Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

  Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts (2pcs) Durability Meets Precision. Upgrade your suspension with Team Associated’s V2 3x27.5mm Ti-Nitride Shock Shafts, engineered for ultra-smooth performance and long-lasting wear resistance. These shafts feature a screw-mount piston design—perfect for racers who demand consistency and reliability lap after lap. Compatible with specific buggy and truck shock bodies, these are a direct fit for serious performance upgrades. 🔩 Features: ✨ Ti-Nitride Coated – Hard coating increases wear resistance and reduces friction 🔧 Screw-Mount Design – Stronger and more secure piston mounting (no E-clips) 🚗 Vehicle Compatibility: Fits ASC91577 Buggy Rear Shock Bodies Fits ASC91578 Truck Front Shock Bodies ⚠️ Note: Not compatible with E-clip style pistons 📦 Includes: (2) 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts Trust Team Associated components for reliable performance and race-ready precision.

Read more less

1up Racing 7075 Aluminum Flanged Locknuts – M3 Upgrade your RC build with 1up Racing 7075 Aluminum Flanged Locknuts, engineered for maximum durability, lightweight performance, and striking aesthetics. Inspired by the smooth lines of the SoCal Hot Rod scene, these locknuts feature mirror-like chamfer details, a floating hex for optimal wrench engagement, and an oversized 11mm serrated flange for unbeatable security. Precision CNC-machined from premium 7075 aluminum, these locknuts deliver exceptional strength and longevity while keeping weight to a minimum. Available in 10 bold anodized colors, they add the perfect finishing touch to any setup. Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Superior bite and maximum security for worry-free racing.✅ Oversized 11mm O.D. Flange – Enhances grip and stability, preventing wheel slippage.✅ Low-Profile Design – Keeps weight low and ensures a clean, streamlined look.✅ Floating Hex Design – Optimal wrench engagement for easy, secure installation.✅ 7mm Outer Hex & M4x0.7mm Threads – Standard fitment for hassle-free compatibility.✅ Mirror-Like Chamfered Edges – Glistens under light, giving your ride an unmistakable premium touch.✅ Available in 10 Bold Anodized Colors – Customize your RC with a style that stands out. In the Box: (4) 1up Racing 7075 Aluminum Flanged Locknuts – M3 Precision, Performance & Style! Don’t settle for ordinary—elevate your RC with 1up Racing’s lightest and most colorful flanged locknuts. With race-proven performance, premium materials, and unmatched style, these locknuts are the perfect finishing touch for any build. 🔥 Order today and 1up your ride! 🏁💨

Read more less

Upgrade or replace with precision using the Team Associated RC10B6.4 Front Bulkhead Set, featuring both 0° and 2.5° kick-up options. This set is a direct replacement for the B6.4 front bulkhead and offers adjustability to fine-tune your front-end geometry depending on track conditions and driving style. 📦 Includes: (1) 0° Front Bulkhead (1) 2.5° Front Bulkhead 📌 Compatibility: Team Associated RC10B6.4 RC10B6.4D May also be compatible with other B6 series models with slight adjustments 🔧 Key Benefits: Multiple kick-up angles for tuning front-end response High-quality composite material for durability Factory Team precision fitment and finish Ideal for racers looking to customize handling feel on entry and through corners. Keep both angles on hand and swap as needed to match the track!

Read more less

  Push your racing to the limit with the ProTek RC 2S 130C Shorty LiPo—engineered with Si-Graphene+ HV technology for insane power delivery and ultra-low internal resistance. Perfect for stock and mod classes, this 7.6V 5000mAh shorty pack offers lightning-fast response and consistency lap after lap. 🔋 Features: 2S HV LiPo rated at 7.6V for higher voltage punch Massive 130C burst and low internal resistance for peak performance Silicon-Graphene+ chemistry for superior cycle life and thermal stability Lightweight shorty case for optimal weight distribution 5mm bullet connectors for high-current flow ROAR Approved for sanctioned competition 📦 Includes: (1) 5000mAh 2S 7.6V HV LiPo Shorty Battery (1) 5mm to 4mm bullet adapter set Specs: Capacity: 5000mAh Voltage: 7.6V (2S HV) C-Rate: 130C Dimensions: 96x47x25mm Weight: Approx. 219g Connector Type: 5mm bullet Whether you're racing onroad or offroad, stock or modified—this ProTek pack delivers the edge you need to win.

Read more less

This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.

Read more less

  Keep your transmission running smooth with this genuine TLR 22 4.0 laydown idler gear and shaft set. Designed specifically for the laydown transmission setup, this replacement set includes everything needed to restore drivetrain performance. ✅ Includes:• (2) Idler Gears• (1) Idler Shaft ✅ Compatible with: TLR 22 4.0 Laydown Transmission✅ OEM replacement for precise fit and function✅ Built tough for high-performance racing Essential for keeping your TLR 22 4.0 dialed in and track-ready.

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less

Team Exalt X-Rated 2S LiPo Battery (4400mAh/150C)📦 Part #: EXA3201 Dominate the track with the Team Exalt X-Rated 4400mAh 2S LiPo – engineered with next-gen chemistry for racers who demand maximum voltage, minimum resistance, and race-winning consistency. Whether you're running stock or mod, this pack delivers explosive acceleration and sustained punch all the way to the finish. ⚡ X-Rated Series Performance Highlights: 150C Continuous / 300C Burst Discharge Rate Silicon Graphene Technology for increased efficiency and lifespan Flat Discharge Curve means less sag, more power throughout your run Low Internal Resistance and cooler operating temps 5mm High-Amp Bullet Connectors for maximum current delivery ROAR Approval Pending 📊 Battery Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Discharge Rate: 150C Burst Rate: 300C Weight: 220g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're chasing podiums or pushing for personal bests, the EXA3201 X-Rated LiPo gives you the edge in acceleration, efficiency, and endurance.

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B7 Front Anti-Roll Sway Bars (5) [92459] 🌀 Precision in the Front, Grip in the Back!Upgrade your front-end handling with the Team Associated RC10B7 Front Anti-Roll Sway Bar Set. Whether you're fighting traction roll or just fine-tuning your buggy for max consistency, this 5-pack of sway bars gives you the tuning range you need to dominate any surface. Built for the RC10B7 and B7D platforms—just swap, test, and race! 🔧 Key Features:✅ Five sway bar options for ultimate front-end tuning🔄 Designed specifically for RC10B7 and B7D🎯 Helps maintain front grip and stability through corners🏁 Race-proven setup flexibility 📦 Includes:(5) Front Anti-Roll Sway Bars 🔩 Part Number: 92459🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

Fine-tune your chassis stiffness with the Team Associated RC10B6.4/B6.4D Factory Team Carbon Top Plate & Ball Stud Mount. This precision-crafted upgrade offers enhanced rigidity while allowing adjustable flex, giving racers more control over handling characteristics. Features: Carbon fiber construction for lightweight strength Adjustable top plate stiffness for fine-tuning handling Includes ball stud mount for secure, precise linkage connection Factory Team quality for professional-grade performance Compatibility: Team Associated RC10B6.4 Team Associated RC10B6.4D Includes: (1) Carbon Top Plate (1) Ball Stud Mount Perfect for competitive racers looking to dial in their chassis response and steering feel.

Read more less

JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or WhitePart Numbers: JCO3347Y (Yellow), JCO3347W (White) Upgrade your 1/10 buggy with these JConcepts Mono 2.2" Front Wheels, designed for performance, durability, and style. Available in bright white or fluorescent yellow, these wheels feature popular dish-style detailing and are molded using an advanced manufacturing process for maximum precision and strength. Perfect for racers running Team Associated B5, B5M, B4.1, or Kyosho RB5 platforms with 12mm hex conversions, these wheels offer great fitment, longevity, and modern styling. 🔧 Key Features: Fits: Team Associated B4.1/B5/B5M/B4.2 (w/ adaptors), Kyosho RB5 (direct fit) Quantity: 4 wheels per pack Color Options: White (JCO3347W), Yellow (JCO3347Y) ROAR-legal sizing with a dish-style concave design 12mm hex mount Vented design improves glue adherence Made from durable, race-proven material 🛠️ Compatibility Notes: For B4.1: Requires JConcepts clamping hexes (front/rear) and Team Associated hex conversion For Kyosho RB5: Use locking-style rear wheel nuts (JC #2089 Blue or #2090 Black) Designed for standard (wide) front-end configuration Will not work properly with narrow setups or without locking nuts on RB5 Specs: Feature Detail Position Front Diameter 2.2" Hex Size 12mm Quantity 4 Wheels Scale 1/10 Buggy Color Options White / Yellow Vehicle Type 2WD Buggy Bring style and performance to your front end with the JConcepts Mono wheels—perfect for racers who demand precision and durability on the track.

Read more less

Upgrade your drivetrain with this optional set of TLR 22X-4 68mm CVA Driveshaft Bones. Precision-engineered for the front/center position, these driveshafts deliver smoother power transfer, improved durability, and consistent performance lap after lap—perfect for serious racers looking for reliability and precision. 🔧 Features:✅ 68mm CVA driveshaft bones for front/center position✅ Designed for optimized durability and power delivery✅ Precision machined for smooth, consistent operation✅ Ideal for high-performance race setups 📦 Includes:• (2) 68mm CVA Driveshaft Bones 🚗 Compatibility:• Losi 22S Sprint• Losi 22X• Losi 22X-4• Losi 22X-4 Elite Dominate the track with smoother handling and added strength—this is a must-have upgrade for your Losi race platform!

Read more less

Reedy Zappers SG6 4800mAh 135C 7.6V 2S Shorty HV-LiPo – Maximum Power & Consistency! Upgrade your racing setup with the Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo, engineered with state-of-the-art LiPo chemistry to deliver unmatched power, reliability, and cycle life. Designed for elite on-road and off-road competition, the SG6 series enhances power output, lowers internal resistance, and increases durability, ensuring consistent voltage and high performance from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Delivers higher voltage, lower IR, and improved power output.✅ Updated Formulation & Construction – Increases efficiency, reliability, and durability.✅ Heavy-Duty Internal Structure – Designed for high-discharge applications in intense racing conditions.✅ High Capacity (4800mAh) with 135C Discharge Rate – Provides maximum power output and runtime.✅ Inherently Flat Discharge Curve – Maintains higher voltage deeper into the race for consistent power delivery.✅ Durable Hard Case with Low-Resistance Connectors – Prevents damage while minimizing power loss.✅ ROAR & BRCA Approved – Legal for competition use in sanctioned events. Next-Level Performance for Serious Racers! 🏁 Why Choose the Reedy Zappers SG6? 7.6V (HV-LiPo) design allows charging up to 4.35V/cell for maximum performance. Higher voltage retention throughout the race results in stronger acceleration and top-end speed. Ideal for both on-road & off-road applications, including 1/8 eBuggy and 1/10 racing. Proven reliability & extended cycle life for long-lasting, race-winning performance. 🔥 Power your RC car with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4800mAh Voltage: 7.6V (2S) Max Charge Rate: 9.6A Discharge Rate: 135C Dimensions: 96mm x 47mm x 25.1mm Weight: 207g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4800mAh 135C Shorty is the go-to choice for serious racers, offering high voltage, low resistance, and superior durability. Whether you need explosive acceleration, extended run time, or consistent power delivery, this battery is engineered to give you the winning edge. 🔥 Upgrade your setup today and experience next-level performance with Reedy Zappers SG6! 🏁💨

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Team Associated Rear Suspension Arms, Hard: RC10B74   ASC92131

Read more less

Team Associated RC10B7 Gear Differential Case and Cross Pins – Genuine Replacement Set 🔧 Keep your drivetrain running smooth with the Team Associated RC10B7 Gear Differential Case and Cross Pins. Designed specifically for the RC10B7 platform, this factory replacement ensures durability, precise fitment, and optimal performance during high-stress racing conditions. 🔧 Key Features: ✅ Direct replacement for worn or damaged diff internals✅ Precision-molded gear diff case for reliable operation✅ Includes cross pins for proper gear alignment✅ Maintains stock performance and reliability 📦 Includes: (1) Gear Differential Case (4) Cross Pins ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Stay race-ready.Restore your buggy's performance with this genuine RC10B7 differential case and cross pin set from Team Associated. 🏁  

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

1up Racing CF Look Chassis Skin – AE RC10B7/B7D Protect your chassis and upgrade your style with the 1up Racing CF Look Chassis Skin for the Team Associated RC10B7 and B7D! Designed for long-lasting durability and a sleek carbon fiber appearance, this heavy-duty vinyl skin not only shields your chassis from wear and tear but also helps protect the track surface. Built with extremely tacky adhesive, this reusable skin can be peeled and re-applied up to 7-8 times, making it one of the most durable and versatile chassis skins available. Key Features: ✅ Premium Carbon Fiber Look – Gives your chassis a trick, high-performance appearance with bold 1up Racing logos.✅ Heavy-Duty Vinyl Construction – Resists wear and abrasion, ensuring long-lasting protection.✅ Ultra-Tacky Reusable Adhesive – Peel and re-apply up to 7-8 times without losing grip.✅ Precision Cut for RC10B7/B7D Fitment – Provides a perfect fit with easy access to essential screws.✅ Includes Flaps for Servo Screw Access – Allows for quick and easy maintenance.✅ Separate Tailpiece Section – Full access to rear screws for effortless servicing.✅ Bonus: Two Extra Tailpiece Sections Included! – Reinforce the most wear-prone area for extended use.✅ Two Logo Options Available! – Customize your style with your preferred 1up Racing logo design. Designed for Performance & Durability! 🏁 Protects Your Chassis & Track Surface: Prevents scratches and wear from abrasive surfaces and debris. Maintains the integrity of your chassis without adding extra weight. 🔩 Built for Easy Maintenance: Custom-cut flaps allow access to servo screws without removal. Removable tailpiece section makes rear-end servicing quick and hassle-free. 🔥 Race in style while keeping your chassis in top shape with 1up Racing CF Look Chassis Skin! In the Box: (1) 1up Racing CF Look Chassis Skin for AE RC10B7/B7D (2) Extra Tailpiece Sections Upgrade Your Chassis Protection Today! Don’t settle for generic skins—choose the best-looking, most durable chassis skin on the market. With reusable adhesive, precision fitment, and bold carbon fiber styling, the 1up Racing CF Look Chassis Skin is a must-have for serious racers. 🔥 Pick 1up for your car and experience premium protection with unbeatable style! 🏁💨  

Read more less

Pro-Line Air Force 2 HD Pre-Cut 1/10 Buggy Wings (7") – PRO6405-17🏁 Track-Tested. Pre-Cut. Race-Ready. Dominate the competition with Pro-Line's Air Force 2 HD Wings—engineered for peak performance and built for battle. These 7" wide pre-cut Lexan wings are designed using advanced CAD technology for maximum durability and aerodynamic efficiency. The curved corners reduce cracking and improve airflow, while the extra tire clearance keeps you fast through the corners. ✅ Fits most 1/10 scale buggies✅ 7" wide for balanced downforce✅ Pre-cut for quick installation✅ Made from durable medium-thickness Lexan✅ Crystal clear and paint-ready✅ Made in the USA 🇺🇸 📦 Includes:(2) Pre-Cut Air Force 2 HD Buggy Wings (7") 💡 Pro Tip: Pair with your favorite paint job and dial in your aero for serious race day results.

Read more less

Team Associated RC10B7 Factory Team Caster & Steering Blocks (Carbon) – Race-Ready Precision Upgrade! 🔥 Upgrade your buggy’s front-end handling with the Team Associated RC10B7 Factory Team Carbon Caster & Steering Blocks. Engineered for high-performance racing, this optional carbon component set delivers increased stiffness and responsiveness for sharper, more consistent steering on the track. 🔧 Key Features: ✅ Constructed from lightweight carbon material for reduced flex✅ Increased steering precision and control✅ Designed for high-grip track conditions✅ Direct fit for RC10B7 and RC10B7D buggies✅ Factory Team performance for serious racers 📦 Includes: (3) Pairs of Steering Blocks (Carbon) (1) Pair of Caster Blocks (Carbon) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Dial in your steering response.Experience the edge of carbon with this Factory Team block set — essential for serious racers chasing consistency and control. 🏎️💥

Read more less

Team Associated RC10B7 Factory Team Carbon Top Plate & Ballstud Mount Set – Eliminate Flex, Maximize Control! 🏁 Upgrade your chassis stiffness and tuning precision with the Factory Team Carbon Top Plate & Ballstud Mount Set for the RC10B7 and RC10B7D. Constructed from Team Associated’s renowned carbon composite material, this lightweight set reduces unwanted flex on high-bite tracks while improving steering consistency and front-end response. ⚙️ Key Features: ✅ Premium carbon composite construction for lightweight durability✅ Reduces chassis flex for consistent handling on high-traction surfaces✅ Improves steering precision and chassis response✅ Perfect for racers looking to fine-tune front-end stiffness✅ Genuine Team Associated Factory Team option part 📦 Includes: (1) Carbon Top Plate (1) Carbon Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🔥 Dial in your front-end tuning with this high-performance Factory Team upgrade from Team Associated! 🏆🔧

Read more less

Reedy Blackbox 610R 2S Competition ESC w/ PROgrammer2 – Next-Level Performance & Precision! Take your RC racing performance to the next level with the Reedy Blackbox 610R 2S Competition ESC, designed for elite-level throttle response, braking precision, and customizable tuning options. Building on the success of the Blackbox 510R, the 610R features updated 32-bit hardware for crisper throttle feel, smoother braking, and enhanced tuning flexibility. Whether you're running stock or modified 1/10 applications, this ESC delivers race-winning control and power. Paired with the included Blackbox PROgrammer2, racers can unlock advanced settings, monitor battery health, and update firmware, making it the ultimate tool for fine-tuning your setup. Key Features: ✅ CNC-Machined Black Aluminum Case w/ Integrated Heat Sink – Provides superior cooling and durability.✅ 32-Bit Microcontroller Unit (MCU) – Ensures precise throttle and brake control with ultra-smooth response.✅ Fully Adjustable Brake, Throttle, Power & Safety Functions – Fine-tune your setup for maximum performance.✅ Blinky Mode with ROAR-Approved Software – Legal for stock class racing.✅ Ultra-Low Resistance FET Board – Delivers efficient power delivery and minimal heat buildup.✅ On-Board Power Button – Convenient and reliable operation.✅ Solder Tabs with 13-Gauge Power Wires – Ensures high current flow for optimal efficiency.✅ Pro External Capacitor Board – Improves voltage stability and consistency.✅ RPM & ESC Temp Data Logging – Monitor real-time performance with the Blackbox PROgrammer2.✅ Firmware Updateable – Stay ahead of the competition with upgradable software. Blackbox PROgrammer2 – Unlock Full Tuning Potential! With the included PROgrammer2, racers can adjust: 🔹 Brake Settings: Fine-tune brake strength, frequency, drag brake, and punch for the ultimate stopping power.🔹 Throttle Control: Adjust drive frequency, punch, initial throttle, current limits, and dead band for a dialed-in feel.🔹 Motor Power: Customize timing and boost settings for maximum speed and acceleration on large tracks.🔹 Miscellaneous Controls: Modify BEC voltage, low voltage cutoff, overheating protection, and reverse settings for the perfect race setup. 📌 Note: The Blackbox 610R requires the ASC27027 Programmer with firmware version EE460139 (included in this combo). Specifications: Voltage Input: 2S LiPo Suggested Applications: 1/10 Off-Road, 1/10 On-Road Resistance (Ohms): 0.00043 Continuous Current: 160A Dimensions: 38.5 x 36.9 x 19.5mm Motor Limit: 4.5T Weight (w/o Wires & Fan): 45g BEC (Adjustable): 6.0V - 7.4V / 5A Power Wires: 13-Gauge Silicone Cooling Fan: Optional In the Box: (1) Reedy Blackbox 610R 2S Competition ESC (1) Blackbox PROgrammer2 (1) External Capacitor Board (1) Instruction Manual Race-Proven Performance & Customization at Your Fingertips! Whether you're competing in stock or modified racing, the Reedy Blackbox 610R delivers incredible throttle precision, braking control, and power efficiency. With full tuning capabilities via the Blackbox PROgrammer2, you can tailor every aspect of your ESC to fit your driving style and track conditions. 🔥 Upgrade today and experience championship-winning control with the Reedy Blackbox 610R! 🏁💨  

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Dial in your suspension for ultimate precision with the Factory Team 13mm Shock Pistons. The #91931 pistons feature two 1.5mm holes, offering maximum damping for high-traction surfaces and rough tracks where control is key. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.5mm hole configuration 2.5mm thickness ⚙️ Key Features: Compatible with 13mm Team Associated shock bodies CNC-precision molding ensures consistency Smaller hole size for slower rebound and increased pack Ideal for high-bite or rough surface tracks Tuning option for front or rear shocks on RC10B6.4, RC10B74.  

Read more less

Upgrade your suspension precision with the Factory Team 13mm Shock Pistons from Team Associated. The #91932 piston set features two 1.6mm holes with a 2.5mm thickness, providing a stiffer pack than larger hole configurations—ideal for high-speed, high-traction conditions. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.6mm holes 2.5mm thick profile ⚙️ Key Features: Designed for 13mm shock bodies Precision-molded for consistency and smooth operation Offers increased damping over 2x1.7 and 2x1.8 setups Used by top racers for fine-tuning on rough or fast tracks Fits platforms like RC10B6.4, RC10B74.2, and more 📌 Tuning Note: Smaller holes = more pack. Great for front shocks when you want the car to stay flatter in transitions or landings.

Read more less

Fine-tune your rear suspension geometry with the RC10B74 Rear Hub Insert Set from Team Associated. These precision-molded inserts allow you to customize hub adjustments for optimized handling on a variety of track surfaces. 🔧 Key Features: Factory Team precision for pro-level tuning Multiple offset options for customized camber and toe settings High-quality molded composite for durability Direct fit for RC10B74 rear hubs Ideal for racers seeking performance edge 📦 Includes: (1) Set of Rear Hub Inserts (multiple offsets) ✅ Compatibility: Team Associated RC10B74 May fit other models in the B74 lineup (check manual for fitment) Whether you're tuning for more cornering grip or better straight-line stability, this insert set gives you the flexibility you need to dial in your setup.

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

Upgrade your rear-end setup with precision and strength! This wide gull-wing carbon fiber rear shock tower is designed to optimize shock positioning for increased stability and rear traction, especially in high-bite track conditions. A direct replacement part for B6.3 and B6.3D platforms, it’s lightweight, ultra-durable, and race-proven. ✅ Key Features: High-quality carbon fiber construction for superior strength and reduced flex Wide gull-wing geometry enhances suspension performance and tuning range Lightweight upgrade with professional-level reliability Direct replacement with factory fit and finish 📦 Includes: (1) Carbon Fiber Wide Gull-Wing Rear Shock Tower 🔧 Compatibility: Team Associated RC10B6.3 Team Associated RC10B6.3D Pair it with the front gull-wing tower (#91880) for maximum performance and chassis balance.

Read more less

Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Team Associated RC10B7 Rear Anti-Roll Sway Bars (5) [92458] 🌀 Keep It Tight in the Turns!Fine-tune your cornering performance with the Team Associated RC10B7 Rear Anti-Roll Sway Bar Set. Whether you’re dialing in for grip or freeing up the rear, this 5-pack gives you options to match any track condition. Made specifically for the RC10B7 and B7D platforms, these bars are a must-have in any serious racer’s pit box. 🔧 Key Features:✅ Includes five different sway bar thicknesses🚗 Designed for the RC10B7 and B7D buggies🔄 Helps balance your setup for optimal rear-end control🏁 Swap in and tune for different track surfaces 📦 Includes:(5) Rear Anti-Roll Sway Bars 🔩 Part Number: 92458🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less