Light up the trail beneath your rig with the INJORA Rock Lights Kit, designed specifically for 1/18 and 1/24 scale crawlers.With multiple mounting bracket options, bright LED output, and flexible control modes, this kit adds both scale realism and functional illumination to your SCX24, AX24, TRX4M, Ascent18, and more. Choose White or Yellow LEDs, and select the correct screw size for your vehicle. ⭐ Features 3 Lighting Modes: Steady • Breathing • Strobe Bright ground-lighting LEDs for night runs and scale realism Includes cable ties for clean wire management Plug-and-play installation Flexible control options: Manual: Built-in button cycles through modes Remote: Plug into CH3 or CH4 and switch modes from your transmitter Two mounting bracket types for multiple vehicle fitments 🔧 Fitment / Screw Size Options M1.4 Screws (1/24 models) Axial SCX24 Axial AX24 M2.0 Screws (1/18 & 1/24 models) Traxxas TRX4M Redcat Ascent18 Other 1/18 & 1/24 crawlers using M2 hardware 📐 Specifications Light Mount Material: Aluminum Operating Voltage: 5V–7.4V LED Colors: White or Yellow Wire Length: ~245mm (9.65") Variants: DG-L35-4 — White LEDs, M1.4 screws DG-L36-4 — White LEDs, M2 screws DG-L35-4YE — Yellow LEDs, M1.4 screws DG-L36-4YE — Yellow LEDs, M2 screws 📦 Includes (4) LED Rock Lights Aluminum mounting brackets (1) Light controller Cable ties Mounting screws (M1.4 or M2 depending on selection)  

Read more less

Boost the steering power and durability of your TRX4M with the INJORA INJS2065 Waterproof High Voltage Digital Servo. Designed specifically for 1/18 TRX4M crawlers, this servo delivers strong torque, fast response, and full IP66 waterproof performance — perfect for trail, mud, snow, and creek crossings. This upgrade includes both the aluminum servo mount AND a 25T servo horn, giving you everything needed for a clean, direct installation. ⚠️ IMPORTANT:• Use only with the included INJORA servo mount for proper fitment.• If using the stock plastic TRX4M mount, trimming is required. 🔧 Compatibility Fits all 1/18 Traxxas TRX4M models: TRX4M Defender TRX4M Bronco TRX4M High Trail K10 TRX4M High Trail F150 ⭐ Features IP66 waterproof — safe for rain, mud, and underwater driving High-voltage digital servo (6V–8.4V) Strong stainless steel gears Fast response with excellent precision Includes aluminum servo mount Includes 25T servo horn Lower noise, smooth operation Durable, compact upgrade for any TRX4M build 📊 Specifications Model: INJS2065Voltage Range: 4.8V–8.4VMotor: Core MotorDead Band: 2μsNeutral Position: 1500μs / 330Hz Speed 0.09s / 60° @ 6.0V 0.06s / 60° @ 8.4V Torque 6.0 kg-cm (83.3 oz-in) @ 6.0V 7.0 kg-cm (97.2 oz-in) @ 8.4V Rotation Angles RC Angle: 90–120° ±2° Wide Angle (500–2500μs): 180° ±2° Size & Weight Dimensions: 23 × 13 × 25.8 mm Weight: 20g Wire: JR 300mm Spline: 25T (5.9mm) Bearing: 1BB 🧰 Required Tools 1.5mm hex driver 2.0mm hex driver 📦 Includes (1) INJORA INJS2065 Waterproof Servo (1) Aluminum Servo Mount (1) 25T Servo Horn Mounting Hardware

Read more less

🔑 Carry Your RC Passion Everywhere Show off your love for the INJORA brand with this premium Carbon Fiber Lanyard Keychain — a sleek, lightweight accessory that’s perfect for keys, tools, or even your transmitter bag. Built with real carbon fiber and durable paracord, it’s the perfect balance of strength, style, and function. ⚡ Features: 🏁 Carbon fiber logo tag with the official INJORA branding 🔩 Strong metal key clip — secure your keys or RC tools 🧵 Durable nylon paracord loop for long-lasting use 💨 Lightweight and easy to carry anywhere 💯 Perfect everyday accessory for RC enthusiasts 📏 Specifications: Part Number: INA-128 Material: Carbon Fiber Tag + Metal Clip + Nylon Cord Length: 185mm Weight: 12.2g Quantity: 1 Piece 📦 Includes: (1) INJORA Carbon Fiber Keychain Lanyard 💡 Pro Tip:Attach it to your transmitter case, pit bag, or tool set — it’s a stylish way to keep your essentials organized and show off your RC pride.  

Read more less

⚙️ Fine-Tune Every Detail of Your Build The INJORA Stainless Steel Spacer & Washer Set is a must-have for builders who like precision. Perfect for custom link setups, suspension tuning, wheel spacing, or body adjustments, these shims help you dial in exact fitment on your 1/18 TRX4M or other micro crawlers. Each pack includes four different thickness options for total flexibility. ⚡ Features: 🧱 Made from durable stainless steel for strength and corrosion resistance 🔧 Multi-use design — ideal for shocks, links, or wheel adjustments 🧲 Perfect fit for M2.5 hardware on TRX4M platforms 🎯 Includes 1mm, 2mm, 3mm, and 4mm spacers for precise tuning 📦 Organized and reusable packaging for easy workshop use 📏 Specifications: Part Number: 4M-52 Material: Stainless Steel Inner Diameter: 2.5 mm Outer Diameter: 4 mm Heights: 1 mm / 2 mm / 3 mm / 4 mm Total Pieces: 80 📦 Includes: 20 × M2.5 × 4 × 1 mm Washers 20 × M2.5 × 4 × 2 mm Washers 20 × M2.5 × 4 × 3 mm Washers 20 × M2.5 × 4 × 4 mm Washers 🔧 Compatibility: 1/18 TRX4M (Defender / Bronco / K10 / F-150) Other micro crawlers using M2.5 hardware 💡 Pro Tip:Keep this kit in your pit box — it’s the easiest way to eliminate slop, correct alignment, and perfect your suspension geometry between runs.    

Read more less

🧰 High-Strength Hardware for Serious Builders Upgrade your TRX4M’s reliability with the INJORA Grade 12.9 Stainless Steel Hardware Kit. Built for durability and precision, this kit includes a full selection of button-head screws and nuts to replace or upgrade the stock fasteners on your 1/18 TRX4M. With corrosion-resistant stainless steel construction and organized storage, this is a must-have kit for any serious RC crawler enthusiast. ⚡ Features: 🔩 Made from Grade 12.9 stainless steel — extreme strength and corrosion resistance 🧱 Direct fit for TRX4M — replaces stock hardware (except diff cover screws) 🧰 Includes multiple sizes and lengths to fit any build need 💪 Prevents rust, bending, and stripped heads for long-term performance 📦 Comes in a labeled storage box for easy organization and access 📏 Specifications: Part Number: 4M-15 Material: Grade 12.9 Stainless Steel Finish: Silver Polished Compatibility: 1/18 TRX4M (Defender, Bronco, K10, F-150) Note: Does not include screws used in the stock diff covers 📦 Includes: 10 × M1.6 × 7 mm Screws 12 × M1.6 × 12 mm Screws 10 × M2 × 4 mm Screws 45 × M2 × 6 mm Screws 10 × M2 × 8 mm Screws 10 × M2 × 12 mm Screws 8 × M2.5 × 8 mm Screws 10 × M2.5 × 10 mm Screws 10 × M2.5 × 12 mm Screws 20 × M2.5 × 14 mm Screws 15 × M2.5 × 18 mm Screws 5 × M2.5 × 21 mm Screws 3 × M3 × 6 mm Flat-Head Screws 28 × M3 × 6 mm Pins (Various Types) 10 × M2.5 Nuts (1) Reusable Plastic Storage Case 💡 Pro Tip:Keep one of these kits in your pit box — it’s the fastest way to replace missing hardware and keep your TRX4M tight and trail-ready after every run.    

Read more less

💡 Light Up Your Night Crawls! Bring your micro crawler to life with the INJORA LED Whip Light, designed for 1/18 and 1/24 scale RC rigs. Whether you’re running late-night trail sessions or just want to add some serious style to your build, this whip light delivers bright, customizable color options and easy plug-and-play installation. Note: A separate light controller (sold separately) is required to activate steady, breathing, and strobe modes. ⚡ Features: 💎 4 Color Options: Red, Ice Blue, Pinkish Purple, or Green 🧭 Easy to Install: Simple wiring and mounting for fast setup 🔩 Mount Options: Choose roll cage mount or body mount for perfect placement 🌙 Enhanced Visibility: Bright LED glow stands out during night runs 🪶 Lightweight & Durable: Weighs just 3.6g with sturdy construction 🚙 Perfect Fit: Ideal for 1/18 & 1/24 crawlers and other mini RC rigs 📏 Specifications: Voltage: 5–7.4V Height: 107mm Weight: 3.6g Colors: Red, Ice Blue, Pinkish Purple, Green Lighting Modes (with controller): Steady, Breathing, Strobe Control Options: Manual or CH3 button on transmitter 📦 Includes: (1) INJORA LED Whip Light 🔧 Compatibility: 1/18 & 1/24 scale RC crawlers (such as TRX-4M, SCX24, FCX24, and similar) 💡 Pro Tip:Add the optional INJORA LED Light Controller for full control of lighting effects — perfect for show rigs or night trail adventures!  

Read more less

🎛️ Control the Glow — Command Your Lights! Bring your mini crawler’s lighting system to life with the INJORA LED Light Controller, designed to unlock the full potential of your INJORA LED Whip Lights and other 5–7.4V lighting accessories. Switch between steady, breathing, and strobe modes at the press of a button — or from your transmitter’s CH3 channel — for the ultimate control and night-trail style. ⚡ Features: 🎨 3 Dynamic Modes: Steady, Breathing, and Strobe effects 🔘 Dual Control Options: Manual toggle or CH3 transmitter control 🔌 Plug-and-Play Setup: Quick connection to any INJORA LED Whip Light ⚡ Wide Voltage Range: Works with 5–7.4V systems 💪 Lightweight & Durable: Compact build with reliable performance 🧭 Flexible Mounting Length: 175mm (6.89in) total cable length 📏 Specifications: Operating Voltage: 5–7.4V Length: ~175mm (6.89in) Weight: 3.2g Lighting Modes: Steady, Breathing, Strobe Control Options: Manual switch or CH3 channel 📦 Includes: (1) INJORA LED Light Controller 🔧 Compatibility: INJORA LED Whip Lights (DG-L34 Series) Other 5–7.4V LED accessories for 1/18 & 1/24 crawlers 💡 Pro Tip:Pair with INJORA DG-L34 Whip Lights to complete your light system and add striking visual effects to your trail rig!  

Read more less