Fine-tune your RC10B74.2’s rear suspension geometry with this Rear Gearbox Adjustable Height Insert Set. Whether you're dialing in anti-squat or adjusting rear drive angles, these inserts give you the flexibility to get the most out of your setup. 📌 Key Features: Precision-molded plastic insert set Allows for rear gearbox height adjustment Fine-tune rear suspension geometry and anti-squat Designed specifically for RC10B74.2 and RC10B74.2D platforms 📦 Includes: Multiple insert pairs for adjustable configurations Designed to work with standard rear gearbox components ✅ Compatibility: RC10B74.2 RC10B74.2D Ideal for racers looking to squeeze out extra performance on varying track conditions — essential for serious 1/10 4WD competition setups.

Read more less

This is a pack of two replacement Team Associated RC10B74 Rear Hub Hinge Pins.  COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D

Read more less

🏆 Stronger, Straighter, FasterThe “A” Arm Mount for the RC10B84 is a precision CNC-machined aluminum upgrade that replaces the stock plastic piece. Built to handle the toughest racing conditions, this mount locks in suspension geometry for consistent camber and toe, helping your buggy track straighter and corner sharper. ⚙️ Features: ✅ CNC-machined aluminum for superior durability ✅ Precision hinge-pin alignment ensures consistent suspension setup ✅ Anodized finish resists wear and adds a pro look ✅ Direct replacement for the stock “A” mount 📦 Includes: (1) RC10B84 “A” Arm Mount 💡 Pro Tip: Combine the A, B, and C aluminum arm mounts for a fully upgraded rear suspension package — maximizing both strength and precision.  

Read more less

🏁 Durability Meets PrecisionUpgrade your RC10B84 with the “B” Arm Mount, crafted from CNC-machined aluminum for superior strength and accuracy. This high-performance replacement ensures consistent suspension geometry under stress, giving you sharper handling and rock-solid reliability on the track. ⚙️ Features: ✅ CNC-machined aluminum construction for maximum strength ✅ Precision hinge-pin alignment maintains suspension geometry ✅ Anodized finish adds durability and a pro-level look ✅ Direct fit replacement for the stock plastic “B” mount 📦 Includes: (1) RC10B84 “B” Arm Mount 💡 Pro Tip: Pair the “B” and “C” aluminum mounts for a balanced upgrade that improves both durability and consistency across your rear suspension.  

Read more less

🏎️ Factory Team Suspension UpgradeStep up your B84’s rear suspension with the Factory Team blue aluminum “C” arm mount. This precision-machined part replaces the stock plastic mount to deliver greater rigidity, tighter tolerances, and a clean anodized finish that looks as good as it performs. ⚙️ Features: ✅ Lightweight blue anodized aluminum for strength and corrosion resistance ✅ Improves suspension rigidity for consistent geometry under load ✅ Factory Team upgrade for race-grade durability and handling ✅ Direct replacement for the RC10B84 stock "C" mount 📦 Includes: (1) RC10B84 "C" Arm Mount (Blue Aluminum) 💡 Pro Tip: For best results, pair this upgrade with the correct suspension inserts from Associated to fine-tune your setup for track conditions.    

Read more less

Pro-Level Power. Championship Precision. The RC10B84 from Team Associated is engineered to dominate the track. Built for competitive 1/10-scale 4WD off-road racing, this next-generation buggy kit delivers a lethal combination of precision, adjustability, and durability—perfectly suited for high-traction carpet surfaces and adaptable to changing race conditions. With its height-adjustable gearboxes, long-arm suspension geometry, and 2.5mm 7075-T6 aluminum chassis, the RC10B84 is designed to give racers the ultimate edge in handling and speed. From optimized bump steer control to a decoupled slipper clutch and 13mm big-bore shocks, every detail is tuned for elite performance. Key Features:• Molded front & rear height-adjustable gearboxes• Long-arm suspension geometry for improved grip• Optimized bellcranks & steering rack to reduce bump steer• Adjustable front & rear chassis bracing• Standard & HRC rear hubs for fine-tuned control• Forward/rearward motor mount options• Adjustable battery tray with tool-free thumb tabs• 2.5mm thick 7075-T6 aluminum chassis with 10° kickup• Decoupled slipper clutch for smoother power transfer• 13mm big-bore shocks with shock tower covers Includes:• (1) RC10B84 1/10 4WD Off-Road Electric Buggy Kit (Carpet)• (1) Instruction Manual Needed to Complete:• 1/10-scale electric motor & ESC• 2S LiPo Shorty Battery (7.4V–7.6V)• Compatible LiPo charger• 2-channel surface radio system & steering servo• 1/10 off-road wheels & tires• Polycarbonate-safe paint for body• AA batteries for transmitter• Tools & silicone fluids Specifications:• Scale: 1/10• Drive: 4WD• Power Source: 2S LiPo (Shorty)• Length: 15.55 in (395 mm)• Assembly: Unassembled kit• Use: Designed for high-traction carpet tracks Note: This is a competition-level kit. Assembly, electronics, and accessories are required and sold separately. Ready to win? Build the RC10B84 and push your race program to the next level. 🏁

Read more less

🏆 Fine-Tune Your Handling – Dial in your RC10B84 with the Factory Team Anti-Roll Bar Set. Designed to reduce chassis roll and increase stability, this kit gives racers the precision needed to handle high-speed corners with confidence. ⚙️ Features:✅ Multiple bar options for customizable roll stiffness✅ Improves cornering consistency and reduces body roll✅ Factory Team precision parts for smooth, efficient operation✅ Direct fit upgrade for the RC10B84 platform 📦 Includes: Complete Anti-Roll Bar Set with multiple stiffness options Hardware for installation 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use a stiffer bar on high-grip tracks to control traction rolling, and a softer bar on looser surfaces to maximize rear grip.  

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Team Associated RC10B84 Body – Clear (92554) 🏁 Race-Optimized Replacement – Designed specifically for the RC10B84 platform, this low-profile clear body delivers improved aerodynamics and the clean, aggressive Factory Team look. Perfect for racers who want both performance and a fresh canvas for custom paint schemes. ⚙️ Features:✅ Low-profile design for enhanced aerodynamics✅ Molded from durable, lightweight polycarbonate✅ Clear shell – ready for your custom paint job✅ Factory Team fit and finish for competitive racing 📦 Includes: (1) Clear RC10B84 Body (unpainted) 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair this body with lightweight wing options to further dial in downforce and stability for your track conditions.    

Read more less

🏁 Restore or Upgrade Your Steering PrecisionThe RC10B84 Caster Block Set is a direct replacement designed to keep your buggy’s front-end geometry tight and consistent. Whether you’re replacing worn parts or refreshing your ride for peak performance, these caster blocks ensure smooth, predictable steering and durability under racing conditions. ⚙️ Features: ✅ Factory-spec replacement for the RC10B84 platform ✅ Maintains precise caster angle and suspension geometry ✅ High-strength molded composite construction ✅ Designed for durability and consistent steering response 📦 Includes: (1) Left Caster Block (1) Right Caster Block 💡 Pro Tip: Always inspect hinge pins and kingpins when replacing caster blocks—worn hardware can affect steering accuracy just as much as the blocks themselves.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

🏁 Precision Factory FitThe RC10B84 Center Bulkhead (DSC) is a genuine replacement part designed for the Direct Spool Configuration. It provides the secure mounting point for the center drivetrain components, ensuring reliable alignment and smooth power transfer through demanding race conditions. ⚙️ Features: ✅ Direct replacement for the RC10B84 (DSC configuration) ✅ Maintains precise drivetrain geometry and alignment ✅ Built from high-quality, durable materials ✅ Designed for competitive performance and long-lasting strength 📦 Includes: (1) RC10B84 Center Bulkhead (DSC) 💡 Pro Tip: Use alongside the ASC92530 Center Bulkhead Brace (DSC) for maximum rigidity and drivetrain stability.        

Read more less

🛡️ Strength Where It CountsThe RC10B84 Center Bulkhead Brace (DSC) is a precision Factory Team component designed to reinforce the drivetrain area, helping your buggy stay rigid and balanced under racing loads. With the Decoupled Slipper Clutch (DSC) system, this brace maintains alignment and reduces chassis flex for more consistent performance. ⚙️ Features: ✅ Factory Team upgrade – engineered for race-level durability ✅ Designed specifically for the DSC drivetrain configuration ✅ Reinforces center bulkhead to maintain driveline stability ✅ CNC-machined aluminum with anodized finish for strength & style 📦 Includes: (1) RC10B84 Center Bulkhead Brace (DSC) 💡 Pro Tip: Run this with the FT Molded Ring & Pinion Set (ASC92543) to maximize drivetrain smoothness and strength in your B84.      

Read more less

⚡ Keep the Power Flowing – Replace or upgrade your drivetrain with the Factory Team 102mm Center CVA Bone for the RC10B84. Precision-machined for smooth rotation and durability, this part ensures consistent power transfer through your buggy’s center driveline. ⚙️ Features:✅ 102mm length – designed specifically for the RC10B84✅ Precision-machined for smooth, efficient drivetrain performance✅ Strong, durable construction for long-lasting use✅ Factory Team quality for competitive racing 📦 Includes: (1) 102mm Center CVA Bone 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Always check for wear at the pins and outdrives—swapping CVA bones before they fail helps protect more expensive drivetrain parts.    

Read more less

⚙️ Precision Drivetrain Component – Keep your RC10B84 running smooth with the Factory Team 38.5mm Center CVA Bone. Designed for a perfect fit, this part ensures efficient power transfer and durability under the rigors of racing. ⚙️ Features:✅ 38.5mm length – engineered specifically for the RC10B84✅ Precision-machined for consistent, smooth drivetrain performance✅ Durable construction for long-lasting reliability✅ Factory Team grade for serious racers 📦 Includes: (1) 38.5mm Center CVA Bone 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Keep a spare set of center CVA bones in your pit box — they’re small, lightweight, and can save your main if a drivetrain failure happens mid-race.  

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

🏆 Factory Team Precision, Race-ReadyThe Team Associated RC10B84 Factory Team Bearing Set delivers premium performance with low-friction, high-durability bearings designed to keep your B84 running smooth and efficient. Built to withstand the demands of top-level racing, these bearings reduce drag, improve drivetrain efficiency, and extend longevity. ⚙️ Features: Genuine Factory Team high-performance bearings Sealed design for reduced maintenance and longer life Enhances drivetrain smoothness and efficiency Direct fit for the RC10B84 platform 📦 Includes: Complete Factory Team Bearing Set for RC10B84 💡 Pro Tip: Keep an extra bearing set in your pit bag—swapping in fresh bearings before big events can be the difference between a podium finish and a DNF.  

Read more less

Upgrade your buggy’s performance with the Team Associated RC10B84 Factory Team Carbon Chassis Brace Set. Designed for the RC10B84 1/10 4WD Off-Road Electric Buggy Kit, this optional Factory Team upgrade delivers increased chassis rigidity without adding unnecessary weight. ✅ Rigid & Lightweight – Carbon construction improves stiffness while keeping weight low✅ Enhanced Handling – Added rigidity boosts steering response and overall control✅ Factory Team Quality – Precision-engineered to fit seamlessly✅ Easy Installation – A practical upgrade for serious racers Includes: (1) RC10B84 Factory Team Carbon Chassis Brace Set Compatibility: Team Associated RC10B84  

Read more less

🏁 Increased Rigidity for Consistent Drivetrain PerformanceThe Team Associated RC10B84 Factory Team Carbon Front Gearbox Set is an optional upgrade designed to improve drivetrain precision and durability on the RC10B84 and RC10B84D platforms. Constructed from performance-proven carbon composite, this gearbox reduces flex found in standard components, helping maintain proper drivetrain alignment and consistent handling under racing conditions. Built for racers looking to maximize reliability and performance on high-grip tracks. ✅ Performance-proven carbon composite construction✅ Designed for RC10B84 and RC10B84D platforms✅ Reduces flex for improved drivetrain alignment✅ Enhances durability and strength✅ Improves handling consistency on track 📦 Includes:(1) RC10B84 Factory Team Carbon Front Gearbox Set 💡 Pro Tip: When installing drivetrain upgrades, inspect bearings and gear mesh to ensure smooth operation and maximum performance.  

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

⚙️ Precision Front Drivetrain HousingThe Team Associated RC10B84 Front Gearbox is a direct replacement part engineered to keep your buggy’s front drivetrain running smoothly. Made from durable composite material, this gearbox housing ensures proper alignment of your front diff and gears, maintaining consistent performance under the rigors of racing. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded composite construction ✅ Keeps gears and differential securely in place ✅ Restores drivetrain efficiency after wear or damage 📦 Includes: (1) Front Gearbox Housing    

Read more less

🔧 Precision Steering Control – Keep your B84’s front end dialed with the Factory Team Front Hubs. Designed for durability and tuning flexibility, these hubs ensure consistent steering response and smooth suspension geometry under race conditions. ⚙️ Features:✅ Precision-molded for a perfect fit on the B84 platform✅ Multiple camber link mounting holes for fine-tuned steering feel✅ Durable construction for long-lasting performance✅ Factory Team quality parts for competitive-level racing 📦 Includes: (1) Left Front Hub (1) Right Front Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use the inner camber link holes for more aggressive steering on tight tracks, and the outer holes for smoother, more stable cornering.

Read more less

📌 Restore Factory Suspension PerformanceThe Team Associated RC10B84 Front Shock Tower is a direct replacement part designed specifically for the B84 platform. Built to factory specs, this tower keeps your suspension geometry true, ensuring consistent handling and durability on the track. ⚙️ Features: Precision-molded for a direct RC10B84 fit Maintains correct suspension geometry Strong and lightweight construction Ideal replacement for worn or damaged shock towers 📦 Includes: (1) RC10B84 Front Shock Tower 💡 Pro Tip: Keep both front and rear shock towers in your pit box—having spares on hand is the fastest way to recover from a hard crash and get back in the race.  

Read more less

🔧 Strong, Precise, Race-ReadyThe Team Associated RC10B84 Front Suspension Arms are precision-molded replacement components built to handle the rigors of competitive racing. Designed specifically for the B84 platform, these arms deliver the perfect balance of strength, flexibility, and lightweight performance to maintain consistent handling and durability under extreme conditions. ⚙️ Features: ✅ Direct fit replacement for RC10B84 ✅ Molded composite construction for durability and controlled flex ✅ Maintains proper suspension geometry for predictable handling ✅ Perfect for racers needing fresh arms or spares 📦 Includes: (1) Pair of Front Suspension Arms  

Read more less

🏁 Factory Team Efficiency UpgradeSwap in the Factory Team molded ring & pinion to reduce rotating mass and keep your B84’s diff running smooth and quiet. Precision-molded tooth profiles deliver consistent mesh and improved drivetrain efficiency. ⚙️ Features: ✅ Molded construction for lighter rotational mass and quieter operation ✅ Factory Team quality for precise tooth geometry and smooth mesh ✅ Direct fit for the RC10B84 differential ✅ Ideal spare or performance swap for efficiency-focused setups 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear 💡 Pro Tip: Great for stock-class efficiency. If you run high-power/mod setups, keep an eye on wear and diff shim settings to maintain a perfect mesh.  

Read more less

💪 Lightweight Strength for Precision Tuning – Upgrade your B84 with the Factory Team Titanium Turnbuckle Set. Built from premium titanium, these turnbuckles reduce weight while maintaining strength, giving racers more responsive handling and durability on the track. ⚙️ Features:✅ CNC-machined titanium construction – lighter than steel, stronger than aluminum✅ Factory Team quality for top-level racing✅ Improves suspension adjustability and responsiveness✅ Direct fit for the RC10B84 📦 Includes: Complete Titanium Turnbuckle Set for the RC10B84 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Combine titanium turnbuckles with Factory Team ball cups for ultra-smooth adjustments and consistent geometry in long mains.    

Read more less

💪 Heavy-Duty Drivetrain Upgrade – Built for strength and endurance, the Factory Team 71mm HD CVA Bones deliver reliable power transfer under the toughest racing conditions. Perfect for high-grip tracks where durability and smooth operation are critical. ⚙️ Features:✅ 71mm heavy-duty design for added strength✅ Precision-machined for smooth, efficient performance✅ Withstands the demands of competitive racing✅ Factory Team quality ensures long-lasting reliability 📦 Includes: (2) 71mm HD CVA Bones 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair HD CVA Bones with new outdrives during installation — mixing old and new parts can accelerate wear and reduce efficiency.  

Read more less

⚡ Durability Where It Matters – Take your drivetrain to the next level with the Factory Team LTC Metal Differential Set for the B84. Designed to withstand the demands of top-tier racing, these precision-machined diffs deliver smooth, consistent power transfer and extended life. ⚙️ Features:✅ Complete front & rear metal differentials for maximum durability✅ Longer wear life than composite options✅ Factory Team precision for smoother operation✅ Engineered specifically for the RC10B84 📦 Includes: (1) Front LTC Metal Differential Assembly (1) Rear LTC Metal Differential Assembly 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair with Factory Team diff fluids to fine-tune traction and stability based on track grip levels.

Read more less

⚡ Secure Power TransferThe Team Associated RC10B84 Motor Mount is a precision-engineered replacement part designed to keep your motor solidly in place while maintaining exact gear mesh and drivetrain alignment. Built for the rigors of high-performance racing, this mount ensures your buggy runs smooth, efficient, and consistent on the track. ⚙️ Features: ✅ Direct fit for the RC10B84 ✅ CNC-machined aluminum for strength and durability ✅ Provides accurate motor positioning and gear mesh ✅ Race-proven Factory Team quality and finish 📦 Includes: (1) RC10B84 Motor Mount    

Read more less

Team Associated RC10B84 Rear Gearbox – ASC92511 ⚙️ Durable Rear Drivetrain HousingThe Team Associated RC10B84 Rear Gearbox is a genuine replacement part designed to restore strength and precision to your buggy’s drivetrain. Molded from high-quality composite material, this housing keeps your differential, gears, and driveshafts properly aligned under the toughest racing conditions. 🔧 Features: ✅ Direct fit replacement for RC10B84 ✅ High-strength molded composite construction ✅ Maintains gear alignment and drivetrain efficiency ✅ Essential for restoring performance after wear or crash damage 📦 Includes: (1) Rear Gearbox Housing  

Read more less

🏁 Stronger, Smarter Suspension – Keep your RC10B84 handling sharp with the Factory Team Rear Hubs. Designed for precision and durability, these hubs maintain wheel alignment under load while giving you the tuning options needed to adapt to any track. ⚙️ Features:✅ Precision-molded for a perfect factory fit✅ Multiple camber link mounting options for quick tuning✅ Strong, durable construction built for competitive racing✅ Factory Team grade components for long-lasting reliability 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Experiment with upper camber link positions on the hubs — lower holes increase traction, while higher ones improve stability on high-grip tracks.

Read more less

🔧 Restore Rear-End Structure – The RC10B84 Rear Shock Tower is a direct replacement part designed to bring your buggy back to factory specifications. It ensures consistent suspension geometry and handling after wear, damage, or heavy use. ⚙️ Features:✅ Direct replacement for the stock RC10B84 rear shock tower✅ Maintains suspension geometry and stable handling✅ Durable composite construction for long-lasting performance✅ Designed for easy fit and reliability 📦 Includes: (1) RC10B84 Rear Shock Tower 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Consider keeping an extra shock tower on hand — they’re a common part to break in hard landings, and a quick swap can save your race day.  

Read more less