This adjustable bevel drive assembly provides reliable power transfer to your drivetrain. 🔥 Key Features: Steel bevel gear, integrated shaft, and outdrive High strength for long life OEM spec replacement ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Bevel drive gear + shaft + outdrive ⚠️ Tip: Check for backlash and mesh clearance during install. Use proper grease or diff oil as needed.

Read more less

Restore adjustability and precision with this steel turnbuckle set designed for the PTG-2 / PTG-2R rally platforms. 🔥 Key Features: Hardened steel construction for durability Full turnbuckle set for front/rear use Direct replacement for PTG-2 / PTG-2R OEM parts ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Complete turnbuckle hardware set ⚠️ Tip:After installation, check for smooth rotation and correct thread pitch. Use thread lock sparingly on ends (not the center turnbuckle adjustment section).  

Read more less

Upgrade or refresh your differential drive system with this gear diff outdrive suitable for multiple LC Racing rally and touring platforms. 🔥 Key Features: Machined diff outdrive gear for long life Compatible with front or rear differential applications OEM spec replacement for PTG-2 / PTG-2R / PTG-2TC ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R LC Racing PTG-2TC (touring car variant) 📦 Includes: (1) Diff outdrive gear (single piece) ⚠️ Tip:Ensure proper mesh with pinion and ring gear. Re-grease or inspect diff before use after install.  

Read more less

Precision replacement or upgrade drive shafts for your rally or touring platform. 🔥 Key Features: Complete front + rear drive shaft set Hardened steel construction for strength and reliability Designed to exact OEM spec for smooth drivetrain operation ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Front & Rear drive shafts (matched set) Grease spline areas lightly before install and check for straightness — bent shafts degrade handling and increase wear.

Read more less

All-in-one bevel drive assembly, built to give long-lasting drivetrain performance. 🔥 Key Features: Steel bevel gear, spur gear, shaft & outdrive included Built for durability under high stress OEM-grade replacement for rally / touring setups ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Bevel drive gear with integrated spur, shaft & outdrive ⚠️ Tip:Ensure correct backlash and mesh with your pinion when installing, and use high-quality grease for the bevel gear interface.

Read more less

An essential gearing option, this 70-tooth spur gear delivers consistent power transfer in the 48-pitch gearing system. 🔥 Key Features: 48 pitch, 70T spur gear Molded/deep-cut finish with precise tooth profile Quality steel/composite blend for good endurance ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) 70T 48-pitch spur gear ⚠️ Tip:Ensure proper mesh with the pinion gear and verify that backlash is within spec for smooth power delivery.

Read more less

Sturdy steel arm mounts to replace stock or upgrade for more rigidity. 🔥 Key Features: Steel construction for higher strength and durability over composite options Set includes upper and lower arm mounts Precision-machined dimensions for perfect suspension geometry ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Full arm mount set (steel) for both sides ⚠️ Tip:Check alignment and clearance during installation — steel mounts shift suspension stiffness and may require repositioning.

Read more less

Upgrade your drivetrain precision with the LC Racing C8022 Motor Mount, engineered for perfect gear mesh and improved rigidity. 🔥 Key Features: CNC-machined aluminum construction Provides secure motor positioning and heat dissipation Precision tolerances for smooth spur/pinion engagement Direct OEM replacement for LC Racing platforms ✅ Compatibility: LC Racing PTG-2 / PTG-2R 📦 Includes: (1) Aluminum motor mount assembly ⚠️ Tip:Double-check gear mesh and apply thread lock to mounting screws for optimal performance.  

Read more less

Reinforce your rear suspension with the LC Racing C8025 Aluminum Rear Shock Tower, offering durability and precise damping response. 🔥 Key Features: CNC-machined aluminum design Multiple shock mounting positions for fine tuning Stronger and stiffer than composite stock version Enhances suspension feel and reliability ✅ Compatibility: LC Racing PTG-2 / PTG-2R 📦 Includes: (1) Aluminum rear shock tower ⚠️ Tip:Re-check camber and ride height after installation — aluminum towers can slightly alter geometry.    

Read more less

Refresh critical mounting points with the LC Racing 5.5mm Ball Cup + Body Post set. Durable molded parts restore snug, slop-free steering/suspension links and secure body mounting for consistent handling and fit. 🔥 Key Features: 5.5mm ball cups for smooth, precise linkage movement Body post provides secure, adjustable shell mounting Molded composite construction for strength and long life Direct OEM replacement—no mods needed ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: 5.5mm ball cups (assorted) Body post with mounting hardware (as supplied by LC Racing) ⚠️ Tip:Replace worn ball cups in pairs to keep left/right linkage length equal. After install, recheck toe, camber, and body height.  

Read more less

Enhance drivetrain strength with the LC Racing C8034 Metal Outdrive, engineered to handle higher torque demands and improve reliability under racing loads. 🔥 Key Features: CNC-machined metal construction for durability and wear resistance Precision tolerances for smooth operation and reduced backlash Ideal upgrade over stock composite outdrives Direct fit replacement—no modifications needed ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Metal outdrive gear piece (front or rear fit as required) ⚠️ Tip:Check gear mesh carefully and re-grease when installing. Misaligned outdrives can cause gear chatter or drivetrain binding.    

Read more less

Protect your chassis and components with the LC Racing C8040 Bumper Set, engineered to absorb impact and maintain the integrity of your vehicle’s front end. 🔥 Key Features: Durable molded composite construction Designed to flex and absorb shock during collisions Precisely dimensioned for an exact fit and protection coverage Direct OEM replacement — no trimming or modifications required ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Front bumper (1) Rear bumper or bumper hardware as per OEM spec ⚠️ Tip:After installation, ensure bumper is aligned square and test for interference with body shell or chassis parts.

Read more less

Adjust your body height and fitment with the LC Racing C8043 Body Post Extender Set. Designed for precise, secure mounting, these extenders allow additional clearance for taller bodies or custom shell setups while maintaining a factory look and strength. 🔥 Key Features: Genuine LC Racing replacement part Durable molded composite construction Allows adjustable body height for various shell styles Maintains proper post alignment and rigidity Simple installation with OEM hardware ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Complete body post extender set ⚠️ Tip:Use thread-safe body clips or O-rings to prevent body post rattle during high-speed runs or crashes.

Read more less

Keep your steering and suspension geometry precise with the LC Racing C8060 Upright Set. These factory replacement parts provide strong, reliable wheel support while maintaining the correct kingpin angle and toe alignment for smooth, accurate handling. 🔥 Key Features: Genuine LC Racing OEM replacement part Molded composite uprights for balanced strength and lightweight performance Ensures proper wheel alignment and smooth bearing fitment Direct fit design — no modifications needed Ideal for routine maintenance or crash repairs ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Left upright (1) Right upright ⚠️ Tip:Check bearings and kingpins during installation — replace any worn parts to prevent steering wobble or uneven tire wear.

Read more less

Restore precise front-end geometry with the LC Racing C8061 C-Hub Set. These factory replacement hubs ensure smooth steering movement, accurate caster angle, and proper suspension alignment under race conditions. 🔥 Key Features: Genuine LC Racing OEM replacement part Molded composite construction for strength and controlled flex Maintains factory caster angle for balanced steering response Direct fit with stock hardware — no modifications required Ideal for maintenance or tuning rebuilds ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Left C-Hub (1) Right C-Hub ⚠️ Tip:Inspect hinge pins and steering knuckles during installation — worn parts can cause excessive play or uneven tire wear.

Read more less

Refresh your vehicle’s steering precision with the LC Racing C8062 Steering Block. This OEM replacement maintains crisp, consistent steering action and supports proper caster geometry under race conditions. 🔥 Key Features: Molded composite material for strength and impact resistance Designed to maintain torque wrap and responsive steering feedback Direct OEM form, fit, and function replacement Supports precise alignment in racing setups ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Steering blocks (left & right) ⚠️ Tip:After installation, check for any binding at ball studs and arm pivots. Use matching ball studs and recheck camber/steering toe setup.

Read more less

Maintain precise handling and durability with the LC Racing C8064 Front Suspension Arms. Designed for strength and balanced flex, these arms ensure smooth suspension movement and reliable performance on or off the track. 🔥 Key Features: Genuine LC Racing OEM replacement part Molded composite material for optimal rigidity and controlled flex Maintains correct front geometry and alignment Direct bolt-on fit — no modifications needed Ideal for crash repair or scheduled maintenance ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Front suspension arms ⚠️ Tip:Inspect hinge pins and arm mounts for wear before installation. Replacing worn components together ensures consistent suspension performance and even tire wear.

Read more less

Restore your handling precision with the LC Racing C8065 Rear Suspension Arms, designed for durability and perfect fitment on PTG-2 and PTG-2R chassis. These factory replacement arms maintain proper suspension geometry and flex characteristics for consistent rear traction on every surface. 🔥 Key Features: Genuine LC Racing replacement part Molded composite construction for strength and controlled flex Maintains correct toe, camber, and alignment under load Ideal for racing or general maintenance rebuilds Direct OEM fit — no modifications required ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Rear suspension arms ⚠️ Tip:Inspect hinge pins and arm mounts when replacing — worn hardware can cause play and inconsistent handling.  

Read more less

Fine-tune your chassis balance with the LC Racing C8066 Sway Bar Set. Designed to reduce body roll and improve stability, this set provides consistent handling through corners while maintaining traction and control. 🔥 Key Features: Genuine LC Racing OEM replacement and tuning part Includes multiple sway bar options for precise suspension tuning Helps balance front-to-rear roll stiffness for smoother cornering Improves overall handling and mid-corner stability Direct fit — no modifications required ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Complete sway bar set with hardware and mounting components ⚠️ Tip:Use softer sway bars for bumpy or low-grip tracks to increase traction, and stiffer bars for high-grip surfaces to sharpen response.

Read more less

Upgrade your driveline with the LC Racing C8067 Wheel Hub Hex 8mm Set, designed for strength, precision, and consistent wheel fitment. These hubs provide a secure connection between the axle and wheel, ensuring reliable traction and true rotation under race conditions. 🔥 Key Features: Genuine LC Racing OEM replacement part Precision-machined 8mm hex for perfect wheel alignment Aluminum construction for durability and improved power transfer Lightweight design maintains low rotating mass Direct fit — installs easily with standard hardware ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (4) 8mm aluminum wheel hex hubs (4) Retaining pins ⚠️ Tip:Apply a small amount of grease to the drive pins before installation to prevent binding and make future maintenance easier.  

Read more less

Increase chassis stiffness and tuning precision with the LC Racing C8070 3mm Carbon Fiber Front Shock Tower. This lightweight, high-strength upgrade provides improved shock response, enhanced cornering consistency, and a professional race-ready look for your PTG-2TC touring car. 🔥 Key Features: 3mm genuine carbon fiber construction for lightweight strength Precision-cut mounting holes for accurate suspension geometry Reduces flex in the front end for sharper handling Direct replacement for the stock composite shock tower Designed specifically for LC Racing’s PTG-2TC touring platform ✅ Compatibility: LC Racing PTG-2TC Touring Car 📦 Includes: (1) 3mm carbon fiber front shock tower ⚠️ Tip:Use thread-lock on the upper shock mount screws and avoid overtightening to prevent crushing the carbon weave.

Read more less

Upgrade your touring car’s performance with the LC Racing C8071 3mm Carbon Fiber Rear Shock Tower. Built for precision and durability, this lightweight tower improves rear suspension response, consistency, and overall chassis balance for competitive track driving. 🔥 Key Features: 3mm genuine carbon fiber construction for optimal strength-to-weight ratio Precision CNC-cut mounting holes for accurate shock and camber link placement Improves rear end rigidity for stable cornering and predictable handling Direct OEM replacement — no modification required Perfect for racers seeking reduced flex and enhanced feedback ✅ Compatibility: LC Racing PTG-2TC Touring Car 📦 Includes: (1) 3mm carbon fiber rear shock tower ⚠️ Tip:Tighten screws evenly to avoid twisting the tower. Use small washers under mounting hardware to distribute pressure and protect the carbon finish.

Read more less

Upgrade your front-end durability and handling precision with the LC Racing L5069 Aluminum Caster Blocks V2. These CNC-machined aluminum caster blocks are stronger and more rigid than stock components, reducing flex while improving steering consistency and suspension geometry. The V2 design brings added durability for high-performance racing. ✅ CNC-Machined Aluminum – Maximum strength and precision fit✅ V2 Design Upgrade – Improved durability for racing and bashing✅ Reduced Flex – Keeps suspension geometry consistent under load✅ Direct OEM Replacement – Genuine LC Racing part for easy installation Includes: (1) Set of Aluminum Caster Blocks V2 Compatibility: LC Racing BHC-1 May also fit select EMB series models (check manual for exact fitment) Part #: L5069

Read more less

The LC Racing L5025 Chassis Braces & Body Posts Set is a genuine replacement kit that restores rigidity and body mounting strength to your BHC-1. Designed with durability and precision in mind, this set ensures your chassis stays stable under racing stress while keeping your body shell securely attached. ✅ Chassis Braces – Add strength and reduce flex for consistent handling✅ Body Posts – Provide secure mounting points for your body shell✅ Durable Composite Construction – Lightweight yet strong for racing performance✅ Direct OEM Replacement – Perfect fit for LC Racing BHC-1 Includes: Chassis Braces Body Posts Compatibility: LC Racing BHC-1 Part #: L5025  

Read more less

Upgrade your LC Racing buggy with the L5075 Long Wheelbase Side Rail Extenders. Designed for use with the L5073 LWB chassis, these extenders provide the extra length needed to fit the L5074 BHC-1 Long Wheelbase clear body and complete your long wheelbase conversion. 🔹 Left + Right Extenders – Full set for a complete installation🔹 LWB Conversion Ready – Essential for running the L5074 LWB BHC-1 body🔹 Durable Construction – Precision-molded for strength and perfect fit🔹 Direct OEM Fit – Designed specifically for LC Racing models Includes: (1) Left Side Rail Extender (1) Right Side Rail Extender Compatibility: LC Racing BHC-1 (LWB conversion – requires L5073 Aluminum LWB Chassis and supports L5074 LWB Body) Part #: L5075

Read more less

  Add strength and style to your ride with the LC Racing CNC Aluminum Wheel Hex Set. Precision-machined for a perfect fit, these 12mm hexes provide improved durability and a secure wheel connection while adding a bold red anodized finish for a custom look. Features: CNC-machined aluminum for maximum strength and longevity 12mm hex size for secure, accurate wheel fitment Red anodized finish for corrosion resistance and style Direct replacement for stock composite wheel hexes on compatible models Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT Includes: (4) Red CNC Aluminum 12mm Wheel Hexes A functional and stylish upgrade for racers who want durability and a custom edge.

Read more less

  Upgrade your drivetrain with the LC Racing CVD Drive Shaft Set, designed for smoother power delivery, improved efficiency, and increased durability. Perfect for racers and bashers who demand precision and reliability from their RC. Features: Constant Velocity Drive (CVD) design for smooth, efficient power transfer Reduces drivetrain chatter and binding for improved handling High-strength steel construction for long-lasting durability Direct replacement for stock drive shafts on compatible LC Racing models Includes: Complete CVD Drive Shaft Set An ideal upgrade for maintaining consistent performance and handling, run after run.

Read more less

Keep your drivetrain smooth and efficient with the LC Racing Direct Drive 60T Spur Gear, designed specifically for BHC-1 RTR models. Precision-molded for perfect mesh and reliable performance, this gear is built to handle the demands of high-speed racing. Features: 60-tooth direct drive spur gear for BHC-1 RTR models High-quality composite construction for durability and smooth operation Precision-cut teeth ensure consistent gear mesh and power transfer Direct replacement for stock RTR spur gear Includes: (1) 60T Direct Drive Spur Gear A must-have spare to keep your BHC-1 running at peak performance.  

Read more less

  Secure your battery with confidence using the LC Racing EMB Battery Mount Set. Designed for multiple LC Racing platforms, this set keeps your battery firmly in place, ensuring stable performance and reliability during hard runs and high-speed driving. Features: Durable composite construction for long-lasting use Precision fit for secure battery retention Lightweight design to keep your vehicle balanced Direct replacement for stock battery mount components Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT LC12B1 Includes: Complete battery mount set with all necessary parts for installation A must-have replacement to keep your battery locked down and your RC running strong.

Read more less

  Keep your RC secure and ready to run with the LC Racing EMB Screw Set. This complete hardware kit includes all the screws needed for assembly and maintenance, making it perfect for replacing worn or lost fasteners. Features: Full set of screws for LC Racing EMB series models High-quality steel for strength and durability Includes a variety of lengths and head types for complete coverage Direct replacement for original hardware — no guessing required Includes: Complete screw set for compatible EMB models An essential kit for maintenance, repairs, or building your EMB from the ground up.

Read more less

Ensure smooth, efficient power transfer with the LC Racing Front & Rear Dogbone Set, built for durability and precision across multiple EMB series models. These dogbones keep your drivetrain running strong, even under high loads and aggressive driving. Features: High-strength steel construction for long-lasting performance Precision-machined for smooth rotation and consistent power delivery Direct replacement for stock dogbones — easy to install Suitable for both front and rear drivetrain positions Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT Includes: (2) Dogbones (Front & Rear) Perfect for keeping your EMB series vehicle’s drivetrain strong, smooth, and race-ready.

Read more less

  Upgrade your suspension precision and strength with the LC Racing Front Carbon Fiber Shock Tower for the BHC-1. Crafted from lightweight yet incredibly strong carbon fiber, this tower delivers improved rigidity while reducing weight for enhanced handling and performance. Features: High-quality carbon fiber construction for strength and weight savings Increased rigidity for consistent suspension geometry Precision-drilled shock mounting holes for easy tuning Direct fit for the LC Racing BHC-1 Includes: (1) Front Carbon Fiber Shock Tower Perfect for racers looking to boost performance and durability without adding weight.

Read more less

Bring back crisp, controlled handling with the LC Racing Front Shock Set, precision-built for multiple EMB series and LC12B1 models. Pre-assembled and ready to install, these high-quality shocks deliver smooth, consistent damping for both racing and bashing. Features: Durable construction for long-lasting, reliable performance Pre-assembled for quick, hassle-free installation Tunable with your preferred shock oil and springs (not included) Ensures smooth suspension movement and improved handling Direct replacement for stock front shocks Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TG EMB-MT LC12B1 Includes: (2) Pre-Assembled Front Shocks Perfect for restoring top-tier handling and suspension response to your LC Racing vehicle.

Read more less

The LC Racing L5036 Front Springs are genuine replacement parts designed for fine-tuning your suspension. With their black finish, L35 length, 7-turn, 0.9mm diameter design, these springs deliver reliable handling and durability across a wide range of LC Racing 1/14 models. ✅ Precision Suspension Tuning – Designed for optimal balance and handling✅ Durable Spring Steel – Long-lasting and consistent performance✅ Direct OEM Replacement – Genuine LC Racing parts for perfect fit Includes: (2) Front Springs – Black, L35, 7T, 0.9D Compatibility: LC Racing BHC-1 LC Racing EMB-WRC LC Racing EMB-TG LC Racing EMB-TC LC Racing EMB-SC LC Racing EMB-RA LC Racing EMB-MT LC Racing EMB-DT LC Racing EMB-1 Part #: L5036  

Read more less

  Keep your BHC-1 handling at its best with the LC Racing Front Suspension Arms. Designed for a perfect fit and maximum durability, these arms are built to handle the demands of competitive racing and high-performance driving. Features: Precision-molded for the LC Racing BHC-1 Strong, durable material for long-lasting performance Maintains proper suspension geometry for consistent handling Direct replacement for factory-installed arms Includes: (2) Front Suspension Arms Ideal for replacing worn or damaged arms to keep your BHC-1 race-ready.

Read more less

  Protect your drivetrain from dirt, debris, and damage with the LC Racing Gear Cover Set. Designed for a perfect fit, this cover helps keep your gears running smoothly and extends the life of your drivetrain components. Features: Shields gears from dust, dirt, and debris Durable construction for long-lasting protection Precision fit for easy installation and secure coverage Helps maintain smooth, efficient drivetrain operation Includes: Complete gear cover set with mounting hardware (if required) An essential part for keeping your LC Racing vehicle’s drivetrain clean, protected, and race-ready.

Read more less