Upgrade or refresh your drivetrain with the RC10B74 Center Differential Set from Team Associated. This high-performance center diff helps balance power delivery between the front and rear, improving cornering, acceleration, and control—especially in high-traction or uneven conditions. 🔧 Key Features: Genuine Factory Team differential assembly Smooth and consistent power transfer Essential for tuning your RC10B74 for various track conditions Helps reduce drivetrain stress under heavy loads 📦 Includes: (1) Complete Center Differential Set(May include gears, outdrives, diff case, internal hardware — verify in manual) ✅ Compatibility: Team Associated RC10B74 Also fits other RC10B74 variants (check your manual for exact fitment) Keep your buggy driving like new with this premium center diff set, built to deliver the precision and durability Team Associated is known for.

Read more less

Upgrade or replace your servo mounting solution with the Team Associated RC10B74.1 Servo Mount. Precision-machined and built to secure your steering servo in place, this factory replacement part ensures solid, reliable performance lap after lap. 📌 Key Features: Direct replacement for the stock servo mount Compatible with RC10B74.1 chassis layout Ensures secure, vibration-free servo positioning Factory Team durability and fitment ✅ Compatibility: RC10B74.1 May also be compatible with other RC10B74-series vehicles depending on configuration This part is essential for maintaining proper steering geometry and performance under race conditions. Keep your servo locked in and dialed.

Read more less

Give your RC10B74.1 the perfect balance of flex and rigidity with the Factory Team Flex Chassis Brace Support Set. Crafted from 2.0mm carbon fiber, this brace set is optimized to allow controlled flex in the chassis for enhanced traction and handling on a variety of track conditions. 📌 Key Features: Factory Team carbon fiber construction 2.0mm thickness provides the ideal flex characteristics Designed to tune chassis response for high-traction or bumpy tracks Lightweight and durable for competitive performance 📦 Includes: (1) Front Flex Chassis Brace Support (1) Rear Flex Chassis Brace Support ✅ Compatibility: RC10B74.1 May also be used on other B74 models with compatible geometry For racers looking to fine-tune handling without sacrificing durability, this Factory Team upgrade is a must-have.

Read more less

Upgrade your RC10B74.1 with the Factory Team Carbon Fiber Chassis Brace Support Set. Precision-cut from 2.0mm carbon fiber, this lightweight and rigid brace support enhances chassis stiffness and tuning capabilities—ideal for racers looking to fine-tune flex characteristics for maximum track performance. 📌 Key Features: Precision CNC-machined carbon fiber construction 2.0mm thick for optimized strength-to-weight ratio Reduces chassis flex for more consistent handling Essential for high-traction racing surfaces 📦 Includes: (1) Front chassis brace support (1) Rear chassis brace support ✅ Compatibility: RC10B74.1 May be used on other B74 variants with matching geometry Built for performance-minded racers chasing precision and durability.

Read more less

Upgrade your RC10B74 series buggy with these Factory Team Carbon Fiber Chassis Braces. Designed for increased stiffness and responsiveness, these lightweight carbon braces enhance durability while delivering consistent performance on high-traction surfaces. 📌 Key Features: Lightweight 2.5mm carbon fiber construction Increases chassis stiffness and rigidity Enhances overall handling precision Direct Factory Team upgrade for stock braces 📦 Includes: (1) Front carbon chassis brace (1) Rear carbon chassis brace ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 RC10B74.2D A must-have hop-up for serious racers seeking that perfect balance of strength and responsiveness.

Read more less

Upgrade your RC10B74.2 with the Factory Team Top Plate Kit, engineered for improved front-end strength and rigidity. This precision CNC-machined kit enhances durability while maintaining a lightweight design — perfect for serious racers looking to increase performance and chassis tuning options. 📌 Key Features: Factory Team precision fit and finish Provides increased stiffness to the front chassis area Reduces flex in high-load conditions Lightweight, durable construction 📦 Includes: (1) Factory Team top plate (1) Top plate brace Required mounting hardware ✅ Compatibility: RC10B74.2 RC10B74.2D Optimize your front-end stability and keep your steering precise with this must-have tuning upgrade from Team Associated!

Read more less

Upgrade your RC10B74.1 with this Factory Team LTC (Low Torque Capacity) Differential Set, designed to reduce rotational mass and improve acceleration and handling. This set includes both the front and rear differentials, offering a complete solution for racers seeking increased efficiency and improved cornering response. 📌 Key Features: Complete front and rear differential set Lightweight LTC design for reduced rotating mass Enhanced on-power steering and corner exit traction Factory Team components ensure a precise fit and long-term durability 📦 Includes: (2) LTC gear differential assemblies (front & rear) Internal gears and seals pre-installed Ready to fill with your preferred silicone diff fluid ✅ Compatibility: RC10B74.1 RC10B74.1D May also be used with RC10B74.2 platforms as a tuning option

Read more less

Boost chassis rigidity and improve handling response with the Factory Team 2.5mm Carbon Fiber Stiff Chassis Brace Support Set for the RC10B74.2. This upgrade provides enhanced stiffness across the center section of the buggy, helping to reduce unwanted flex and improve overall consistency, especially on high-grip tracks. 📌 Key Features: Precision-machined 2.5mm carbon fiber construction Stiffens chassis flex in key areas Lightweight with high-strength performance Ideal for high-traction surfaces or aggressive driving styles 📦 Includes: (1) Carbon fiber front brace support (1) Carbon fiber rear brace support ✅ Compatibility: Team Associated RC10B74.2 and B74.2D Factory Team tuned fit and finish

Read more less

Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Shaft Outdrive Set. Designed for use with the decoupled slipper system, this precision-engineered outdrive set provides improved drivetrain durability and smooth power delivery, making it essential for high-level competition and maintenance. 📌 Key Features: Factory Team performance-grade components Designed for decoupled slipper configuration Enhances drivetrain strength and efficiency Precision-machined for accurate fit and finish 📦 Includes: (1) Pair of shaft outdrives (left & right) Hardware required for installation ✅ Compatibility: RC10B74.2 Works in conjunction with the Factory Team decoupled slipper system

Read more less

Optimize your drivetrain performance with the Factory Team Decoupled Slipper Hub and Pads for the RC10B74.2. Designed to work with the decoupled slipper system, this upgrade reduces front wheel influence during off-power cornering and braking, providing smoother handling and increased mid-corner stability on high-grip tracks. 📌 Key Features: Factory Team precision upgrade Designed for use with decoupled slipper setups Reduces braking drag and improves off-power steering Helps maintain consistent rear traction High-quality slipper pads included 📦 Includes: (1) Decoupled Slipper Hub (2) Slipper Pads ✅ Compatibility: Team Associated RC10B74.2 May also fit other RC10B74 variants using a decoupled slipper configuration

Read more less

Upgrade your RC10B74.2 with this official Team Associated Servo Mount Set, specifically designed for use with the decoupled slipper configuration. Precision-engineered for perfect fit and performance, this set ensures secure servo mounting and consistent servo alignment during extreme track action. 🔩 Key Features: Designed for RC10B74.2 vehicles Compatible with decoupled slipper setups Factory Team precision fit and finish Includes both left and right servo mounts 📦 Includes: (1) Left Servo Mount (1) Right Servo Mount ✅ Compatibility: Team Associated RC10B74.2 Vehicles using the decoupled slipper layout

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

Overview:Upgrade your drivetrain with the Traxxas X-Maxx Constant Velocity (CV) Steel Driveshaft. Built for the 8S-spec heavy-duty drivetrain, this CV driveshaft delivers maximum strength, smoother power delivery, and reduced wear under extreme torque loads. It’s the perfect solution for high-power setups and hard bashing where reliability is critical. For owners of the older 6S X-Maxx, this driveshaft can also be used as an upgrade with additional required parts. Features: Heavy-duty steel CV driveshaft for extreme durability Designed for 8S-spec X-Maxx drivetrain Provides smoother, more efficient power transfer Reduces driveline flex and wear Genuine Traxxas factory upgrade Compatibility: X-Maxx 8S – Direct replacement X-Maxx 6S – Upgrade (requires additional parts: 7751X, 7754X, 7768 or 7768R) Includes: (1) Constant Velocity Steel Driveshaft Part Number: 7750X ⚡ Pro Tip: When upgrading a 6S X-Maxx to the 8S-spec drivetrain, grab all the required parts in one go (7751X, 7754X, and 7768 or 7768R) to ensure a smooth installation and bulletproof performance.

Read more less

Overview:Keep your Losi NASCAR car running smooth with the Losi Wheel Axle & Hex Set. Designed as a direct factory replacement, this set restores proper wheel fitment and drivetrain reliability. Precision-machined components ensure durability, while the hex adapters provide a secure wheel connection for consistent handling on the track. Features: Complete replacement wheel axle and hex set Precision-machined for durability and accurate fit Ensures reliable wheel engagement and smooth power transfer Genuine Losi replacement part Compatibility: Losi 1/18 NASCAR platform (check manual for exact model fitment) Includes: (2) Wheel Axles (2) Hex Adapters Part Number: LOS1935

Read more less

  Overview:Upgrade your suspension performance with the Traxxas GTR Assembled Shocks. Known for their silky-smooth action and race-inspired design, these shocks come fully assembled and pre-filled with shock oil, making installation fast and easy. Built from high-quality materials, they deliver consistent damping and long-lasting durability. Note: springs are not included, allowing you to select the perfect spring rate for your setup. Features: (2) Pre-assembled GTR shocks with oil Springs not included (sold separately for tuning flexibility) Aluminum bodies with PTFE-coated bores for ultra-smooth action Precision machined components for consistent performance Genuine Traxxas factory upgrade/replacement Compatibility: Traxxas Revo 3.3 Traxxas E-Revo Traxxas Summit Traxxas Slayer Pro 4x4 Other Traxxas models equipped with GTR shocks (check your manual) Includes: (2) GTR Assembled Shocks (oil-filled, no springs) Part Number: 5460

Read more less

Overview:Upgrade your drivetrain with the Traxxas Spiral Cut Differential Ring & Pinion Gear Set (Front). Precision-machined from hardened steel, this gear set provides maximum durability, smoother power transfer, and reduced slop under high loads. The spiral cut design ensures quieter operation and improved efficiency compared to straight-cut gears, making it a must-have upgrade for high-performance Traxxas builds. Features: Spiral cut design for smoother and quieter operation Hardened steel construction for maximum strength and wear resistance Provides precise gear mesh and improved durability under extreme power Genuine Traxxas factory upgrade part Compatibility (Front Differential): Traxxas Revo 3.3 Traxxas E-Revo Traxxas E-Revo Brushless Traxxas Summit Traxxas E-Maxx Brushless Traxxas T-Maxx 3.3 Includes: (1) Spiral Cut Ring Gear (1) Spiral Cut Pinion Gear Part Number: 5379R

Read more less

Overview:The Traxxas Titan 550 Marine Motor is built for high-torque, water-ready performance. Featuring 24 turns of pure copper windings, this 550-size brushed motor delivers massive torque and reliable power for RC boats. Rated for up to 14 volts, it’s designed for long runs on the water without overheating. Equipped with an integrated cooling fan, the Titan marine motor pulls cool air through the motor case to keep temperatures low and performance consistent. This motor includes capacitors for noise suppression but requires soldering, as it does not come with wires or connectors pre-installed. Features: 550-size, 24-turn brushed motor Rated for operation up to 14V Integrated cooling fan keeps temps down during long runs Provides massive torque and smooth, efficient power delivery Includes capacitors (no wires or connectors – soldering required) Genuine Traxxas replacement part Compatibility: Fits select Traxxas marine models (check manual for exact fitment) Common in Villain EX, Blast, and other Traxxas boats Includes: (1) Titan 550 Marine Motor Part Number: 1585

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

The XRAY Universal Drive Shaft is crafted from HUDY Spring Steel™ to deliver unbeatable strength, precision, and durability. Engineered for extreme racing conditions, this driveshaft ensures smoother power delivery, reduced wear, and improved handling consistency. Features: Made from HUDY Spring Steel™ for maximum strength and long life Precision-manufactured for perfect balance and smooth operation Helps reduce drivetrain binding and increase efficiency Ideal as a high-performance upgrade or replacement part Compatibility: XRAY XT8 – 1/8 Nitro Truggy (front & rear, check manual for placement) XRAY GTXE / GTX8 – 1/8 GT platforms (verify with kit manual) Part Number: 355222

Read more less

Upgrade your drivetrain with the XRAY 10T Bevel Drive Gear. Precision-machined from HUDY Steel™, this gear delivers maximum strength, durability, and long life under extreme racing conditions. Perfect for maintaining smooth and efficient power transfer in your XT8. Features: 10-tooth bevel drive gear for center differential Manufactured from HUDY Spring Steel™ for unmatched strength Heat-treated for maximum durability and wear resistance Factory precision for a perfect fit and smooth operation Essential replacement to keep your drivetrain performing at its best Compatibility: XRAY XT8 – 1/8 Nitro Truggy (all model years) XRAY GTXE / GTX8 – 1/8 GT platforms (check manual for gear ratio setups) Part Number: 355108      

Read more less

Fine-tune your XB2/XB4’s front suspension geometry with the precision-machined XRAY Aluminum Front Lower Arm Mount. Crafted from premium Swiss 7075 T6 aluminum, this mount allows for +3° or -3° arm sweep adjustment, giving racers the flexibility to dial in steering response and overall handling balance. Features: CNC-machined from high-grade Swiss 7075 T6 aluminum for maximum strength and durability Provides +3° or -3° adjustment to fine-tune suspension setup Anodized finish for wear resistance and factory look Precision design ensures a perfect fit with XRAY chassis components Improves handling versatility on varying track conditions Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for exact fit) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for exact fit) May also fit XB4 platforms depending on configuration (verify with manual) Part Number: 322317

Read more less

Upgrade your suspension durability with the XRAY Hardened Shock Shaft (45mm). Made from premium steel and precision-ground for smooth movement, these shafts provide maximum strength, wear resistance, and long-lasting performance. Designed for big-bore shocks, they deliver consistent performance even in the harshest racing conditions. Features: Set of 2 hardened 45mm shock shafts Precision-ground for ultra-smooth shock operation Extreme durability for high-stress racing conditions Direct XRAY factory replacement part Compatibility: XB2 1/10 2WD Buggy (Front/Rear depending on setup) XT2 1/10 Stadium Truck Other XRAY big-bore shock-equipped platforms (check manual for placement) Part Number: 368263

Read more less

Upgrade your suspension with the XRAY Front Hardened Shock Shafts. At 42mm length, these precision-ground shafts are engineered from hardened steel for maximum strength and wear resistance. Perfect for maintaining smooth shock action under the toughest racing conditions. Features: Precision-ground hardened steel shafts for durability 42mm length – direct replacement fit Provides smooth suspension travel and consistent damping Designed for use in high-performance racing applications Includes: (2) Front 42mm Hardened Shock Shafts Compatibility: XRAY XB2 (all variants) XRAY XT2 Stadium Truck May fit other XRAY models using big bore 42mm front shocks (check your manual for confirmation)

Read more less

Dial in your suspension with the XRAY Delrin Shock Piston Set. Made from precision-molded Delrin® for smooth, consistent damping, this complete big bore set gives you every piston option you need to fine-tune handling for any track condition. Features: Includes a complete range of pistons for big bore shocks High-quality Delrin® construction for smooth shock action Provides tuning flexibility for different track surfaces & grip levels Designed for precise fit and long-lasting performance Includes: Full piston assortment for XRAY big bore shocks Compatibility: Fits XRAY vehicles equipped with big bore shock systems

Read more less

Fine-tune your suspension geometry with the XRAY Composite Shock Ball Joint Set. Featuring extended ball joints (+2mm & +4mm), this upgrade allows you to adjust shock mounting positions for improved handling balance and suspension response. Features: Includes +2mm and +4mm extensions for versatile tuning Strong composite material ensures durability and smooth operation Helps refine ride height, shock angle, and suspension geometry Quick and easy installation for racers looking for precision handling Includes: (2) +2mm Composite Shock Ball Joints (2) +4mm Composite Shock Ball Joints Compatibility: Designed for XRAY off-road and on-road platforms (check vehicle manual for fitment)

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Take your drivetrain performance to the next level with the XRAY Composite 3G Gear Box (Graphite). Designed to work with the chassis brace, this lightweight yet ultra-strong graphite-reinforced set delivers maximum durability and precision fitment. Perfect for racers who demand reliability and performance lap after lap. Features: High-strength graphite composite material Optimized 3rd generation (3G) design for improved stiffness and efficiency Works with the chassis brace system for enhanced stability Lightweight construction without sacrificing strength Precision-molded for a perfect XRAY factory fit Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 3G gearbox with chassis brace Includes: Complete Composite 3G Gear Box (Graphite) Set

Read more less

Upgrade your ride with these precision-engineered 55mm Adjustable Turnbuckles, crafted from world-renowned HUDY Spring Steel™ for unmatched strength and durability. Featuring M3 left- and right-hand threads, they allow for easy and precise suspension and steering adjustments without removing them from the car. Features: Premium HUDY Spring Steel™ for maximum lifespan and toughness 55mm length – ideal fit for multiple XB2/XT2 suspension applications M3 left & right threads for fast, fine adjustments Black coating for wear resistance and a pro finish Includes two turnbuckles Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 55mm M3 turnbuckles Includes: (2) 55mm Adjustable Turnbuckles

Read more less

Fine-tune your XB2’s handling with the XRAY 2024 Front Anti-Roll Bars. These sway bars allow you to balance steering response and cornering stability to match track conditions. Overview:Adjusting the front anti-roll bar directly affects steering response and front-end stability: Softer bar (thinner mm): Increases front grip and stability in low-traction conditions Stiffer bar (thicker mm): Reduces body roll for precise cornering but may decrease front-end grip Available Sizes: 0.8mm (Softest) – XRA322489 1.0mm – XRA322490 1.1mm – XRA322491 1.2mm – XRA322492 1.3mm (Hardest) – XRA322493 Effects of Roll Bar Changes: Softer bar: More chassis roll, more cornering grip, slower response Stiffer bar: Less chassis roll, quicker steering response, less cornering grip Compatibility: XRAY XB2 (2024 and later) Includes: (1) Anti-Roll Bar in chosen thickness    

Read more less