When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Motor Overview:The Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor is built from the ground up for racers who demand top-tier speed, torque, smoothness, and durability in 1/8 truggy competition. Engineered around a long 74mm can, this motor packs massive punch while maintaining ultra-refined control thanks to its advanced sensing system and premium internal design. A staggered-magnet rotor delivers both low-drag efficiency and huge torque, while the high-purity copper windings and heat-resistant magnet formula ensure consistent performance run after run. Add in a fully rebuildable architecture — including a replaceable sensor board — and you’ve got a high-end truggy motor designed to win championships and take abuse doing it. To keep temps under control even in brutal racing conditions, Exalt uses a 2mm-thick aluminum can paired with ventilation ports that allow airflow in while keeping debris out. The result is a high-power 1/8 truggy motor that stays cool, reliable, and consistent all day long. Features: Long-can 74mm design for extreme torque & power Staggered-magnet rotor for low drag and incredible punch Adjustable timing from 0–40° (CW/CCW) Sensored & sensorless compatible Rebuildable with replaceable sensor board High-purity copper windings High-strength, heat-resistant magnet formula Top-quality alloy steel 5mm output shaft Advanced hall-sensing separation design for smoother throttle response Large vent ports for airflow while blocking debris ROAR Approved! Specifications: Type: Sensored Brushless kV: 2350kV Voltage: 2–4S LiPo (7.4–14.8V) Poles: 4 Timing: 0–40° Adjustable (CW/CCW) Diameter: 41.8mm (1.645") Length: 74mm (2.91") Shaft Diameter: 5mm Shaft Length: 17.7mm (0.696") Weight: 386g (13.6oz) Application: 1/8 Truggy Competition Includes: (1) Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor (2350kV) (1) Sensor Wire

Read more less

Dial in a firmer front-end feel with the Team Losi Racing 13mm Front Springs (Purple, 4.75lb). This higher spring rate is ideal for high-grip conditions, aggressive steering response, and improved support under braking and corner entry. Precision-wound to Team Losi Racing standards, these springs deliver consistent rates and repeatable performance, making them a dependable option for fine-tuning front suspension behavior on race day. Features: 13mm front shock springs Purple color code for easy identification 4.75lb spring rate for increased front-end support Precision-wound for consistent performance Ideal for high-grip track conditions Includes: (2) Team Losi Racing Front Springs Part Number: TLR-1203  

Read more less

Fine-tune rear grip and balance with the Team Losi Racing 13mm Rear Springs (Orange, 1.98lb). Designed for precision suspension tuning, these springs offer a softer rear spring rate that improves traction, compliance, and corner exit control on low- to medium-grip track conditions. Manufactured to Team Losi Racing’s exacting standards, these 13mm springs deliver consistent rates and repeatable performance run after run. Ideal for racers looking to calm the rear of the car while maintaining predictable handling. Features: 13mm rear shock springs Orange color code for easy identification 1.98lb spring rate for increased rear grip Precision-wound for consistent performance Perfect for fine suspension tuning Includes: (2) Team Losi Racing Rear Springs Part Number: TLR-1189  

Read more less

Dial in rear grip and balance with the Team Losi Racing 13mm Rear Springs (Yellow, 2.10lb). This spring rate offers a slightly firmer rear feel compared to softer options, helping improve stability and responsiveness while maintaining predictable traction across a wide range of track conditions. Precision-wound to Team Losi Racing standards, these springs deliver consistent rates and repeatable performance, making them ideal for fine suspension tuning during practice or race day. Features: 13mm rear shock springs Yellow color code for easy identification 2.10lb spring rate for balanced rear traction Precision-wound for consistent performance Ideal for suspension tuning and setup changes Includes: (2) Team Losi Racing Rear Springs Part Number: TLR-1188

Read more less

🔩🛠️ Keep Your Build Tight with Genuine TLR Hardware The Team Losi Racing 2.5x4mm Button Head Hex Screws are genuine OEM replacement fasteners designed for a wide range of Team Losi Racing vehicles. Manufactured with a durable black oxide finish, these precision M2.5 button head screws provide reliable fastening strength for maintenance, repairs, or keeping spare hardware in your pit box. 🛠️ About the Button Head Hex Screws 🔧 Genuine TLR Replacement Hardware Designed to original Team Losi Racing specifications, these screws provide the precise fit and durability needed to replace worn or lost hardware. 💪 Durable Black Oxide Finish The black oxide coating helps resist corrosion while providing a clean factory appearance and dependable performance. 🏁 Great for Repairs & Maintenance Keeping spare hardware on hand helps minimize downtime at the track or during routine vehicle maintenance. 🔧 Features ✔ Genuine Team Losi Racing replacement part✔ Precision M2.5 x 4mm button head screws✔ Durable black oxide finish✔ Hex drive design for secure installation✔ Ideal for maintenance and repairs✔ OEM fit and quality 📦 Includes (10) M2.5 x 4mm Button Head Hex Screws 🚗 Compatibility Compatible with many Team Losi Racing and Losi vehicles that utilize M2.5 x 4mm button head screws. Always consult your vehicle's exploded view or owner's manual to verify the correct hardware size before installation. ⚠️ Notes Genuine Team Losi Racing replacement hardware. M2.5 x 4mm button head design. Black oxide coated for durability and corrosion resistance. Verify the required screw size for your specific vehicle before installation.

Read more less

  Keep your transmission running smooth with this genuine TLR 22 4.0 laydown idler gear and shaft set. Designed specifically for the laydown transmission setup, this replacement set includes everything needed to restore drivetrain performance. ✅ Includes:• (2) Idler Gears• (1) Idler Shaft ✅ Compatible with: TLR 22 4.0 Laydown Transmission✅ OEM replacement for precise fit and function✅ Built tough for high-performance racing Essential for keeping your TLR 22 4.0 dialed in and track-ready.

Read more less

Team Losi Racing 22 5.0 Aluminum Clamping Servo Horn (Black) (25T)PART: TLR331033 Upgrade your steering precision with the Team Losi Racing 25T Aluminum Clamping Servo Horn, designed specifically for the 22 5.0 Electric Buggy Kits. This optional servo horn is CNC-machined from lightweight aluminum for strength and reliability under high stress. Finished in black anodizing with chamfered edges, it adds a touch of style while delivering top-tier performance. The clamping design ensures a secure, tight fit to your servo. Features: Precision-machined from lightweight aluminum Durable black anodized finish with chamfered accents Clamping style for secure fitment Compatible with 25T spline servos Designed for 22 5.0 Electric Buggy Kits

Read more less

Keep your 22 5.0 performing at its best with the Team Losi Racing Front Spindle Set. This is a direct replacement for the kit-supplied front spindles, perfect for maintenance, repairs, or keeping spares in your pit box. Features & Benefits: Genuine Team Losi Racing replacement part Precision molded for proper fit and smooth steering action Restores factory steering geometry and suspension performance Compatibility: Team Losi Racing 22 5.0 platforms Includes: Front spindle set (left & right) A must-have replacement to keep your TLR 22 5.0 dialed and race-ready.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

Keep your front suspension tight and precise with the Team Losi Racing 22X AC Narrow Caster Blocks. These genuine replacement parts are designed specifically for the 22X AC 2WD buggy platform and are ideal for repairs, rebuilds, or keeping spares in your pit box. Features & Benefits: Genuine Team Losi Racing replacement components Narrow caster block design for proper 22X AC front-end geometry Precision molded for consistent fit and smooth steering action Compatibility: Team Losi Racing 22X AC 2WD Buggy Includes: (2) Narrow caster blocks Perfect for maintaining factory handling and reliability on your 22X AC.  

Read more less

  The Team Losi Racing TLR-1086 AC Narrow Steering Spindle Knuckles are direct replacement components for the 22X 2WD buggy platform. Designed to factory specifications, these knuckles restore proper steering geometry and front-end durability for race or maintenance applications. Ideal for repairs, rebuilds, or keeping spares on hand for race day. 🔧 Features Genuine Team Losi Racing replacement parts AC narrow steering spindle design Precision-molded for accurate fit and alignment Direct replacement for stock components 📦 Includes (2) Narrow Steering Spindle Knuckles ✅ Compatibility Losi 22X Losi 22X-T

Read more less

The Team Losi Racing 22X AC Sway Bar Link Set (TLR-1112) is a replacement sway bar linkage set designed for the TLR 22X 2WD buggy platform. These links connect the sway bar system to the suspension, helping maintain consistent chassis balance and improved cornering stability. Built to OEM specifications, this set is perfect for replacing worn components or refreshing your suspension setup to keep your buggy performing at its best on the track. Features• Genuine Team Losi Racing replacement part• Designed for the TLR 22X 2WD buggy platform• Maintains proper sway bar operation and suspension balance• Ideal for maintenance, repairs, or race-day spares Includes• (1) AC Sway Bar Link Set  

Read more less

Fine-tune your track width and lock in wheel reliability with the Team Losi Racing 22X Aluminum 12mm Wheel Hex set. Precision-machined from ultra-lightweight, rigid aluminum, these hexes deliver strength and durability without adding unnecessary rotating weight. The clamp-style design provides a secure, slip-resistant fit on the axle, helping eliminate wheel wobble and improving consistency under acceleration and heavy cornering loads. Finished with a durable anodized coating, these hexes resist corrosion while giving your 22X that clean, pro-level race look. Laser-etched size markings make quick setup changes easy at the track, and the included axle pins ensure straightforward installation. The 7mm thickness option allows precise tuning of track width and handling characteristics to match surface conditions and driving style. Features: Strong, lightweight aluminum construction Clamp-style design for secure axle fit Anodized finish for durability and corrosion resistance Laser-etched size markings for quick identification Includes axle pins for easy installation 7mm thickness for precise track width tuning Includes: (2) Aluminum 12mm Wheel Hex (7mm) Built for serious racers who demand precision, durability, and consistent performance from their TLR 22X platform.

Read more less

Wheel Hex Overview:The Team Losi Racing 22X Aluminum 12mm Wheel Hex set is a lightweight upgrade designed to improve wheel security and consistency. Precision-machined for a secure fit, these hexes help maintain reliable performance on the track. 🏁 About the Aluminum Wheel Hex ⚙️ Lightweight & Secure Made from strong, lightweight aluminum, these hexes add durability without unnecessary weight. The clamp-style design helps keep wheels securely mounted, even under demanding conditions. ✨ Clean, Functional Design An anodized finish provides corrosion resistance and a professional look, while laser-etched markings make it easy to identify size at a glance. 🔧 Key Features ✔ Lightweight aluminum construction✔ Clamp-style design for secure fit✔ Anodized for durability and corrosion resistance✔ Laser-etched size markings✔ Includes axle pins for easy installation✔ 8mm thickness 📦 Includes (2) Aluminum 12mm Wheel Hexes Axle Pins 🚗 Compatibility Team Losi Racing 22X platforms A simple upgrade that adds strength and reliability, these aluminum hexes help keep your wheels secure and your setup consistent on track.  

Read more less

Upgrade your TLR 22X with the Aluminum Narrow Steering Spindles (2°), engineered for racers seeking precise steering response, improved durability, and consistent performance across varying track conditions. The narrow configuration provides refined steering characteristics suited for specific setup needs and tuning preferences. Precision CNC machined from high-strength 7075 aluminum, these spindles deliver exceptional strength and impact resistance while maintaining lightweight performance. The black anodized finish with chamfered edges enhances durability and corrosion resistance while giving your build a clean, factory race appearance. Features 2° narrow steering spindle configuration CNC machined for precise fit and finish Constructed from high-strength 7075 aluminum Black anodized for added durability Chamfered edges for a premium look Improves steering precision and stability Lightweight yet highly durable design Direct upgrade for TLR 22X platforms Includes (2) Aluminum Narrow Steering Spindles (Black, 2°) A race-focused steering upgrade designed to sharpen handling and increase front-end durability on the TLR 22X platform. 🏁    

Read more less

Upgrade your TLR 22X with the Aluminum Wide Steering Spindles (8°), designed for racers who demand sharper steering precision, increased durability, and consistent performance under race conditions. These wide spindles enhance front-end geometry while maintaining lightweight responsiveness for competitive 2WD racing. Precision CNC machined from high-strength 7075 aluminum, these spindles provide superior strength and impact resistance compared to stock components. The black anodized finish with chamfered edges adds corrosion protection and a clean, factory race look. Features 8° wide steering spindle configuration CNC machined for precise fitment Constructed from high-strength 7075 aluminum Black anodized for durability and corrosion resistance Chamfered edges for a clean finish Improves steering precision and stability Lightweight yet highly durable design Direct upgrade for high-performance racing setups Includes (2) Aluminum Wide Steering Spindles (Black, 8°) ⚠️ Note: TLR-1187 Delrin Spindle Bushings are required for installation. A premium steering upgrade that enhances durability, precision, and confidence on the track. 🏁    

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

The Team Losi Racing TLR-1075 Bulkhead and Kick Shims Set is a direct replacement designed for the 22X 2WD buggy platform. This set restores proper front-end geometry and durability, making it ideal for maintenance, rebuilds, or race prep. Manufactured to exact factory specifications, this bulkhead and shim set ensures correct kick-up angle and consistent suspension alignment. 🔧 Features Genuine Team Losi Racing replacement parts Direct-fit bulkhead for 22X platforms Includes kick-up shims for proper front suspension geometry Ideal for repairs, rebuilds, or race-day spares 📦 Includes (1) Bulkhead (2) Kick-Up Shims ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Unlock precision tuning and serious weight savings with the Team Losi Racing 22X Carbon Fiber Battery Mount Set. Designed for racers who demand maximum performance, this ultra-lightweight upgrade delivers increased rigidity while allowing controlled chassis flex for improved handling consistency.                                          CNC machined from high-quality carbon fiber, this mount set provides a perfect fit and refined finish worthy of any competition build. The innovative braceless design helps enhance chassis flex characteristics, giving your 22X improved balance and responsiveness on high-grip surfaces. With adjustable front-to-rear battery positioning, you gain the freedom to fine-tune weight bias and dial in steering feel, rotation, and rear grip depending on track conditions. Whether you're chasing tenths on carpet or clay, this mount gives you tuning flexibility that matters.                          Features: Ultra-lightweight carbon fiber construction CNC machined for precise fitment Braceless design enhances chassis flex Adjustable front-to-rear battery positioning Clean, race-ready finish Includes: (1) Carbon Fiber Battery Mount Set Designed for serious racers looking to fine-tune balance, reduce weight, and maximize performance from their TLR 22X platform.

Read more less

Fine-tune your suspension and lower the center of gravity with the Team Losi Racing 22X Carbon Fiber Front Shock Tower (-2mm). This optional tuning part is designed for racers looking to adjust front-end response and handling on the 22X 2WD buggy platform. Features & Benefits: Optional -2mm shock tower lowers front shock mounting points Carbon fiber construction for lightweight strength and rigidity Helps fine-tune suspension geometry and handling characteristics Precision cut for accurate fit and consistent performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) -2mm Carbon Fiber Front Shock Tower A great tuning option for racers looking to dial in front-end feel and suspension performance on their 22X.    

Read more less

Restore strength and precision to the rear suspension of your 22X with the Team Losi Racing Carbon Fiber Rear Shock Tower. This standard replacement shock tower is designed specifically for the 22X 2WD buggy platform, delivering lightweight rigidity and consistent suspension performance. Features & Benefits: Carbon fiber construction for lightweight strength and durability Standard height replacement for factory rear suspension geometry Precision cut for accurate fit and reliable performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) Carbon Fiber Rear Shock Tower Perfect for replacing worn or damaged parts while keeping your 22X race-ready  

Read more less

Bellcrank Set Overview:The Team Losi Racing 22X Composite Steering Bellcrank Set is a direct replacement steering component designed to restore smooth, precise steering performance on your 22X buggy. Molded from durable composite material, this bellcrank set delivers reliable steering response while maintaining the lightweight characteristics racers expect from the 22X platform. 🔧 Key Features Direct replacement composite steering bellcrank set Durable composite construction for consistent performance Restores smooth and precise steering feel Designed specifically for the 22X platform 📦 Includes (1) Steering Bellcrank Set 🚗 Compatibility Team Losi Racing 22X platforms Perfect for routine maintenance or race-day repairs, this composite bellcrank set keeps your 22X steering system operating at peak performance.  

Read more less

The Team Losi Racing 22X DC Wide Steering Spindle Knuckles are genuine replacement components designed for the 22X DC 2WD buggy platform. These wide knuckles help maintain proper front-end geometry and durability while ensuring precise steering response and consistent performance on the track. Built to factory specifications, they provide a direct-fit solution for repairs or routine maintenance, keeping your 22X platform race-ready. Features Genuine TLR replacement parts Wide steering spindle design Maintains correct front-end geometry Durable construction for racing conditions Direct-fit compatibility Includes (2) Wide Steering Spindle Knuckles Compatibility Losi 22X Losi 22X-T A reliable replacement to keep your steering system tight, responsive, and competition-ready. 🏁  

Read more less

Add front-end stability and cooling performance to your race build with the Team Losi Racing 22X Front Low Wing & Fan Mount Set. Designed specifically for the 22X 2WD buggy platform, this set helps improve aerodynamic balance while providing a secure mounting solution for your motor cooling fan. The front low wing increases front downforce, helping improve steering feel and consistency on high-speed sections and high-grip surfaces. Paired with the included fan mount, this setup supports better motor cooling during long mains and hot race days, keeping performance consistent from start to finish. Whether you're refreshing worn components or dialing in your race setup, this is a must-have replacement for competitive 22X racers. Features: Genuine TLR replacement parts Improves front-end stability and steering feel Provides secure motor fan mounting Designed for competitive 22X setups Direct fit for 22X 2WD buggy platforms Includes: (1) Front Low Wing (1) Fan Mount Built for racers who want balanced aero performance and reliable cooling when it matters most.  

Read more less

The Team Losi Racing TLR-1194 Front Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens front sway bar set allows drivers to fine-tune front roll stiffness, helping balance steering response, corner entry feel, and overall chassis control for changing track conditions. A simple, effective tuning tool that works without altering springs or shock setup. 🔧 Features Genuine Team Losi Racing tuning option Front sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Enables fine adjustment of front chassis roll and steering feel Ideal for adapting to different grip levels and layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Front Sway Bars Set ✅ Compatibility Losi 22X  Losi 22X-T

Read more less

The Team Losi Racing TLR-1193 Front Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Odds front sway bar set allows drivers to fine-tune front roll stiffness, improving steering feel, corner entry balance, and overall responsiveness based on track conditions. An effective tuning option for dialing in front-end behavior without altering springs or shock package. 🔧 Features Genuine Team Losi Racing tuning option Front sway bar set for 22X 2WD buggy platforms Odds sway bar configuration Allows precise adjustment of front chassis roll and steering response Ideal for adapting to changing grip levels and track layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Front Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Keep your suspension moving smoothly and accurately with the Team Losi Racing 22X Hinge Pins Set. This genuine replacement set is designed for the 22X platform and is perfect for maintenance, rebuilds, or keeping essential spares on hand. Features & Benefits: Genuine Team Losi Racing replacement parts Precision manufactured for proper suspension alignment and smooth movement Restores factory fit and performance Compatibility: Team Losi Racing 22X Platform Includes: (1) Hinge pins set An essential replacement set to keep your 22X handling consistently and race-ready.      

Read more less

Protect your chassis and keep it looking factory fresh with the Team Losi Racing 22X Pre-Cut Chassis Protective Sheet. Designed specifically for the 22X platform, this peel-and-stick protector helps guard against scratches, scuffs, and wear from racing and practice—especially on abrasive track surfaces. Features & Benefits: Precision cut for a perfect fit on the TLR 22X chassis Durable surface protection against scrapes and wear Helps preserve chassis appearance and long-term performance Clean, professional look with official TLR branding Easy application that stays securely in place Includes: (1) 22X Pre-Cut Chassis Protective Sheet (Black) A simple upgrade that keeps your 22X protected and looking sharp race after race.  

Read more less

Maintain precise rear suspension geometry with the Team Losi Racing 22X Rear Camber Ball Stud Mount Block. This genuine replacement part is designed specifically for the 22X 2WD buggy platform and is ideal for repairs, rebuilds, or keeping spares in your pit box. Features & Benefits: Genuine Team Losi Racing replacement component Maintains proper rear camber link positioning and suspension geometry Precision molded for accurate fit and reliable performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) Rear camber ball stud mount block A must-have replacement to keep your 22X suspension dialed and consistent race after race.    

Read more less

Upgrade your 22X with precision-engineered Stiffezel rear suspension arms for enhanced control, reduced flex, and improved handling on high-bite tracks. Designed for serious racers, these 75mm arms deliver extra rigidity and durability to dominate high-traction surfaces. 🔧 Features:✅ Stiffer than stock for more precise handling✅ Reduced flex improves suspension response✅ Optimized for high-traction surfaces✅ Increased durability for aggressive racing 📦 Includes:• (2) 22X Stiffezel Rear Suspension Arms (75mm) 🚗 Compatibility:• TLR 22X Get the control and consistency you need with this must-have upgrade for competitive racing.

Read more less

The Team Losi Racing TLR-1212 Rear Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens sway bar set allows drivers to fine-tune rear roll stiffness to better suit track grip levels, driving style, and layout demands. A simple and effective way to adjust handling balance without changing springs or shock settings. 🔧 Features Genuine Team Losi Racing tuning option Rear sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Allows fine adjustment of chassis roll and cornering response Ideal for adapting to changing track conditions ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Rear Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less