Team Associated RC10B6.2 Rear Suspension Arm, 73mm (91885)Upgrade or replace your buggy's rear end with this 73mm rear suspension arm designed for the RC10B6.2. Engineered for optimal durability and race-ready performance, it's a direct replacement part that keeps your handling sharp and consistent. ✅ Official Replacement – For the RC10B6.2✅ 73mm Length – Ideal for specific tuning setups✅ Durable Composite Material – Built to handle high-impact racing✅ Precision Molded – Ensures consistent fit and suspension geometry 📦 Includes:– (1) Rear Suspension Arm, 73mm Perfect for spares or to replace a worn or damaged arm. Get your buggy dialed in and back on track!

Read more less

Upgrade your rear-end setup with precision and strength! This wide gull-wing carbon fiber rear shock tower is designed to optimize shock positioning for increased stability and rear traction, especially in high-bite track conditions. A direct replacement part for B6.3 and B6.3D platforms, it’s lightweight, ultra-durable, and race-proven. ✅ Key Features: High-quality carbon fiber construction for superior strength and reduced flex Wide gull-wing geometry enhances suspension performance and tuning range Lightweight upgrade with professional-level reliability Direct replacement with factory fit and finish 📦 Includes: (1) Carbon Fiber Wide Gull-Wing Rear Shock Tower 🔧 Compatibility: Team Associated RC10B6.3 Team Associated RC10B6.3D Pair it with the front gull-wing tower (#91880) for maximum performance and chassis balance.

Read more less

Elevate your buggy’s precision with rugged carbon fiber strength. The gullwing design enhances rigidity and adjusts preload handling, giving you sharper steering, better consistency, and upgraded durability—especially suited for high-grip surfaces. ✅ Key Features: Lightweight carbon fiber construction for maximum stiffness and minimal flex Gullwing shape for enhanced shock mounting geometry and tuning versatility Bolt-in upgrade for sharper turn-in and better bump handling Reduces chassis flex under braking and steering loads 📦 What's Included: (1) Carbon Fiber Gullwing Front Shock Tower 🔧 Compatibility: Designed to fit all the following Team Associated 1/10 4WD buggy chassis: RC10B6 Original RC10B6.3 / B6.3D RC10B6.4 / B6.4D RC10B6D Upgrade your front-end with pro-level shock positioning and reliable strength—perfect for high-level club racers and serious competitors.  

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Upgrade your RC10B6.3’s drivetrain with the Heavy Duty (HD) Slipper Spring and Adapters from Team Associated. Engineered for improved durability and consistent slipper performance, this set is ideal for racers pushing their vehicles to the limit on high-traction surfaces. 🔥 Key Features: Heavy duty slipper spring for increased pressure and durability Includes updated slipper adapters for optimized fit and function Designed for smoother and more consistent slipper operation Direct replacement for the stock B6.3 slipper components ✅ Compatibility: RC10B6.3 RC10B6.3D May also fit other RC10B6-series models with similar slipper configurations 📦 Includes: (1) HD Slipper Spring (2) Slipper Adapters ⚠️ Note:Ensure proper slipper assembly for optimal performance. Refer to your vehicle’s manual for installation instructions.

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks (Carbon) [91985] 🛠️ Precision Meets Performance 💨 Upgrade your front end with this Carbon -1mm Scrub Caster & Steering Block Set for the RC10B6.4 and B6.4D. Built for racers who want rigidity, adjustability, and the ultimate in high-traction control. Carbon construction = serious stiffness. 🔥 ✅ Rigid carbon for a more responsive suspension✅ Includes multiple caster insert options for fine-tuning✅ -1mm scrub radius for quicker steering feel✅ Built for B6.4 / B6.4D platforms Includes:(2) Carbon Caster Blocks(4) Carbon Steering Blocks(2) +/- 0° Caster Inserts(2) +/- 2.5° Caster Inserts(2) +/- 5° Caster Inserts(2) Shims 📦 Part Number: 91985🚗 Brand: Team Associated

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks – ASC91901🛞 Precision Steering Just Got an Upgrade Fine-tune your front-end handling with the Team Associated -1mm Scrub Caster & Steering Block set for the RC10B6.4 and B6.4D! Whether you're chasing max steering feel or dialing in a tighter line through corners, this kit delivers the flexibility you need. The included caster inserts let you tweak your setup in seconds, giving you full control over how your buggy handles on any track. ✅ Designed specifically for B6.4 and B6.4D✅ Adjustable camber with multiple caster insert options✅ Lightweight and durable AE factory-grade components✅ Great for high-traction tuning or steering sensitivity adjustments 📦 Includes:• (2) Caster Blocks• (4) Steering Blocks• (2) +/- 0° Caster Inserts• (2) +/- 2.5° Caster Inserts• (2) +/- 5° Caster Inserts• (2) Shims 🔢 Part Number: ASC91901🏁 Brand: Team Associated

Read more less

Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974

Read more less

Team Associated RC10B6.4 13mm Shock Rod End Set [91997] 🔧 Small Part. Big Performance. 💥 Keep your suspension dialed with the 13mm Shock Rod End Set for the RC10B6.4. Whether you're replacing worn parts or fine-tuning your ride, these rod ends are built to factory spec and ready to race. ✅ Designed for 13mm shocks✅ Precision fit for smooth performance✅ Durable molded construction✅ Perfect for rebuilds or spares Includes:(1) 13mm Shock Rod End Set 📦 Part Number: 91997🔧 Brand: Team Associated🏁 Fits: RC10B6.4 & B6.4D platforms

Read more less

Team Associated RC10B6.4 Factory Team Angled Top Plate & Ballstud Mount (Carbon) [71183]🔧 Lighter. Stiffer. Tuned for Victory.Upgrade your RC10SC6.4 or RC10T6.4 with this Factory Team Angled Top Plate & Ballstud Mount made from ultra-rigid carbon composite. Designed for racers who demand precision and tuning flexibility, this lightweight mount gives your rig an edge on varying track surfaces. 💥 Features:✅ Lightweight carbon composite for reduced flex and added durability✅ Angled design offers enhanced tuning options✅ Factory Team quality – built for performance✅ Ideal for RC10SC6.4 and RC10T6.4 platforms✅ Includes: (1) Top Plate & Ballstud Mount📦 Part Number: 71183🏁 Brand: Team Associated

Read more less

Team Associated RC10B6.4 Factory Team Steering Bell Cranks – Durable Precision Steering! 🔧🔥 Upgrade your steering system with the Team Associated Factory Team Bell Cranks for the B6.4 and B7 platforms! Built to withstand the demands of high-level competition, these aluminum bell cranks improve steering response and add long-lasting strength to your front end. Whether you're looking for added rigidity or simply replacing worn parts, this Factory Team upgrade keeps your steering sharp and consistent. ⚙️ Key Features: ✅ Factory Team Quality – Built for race-level durability and precision✅ Rigid Steering Geometry – Reduces flex for consistent input✅ Aluminum Construction – Lightweight and strong for high-performance use✅ Direct Fit – Designed for seamless installation on multiple AE buggies 📦 Includes: (2) Aluminum Bell Crank Arms ✅ Compatibility: Team Associated RC10 B7 Original Team Associated RC10 B7D Team Associated RC10 B6.4 Team Associated RC10 B6.4D 🏁 Reinforce your front end and steer with confidence — upgrade to Factory Team bell cranks today! 🔵💨

Read more less

Upgrade or replace with precision using the Team Associated RC10B6.4 Front Bulkhead Set, featuring both 0° and 2.5° kick-up options. This set is a direct replacement for the B6.4 front bulkhead and offers adjustability to fine-tune your front-end geometry depending on track conditions and driving style. 📦 Includes: (1) 0° Front Bulkhead (1) 2.5° Front Bulkhead 📌 Compatibility: Team Associated RC10B6.4 RC10B6.4D May also be compatible with other B6 series models with slight adjustments 🔧 Key Benefits: Multiple kick-up angles for tuning front-end response High-quality composite material for durability Factory Team precision fitment and finish Ideal for racers looking to customize handling feel on entry and through corners. Keep both angles on hand and swap as needed to match the track!

Read more less

Fine-tune your RC10B6.4 with this comprehensive tuning and hardware set from Team Associated. The #91978 Factory Team accessory pack includes everything needed to install a front wing, fan mounts, and adjust your battery brace height—all in one convenient kit. 📦 Includes: (1) Front Wing Mount (2) Fan Mounts (1) Battery Brace Shim Necessary hardware ⚙️ Key Features: Direct fit for RC10B6.4 and RC10B6.4D models Optional tuning parts to optimize airflow, improve downforce, and enhance cooling Lightweight and durable composite materials Designed by Team Associated for maximum performance & reliability This kit is perfect for racers who want to dial in their setup for competitive advantage. Whether you're aiming for better aerodynamics or more efficient motor cooling—this set has you covered.

Read more less

Restore precision steering to your B6.4 or B6.4D with this genuine Team Associated replacement set. The kit includes two steering bell cranks and a steering rack, designed to keep your front-end dialed in and race-ready. 🔧 Features: Direct replacement for the RC10B6.4 and B6.4D Includes (2) bell cranks and (1) steering rack Durable, race-proven design ✅ Compatibility: RC10B6.4 RC10B6.4D Ideal for racers who want tight, responsive steering and long-lasting performance.

Read more less

  Team Associated RC10B7 1/10 2WD Off-Road Buggy Kit – Next-Generation Championship Performance! Celebrating 40 years of championship-winning innovation, the Team Associated RC10B7 is the next evolution in 1/10 2WD electric buggy racing. Featuring a new long-arm suspension geometry, centralized electronics layout, KPI adjustable steering blocks, and an advanced high-grip setup, this buggy delivers faster lap times, increased corner speed, and an easier-to-drive feel than ever before. Designed for carpet, AstroTurf®, and high-grip sealed clay tracks, the RC10B7 is engineered for peak performance and tunability, making it the ultimate choice for racers looking to dominate the competition. Key Features: ✅ 5-Gear Laydown Transmission – Low-profile motor mount shifts weight closer to the center for optimal balance.✅ Long-Arm Suspension Geometry – Improves grip and predictability in all conditions.✅ KPI Adjustable Steering & Caster Blocks – Includes three tuning options for precise steering feel.✅ Vertical Front Outer Ballstud – Allows fine adjustments to roll center, camber gain, and link length.✅ Height-Adjustable Aluminum Front Bulkhead – Further tuning of front roll center for enhanced stability.✅ Standard & HRC (High Roll Center) Rear Hubs – Maximizes control on high-grip surfaces.✅ Easy Access Front & Rear Anti-Roll Bars – Quick tuning for optimized weight transfer.✅ High-Volume Gear Differential – Delivers consistent performance over long runs, fits LTC gears from the RC10B74.2.✅ Adjustable Battery Holder with Thumb Tabs – Fine-tune weight bias while allowing easy battery removal.✅ 7075-T6 Aluminum Chassis – Increased departure angle & optional weight plate pockets for precision handling.✅ 6.5mm Aluminum Front Axle – Enhances stability and grip with slim front wheels and low-profile tires.✅ HD 69mm CVA Bones & Differential Outdrives – Improved durability for intense competition.✅ Lightweight Molded Servo Mount – Reduces weight while ensuring precision.✅ One-Piece Rear Wing Mount – Boosts durability during aggressive racing.✅ New 7-Inch Rear Wing & 2.5-Inch Front Wing – Enhances downforce and stability.✅ Low-Profile Body – Aerodynamic design optimized for high-speed handling.✅ Shock Tower Covers (Front & Rear) – Protects suspension components and extends longevity.✅ 3.5mm Turnbuckles & Ballcups – Provides rigidity and durability for precise handling. Precision Engineering for Maximum Performance 🛠 Advanced Suspension & Handling: Long-arm geometry delivers enhanced grip and predictability, improving cornering speed and lap times. Multiple steering and roll center tuning options allow racers to fine-tune their setups for maximum control. Updated suspension hubs, caster blocks, and ballstud placement provide unparalleled adjustability. ⚙️ Next-Generation Drivetrain & Power Delivery: New 5-gear laydown transmission moves the motor’s weight closer to the center, improving stability and weight distribution. High-volume gear differential enhances long-term consistency for extended runs. Easy access anti-roll bars allow for quick adjustments based on track conditions. 🚀 Factory-Optimized for High-Grip Surfaces: New low-profile body design reduces drag and improves aerodynamic efficiency. 7-inch rear wing & 2.5-inch front wing increase downforce for improved traction and control. 7075-T6 aluminum chassis ensures strength, rigidity, and precise handling characteristics. In the Box: (1) Team Associated RC10B7 1/10 2WD Buggy Kit (1) Clear Low-Profile Body & Wings (1) Manual Needed to Complete: Electronic Speed Control (ESC) 1/10 Scale Electric Motor Steering Servo 2-Channel Transmitter & Receiver System 7.4V-7.6V 2S LiPo Battery Compatible Battery Charger 1/10 Scale Off-Road Buggy Wheels & Tires Lexan-Spray Paint for Body Assembly Tools (Body Scissors, Reamer, Hobby Knife, Pliers, Wire Cutters, Soldering Iron, Calipers) Specifications: Scale: 1/10 Drive: 2WD Chassis: 7075-T6 Aluminum Wheelbase: Adjustable Weight: Varies with electronics Internal Gear Ratio: TBD Power Source: Electric Input Voltage: 7.4V-7.6V (2S LiPo) Assembly Level: Kit 🚨 Note: This is an unassembled RC kit requiring assembly, electronics, and other racer-provided components. Photos of the assembled kit are for illustrative purposes only. 40 Years of Champions – The Ultimate Racing Evolution! 🏆 Team Associated has led the 1/10 2WD racing scene for over four decades, and the RC10B7 continues that legacy. With enhanced grip, superior tunability, and race-ready durability, this buggy is designed to push the limits of competitive racing. 🔥 Get your RC10B7 today and experience next-generation championship performance! 🏁💨

Read more less

Team Associated RC10B7 6.5mm Aluminum Front Axles (2) – Lightweight Strength for Precision Racing! 🔩 Refresh your buggy’s front-end performance with the Team Associated RC10B7 6.5mm Aluminum Front Axles!Designed as a direct replacement for the RC10B7, these lightweight aluminum axles reduce rotating mass for quicker acceleration and sharper handling without sacrificing durability. ✨ Key Features: 🔩 Lightweight 6.5mm Aluminum Construction – Reduces unsprung weight for faster response and improved handling 🏁 Direct Replacement Design – Perfect fit for Team Associated RC10B7 🛡️ Durable and Race-Ready – Built to withstand the rigors of competitive off-road racing 🔧 Precision Machined – Ensures smooth performance and proper fit with your hubs and bearings 📦 Includes: ✔ (2) 6.5mm Aluminum Front Axles 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D ✅ Team Associated DC10 Drift Car 📌 Note: 🔹 Use with standard RC10B7 hub assemblies.🔹 A great upgrade for racers looking to shave weight and enhance steering precision. 🏁 Boost your buggy’s front-end performance with the Factory Team Aluminum Front Axles! 🔥 Race lighter and faster with the quality you expect from Team Associated! 🔥

Read more less

Team Associated RC10B7 8mm Blue Aluminum Shock Bushings – Lightweight & Durable 🔩 Keep your suspension functioning smoothly with Team Associated RC10B7 8mm Blue Aluminum Shock Bushings. Designed as a direct replacement for the RC10B7 and RC10B7D buggies, these anodized aluminum bushings offer precise fitment and durable performance without the added weight of steel. 🔧 Key Features: ✅ Lightweight blue anodized aluminum construction✅ Maintains proper shock alignment for consistent handling✅ Simple, drop-in replacement for stock bushings✅ Designed specifically for RC10B7 platforms 📦 Includes: (2) 8mm Aluminum Shock Bushings (Blue) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Reliable suspension starts with the right components.Upgrade your RC10B7 with these precision aluminum shock bushings and keep your rig race-ready! 🏁  

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

Overview:Upgrade your suspension durability and precision with the Team Associated RC10B7 Aluminum Arm Mount "D Block". Machined from high-quality aluminum, this mount improves rigidity in the rear suspension assembly, keeping your hinge pins firmly aligned under heavy loads. It’s a race-proven upgrade that enhances consistency, handling, and longevity compared to the stock composite part. Features: CNC-machined aluminum construction for superior strength Maintains precise hinge pin alignment for consistent handling Blue anodized finish for durability and Factory Team looks Direct replacement upgrade for the stock “D Block” Genuine Team Associated Factory Team component Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (check manual for details) Includes: (1) Aluminum Arm Mount "D Block" Part Number: 92433 ⚡ Pro Tip: Combine the Aluminum Arm Mount "D Block" with the B7 Factory Team Arm Mount Inserts (92434) to unlock fine-tuned rear suspension geometry options.

Read more less

Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm) – Precision Rear Geometry Upgrade 🔧 Fine-tune your rear suspension geometry with the Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm). These mounts offer a +1mm vertical adjustment to the hub link position, helping you dial in rear traction and handling response. Built from lightweight aluminum for durability and performance, they’re a great replacement or upgrade for your RC10B7 or RC10B7D. 🔧 Key Features: ✅ CNC-machined aluminum construction for strength and precision✅ +1mm hub link height adjustment for fine-tuned handling✅ Direct replacement for stock hub link mounts✅ Easy installation for race-day tuning 📦 Includes: (2) Aluminum Hub Link Mounts (+1mm) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Enhance your rear suspension setup with lightweight adjustability.Upgrade to these +1mm aluminum hub link mounts and take control of your rear-end feel! 🏁

Read more less

Team Associated RC10B7 Aluminum Rear Ballstud Mount – Lightweight & Durable Upgrade 🔧 The Team Associated RC10B7 Aluminum Rear Ballstud Mount is a precision-machined replacement part designed to enhance strength and consistency in your buggy’s rear suspension. Built from lightweight aluminum, this mount ensures durability and minimizes flex under load, helping maintain consistent camber gain and suspension response during high-speed cornering. 🔧 Key Features: ✅ CNC-machined aluminum for precision and durability✅ Reduces flex for consistent camber and roll-center performance✅ Lightweight design helps lower unsprung weight✅ Simple drop-in replacement for stock rear ballstud mount 📦 Includes: (1) Aluminum Rear Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Strength where it matters most.Upgrade your rear suspension with this high-precision aluminum ballstud mount for improved performance lap after lap. 🏁

Read more less

Team Associated RC10B7 Anti-Roll Sway Bar Aluminum Ball Joints (4) [92457] 🔩 Lock In Precision. Race with Confidence.Dial in your sway bar setup like a pro with the Team Associated RC10B7 Aluminum Ball Joints! These high-quality replacements offer tighter tolerances and stronger durability than stock plastic—keeping your sway bar action smooth and consistent under load. Whether you're rebuilding or upgrading, these are a must-have for your B7 or B7D buggy. 💪 Why You Need These:✅ CNC aluminum construction for added strength🎯 Perfect fit for RC10B7 and RC10B7D sway bar systems🔧 Includes set screws for secure installation🏁 Keeps sway bar action tight and responsive 📦 Includes:(4) Aluminum Ball Joints(4) Set Screws 🔩 Part Number: 92457🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Carbon Fiber Front Shock Tower – Lightweight Strength for Precision Handling ⚙️ The Team Associated RC10B7 Carbon Fiber Front Shock Tower is a lightweight and durable replacement part designed to boost performance and reduce weight. Built from high-quality carbon fiber, this front shock tower offers improved stiffness and consistency, allowing you to dial in your suspension setup with confidence. 🔧 Key Features: ✅ Lightweight carbon fiber construction✅ Increased stiffness for better shock response✅ Precision cut for consistent fit and geometry✅ Direct replacement with easy installation 📦 Includes: (1) Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Race with confidence.Upgrade your front suspension with this carbon fiber shock tower for consistent performance and competitive edge! 🏆

Read more less

Team Associated RC10B7 Carbon Fiber Rear Shock Tower – Lightweight & Race-Ready 🏁 Upgrade your rear suspension with the Team Associated RC10B7 Carbon Fiber Rear Shock Tower, designed to deliver race-proven durability and reduced weight for optimal performance. This precision-cut carbon fiber tower is a direct replacement that maintains strength while lowering your buggy’s center of gravity. 🔧 Key Features: ✅ Lightweight carbon fiber construction for improved handling✅ High strength and stiffness for consistent shock response✅ Direct fit for easy installation✅ Optimized layout for tuning shock position and geometry 📦 Includes: (1) Carbon Fiber Rear Shock Tower ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Strength meets precision.Take your rear suspension setup to the next level with this carbon fiber shock tower upgrade. 🏆

Read more less

Team Associated RC10B7 Caster Block Link Mounts (+0mm) (2) [92467] 🛠️ Dial in your RC10B7 with Factory-Grade Precision!Swap in the Team Associated RC10B7 Carbon Fiber Caster Block Link Mounts for ultra-precise handling and durability where it counts. Made from tough carbon fiber and engineered to spec, these +0mm mounts are a must-have replacement or upgrade for racers chasing podium consistency. 🔧 Key Features:✅ +0mm geometry for a stock setup and consistent steering💪 Made from lightweight, high-strength carbon fiber🚗 Direct fit for the RC10B7—no guesswork, no fuss🔄 Perfect as spares or performance replacements 📦 Includes:(2) Carbon Fiber Caster Block Link Mounts (+0mm) 🔩 Part Number: 92467🏁 Fits: Team Associated RC10B7 1/10 Buggy

Read more less

Team Associated RC10B7 Caster Block Pivot Balls (4) – Direct Replacement Hardware 🛠️ Restore smooth front-end articulation with these Team Associated RC10B7 Caster Block Pivot Balls. Designed specifically for the RC10B7 and RC10B7D buggies, these pivot balls are a direct replacement for worn or damaged parts, ensuring proper suspension geometry and consistent handling performance. 🔧 Key Features: ✅ Precision-fit replacement for RC10B7 caster block pivot points✅ Maintains smooth steering and suspension articulation✅ Durable construction built for racing conditions✅ Simple drop-in install to keep your front end race-ready 📦 Includes: (4) Caster Block Pivot Balls ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Small parts, big impact.Keep your RC10B7 handling at its best with these essential caster block pivot balls! 🏁

Read more less

Team Associated RC10B7 Caster Inserts & Shims Set – Fine-Tune Your Front-End Geometry! 🛠️ The Team Associated RC10B7 Caster Inserts and Shims Set offers precise adjustability for front-end tuning on your RC10B7 buggy. Whether you're chasing more cornering grip or improved straight-line stability, this set lets you customize your caster settings with ease. 🔧 Key Features: ✅ Replacement caster insert and shim set✅ Allows for precise front-end geometry adjustments✅ Durable molded construction for consistent fit and performance✅ Essential for fine-tuning steering response and cornering balance 📦 Includes: (6) Caster Inserts (2) Shims ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Tuning made easy.Add precision to your setup and get the most from your suspension with this caster tuning set from Team Associated. 🏁

Read more less

Team Associated RC10B7 Differential Height Inserts. These replacement differential height adjustment inserts are intended for the Team Associated RC10B7 1/10 buggy. Package includes four inserts. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Team Associated RC10B7 Factory Team Aluminum Differential Height Inserts (4) – Maximize Drivetrain Precision! ⚙️ Upgrade your RC10B7 or RC10B7D’s drivetrain with the Team Associated Factory Team Aluminum Differential Height Inserts!Designed to eliminate differential case flex and boost durability, these precision-machined inserts deliver greater consistency and reliability for serious racers pushing the limits. ✨ Key Features: ⚙️ CNC-Machined Aluminum Inserts – Provides a rigid, flex-free mounting for your differential 🔧 Enhanced Drivetrain Durability – Reduces unwanted case flex for improved power transfer and gear mesh stability 🏁 Adjustable Setup Options – Includes 0 inserts and 1–2 shims for fine-tuning 🛡️ Factory Team Race-Grade Quality – Designed for competitive racing with trusted Team Associated engineering 📦 Includes: ✔ (2) 0 Inserts ✔ (2) 1–2 Shims 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit upgrade for stock plastic inserts.🔹 Recommended for racers seeking improved drivetrain consistency and long-term durability. 🏁 Fine-tune your RC10B7’s drivetrain and race with confidence using the Factory Team Aluminum Differential Height Inserts! 🔥 Precision, durability, and performance — only from Team Associated! 🔥

Read more less

Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (+/-2.5°) – Precision Tuning for Track Conditions 🔧 Dial in your front-end geometry with the Team Associated RC10B7 Factory Team Aluminum Front Bulkhead featuring a +/-2.5° angle. This tuning option allows you to fine-tune caster settings for better handling on various track surfaces and in changing weather conditions. Made from lightweight aluminum, it adds both durability and precision to your setup. 🔧 Key Features: ✅ Factory Team performance upgrade✅ Machined aluminum for strength and precision✅ +2.5° or -2.5° caster adjustment for fine-tuning front-end geometry✅ Helps adapt steering feel to track layout and grip levels✅ Easy drop-in replacement 📦 Includes: (1) Aluminum Front Bulkhead (+/-2.5°) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Tuning made simple.Upgrade your front bulkhead and adjust caster with confidence using this Factory Team aluminum option! 🏁

Read more less

Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.

Read more less

Team Associated RC10B7 Factory Team Aluminum Pivot Ball Set – Lightweight Precision for Peak Performance! ⚙️ Enhance your buggy’s handling and responsiveness with the Team Associated Factory Team Aluminum Pivot Ball Set for the RC10B7 and RC10B7D!Made from high-strength 7075 aluminum, these pivot balls are engineered to reduce unsprung weight while maintaining maximum durability, giving you a noticeable edge on the track. ✨ Key Features: ⚙️ 7075 Aluminum Construction – Combines strength with lightweight performance for competitive racing 🛡️ Hard-Anodized Finish – Improves wear resistance and ensures long-lasting durability 🪶 3.2-Gram Weight Reduction – Lighter than stock steel pivot balls for quicker acceleration and sharper handling 🔧 Precision Machining – Ensures a smooth, consistent fit and performance 🏁 Optimized for Track Conditions – Reduces unsprung weight to boost agility and responsiveness 📦 Includes: ✔ (1) Factory Team Aluminum Pivot Ball Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock pivot balls.🔹 Highly recommended for racers looking to fine-tune weight distribution and improve overall vehicle dynamics. 🏁 Race lighter, stronger, and faster with the Factory Team Aluminum Pivot Ball Set! 🔥 Experience superior handling and durability with Team Associated Factory Team quality! 🔥  

Read more less

Team Associated RC10B7 Factory Team Carbon Fiber Front Wing Button – Lightweight Strength with Factory Style! 🛞 Upgrade your RC10B7 or RC10B7D’s aerodynamics and appearance with the Team Associated Factory Team Carbon Fiber Front Wing Button!Crafted from premium carbon fiber, this lightweight yet durable wing button provides a secure hold for your front wing, enhancing stability, reducing weight, and giving your buggy a true Factory Team look. ✨ Key Features: 🛞 High-Quality Carbon Fiber Construction – Combines lightweight performance with exceptional strength 🔧 Secure Front Wing Mounting – Keeps your wing firmly in place for consistent aerodynamics 💨 Reduces Overall Vehicle Weight – Shaves grams without compromising durability 🏁 Precision Fit for Factory Team Performance – Designed specifically for the RC10B7 and RC10B7D platforms 🎨 Sleek Factory Team Appearance – Adds a professional, race-ready finish to your setup 📦 Includes: ✔ (1) Factory Team Carbon Fiber Front Wing Button 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock plastic wing buttons.🔹 Use with standard RC10B7 wing mounting hardware. 🏁 Upgrade to Factory Team precision with the lightweight Carbon Fiber Front Wing Button! 🔥 Secure your wing, lower your weight, and race with style — Team Associated Factory Team quality you can trust! 🔥

Read more less

Team Associated RC10B7 Factory Team Carbon Front Suspension Arms (2) – Lightweight & Tuned for Performance! 🏁 Upgrade your RC10B7 with Factory Team Carbon Front Suspension Arms – precision-crafted from Team Associated’s legendary carbon composite material. These arms reduce weight, improve stiffness, and eliminate unwanted flex, making them ideal for high-traction surfaces where consistency and response are key. 🔧 Key Features: ✅ Made from AE’s carbon composite for maximum strength and minimal weight✅ Reduces flex for more consistent handling on high-bite tracks✅ Lightweight design improves agility and acceleration✅ Includes front arm spacers for easy installation and tuning✅ Factory Team performance and durability 📦 Includes: (2) Carbon Front Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 For racers chasing podium performance, carbon arms deliver unmatched precision.Dial in your front-end with Factory Team Carbon Suspension Arms! 🔧🏆

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less