⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Dial in your suspension and steering geometry with the Hot Racing Aluminum Adjustable Camber & Steering Links Set, engineered specifically for the Losi NASCAR platform. Designed for precision, durability, and easy tuning, this upgrade gives you greater control over handling and steering response. Machined from durable aluminum, these adjustable links replace the stock components to provide increased strength and more accurate alignment control. Quick camber and toe-in adjustments allow you to fine-tune your setup for different track conditions, improving steering feel, stability, and overall performance. Built for OEM fitment, installation is straightforward and hassle-free. Features CNC-machined aluminum construction for increased strength Adjustable design for precise camber and toe-in tuning Improves steering response and handling consistency Durable upgrade over stock plastic links OEM fit for easy installation and proper geometry Includes (1) Aluminum Adjustable Camber & Steering Links Set A perfect upgrade for racers and drivers looking to improve durability, tuning flexibility, and on-track performance from their Losi® NASCAR.  

Read more less

 ⚙️ Precision Gearing. Maximum Durability. Race-Proven Performance. Fine-tune your drivetrain with the Hot Racing Mod 0.5 Hardened Steel Pinion Gear. Precision-machined from hardened steel and finished with a durable blackened coating, these premium pinions are built to withstand the demands of high-performance brushless systems while delivering smooth, efficient power transfer. Available in popular gearing options from 23T through 30T, these gears allow racers and bashers to optimize acceleration, top speed, and motor efficiency for any track or driving style. ⚡ Features: ⚙️ Precision-machined Mod 0.5 gear profile💪 Hardened steel construction for maximum durability🖤 Blackened finish improves wear resistance and appearance🔧 Precision 1/8" (3.17mm) bore for accurate fitment🏁 Available in multiple tooth count options🚀 Ideal for high-performance brushless and brushed applications🧭 Fine-tune acceleration, speed, and motor temperatures🔥 Designed for long-lasting drivetrain reliability 📏 Specifications: Gear Pitch: Mod 0.5Bore Size: 1/8" (3.17mm)Available Tooth Counts: 23T, 24T, 26T, 27T, 29T, 30TMaterial: Hardened SteelFinish: Blackened Steel 📦 Includes: (1) Mod 0.5 Hardened Steel Pinion Gear(1) 3mm Set Screw 🔧 Compatibility: Compatible with vehicles using: Mod 0.5 gearing 3.17mm (1/8") motor shafts Commonly used in many 1/10 scale and mini brushless racing and bashing applications. 💡 Pro Tip: Larger pinion gears increase top speed but also increase motor load and operating temperatures. Smaller pinions improve acceleration and help keep electronics cooler. Always check motor and ESC temperatures after changing gearing to maximize performance and reliability. 🏁⚙️🔥

Read more less

 ⚙️ Precision Gearing. Hardened Steel Strength. Built for Performance. Upgrade your drivetrain with the Hot Racing Mod 0.5 Hardened Steel Pinion Gear—designed for smooth power transfer, precise gear mesh, and long-lasting durability. Manufactured from hardened steel with a blackened finish, these pinion gears are built to handle high-RPM applications and demanding RC conditions with confidence. Available in multiple tooth count options from 16T to 29T, these gears allow racers and bashers to fine-tune acceleration, top speed, and overall drivetrain performance for their specific setup. ⚡ Features: ⚙️ Precision-machined Mod 0.5 pinion gear💪 Hardened steel construction for maximum durability🖤 Blackened finish for improved wear resistance and appearance🔧 Ideal for high-performance RC applications🏁 Available in multiple tooth count options for gearing adjustments🧭 Helps fine-tune acceleration and top speed🚀 Smooth and efficient drivetrain operation 📏 Specifications: Gear Pitch: Mod 0.5Bore Size: 2.3mm (0.090in)Available Tooth Counts: 16T–29TMaterial: Hardened Steel 📦 Includes: (1) Mod 0.5 Pinion Gear(1) 3mm Set Screw 🔧 Perfect For: 🏁 Racing applications💥 High-performance brushless setups⚡ Speed tuning and gearing changes🔧 RC vehicles using 2.3mm motor shafts and Mod 0.5 gearing 💡 Pro Tip: Smaller pinions increase acceleration and motor temps stay lower, while larger pinions increase top speed—always monitor motor and ESC temperatures after changing gearing.

Read more less

 ⚙️ Precision Gearing. Maximum Durability. Built for Performance. Fine-tune your drivetrain with the Hot Racing Mod 0.5 Hardened Steel Pinion Gear. Precision-machined from hardened steel and finished with a durable blackened coating, these pinion gears are designed to handle the demands of high-performance brushless systems while providing smooth, reliable power transfer. Available in multiple tooth counts from 12T through 31T, these gears allow racers and bashers to dial in acceleration, top speed, and motor efficiency to perfectly match track conditions and driving style. ⚡ Features: ⚙️ Precision-machined Mod 0.5 gear profile💪 Hardened steel construction for maximum durability🖤 Blackened finish improves wear resistance and appearance🔧 Precision bore for accurate fitment and reduced gear slop🏁 Available in multiple tooth count options from 12T–31T🚀 Ideal for high-performance brushless and brushed applications🧭 Helps optimize acceleration, speed, and motor temperatures🔥 Designed for long-lasting drivetrain reliability 📏 Specifications: Gear Pitch: Mod 0.5Bore Size: 3.17mm (1/8in)Available Tooth Counts: 12T–31TMaterial: Hardened SteelFinish: Blackened Steel 📦 Includes: (1) Mod 0.5 Hardened Steel Pinion Gear(1) 3mm Set Screw 🔧 Compatibility: Compatible with vehicles using: Mod 0.5 gearing 3.17mm (1/8") motor shafts Perfect for many 1/10 scale and mini brushless applications. 💡 Pro Tip: Smaller pinion gears increase acceleration and reduce motor temperatures, while larger pinions increase top speed. Whenever changing gearing, monitor motor and ESC temperatures to ensure optimal performance and reliability. 🏁⚙️🔥

Read more less

Upgrade drivetrain strength where it matters most with the Hot Racing Steel Drive Stub Axles for the Axial SCX30. Engineered for high-stress crawling conditions, these hardened steel axles deliver increased durability, precision, and reliability compared to the stock components. CNC-machined from hardened spring steel, these stub axles are built to handle torque, binding, and repeated impacts—making them ideal for technical crawling and long-term use. Features & Benefits: CNC-machined from hardened spring steel Increased strength and durability over stock axles Precision fit for smooth drivetrain operation Ideal upgrade or replacement for worn or damaged shafts Designed for demanding crawling applications Compatibility: Axial SCX30 (1/30 scale) Fits front and rear axles Includes: Steel drive stub axle set A solid drivetrain upgrade for SCX30 crawlers looking to eliminate weak points and crawl with confidence.        

Read more less

Refresh your build with the Hot Racing Steel Hardware Set for the Axial SCX30. This complete replacement kit swaps the factory hardware for durable steel fasteners, improving strength, reliability, and long-term durability—especially important for hard crawling and frequent maintenance. Features & Benefits: Full steel hardware set for added strength Direct replacement for factory screws Improves durability and resistance to stripping Ideal for rebuilds, upgrades, or maintenance refreshes Compatibility: Axial SCX30 (1/30 scale) Includes: Complete steel hardware set for Axial SCX30 A simple, practical upgrade to keep your SCX30 tight, reliable, and trail-ready.  

Read more less

Take your X-Maxx or XRT stability to the next level with the Hot Racing Steel HD CV Drive Axles. These heavy-duty axles are designed to increase track width and durability, making them a perfect upgrade for high-speed bashing and aggressive terrain. ⚙️ Wider Stance = More StabilityThese axles extend your vehicle’s width by: +15mm per side +30mm total track width increase This wider stance helps: Reduce rollovers Improve cornering stability Increase overall control at high speeds Perfect for large-scale trucks where stability is everything. 🔩 Heavy-Duty Steel ConstructionBuilt from CNC-machined hardened steel, these CV drive axles are designed to handle extreme power and punishment. The durable black corrosion-resistant finish ensures long-lasting performance even in harsh environments. 🏁 Built for Big PowerWhether you're running high-power setups, big tires, or hard bashing sessions, these upgraded axles provide the strength and reliability needed to keep your drivetrain together. ⚡ Features +15mm per side width increase (+30mm total) Improves stability and reduces rollovers CNC-machined hardened steel construction Durable black corrosion-resistant finish Heavy-duty design for high-power applications Direct upgrade for improved drivetrain strength   📦 Includes (2) Steel HD CV Drive Axles   🔧 Compatibility Traxxas X-Maxx Traxxas XRT   A must-have upgrade for drivers looking to increase stability, widen stance, and strengthen the drivetrain on their X-Maxx or XRT.  

Read more less

  💪🚀 Wider Stance, Greater Stability, Built for Extreme Power Upgrade your Traxxas XRT or X-Maxx with the Hot Racing Steel HD CV Drive Axles. Precision CNC-machined from hardened steel, these heavy-duty constant velocity (CV) axles increase your vehicle's track width by 25mm per side (50mm total) for improved stability and reduced rollover tendency. Finished in a durable black corrosion-resistant coating, they're built to withstand the punishment of high-power bashing while delivering smooth, reliable drivetrain performance. ⚙️ About the HD CV Drive Axles 📏 Increased Track Width By extending the stance 25mm on each side, these axles increase the overall track width by 50mm, providing greater stability during aggressive cornering, high-speed runs, and hard landings. 💪 Heavy-Duty Steel Construction Manufactured from CNC-machined hardened steel, these CV axles are designed to handle the extreme power and weight of the XRT and X-Maxx while offering excellent durability and wear resistance. 🛡️ Corrosion-Resistant Finish A durable black finish helps protect the axles from corrosion while giving them a clean, factory-inspired appearance. 🔧 Features ✔ CNC-machined hardened steel construction✔ Heavy-duty constant velocity (CV) design✔ Increases track width by 25mm per side✔ Adds 50mm total vehicle width for increased stability✔ Helps reduce rollovers during aggressive driving✔ Durable black corrosion-resistant finish✔ Designed for extreme bashing applications 📦 Includes (2) Hot Racing Steel HD CV Drive Axles (+25mm) 📊 Specifications Specification Details Part Number HRAXRT288C25 Product Type HD CV Drive Axles Material CNC-Machined Hardened Steel Finish Black Corrosion-Resistant Coating Track Width Increase +25mm Per Side (+50mm Total) Quantity 2 🚗 Compatibility Compatible with: Traxxas X-Maxx Traxxas XRT ⚠️ Notes Optional performance upgrade for increased chassis stability. Widens the vehicle by 50mm overall, improving cornering stability and helping reduce rollovers. Verify wheel clearance and body fitment after installation due to the increased track width.  

Read more less

🌀 Stronger. Smoother. Smarter. Upgrade your Mini Maxx’s drivetrain with the Hot Racing Steel Helical Rear Ring & Pinion Gear Set. Precision-machined from high-carbon steel, this 39T/10T gear combo delivers smoother operation, quieter performance, and higher torque-handling than stock. The helical cut design distributes load more evenly—perfect for high-power setups and serious bashers. ✅ Helical spiral-cut = quieter + smoother power delivery✅ High-carbon steel for extreme durability✅ Handles more torque with fewer teeth✅ Drop-in upgrade for the Traxxas Mini Maxx (rear) 📦 Includes:• (1) 39T Steel Helical Rear Ring Gear• (1) 10T Steel Helical Rear Pinion Gear Tame the torque. Quiet the chaos. Dominate the trail.

Read more less

⚙️ Smoother Power. Stronger Drivetrain. Built for Abuse. Upgrade your Traxxas Mini Maxx drivetrain with the Hot Racing Steel Helical Front Differential Gear Set. Designed with precision-machined helical spiral-cut gears, this heavy-duty upgrade delivers smoother operation, increased durability, and improved torque handling compared to the stock bevel gears. Constructed from high-carbon steel, these gears are built to withstand aggressive bashing, high-power setups, and hard landings while providing quieter and more efficient drivetrain performance. ⚡ Features: ⚙️ Precision-machined helical spiral-cut gear design💪 High-carbon steel construction for maximum durability🔧 Stronger and smoother than stock bevel gears🧭 Improved load distribution for increased drivetrain efficiency🔇 Reduced gear noise compared to straight-cut designs🚀 Handles increased torque and high-power setups more effectively🏁 Perfect for aggressive bashing and upgraded Mini Maxx builds 📏 Specifications: Part Number: HRASMMX9390FRing Gear Tooth Count: 39TPinion Gear Tooth Count: 10TGear Style: Helical Spiral CutMaterial: High-Carbon Steel 📦 Includes: (1) 39T Steel Helical Front Ring Gear(1) 10T Steel Helical Front Pinion Gear 🔧 Compatibility: Traxxas Mini Maxx 💡 Pro Tip: Helical gears help reduce drivetrain noise and improve smoothness under load—making them an excellent upgrade for powerful brushless Mini Maxx setups running larger tires or high-grip surfaces.    

Read more less

⚙️🔥 Upgrade Your Drivetrain with Hardened Steel StrengthThe Hot Racing 46T MOD1 Steel Spur Gear is an optional drivetrain upgrade for compatible Traxxas high-performance models. Replacing the factory plastic spur gear with CNC-machined hardened steel provides a durable option for demanding high-power setups.🏁 About the Steel Spur Gear⚙️ 46-Tooth MOD1 DesignThis spur gear features a 46-tooth MOD1 configuration for compatible Traxxas drivetrains. The tooth count is laser etched directly onto the gear for quick identification.🔧 Hardened Steel ConstructionCNC machined from hardened steel and finished with a black oxide coating, this gear is designed as a durable upgrade over the factory plastic spur gear.🏎️ Made for High-Power Traxxas PlatformsDesigned for several popular Traxxas platforms including the E-Revo VXL 2.0, Maxx, X-Maxx, XO-1, and XRT.✨ Features✔ 46-tooth spur gear✔ MOD1 gear pitch✔ CNC-machined hardened steel construction✔ Black oxide finish✔ Laser-etched tooth count marking✔ Upgrade for the factory plastic spur gear✔ 52.8mm overall diameter✔ 8mm gear face width📦 Includes (1) Hot Racing 46T MOD1 Steel Spur Gear🔧 Compatibility Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx Traxxas XO-1 Traxxas XRT📝 Installation Notes X-Maxx: Do not use the factory pin system to set gear mesh with this spur gear. Remove the pins and manually adjust the gear mesh using the four 4x16mm button-head cap screws on the bottom. A narrow strip of notebook paper can be placed between the pinion and spur gear while setting the mesh. Tighten the motor into position, then remove the paper and verify the gears rotate freely without binding. Refer to the Traxxas manual for additional gear-mesh adjustment instructions.

Read more less

The Hot Racing HRASJT254 is a hardened steel 32-pitch spur gear designed for demanding 1/10 Traxxas applications. CNC machined from hardened steel and lightened for reduced rotating mass, this 54-tooth spur gear offers exceptional durability and consistent performance under high-power setups. Ideal for drivers looking to replace worn plastic spur gears or upgrade for improved reliability, this spur gear is built to handle aggressive driving while maintaining precise gear mesh. 🔧 Features CNC-machined, lightened hardened steel construction Black oxide coating for corrosion resistance and long service life Includes silver-colored countersunk washers for secure mounting Designed for 32 pitch (0.8 module) gearing setups 📐 Specifications Number of Teeth: 54 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face Width: 6mm (0.24 in) Internal Diameter: ~11mm (~0.43 in) 📦 Includes 54T 32-Pitch Steel Spur Gear (3) Mounting Screws (3) Silver Countersunk Washers (3) Shims (use as needed to prevent screw protrusion through spur mounting plate) ⚠️ Requirements & Notes Requires hardened clutch bell or pinion gear Requires slipper transmission Will NOT work with vehicles equipped with a center gear differential For center-diff vehicles, use Hot Racing SSLF2-series spur gears instead ✅ Compatibility Traxxas E-Revo (1/10) Traxxas Jato 3.3 Traxxas T-Maxx 3.3 Traxxas T-Maxx 2.5R Traxxas Summit (1/10) Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4

Read more less

The Hot Racing HRASLF254T is a lightweight aluminum 32-pitch (0.8 module) spur gear designed for Traxxas 1/10 vehicles equipped with slipper clutch transmissions. CNC machined from durable 6061-T6 aluminum and hard anodized in a gunmetal finish, this spur gear provides smooth, consistent power delivery while reducing rotating mass compared to steel options. Ideal for racers and bashers looking to fine-tune drivetrain response without sacrificing fitment or reliability. 🔧 Features CNC-machined 6061-T6 aluminum construction Hard anodized gunmetal finish for durability Lightweight design reduces rotating mass Direct-fit replacement for slipper clutch transmissions 0.8 module pitch (compatible with 32-pitch gearing) 📐 Specifications Number of Teeth: 54 Gear Pitch: 0.8 module (32 pitch compatible) Material: 6061-T6 Aluminum 📦 Includes 54T Aluminum 0.8 Mod Spur Gear ⚠️ Requirements & Notes Designed for vehicles equipped with a slipper clutch transmission Not compatible with center gear differential ✅ Compatibility Traxxas Jato 3.3 Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4 Traxxas T-Maxx 3.3

Read more less

The HotRace V1 Carpet Rear Buggy Tires are designed to deliver maximum performance on high-grip carpet racing surfaces, including both US and European track styles. Built to fit most 1/10 scale 2.2" rear buggy wheels, these tires are compatible with both 2WD and 4WD platforms, making them a versatile choice for competitive racers. Constructed with a low-profile carcass, the V1 tires reduce sidewall flex and chassis roll, allowing quicker transitions and improved high-speed stability. The tight tread structure generates excellent forward traction while the alternating pin row layout enhances side-bite and durability. The tread pattern is designed to wear evenly, providing consistent grip throughout long race programs. Available in Soft and Soft/Medium compounds, these tires allow racers to fine-tune rear traction based on track grip levels and conditions. 🔧 Features:• Designed for all carpet racing surfaces• Compatible with 1/10 2WD and 4WD rear buggy wheels• Low-profile carcass improves response and reduces chassis roll• Tight tread pattern provides strong forward traction• Alternating pin rows improve side-bite and durability• Available in multiple compounds for tuning performance 📦 Includes:• (2) HotRace V1 Carpet 2.2" Rear Buggy Tires• (2) Foam Inserts ⚙️ Specifications:• Scale: 1/10• Wheel Size: 2.2" (55.88mm)• Position: Rear Designed for high-traction racing, the HotRace V1 Carpet rear tires deliver the forward bite, stability, and durability needed to stay competitive on modern carpet tracks. 003-0612 003-0622      

Read more less

Precision Performance. Lab-Calibrated Consistency. Keep your shocks performing at their peak with HUDY Ultimate Silicone Oil 400 cSt, the trusted choice of top racers worldwide. Manufactured in Europe by HUDY’s premium silicone specialists, this oil is laboratory tested and calibrated to deliver unmatched consistency, batch after batch. Whether you’re tuning for off-road stability or on-road precision, HUDY’s 400 cSt oil provides the perfect balance of damping and responsiveness for smooth, predictable handling. Race-Ready Quality HUDY oils use the industry-standard cSt rating for easy identification and setup changes. The 400 cSt blend sits in the light-to-medium viscosity range, making it ideal for shock applications where precise damping is key. Each oil type is color-coded for instant recognition and faster pit work. Features: Premium-grade silicone oil manufactured in Europe Lab-tested for precision and batch consistency 400 cSt viscosity — perfect for shock tuning cSt-rated for easy setup adjustments Color-coded labeling for quick identification Trusted by professional racers worldwide Specifications: Viscosity: 400 cSt Volume: 100 ml bottle Product Code: 106341 HUDY Ultimate Oils — Consistency You Can Feel.    

Read more less

🛻🏔️ Rugged Half-Truck Styling for Your SCX24 The Injora IR40-24 Half Truck Pre-Painted Hard Body Set transforms a compatible Axial SCX24 into a detailed, rugged scale rig. Finished in Gray, Red, or Tan and constructed from durable ABS, the IR40-24 combines realistic truck styling with functional features including a bed rack, flexible mirrors, front and rear LED lighting, and a convenient hinged mounting system. Designed around a 133mm (5.2") wheelbase, this complete body set is an excellent way to dramatically change the appearance of your SCX24 build. 🛻 About the IR40-24 Half Truck Body 🔥 Detailed Scale Appearance The molded ABS body features aggressive half-truck styling with a detailed front grille, windshield wipers, side mirrors, and rear bed rack. The pre-painted Gray, Red or Tan finish means there's no body painting required before installation. 💡 Front & Rear LED Lights Included front and rear LED light units add functional illumination and another level of scale realism for nighttime crawling and trail runs. 🔧 Clipless Front & Hinged Rear Mount A front clipless mounting system combines with a rear body hinge, allowing the entire body to swing upward for convenient access to the chassis, electronics, and battery. 🛡️ Durable ABS Construction Unlike a traditional thin polycarbonate crawler body, the IR40-24 uses rigid ABS construction for a substantial, realistic appearance. Flexible rubber side mirrors help reduce the chance of damage when navigating tight trails and obstacles. 🔧 Features Designed for compatible Axial SCX24 platforms 133mm (5.2") wheelbase Rugged Half Truck-style design Durable ABS hard body construction Pre-painted Gray, Red or Tan finish Detailed front grille Bed rack included Flexible side mirrors Windshield wiper details Front clipless mounting system Rear hinged body mount Body swings open for easier chassis and battery access Front LED light unit included Rear LED light unit included Scale-focused appearance Mounting hardware included 📦 Includes (1) Injora IR40-24 Half Truck Pre-Painted Gray, Red or Tan Body (1) Bed Rack Assembly (2) Windshield Wipers (2) Side Mirrors (1) Front Grille (1) Front LED Light Unit (1) Rear LED Light Unit Mounting Hardware 📊 Specifications Specification Details Brand Injora Model IR40-24 Application Axial SCX24 Body Style Half Truck Material ABS Color Gray, Red or Tan Length 7.4in (188mm) Wheelbase 5.2in (133mm) Width 2.69in (68.5mm) Height 2.53in (64.5mm) Weight 2.15oz (61g) LED Lights Front & Rear Bed Rack Included

Read more less

Upgrade your micro crawler with the Injora D19 0.7" ModuWheel Beadlock Wheels. Combining CNC-machined aluminum with brass components, these wheels add useful weight down low while providing a -2mm offset for a wider, more stable stance. The modular design features replaceable wheel faces, giving you additional customization options while maintaining a functional true beadlock design. ⚡ Features: CNC-machined brass and aluminum construction True beadlock wheel design Modular design with replaceable wheel faces -2mm negative offset increases track width Helps improve stability on climbs and uneven terrain 9.4g per wheel Approximately 37.6g total wheel weight 5mm wheel hex D19 Series design Gold finish Designed for 1/30 and 1/32 micro crawlers 📦 Includes: (4) Injora 0.7" D19 ModuWheel Beadlock Wheels (1) Torx Screwdriver 📏 Specifications: Manufacturer: InjoraPart Number: INJMW7006-19 / MW7006-19Series: D19 ModuWheelMaterial: Brass & AluminumColor: GoldOuter Diameter: 19mm (0.7")Width: 10.8mmOffset: -2mmWheel Hex: 5mmWeight: 9.4g eachTotal Wheel Weight: 37.6gQuantity: 4 🔧 Compatibility: ✅ Axial SCX30 – 1/30 Scale✅ Redcat Ascent-32 – 1/32 Scale ⚠️ Tire Fitment Note: These wheels are designed and tested specifically with Injora 0.7" tires. Fitment with tires from other manufacturers may vary because of differences in bead design and manufacturing tolerances. 💡 Pro Tip: The combination of added brass weight and a -2mm offset works in two ways: it puts additional weight low on the crawler while also widening the vehicle's stance. That's especially useful for improving stability during technical climbs and side-hilling.    

Read more less

🛞 Maximum Bite for Micro-Scale Crawling Built specifically for the SCX30 platform, these INJORA 0.7" Swamp Claw tires deliver aggressive traction in a true micro footprint. The open tread and claw-style sidewalls shine on loose dirt, wet rock, and technical climbs where grip really matters. Important Fitment Note ⚠️ Designed and tested exclusively with INJORA 0.7" wheels.Fitment with other brand wheels is not guaranteed due to design and tolerance differences. Compatibility ✔ Axial SCX30 (1/30 scale)✔ INJORA 0.7" wheels Key Features • Molded in INJORA S5 Super Soft & Sticky compound• Aggressive open tread for strong bite in mud and loose terrain• Pronounced center lugs for consistent forward traction• Claw-style sidewall lugs improve grip when side-hilling• Optimized size for true 1/30 scale performance Specifications Part Number: T7019Tire Compound: INJORA S5Outer Diameter: 36mmWidth: 14mmWeight (Each): 2.8g Package Includes (4) INJORA 0.7" Swamp Claw Tires Pro Tip 💡 Pair these with brass 0.7" wheels to keep the center of gravity low and really let the S5 compound do its thing on steep or slippery lines.    

Read more less

Upgrade your micro crawler’s performance with Injora 1.0" Silicone Rubber Tire Inserts. Designed for 56–58mm micro crawler tires, these waterproof silicone inserts provide superior sidewall support, consistent tire shape, and improved traction compared with traditional foam inserts. Choose between Soft Green for a balanced combination of support and tire flex or Super Soft Yellow for maximum tire conformity and grip on technical terrain. ⚡ Features: 🛞 Designed for 1.0" micro crawler tires📏 Fits approximately 56–58mm tires💧 Fully waterproof silicone rubber construction🌡️ Temperature resistant for consistent performance💪 Provides increased sidewall support compared with traditional foam🪨 Helps tires conform to rocks and technical terrain⚖️ Approximately 11g per insert adds useful low-mounted weight🎯 Improves traction, stability, and tire control🔧 Available in two compounds for setup tuning 🎨 Compound Options: 🟢 Soft Green – DGT-1056GNBalanced tire flex and sidewall support. Great all-around option for trail crawling, mixed terrain, and setups where additional tire stability is desired. 🟡 Super Soft Yellow – DGT-1056YLSofter compound designed for increased tire conformity and maximum grip. Excellent for technical rock crawling and setups where maximum tire flex is preferred. 📦 Includes: (4) Injora 1.0" Silicone Rubber Tire Inserts Select your desired compound before ordering. 📏 Specifications: Wheel Size: 1.0"Recommended Tire Size: 56–58mmMaterial: Silicone RubberWeight: Approximately 11g EachQuantity: 4 Inserts Available Part Numbers:DGT-1056GN – Soft GreenDGT-1056YL – Super Soft Yellow 💡 Pro Tip: Different compounds can also be used front-to-rear to fine-tune your crawler. Run Soft Green where you want additional tire support and Super Soft Yellow where you want increased tire flex and conformity.

Read more less

🔥 Lightweight Look, Heavyweight Performance! Bring strength, stability, and style to your micro crawler with the INJORA 1.0" ModuWheel Brass & Aluminum Beadlock Wheels. These precision-machined modular wheels combine aluminum faces with brass rings for improved low-center weight, a wider stance, and head-turning looks. Available in six bold face colors, they deliver both form and function for your SCX24, FCX24, or TRX-4M build. ⚡ Features: 🛠️ CNC-machined brass & aluminum construction for precision and strength 🔄 Modular replaceable wheel faces allow quick style changes 📏 Negative offset (-4.4 mm) for wider stance and better stability 🎨 Available Colors: Black, Gray, Silver, Gold, Purple, Blue 🧲 1.0" beadlock design for secure tire mounting — no glue needed ⚖️ Brass inner rings add low-mounted weight for improved climbing balance 📏 Specifications: Part Number: MW1016 Material: Brass & Aluminum Negative Offset: -4.4 mm Outer Diameter: 28 mm Width: 15.4 mm Wheel Hub Depth: 7 mm Weight: 21 g each 📦 Includes: (4) INJORA 1.0" ModuWheel Brass & Aluminum Beadlock Wheels 🔧 Compatibility: Axial SCX24 FMS FCX24 Traxxas TRX-4M Other 1/18 & 1/24 RC crawlers using 1.0" wheels 💡 Pro Tip:Pair these wheels with INJORA T1020 Cling On Tires and INJORA Silicone Inserts #1062 for elite traction and performance on any terrain — perfect balance of style and control.  

Read more less

 ⚙️ Weight. Stability. Fully Tunable Performance. Upgrade your micro crawler with the INJORA ModuWheel Beadlocks—engineered for maximum stability, low center of gravity, and customizable performance. Combining CNC aluminum construction with brass weight rings, these wheels add serious unsprung weight where it matters most for improved traction and control on technical terrain. ⚡ Features: 🛞 CNC-machined aluminum construction for precision and durability⚖️ Brass ring design adds low-end weight for improved traction and stability🧭 -4.05mm negative offset widens stance for better balance and side-hill control🔧 Modular design with replaceable wheel faces for customization💪 40.5g per wheel (162g total) for enhanced crawler performance🎨 Blue finish for a clean, custom look 📏 Specifications: Part Number: YQW-MW1316BLMaterial: Aluminum + BrassDiameter: 33.5mm (1.32in)Width: 16.5mm (0.65in)Weight: 40.5g (1.43oz) eachOffset: -4.05mmHex Size: 7mm 📦 Includes: (4) ModuWheel Brass & Aluminum Beadlock Wheels 🔧 Compatibility: Fits 1.3" tires for most 1/18 and 1/24 scale micro crawlers (SCX24, TRX-4M, AX24, Ascent 18, and similar platforms) 💡 Pro Tip: Pair with 70mm tires and soft inserts to maximize traction—these weighted wheels dramatically improve climbing performance and side-hill stability.

Read more less

🏁 Smooth Suspension Control in a True Micro Package These INJORA 26mm aluminum shocks are designed specifically for the 1/30 Axial SCX30, offering smoother action, tunability, and a big performance upgrade over the stock units. With threaded bodies and dual spring options, they’re easy to dial in for your terrain and driving style. Important Notes ⚠️ Shock oil is not included⚠️ Shocks can be run with or without oil⚠️ Due to the compact size, adding oil may require a filling tool Compatibility ✔ Axial SCX30 (1/30 scale) Key Features • CNC-machined aluminum shock bodies for strength and precision• Threaded bodies for quick preload and ride-height adjustment• Two spring rates included (soft & hard) for tuning• Nylon bottom rod ends add flexibility and reduce binding• Smooth action with consistent damping performance Specifications Part Number: SCX30-08BSShock Length (Eye-to-Eye): 26mmShock Body Material: AluminumBottom Rod End Material: NylonWeight (Each): 1gQuantity: 4 shocks Package Includes (4) 26mm Aluminum Shocks(4) Extra Springs Pro Tip 💡 Many SCX30 drivers run these dry for ultra-free movement, then add a light oil later if they want more control on steep descents.  

Read more less

🪢 Scale Rescue & Towing Strap for Micro Crawlers Be prepared for any trail recovery with the INJORA 270mm Elastic Strap Rescue Rope. Designed for 1/18 and 1/24 scale RC crawlers, this durable elastic rope with metal hooks lets you tow, rescue, or secure your truck with ease. ⚠️ Note:Slight size variation may occur due to handmade construction. Thanks for your understanding. ⚡ Features: 🧵 Elastic 2-in-1 rope design for stronger tension🔗 Includes metal hooks for easy attachment to your truck🏁 Versatile use: body fixing, towing, or scale recovery 📏 Specifications: Color Options: Black, Red, Orange, Blue, GreenLength: Approx. 270mm (10.63in)Weight: 6g (0.21oz) 📦 Package Includes: (1) RC Car Rescue Rope 🔧 Compatibility: 1/24 & 1/18 Scale RC CrawlersWorks with: TRX-4M, SCX24, FCX24, and similar platforms 💡 Pro Tip:Perfect for scale recovery setups—use multiple straps for towing heavier builds or linking trailers for your mini crawler adventures.

Read more less

🔥 Wider Stance. Lower Center. Superior Control. Upgrade your Axial SCX24 with INJORA 7mm Brass Wheel Hex Hub Extenders for improved stability, precision, and handling. These high-quality brass and aluminum adapters allow you to fine-tune your crawler’s track width — increasing width up to 3mm per side — while adding low-end weight for better climbing balance. Perfect for dialing in your stance and achieving that planted, scale look on any SCX24 platform. ⚡ Features: 🛠️ Made from premium brass and aluminum alloy for strength and accuracy 🧲 Extend track width 0–3mm per side for enhanced stability 💪 Adds low-mounted weight to improve traction and climbing control 🎨 Available in Brass, Red, or Black finishes ⚙️ 7mm wheel hex design for direct fit on all SCX24 models 🔩 Includes multiple thickness options for precise tuning 📏 Specifications: Material: Brass / Aluminum Alloy Color Options: Brass, Red, Black Thickness Options: 3mm, 4mm, 5mm, 6mm Hex Width: 7mm Compatibility: Axial SCX24 Series (AXI90081, AXI00002, AXI00001, AXI00004) 📦 Includes: (1) Set of SCX24 Wheel Hex Hub Extenders (choose thickness/color) 💡 Pro Tip:For a balanced setup, match these extenders with INJORA Brass Diff Covers and Big Bore Shocks — giving your rig both the stance and stability it deserves.

Read more less

Keep the essential tools for your micro crawler close at hand with the Injora 2-Piece Aluminum Screwdriver & Nut Driver Set. Compact and easy to handle, this set includes the small driver sizes needed for working on the Axial SCX30 and other micro-scale RC applications. The aluminum handles provide a comfortable, secure grip, while the precision steel driver tips are designed for reliable engagement with small RC hardware. ⚡ Features: Compact 2-piece micro RC tool set Lightweight aluminum handles Knurled/non-slip grip for improved control Precision steel driver tips Compact design for accessing small-scale RC hardware Great for assembly, maintenance, and trackside adjustments Ideal addition to a micro crawler tool kit Suitable for Axial SCX30 maintenance 📦 Includes: (1) 2mm Phillips Screwdriver (1) 3mm Nut Driver 📏 Specifications: Manufacturer: InjoraPart Number: Tool-LSD63-64Tool Count: 2Screwdriver: 2mm PhillipsNut Driver: 3mmHandle Material: AluminumTip Material: SteelApplication: Micro RC assembly and maintenance 🔧 Compatibility: ✅ Axial SCX30✅ Micro-scale RC crawlers✅ Other RC applications using compatible 2mm Phillips and 3mm nut hardware 💡 Pro Tip: Micro RC hardware is easy to strip or overtighten. Use firm downward pressure with the Phillips driver and snug the fasteners rather than cranking them down—especially when threading screws into plastic components.  

Read more less

🧱 Strength, Precision, and Scale Looks in One Upgrade Ditch the stock plastic and step up to INJORA aluminum axle housings for your 1/30 SCX30. These CNC-machined housings add durability, improve axle rigidity, and give your rig a clean, scale finish—without changing fitment or geometry. Important Install Note ⚠️ Use ONLY the screws included by INJORA.Stock SCX30 screws are not compatible and will not fit correctly. Compatibility ✔ Axial SCX30 (1/30 scale)✔ Direct replacement — no modifications required Key Features • CNC-machined aluminum alloy for precise fit and durability• Black anodized finish resists corrosion and wear• Stronger and more rigid than stock plastic housings• Includes matching aluminum diff covers for a complete upgrade• Maintains stock axle geometry and driveline alignment Specifications Part Number: SCX30-10BKMaterial: AluminumFront Axle Weight: 4.7gRear Axle Weight: 4.9g Package Includes (1) Front Axle Housing(1) Rear Axle Housing(2) Diff Covers Pro Tip 💡 Aluminum axle housings pair especially well with brass steering or portal upgrades, helping keep the axle true under load and improving consistency on technical climbs.  

Read more less

🧭 Lightweight Strength. Maximum Clearance. Premium Precision. Upgrade your TRX4M Defender or Bronco with the INJORA CNC Aluminum High Clearance Links Set — engineered to deliver smoother articulation, higher trail clearance, and long-lasting durability. These links are a direct-fit replacement for stock plastic components and feature a sleek black anodized finish for a professional look. ⚡ Features: 💪 CNC-machined aluminum construction for superior strength and precision 🧱 High-clearance bent links to improve approach angles and reduce hang-ups 🔩 Etched INJORA logo for a clean, factory-upgrade appearance ⚙️ Includes brass pivot balls and rubber O-rings for smooth suspension movement 🏁 Direct replacement for stock plastic links — no modification required 📏 Specifications: Part Number: 4M-37 Material: Aluminum links, brass pivot balls, rubber O-rings Color: Black anodized Quantity: 8 pieces Weight: 19g (0.67oz) 📦 Includes: (1) Set of INJORA Aluminum High Clearance Links 🔧 Compatibility: 1/18 TRX4M Defender 1/18 TRX4M Bronco 💡 Pro Tip:Pair with INJORA Brass Diff Covers or Brass Wheel Hexes to lower your center of gravity and fine-tune your weight balance — perfect for conquering rocky trails and steep climbs.

Read more less

🛠️ Protect Your Servo, Keep Steering Precise The INJORA Aluminum Servo Saver is a simple but smart upgrade for the 1/30 Axial SCX30. Designed to absorb impacts before they reach your servo gears, this spring-loaded unit helps extend servo life while maintaining smooth, responsive steering. Compatibility ✔ Axial SCX30 (1/30 scale)✔ Compatible with stock SCX30 servo✔ Compatible with INJORA N30 servo Why Upgrade • CNC-machined aluminum for a precise, durable fit• Spring-loaded design absorbs shocks and steering impacts• Helps protect internal servo gears from damage• Lightweight design with no negative effect on steering response• Direct replacement installation Specifications Part Number: SCX30-09BKMaterial: AluminumColor: BlackWeight: 0.8g Package Includes (1) Aluminum Servo Saver Pro Tip 💡 Even on micro rigs, servo damage adds up fast — a servo saver is cheap insurance, especially if you crawl hard or run indoors where sudden impacts are common.

Read more less

Upgrade your steering system with the perfect combo:the INJORA Aluminum Servo Saver (25T) paired with the INJS11 High-Voltage Coreless Servo. This setup provides a massive improvement in durability, precision, response, and overall steering authority for the Arrma Grom platform and 1/12 Losi NASCAR. The CNC-machined saver protects your servo while delivering tight, accurate steering, while the INJS11 packs high torque and fast response in a compact aluminum case. ⭐ Compatible With 1/12 Losi NASCAR 1/14 Arrma Typhon Grom 1/16 Arrma Mojave Grom 1/18 Arrma Granite Grom Arrma Gorgon Grom Arrma Quake Grom ⚠️ Important Notes ❌ Not compatible with INJS2065 servo ❌ Not compatible with Mojave Grom stock 20T servo ✔ Must be centered via your transmitter during installation ✔ This SKU includes BOTH the servo saver and the INJS11 servo Included in This Combo Set 1️⃣ INJORA Aluminum Servo Saver — GROM-11BK Features CNC machined for perfect spline fit Lightweight alloy construction Increased durability and steering precision Sleek anodized finish Weight: 3.4g Spline Size: 25T 2️⃣ INJORA INJS11 High-Torque Coreless Servo (25T) Servo Specifications Operating Voltage: 6V – 8.4V Torque: 8kg-cm @ 6V 9.5kg-cm @ 7.4V 11kg-cm @ 8.4V Speed: 0.106"/60° @ 6V 0.085"/60° @ 7.4V 0.074"/60° @ 8.4V Gear Material: Stainless steel Motor Type: Coreless Spline: 4.9mm Mini 25T Bearing: Dual ball bearing Dimensions: 32 × 12 × 27mm Weight: 21g 💥 Why Buy This Combo? Perfect servo + saver compatibility (both 25T) Huge upgrade in steering torque and accuracy More durability for off-road abuse Ideal for racers or bashers running upgraded tires/power Turn-key installation

Read more less

Give your micro crawler more bite with the Injora 0.7" XHX Pin Micro Rock Crawler Tires. Designed for the Axial SCX30 and other compatible micro crawlers, these 40mm tires use Injora's soft S5 compound and a dense, multi-directional XHX pin tread to deliver consistent traction across a variety of crawling surfaces. ⚡ Features: Soft Injora S5 rubber compound Dense XHX-shaped pin tread pattern Multi-directional tread for balanced forward and lateral traction 40mm outer diameter 14mm wide footprint Designed for 0.7" micro crawler wheels Lightweight at approximately 3.3g per tire Includes foam inserts Great for rock, concrete, dirt, and indoor crawling courses Designed and tested with Injora 0.7" wheels 📦 Includes: (4) Injora 0.7" XHX Pin Micro Crawler Tires (4) Foam Inserts 📏 Specifications: Manufacturer: InjoraPart Number: INJT7021 / T7021Tread: XHX PinCompound: S5Outer Diameter: 40mm (1.57")Inner Diameter: 18mm (0.7")Width: 14mm (0.55")Weight: Approximately 3.3g (0.12 oz) eachQuantity: 4 Tires + 4 Foam Inserts 🔧 Compatibility: ✅ Axial SCX30 1/30✅ Compatible 1/30 & 1/32 micro crawler applications using appropriate 0.7" wheels✅ Injora 0.7" Micro Crawler Beadlock Wheels ⚠️ Wheel Fitment Note: Injora designed and tested these tires specifically with Injora 0.7" wheels. Fitment on 0.7" wheels from other manufacturers may vary due to differences in bead dimensions and wheel design. 💡 Pro Tip: The XHX pin tread gives you lots of small biting edges across the contact patch, while the soft S5 compound helps the tire conform to technical surfaces. For an SCX30 build, pairing these with weighted 0.7" beadlocks can add both tire grip and low-mounted weight for improved crawling stability.  

Read more less

 ⚡ More Torque. More Speed. Drop-In SCX30 Upgrade. Give your Axial SCX30 a performance boost with the Injora 030-Size 65T Brushed Motor. Designed as a direct-fit upgrade over the stock 88T motor, the 65T design delivers stronger torque, quicker throttle response, and increased top speed while retaining the smooth control needed for technical crawling. With a pre-installed PH2.0 connector and included 11T 0.3Mod stainless steel pinion, this motor is ready for a straightforward installation without complicated modifications. ⚡ Features: 🚙 Designed specifically for the Axial SCX30💪 High-torque 65T brushed motor🚀 Faster performance than the stock SCX30 88T motor🎯 Improved throttle response and overall top speed🪨 Maintains smooth, crawler-friendly low-speed control🔧 OEM-style fitment for easy drop-in installation⚙️ Includes 11T 0.3Mod stainless steel pinion gear🔌 Pre-wired with PH2.0 connector🔋 Designed for 2S LiPo power 📦 Includes: (1) Injora 030-Size 65T Brushed Motor (1) 11T 0.3Mod Stainless Steel Pinion 📏 Specifications: Part Number: INM22Application: 1/30 Scale Rock CrawlerMotor Size: 030Motor Type: BrushedTurns: 65TInput Voltage: 2S LiPo (7.4V)Connector: PH2.0Pinion: 11T / 0.3ModWeight: 0.41oz (11.8g) 🔧 Compatibility: ✅ Axial SCX30 💡 Pro Tip: Moving from the stock 88T motor to the Injora 65T is a great option for SCX30 owners looking for a little more wheel speed and punch without giving up crawler-friendly control. With the connector and pinion already installed, it's also an easy upgrade for getting more performance without a complicated electronics conversion.

Read more less

Upgrade your micro crawler’s suspension with the Injora SCX30 22.5mm Pre-Assembled Aluminum Shock Set (SCX30-07BS). Designed for the Axial SCX30 1/30 scale 4WD mini crawler, these shocks provide smoother suspension performance and more tuning options compared to stock friction shocks. Each shock features a CNC-machined aluminum body for durability and precision, along with threaded bodies for quick preload adjustments. The nylon bottom rod ends add flexibility for improved articulation when crawling over uneven terrain. With both soft and hard springs included, you can easily dial in the suspension to match your driving style or terrain. For builders who want even smoother damping, these shocks can also be filled with shock oil for additional tuning. Features• CNC-machined aluminum shock bodies for durability and precision• Threaded bodies allow quick preload adjustments• Nylon bottom rod ends improve articulation and flexibility• Includes soft and hard spring rates for suspension tuning• Pre-assembled design for quick installation• Perfect upgrade for SCX30 mini crawler builds Specifications• Overall Length: 1.06 in (26.8mm)• Extended Length (Eye-to-Eye): 0.89 in (22.5mm)• Weight (Each): 0.03 oz (0.9g) Includes• (4) 22.5mm Pre-Assembled Aluminum Shocks• (4) Additional Springs  

Read more less

Upgrade durability without adding unnecessary weight with the Injora Aluminum Skid Plate for the Axial SCX30 (SCX30-06BK). Designed as a direct-fit upgrade for the SCX30 1/30 scale mini crawler, this skid plate installs easily with no modifications required. CNC-machined from aluminum alloy, this skid plate provides a precise, rigid fit that helps protect the drivetrain and chassis underside from trail impacts. At only 5.6 grams, it maintains the nimble handling characteristics of the SCX30 crawler while offering improved durability compared to stock components. The black anodized finish adds corrosion resistance and gives your crawler a clean, scale-inspired look that complements any build. Features• CNC-machined aluminum alloy construction for strength and precision• Direct-fit upgrade for the Axial SCX30 platform• Lightweight 5.6g design maintains crawler agility• Anodized black finish for corrosion resistance• Protects drivetrain and chassis underside• Clean, scale-style appearance Includes• (1) Injora Axial SCX30 Aluminum Skid Plate    

Read more less

Upgrade your micro crawler drivetrain with the Injora Aluminum Transmission Gearbox Set for the Axial SCX30. Featuring a CNC-machined aluminum housing and stainless steel gears, this upgrade improves drivetrain rigidity, efficiency, and long-term durability. Designed as a direct-fit upgrade, it works with both the stock SCX30 motor and the optional Injora Green Viper 1621 motor (sold separately). 🏗 Reinforced Drivetrain Performance The CNC-machined aluminum gearbox housing provides superior rigidity compared to stock plastic cases. This helps maintain proper gear alignment and drivetrain stability when crawling under heavy load. Inside, stainless steel gears deliver smooth power transfer while increasing wear resistance for long-term reliability. ⚙️ Efficient Bearing-Supported Design A bearing-supported drivetrain reduces friction and improves efficiency, resulting in smoother operation and more consistent power delivery when navigating technical terrain. ⚡ Features CNC-machined aluminum gearbox housing Increased drivetrain rigidity and durability Stainless steel gears for smooth power transfer Wear-resistant gear construction Bearing-supported drivetrain for improved efficiency Compatible with stock SCX30 motor and Injora Green Viper 1621 motor 📦 Includes (1) Axial SCX30 Aluminum Transmission Gearbox Set 🔧 Compatibility Axial SCX30 1/30 4WD Scale Mini Crawler A great upgrade for drivers looking to improve drivetrain strength, smoothness, and reliability in their SCX30 build.  

Read more less

⚙️ Precision Steering Upgrade with Added Front-End Weight These INJORA brass steering links are a direct replacement upgrade for the 1/30 Axial SCX30, adding durability and a touch of front-end weight where it actually helps. The black-coated brass finish keeps things looking clean while improving stability on climbs. Compatibility ✔ Axial SCX30 (1/30 scale) No modifications required — true drop-in fit. Key Benefits • CNC-machined brass for strength, accuracy, and corrosion resistance• Adds weight to the front axle for improved climbing stability• Helps keep the front planted for better steering control• Direct replacement for stock steering links• Black-coated finish for a subtle, premium look Specifications Part Number: SCX30-05BKMaterial: BrassFinish: Black CoatedTotal Weight: 2.8g What’s Included (2) Brass Steering Links(1) Torx Screwdriver Pro Tip 🧠 Small weight changes matter on 1/30 scale rigs — adding brass up front can noticeably improve tire bite and control on steep or technical climbs without overloading the chassis.

Read more less