Exalt X-Rated 2S 130C 4400mAh LCG LiPo Battery (w/5mm Bullets) High Performance. Low Profile. Built for Drift & Racing. The Exalt X-Rated 4400mAh 2S LiPo is engineered for serious racers who demand both performance and reliability. Built with cutting-edge Silicon Graphene technology, this pack offers lower resistance, cooler operation, and a flatter discharge curve — perfect for intense drift sessions or on-road racing. Its low center of gravity design makes it ideal for tight chassis layouts where balance is key. ⚙️ Features: ✅ 130C Continuous / 260C Burst Discharge Rate ⚡ Silicon Graphene Technology for lower temps and extended cycle life 🔋 LCG (Low Center of Gravity) design – perfect for drift and optional shorty setups 🔌 5mm High-Amp Bullet Connectors for secure, high-current connection 🏎️ Designed for high-voltage, low-resistance performance 📐 Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Continuous Discharge: 130C Max Burst Discharge: 260C Weight: 167g ± Dimensions: 96 x 47 x 20mm (LxWxH) Connector Type: 5mm Bullet Style: LCG Shorty Pack (Optional Drift Layout) 💥 Perfect for 1/10 drift builds, touring cars, and racing buggies requiring a compact, low-profile battery solution.  

Read more less

1up Racing 7075 LowPro Wing Washers – Lock It Down with Low-Profile Precision 💥 Keep your wing tight and your style tighter with the 1up Racing 7075 LowPro Wing Washers – the go-to choice for elite racers and style-focused builders. Whether you're launching off-road or speeding down the straight, these precision-machined aluminum washers are built to perform and look incredible doing it. 💪 Designed with no cutouts to trap dirt and an oversized 14mm diameter to reduce wing flex, these washers boost rear-end stability and give your ride that unmistakable 1up edge. ✨ Key Features: 🔩 7075 High-Strength Aluminum – Lightweight and tough enough for brutal landings📏 Low-Profile Design – No cutouts = no dirt buildup🌀 14mm Outer Diameter – Minimizes wing flex for consistent aero performance🎨 Available in 10 Anodized Colors – With mirror-like chamfered edges for that clean, pro look💡 Drag Car Ready – Clean body mount solution with aerodynamic benefit 📦 What’s Included? ✔️ (2) 7075 LowPro Wing Washers in your chosen color Note: Use with standard M3 flat head screws (not included). Slight screw head protrusion helps preserve the anodized finish. 🏁 Stay Locked. Stay Clean. Stay Fast. Whether you're racing, bashing, or building to win, the 1up Racing LowPro Wing Washers deliver race-ready function and next-level style. 💡 Finish Your Build Right – Add 1up Wing Washers to Your Setup Today!

Read more less

Fine-tune the rear suspension of your RC10B6.3 with the Wide “C” Arm Mount from Team Associated. Made from high-quality aluminum for added strength and precision, this Factory Team upgrade delivers improved durability and consistent geometry for high-performance setups. 🔥 Key Features: Factory Team aluminum arm mount for increased rigidity Wide “C” mount geometry for specific rear pivot configurations CNC-machined for precise fit and performance Hard-anodized finish for wear resistance and professional look Perfect for racers needing a durable, race-ready upgrade ✅ Compatibility: RC10B6.3 RC10B6.3D Also fits other RC10B6-series vehicles using the wide C arm mount configuration 📦 Includes: (1) Aluminum Arm Mount C (Wide) ⚠️ Tip:Pair with the correct A/B/D mounts to achieve your desired anti-squat and toe-in settings.

Read more less

Team Associated RC10B6.2 Rear Suspension Arm, 73mm   ASC91853

Read more less

Team Associated RC10B6.2 Factory Team Carbon 75mm Rear Suspension Arms [91874] 💪 Lightweight. 💨 Rigid. 🏁 Race-Proven. Upgrade your RC10B6.2 with the Factory Team Carbon 75mm Rear Suspension Arms—built for racers who demand precision, strength, and speed. Crafted from ultra-rigid carbon material, these arms deliver sharper handling, improved durability, and better stability in high-traction conditions. ✅ 12% lighter than standard "hard" arms✅ Stronger and more durable than previous options✅ Improves high-speed stability and cornering control✅ Ideal for high-traction tracks✅ Direct Factory Team fit and finish Includes:(2) Carbon 75mm Rear Suspension ArmsPlastic Shims 📦 Part Number: 91874🔧 Brand: Team Associated🏎️ Compatible with: RC10B6.2

Read more less

Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

  Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts (2pcs) Durability Meets Precision. Upgrade your suspension with Team Associated’s V2 3x27.5mm Ti-Nitride Shock Shafts, engineered for ultra-smooth performance and long-lasting wear resistance. These shafts feature a screw-mount piston design—perfect for racers who demand consistency and reliability lap after lap. Compatible with specific buggy and truck shock bodies, these are a direct fit for serious performance upgrades. 🔩 Features: ✨ Ti-Nitride Coated – Hard coating increases wear resistance and reduces friction 🔧 Screw-Mount Design – Stronger and more secure piston mounting (no E-clips) 🚗 Vehicle Compatibility: Fits ASC91577 Buggy Rear Shock Bodies Fits ASC91578 Truck Front Shock Bodies ⚠️ Note: Not compatible with E-clip style pistons 📦 Includes: (2) 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts Trust Team Associated components for reliable performance and race-ready precision.

Read more less

1up Racing 7075 Aluminum Flanged Locknuts – M3 Upgrade your RC build with 1up Racing 7075 Aluminum Flanged Locknuts, engineered for maximum durability, lightweight performance, and striking aesthetics. Inspired by the smooth lines of the SoCal Hot Rod scene, these locknuts feature mirror-like chamfer details, a floating hex for optimal wrench engagement, and an oversized 11mm serrated flange for unbeatable security. Precision CNC-machined from premium 7075 aluminum, these locknuts deliver exceptional strength and longevity while keeping weight to a minimum. Available in 10 bold anodized colors, they add the perfect finishing touch to any setup. Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Superior bite and maximum security for worry-free racing.✅ Oversized 11mm O.D. Flange – Enhances grip and stability, preventing wheel slippage.✅ Low-Profile Design – Keeps weight low and ensures a clean, streamlined look.✅ Floating Hex Design – Optimal wrench engagement for easy, secure installation.✅ 7mm Outer Hex & M4x0.7mm Threads – Standard fitment for hassle-free compatibility.✅ Mirror-Like Chamfered Edges – Glistens under light, giving your ride an unmistakable premium touch.✅ Available in 10 Bold Anodized Colors – Customize your RC with a style that stands out. In the Box: (4) 1up Racing 7075 Aluminum Flanged Locknuts – M3 Precision, Performance & Style! Don’t settle for ordinary—elevate your RC with 1up Racing’s lightest and most colorful flanged locknuts. With race-proven performance, premium materials, and unmatched style, these locknuts are the perfect finishing touch for any build. 🔥 Order today and 1up your ride! 🏁💨

Read more less

🔧 Premium V2 Screw-Mount Front Shock ShaftsUpgrade your buggy's performance and durability with these Ti-Nitride coated 3x21mm shock shafts—built for smooth suspension action and long life! 💡 Key Features: Ti-Nitride coating reduces wear and improves shock performance Screw-mounted design keeps pistons secure NOT compatible with E-clip pistons 🔩 Includes:(2) Front Shock Shafts – 3x21mm ✅ Compatibility:Use with ASC91576 V2 shock bodies  

Read more less

  Push your racing to the limit with the ProTek RC 2S 130C Shorty LiPo—engineered with Si-Graphene+ HV technology for insane power delivery and ultra-low internal resistance. Perfect for stock and mod classes, this 7.6V 5000mAh shorty pack offers lightning-fast response and consistency lap after lap. 🔋 Features: 2S HV LiPo rated at 7.6V for higher voltage punch Massive 130C burst and low internal resistance for peak performance Silicon-Graphene+ chemistry for superior cycle life and thermal stability Lightweight shorty case for optimal weight distribution 5mm bullet connectors for high-current flow ROAR Approved for sanctioned competition 📦 Includes: (1) 5000mAh 2S 7.6V HV LiPo Shorty Battery (1) 5mm to 4mm bullet adapter set Specs: Capacity: 5000mAh Voltage: 7.6V (2S HV) C-Rate: 130C Dimensions: 96x47x25mm Weight: Approx. 219g Connector Type: 5mm bullet Whether you're racing onroad or offroad, stock or modified—this ProTek pack delivers the edge you need to win.

Read more less

Avid Moon Style Aluminum HV High Speed Cooling Fan (30mm x 30mm) – Black w/Silver Chamfer High Voltage | High RPM | Lightweight Aluminum Housing Keep your electronics cool and stylish with the Avid Moon Style 30mm Cooling Fan. Designed for high-performance RC setups, this fan features a sleek anodized black aluminum case with silver chamfered edges and delivers powerful airflow at up to 28,000 RPM. Compatible with 5.0V to 8.4V systems. ⚙️ Features: 🌬️ 28,000 RPM Performance – Excellent cooling for ESCs and motors 🧊 Machined Aluminum Case – Durable and efficient heat dissipation ⚡ High Voltage Capable – Operates from 5.0V up to 8.4V 🖤 Anodized Black Finish – With sharp silver chamfer styling 🔧 30x30x10mm Size – Standard size for a variety of mounting applications 🙃 Pro Tip: Peel off the sticker for a cleaner look! 📦 Specifications: Operating Voltage: 5.0–8.4V RPM: 28,000 Current Draw @ 8.4V: 0.6A Dimensions: 30mm x 30mm x 10mm Case Material: Black anodized aluminum w/ silver chamfers Fan Blade Material: Plastic 🧩 A perfect mix of style, strength

Read more less

Team Exalt X-Rated 2S LiPo Battery (4400mAh/150C)📦 Part #: EXA3201 Dominate the track with the Team Exalt X-Rated 4400mAh 2S LiPo – engineered with next-gen chemistry for racers who demand maximum voltage, minimum resistance, and race-winning consistency. Whether you're running stock or mod, this pack delivers explosive acceleration and sustained punch all the way to the finish. ⚡ X-Rated Series Performance Highlights: 150C Continuous / 300C Burst Discharge Rate Silicon Graphene Technology for increased efficiency and lifespan Flat Discharge Curve means less sag, more power throughout your run Low Internal Resistance and cooler operating temps 5mm High-Amp Bullet Connectors for maximum current delivery ROAR Approval Pending 📊 Battery Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Discharge Rate: 150C Burst Rate: 300C Weight: 220g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're chasing podiums or pushing for personal bests, the EXA3201 X-Rated LiPo gives you the edge in acceleration, efficiency, and endurance.

Read more less

Fine-tune your buggy’s balance and handling with the Team Associated Steel Servo Chassis Weight, designed specifically for the RC10B6 and B6D platforms. Weighing in at 24 grams, this precision steel weight mounts securely under the servo to help lower the center of gravity and improve front-end stability — perfect for high-grip surfaces or drivers looking for a more planted feel. Constructed from high-quality steel, this tuning upgrade helps smooth steering response and adds consistency through corners without compromising agility. Installation is quick and easy using the included mounting screws. ⚙️ Features: Adds 24 grams of weight to optimize front-to-rear balance Lowers center of gravity for improved handling and steering feel Precision fit for Team Associated B6 and B6D buggies Ideal for high-traction tracks and fine-tuning race setups Made from durable steel for long-lasting performance Includes mounting hardware for easy installation 📏 Specifications: Part Number: 91747 Material: Steel Weight: 24g Vehicle Compatibility: Team Associated RC10B6 / B6D 📦 Includes: (1) 24g Steel Servo Chassis Weight (2) Mounting Screws 💡 Pro Tip:Combine this servo weight with a rear ballast plate or brass front bulkhead for the ultimate balance adjustment — helping you dial in your buggy to match any track condition.

Read more less

  Take your carpet and turf racing to the next level with the JConcepts Pin Swag 2.2" 2WD Slim Front Tires, engineered for razor-sharp steering and consistent forward bite. These innovative tires combine the proven outer lugs of the Swagger with a dense array of precision pins to deliver unmatched control, stability, and wear balance on today’s high-traction tracks. The unique “Pin + Swag” hybrid tread pattern features a split-center design for flexible surface adaptation and a staggered section that transitions power smoothly through corners. With a low-profile carcass for responsive handling and scalloped tire beads to cut weight, these front tires are the go-to choice for serious 1/10 racers seeking precision steering on high-grip carpet or turf. ⚙️ Features: JConcepts original Pin + Swag hybrid tread design for optimal front-end grip and balance Low-profile carcass layout improves stability and cornering precision Split-center pattern enhances surface conformity and steering smoothness Hefty base pins with sharp edges maximize bite and minimize wear Dense tread layout for even contact and consistent performance Ultra-light scalloped tire beads reduce rotating mass Ideal for EOS-style carpet and astro/turf tracks Pink compound optimized for high-traction racing 📏 Specifications: Part Number: 3181-010 Scale: 1/10 Position: Front (2WD Buggy) Compound: Pink (Carpet/Turf) Wheel Diameter: 2.2" Quantity: 2 Tires 📦 Includes: (2) JConcepts Pin Swag 2.2" 2WD Slim Front Tires  

Read more less

Upgrade or replace with precision using the Team Associated RC10B6.4 Front Bulkhead Set, featuring both 0° and 2.5° kick-up options. This set is a direct replacement for the B6.4 front bulkhead and offers adjustability to fine-tune your front-end geometry depending on track conditions and driving style. 📦 Includes: (1) 0° Front Bulkhead (1) 2.5° Front Bulkhead 📌 Compatibility: Team Associated RC10B6.4 RC10B6.4D May also be compatible with other B6 series models with slight adjustments 🔧 Key Benefits: Multiple kick-up angles for tuning front-end response High-quality composite material for durability Factory Team precision fitment and finish Ideal for racers looking to customize handling feel on entry and through corners. Keep both angles on hand and swap as needed to match the track!

Read more less

These replacement front suspension arms are designed specifically for the Team Associated RC10B7 1/10 scale buggy. Built for strength and precision, they help maintain proper geometry and smooth suspension movement for peak performance on the track. ✅ Includes:• (2) Front Suspension Arms📦 Part Number: 92410🔧 Compatibility: RC10B7

Read more less

  Keep your transmission running smooth with this genuine TLR 22 4.0 laydown idler gear and shaft set. Designed specifically for the laydown transmission setup, this replacement set includes everything needed to restore drivetrain performance. ✅ Includes:• (2) Idler Gears• (1) Idler Shaft ✅ Compatible with: TLR 22 4.0 Laydown Transmission✅ OEM replacement for precise fit and function✅ Built tough for high-performance racing Essential for keeping your TLR 22 4.0 dialed in and track-ready.

Read more less

Reedy Zappers SG6 4800mAh 135C 7.6V 2S Shorty HV-LiPo – Maximum Power & Consistency! Upgrade your racing setup with the Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo, engineered with state-of-the-art LiPo chemistry to deliver unmatched power, reliability, and cycle life. Designed for elite on-road and off-road competition, the SG6 series enhances power output, lowers internal resistance, and increases durability, ensuring consistent voltage and high performance from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Delivers higher voltage, lower IR, and improved power output.✅ Updated Formulation & Construction – Increases efficiency, reliability, and durability.✅ Heavy-Duty Internal Structure – Designed for high-discharge applications in intense racing conditions.✅ High Capacity (4800mAh) with 135C Discharge Rate – Provides maximum power output and runtime.✅ Inherently Flat Discharge Curve – Maintains higher voltage deeper into the race for consistent power delivery.✅ Durable Hard Case with Low-Resistance Connectors – Prevents damage while minimizing power loss.✅ ROAR & BRCA Approved – Legal for competition use in sanctioned events. Next-Level Performance for Serious Racers! 🏁 Why Choose the Reedy Zappers SG6? 7.6V (HV-LiPo) design allows charging up to 4.35V/cell for maximum performance. Higher voltage retention throughout the race results in stronger acceleration and top-end speed. Ideal for both on-road & off-road applications, including 1/8 eBuggy and 1/10 racing. Proven reliability & extended cycle life for long-lasting, race-winning performance. 🔥 Power your RC car with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4800mAh Voltage: 7.6V (2S) Max Charge Rate: 9.6A Discharge Rate: 135C Dimensions: 96mm x 47mm x 25.1mm Weight: 207g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4800mAh 135C Shorty is the go-to choice for serious racers, offering high voltage, low resistance, and superior durability. Whether you need explosive acceleration, extended run time, or consistent power delivery, this battery is engineered to give you the winning edge. 🔥 Upgrade your setup today and experience next-level performance with Reedy Zappers SG6! 🏁💨

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less

Team Associated RC10B7 Front Anti-Roll Sway Bars (5) [92459] 🌀 Precision in the Front, Grip in the Back!Upgrade your front-end handling with the Team Associated RC10B7 Front Anti-Roll Sway Bar Set. Whether you're fighting traction roll or just fine-tuning your buggy for max consistency, this 5-pack of sway bars gives you the tuning range you need to dominate any surface. Built for the RC10B7 and B7D platforms—just swap, test, and race! 🔧 Key Features:✅ Five sway bar options for ultimate front-end tuning🔄 Designed specifically for RC10B7 and B7D🎯 Helps maintain front grip and stability through corners🏁 Race-proven setup flexibility 📦 Includes:(5) Front Anti-Roll Sway Bars 🔩 Part Number: 92459🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Rear Anti-Roll Sway Bars (5) [92458] 🌀 Keep It Tight in the Turns!Fine-tune your cornering performance with the Team Associated RC10B7 Rear Anti-Roll Sway Bar Set. Whether you’re dialing in for grip or freeing up the rear, this 5-pack gives you options to match any track condition. Made specifically for the RC10B7 and B7D platforms, these bars are a must-have in any serious racer’s pit box. 🔧 Key Features:✅ Includes five different sway bar thicknesses🚗 Designed for the RC10B7 and B7D buggies🔄 Helps balance your setup for optimal rear-end control🏁 Swap in and tune for different track surfaces 📦 Includes:(5) Rear Anti-Roll Sway Bars 🔩 Part Number: 92458🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

Unleash race-winning control and consistency with the JConcepts 3DP 2.2" Pre-Mounted Carpet Tires — engineered for elite racers demanding precision and long-lasting performance on high-grip carpet tracks. Designed and tested in the USA, the 3DP tire represents the latest generation of JConcepts’ carpet racing technology, building on the success of the Fuzz Bite and 3D series. The super-stacked pin layout with reverse “water tower” pins delivers incredible forward bite and consistent wear, while the low-profile carcass keeps steering crisp and the buggy planted through corners. Mounted on lightweight JConcepts Mono wheels, these tires are pre-glued, balanced, and ready for immediate track use — a must-have upgrade for serious racers looking to dominate on EOS-style and CRC carpet surfaces. ⚙️ Features: Pre-mounted on JConcepts Mono 12mm hex wheels (White or Yellow options) Low-profile carcass ensures stable cornering and direct steering response Super-stacked pin layout provides maximum traction and controlled wear Reverse “water tower” pin design enhances forward grip and durability Cut & sliced outer bars improve flexibility and edge control in tight sections Open outer pin spacing helps clear debris while maintaining traction Radial ribs along the sidewall deliver smooth, predictable handling Scalloped tire beads reduce rotating mass for quicker acceleration Pink compound tuned specifically for high-traction carpet performance 📏 Specifications: Part Numbers: 4174-101011 (White) / 4174-201011 (Yellow) Scale: 1/10 Position: Front (2WD Buggy) Compound: Pink (Carpet) Wheel Diameter: 2.2" Wheel Hex: 12mm Surface: Carpet / Turf Quantity: 2 Pre-Mounted Tires 📦 Includes: (2) JConcepts 3DP 2.2" 2WD Front Buggy Carpet Pre-Mounted Tires Mounted on (2) JConcepts Mono 12mm Hex Wheels (White or Yellow)  

Read more less

Compatible with iCharger, iSDT, and SkyRC Chargers Overview:The TQ Wire XT60 2S Charge Cable delivers the perfect balance of premium materials, versatile connectivity, and durability. Designed for serious RC racers and hobbyists, this lead makes charging your 2S LiPo batteries easier, cleaner, and more reliable—whether you’re in the pit or at the track. About the XT60 2S Charge Cable Built for Performance and DurabilityFeaturing dual-size stepped bullets (4mm & 5mm), this cable ensures compatibility with a wide range of LiPo batteries. The 2-foot cable uses 12-gauge high-strand silicone wire wrapped in protective black nylon mesh, giving you maximum current flow and long-lasting flexibility. The XT60 connector provides a secure, low-resistance connection to your charger, compatible with popular models such as the Junsi X6 iCharger, iSDT, and SkyRC B6, as well as other chargers that use an XT60 output. Premium Design FeaturesTQ Wire went the extra mile with a molded strain relief housing around the bullet connectors and balance port, ensuring a stronger connection and minimizing wire fatigue. Integrated “grippers” make it easy to remove the bullets from your battery safely and efficiently—no more struggling with tight fits or risking wire damage. Features: XT60 connector for charger connection (iCharger/iSDT compatible) 4mm & 5mm stepped bullets fit most 2S LiPo packs Durable molded strain relief for long life and safety Integrated “grippers” for easy battery removal Heavy-duty 12-gauge silicone wire for efficient power transfer Wrapped in black nylon mesh for protection and clean looks 2-foot length provides ample reach without clutter Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT60 Battery Connectors 4mm & 5mm Stepped Bullets Balance Port XH Compatibility Junsi X6 iCharger, SkyRC B6, iSDT, and any XT60-output charger Includes: (1) TQ Wire 2S XT60 Charge Cable with 4mm/5mm Bullets Note:TQ Wire also offers a version with low-profile 90° tubes instead of the XT60 connector for alternative setups.

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Factory Team Carbon Top Plate & Ballstud Mount Set – Eliminate Flex, Maximize Control! 🏁 Upgrade your chassis stiffness and tuning precision with the Factory Team Carbon Top Plate & Ballstud Mount Set for the RC10B7 and RC10B7D. Constructed from Team Associated’s renowned carbon composite material, this lightweight set reduces unwanted flex on high-bite tracks while improving steering consistency and front-end response. ⚙️ Key Features: ✅ Premium carbon composite construction for lightweight durability✅ Reduces chassis flex for consistent handling on high-traction surfaces✅ Improves steering precision and chassis response✅ Perfect for racers looking to fine-tune front-end stiffness✅ Genuine Team Associated Factory Team option part 📦 Includes: (1) Carbon Top Plate (1) Carbon Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🔥 Dial in your front-end tuning with this high-performance Factory Team upgrade from Team Associated! 🏆🔧

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/5000mAh) – 140C Burst Unleash the Voltage – Dominate the Track The Gens Ace Redline 2.0 LiHV Shorty Battery is built for serious RC racers looking for explosive acceleration, sustained voltage, and consistent performance. Featuring ultra-low internal resistance and a massive 140C discharge rating, this lightweight pack delivers big power in a compact footprint — perfect for 1/10 scale racing applications. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power for competitive racing 🔋 7.6V 2S LiHV / 5000mAh Capacity – extended runtime with high-voltage punch 🔌 5mm Bullet Connectors – secure, high-amp power delivery 📏 Shorty LCG design – low-profile for improved chassis balance and handling ✅ Factory-matched cells for consistency and efficiency 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 5000mAh Continuous Discharge: 140C Max Charge Rate: 1C (5.3A) Configuration: 2S1P Watt Hours: 38Wh Connector Type: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 46 x 19mm Weight: 177g (6.24oz) 🏁 Whether you're battling it out on high-traction carpet or slick dirt tracks, the Gens Ace Redline 2.0 Shorty brings unmatched burst and endurance to your race day setup.

Read more less

Reedy Blackbox 610R 2S Competition ESC w/ PROgrammer2 – Next-Level Performance & Precision! Take your RC racing performance to the next level with the Reedy Blackbox 610R 2S Competition ESC, designed for elite-level throttle response, braking precision, and customizable tuning options. Building on the success of the Blackbox 510R, the 610R features updated 32-bit hardware for crisper throttle feel, smoother braking, and enhanced tuning flexibility. Whether you're running stock or modified 1/10 applications, this ESC delivers race-winning control and power. Paired with the included Blackbox PROgrammer2, racers can unlock advanced settings, monitor battery health, and update firmware, making it the ultimate tool for fine-tuning your setup. Key Features: ✅ CNC-Machined Black Aluminum Case w/ Integrated Heat Sink – Provides superior cooling and durability.✅ 32-Bit Microcontroller Unit (MCU) – Ensures precise throttle and brake control with ultra-smooth response.✅ Fully Adjustable Brake, Throttle, Power & Safety Functions – Fine-tune your setup for maximum performance.✅ Blinky Mode with ROAR-Approved Software – Legal for stock class racing.✅ Ultra-Low Resistance FET Board – Delivers efficient power delivery and minimal heat buildup.✅ On-Board Power Button – Convenient and reliable operation.✅ Solder Tabs with 13-Gauge Power Wires – Ensures high current flow for optimal efficiency.✅ Pro External Capacitor Board – Improves voltage stability and consistency.✅ RPM & ESC Temp Data Logging – Monitor real-time performance with the Blackbox PROgrammer2.✅ Firmware Updateable – Stay ahead of the competition with upgradable software. Blackbox PROgrammer2 – Unlock Full Tuning Potential! With the included PROgrammer2, racers can adjust: 🔹 Brake Settings: Fine-tune brake strength, frequency, drag brake, and punch for the ultimate stopping power.🔹 Throttle Control: Adjust drive frequency, punch, initial throttle, current limits, and dead band for a dialed-in feel.🔹 Motor Power: Customize timing and boost settings for maximum speed and acceleration on large tracks.🔹 Miscellaneous Controls: Modify BEC voltage, low voltage cutoff, overheating protection, and reverse settings for the perfect race setup. 📌 Note: The Blackbox 610R requires the ASC27027 Programmer with firmware version EE460139 (included in this combo). Specifications: Voltage Input: 2S LiPo Suggested Applications: 1/10 Off-Road, 1/10 On-Road Resistance (Ohms): 0.00043 Continuous Current: 160A Dimensions: 38.5 x 36.9 x 19.5mm Motor Limit: 4.5T Weight (w/o Wires & Fan): 45g BEC (Adjustable): 6.0V - 7.4V / 5A Power Wires: 13-Gauge Silicone Cooling Fan: Optional In the Box: (1) Reedy Blackbox 610R 2S Competition ESC (1) Blackbox PROgrammer2 (1) External Capacitor Board (1) Instruction Manual Race-Proven Performance & Customization at Your Fingertips! Whether you're competing in stock or modified racing, the Reedy Blackbox 610R delivers incredible throttle precision, braking control, and power efficiency. With full tuning capabilities via the Blackbox PROgrammer2, you can tailor every aspect of your ESC to fit your driving style and track conditions. 🔥 Upgrade today and experience championship-winning control with the Reedy Blackbox 610R! 🏁💨  

Read more less

The Team Associated Reedy Power Servo Wire Extension Leads are the perfect solution for clean and reliable wiring in your RC build. Whether you’re routing around a large chassis or need extra length to reach your ESC or receiver, these premium extensions ensure a secure and low-resistance connection every time. Available in three convenient lengths (100mm, 150mm, and 200mm), they make it easy to achieve a tidy, professional-grade layout while maintaining top-level electrical performance. ⚙️ Features: Ideal for extending servo or ESC leads in any RC application High-quality, flexible wire for smooth routing and durability Cleanly connects servo to speed controller with minimal resistance Available in multiple lengths for the perfect fit in any setup Factory-terminated with precision connectors for plug-and-play use 📏 Specifications: Part Numbers: 100mm (3.93") — 27143 150mm (5.90") — 27144 200mm (7.87") — 27145 Connector Type: Standard Servo Plug (JR-Style) Lengths Available: 100mm / 150mm / 200mm Wire Gauge: 26 AWG (Flexible silicone wire) Brand: Reedy Power (by Team Associated) 📦 Includes: (1) Servo Wire Extension Lead (Choose Length) 💡 Pro Tip:Use the shortest extension that fits your layout — shorter wires reduce electrical resistance and keep your build looking clean and efficient.  

Read more less

Refined torque. Tuned traction. Proven performance.The Team Associated RC10B7 3-Gear Gearbox Conversion Kit delivers a race-focused drivetrain upgrade that lets you fine-tune your buggy’s handling and power delivery. Designed for the RC10B7 and RC10B7D, and also compatible with T7 and SC7 platforms, this 3-gear layout alters torque transfer for a smoother, more balanced launch and enhanced rear-end stability. Perfect for racers chasing the edge on high-traction surfaces or looking to dial in rotation on tight tracks, the 3-gear conversion gives you the flexibility to tailor your drivetrain to your driving style. ⚙️ Features Performance-oriented 3-gear gearbox design Optimized torque response for improved traction and balance Includes notched differential height inserts for precise tuning Durable 54T idler gear with hardened idler shaft Factory-fit bearings and hardware for smooth installation CNC-machined aluminum arm mount (C) included Comprehensive kit with all mounting hardware and manual Designed for consistent durability and easy maintenance 📦 Includes (2) 3-Gear Gearbox Halves (4) Notched Differential Height Inserts (1) 54T Idler Gear (1) Idler Shaft (2) 10×15×4 mm Bearings (1) Aluminum Arm Mount (C) Full Hardware Set 3-Gear Conversion Manual ✅ Compatibility Team Associated RC10B7 / RC10B7D Team Associated T7 / SC7  

Read more less

  Achieve pro-level setup accuracy with the JConcepts Aluminum Ride Height Gauge. Machined from billet aluminum, this high-spec tool provides precise measurements from 10–40mm, making it a must-have for competitive off-road racers. With laser-etched markings, smooth pivoting action, and a secure thumbscrew lock, this gauge ensures your ride height adjustments are consistent and repeatable. 🔥 Key Features: Precision-machined from billet aluminum Available in Blue (JCO2282-1) or Black (JCO2282-2) anodizing Laser-etched graduated scale from 10mm–40mm Rounded boss touch point for accurate chassis contact Chamfered silver edging highlights the design Pre-assembled with 4mm pivot hardware & 3mm thumbscrew Includes a latched storage box with foam insert for protection ✅ Compatibility: Works with a wide variety of 1/10 and 1/8 scale on-road and off-road vehicles Ideal for buggies, trucks, and touring cars (TC6/TC7 series) Suitable for any chassis requiring precise ride height adjustments within 10–40mm 📦 Includes: (1) JConcepts Ride Height Gauge (choose Blue or Black) (1) Latched Storage Box with Foam Cushion ⚠️ Tip:Most racers prefer to set ride height with a slight gap (~0.5mm) between the chassis and gauge for best performance.

Read more less