Search results for "Team Associated"

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Lightweight. Rigid. Race-Ready. Step up your B8.4’s performance with the Factory Team 81 mm Carbon Rear Suspension Arms — precision-engineered to deliver tighter control, improved cornering stability, and consistent handling from start to finish. Designed for racers chasing maximum response and rear-end confidence, these arms bring pro-level refinement straight to your buggy. Race-Ready Design Constructed from lightweight carbon composite, these arms reduce flex and lower overall weight without sacrificing strength. The result is a more connected feel on high-traction tracks, smoother transitions through technical sections, and sharper feedback under load. Features: Lightweight performance upgrade for Team Associated RC10 B8.4 / B8.4D Increased rigidity for enhanced rear-end feel Durable carbon composite construction Factory Team engineered precision for competitive racing Includes: (1) Factory Team Carbon Rear 81 mm Suspension Arm (4) Shims Team Associated Factory Team — Engineered to Win.    

Read more less

Team Associated RC10B7 Aluminum Rear Ballstud Mount – Lightweight & Durable Upgrade 🔧 The Team Associated RC10B7 Aluminum Rear Ballstud Mount is a precision-machined replacement part designed to enhance strength and consistency in your buggy’s rear suspension. Built from lightweight aluminum, this mount ensures durability and minimizes flex under load, helping maintain consistent camber gain and suspension response during high-speed cornering. 🔧 Key Features: ✅ CNC-machined aluminum for precision and durability✅ Reduces flex for consistent camber and roll-center performance✅ Lightweight design helps lower unsprung weight✅ Simple drop-in replacement for stock rear ballstud mount 📦 Includes: (1) Aluminum Rear Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Strength where it matters most.Upgrade your rear suspension with this high-precision aluminum ballstud mount for improved performance lap after lap. 🏁

Read more less

Team Associated FT Center CVA Bone 45.5mm (for Decoupled Slipper) – ASC92371 Factory-Grade Drivetrain Performance The 45.5mm Factory Team Center CVA Bone is designed for use with the RC10B74.2 and B74.2D when equipped with the FT Decoupled Slipper system. This lightweight and durable center bone provides smooth and efficient power transfer, helping reduce rotational mass for optimized drivetrain performance in 13.5T class racing. ⚙️ Features: ✅ 45.5mm Length – Perfect fit for use with the FT Decoupled Slipper system ✅ Precision Machined – Ensures smooth operation and tight tolerances ✅ Lightweight Design – Reduces rotational mass for faster acceleration ✅ Factory Team Quality – Built for competition use 📦 Includes: (1) 45.5mm Center CVA Bone ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D Use with ASC92367 FT Decoupled Slipper Outdrive 🔁 Ideal for racers running the lightweight driveline setup—maximize performance and consistency on the track!

Read more less

Team Associated Factory Team 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated B74.2 platform. Constructed from high quality titanium these offer increased durability over stock components and replace all the stock turnbuckles.Includes: (2) 3.5x45mm Titanium Turnbuckles (4) 3.5x42mm Titanium Turnbuckles (1) 3.5x35mm Titanium Turnbuckle COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

🔩 Essential Replacement Set Screws for Your RC28RMaintain precision and reliability with the Team Associated RC28R M2 Set Screw Hardware Set — a genuine factory replacement kit designed to keep your micro racer performing at its best. ⚙️ About the Hardware Set These M2 set screws are crucial for securing key drivetrain and suspension components throughout your RC28R. Made from high-strength steel, they deliver a tight, durable fit that resists vibration and loosening during high-performance runs. 🌟 Features Factory replacement M2 set screws for the RC28R Perfect for drivetrain, suspension, and linkage applications Precision-machined threads for smooth, reliable installation Durable steel construction ensures long-lasting performance Ideal for repairs, rebuilds, and maintenance kits Includes: (1) M2 Set Screw Hardware Set Compatibility: Team Associated RC28R Team Associated RC28 🧰 Stay race-ready — replace worn or lost set screws with this precision-engineered Team Associated hardware set and keep your RC28R running smooth and secure.    

Read more less

Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design

Read more less

Team Associated 3.5x44.5mm TiN Rear Shock Shafts (2) Durability Meets Smooth Performance. These 3.5x44.5mm Titanium Nitride-coated rear shock shafts are precision replacements designed for the Team Associated RC8T4 and RC8T4e vehicles. Built to withstand the rigors of 1/8-scale racing, they deliver smooth shock movement and enhanced durability. 🔧 Features: ✅ Titanium Nitride (TiN) Coated for reduced friction and extended wear life ✅ High-Precision Fitment ensures optimal shock performance ✅ 3.5mm Diameter, 44.5mm Length — rear shock compatibility ✅ Built for RC8T4 & RC8T4e Team Associated vehicles 📦 Includes: (2) 3.5x44.5mm TiN Rear Shock Shafts 🏁 Reinforce your rear suspension with Factory Team reliability and proven performance!

Read more less

Team Associated RC10B7 Top Plate & Ballstud Mount Set. This replacement set is intended for the Team Associated RC10B7 1/10 buggy. Package includes one top plate and one ballstud mount. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Team Associated RC10B74.2 Rear Gearbox. This is a replacement gearbox intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one lower rear gearbox, one upper rear gearbox and one sway bar retainer. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less