📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

  Upgrade your suspension setup with the LC Racing 2.5mm Carbon Fiber Rear Shock Tower, offering increased rigidity, reduced weight, and a premium race-ready look. Made from 100% carbon fiber, this tower provides improved strength over stock while maintaining precision fitment. Features: 100% 2.5mm carbon fiber for lightweight strength and durability Flat design (stock version has a bend) for enhanced rigidity Precision-drilled shock mount holes for accurate tuning Ideal for racers seeking improved suspension response Installation Note: When a rear body mount is needed, modification is required for proper body fitment A shim between the post and mount is recommended for best results Includes: (1) Rear Carbon Fiber Shock Tower A high-performance upgrade for LC Racing 1/14-scale vehicles, built for strength, precision, and style.

Read more less

🚗 Keep your steering precise and strong! The Arrma 4x4 Steering Block Set is a direct replacement for worn or damaged steering blocks on your ARRMA 4x4 platform. Crafted from tough composite material, these blocks deliver long-lasting durability and crash resistance, even during the most extreme RC action. Precision molding ensures smooth suspension operation in all conditions. Includes: (1) Left Steering Block (1) Right Steering Block Key Features: Heavy-duty composite construction for increased crash resistance Precision molded for smooth operation and perfect fit Designed for long-term durability under high-impact bashing Direct OEM replacement—no modifications needed Compatibility: Fits a variety of ARRMA 4x4 vehicles (check your manual for exact fit) Get your steering back on point and ready for the next run with this reliable replacement set.

Read more less

Keep your RC gear dialed in with the Traxxas Tool Kit, your all-in-one solution for maintaining any Traxxas vehicle. This premium set includes 11 telescoping bits, a comfortable ratcheting handle, and a variety of nut drivers, hex drivers, screwdrivers, and a wrench—all neatly packed in a tough zippered carrying case. Perfect for pit work, home repairs, or travel! 🔧 Includes: Ratcheting handle with clear directional markings 5 Nut Drivers: 4mm, 5mm, 5.5mm, 7mm, 8mm 6 Hex Drivers: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm 3 Phillips Screwdrivers: Sizes 00, 0, 1 3 Flat-Head Screwdrivers: Sizes 2, 3, 4 Open-Ended Wrench: 4mm & 8mm Zippered Pouch: Keeps tools organized and protected ✅ Telescoping design for hard-to-reach screws✅ Built for durability and convenience✅ A must-have for every Traxxas owner Ready to wrench? This is the kit you need.

Read more less

Upgrade your SCX24 with BOOF RC 45mm Long Aluminum Double Tube Shocks – designed for smoother performance, longer articulation, and killer looks. Features:✔ Precision CNC aluminum alloy construction✔ 45mm length – ideal for lifted SCX24 builds✔ Dual-tube design for enhanced durability and stability✔ Easy bolt-on upgrade✔ Includes 4 shocks (full vehicle set) Compatible With:• All Axial SCX24 models• Other 1/24-scale crawlers with 45mm shock compatibility 💥 More flex. More control. More badass.BOOF RC – Built to Bash, Styled to Flash.  

Read more less

This is a Team Associated Rear Hub Link Mount set of two, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied link mounts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D  

Read more less

Key Features Fits the front and rear 2WD and 4x4 Traxxas Slash Latest generation V2 SC wide carcass for increased contact patch Super aggressive motocross style tread for longevity and superior traction M2 (medium) compound Soft, reusable and waterproof closed cell foam inserts Removable hexes allow easy wheel offset changes, or upgrade to 14mm, 17mm and 12mm ProTrac Offset Hexes Fits any of Pro-Line's 6x30 Removable Wheel Hexes The two most common 12mm offset hexes are included Wheels constructed of high-strength DuPont nylon Overview Pro-Line is proud to introduce a next-generation Short Course wheel design – the Raid 2.2”/3.0” Removable Hex Wheel for all Short Course Tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! Now you can with the new 6x30 Removable Hex system from Pro-Line. The wheels include a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd Rear) hexes and a pair of 12mm Slash® 2wd Front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac™ offset 12mm hexes (6355-00) are available separately to fit your exact application. Wheel hexes can be easily replaced without needing to replace your glued tires (6354-00 Replacement Slash® Hexes)! Uses Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by six M3 screws that are spaced 30mm across. Needed to Complete Nothing What's in the box? (2) Pro-Line Badlands Tires (2) Raid 2.2"/3.0" Black 6x30mm Removable Hex SC Wheels (2) Closed Cell Inserts (2) 6x30 - 12mm Hex Adapters (Slash 4x4 F and R and Slash 2wd F) 2 pcs of each size (12) M3x12mm Socket Head Cap Screw Hardware

Read more less

Traxxas 4S LiPo Completer Pack w/ EZ-Peak® 4S Charger (Part #2996X) 🔋Serious Power Meets Effortless Charging—Perfect for 4S Vehicles The Traxxas 4S Completer Pack combines a high-performance 6700mAh 14.8V 4S LiPo battery with the EZ-Peak® Live Dual 4S iD® Charger, giving you the ultimate setup for 4S brushless systems. Featuring Traxxas iD® technology, this pack eliminates the hassle of manual settings—just plug in and charge. It's the perfect match for high-power Traxxas vehicles like the Maxx®, E-Revo®, and X-Maxx®. ⚡ Features: 🔋 6700mAh 14.8V 4S LiPo Battery – Long-lasting power and high output for demanding vehicles 🔌 EZ-Peak® Live Dual iD® Charger – Charges 2 batteries at once and supports up to 4S LiPo 📱 Bluetooth Connectivity – Monitor and manage charging with the EZ-Peak Live app 🔗 iD® Auto Battery Detection – Smart charging with no guesswork 💡 LED Progress Indicators – Clear, real-time charging status 🧠 Advanced Safety Features – Overcharge protection, balanced charging, and cool-down monitoring 📦 Includes: (1) Traxxas 6700mAh 14.8V 4S LiPo Battery w/ iD® Connector (1) Traxxas EZ-Peak® Live Dual 4S Multi-Chemistry iD® Charger (1) AC Power Cord (1) Quick Start Guide 📐 Specs: Battery Type: LiPo Voltage: 14.8V (4S) Capacity: 6700mAh Connector Type: Traxxas High-Current iD® Charger Output: Up to 100W per channel Bluetooth: Yes (EZ-Peak Live App) Part Number: 2996X UPC: 020334299697 Perfect for: Maxx®, E-Revo®, X-Maxx®, Sledge®, and other 4S-compatible Traxxas vehicles.Plug in, charge up, and unleash the full potential of your 4S system.

Read more less

JConcepts Swaggers 2WD Front 2.2" Carpet Tires (Pink) – Pre-Mounted on 3376 Wheels (12mm Hex)Track-Tuned Precision for High-Grip Carpet Racing! 💥 The JConcepts Swaggers are the go-to front tires for elite-level carpet and astro racing. Featuring offset angular ribs and a low-profile design, these pre-mounted tires are engineered for high-speed consistency, sharp cornering, and superior straight-line tracking. Factory-glued to slim 3376 wheels, these are ready to race right out of the package. ✨ Key Features: ✅ Pre-Mounted on JCO3376 Wheels – Plug and play with no gluing hassle! 🔧 12mm Hex Slim-Profile Front Wheels – Choose white or yellow options (JCO3376W or JCO3376Y) 🌀 Low-Profile Carcass – Enhances stability and control on high-traction tracks 🛞 Angular Rib Design – Offers superior corner speed and straight-line accuracy 🟣 Pink Compound – Medium-soft compound with great balance of grip and longevity 🧩 No Insert Required – Lightweight and ready to dominate on carpet or turf 📦 Includes: (2) Pre-mounted JConcepts Swaggers 2.2" Front Buggy Tires – Pink Compound (2) JConcepts Slim Front Wheels (White or Yellow, 12mm Hex) 🧩 Compatibility: Fits most 2WD 1/10 scale buggies with 12mm front hex and slim wheels 🏁 Turn tighter. Track straighter. Drive faster. Dominate carpet with JConcepts Swaggers!

Read more less

Losi NASCAR Front Bumper & Splitter Set 🛠️ Bumper and Splitter Overview:The Losi NASCAR Front Bumper and Splitter is a direct replacement designed to maintain durability and performance on your Losi NASCAR platform. Engineered for optimal aerodynamics and impact resistance, this set ensures your vehicle remains race-ready. Features: ✔️ Precision-molded for a perfect fit✔️ Durable construction for high-speed impacts✔️ Maintains aerodynamic efficiency✔️ Official replacement for Losi NASCAR In The Box: 📦 (1) Front Bumper📦 (1) Splitter📦 Hardware Compatibility: ✅ Losi NASCAR  

Read more less

Keep your Mini-Z running strong with PN Racing’s High Power 750mAh Ni-MH AAA batteries. Built for racing, these cells deliver high voltage output over time, giving you the consistent performance needed for competitive runs. ✅ High Voltage Output – Maintains strong power throughout the run✅ Optimized Charging – Recommend charge rate: 0.7–1.0A for the best balance of power and runtime✅ Race Ready – Trusted by Mini-Z racers worldwide✅ Convenient Pack – Includes 4 matched AAA rechargeable batteries Specifications: Capacity: 750mAh Size: AAA Quantity: 4pcs Reliable, rechargeable, and race-proven — the PN Racing HP750 Ni-MH batteries are the perfect power solution for your Mini-Z.  

Read more less

  Dial in your drivetrain with Team Associated’s 48 Pitch Brushless Spur Gears. Designed for smooth power transfer and durability under brushless systems, these precision-molded gears give you the tuning options you need for different track conditions. Features: High-strength composite construction 48 pitch, optimized for brushless motors Available in multiple tooth counts for gearing flexibility Perfect balance of durability and efficiency Available Sizes (each sold separately): 69T (Part #9648) 72T (Part #9649) 75T (Part #9650) Compatibility: RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D And other Team Associated 1/10 buggies using 48P gears

Read more less

Maintain smooth, efficient power transfer with the Team Associated RC10B6.2 69mm CVA Bones. Built from high-quality materials, these precision-machined components are designed to withstand the rigors of competitive racing while ensuring consistent drivetrain performance. Features: 69mm length for proper fitment and geometry Precision-machined for smooth, efficient power delivery Durable construction for long-lasting performance Direct replacement for worn or damaged CVA bones Includes: (2) 69mm CVA Bones Compatibility: Team Associated RC10B6.2 Perfect for keeping your buggy’s drivetrain strong, smooth, and race-ready.

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Upgrade your hardware with these Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Designed for a secure grip, the built-in serrations bite into the wheel surface to prevent loosening during high-impact runs or long race days. ✅ Features:• Low-profile design for improved clearance• Serrated face for extra locking power• Strong steel construction for durability• Standard M4 thread size 📦 Includes:• (10) M4 Serrated Steel Wheel Nuts🔧 Part Number: 91150💡 Ideal for 1/10 scale RC vehicles requiring M4 hardware.

Read more less

Avid 7" High-Clearance Wing Set (Standard) – Uncut (2pcs) [AV10129-S] Product Overview: The Avid 7" High-Clearance / Low Drag Wing is meticulously engineered for 1/10 buggies requiring maximum airflow efficiency and structural integrity. Featuring high clearance wheel cutouts, smooth airflow shaping, and unmatched durability, this wing set is the perfect solution for racers demanding both performance and strength. This version includes two uncut wings in standard thickness, providing flexibility for trimming and custom fitment. Features: Set of two 7” uncut wings Standard thickness for maximum durability and longevity High-clearance wheel arches for improved tire clearance 18.5° low-drag rear angle relieves downforce pressure without compromising strength Small raised centerline mark for quick and precise centering during mounting Eight side support ribs for structural strength during impacts Embossed AVID logo at the center of each wing Includes gurney options to fine-tune rear traction (sold separately) Includes: (2) Avid 7" Uncut High-Clearance Wings (Standard Thickness) Part Number: AV10129-S

Read more less

JConcepts Mono 2.2" 4WD Front Buggy Wheels (4) – 12mm Hex – White or Yellow Overview:These JConcepts Mono 2.2" 4WD Front Buggy Wheels are engineered for precision fitment and performance, making them a top-tier choice for racers running the TLR 22X-4, Team Associated B74.1/B74.1D, or XRAY XB4 platforms. Designed with ROAR-legal dimensions, they feature a slight convex dish design, outer glue catch, and vent holes for smoother tire installation and consistent performance. Manufactured with advanced molding techniques and durable materials, these wheels offer a perfect balance of strength, weight, and style, while the signature JC logo ensures authenticity and quality. Features: Popular Mono-style dish design 4 wheels included per pack Available in bright white or fluorescent yellow Outer glue catch to prevent glue overflow Built-in vent holes for optimal tire mounting Durable material and advanced manufacturing process Direct fit for popular 4WD buggy platforms Compatibility: ✅ TLR 22X-4✅ Team Associated RC10 B74.1 / B74.1D✅ XRAY XB4 2021 Carpet / Dirt Editions

Read more less

Arrma Mega/BLX 4x4 Front Shock Set (2) (AR330550) Restore smooth handling and control with the Arrma Mega/BLX 4x4 Front Shock Set — the perfect replacement for worn or damaged shocks on your Big Rock, Granite, Senton, or Typhon 4x4. Built from high-quality materials and pre-filled with shock oil, these come fully assembled and ready to install. Features: Durable, high-quality construction for long-lasting performance Supplied fully assembled without springs Pre-filled with shock oil for quick installation Includes spring spacers for ride height fine-tuning Ready to bolt on — just add your preferred front springs Includes: (2) Assembled Front Shock Absorbers (springs not included) Requires: Front shock springs (ARA330459 or ARA330538, depending on model) Compatibility: Arrma Big Rock 4x4 (BLX & Mega) Arrma Granite 4x4 (BLX & Mega) Arrma Senton 4x4 (BLX & Mega) Arrma Typhon 4x4 (BLX & Mega) Built to get you back on the track or bash spot with confidence.

Read more less

Compact. Powerful. Smart.The Spektrum™ S100 Smart Charger Combo delivers up to 100W of charging power in a sleek, portable package — now bundled with a high-efficiency USB-C GaN power supply. Smart G2 technology makes charging as easy as plugging in your battery—no balance leads, no complex menus, just safe and fast charging every time. 🔹 Features: Smart G2 tech – charges & balances through one IC3® or IC5® connection 100W output with compatible USB-C power supply & cable Auto Charge mode recognizes battery type & starts automatically IC3® and IC5® ports built-in – no adapters needed Compact, lightweight design perfect for pits or travel Includes USB-C GaN Power Supply for maximum efficiency 📦 Includes: (1) S100 1x100W USB-C Smart Charger (1) USB-C GaN Power Supply (1) 60W USB-C to USB-C Cable (1) Instruction Manual ⚡ Perfect all-in-one charging solution for Spektrum Smart batteries up to 4S.

Read more less

Take your short course truck to the next level with the JConcepts HF2 SCT Body. Designed specifically for mid-motor SCT trucks, this body delivers lower center of gravity, improved aerodynamics, and killer looks. With a slammed roof and aggressive profile, it’s built for speed, stability, and cornering precision. 💨 Performance-Driven Design:• Low-profile stance with a slammed roof for reduced CG• Enlarged air escape vents for efficient airflow• Aggressive fender flares improve tire clearance during suspension travel• Updated rear number and name plates for a race-inspired look• Compatible with both standard and lightweight materials 📦 Includes:• (1) Clear HF2 SCT Body• Mounting hardware• JConcepts Hi-Flow decal sheet• Window masks 🛠️ Part Number: 0282🎨 Note: Body comes clear and unpainted.🔥 Perfect for racers looking to dominate with style and handling performance!

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Losi Racing 22 5.0 Aluminum Clamping Servo Horn (Black) (25T)PART: TLR331033 Upgrade your steering precision with the Team Losi Racing 25T Aluminum Clamping Servo Horn, designed specifically for the 22 5.0 Electric Buggy Kits. This optional servo horn is CNC-machined from lightweight aluminum for strength and reliability under high stress. Finished in black anodizing with chamfered edges, it adds a touch of style while delivering top-tier performance. The clamping design ensures a secure, tight fit to your servo. Features: Precision-machined from lightweight aluminum Durable black anodized finish with chamfered accents Clamping style for secure fitment Compatible with 25T spline servos Designed for 22 5.0 Electric Buggy Kits

Read more less

Traxxas Aluminum Steering Bellcrank Set w/ Bearings – Part 3743Sharper Steering. Smoother Feel. Built to Last. Upgrade your steering with the Traxxas Aluminum Bellcrank Set, designed for the Rustler, Bandit, Nitro Slash, and Slash platforms. Precision-machined from aluminum and pre-assembled with high-quality ball bearings, this set delivers enhanced steering precision, long-lasting durability, and sleek custom looks. ✅ CNC-machined aluminum – eliminates flex for ultra-responsive steering✅ Ball bearings included – smooth operation, reduced wear✅ Pre-assembled for quick installation✅ Available in 4 anodized colors: Blue, Green, Pink, and Red✅ Laser-etched Traxxas logo – adds a premium finish✅ Includes step-by-step installation instructions 📦 Fits: Traxxas Rustler Traxxas Bandit Traxxas Nitro Slash Traxxas Slash 📦 Includes: (1) Aluminum Steering Bellcrank Set (Pre-Assembled w/ Bearings) Part #: 3743 Color Options: Blue, Green, Pink, Red 💡 Pro Tip: Match with colored camber links, shock caps, or wheel nuts for a full custom look.

Read more less

  The Pro-Line Badlands MX43 Pro-Loc All Terrain Tire is the ultimate tire solution for X-MAXX owners. Pro-Line Badlands take the Motocross inspired tread and elevate the look a Bigger and Bolder knobby tread that matches modern MX tires. These tires have been developed from the ground up for extreme X-MAXX punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. Pro-Line X-MAXX Impulse Pro-Loc Black Wheels feature a ground breaking Bead-Loc design that allows users to change tires or foams when necessary without worrying about the tires coming out of the bead. Pro-Line’s proprietary Pro-Loc Technology brings this feature to life and creates an ultra-secure bond between Pro-Line’s Pro-Loc Tires and Pro-Line’s Impulse Pro-Loc Wheels. The reinforced Tire bead of Pro-Line’s Pro-Loc Tires fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. Features: Tires Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Reinforced Tire Bead Proprietary Pro-Loc Technology for Secure Tire Mounting Pairs perfectly with Pro-Line’s Impulse Pro-Loc wheels for X-MAXX® Foam Inserts Included Made in the USA, since 1982 Wheels Ground Breaking Pro-Loc Mounting Technology Change Tires or Foams and Re-use the Wheels Tough, Blacked-out Impulse Wheel styling Extra Thick, Extremely Durable to Take Serious X-MAXX® Abuse Stone Gray Bead-Loc Rings Stand Out from the Crowd Pairs perfectly with Pro-Line’s Badlands MX43 Pro-Loc Tires Made in the USA, since 1982

Read more less

JConcepts Advanced Formulated Tire Glue (Medium Viscosity) 🛠️ Overview:Secure your tires like the pros with JConcepts Advanced Formulated Tire Glue. Engineered for maximum tack and durability, this medium-viscosity glue provides a strong, long-lasting bond for high-performance racing. Designed with convenience in mind, it includes a precision glue tip applicator for easy application and a desiccant pack to maintain freshness. Pro driver Brian Kinwald says: “I glue a lot of tires and this is the best I’ve used.” Features: ✔️ Medium viscosity for strong, controlled application✔️ Precision glue tip applicator for accurate and mess-free gluing✔️ Sealed package with desiccant pack to maintain freshness✔️ Proven race-winning formula for ultimate tire security In The Box: 📦 (1) Bottle of JConcepts Advanced Formulated Tire Glue (Medium)📦 (1) Glue Tip Applicator📦 (1) JConcepts Strip Decal📦 (1) Desiccant Pack JConcepts Tire Gluing Tips: 🔹 Wash hands and clean the tire bead area with an all-purpose cleaner🔹 Avoid touching the bead area to maintain bond strength🔹 Apply glue evenly along the mating surfaces for a secure hold🔹 Use JConcepts tire mounting rubber bands (JCI2005) for best results🔹 Dry in a warm, ventilated area—direct sunlight helps speed curing

Read more less

Overview:Protect your electronics and add style to your setup with the 1UP Racing LowPro Bullet Plug Grips w/5mm Bullets. These grips slide directly onto 1UP 4mm and 5mm LowPro Bullet Plugs to clearly identify positive (+) and negative (–) wires, helping prevent costly mistakes while offering a professional finish. CNC machined from high-quality aluminum, they feature bold red and black anodizing, laser-etched polarity markings, and a silver outer ring for excellent grip and premium looks. The included 1UP 5mm LowPro Bullet Plugs have a low-profile 2mm tall head with 6-point contact for reduced resistance and a total length of 15mm—perfect for today’s LCG LiPo packs. Features: Instantly identifies positive (+) and negative (–) wires Prevents pulling on wires when unplugging your battery Hides messy solder joints for a cleaner look Precision CNC aluminum grips with black/red anodizing & laser etching Silver outer ring for excellent grip Includes: 1 Pair of LowPro Bullet Plug Grips (Black/Red) 1 Pair of 5mm LowPro Bullet Plugs Compatible with 1UP 4mm & 5mm LowPro Bullet Plugs (sold separately) Recommended: Secure with a drop of CA glue after installation Compatibility: Works with all 1UP Racing 4mm & 5mm LowPro Bullet Plugs Ideal for use with modern LCG LiPo batteries

Read more less

  Upgrade your drivetrain with the LC Racing L6260 Heavy Duty Oil Filled Differential Set, built for durability and smooth power delivery. Featuring the new L6258 differential gear with reinforced case and gasket, this set is engineered to handle higher loads and provide consistent performance run after run. 🔹 Heavy Duty Diff Case – Increased strength for demanding conditions🔹 New L6258 Diff Gear – Improved design for smoother operation and longer life🔹 Upgraded Gasket – Enhanced seal for reliable oil retention🔹 Original L6135 Outdrives – Proven durability and fitment Includes: (1) Heavy Duty Differential Case (1) L6258 Differential Gear (1) Gasket for L6258 Gear (2) L6135 Outdrives Compatibility: LC Racing BHC-1 LC Racing EMB series (WRC, TG, TC, SC, RA, MT, DT, 1) Part #: L6260

Read more less

📏 Fine-Tune Your Gear Ratio for Maximum 17.5 Power!The TLR 48 Pitch Direct Drive Spur Gears are precision-engineered for the TLR Direct Drive System (TLR332043), giving you ultimate control over your gearing setup. Whether you need more top-end speed or quicker acceleration, choose from 69T, 72T, or 75T options to match your track conditions and dial in your 17.5 stock setup like a pro. 🔧 Features: Designed specifically for the TLR Direct Drive System (TLR332043) Available in multiple tooth counts for perfect gearing: 69T, 72T, or 75T Precision-molded for smooth, quiet operation Ideal for 17.5 stock class racing 🏁 Optimize. Adapt. Win.These spurs help extract every ounce of performance when you're chasing podiums. Don't just race—race smart with the right spur gear. ✅ Note:The 69T and 75T spurs are included with TLR332043 but are also sold individually here for replacements or spares.

Read more less

Upgrade your Mini‑T 2.0 with this durable spindle and hub combo—perfect for tougher bash sessions or upgrading worn stock components! The package includes two front/rear spindles and hubs, designed to seamlessly bolt onto the Mini‑T 2.0 platform. Known for lightweight strength and precise steering performance, this is a simple swap for big gains in handling and durability. 🔧 Features:✅ Direct replacement for Mini‑T 2.0 stock spindle/hub✅ High-strength composite construction resists rough bashing✅ Precisely molded for smooth steering geometry✅ Includes hub assembly, spindle, bearings, pins & hardware 📦 Includes:• (2) Front/Rear Spindle & Hub Assemblies with bearings & hardware 🚗 Compatibility:• Losi Mini‑T 2.0• Losi Mini‑B

Read more less

The Team Associated RC10B74 Front Suspension Arm Set is a genuine OEM replacement designed to restore the handling and durability of your buggy. Precision-molded from high-quality composite, these arms are built to withstand the demands of competitive racing. ✅ Durable Composite Construction – Strong and lightweight for racing performance✅ Direct OEM Replacement – Genuine Team Associated parts for perfect fit✅ Precision Fitment – Maintains proper suspension geometry and handling Includes: (1) Front Suspension Arm Set (left & right) Compatibility: Team Associated RC10B74 series buggies (RC10B74, B74.1, B74.1D, B74.2, B74.2D) Check your manual for exact fitment Part #: 92128

Read more less

Traxxas 48P Spur Gear (76T)Part #: 4676 This 76-tooth, 48-pitch spur gear is a direct replacement from Traxxas, ideal for dialing in your gearing for optimal performance. Whether you're fine-tuning for acceleration or speed, this gear provides smooth, reliable power transfer. Features: Genuine Traxxas replacement part 48-pitch, 76-tooth gear Perfect for customizing gear ratios Durable molded construction Includes: (1) 76T 48P Spur Gear Note: Ensure pitch compatibility with your pinion gear before installation.  

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

Team Associated RC10B7 Factory Team Carbon Front Suspension Arms (2) – Lightweight & Tuned for Performance! 🏁 Upgrade your RC10B7 with Factory Team Carbon Front Suspension Arms – precision-crafted from Team Associated’s legendary carbon composite material. These arms reduce weight, improve stiffness, and eliminate unwanted flex, making them ideal for high-traction surfaces where consistency and response are key. 🔧 Key Features: ✅ Made from AE’s carbon composite for maximum strength and minimal weight✅ Reduces flex for more consistent handling on high-bite tracks✅ Lightweight design improves agility and acceleration✅ Includes front arm spacers for easy installation and tuning✅ Factory Team performance and durability 📦 Includes: (2) Carbon Front Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 For racers chasing podium performance, carbon arms deliver unmatched precision.Dial in your front-end with Factory Team Carbon Suspension Arms! 🔧🏆

Read more less

JConcepts Pit Mat (122x61cm) 🛠️ Overview:Upgrade your pit area with the JConcepts Pit Mat, designed for a clean, professional, and organized workspace. Made from textured, soft, and durable material, this pit mat provides a protective and slip-resistant surface for wrenching on your RC vehicles. Its roll-up design makes it easy to transport, making it perfect for racers on the go. Features: ✔️ JConcepts branded in opposing directions for a bold look✔️ Textured, padded material for durability and comfort✔️ Black color for stain resistance and a sleek appearance✔️ Roll-able design for easy storage and transportation Specifications: 📏 Dimensions: 122x61cm (48x24in)

Read more less

Compatible with Futaba 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX, 7PXR, 10PX, 16SZ, and 18SZ transmitters. Overview:The ProTek RC 6.6V 2100mAh LiFe Transmitter Battery Pack is the ultimate power upgrade for Futaba transmitters—offering unmatched safety, longevity, and reliability with modern lithium-iron-phosphate (LiFePO4) technology. About the LiFe Transmitter Battery Safe, Long-Lasting PowerLiFePO4 chemistry delivers the stability and peace of mind every racer wants. Unlike LiPo batteries, LiFe cells will not catch fire or explode, even when over-charged or deeply discharged. Capable of more than 1,000 charge cycles and up to four times the lifespan of LiPo packs, this transmitter battery offers incredible durability with consistent performance every time you power on. Better Than NiMH — Without LiPo RisksWith a nominal voltage of 6.6V, this 2-cell pack provides higher performance than standard NiMH batteries while remaining cooler, safer, and lighter. LiFe cells hold their charge far longer in storage and can be stored fully charged without degradation—ideal for transmitters that sit between race weekends. Features: Safe LiFe chemistry — no risk of fire or explosion Long cycle life — 1,000+ usable charge cycles Stable voltage under load for consistent transmitter performance Virtually no self-discharge — always ready to use Fast charge times and efficient energy delivery Lightweight and compact — reduces transmitter fatigue Compatible with a wide range of Futaba radios Important Use & Safety Notes: Use only a LiFe-specific charger (NiMH, NiCd, or LiPo chargers are not compatible). During the first 20 cycles, avoid discharging below 33% capacity. After break-in, do not discharge below 2.5V per cell. Charge at 1C max for best lifespan. Always unplug or remove the battery when not in use. Specifications: Specification Details Voltage 6.6V (2S LiFePO4) Capacity 2100mAh Chemistry LiFePO4 Charge Rate 1C Discharge Plug JR/Futaba Balance Plug XH Dimensions 76 × 41 × 17mm Weight 105g Compatibility Futaba 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX, 7PXR, 10PX, 16SZ, 18SZ Includes: (1) ProTek RC 6.6V 2100mAh LiFe Futaba Transmitter Battery Pack  

Read more less

  Add strength and style to your ride with the LC Racing CNC Aluminum Wheel Hex Set. Precision-machined for a perfect fit, these 12mm hexes provide improved durability and a secure wheel connection while adding a bold red anodized finish for a custom look. Features: CNC-machined aluminum for maximum strength and longevity 12mm hex size for secure, accurate wheel fitment Red anodized finish for corrosion resistance and style Direct replacement for stock composite wheel hexes on compatible models Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT Includes: (4) Red CNC Aluminum 12mm Wheel Hexes A functional and stylish upgrade for racers who want durability and a custom edge.

Read more less