Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

The Avid Triad Direct Drive for the Team Associated B7 is designed for stock racers looking to eliminate the slipper clutch and reduce rotating mass for maximum drivetrain efficiency. By removing the entire clutch assembly, you get direct power transfer with zero slip (other than the differential), resulting in sharper throttle response and a more connected feel on high-grip tracks. Weighing just 6.45g with a 72T spur installed (2.62g without spur), this is one of the lightest direct drive systems available. 🔥 Why Run Direct Drive? Some stock racers prefer direct drive for: Reduced rotating mass Immediate throttle response Consistent power delivery Simplified drivetrain setup It’s not for every track or driver, but in the right conditions it can offer a competitive edge. ⚙️ Features Eliminates full slipper clutch assembly Ultra-lightweight design (6.45g w/ 72T spur) All-aluminum construction Custom M3x48 aluminum topshaft screw Clean, secure install Easy conversion back to slipper setup No loose slipper screws to maintain Works with Avid Triad spur gears 📦 Includes (1) Direct Drive Aluminum Plate (1) 69T Triad Spur (1) 72T Triad Spur (1) M3x48 Aluminum Screw (1) Aluminum Hat Bushing (1) Aluminum Cone Washer (1) M3 Ringer Aluminum Nut Note: Works with Avid Triad spur gears (spur not included unless specified in package). 🛠 Installation Use B6.1 Triad Direct Drive assembly instructions (installation is the same for the B7). ✅ Compatibility Team Associated B7 For racers chasing maximum efficiency and minimal rotating mass, the Triad Direct Drive keeps things light, simple, and race-focused. 🏁  

Read more less

Restore smooth, consistent shock performance with the Team Losi Racing G3 TiNi Shock Shaft, designed for precision damping and long-lasting durability. Featuring a 3mm diameter and 48.7mm length, this shaft uses a TiNi coating to reduce friction and wear for smoother shock action and extended service life. Ideal for rebuilds or routine maintenance, this shock shaft helps maintain consistent suspension performance under demanding race conditions. Features: G3 TiNi-coated shock shaft 3mm diameter x 48.7mm length Reduced friction for smoother shock operation Increased wear resistance and durability Precision-machined for consistent performance Includes: (1) Shock Shaft Part Number: TLR-1129

Read more less

Maintain proper shock mounting geometry and smooth suspension movement with the Team Losi Racing Shock Standoff Arm Set. Designed specifically for the TLR 22X platform, these standoffs mount at the suspension arms and provide a precise, secure attachment point for the shocks. Ideal for replacement during maintenance or rebuilds, these components help ensure consistent suspension performance and reliable fit on race day. Features: Precision-fit shock standoffs for suspension arms Maintains correct shock mounting geometry Durable construction for racing use Direct replacement components Compatibility: Team Losi Racing 22X Includes: (2) Shock Standoffs (Arm) Part Number: TLR-1179  

Read more less

Refine front-end suspension performance with the Vision Racing (VR) -2mm Carbon Front Shock Tower V2 for the TLR 22X. Precision-cut from 4mm carbon fiber, this tower lowers the front shock mounting position by 2mm to help fine-tune handling, steering response, and overall consistency on high-grip or technical tracks. Designed to accept the stock front tower guard, the V2 version adds micro-tune shock positioning for precise setup adjustments. Additional webbing increases rigidity and strength, while the chamfered edges provide durability and a clean, professional finish. Features & Benefits: -2mm front shock height for optimized suspension geometry 4mm carbon fiber construction for strength and stiffness Accepts stock front tower guard Micro-tune shock positioning for precise setup changes Added webbing for extra strength Chamfered edges for durability and a premium look Compatibility: TLR 22X Includes: (1) Vision Racing TLR 22X -2mm Carbon Front Shock Tower V2 (4mm) A precision performance upgrade for racers looking to sharpen front-end feel and dialing capability on the TLR 22X platform.    

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

For Airtronics MT-4, MT-4S, MT-R, M12, M12S, M11X, and KoProPo EX-RR, MT-S transmitters Overview:Lightweight, long-lasting, and precision-built — the ProTek RC 7.4V 2800mAh LiPo Transmitter Battery is designed to power your Airtronics or KoProPo radio systems for marathon sessions without the bulk of standard NiMH packs. About the Transmitter Battery High-Performance LiPo Power for Pro-Level RadiosSpecifically engineered for top transmitters such as the Airtronics MT-4, M12, M11X, and KoProPo EX-RR, this 2S LiPo pack delivers up to 9–10 hours of runtime with rock-solid voltage stability. Weighing only 105g, it cuts transmitter weight by nearly 40% compared to a six-cell NiMH pack — perfect for long main events or full days at the track. Reliable Construction & Easy FitBuilt with premium lithium-polymer cells, this pack includes an XH balance lead and JR/Futaba-style discharge connector for compatibility with most chargers. Use soft foam padding inside your transmitter battery compartment for a snug, secure fit that keeps the pack in place during operation. Features: Specifically designed for Airtronics and KoProPo transmitters Lightweight LiPo chemistry — only 105g Up to 10 hours of continuous use per charge Reduces fatigue during long race days JR/Futaba connector and XH balance plug for universal compatibility Durable cell construction ensures consistent voltage and long cycle life Safety Notes: Always balance charge using a LiPo-specific charger Never over-charge, over-discharge, or leave batteries unattended Charge inside a LiPo safety bag Avoid exposure to direct sunlight or high-temperature environments Specifications: Specification Details Voltage 7.4V (2S LiPo) Capacity 2800mAh Chemistry Lithium-Polymer (LiPo) Charge Rate 1C Discharge Plug JR/Futaba Balance Plug XH Dimensions 99.2 × 31 × 17.9mm Weight 105g Includes: (1) ProTek RC 7.4V 2800mAh LiPo Transmitter Battery Pack

Read more less

Experience unmatched power and consistency with the NitroPro 2S 7.4V 8500mAh 140C Low-Profile Stick Pack. Built from the highest-grade proprietary cells available, this battery delivers blistering acceleration, rock-solid voltage retention, and the endurance top racers demand. 🔥 Key Features: High-output 140C continuous discharge for extreme performance Constructed from premium proprietary LiPo cells — maximum punch and reliability Low-profile stick pack design for optimal chassis balance Consistent voltage under heavy load for competitive racing conditions Built to exceed the demands of professional-level drivers ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 8500mAh Discharge Rate: 140C Dimensions: 25mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullets Weight: 319g 📦 Includes: (1) NitroPro 2S 7.4V 8500mAh 140C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Balance-charge every cycle and avoid over-discharging (keep cells above 3.2V) for maximum performance and lifespan.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

The XRAY Composite Front Bridge Upper Deck provides extra rigidity and stability to your chassis setup. Precision-molded from high-quality composite material, this part is designed for strength without unnecessary weight, giving your buggy the perfect balance of performance and durability. Features: Molded composite construction for strength and consistency Helps increase front-end stability Lightweight design maintains optimal chassis flex Direct replacement part for quick installation Compatibility: XRAY XB2 (various years) XRAY XT2 (various years)

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

Team Associated RC10 B6.2 CVA Axle (2) [91858] 🔧 Keep your ride tight and true! These Team Associated RC10 B6.2 CVA Axles are direct replacement parts designed to restore the performance and precision of your buggy's driveline. Whether you're rebuilding or just stocking up, these 2 high-quality axles are built to take the abuse of competitive 1/10 off-road racing. ✅ Compatible with B6.2 & B6.2D✅ Precision-machined for smooth drivetrain action✅ Sold in pairs Includes:(2) CVA Axles 📦 Part Number: 91858🏁 Brand: Team Associated

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less

Team Associated RC10B7 Chassis [92400] 🛠️ Built to Battle, Ready to RaceRefresh your ride with the Team Associated RC10B7 Chassis — the factory replacement designed to get your buggy back in action and keep it dominating the track. Crafted for strength and performance, this is the exact chassis used on the legendary RC10B7 platform. ✅ Precision fit✅ Factory quality✅ Made to handle serious abuse Includes:(1) RC10B7 Chassis Part Number: 92400Compatibility: RC10B7 1/10 Buggy

Read more less

Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm) – Fine-Tune Your Suspension! 📈 Dial in your shock performance with the Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm). These precision-machined pistons are ideal for customizing your shock's rebound and compression characteristics, allowing racers to adapt to various track conditions and driving styles. 🔧 Key Features: ✅ 13mm piston diameter with 2x1.9mm holes✅ 2.5mm thickness for controlled oil flow✅ CNC-machined for consistent performance✅ Ideal for tuning shock response and rebound speed✅ Factory Team quality for precision suspension setups 📦 Includes: (2) 13mm Shock Pistons (2x1.9mm, 2.5mm thick) ✅ Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 B6.4 Team Associated RC10 B6.4D Team Associated RC10 B74.2 Team Associated RC10 B74.2D Team Associated RC10 B74.2 CE 💡 Precision matters.Upgrade your suspension tuning with these Factory Team pistons for the ultimate in control and consistency. 🏆  

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated RC10 Factory Team 1.02 Gold Shock Shafts (2)PART: 6417 These Factory Team 1.02 Gold Shock Shafts are precision replacements for the original Team Associated RC10. Engineered for smooth shock action and durability, these shafts are a direct fit and deliver race-ready performance with signature gold coating. Includes: (2) 1.02 Gold Shock Shafts Compatibility: Team Associated RC10 (Original)  

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

Team Associated RC10B7 Factory Team Vented Slipper Hubs – ASC92451 Consistent Performance. Cleaner Operation. Upgrade your RC10B7 with the Factory Team Vented Slipper Hubs. These precision-engineered hubs feature vented slots that help flush debris from the slipper pad assembly—ensuring smoother, more consistent slipper action during demanding runs. ⚙️ Features: ✅ Factory Team upgrade for the RC10B7 ✅ Vented design expels debris from slipper area ✅ Enhances consistency and durability of the slipper clutch ✅ Ideal for high-traction and dusty conditions 📦 Includes: (2) Vented Slipper Hubs ✅ Compatibility: • • RC10B7

Read more less

JConcepts F2 Body for XRAY XB2 2024 (Standard Weight) – Includes Two 6.5" Wings🏁 Championship-Winning Design for Carpet, Turf, and Dirt Racing The JConcepts F2 body has become a go-to choice for top-tier performance in 1/10 scale off-road buggy racing. Now available for the XRAY XB2 2024, this body delivers a tight-fitting, aggressive layout with forward cab bias and aerodynamic enhancements, ready to take on any high-grip surface. The F2 shell integrates key design elements from the IFMAR World Champion platform, including chamfered side-pods, a louvered roof, and the unmistakable Finnisher "V" profile. Built to hug the chassis for a perfect fit, the body clears the spur gear guard and leaves room for performance parts while looking sharp on the track. 🎯 Key Features: Designed specifically for the XRAY XB2 2024 platform Original JConcepts F2 styling for performance and aesthetics Clear polycarbonate – standard thickness for balanced durability and flex Tight chassis fit with clean front-end coverage Louvered roof and rear kick-up stabilizer for enhanced downforce Double-step side-pods and Finnisher-inspired cab shape Built-in clearance for the spur gear guard Includes (2) 6.5" Carpet | Turf | Dirt Wings Comes with window masks and JConcepts decal sheet 📦 Includes: (1) F2 Clear Body for XRAY XB2 2024 – Standard Weight (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for display purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

Built for serious stock-class racers, the ProTek RC 2S 150C Stock Spec 4800mAh Shorty LiPo delivers explosive punch, ultra-low internal resistance, and consistent voltage from tone to tone. Featuring advanced Si-G cell technology and a low-profile LCG shorty design, this pack keeps your car balanced, planted, and fast all the way to the last lap. If you're chasing consistency and clean power delivery in 2WD or 4WD stock racing — this is the pack. ⚡ Stock-Class Performance You Can Trust With 150C discharge capability and extremely low internal resistance, this battery provides: Strong acceleration Stable voltage under load Lower operating temperatures Improved efficiency Extended cycle life The shorty LCG form factor helps optimize chassis balance and weight placement for modern race platforms. 🏁 Designed for Stock Racing This pack is engineered specifically for stock-class competition where smooth, consistent voltage is critical. The improved efficiency and reduced heat build-up keep performance predictable and reliable throughout your main. Features 4800mAh capacity 150C high-discharge rating Low IR Si-G cell technology LCG shorty hardcase design Lighter and thinner profile Strong runtime with aggressive punch 10C maximum charge rate (1C recommended for longest life) ROAR approved Includes (1) ProTek RC 2S 4800mAh Battery (2) 5mm Bullet Connectors Specifications Nominal Voltage: 7.4V (2S) Capacity: 4800mAh Max Charge Rate: 10C (40A) Peak Discharge: 150C Cell Configuration: 2S1P Watt Hours: 35.5Wh ROAR Approved: Yes Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions: 95.3 x 46.9 x 21.2mm Weight: 190g ⚠️ Important LiPo Safety Always balance charge Use a LiPo-specific charger Never leave charging batteries unattended Do not over-discharge (minimum 3.2V per cell) Use a LiPo safe charging bag Allow pack to cool before recharging Reliable voltage. Strong punch. Championship consistency. 🏆  

Read more less

Upgrade or replace your rear suspension with the Team Associated RC10B7.1 V2 Rear Suspension Arms. Designed for the latest B7.1 platform, these 78mm arms offer improved durability and performance, while also serving as a popular upgrade option for the original B7. ⚙️ Updated V2 Design. The V2 arms are engineered to provide: Improved durability under hard racing conditions Consistent suspension movement Reliable performance on high-bite surfaces like carpet and turf Perfect for racers pushing their cars to the limit. 🏁 Race-Ready PerformanceThese 78mm rear arms help maintain proper geometry and provide a stable rear end, giving you better confidence through corners and over jumps. ⚡ Features Genuine Team Associated replacement/upgrade part V2 updated design for improved durability 78mm rear suspension arms Smooth and consistent suspension performance Ideal for racing on carpet and turf   📦 Includes: (2) 78mm Rear Suspension Arms 🔧 Compatibility: RC10B7.1 (direct fit) RC10B7 (optional upgrade) A must-have replacement or upgrade to keep your B7 platform dialed in, durable, and race-ready.        

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🛡️🏁 Protect Your Chassis. Add Style. Built for Racing. The JConcepts RC10B7 Pre-Cut Chassis Protective Sheets are designed to protect the underside of your buggy while adding a clean, race-ready look. Precision cut for a perfect fit, these sheets help extend chassis life on carpet, turf, and dirt tracks. 🏁 About These Protective Sheets 🛡️ Durable Protection Made from highly durable material, these sheets protect your chassis from wear, scratches, and impact during racing. 🎯 Precision Fit Pre-cut specifically for the RC10B7 chassis, ensuring clean alignment and easy installation. 🎨 Race-Inspired Style Features JConcepts Speed Laboratory graphics with a high-energy design that complements any paint scheme. 🔧 Key Features ✔ Pre-cut for RC10B7 chassis✔ Durable material for long-lasting protection✔ Ideal for carpet, turf, and dirt racing✔ 2-piece design with 3 separate rear sections✔ High-impact JConcepts graphics✔ Helps reduce chassis wear 📦 Includes (2) Pre-Cut Chassis Protective Sheets 🚗 Compatibility Team Associated RC10B7 1/10 Buggy 🧰 Installation Tips Clean chassis thoroughly before application Peel backing and align from front to rear Follow chassis contours for best fit    

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Keep your drivetrain running smoothly with the Team Associated 54T Idler Gear for the 3-gear gearbox. This replacement idler gear is designed for RC10B7, RC10T7, and RC10SC7 platforms, delivering reliable power transfer and consistent performance. Precision molded for proper mesh and durability, this gear is ideal for replacing worn or damaged components to maintain drivetrain efficiency and smooth operation. 🔧 Features:• Replacement 54T idler gear for 3-gear gearbox• Designed for RC10B7, RC10T7, and RC10SC7 platforms• Precision molded for smooth gear mesh• Durable construction for long-lasting performance• Ideal maintenance or replacement part 📦 Includes:• (1) 3-Gear Gearbox Idler Gear ⚙️ Specifications:• Tooth Count: 54T• Gearbox Type: 3-Gear• Position: Idler Gear Keep your drivetrain dialed in with the Team Associated 54T idler gear, built for smooth performance and dependable durability.    

Read more less