Search results for "traxxas"

Traxxas Power Cell LiPo Battery (3S, 11.1V, 6400mAh, 25C) w/iD ConnectorBig Power. Big Capacity. Built for Traxxas Performance. Battery Overview:When speed, runtime, and reliability matter, the Traxxas 3S 6400mAh Power Cell LiPo delivers. This high-performance 11.1V LiPo battery is engineered specifically for Traxxas vehicles and is optimized to extract every ounce of performance from your 3S-compatible model. Whether you're chasing top speed or extended bash sessions, this pack is your power advantage. NOTE: VXL Brushless models are compatible with 2S or 3S LiPo XL-5 Brushed models are compatible with 2S LiPo ONLY Requires a Traxxas iD® Charger for safe and proper charging Key Features:✅ 6400mAh Capacity – Massive runtime for long sessions✅ 25C Discharge Rate – Delivers up to 160A continuous power✅ Hard-Wired iD Connector – Simplifies charging and ensures correct settings✅ High-Current Traxxas Connector – Virtually zero voltage loss✅ Center Wire Exit – Perfect fit for Traxxas chassis layouts✅ Semi-Rigid Construction – Greater capacity in a more compact size✅ Maxx Cable® 12AWG Wire – Maximum current flow, ultra-flexible silicone insulation✅ Lifetime Battery Exchange Program – Traxxas has your back, even after the warranty What Makes it Special: Built for Brushless Power: Pushes 3S-capable Traxxas vehicles to their limit No Foam Blocks Needed: Designed to factory-fit Slash, Slash 4x4, and other Traxxas platforms Safe & Simple Charging: iD technology eliminates setup guesswork Visible Puffing Protection: Semi-rigid packs reveal damage before it becomes dangerous Specs: Type: LiPo Voltage: 11.1V (3S) Capacity: 6400mAh Continuous Discharge: 25C (160A) Max Burst Rate: 50C (320A) Watt Hours: 71.04Wh Charge Rate: 2C Max (12.6A) Dimensions: 138 x 41 x 43mm Weight: 17.7oz (502g) ⚠️ IMPORTANT: For Traxxas iD Chargers ONLY NEVER charge with a non-iD charger  ALWAYS use models with Low Voltage Detection enabled

Read more less

Upgrade your suspension with the premium GT-Maxx Aluminum Shocks from Traxxas, available in vibrant anodized finishes to match your style! These high-performance shocks are a direct replacement for the front of the Traxxas Sledge and also compatible with the Traxxas Maxx when equipped with GT-Maxx hardware. 💥 Features: Heavy-duty aluminum shock bodies for maximum durability Available in Blue, Red, Orange, or Green anodized finishes Pre-assembled for easy installation Tuned for performance and control on rough terrain Designed to withstand high-impact bashing 📦 Includes: (2) GT-Maxx Aluminum Front Shocks (pre-assembled) ⚠️ Note: Shock springs are not included and must be purchased separately. Customize your ride and take control with GT-Maxx shocks—built for serious performance!

Read more less

Get maximum traction in sand and loose terrain with the Traxxas pre-mounted paddle tire set for the Unlimited Desert Racer. These tires come factory-mounted on black wheels, fully assembled with foam inserts and glued, so they’re ready to bolt on and run. Features: Designed specifically for sand and loose surfaces Pre-mounted on black wheels Foam inserts installed Factory glued for reliability 17mm hex mounting Ready-to-run convenience Includes: (2) Pre-mounted paddle tires with wheels Compatibility: Traxxas UDR Unlimited Desert Racer® 6S Part Number: 8475 Perfect for dune running, beach bashing, or any terrain where paddles deliver the ultimate forward bite.  

Read more less

  RPM Traxxas X-Maxx Upper & Lower A-Arms (Black) (2) – RPM82352 Upgrade your Traxxas X-Maxx with the durability and performance of RPM Upper & Lower A-Arms. Designed to take on extreme terrain and the X-Maxx’s massive weight, these arms feature reinforced construction inspired by RPM’s proven 1/5-scale Baja A-arm designs. Key Features: Ultra-strong design to handle extreme bashing Double support beams on lower arms for impact energy distribution Improved ground clearance over stock arms Universal fit – works on any corner of the X-Maxx Molded from RPM’s legendary engineering-grade nylon Made in the USA Backed by RPM’s limited lifetime warranty Fitment Notes: Replaces Traxxas TRA7729 (upper), TRA7730 & TRA7731 (lower) Includes (1) Upper and (1) Lower A-Arm Requires 4 packages to fully outfit one truck Built for brutal terrain and heavy hits—RPM arms mean fewer repairs and more track time.

Read more less

Traxxas Hoss 54T Spur Gear – 0.8 Metric Pitch (32P Compatible) – Part 3956XHigh-Torque Gear for Big Power Builds. The Traxxas 3956X 54-Tooth Spur Gear is specifically designed for the Hoss 4X4 VXL 4WD Monster Truck, providing durable power transfer for aggressive driving and brushless torque. With 0.8 Mod metric pitch (compatible with 32-pitch), it’s the perfect match for high-load conditions. ✅ 54-tooth spur gear – factory spec for torque-heavy setups✅ 0.8 Mod (metric pitch) – compatible with 32-pitch pinions✅ Heavy-duty molded construction – strong and durable✅ Designed for Hoss 4X4 VXL – optimized for monster truck drivetrain✅ Requires Traxxas #6780 Center Differential for installation 📦 Includes: (1) 54T Spur Gear (0.8MP / 32P compatible) Part #: 3956X 💡 Note: This spur gear is not a direct bolt-on—you’ll need the TRA6780 center differential to install it properly on the Hoss 4X4 VXL.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Dress It Up. Toughen It Up. Give your TRX-4M or TRX-4MT a clean, polished look with the Traxxas Stainless Steel Hardware Kit. This premium upgrade replaces your factory hardware with high-quality stainless steel screws and fasteners, offering enhanced corrosion resistance, durability, and style. Performance Meets Style Engineered to the same precise standards as the original Traxxas components, this kit is perfect for drivers who want both performance and presentation. The stainless finish not only adds a sleek look but also protects against rust and wear — ideal for all-weather crawling and long-term reliability. Features: Complete stainless steel hardware upgrade kit Corrosion-resistant finish for lasting durability Adds a custom polished look to your TRX-4M or TRX-4MT Direct replacement for the factory hardware kit Includes all necessary screws and fasteners Genuine Traxxas factory-quality components Includes: (1) Complete Stainless Steel Hardware Kit Compatibility: Traxxas TRX-4M Traxxas TRX-4MT Traxxas Tough — Stainless Style That Lasts.

Read more less

RPM Hybrid Gearbox Housing & Rear Mounts (Black)PART #: RPM73612 Upgrade your Traxxas 2WD vehicle with the RPM Hybrid Gearbox Housing and Rear Mounts — engineered for unmatched strength, heat dissipation, and long-term durability. This hybrid setup combines a CNC-machined aluminum motor plate with RPM’s signature ultra-tough molded nylon housing and rear mounts, delivering a rugged solution for racers and bashers alike. Fits: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Bandit Traxxas Stampede 2WD Key Features:Aluminum Motor Plate: 3mm thick 6061 T6 aluminum plate Locks in gear mesh for consistent settings Helps dissipate motor heat Not integrated into bumper mounts — no flex on rear impacts Molded Gearbox Housing: Made from RPM’s bulletproof nylon blend Fully enclosed design keeps debris out Compatible with stock motor cover Eliminates bottom hole from stock housing for cleaner internals Quieter operation than stock Rear Mounts (0° and 3° Included): Two sets of rear mounts included: 0° and 3° toe-in Easily serviceable—no need to remove the entire transmission Molded for tight tolerances with minimal suspension slop What’s Included: Hybrid gearbox housing 0° and 3° rear A-arm mounts 3mm aluminum motor plate Mounting hardware and instructions Tech Notes: Internal transmission components (gears, bearings, shafts) not included — transfer these from your stock setup. Replaces Traxxas #3691 and #3691A. Minor trimming of stock A-arms may be needed; no issues with RPM rear arms.

Read more less

 ⚙️ Genuine Traxxas Replacement. Durable Driveline Performance. Keep your Traxxas Summit running smoothly with the genuine Traxxas Long Half Shaft Set. Designed as a direct OEM replacement, these heavy-duty plastic half shafts transfer power from the differential to the wheel axle while maintaining the strength and flexibility needed for demanding off-road driving. Each set includes two complete long half shafts with pre-installed rubber boots, making installation quick and getting you back on the trail faster. ⚡ Features: 🏁 Genuine Traxxas OEM replacement parts💪 Durable molded composite construction for long-lasting reliability⚙️ Provides smooth and efficient power transfer to the wheels🛡️ Pre-installed rubber boots help protect driveline components from dirt and debris🔧 Direct-fit replacement for simple installation🚀 Perfect for repairs, maintenance, or keeping spare parts on hand 📦 Includes: (2) Long Plastic Half Shaft Assemblies Pre-Installed Rubber Boots Note: CV Stub Axles and CV Output Drive Set are not included. 📏 Specifications: Part Number: TRA5656 Type: Long Half Shaft Set Material: Composite Plastic 🔧 Compatibility: ✅ Traxxas Summit Fits Position: Right Front Left Rear 💡 Pro Tip: For the best drivetrain performance, replace damaged half shafts in matching pairs and inspect the CV stub axles, drive cups, bearings, and differential outputs during installation. Keeping the entire driveline in good condition helps reduce wear, minimize vibration, and ensure reliable power delivery on even the toughest trails. 🏁⚙️🔧

Read more less

Conversion Kit Overview:The Traxxas Slash 4X4 Body Conversion Kit upgrades your truck to a clean, secure clipless body mounting system. Designed for convenience and durability, this kit eliminates traditional body clips while keeping your body firmly in place for a sleek, modern setup. 🔧 Key Features Converts Slash 4X4 to clipless body mounting Clean, clip-free body installation Secure latching system Direct fit Traxxas upgrade Improves ease of body removal and installation 📦 Includes Front Body Mounts Rear Body Mounts Latches Mounting Hardware 🚗 Compatibility Traxxas Slash 4X4 Traxxas Slash 4X4 Ultimate A simple upgrade that cleans up your build and makes body removal faster and easier—perfect for anyone looking to ditch body clips for good.  

Read more less

Keep your RC running smooth and efficient with this pair of Traxxas 6x13x5mm Ball Bearings. Designed as direct replacements, these high-quality bearings reduce friction and improve performance wherever they’re used. 🛠️ Features: Genuine Traxxas replacement part Precision 6x13x5mm ball bearings Helps maintain smooth and reliable drivetrain operation Perfect for maintenance or upgrades Includes:(2) 6x13x5mm Ball Bearings A simple upgrade that makes a big difference in durability and speed—don’t hit the track without them!

Read more less

⚡🏁 Factory Brushless Power for Your Traxxas BL-2s Vehicle The Traxxas BL-2s 3300kV Brushless Motor is a genuine replacement motor designed to restore the powerful, reliable performance of your BL-2s-equipped Traxxas vehicle. Engineered specifically for use with the Traxxas BL-2s ESC, this motor delivers strong 2S acceleration, smooth operation, and dependable durability for everyday bashing. Featuring an integrated cooling fan and low-friction bearings, the BL-2s motor is built to run cooler and more efficiently, helping maximize performance and motor life. 🏁 About the BL-2s Brushless Motor ⚡ Efficient Brushless Performance The 3300kV brushless design delivers excellent torque and responsive acceleration while maintaining the reliability expected from Traxxas factory electronics. 🌬️ Built-In Cooling An integrated cooling fan and premium low-friction bearings help reduce operating temperatures for improved efficiency and long-lasting performance. 🔌 Quick & Easy Installation The single quick-connect motor plug is designed to work seamlessly with the Traxxas BL-2s ESC, making installation fast and hassle-free. 🔧 Features ✔ Genuine Traxxas replacement motor✔ 3300kV brushless design✔ Designed specifically for the BL-2s ESC✔ Integrated cooling fan✔ Low-friction bearings for efficient operation✔ Quick-connect motor wiring✔ Delivers powerful 2S performance 📦 Includes (1) Traxxas BL-2s 3300kV Brushless Motor 🚗 Compatibility Compatible with: Traxxas Mini Maxx Traxxas Mini Slash Traxxas Rustler 4x4 Traxxas Slash 2WD Traxxas Slash 4x4 Traxxas Slash Late Model Traxxas Slash Modified ⚠️ Notes Genuine Traxxas replacement part. Designed for use with the Traxxas BL-2s ESC only. For 2S LiPo operation only. Verify compatibility with your specific vehicle before installation. Verify compatibility with your specific vehicle before installation.

Read more less