⚙️ Precision Aluminum Spur Gear Upgrade for Traxxas 2WDTake your Traxxas performance to the next level with the Hot Racing 48 Pitch Hard Anodized Aluminum Spur Gear (90T). Designed for speed enthusiasts and precision builders, this CNC-machined aluminum gear provides smoother power transfer, reduced flex, and improved efficiency compared to the stock nylon spur gear. 🔩 About the Spur Gear Crafted from 6061-T6 aluminum, this gear is hard-anodized in a sleek light gunmetal finish for enhanced strength and wear resistance. The included silver anodized countersunk washers and high-strength hardware ensure a secure and professional-grade installation. Perfect for high-RPM setups and consistent gear mesh, this upgrade provides durability without sacrificing performance. 🌟 Features CNC-machined 6061-T6 aluminum for high precision and strength Hard-anodized gunmetal finish resists corrosion and wear Direct replacement for the stock nylon spur gear Silver anodized washers and mounting hardware included 48 pitch gearing with a 90-tooth configuration Ideal for smooth, efficient, high-speed performance 📏 Specifications Pitch: 48P Tooth Count: 90T Mounting Holes: 3 Tooth Face Width: ~5mm 📦 Includes (1) 48 Pitch Aluminum Spur Gear (90T) (3) Mounting Screws (3) Silver Anodized Countersunk Washers (3) Flat Washers (for optional spacing) ⚠️ Notes Aluminum gears prioritize speed and precision over maximum durability. Do not overtighten the slipper clutch — excessive tension may cause gear failure. Recommended motor temps: below 160°F, ESC below 160°F. For added motor security, use Hot Racing HRATE18L06 motor lock plate. Always check gear alignment before running. 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD 🏁 Built for precision, performance, and durability — the Hot Racing 90T aluminum spur gear keeps your Traxxas running smooth, fast, and reliable.

Read more less

The Hot Racing 16T Mod-1 Pinion Gear is built from hardened steel for maximum strength and precision. Ideal for 1/8-scale vehicles running Mod-1 gears, it ensures smooth power delivery and long-lasting durability under extreme conditions. ✅ Hardened Steel Construction – Designed for strength and wear resistance✅ 5mm Bore / Mod-1 Pitch – Compatible with standard 1/8-scale brushless setups✅ Precision-Cut Teeth – Delivers smooth, efficient power transfer Specifications: Length: 12 mm (0.47") Inner Diameter: 5 mm (0.20") Color: Black Part #: NSG16M1Includes: (1) 16T Mod-1 Pinion Gear (1) 4×4 mm Set Screw Requires installation on vehicle

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

🌀 Stronger. Smoother. Smarter. Upgrade your Mini Maxx’s drivetrain with the Hot Racing Steel Helical Rear Ring & Pinion Gear Set. Precision-machined from high-carbon steel, this 39T/10T gear combo delivers smoother operation, quieter performance, and higher torque-handling than stock. The helical cut design distributes load more evenly—perfect for high-power setups and serious bashers. ✅ Helical spiral-cut = quieter + smoother power delivery✅ High-carbon steel for extreme durability✅ Handles more torque with fewer teeth✅ Drop-in upgrade for the Traxxas Mini Maxx (rear) 📦 Includes:• (1) 39T Steel Helical Rear Ring Gear• (1) 10T Steel Helical Rear Pinion Gear Tame the torque. Quiet the chaos. Dominate the trail.

Read more less

Take your Mini-T 2.0 to the next level with these Hot Racing Steel Universal Axle Drive Shafts! Designed as a direct replacement for the stock axles, these heavy-duty upgrades deliver increased strength, smoother operation, and long-lasting performance for bashing or racing. 🔧 Features:✅ CNC machined from S2 spring steel for superior durability✅ Replaces factory dogbone and wheel shafts (LOS212013 & LOS212012)✅ Works with stock wheel hex hubs✅ Dogbone pin diameter: 2mm✅ Use light grease to maximize longevity 📦 Includes:(2) Rear Assembled Steel Universal Axle Drive Shafts 🚗 Compatibility:• Losi Mini-T 2.0 2WD

Read more less

🔧 Precision. Strength. Style. Upgrade your steering setup with the Hot Racing Aluminum Servo Horn, designed for the Traxxas TRX-4 and TRX-6. CNC-machined from aluminum and finished in anodized blue, this single-arm servo horn provides greater strength and precision over the stock part, while adding a custom look to your rig. ✅ Fits 25T spline servos – Traxxas, ProTek, Futaba, Savox, and more✅ CNC-machined aluminum for durability✅ Anodized blue finish for style✅ M3 diameter linkage holes✅ Direct replacement for Traxxas part TRA8247✅ Vehicle Compatibility: • Traxxas TRX-4 • Traxxas TRX-6 📦 Includes:• (1) Aluminum Servo Horn – 25T (Blue)

Read more less

🔥 Upgrade Your Steering for Precision and Power Take control of your Losi Mini with the Hot Racing Aluminum Steering Bellcrank. Built from high-quality 6061-T6 aluminum, this upgrade replaces the stock plastic bellcrank to deliver smoother, more precise steering response and unbeatable durability. Whether you're bashing or racing, this is a must-have performance enhancement. ⚙️ Features: CNC-machined 6061-T6 aluminum for maximum strength and style Ball bearing-supported for ultra-smooth steering action Replaces weak factory plastic for improved precision Black anodized finish for a sleek, professional look 📦 Includes: (2) Aluminum Bellcranks (1) Bellcrank Tie Rod (4) Ball Bearings (2) Stainless Steel Bearing Posts Mounting Hardware 🔧 Compatibility: Losi Mini-B Losi Mini-T 2.0

Read more less

Lock in serious traction with the Hot Racing Aluminum Differential Locker Spool for the Arrma Grom lineup. Designed to replace the front or rear diff, this CNC-machined aluminum spool forces both wheels on an axle to rotate together—perfect for crawling, bashing, or low-traction terrain where grip is everything. 🔧 Features: ✅ CNC-machined solid aluminum construction for strength and durability✅ Anodized red finish for corrosion resistance and a sleek look✅ Locks the differential for equal wheel speed and max traction✅ Ideal upgrade for low-traction, off-road environments 📦 Includes: • (1) Aluminum Differential Locker Spool Set 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom 💡 Note: Recommended for use on loose surfaces. On high-traction terrain, driveline stress may increase.

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Rear Upper Arm Set (Black) ⚡ 💪 Precision-Engineered Strength for Ultimate Performance! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Rear Upper Arm Set! These CNC-machined aluminum arms provide next-level durability and rigidity, improving handling, control, and stability for intense off-road action. Whether you're taking on rocky terrain, high-speed runs, or massive jumps, these arms are built to handle it all. 🏆💨 The sleek black anodized finish adds a professional, high-performance look while also providing corrosion resistance, ensuring long-lasting durability no matter where you bash! 🌧️☀️ ✅ Key Features: ✨ CNC-Machined Aluminum Construction – Stronger & more durable than stock plastic arms🛠️ Enhanced Rigidity & Stability – Improved control for high-speed and off-road performance⚡ Anodized Black Finish – Sleek & professional look with added corrosion resistance🔩 Precision-Engineered Fit – Direct replacement for stock components🔧 Includes Steel Pivot Balls & O-Rings – Ensures smooth articulation and easy installation 📦 Includes: ✔️ (1) Left Rear Upper Arm✔️ (1) Right Rear Upper Arm✔️ (2) Steel Pivot Balls✔️ (4) O-Rings 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Rear Lower Arm Set (Black) ⚡ 💪 Reinforced Strength & Performance for Your Grom! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Rear Lower Arm Set—built for ultimate durability, precision, and performance! These CNC-machined aluminum lower arms offer superior strength and rigidity, improving handling and stability when tackling extreme terrain and big jumps. 🏆💨 With a sleek black anodized finish, these arms provide corrosion resistance and a professional look, ensuring long-lasting performance in any bashing environment. 🌧️☀️ ✅ Key Features: ✨ CNC-Machined Aluminum Construction – Stronger & tougher than stock composite arms🛠️ Increased Rigidity & Durability – For enhanced handling & stability⚡ Anodized Black Finish – Sleek appearance + added corrosion resistance🔩 Precision-Engineered Fit – Direct replacement for factory components🔧 Includes Mounting Hardware – Easy installation for quick upgrades 📦 Includes: ✔️ (1) Left Rear Lower Arm✔️ (1) Right Rear Lower Arm✔️ (2) Mounting Screws 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Lower Arm Set (Black) ⚡💪 Unmatched Strength & Stability for Your Grom! 💪 Take your Arrma Granite Grom to the next level with the Hot Racing Aluminum Front Lower Arm Set! Built for hardcore bashers, these CNC-machined aluminum arms add serious strength, stability, and style to your 1/18 4WD Monster Truck. 🏆💥 Tackle rough terrain and massive jumps with confidence. The anodized black finish not only gives your rig a sleek, aggressive look but also offers corrosion resistance for all-weather durability. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For superior handling & control⚡ Anodized Finish – Corrosion-resistant with a sleek, pro look🔩 Precision-Engineered Fit – Easy installation & perfect alignment🔧 Pre-Installed Steel Pivot Balls & Mounting Screws – Ready to bash! 📦 Includes: ✔️ (1) Left Front Lower Arm✔️ (1) Right Front Lower Arm✔️ (2) Pre-Installed Steel Pivot Balls✔️ (2) Mounting Screws 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Upper Arm Set (Black) ⚡💪 Stronger, Sleeker, and Built to Perform! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Front Upper Arm Set! Engineered for strength, precision, and style, these CNC-machined aluminum arms bring next-level durability and performance to your 1/18 4WD Monster Truck. 🏆💥 Designed to handle the roughest terrains and biggest jumps, the anodized black finish not only adds a sleek look but also protects against corrosion — so you can bash harder, longer, and in any weather. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For better handling & stability⚡ Anodized Finish – Sleek look + corrosion resistance🔩 Precision-Engineered Fit – Easy install & perfect alignment🔧 Pre-Installed Steel Pivot Balls – Ready to drop in 📦 Includes: ✔️ (1) Left Front Upper Arm✔️ (1) Right Front Upper Arm✔️ (2) Pre-Installed Steel Pivot Balls 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less