5 Bearings (4) 20x27x4 Bearings A must-have maintenance kit for Traxxas X-Maxx owners looking to keep their truck running smooth, efficient, and ready for serious bashing. XMAXX BEARINGS  X MAXX BEARINGS  

Read more less

Take your ARRMA Granite or Vorteks BOOST vehicle to the next level with the ARRMA Wide Arm BOOST Box. This upgrade kit widens your vehicle’s suspension geometry, increasing stability and improving overall handling for better performance on rough terrain and during high-speed runs. Designed as a simple bolt-on upgrade, the kit also includes longer links and helpful installation resources to make the process quick and straightforward. 🏁 Improved Stability & Handling The wider suspension arms expand the vehicle’s track width, helping your truck stay planted during cornering, jumps, and aggressive driving. The wider stance improves overall stability and reduces the chances of rollovers when pushing your vehicle harder. 🔧 Complete Suspension Upgrade Kit Unlike basic suspension upgrades, the Wide Arm BOOST Box includes everything needed to properly widen the suspension setup. Along with the extended arms, the kit includes longer turnbuckles and wishbones to ensure proper geometry and fitment. A QR code included in the package links to a step-by-step installation video to help guide you through the upgrade process. ⚡ Features Designed for ARRMA Granite and Vorteks BOOST vehicles Wider suspension arms increase track width Improves stability and cornering performance Reduces rollover tendency during aggressive driving Includes longer suspension links and turnbuckles QR code with step-by-step installation video Includes ARRMA BOOST decals 📦 Includes (1) Assembled Front Left A-Arm (1) Assembled Front Right A-Arm (1) Assembled Rear Left A-Arm (1) Assembled Rear Right A-Arm (6) 48mm Link Turnbuckles (1) ARRMA BOOST Wide Arm Upgrade Product Manual (1) ARRMA BOOST Decal Sheet A great upgrade for drivers looking to add stability, durability, and improved handling to their ARRMA Granite or Vorteks BOOST platform.  

Read more less

Transform your Axial SCX30 with the Injora MBL32-NANO Brushless ESC and Green Viper 1621 Motor Combo. This compact brushless system delivers whisper-quiet operation, ultra-smooth throttle control, and powerful climbing performance designed specifically for micro crawling. With refined low-speed control and strong torque when needed, this combo gives your SCX30 the precision and power to conquer technical terrain. 🧗 Purpose-Built Brushless Power Designed specifically for the Axial SCX30, this combo combines a compact waterproof ESC with the high-torque Green Viper 1621 outrunner motor. The system provides extremely smooth throttle response and quiet operation, giving you greater control while navigating rocks, roots, and steep climbs. ⚡ Compact ESC with Advanced Control The MBL32-NANO ESC features a tiny footprint while delivering strong performance: 25A continuous / 45A burst current Adjustable 6V or 7.4V BEC Waterproof design for all-weather crawling PC programmability via USB This small but powerful ESC keeps your crawler responsive while maintaining clean wiring and minimal weight. 🏁 High-Torque Green Viper Motor The included 1621 Green Viper brushless outrunner motor features a 12-pole design that produces smooth low-speed rotation and strong torque for technical crawling situations. It provides: Smooth low RPM control Powerful climbing torque Quiet operation compared to brushed motors ⚡ Features Designed specifically for the Axial SCX30 micro crawler Whisper-quiet brushless operation Ultra-smooth and linear low-speed throttle response Strong power for climbs and acceleration Compact lightweight ESC design Waterproof ESC for all-weather performance High-torque 12-pole 3600kV outrunner motor Adjustable 6V / 7.4V BEC with 3A output Reinforced motor wiring with protective sleeve 📦 Includes (1) MBL32-NANO Brushless ESC (1) Green Viper 1621 Brushless Outrunner Motor 📊 ESC Specifications Application: 1/30 Rock Crawler Motor Type: Brushless Sensorless Input Voltage: 2–3S LiPo Continuous Current: 25A Burst Current: 45A BEC Voltage: 5.5V / 7.4V BEC Current: 3A Battery Connector: PH2 Programming: PC via USB 📊 Motor Specifications Motor Type: Brushless Sensorless kV Rating: 3600kV Poles: 12 Slots: 9 Input Voltage: 2S LiPo recommended Output Shaft: 1.7mm Dimensions: 15.5 × 21.5mm Weight: 14.9g ⚠️ Note: Due to the motor’s kV rating, this system should be used with 2S LiPo batteries only.A standalone receiver is required to complete installation. For SCX30 owners looking for quiet operation, smooth control, and serious crawling power, the Injora Green Viper brushless combo is a massive performance upgrade.

Read more less

Upgrade your micro crawler steering with the Injora N30 Nano High Torque Servo, designed specifically as a drop-in steering upgrade for the Axial SCX30. Featuring an aluminum case and metal gear drivetrain, this servo delivers stronger steering performance while adding beneficial weight to the front of the vehicle. Built for durability and precise control, it’s a major improvement over the stock servo for demanding crawling conditions. 🧗 High Torque Crawling Performance Producing 20.83 oz-in of torque at 6V, the N30 Nano provides powerful steering authority for technical terrain and obstacles. The added front-end weight from the aluminum case improves balance and traction on lightweight SCX30 rigs, helping keep the tires planted during climbs and side-hill sections. 🏗 Durable Metal Construction The servo features a machined aluminum case and all-metal gears, improving durability and longevity compared to stock plastic servos. This rugged design ensures consistent steering performance even under heavy load. ⚡ Features Direct drop-in fit for Axial SCX30 20.83 oz-in torque at 6V All-metal gear construction Machined aluminum servo case Added low front-end weight for improved traction Pulse width modulation control for precise steering Includes aluminum servo saver 📦 Includes (1) N30 Nano Micro Servo (1) Aluminum Servo Saver 📊 Specifications Application: SCX30 Input Voltage: 5–6V Speed @ 6V: 0.050 sec / 60° Torque @ 6V: 20.83 oz-in (1.5 kg-cm) Motor Type: Coreless Brushed Gear Material: Metal Dimensions: 21.45 × 15.2 × 12.85 mm Weight: 7g If you're looking to improve steering strength, durability, and front-end traction, the Injora N30 Nano servo is one of the best upgrades available for the SCX30 platform.

Read more less

The Traxxas Funco Pro Scale Sand Car Receiver Box Set (7724X) is a genuine replacement component designed for the Traxxas Funco Pro Scale Sand Car platform. This receiver box protects your vehicle’s electronics by securely housing the receiver and helping shield it from dirt, sand, and debris during operation. Perfect for replacing damaged components or during a rebuild, this receiver box helps maintain reliable electronics protection and keeps your Funco Pro Scale Sand Car running smoothly in demanding off-road conditions. Features• Genuine Traxxas replacement part• Protects receiver and electronics from sand, dust, and debris• Maintains secure mounting and clean wiring layout• Designed specifically for the Traxxas Funco Pro Scale Sand Car Includes• (1) Receiver Box Set

Read more less

Upgrade the strength, adjustability, and style of your Traxxas truck with the Traxxas Aluminum Turnbuckle Camber Link Set (3741X). Designed for models like the Rustler, Stampede, and Slash 2WD, these aluminum turnbuckles provide improved durability and easier suspension adjustments. Manufactured from high-grade 7075-T6 aluminum, these camber links deliver excellent bending stiffness while remaining lightweight. In fact, they are lighter than stock steel turnbuckles and approximately 35% lighter than titanium, helping reduce overall vehicle weight without sacrificing strength. Finished in a brilliant red anodized coating, these links also add a clean performance look to your build. The set includes a matching 5mm aluminum wrench that allows quick camber adjustments while preventing damage to the anodized finish. Each turnbuckle comes fully assembled with rod ends and hollow balls, making installation quick and simple. Features• 7075-T6 aluminum construction for strength and stiffness• Lighter than stock steel turnbuckles and 35% lighter than titanium• Red anodized finish for durability and style• Easy camber adjustments with included 5mm aluminum wrench• Pre-assembled with rod ends and hollow balls for quick installation Compatibility• Traxxas Rustler 2WD• Traxxas Slash 2WD• Traxxas Stampede 2WD• Traxxas Nitro Slash Includes• (4) Aluminum Camber Turnbuckles (Red)• (1) 5mm Aluminum Wrench

Read more less

Improve stability and cornering performance on your Traxxas Slash 2WD with the Hot Racing Front & Rear Wide Sway Bar Set (HRATE311SLC). Designed to reduce chassis roll and improve handling balance, this sway bar kit helps keep your Slash 2WD planted and predictable through corners. The wide sway bar design increases suspension stability during high-speed turns and aggressive driving, making it a great upgrade for racers and bashers looking to sharpen the handling of their Traxxas Slash. Features• Front and rear sway bar system for improved handling• Wide sway bar design helps reduce chassis roll• Improves cornering stability and control• Durable construction for long-lasting performance• Ideal upgrade for Traxxas Slash 2WD Compatibility• Traxxas Slash 2WD Includes• (1) Front Sway Bar Assembly• (1) Rear Sway Bar Assembly• Installation hardware and components  

Read more less

Upgrade the steering precision of your micro crawler with the Reefs RC SX30 Aluminum Servo Arm & Ball Stud (SEHREEFS286). Designed specifically for the Reefs RC SEHREEFS285 SX30 servo, this precision-machined aluminum servo arm eliminates the flex commonly found in stock plastic servo horns. The rigid machined aluminum construction improves steering consistency and durability, helping deliver more accurate steering response during demanding trail runs. A 20T spline ensures a precise fit on the SX30 servo, while the included stainless steel pivot ball provides increased strength and long-term reliability. For added convenience, the hardware features preinstalled thread lock, helping keep everything secure during installation and extended use. Features• Machined aluminum servo arm for improved strength• 20T spline designed for the SEHREEFS285 SX30 servo• Eliminates flex found in stock plastic servo horns• Black anodized finish with etched Reefs RC logos• Stainless steel pivot ball for increased durability• 2mm upgraded thread size for improved strength• Preinstalled thread lock for easy installation Includes• (1) Aluminum Servo Arm• (1) Stainless Steel Pivot Ball  

Read more less

Unleash serious performance in your micro crawler with the Furitek Nano Komodo 3800kV Brushless Motor (FTK-FUR-2740). Designed for platforms like the Axial SCX30 and Redcat Ascent-32, this compact outrunner motor delivers incredible torque, ultra-smooth low-RPM control, and powerful performance for technical crawling. Built with a high-torque 12-pole brushless design, the Nano Komodo provides buttery smooth throttle response and precise control when navigating rocks, climbs, and tight obstacles. Its compact lightweight design fits easily in tight chassis spaces, making it perfect for micro crawler builds. Installation is simple thanks to its plug-and-play design, requiring no modifications for compatible setups. Whether you're upgrading your SCX30 crawler or building a high-performance Ascent-32, the Nano Komodo delivers reliable power and exceptional crawling control. Features• 3800kV high-torque 12-pole brushless motor• Outrunner design for smooth power delivery• Buttery-smooth low RPM performance for technical crawling• Compact, lightweight construction for micro chassis• Plug-and-play installation with no modifications required• Ideal upgrade for Axial SCX30 and Redcat Ascent-32 Specifications• kV Rating: 3800kV• Motor Type: Brushless – Sensored• Voltage: 2–3S LiPo (7.4–11.1V)• Shaft Length: 0.236 in (6mm)• Shaft Diameter: 0.059 in (1.5mm)• Suggested Application: Optimized for Redcat Ascent-32 Includes• (1) Furitek Nano Komodo Brushless Outrunner Motor• 11T Pinion Gear Installed A powerful upgrade for builders looking to maximize performance from their SCX30 or Ascent-32 micro crawler.  

Read more less

Restore proper chassis rigidity and suspension linkage positioning with the Team Associated RC10B7.1 Top Plate & Ballstud Mounts (92586). Designed specifically for the B7.1 buggy platform, this replacement set helps maintain consistent handling performance and precise suspension alignment. The top plate plays an important role in maintaining chassis structure, while the ballstud mounts ensure accurate suspension linkage positioning for smooth and predictable steering response. Replacing worn or damaged components helps keep your Team Associated B7.1 performing consistently during both practice and competitive racing. Ideal for routine maintenance, rebuilds, or race-day preparation, this set helps keep your buggy dialed in and ready for the track. Features• Genuine Team Associated replacement components• Helps maintain chassis rigidity and structural alignment• Ensures accurate suspension linkage positioning• Supports consistent steering and handling performance• Designed for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Top Plate & Ballstud Mounts Set   Features• -1° rear toe geometry adjustment for suspension tuning• Factory Team aluminum construction for strength and precision• Improves rear suspension alignment and durability• Designed for 3-gear gearbox configuration• Ideal tuning upgrade for the Team Associated B7.1 platform Includes• (1) RC10B7.1 Factory Team 3-Gear Gearbox Aluminum Arm Mount “C” Block (-1°)          

Read more less

The Team Associated RC10B7.1 Factory Team Carbon Front Suspension Arms (92575) are a premium upgrade designed to enhance front-end responsiveness and steering precision. Featuring carbon construction, these arms reduce weight while increasing stiffness, delivering a sharper and more connected steering feel for competitive racing. Engineered for seamless integration with the RC10B7.1 platform, these Factory Team components maintain consistent suspension geometry and provide the precision and durability demanded by high-level racers. Features• Increased steering precision for improved front-end response• Lightweight carbon construction reduces front-end weight• Maintains consistent suspension geometry• Factory Team performance upgrade• Direct replacement design for easy installation Includes• (1) Left RC10B7.1 Factory Team Carbon Front Suspension Arm• (1) Right RC10B7.1 Factory Team Carbon Front Suspension Arm    

Read more less

The Trinity Slot Machine 2 Certified 21.5T Brushless Motor is built for competitive stock-class racing, delivering smooth power, excellent efficiency, and race-proven consistency. Each certified motor is hand-selected for the lowest resistance and highest performance, ensuring racers get a top-performing motor right out of the package. With a sensored brushless design and precision construction, the Slot Machine 2 provides the throttle control and reliability needed for tight racing and long mains. 🏁 Certified Race Performance The Certified version of the Slot Machine 2 motor is individually tested and selected from production batches to deliver the best electrical efficiency and power output. This process ensures consistent performance that serious racers can trust. The machined aluminum motor can reduces weight while improving heat dissipation, helping the motor stay cool and consistent during demanding race conditions. ⚙️ Tunable Endbell An adjustable endbell with laser-etched timing marks allows for quick and accurate timing adjustments, making it easy to fine-tune performance for different track conditions. ⚡ Features Certified hand-selected motor for maximum performance Selected for lowest resistance and peak output Sensored brushless design for smooth throttle response Lightweight machined aluminum motor can Improved cooling for consistent race performance Tunable endbell with laser-etched timing adjustments Ideal for competitive 21.5 stock-class racing 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (21.5T) Built for racers who demand maximum efficiency, precision tuning, and consistent performance, the Slot Machine 2 Certified 21.5T motor is a strong contender for competitive stock racing.  

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less