Team Exalt Shorty LiPo Battery Storage Case (LCG)PART #: EXA4053 Keep your race-day power organized, protected, and ready to roll with the Team Exalt Shorty LiPo Battery Storage Case. Designed to hold up to five LCG shorty LiPo batteries, this lightweight, 3D-printed case is the perfect addition to any pit setup. Built from high-quality PLA, this compact and durable box keeps your batteries secure during storage and transport—without taking up unnecessary space. Whether you're heading to a local club race or a national event, this case helps you stay race-ready and clutter-free. Features: Holds five LCG shorty LiPo batteries 3D printed from durable PLA material Compact and lightweight—ideal for transport Precision-sized battery slots keep packs secure Easy to fit into your tool bag or pit box Includes: (1) Shorty LiPo Battery Storage Case (holds 5 batteries) Specifications: Material: PLA Outer Dimensions: 6.5 x 5 x 2 in (165.1 x 127 x 50.8 mm) Slot Dimensions: 3.8 x 1 x 1.6 in (96.5 x 25.4 x 40.6 mm) Note: This case is for storage and transport only. Not designed for charging or fire-safe containment.

Read more less

Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design

Read more less

Reedy 95mm Y-Connector (Black) – ASC27170Need to split a signal or power connection without cluttering your build? The Reedy 95mm Y-Connector offers a clean and efficient solution for a wide range of RC applications. Whether you're programming your ESC, running dual servos, or powering fans, this cable gets the job done. 🧩 Applications: 🔧 ESC Programming – Connect both fan and programmer when only one port is available 🛞 Dual Servo Setups – Run two servos from a single receiver channel ✈️ Aircraft Control Surfaces – Great for setups using dual servos for torque or redundancy 📏 Length: 95mm🎨 Color: Black🔌 Compatible with most standard RC connectors OEM Part #: ASC27170 Let me know if you want a version with variant colors, upsells, or if you're batching all Reedy wires and connectors into a collection!    

Read more less

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm) [71162] 🚀 Soak up the bumps. Stick the landing. These 13mm Front Shock Springs are built for serious performance on your T6.2 or SC6.2 when upgraded to 13mm shocks. With a 4.80 lb/in rate and 54mm length, they strike the perfect balance—soft enough for buttery-smooth cornering, firm enough to eat up big landings. Upgrade your front-end feel and dial in that confidence. 🔥 Features:✅ Blue rate: 4.80 lbs/in✅ Length: 54mm✅ Perfect for 13mm shocks✅ Great low-speed feel + high-speed support✅ Includes 2 springs 📦 Part Number: 71162🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring (Grey/2.55lbs) (72mm) [71165] 🛞 Smoother landings. Better cornering. Upgrade your suspension game with these 13mm Rear Shock Springs from Team Associated. Designed for the T6.2 and SC6.2 when equipped with 13mm shocks, these springs deliver a plush low-speed response while still offering the support you need for big jump landings. It’s the best of both worlds—smooth over the bumps, firm on the hits. 🔥 Features:✅ Grey rate: 2.55 lbs/in✅ Length: 72mm✅ Optimized for 13mm shocks✅ Delivers soft feel with firm pack✅ Includes 2 springs 📦 Part Number: 71165🏁 Brand: Team Associated

Read more less

1UP Racing Blue O-Ring Grease Lubricant (3g) – 1UP120301 Maximize performance and minimize friction with 1UP Racing Blue O-Ring Grease. This 3g container of high-performance lubricant is ideal for serious racers who demand smoother suspension and leak-free differentials. Designed to reduce sliding friction, it delivers ultra-smooth shock feel and long-lasting protection for diff o-rings and seals. Features: Smooths shock operation with reduced sliding friction Ideal for diff o-rings and seals to help prevent leaks Long-lasting formula for consistent performance Perfect for serious racers and RC enthusiasts Includes: (1) 3g Container of Blue O-Ring Grease  

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)      

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Fine-tune your front-end geometry with this Spindle Trail Insert Set from Team Losi Racing. Designed for precision handling adjustments, this set includes four of each: 2mm, 3mm, and 4mm inserts—perfect for dialing in the feel you want on the track. ✅ Includes:• (4) 2mm Inserts• (4) 3mm Inserts• (4) 4mm Inserts Compatible with select TLR 22-series models. A must-have for racers chasing the perfect setup!

Read more less

Team Associated RC10T6.4 Carbon Front Shock Tower (Gullwing Arm) [71157] 💥 Precision. Strength. Performance. Upgrade your RC10T6.4 with the Carbon Front Shock Tower, specifically designed for use with gullwing arms (ASC71138). Made from high-quality carbon fiber, this shock tower delivers the perfect blend of lightweight performance and ultra-durable strength—keeping your rig responsive and track-ready. 🔥 Features:✅ Precision-cut carbon fiber for maximum durability✅ Lightweight design improves handling and suspension response✅ Compatible with gullwing arms (ASC71138)✅ Direct replacement for easy install 📦 Part Number: 71157🏁 Brand: Team Associated

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

1up Racing Pro-RX FH5 2.4GHz Receiver – Elite Sanwa Compatibility Without the Cost 💥 Take your control to the next level with the 1up Racing Pro-RX FH5 — a precision-engineered 2.4GHz receiver that delivers elite-level responsiveness and reliability at a price that leaves the competition in the dust. 🏁 Designed to work seamlessly with Sanwa FH5 & FH5U protocols, this compact, antenna-free unit is a favorite among our 1up Factory Drivers. Rigorously tested for top-tier performance, the Pro-RX FH5 brings premium features to your pit table — without the premium price. ✨ Key Features: 🔗 FH5 & FH5U Protocol Compatible – Drop-in ready for your Sanwa M17, MT-5, or MT-R📡 4 Channels – Versatile setup options for steering, throttle, and more⚡ Lightweight & Compact – Only 6.8g, perfect for race builds where every gram counts🔋 Wide Voltage Range – Operates from 3.5V to 8.4V🧰 No Tools Needed – Plug-and-play with included bind plug and protective foam case🚫 Antenna-Free – Clean look and easy install (note: reduced range vs. external antenna units) 📦 What’s in the Box? ✔️ (1) 1up Racing Pro-RX FH5 Receiver✔️ (1) Instruction Manual✔️ (1) Foam-Lined Storage Case✔️ (1) Bind Plug 🔧 Specifications: Compatibility: Sanwa FH5 / FH5U (M17, MT-5, MT-R) Channels: 4 Voltage Input: 3.5–8.4V Dimensions: 28 x 20.5 x 18.5mm Weight: 6.8g 📌 Tech Note: While compact and antenna-free for convenience, this receiver has shorter range than traditional receivers with external antennas. For extended range applications, we recommend the standard Pro-RX model. 🏆 Sanwa-Ready, Race Proven When milliseconds matter, trust the receiver that racers rely on. Get elite FH5 performance without breaking the bank. 💡 Upgrade Smarter – Run the 1up Pro-RX FH5 Today!

Read more less

1up Racing Pro Pit Duster – The Ultimate High-Power Air Blower! Keep your RC cars, trucks, and workspace spotless with the 1up Racing Pro Pit Duster! This lightweight, compact, and ultra-powerful air blower makes cleaning easier than ever—both at the track and at home. Designed for frequent and heavy use, the Pro Pit Duster is not just for RC maintenance—use it to dust electronics, clean car interiors, dry hard-to-reach areas, or even inflate small inflatables. Key Features: ✅ 500+ Watt High-Power Motor – Delivers strong airflow for fast and efficient cleaning.✅ 2 Speed Settings – Offers full control over air output for versatile cleaning needs.✅ Extra-Long 10ft (120V) Power Cable – Provides maximum reach in any workspace.✅ Compact & Lightweight Design – Easy to handle and store, perfect for pits and home use.✅ Versatile Applications – Cleans RC cars, computers, laptops, car interiors, cameras, and more.✅ Included Accessories: Comes with 2 air flow nozzles and a handy brush tip for precision cleaning.✅ Perfect for Drying & Inflating – Easily dries wet surfaces and inflates airbeds, floats, and small inflatables. The Must-Have Pit Tool for Every Racer! Blast away dust, dirt, and debris from RC vehicles, workbenches, and electronics with powerful airflow that reaches even the tightest spots. The 1up Racing Pro Pit Duster is built for durability and convenience, making it an essential tool for any racer or hobbyist. In the Box: (1) 1up Racing Pro Pit Duster Blower (2) Air Flow Nozzles (1) Brush Tip Attachment (1) 10ft (120V) Power Cable Upgrade your pit experience—get the 1up Racing Pro Pit Duster today! 🏁💨

Read more less

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washers – Blue (10) – Part 31385Wider Support. Precision Shimming. Race-Ready Tuning. The Team Associated 7.8x1.0mm Blue Aluminum Ball Stud Washers (31385) are ideal for bulkhead and arm mount shimming in both on-road and off-road 1/10 scale vehicles. With a larger outer diameter, these washers provide more surface area, perfect for critical suspension points where strength and consistency matter. ✅ Pack of 10 precision washers✅ 7.8mm outer diameter / 1.0mm thickness✅ Anodized blue aluminum – lightweight and durable✅ Ideal for bulkhead, arm mount, and ball stud adjustments✅ Common in off-road and on-road setups alike✅ Perfect fit for 1/10 scale race platforms 📦 Includes: (10) 7.8x1.0mm Blue Aluminum Ball Stud Washers Part #: 31385 💡 Pro Tip: Use these in areas where added washer surface area can prevent flex or part deformation over time.

Read more less

Team Associated Rear Hubs Set – RC10B74.1 OEM Replacement for Precision Rear-End Handling The ASC92267 Rear Hubs are a direct replacement for the Team Associated RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built to factory specs, these hubs restore precise suspension geometry and consistent rear-end performance. ⚙️ Features: 🏁 Genuine Team Associated replacement part 🛠️ Maintains proper rear toe and camber link geometry 💪 Durable molded construction for reliable wear resistance 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Stay dialed and race-ready—replace worn or damaged hubs with confidence.  

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

Upgrade your front end with precision, strength, and expanded tuning capability. Weighing just 10.9 grams, this aluminum R1WURKS B7 Front Ball Stud Mount is lighter than the stock plastic piece and adds two in-between ball stud positions for finer camber-link tuning. It also accepts the optional 10g internal weight for racers who want added front-end stability (sold separately). Features Skeletonized design for optimal strength-to-weight balance 0.6g lighter than the stock plastic mount High-strength 7075-T6 aluminum construction Precision CNC-machined for exact fit and alignment Matte black anodized finish with laser-etched R1 branding Two additional in-between camber link mounting holes Compatible with optional 10g internal weight Includes (1) R1WURKS B7 Front Ball Stud Mount, Aluminum Fitment B7 B7D T7 SC7 For best results, apply low-strength blue thread locker to all screws and tighten until snug. Avoid overtightening.

Read more less

Dial in your aero and add a clean, pro finish to your 1/10 RC build with BOOF RC Wing Washers.These lightweight aluminum washers reinforce your wing mounting points, preventing cracks, pull-through, and premature wear — especially on high-downforce setups. Designed for racers who want performance, durability, and style without paying premium brand prices. Features: ✔️ Lightweight Aluminum Construction – Strong and low-mass for optimal wing support ✔️ Reduces Wing Damage – Prevents cracking and screw pull-through ✔️ CNC Machined Finish – Clean fitment with a premium look ✔️ Multiple Color Options – Customize your style ✔️ Easy Bolt-On Upgrade – Works with standard 1/10 wing hardware Specs: Fitment: 1/10 RC (buggy, touring, drift, basher) Material: Aluminum Hardware: M3 mounting compatible Pack: 2pcs (one pair) Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) In the Pack: (2) BOOF RC Aluminum Wing Washers Perfect For: 1/10 Buggies 1/10 Touring & Drift High-downforce setups Bashers that break wings often Why BOOF RC? Affordable, clean, functional upgrades — without the silly markup.  

Read more less

Sharpen Your Steering. Increase Stability. Go Faster. Dial in front-end precision with the Team Associated RC10T7/RC10SC7 Front Anti-Roll Sway Bar Set — a must-have tuning upgrade for racers looking to reduce chassis roll, increase steering consistency, and fine-tune handling for any surface. Whether you're running high-grip carpet, loose dirt, or rough outdoor terrain, this sway bar set helps keep the front of your truck planted and predictable where it matters most. About the Sway Bar Set Versatile Tuning for Any Track The Front Anti-Roll Sway Bar Set gives you multiple bar thickness options so you can tailor front-end stability to match your track conditions and driving style. ✔ Thicker bar = more stability, smoother steering✔ Thinner bar = more steering rotation This lets you quickly tune steering response, reduce traction rolling, and achieve a balanced, confidence-inspiring setup. Features Three sway bar sizes for fine-tuned handling Reduces chassis roll for improved front-end consistency Boosts steering stability on tight, loose, or bumpy tracks A must-have in any race-day tuning kit Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Front Anti-Roll Sway Bar Set (multiple bar thicknesses)

Read more less

Fine-Tune Your Handling. Maximize Your Grip. Unlock next-level stability with the Team Associated RC10T7/RC10SC7 Rear Anti-Roll Sway Bar Set — the go-to tuning upgrade for racers who demand consistency, balance, and improved cornering on any surface. Whether you're on tight indoor carpet, loose dirt, or bumpy outdoor tracks, this sway bar set helps control chassis roll to keep your truck flatter, more predictable, and faster through every section. About the Sway Bar Set Precision Tuning Made Easy Designed specifically for the RC10T7 and RC10SC7 platforms, this rear sway bar set gives you multiple bar thicknesses to fine-tune how much the rear end stays planted.More resistance = more stability.Less resistance = more rotation.Choose the perfect feel for your track and driving style. A must-have item for racers looking to get the most out of the Team Associated 1/10 4x4 trucks. Features Three sway bar sizes for precise tuning Reduces chassis roll for improved consistency Increases cornering balance and steering predictability Works on tight, loose, and bumpy tracks Perfect for any racer’s tuning bag Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Rear Sway Bar Set (multiple bar thicknesses)

Read more less

Avid Slip Bearing Oil | High-Performance Teflon-Based Lubricant [AV10134] Product Overview: Slip into unmatched performance with Avid Slip Bearing Oil—now with a light blue tint! This ultra-premium Teflon-based oil is engineered to drastically reduce metal-on-metal friction, extend bearing life, and protect against rust and dirt. Put through rigorous third-party testing, Slip Bearing Oil has proven to outperform typical light oils with ease. The convenient oiler pen features a 1" steel precision tip, perfect for quick access to clutch or wheel bearings. Each pen contains 1/4oz (7.4cc) of high-efficiency lubricant—enough for over a year of racing use! Features: Teflon-based formula for extreme anti-friction performance Light blue tint for easy visual reference Reduces wear, repels dirt, and displaces moisture Ideal for clutch and wheel bearings Convenient oiler pen with 1" steel tip and protective cap 1/4oz (7.4cc) of oil lasts through countless applications Pro Tip:For clutch bearings, blow out factory grease before initial use. After each clutch inspection, wipe bearing clean and reapply 1 drop of Slip Bearing Oil for maximum life and performance. Includes:  • (1) Avid Slip Bearing Oil Pen

Read more less

⚙️ Precision-Engineered Power. Made in the USA. The Avid RC Triad 69-Tooth Spur Gear is built exclusively for the Avid Triad Slipper Clutch System, delivering ultra-smooth, ultra-quiet performance with unmatched durability. Crafted from Avid’s custom-blend low-noise material, this gear eliminates the harsh sound of standard fiberglass spurs while offering three times the impact strength of Delrin — all in a perfectly balanced, true-spinning design. ⚡ Features: 🇺🇸 Made in the USA from a proprietary high-strength plastic — zero glass fibers for low noise and maximum toughness 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form provides smooth rolling and consistent mesh 🎯 Centerpoint injection-molded for perfect balance and true rotation 🧩 Number of teeth molded in for easy identification 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch setup compatibility 🧠 Designed exclusively for use with the Avid Triad Slipper Clutch System 📏 Specifications: Pitch: 48P Tooth Count: 69T Compatibility: Avid Triad Slipper Clutch System (Stock or Mod Kit) Part Number: AV1020-69 💡 Pro Tip:Keep a few different Triad spur sizes (66T–87T range) on hand so you can fine-tune your gearing for any track layout or motor setup.  

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

Keep your RC10T6.2 drivetrain running smooth with these 92.5mm Rear CVA Bones. Built to handle the demands of competitive racing, these precision components deliver efficient power transfer and long-lasting durability on high-performance stadium trucks. 🔥 Key Features: Designed specifically for the RC10T6.2 rear CVA drivetrain 92.5mm length for proper fit and rear suspension geometry Durable steel construction for high-strength performance Factory Team-grade reliability and consistency Ideal for replacing worn or damaged CVA bones ✅ Compatibility: RC10T6.2 May fit other Team Associated vehicles using 92.5mm CVA bone setups—check manual for fitment 📦 Includes: (2) Rear CVA Bones (92.5mm) ⚠️ Tip:Lubricate pivot points and inspect CVA components regularly for wear to extend drivetrain life.

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with thin viscosity CA glue. Package includes ten tips.

Read more less

Boost your efficiency with the XRAY Slipper Eliminator Composite Spur Gear. Designed to work seamlessly with the XRAY Slipper Eliminator system, this 69T / 48 pitch spur gear offers reduced weight, smooth power transfer, and dependable durability. Made from XRAY’s premium composite material, it provides a perfect balance of strength and low rotational mass. Features: High-strength composite construction for maximum durability Lightweight design reduces drivetrain drag Precision molded for smooth and quiet operation Intended for use with the XRAY Slipper Eliminator Set Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for gearing) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for gearing) Part Number: 325869      

Read more less

Upgrade your drivetrain for maximum efficiency with the XRAY Slipper Eliminator LCG Ultra-Lightweight Set. Designed for serious racers, this setup completely eliminates the traditional slipper clutch, reducing rotating mass and delivering a more direct throttle response. Perfect for high-traction conditions where a slipper is not required. Features: Ultra-lightweight design reduces rotating mass for quicker acceleration LCG (Low Center of Gravity) construction enhances balance and stability Provides more consistent power transfer and improved efficiency Precision-machined for a perfect fit with XRAY driveline components Complete set includes everything needed for installation Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for specifics) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for specifics) Part Number: 324103  

Read more less

Dial in the perfect rear suspension setup with the XRAY 57.5mm Big Bore Rear Conical Spring Set. These precision-engineered springs are designed for XRAY big-bore rear shocks, giving you the flexibility to tune your buggy or stadium truck’s handling to match any track condition. Each spring is color-dot coded from soft (1-Dot) to stiff (5-Dot) for quick identification. Features: Set includes (2) precision-made conical rear springs 57.5mm length, built for XRAY big-bore rear shocks Dot-coded system for easy rate identification Softer springs provide more traction and bump absorption Stiffer springs increase stability and sharpen handling response Spring Rates (Softest → Hardest): 1-Dot – Part #368481 2-Dot – Part #368482 3-Dot – Part #368483 4-Dot – Part #368484 5-Dot – Part #368485 Effects of Shock Spring Changes: Softer: More chassis roll, more rear traction, better bump compliance, but more bottoming out. Stiffer: Less chassis roll, reduced rear traction, quicker response, more stability in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Rear) XRAY XT2 – 1/10 Stadium Truck (Rear) Other XRAY 57.5mm big-bore rear shock applications (check manual for confirmation).

Read more less

Fine-tune your suspension with the XRAY 42.5mm Big Bore Front Conical Spring Set. Designed for big-bore shocks, these precision-engineered springs allow you to dial in your buggy or stadium truck’s handling for any track condition. Each spring is color-dot coded for quick identification, ranging from soft (1-Dot) to firm (5-Dot). Features: Set includes (2) precision-made conical front springs 42.5mm length, designed for XRAY big-bore shocks Dot-coded system for quick rate identification Softer springs increase traction and absorb bumps Stiffer springs increase responsiveness and reduce chassis roll Spring Rates (Softest → Hardest): 1-Dot – Part #368381 2-Dot – Part #368382 3-Dot – Part #368383 4-Dot – Part #368384 5-Dot – Part #368385 Effects of Shock Spring Changes: Softer: More chassis roll, more traction, smoother on bumps, but more prone to bottoming out. Stiffer: Less chassis roll, less traction, sharper response, improved handling in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Front) XRAY XT2 – 1/10 Stadium Truck (Front) Other XRAY 42.5mm big-bore front shock applications (check manual for confirmation).

Read more less

💥 Smart, Simple, Powerful. Level up your charging game with the Gens Ace iMars S100 – a compact beast that delivers up to 10 amps of charging power with 100 watts of output, all packed into a sleek and portable design. Whether you're juicing up FPV drone packs, 1/10 & 1/8 scale race packs, or heli batteries, this charger does it all with ease. ✅ G-Tech Smart Compatible (and works with non-smart packs too)✅ Physical button interface – no more accidental swipes✅ AC 100–240V input – travel-friendly worldwide✅ Color display + clean UI – see everything at a glance✅ XT60 output + multiple adapter cables included✅ Super lightweight – only 260g! 🔧 Specs at a Glance:• Input Voltage: AC 100-240V• Output Voltage: 27V max• Charge Power: 100W / 10A max• Discharge Power: 5W• Cell Types: 2S–6S LiPo, LiFe, Li-ion, LiHV | 4S–18S NiMH• Output Connector: XT60• Size: 139.8 x 83 x 40mm• Weight: 260g 📦 In the Box:• iMars S100 Charger (Black or White)• AC Power Cable• XT60 to EC3 / EC5 / T-Plug Adapters• USB Cable 👉 Lightweight. Versatile. Ready to travel or race. The iMars S100 is the perfect smart upgrade for your pit bag.

Read more less