Team Associated 13mm Rear Shock Spring. These replacement springs springs are intended for the Team Associated B6.4D, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring (White/2.35lbs) (72mm) [71164]⚪ Land smoother. Drive sharper.These 13mm Rear Shock Springs in White (2.35 lbs/in) are made to fine-tune your T6.2 or SC6.2 suspension. Designed for 13mm shocks, they offer plush bump absorption with enough support for high-speed landings — exactly what you need for race-ready handling.💥 Features:✅ White rate: 2.35 lbs/in✅ Length: 72mm✅ Optimized for 13mm shock upgrades✅ Soft on bumps, strong on landings✅ Includes 2 springs📦 Part Number: 71164🏁 Brand: Team Associated

Read more less

Upgrade your shocks with Team Associated's high-quality black aluminum 13mm shock caps. Designed for strength, consistency, and race-ready reliability, these caps provide enhanced durability over the stock plastic units while offering a sleek, factory look. ✅ Key Features Precision-machined aluminum construction for increased durability Anodized black for a factory team finish Lightweight design helps reduce unsprung mass Direct fit for Team Associated vehicles using 13mm shocks 🔧 Compatibility Fits the following Team Associated vehicles equipped with 13mm shocks: RC10B6.4 / RC10B6.4D RC10B6.3 / RC10B6.3D RC10B74.2 / RC10B74.2D RC10T6.4 RC10SC6.4(And any other models that use the 13mm V2 shock platform) 📦 Includes • • (2) Aluminum 13mm Shock Caps(Note: Shock bladders and O-rings sold separately)

Read more less

Upgrade your suspension setup with the Factory Team 13mm Shock Collar and Seal Retainer Set from Team Associated. This black anodized aluminum set is designed to increase durability and offer a clean, high-performance look. 📦 Includes: (2) Black aluminum shock collars (2) Black aluminum seal retainers ⚙️ Key Features: CNC-machined 6061-T6 aluminum construction Black anodized for a sleek, factory appearance Increased strength over stock plastic parts Designed for precision fit and long-term durability Factory Team tuning part ✅ Compatibility:Fits Team Associated 13mm shocks, commonly used on: RC10B6.4 / B6.4D RC10B74.2 / B74.2D RC10T6.4 RC10SC6.4 And other vehicles equipped with Team Associated 13mm shocks 🏁 Ideal For:Racers looking to improve the consistency, look, and longevity of their suspension setup. Great for both carpet and dirt track performance.

Read more less

Team Associated 13mm Shock Spring Cup Set [91966] 🌀 Fine-Tune Your Ride Height in Seconds! Dial in your suspension setup with this 13mm Shock Spring Cup Set from Team Associated. Whether you're going low or keeping it high, this kit includes 0mm, 5mm, and 9mm cups—giving you full control over ride height and spring preload. 🛠️ ✅ Fits 13mm shocks✅ Includes 0mm, 5mm, and 9mm cups✅ Perfect for on-the-fly tuning✅ Durable and precision-molded Includes:(4) 0mm Spring Cups(4) 5mm Spring Cups(4) 9mm Spring Cups 📦 Part Number: 91966🚗 Brand: Team Associated

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

🧰 Premium Pit Mat for Serious RacersElevate your workspace with the Team Associated 2023 Series Pit Mat — the perfect blend of performance, protection, and style for your pit setup. Designed for RC enthusiasts who take pride in their work area, this mat provides a clean, professional surface to wrench, tune, and display your vehicles. 🏁 About the 2023 Series Pit Mat Made from durable, easy-to-clean material, the Team Associated Pit Mat keeps parts and tools organized while preventing damage to the surface beneath. Its generous size offers plenty of workspace for both 1/10 and 1/8 scale vehicles, and the soft texture helps prevent small parts from rolling away. When you’re done, simply roll it up and take it to your next race or practice session. 🌟 Features Large size (60.96 x 121.92 cm / 24" x 48") — perfect for 1/10 & 1/8 scale vehicles Protects tables and pit benches from scratches, oils, and dirt Soft, non-slip surface helps keep tools and parts in place Easy to clean and roll up for transport or storage Stylish Team Associated Factory Team design — show your brand pride 📦 Includes (1) Team Associated 2023 Series Pit Mat 🏆 Make your workspace as sharp as your setup — with the Team Associated 2023 Series Pit Mat, every pit station looks factory fresh.  

Read more less

Team Associated 20mm Aluminum Clamping Servo Horn – 25T (Futaba/Savox/ProTek) – Part 1368Smooth Response. Secure Fit. Built to Perform. The Team Associated 20mm Aluminum Clamping Servo Horn (1368) is crafted from 7075 T6 aluminum for strength and precision. Designed for 25T spline servos (Futaba, Savox, ProTek, and others), this horn features a secure clamping design and a 20mm length that delivers smoother, more controlled steering input—ideal for 1/10 scale touring cars and competition setups. ✅ 7075 T6 aluminum construction – lightweight and incredibly strong✅ 20mm length – delivers smoother, more progressive steering feel✅ Clamping design – prevents spline slop and servo damage✅ Laser-etched spline size – easy, accurate identification✅ Compatible with Futaba, Savox, ProTek (25T spline)✅ Includes large M2.5 screw for secure clamp fit 📦 Includes: (1) 20mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1368 💡 Pro Tip: Always torque the clamp screw securely to lock in performance and reduce servo spline wear.

Read more less

Team Associated 23mm Carbon Fiber Front Shock Tower – RC10B74.1 Lightweight. Strong. Race-Ready. The RC10B74.1 23mm Carbon Fiber Front Shock Tower is a precision-cut replacement part designed specifically for Team Associated B74.1 and B74.1D 1/10 scale 4WD buggies. Crafted from high-quality carbon fiber, it offers strength without the weight—essential for competitive performance. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛡️ Durable and race-proven material 📏 23mm shock mounting geometry for consistent front-end handling 📦 Includes: (1) 23mm Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Upgrade your buggy’s performance with official Team Associated components.

Read more less

Team Associated 27.5mm Carbon Fiber Rear Shock Tower – RC10B74.1 Rear-End Stability Meets Lightweight Strength The RC10B74.1 27.5mm Carbon Fiber Rear Shock Tower is a factory replacement part built for racers demanding durability and precision. Designed for use with the Team Associated B74.1 and B74.1D 1/10 scale 4WD electric buggies, this rear tower offers optimal geometry and weight savings. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛠️ Precision fit and finish for factory-level performance 📏 27.5mm shock mounting height for consistent rear suspension response 📦 Includes: (1) 27.5mm Carbon Fiber Rear Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Engineered to handle the demands of high-speed racing—bolt on and dominate.  

Read more less

🔧 Precision Hardware for a Clean, Flush FitKeep your RC28R in peak condition with the Team Associated 2mm Flat Head Hardware Set — a premium collection of replacement screws engineered for strength, precision, and seamless installation. ⚙️ About the Screw Set These flat head screws are designed to sit flush with the surface, offering a clean look and improved aerodynamics while maintaining a solid, vibration-resistant hold. Perfect for racers and hobbyists who demand both performance and polish from their builds. 🌟 Features Comprehensive 30-piece replacement set Flat head design for smooth, flush mounting Precision-machined threads ensure secure fastening Durable steel construction resists wear and stripping Ideal for repairs, rebuilds, or custom RC projects Includes: (30) 2mm Flat Head Hardware Screws Compatibility: Team Associated RC28R Team Associated RC28 Suitable for other 1/28-scale RC builds requiring 2mm flat head screws 🧰 Essential for every pit box — restore, rebuild, or refine your micro racer with genuine Team Associated hardware built for precision and reliability.  

Read more less

Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

🔧 Precision Suspension Hardware for Your RC28 Team KitThe Team Associated 3.5x2mm Threaded Pivot Balls are precision-engineered hardware components designed for the RC28 Team Kit. These pivot balls feature a 3.5mm diameter with a 2mm threaded section, providing a secure fit and smooth articulation in the suspension system. Built for consistent handling and performance, they’re an essential part of keeping your setup race-ready. ✅ Precision Machined – Ensures consistent geometry and smooth motion✅ Durable Steel Construction – Provides strength and longevity under stress✅ Tight Thread Fit – Maintains secure linkage connections for dependable handling✅ Factory Replacement – Genuine Team Associated quality and compatibility Includes: (10) 3.5x2mm Threaded Pivot Balls Compatibility: Team Associated RC28 Team Associated RC28R ⚙️ Upgrade or maintain your RC28’s suspension precision with these genuine Team Associated threaded pivot balls — built for accuracy, strength, and performance.      

Read more less

Team Associated 3.5x35.5mm TiN Front Shock Shafts (2) Smooth Suspension. Long-Lasting Performance. Upgrade your front shocks with these 3.5x35.5mm Titanium Nitride (TiN) coated shock shafts from Team Associated. Built for durability and ultra-smooth operation, these shafts are a high-performance replacement for demanding RC conditions. 🔧 Features: ✅ Titanium Nitride Coating for reduced friction and longer lifespan ✅ Precision Ground Shafts ensure smooth shock operation ✅ 3.5mm Diameter, 35.5mm Length — front shock fitment ✅ Ideal for High-Stress Racing Conditions 📦 Includes: (2) 3.5x35.5mm TiN Front Shock Shafts 🏁 Maintain control and improve your handling with TiN strength and Factory Team precision.

Read more less

Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 3.5x44.5mm TiN Rear Shock Shafts (2) Durability Meets Smooth Performance. These 3.5x44.5mm Titanium Nitride-coated rear shock shafts are precision replacements designed for the Team Associated RC8T4 and RC8T4e vehicles. Built to withstand the rigors of 1/8-scale racing, they deliver smooth shock movement and enhanced durability. 🔧 Features: ✅ Titanium Nitride (TiN) Coated for reduced friction and extended wear life ✅ High-Precision Fitment ensures optimal shock performance ✅ 3.5mm Diameter, 44.5mm Length — rear shock compatibility ✅ Built for RC8T4 & RC8T4e Team Associated vehicles 📦 Includes: (2) 3.5x44.5mm TiN Rear Shock Shafts 🏁 Reinforce your rear suspension with Factory Team reliability and proven performance!

Read more less

Team Associated 3.5x45mm Steel Turnbuckles. These are replacement rear camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x45mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

⚙️ Fine-Tune Your Suspension SetupThe Team Associated 3.8x2.0x0.25mm Ballstud Washer is a precision shim designed for racers who want ultimate control over their suspension geometry. Placed under ball studs, these ultra-thin washers allow for small but effective changes to camber-link height—helping you dial in cornering balance, traction, and steering response with pinpoint accuracy. ✅ Ultra-Thin Precision Shims – Perfect for fine-tuning camber-link angles and roll centers✅ Durable Steel Construction – Maintains shape and consistency under load✅ Micro-Adjustable Handling – Each washer equals a 0.25 mm height change for detailed setup tuning✅ Race-Proven Quality – Designed for precision and consistency across multiple chassis setups Includes: (10) 3.8x2.0x0.25 mm Ballstud Washers Compatibility: Team Associated RC28 Team Associated RC28R Suitable for other 1/28-scale and 1/10-scale platforms using 3.5 mm ball studs 🛠️ Perfect for racers looking to achieve professional-level suspension precision and performance.    

Read more less

⚙️ Precision Suspension Tuning for Maximum PerformanceThe Team Associated 3.8x2.0x0.5mm Ballstud Washer is a high-precision tuning accessory designed to help racers fine-tune their suspension geometry. By placing these washers under your ball studs, you can adjust camber link height and roll centers to optimize cornering grip, steering response, and overall chassis balance. ✅ Precision Machined Design – Ensures consistent, repeatable ride height adjustments✅ Fine-Tuning Capability – Each 0.5mm shim allows subtle changes to suspension geometry for dialed-in performance✅ Durable Construction – Maintains shape and thickness under load for long-term reliability✅ Ideal for Trackside Adjustments – Perfect for racers seeking fine control over handling balance Includes: (10) 3.8x2.0x0.5mm Ballstud Washers Compatibility: Team Associated RC28 Team Associated RC28R Also suitable for other 1/28-scale and 1/10-scale platforms using 3.5mm ball studs 🏁 Dial in your handling precision with genuine Team Associated 0.5mm ballstud washers — the key to achieving consistent, race-winning performance.      

Read more less

⚙️ Advanced Suspension Geometry TuningThe Team Associated 3.8x2.0x1.0mm Ballstud Washer is engineered for racers who need greater adjustability in their suspension setup. Positioned under the ball studs, these washers raise the camber link height, allowing more pronounced changes to roll center and handling dynamics. Ideal for adapting your setup to different track surfaces or driving styles, these washers deliver the precision and consistency you expect from Team Associated. ✅ Provides Greater Roll Center Adjustment – Perfect for adapting suspension geometry to different track conditions✅ Precision Machined for Accuracy – Ensures uniform thickness and reliable setup changes✅ Durable Steel Construction – Maintains consistent performance even under high stress✅ Professional-Grade Tuning Accessory – Enables repeatable, controlled setup refinement Includes: (10) 3.8x2.0x1.0mm Ballstud Washers Compatibility: Team Associated RC28 Team Associated RC28R Also compatible with other 1/28-scale and 1/10-scale vehicles using 3.5mm ball studs 🏆 Fine-tune your suspension like a pro — these 1.0mm washers give you the precision you need for optimal cornering, balance, and contro    

Read more less

🔧 Premium V2 Screw-Mount Front Shock ShaftsUpgrade your buggy's performance and durability with these Ti-Nitride coated 3x21mm shock shafts—built for smooth suspension action and long life! 💡 Key Features: Ti-Nitride coating reduces wear and improves shock performance Screw-mounted design keeps pistons secure NOT compatible with E-clip pistons 🔩 Includes:(2) Front Shock Shafts – 3x21mm ✅ Compatibility:Use with ASC91576 V2 shock bodies  

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

Upgrade your suspension game with these Team Associated 3x23mm V2 Ti-Nitride Front Shock Shafts. Built for precision and durability, these screw-mount shafts are a perfect fit for racers looking to keep their ride smooth and responsive. 🔧 Features:✅ Titanium Nitride coating for reduced friction and wear✅ Screw-mount design for secure, reliable installation✅ Precision machined for consistent performance 📦 Includes:(2) 3x23mm Front Shock ShaftsMounting Hardware 🚗 Compatibility:• Team Associated B64D• Team Associated B6 Series• Team Associated B74 / B74.2• Team Associated B7 / B7D• Team Associated SR10• Team Associated RB10

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

  Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts (2pcs) Durability Meets Precision. Upgrade your suspension with Team Associated’s V2 3x27.5mm Ti-Nitride Shock Shafts, engineered for ultra-smooth performance and long-lasting wear resistance. These shafts feature a screw-mount piston design—perfect for racers who demand consistency and reliability lap after lap. Compatible with specific buggy and truck shock bodies, these are a direct fit for serious performance upgrades. 🔩 Features: ✨ Ti-Nitride Coated – Hard coating increases wear resistance and reduces friction 🔧 Screw-Mount Design – Stronger and more secure piston mounting (no E-clips) 🚗 Vehicle Compatibility: Fits ASC91577 Buggy Rear Shock Bodies Fits ASC91578 Truck Front Shock Bodies ⚠️ Note: Not compatible with E-clip style pistons 📦 Includes: (2) 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts Trust Team Associated components for reliable performance and race-ready precision.

Read more less

  Dial in your drivetrain with Team Associated’s 48 Pitch Brushless Spur Gears. Designed for smooth power transfer and durability under brushless systems, these precision-molded gears give you the tuning options you need for different track conditions. Features: High-strength composite construction 48 pitch, optimized for brushless motors Available in multiple tooth counts for gearing flexibility Perfect balance of durability and efficiency Available Sizes (each sold separately): 69T (Part #9648) 72T (Part #9649) 75T (Part #9650) Compatibility: RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D And other Team Associated 1/10 buggies using 48P gears

Read more less

Dial in your drivetrain with the Team Associated 48 Pitch, 66 Tooth Precision Spur Gear. Designed for smooth, efficient power transfer, this spur gear is perfect for fine-tuning your touring car or pan car’s torque and top speed. 🔥 Key Features: Precision-molded 48 pitch, 66 tooth spur gear Provides accurate and consistent gear mesh Optional tuning part to balance acceleration vs. top speed Genuine Team Associated factory quality and durability ✅ Compatibility: Team Associated Apex Team Associated RC10 R5 / RC10 R5.1 Team Associated RC12 R5 / RC12 R5.2 Team Associated TC5 Team Associated TC6 (Original) Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (66T) ⚠️ Tip:Experiment with different tooth counts to find the perfect balance between acceleration and top speed for your track layout.  

Read more less

Fine-tune your gearing with the Team Associated 48 Pitch, 69 Tooth Spur Gear. This optional upgrade offers smooth, efficient power transfer and allows racers to dial in the perfect gear ratio for their setup. 🔥 Key Features: Precision-molded 48 pitch, 69 tooth spur gear Provides smooth, efficient drivetrain performance Optional tuning part for gearing adjustments Genuine Team Associated quality for durability and accuracy ✅ Compatibility: Team Associated Apex Team Associated TC5 Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (69T) ⚠️ Tip:Pair with the right pinion gear to optimize top speed vs. acceleration for your track conditions.  

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

  Team Associated 5.5x2.0mm Aluminum Ball Stud Washers – Blue (10) – Part 31383Stack Smart. Tune Precisely. Perform Better. The Team Associated 5.5x2.0mm Blue Aluminum Ball Stud Washers (31383) are essential for precise suspension tuning on your 1/10 scale vehicles. With a clean anodized finish and a small outside diameter, these washers are commonly used in on-road applications but work perfectly for off-road as well. ✅ Pack of 10 lightweight aluminum washers✅ 5.5mm outer diameter / 2.0mm thickness✅ Blue anodized finish – clean, race-inspired appearance✅ Perfect for adjusting ball stud height, roll center, and link angles✅ Ideal for both on-road and off-road 1/10 scale platforms 📦 Includes: (10) 5.5x2.0mm Blue Aluminum Ball Stud Washers Part #: 31383 💡 Pro Tip: Mix with other thicknesses to fine-tune geometry without over-adjusting a single point.  

Read more less

Team Associated 5x10x4mm Factory Team Flanged Bearings (4) – Part 92324Precision Rolling. Factory Fit. Built to Last. The Team Associated 5x10x4mm Factory Team Flanged Bearings (92324) are high-performance replacement bearings designed for the RC10B74.2 and B74.2D vehicles. Built with flanged edges for added stability and alignment, these bearings help reduce friction and wear in critical drivetrain and suspension areas. ✅ Fits RC10B74.2, B74.2D, and other compatible Team Associated vehicles✅ Flanged design ensures secure fitment and stability✅ Smooth, low-friction performance for optimized efficiency✅ Durable and race-ready for high-load applications✅ Ideal for hubs, gearboxes, and rotating assemblies 📦 Includes: (4) 5x10x4mm Flanged Bearings Part #: 92324 💡 Pro Tip: Replace worn bearings regularly to keep your drivetrain running smooth and free from unnecessary drag.

Read more less

Team Associated 6mm Heavy Duty Ballstud Set (8) – Part 91047Stronger Threads. Smoother Movement. Built for Racing. The Team Associated 6mm Heavy Duty Ballstud Set (91047) is a direct replacement for worn or damaged ballstuds on vehicles like the SC10 4x4, B5, and B5M. Designed for high-strength performance under stress, these ballstuds offer secure fitment and smooth suspension articulation. ✅ Set of 8 heavy-duty 6mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and other compatible platforms✅ Heavy-duty steel construction – improved durability in high-load areas✅ Precision fit for smooth ball cup movement✅ Ideal for camber links, steering systems, and shock mounts 📦 Includes: (8) 6mm Heavy Duty Ballstuds Part #: 91047 💡 Pro Tip: Pair with fresh ball cups for smooth, slop-free suspension movement and tighter handling.

Read more less

Team Associated 6x13x5mm Factory Team Flanged Bearings (4) – Part 91559Low Friction. High Precision. Factory Tough. The Team Associated 6x13x5mm Factory Team Flanged Bearings (91559) are precision replacements designed specifically for the RC8B4 and RC8B4e platforms. Built for durability and smooth operation, these flanged bearings help reduce drag while providing a snug, secure fit in key drivetrain and suspension locations. ✅ Fits RC8B4, RC8B4e, and other compatible models✅ Flanged design for added stability and easy installation✅ Factory Team quality – smooth, long-lasting performance✅ Ideal for hubs, gearboxes, and suspension components✅ Low-friction design for peak efficiency on the track 📦 Includes: (4) 6x13x5mm Flanged Bearings Part #: 91559 💡 Pro Tip: Always keep a spare set of bearings in your pit bag—clean, fresh bearings can make a noticeable difference in run time and response.

Read more less

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) Durable Upgrade for Precision Fit & Adjustable Offset Upgrade your RC10 with the precision and strength of the Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex Set. CNC-machined and anodized for performance and style, these aluminum hexes offer a secure clamping design and are a great tuning option for adjusting track width and wheel fit. 🔧 Features: 🛠️ CNC-Machined Aluminum Construction – Lightweight, strong, and anodized for durability 🔒 Clamping Design – Secure fit with cap head screws prevents slipping during hard runs 🔁 Tuning Flexibility – Adjusts rear offset when used with compatible models 📦 Includes: (2) 7.0mm Clamping Hexes (2) Cross Pins (2) Cap Head Screws ⚙️ Compatibility Notes: ✅ Direct Fit For: RC10 B5M Factory Lite ✅ Optional Use On: T5M (stock offset), B5/B5M (adds offset) ⚠️ Requires: Team Associated HD Rear CVA Axle (ASC71019) 💡 Ideal for racers looking to fine-tune rear track width or reinforce wheel mounting with a reliable aluminum upgrade.

Read more less

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washers – Blue (10) – Part 31385Wider Support. Precision Shimming. Race-Ready Tuning. The Team Associated 7.8x1.0mm Blue Aluminum Ball Stud Washers (31385) are ideal for bulkhead and arm mount shimming in both on-road and off-road 1/10 scale vehicles. With a larger outer diameter, these washers provide more surface area, perfect for critical suspension points where strength and consistency matter. ✅ Pack of 10 precision washers✅ 7.8mm outer diameter / 1.0mm thickness✅ Anodized blue aluminum – lightweight and durable✅ Ideal for bulkhead, arm mount, and ball stud adjustments✅ Common in off-road and on-road setups alike✅ Perfect fit for 1/10 scale race platforms 📦 Includes: (10) 7.8x1.0mm Blue Aluminum Ball Stud Washers Part #: 31385 💡 Pro Tip: Use these in areas where added washer surface area can prevent flex or part deformation over time.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less