Add strength and low-mounted weight where it counts with the Hot Racing Brass Center Gearbox Mount for the Axial SCX30. This optional brass skid / gearbox mount increases chassis rigidity while lowering the vehicle’s center of gravity for improved crawling stability and control. Precision CNC-machined from billet brass, it places weight at the lowest point of the chassis to help keep your SCX30 planted on climbs, sidehills, and technical lines. Features & Benefits: CNC-machined from billet brass Adds low-mounted weight at the chassis center Lowers center of gravity (CG) Improves overall stability and handling Increases chassis rigidity Direct-fit upgrade for SCX30 Compatibility: Axial SCX30 (1/30 scale) Includes: (1) Brass center gearbox mount / skid A simple, effective upgrade for SCX30 crawlers looking for more stability, better balance, and a tougher center section.      

Read more less

Add low-mounted weight where it matters most with the Hot Racing Brass Rear Hubs for the Axial SCX30. CNC-machined from solid brass, these hubs increase rear axle weight to improve stability, traction, and overall crawling performance—without adding bulk up high. Each hub adds approximately 4.1g (0.144 oz) per side, helping lower the vehicle’s center of gravity for better control on technical terrain. Features & Benefits: CNC-machined from solid brass Adds 4.1g per side of low-mounted weight Lowers center of gravity (CG) Improves stability and rear traction Direct replacement for factory plastic rear hubs Clean, durable finish for long service life Compatibility: Axial SCX30 Includes: (1) Brass rear hub set A simple, effective upgrade to keep your SCX30 planted and confident on the rocks.

Read more less

Improve suspension consistency and eliminate unwanted bind with the Vision Racing (VR) Carbon Front Pivot Brace for the TLR 22X and 22X-T. This precision-cut 2mm carbon fiber brace replaces the stock aluminum unit, which can flex or bend under hard impacts and aggressive racing conditions. By maintaining proper hinge pin alignment, this brace helps keep the front suspension moving freely and consistently, resulting in better handling, improved durability, and more predictable performance on track. Features & Benefits: 2mm carbon fiber construction for strength and rigidity Helps eliminate suspension binding caused by bent stock aluminum braces Maintains proper front hinge pin alignment Lightweight, race-focused design Improves consistency and front-end feel under hard use Compatibility: TLR 22X TLR 22X-T Includes: (1) Vision Racing Carbon Front Pivot Brace A smart performance upgrade for racers looking to tighten up front suspension action and maintain precise geometry throughout a race.        

Read more less

Strengthen your chassis and reduce front-end tweak with the Vision Racing (VR) Carbon Chassis Standoff Brace Set. Designed for carbon fiber chassis platforms, this upgrade adds rigidity where it matters most while keeping weight low and looks clean. Featuring dual-mounting aluminum standoffs, this brace helps stabilize the front section of the chassis under load, improving consistency and feel—especially on high-grip tracks and during hard landings. Features & Benefits: Reduces front-end chassis tweak Adds rigidity to carbon fiber chassis Dual-mount aluminum standoffs for strength and stability Lightweight, race-focused design Clean, stylish finish that complements carbon chassis builds Compatibility: Team Associated B7 Team Associated B7D Team Associated T7 Team Associated SC7 Includes: Carbon chassis standoff brace set with aluminum standoffs A solid first impression from Vision Racing—functional, clean, and built for racers looking to tighten up their chassis performance.  

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Maintain precise front suspension geometry with the XRAY Composite Front Lower Arm Mount. This genuine replacement part is designed for the 2024 XB2 and XT2 platforms, making it ideal for repairs, rebuilds, or keeping critical spares on hand. Features & Benefits: Composite construction for strength, durability, and controlled flex Precision molded for accurate fit and consistent suspension alignment Direct replacement for kit-supplied front lower arm mount Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt Includes: (1) Composite front lower arm mount A must-have replacement to keep your XRAY suspension dialed and race-ready.    

Read more less

Secure your batteries with confidence using the Powerhobby 25×450mm Battery Straps. Designed for strength and reliability, these straps keep your packs firmly in place during hard acceleration, jumps, and rough landings. Features & Benefits: Durable hook-and-loop design for a secure hold 25mm width x 450mm length fits a wide range of battery sizes Helps prevent battery movement during high-impact driving Ideal for racing, bashing, and high-power setups Includes: Battery strap(s) (25×450mm) A simple but essential upgrade to keep your battery locked in and your electronics protected.  

Read more less

Small in size but big on performance, the SkyRC B6 Neo delivers serious charging power in an ultra-portable design. With up to 200W DC output and USB-C PD support, this smart charger is built for hobbyists who want flexibility, speed, and safety—whether at the track or on the bench. Designed to handle a wide range of battery chemistries, the B6 Neo also doubles as a compact power supply, making it a versatile tool for modern RC setups. Features & Benefits 200W DC charging power with up to 10A output USB-C PD dual input delivers up to 80W for added flexibility Ultra-compact design—approximately ¼ the size of previous models XT60 DC input and modern Type-C PD input Built-in balance port enables faster, more efficient discharging Up to 24W discharge when using balance port + main port Comprehensive safety protections for reliable, secure charging Clean, modern design with a durable plastic housing Performance Highlights High-power charging in a pocket-sized footprint Efficient battery management across multiple chemistries Ideal for racers, bashers, and bench setups needing portable power Includes (1) SkyRC B6 Neo 200W Smart Charger A compact, high-output charger designed for today’s RC demands—powerful, portable, and built with safety in mind.  

Read more less

The Losi 6x15x5mm Ball Bearing set is a high-quality replacement designed to restore smooth, efficient operation in critical rotating components. Built to Losi’s standards, these bearings help reduce friction, improve drivetrain efficiency, and extend component life under demanding conditions. With precise tolerances and durable construction, these bearings are ideal for maintenance, rebuilds, or preventative upgrades to keep your vehicle running smoothly and reliably. Features Precision ball bearings for smooth rotation Reduces friction and wear in rotating assemblies Improves efficiency and durability Direct replacement for compatible platforms Specifications Inner Diameter: 6mm Outer Diameter: 15mm Width: 5mm Includes (4) 6x15x5mm Ball Bearings Compatibility Axial AXP8 Gilamon Losi LMT 2.0 Perfect for racers and bashers looking to keep their drivetrain smooth, efficient, and reliable.    

Read more less

Body Mounts Overview:The Team Losi Racing 22X-T Body Mount Set is a direct replacement designed to properly secure the body on your 22X-T truck. Built to factory specifications, these mounts ensure correct body alignment and a secure fit for reliable performance on the track. 🔧 Key Features Direct replacement body mount set Maintains proper body positioning and fitment Durable construction for race and practice use Designed specifically for the 22X-T platform 📦 Includes (1) Body Mounts Set 🚗 Compatibility Team Losi Racing 22X-T Ideal for repairs or refreshes, this body mount set keeps your 22X-T looking clean and performing as intended.  

Read more less

Fine-tune your suspension and lower the center of gravity with the Team Losi Racing 22X Carbon Fiber Front Shock Tower (-2mm). This optional tuning part is designed for racers looking to adjust front-end response and handling on the 22X 2WD buggy platform. Features & Benefits: Optional -2mm shock tower lowers front shock mounting points Carbon fiber construction for lightweight strength and rigidity Helps fine-tune suspension geometry and handling characteristics Precision cut for accurate fit and consistent performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) -2mm Carbon Fiber Front Shock Tower A great tuning option for racers looking to dial in front-end feel and suspension performance on their 22X.    

Read more less

  Arrma 4x14mm Button Head Screw. Package includes four screws. COMPATIBILITY: Arrma Fireteam 6S BLXArrma Granite 3S BLXArrma Infraction MEGAArrma Infraction V3 3S BLXArrma Kraton 6S BLXArrma Nero 6S BLXArrma Typhon 4X4 550Arrma Typhon 6S BLXArrma Vendetta 3S BLXArrma Vorteks 3S BLX

Read more less

Use your Traxxas TRX-4M battery with Furitek electronics using this Furitek TRX-4M to JST PH2.0 battery adapter. Designed specifically for compatibility with the Furitek Lizard Pro ESC, this adapter provides a simple, plug-and-play solution without modifying your battery or ESC. Features: Allows use of Traxxas TRX-4M batteries with Furitek ESCs Converts TRX-4M battery plug to JST PH2.0 Clean, compact adapter design No permanent modifications required Compatibility: Furitek Lizard Pro ESC Traxxas TRX-4M batteries Includes: (1) Battery adapter Part Number: FTK-FUR-2263 Perfect for TRX-4M owners upgrading to Furitek electronics while continuing to use their existing batteries.

Read more less

Upgrade durability and front suspension strength with these Powerhobby aluminum front upper arms. CNC-machined from aluminum and anodized for a clean finish, these arms are a direct replacement for the stock components and help reduce flex during hard driving. Features: CNC-machined aluminum construction Increased strength over stock plastic arms Precision fit for consistent suspension geometry Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6846 Ideal for racers and bashers looking to improve durability while adding a custom look to their NASCAR or Grom platform.  

Read more less

Secure and fine-tune your body fitment with this PN Racing body mounting kit designed specifically for the PNR Concept C9 body. Available in multiple colors, this kit offers a clean mounting solution with added adjustability for dialing in body height. Available Color Variants Orange – Part #600521O White – Part #600521W Yellow – Part #600521Y Includes Front body clips Side body clips Reversible side body clips Allows lowering body height by 1mm when installed in the reversed orientation Key Features Genuine PN Racing mounting hardware Designed specifically for PNR Concept C9 body Adjustable body height for fine-tuning CG and handling Multiple color options for customization and easy identification Requirements PNR Concept C9 Body (PN# 600500) A clean, functional upgrade for racers looking to lock in body fitment while gaining a little extra tuning flexibility 🏁  

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less

The XPT3 LCG Transmission from Reefs RC is a purpose-built, ultra-compact drivetrain upgrade engineered for competitive 1/10 crawlers. Weighing in at just 75 grams, the XPT3 delivers a true low-CG advantage without sacrificing strength or reliability. Designed with a machined aluminum case, hardened steel gears, and titanium output shafts, this transmission is built to take abuse while maintaining smooth, precise power delivery. The forward motor mounting improves balance and packaging, while 48-pitch gearing and an easy-set gear mesh with protective cover keep performance consistent even in harsh trail conditions. Whether you’re running straight axles or portals, the XPT3 offers flexible gearing options to dial in the perfect final drive for your setup—making it a serious upgrade for high-end crawler builds. 🔧 Features Ultra-lightweight design — only 75g Compact low-profile (LCG) transmission layout CNC-machined aluminum case for durability Hardened steel gears for long service life Titanium output shafts for maximum strength Forward motor mounting for improved balance Smooth-running 48-pitch gears Easy gear-mesh setup with debris-blocking cover 📐 Specifications Weight: 75g Pinion Range: 11T–20T (48p) Transmission Ratio: 6.75:1 – 12.27:1 Final Drive Ratios (FDR): Straight Axle: 25.31:1 – 46.02:1 Axial Portal Axle: 48.52:1 – 88.21:1 Vanquish F10 Portal Axle: 35.44:1 – 64.43:1 📦 Includes (1) Reefs RC XPT3 LCG Transmission (Silver) ⚠️ Pinion Recommendation Straight axles: 11T Portal axles: 14T(May vary depending on rig setup and motor choice) ✅ Compatibility Axial SCX10 II Axial SCX10 III Vanquish Products VRD Vanquish Products VS4-10 A premium transmission built for serious crawlers—lightweight, strong, and engineered to win.

Read more less

Standard or Lightweight The S2 buggy body from JConcepts is a race-proven shell engineered specifically for the Losi 22X (2025) platform. Born from elite competition and refined over years of development, the S2 delivers a low-profile, high-efficiency aerodynamic package for dirt, carpet, or turf. Precision-molded in clear polycarbonate, the S2 features a sleek, symmetrical design with purposeful airflow management to reduce drag and sharpen corner speed. Available in standard or lightweight thickness, it lets racers fine-tune durability versus weight to match track conditions. About the S2 Buggy Body Streamlined Style, Race-Ready PerformanceCAD-designed lines, a dual-window cab, recessed hood cooling area, and trimmable rear scoops work together to enhance airflow and downforce. A stabilizing center fin and rear side rails improve high-speed tracking and durability, while the body wraps cleanly around the spur gear guard for a perfect fit. Features Low-profile shape minimizes drag and boosts corner speed Trimmable rear sidepod scoops for airflow or added downforce Stabilizing center fin & rear side rails for durability and tracking Recessed hood area for cooling and airflow options Precision fit around the TLR spur gear guard Available in Standard or Lightweight materials Includes (1) TLR 22X “S2” 1/10 Buggy Body (Clear) (2) 6.5" Wings (Aero) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.  

Read more less

The RC10B7 Gear Differential Cap is a genuine replacement part from Team Associated, designed to restore proper function and durability to your RC10B7 gear differential. Precision-molded for a perfect factory fit, this cap helps ensure consistent diff performance and reliability during racing or practice. Ideal for routine maintenance, rebuilds, or replacing worn or damaged components, it installs quickly with no modifications required. Features: Genuine Team Associated replacement part Precision fit for RC10B7 gear differentials Maintains proper differential operation and durability Direct drop-in installation Includes: (1) Gear Differential Cap Compatibility: Team Associated RC10B7 1/10 Buggy  

Read more less

Dial in your steering feel with the Team Associated Factory Team Adjustable KPI Steering Blocks for the RC10B7 and RC10B7D. Designed to work with the Factory Team Adjustable KPI Set (ASC92479), these steering blocks allow racers to fine-tune Kingpin Inclination (KPI) to match track conditions and driving style. This set includes both 3mm and 4mm trailing steering blocks, giving you multiple KPI adjustment options to optimize steering response, corner entry, and mid-corner stability. A must-have tuning option for competitive racers looking to extract maximum performance from their B7 platform. Features: Factory Team adjustable KPI steering block set Multiple KPI options for precise steering tuning Improves steering feel, response, and consistency Designed for use with Factory Team Adjustable KPI Set (ASC92479) Ideal for competitive off-road racing setups Includes: (1) Left 3mm trailing steering block (1) Right 3mm trailing steering block (1) Left 4mm trailing steering block (1) Right 4mm trailing steering block Compatibility: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Vehicle: XBility XBOne 1/28 RWD Chassis The XBility RC XBOne Brass Chassis Weight is a precision tuning component designed to fine-tune weight distribution and improve on-track stability for the XBOne 1/28 Performance RWD chassis. Adding low-mounted brass mass helps lower the center of gravity, increasing rear traction and overall consistency during aggressive driving. Ideal for racers looking to dial in balance, rotation, and grip without altering suspension geometry. ⚙️ Features Solid brass construction for added low-mounted weight Improves stability and rear traction Helps lower center of gravity Ideal for fine chassis balance tuning Direct fit for XBility XBOne chassis 📦 Includes (1) Brass Chassis Weight  

Read more less

The XBility Nova GT Lexan Body is a lightweight, clear body shell designed specifically for the XBility XBOne / Nova GT platform. Perfect for racers and builders who want full creative control, this clear Lexan body allows you to create custom paint schemes while maintaining excellent durability and aerodynamic performance. Precision molded for an exact fit, the Nova GT body protects key components without adding unnecessary weight—making it a great choice for both competition and casual running. 🎨 Customization Ready Clear Lexan construction for custom paint designs Easy to trim, paint, and mount Ideal for racers who want a unique look on track 🏁 Performance & Fit Lightweight Lexan material for improved performance Precision molded for the XBOne chassis Maintains aerodynamic efficiency Protects internal electronics and components ✅ Features Clear Lexan body for custom paint jobs Durable and crack-resistant material Exact-fit design for XBOne / Nova GT Clean, race-inspired body profile 📦 Includes (1) XBility Nova GT / XBOne Lexan Body (Clear)

Read more less

Replace worn or damaged rear protection with the Team Associated SC6.1 Rear Bumper Assembly. Designed as a direct factory replacement, this rear bumper restores proper protection and fitment for your short course truck after hard racing or bashing sessions. This kit includes all required plastic components needed to assemble one complete rear bumper, making it an easy, hassle-free replacement. Features Genuine Team Associated replacement part Direct factory-spec fit Restores rear-end protection and durability Ideal for repairs, rebuilds, or spares Compatibility Team Associated RC10 SC6.1 Team Associated RC10 SC6.2 Includes Rear bumper plastic parts to assemble one complete bumper

Read more less

Restore proper suspension alignment and strength with the Traxxas Sledge Front & Rear Suspension Pin Set. This genuine replacement hardware set includes all required suspension hinge pins and flanged nuts needed to service the front and rear suspension on the Traxxas Sledge. Ideal for repairs after hard bashing sessions or for routine maintenance, this kit ensures factory-spec fit and durability. Features Genuine Traxxas replacement hardware Factory-spec suspension pins for precise fit Restores proper suspension alignment and performance Ideal for repairs, rebuilds, or spare parts Compatibility Traxxas Sledge Includes (4) 4×67mm Suspension Pins (2) 3.5×48.2mm Suspension Pins (2) 3.5×56.7mm Suspension Pins (4) 3×0.5mm Flanged Nuts

Read more less

Keep ESC temperatures under control with the Traxxas Velineon VXL-8S Cooling Fan. Designed as a direct replacement for the VXL-8S system, this fan helps maintain optimal operating temperatures during high-power runs and extreme bashing sessions. Ideal for replacing a damaged fan or keeping a spare on hand to protect your electronics when pushing big power. Features Genuine Traxxas replacement part Designed for the Velineon VXL-8S system Helps prevent overheating under high loads Direct-fit, plug-and-play installation Compatibility Traxxas Maxx Traxxas Sledge Traxxas X-Maxx Traxxas XRT Includes (1) Traxxas Velineon VXL-8S Cooling Fan  

Read more less

Replace worn or damaged drivetrain components with the Traxxas TRX-4M High Trail Center Driveshaft Set. These extended center driveshafts are factory-equipped on TRX-4M High Trail Edition models and are precision-engineered for a perfect, hassle-free fit. Designed specifically for the High Trail wheelbase, these driveshafts provide smooth, reliable power transfer to the axles and install easily as a direct replacement using the included hardware. ⚠️ Important: These are extended driveshafts and will NOT fit standard TRX-4M models. Features Genuine Traxxas replacement parts Factory-spec fit for TRX-4M High Trail Edition Extended length for High Trail wheelbase Smooth, reliable drivetrain performance Easy, direct replacement installation Compatibility Traxxas TRX-4M High Trail Edition(Monster Truck & Micro Crawler versions) ❌ Not compatible with standard TRX-4M models Includes (1) Front Center Driveshaft (1) Rear Center Driveshaft (2) O-Rings (2) Pins (6) Mounting Screws  

Read more less

Upgrade strength, durability, and style with the Traxxas Aluminum Bulkhead Front & Rear Tie Bar Set. Designed as a direct replacement for the stock components, these aluminum tie bars add rigidity to the chassis while reducing flex under hard acceleration, landings, and aggressive driving. Machined from high-quality aluminum and anodized in multiple color options, this set not only improves performance but also adds a clean, factory-upgrade look to your Traxxas 4x4 platform. Features Precision-machined aluminum construction Increased chassis rigidity and durability Reduces flex under high loads and impacts Factory-fit replacement for easy installation Available in multiple anodized colors for custom styling Compatibility Traxxas Hoss Traxxas Rally Traxxas Rustler 4x4 Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4 Includes (1) Front Aluminum Bulkhead Tie Bar (1) Rear Aluminum Bulkhead Tie Bar

Read more less

The Team Losi Racing TLR-1194 Front Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens front sway bar set allows drivers to fine-tune front roll stiffness, helping balance steering response, corner entry feel, and overall chassis control for changing track conditions. A simple, effective tuning tool that works without altering springs or shock setup. 🔧 Features Genuine Team Losi Racing tuning option Front sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Enables fine adjustment of front chassis roll and steering feel Ideal for adapting to different grip levels and layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Front Sway Bars Set ✅ Compatibility Losi 22X  Losi 22X-T

Read more less

The Team Losi Racing TLR-1212 Rear Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens sway bar set allows drivers to fine-tune rear roll stiffness to better suit track grip levels, driving style, and layout demands. A simple and effective way to adjust handling balance without changing springs or shock settings. 🔧 Features Genuine Team Losi Racing tuning option Rear sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Allows fine adjustment of chassis roll and cornering response Ideal for adapting to changing track conditions ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Rear Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Take full control of your scale recovery setup with the INJORA Wireless Remote Receiver Winch Controller Set, designed for most 1/10 RC crawlers. This system gives you easy, wireless operation of your winch—perfect for Traxxas TRX-4, Axial SCX10, RC4WD builds, D90s, Tamiya CC01 rigs, and more. Just power the receiver, bind with the remote, and you're ready to control your winch without needing extra channels on your radio. Compact, easy to install, and incredibly convenient for trail trucks and scale rigs. Note: Winch and receiver shown in some photos are not included. ⭐ Features Compatible with most 1/10 scale RC winches Wireless remote for simple, fast winch control Plug-and-play receiver — easy installation Bind by holding the reset button until the red LED flashes Stable power range: 4.8V–12V Compact size fits easily into scale crawlers Ideal for TRX-4, SCX10, D90, CC01, and similar rigs 📐 Specifications Item: Wireless Winch Controller Quantity: 1 pcs Receiver Size: 41.5 × 31 × 10mm Controller Battery: 3V CR2032 (not included) Power Supply: 4.8–12V (from your receiver) Connection: As shown in wiring diagram/photos 📦 Includes (1) INJORA Wireless RC Winch Controller  

Read more less

Upgrade your drivetrain with the Team Losi Racing 22X 66mm Universal Driveshafts for smoother power delivery and dependable durability. Designed to reduce drivetrain bind and improve efficiency, these shafts help deliver a more consistent feel and improved suspension movement—lap after lap. Features & Benefits Reduces drivetrain bind for smoother operation Hardened steel construction for long-lasting strength Black oxide coating for durability and wear resistance Helps allow more suspension movement Lowers vibration and noise Improves drivetrain efficiency and overall handling feel Compatibility Team Losi Racing 22X platform Includes (2) 22X 66mm Universal Driveshafts  

Read more less

Connect your EC2-equipped batteries to IC2-equipped devices safely and easily with this official Spektrum IC2 Device / EC2 Battery Adapter. Designed for reliability and proper fitment, this adapter ensures secure power transfer when using mixed-connector equipment. IMPORTANT:Spektrum IC2 connectors and EC2 connectors are NOT cross-compatible without an adapter. This adapter is required when connecting EC2 batteries to IC2 devices. Key Features Converts EC2 battery → IC2 device Ensures safe, proper electrical connection High-quality Spektrum construction Ideal for chargers, small-scale vehicles, and Smart-ready equipment using IC2 Eliminates the risk of forcing incompatible connectors Includes (1) Spektrum IC2 Device to EC2 Battery Adapter – SPMXCA321  

Read more less

Upgrade your Axial SCX24 with the performance it deserves. The Pro-Line Aluminum Big Bore Scaler Shocks are a premium replacement for the stock plastic friction dampers, delivering smoother articulation, better control, and true oil-filled damping—all in a beautifully machined aluminum package. Designed specifically for micro crawlers, these shocks offer incredible tunability thanks to a threaded body design and leak-resistant double O-ring seals. Whether you're running a lightweight comp build or a scale rig with heavy accessories, these shocks dramatically improve suspension performance. Key Features Fully assembled and ready to install Perfect fit for Axial SCX24 and other 1/24 crawlers using 1.4mm hardware True threaded, oil-filled shock design for real damping CNC-machined aluminum caps, bodies, and lower caps Polished steel shock shafts for smooth travel Double O-ring seal prevents leaks and keeps damping consistent Includes optional stiff springs for heavier bodies or tuning preference Length: 1.32" (34mm) Specifications Scale: 1/24 Length: 1.32" (34mm) Material: CNC-machined aluminum Includes (4) Pro-Line Aluminum Big Bore Scaler Shocks Optional tuning springs

Read more less

The legendary MIP drivers you know and trust—now evolved. The MIP Gen 2 Ball Hex Driver (2.5mm) retains the iconic amber handle and precision feel that RC enthusiasts have relied on for over 30 years, but introduces upgraded materials, improved durability, and clearer identification for today's demanding builds and repairs. Whether you're wrenching on race vehicles, bashers, crawlers, or shelf queens, this premium driver delivers unmatched comfort, accuracy, and longevity. Why Gen 2 Is Better The updated Gen 2 series brings thoughtful refinements without losing MIP’s signature look.Key upgrades include: Black Oxide coating for maximum durability and corrosion resistance Laser-etched size markings that stay visible forever Color-coded identification ring for quick toolbox spotting Thin-wall tool head for reaching tight spaces Ergonomic angled head for more natural hand positioning These improvements create a cohesive, professional feel across your entire tool lineup. Key Features Precision 2.5mm ball hex tip Black Oxide coated for long service life Laser-engraved size and MIP branding Polycarbonate handles remain comfortable in hot or cold weather Thin-wall head for maximum clearance Hand-assembled, manufactured, and packaged 100% in the USA Built for pro-level accuracy and durability Includes (1) MIP Gen 2 Ball Hex Driver – 2.5mm

Read more less

🚙🎨 Fresh Look. Factory Fit. Choose Your Style. Upgrade or replace your Mini Maxx® body with genuine Traxxas options. Whether you want a ready-to-run pre-painted finish or a customizable ProGraphix® design, this listing gives you the flexibility to choose the perfect look for your build. 🏁 About These Bodies 🎨 Two Style Options Pre-Painted BodiesReady to install right out of the box with factory-applied color and graphics—perfect for quick upgrades or replacements. ProGraphix® BodyFeatures pre-printed graphics with a clear base, allowing you to add your own paint color for a fully custom finish. 🔧 Key Features ✔ Genuine Traxxas replacement bodies✔ Direct fit for Mini Maxx® platform✔ Available in pre-painted or ProGraphix® styles✔ Factory-trimmed for easy installation✔ Durable polycarbonate construction✔ Clipless mounting compatibility 📦 Includes (1) Traxxas Mini Maxx® Body (style selected) 🎨 Available Options (Variants) 🟢 Pre-Painted [Insert Color Options Here – Blue, Red, etc.] 🎨 ProGraphix® Clear body with printed graphics (requires paint) 📊 Compatibility Traxxas Mini Maxx® 🧰 Notes ProGraphix® body requires paint for final color Pre-painted bodies are ready to install Vehicle shown in photos is not included 💡 Perfect For ✔ Replacing damaged bodies✔ Custom builds and paint projects✔ Quick visual upgrades  

Read more less