Team Associated FT 3x21mm V2 Chrome Shock Shafts – ASC91616 Precision Replacement for Ultra-Smooth Suspension The Factory Team 3x21mm V2 Chrome Shock Shafts are designed as high-quality replacements for use with the #91576 V2 shock bodies. Built with durability and performance in mind, these shafts feature a chrome finish to reduce friction and wear—delivering smooth and consistent suspension action on every run. ⚙️ Features: ✅ Chrome-plated for reduced friction and long wear life ✅ Factory Team quality for high performance ✅ Designed for use with V2 shock bodies ✅ Direct fit for #91576 📦 Includes: (2) 3x21mm V2 Chrome Shock Shafts ✅ Compatibility: Fits #91576 V2 Shock Bodies Vehicles using #91576 shocks (check vehicle manual for confirmation) 🏁 Keep your suspension running smooth and race-ready with Factory Team precision!

Read more less

Team Associated RC10B7 FT Adjustable KPI Set – ASC92479 Fine-Tune Your Front End for Any Track Condition The Factory Team Adjustable KPI (KingPin Inclination) Set gives you race-proven steering geometry flexibility for your RC10B7. Originally featured on prototype models, this advanced tuning option is now available to all racers looking to optimize handling for different surfaces—from low-grip dirt to high-traction clay or carpet. ⚙️ Features: ✅ Precision adjustable KPI set for RC10B7 ✅ Nine distinct KPI settings for optimal tuning range ✅ Includes 3mm and 4mm trailing steering blocks ✅ Enhance corner entry, steering feel, and overall stability ✅ Factory Team engineered for high-level performance 📦 Includes: (2) Adjustable KPI Steering Blocks (1) 3mm Trailing Block Set (1) 4mm Trailing Block Set (Kit Default) Supplement with setup steps and KPI values ✅ Compatibility: RC10B7 🏁 Elevate your steering control and tailor your B7 to any surface with this ultimate front-end tuning kit!

Read more less

Team Associated RC10B7 HD Ball Differential Outdrive Set – ASC92453 Heavy Duty Upgrade for Peak Performance The HD Ball Differential Outdrive Set is a direct replacement for your Team Associated RC10B7, designed to handle the demands of competitive racing. Built for durability and strength, these outdrives are ideal for racers who push their 1/10 scale buggies to the limit. ⚙️ Features: ✅ Heavy duty design for improved durability ✅ Compatible with the RC10B7 ball differential ✅ Precision machined for smooth operation ✅ Essential upgrade for high-stress racing conditions 📦 Includes: (1) Left HD Ball Differential Outdrive (1) Right HD Ball Differential Outdrive ✅ Compatibility: RC10B7 🏁 Strengthen your drivetrain and stay in the race longer with this premium Factory Team upgrade.

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated RC10B74.2 FT Center Dogbone Outdrives – Aluminum – ASC92359 Engineered for Lightweight Speed and Precision. These Factory Team Aluminum Center Dogbone Outdrives are a direct upgrade for the RC10B74 series, designed to be used with the FT Lightweight Driveline Center Kit (#92372). Precision CNC-machined for reduced rotating mass and maximum drivetrain efficiency. 🔧 Features: ✅ Lightweight aluminum construction ✅ CNC-machined for accuracy and durability ✅ Designed for high-performance racing applications ✅ Works with #92372 Lightweight Driveline Kit 📦 Includes: (2) Aluminum Center Dogbone Outdrives ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D Designed for use with ASC92372 FT Lightweight Driveline Ki 🏁 Perfect for racers seeking reduced driveline weight and increased efficiency on the track!

Read more less

Team Associated RC10B74.2 Factory Team Aluminum Center Differential Outdrives (2) – ASC92358 Lightweight Strength for Serious Performance. Upgrade your driveline with these Factory Team Aluminum Center Differential Outdrives, designed specifically for the B74.2 Lightweight Center Driveline Kit (ASC92372). Machined from high-quality aluminum, these outdrives reduce rotational mass while maintaining the strength needed for competitive racing. 🔧 Features: ✅ CNC-machined aluminum construction ✅ Lightweight for improved acceleration ✅ High-strength upgrade over stock components ✅ Precision fit for the B74.2 driveline 📦 Includes: (2) Aluminum Center Differential Outdrives ✅ Compatibility: RC10B74.2 RC10B74.2D Compatible with B74.2 Lightweight Center Driveline Kit (ASC92372) 🏁 Shed weight and gain efficiency—perfect for racers looking to optimize their drivetrain!

Read more less

Team Associated 3.5x44.5mm TiN Rear Shock Shafts (2) Durability Meets Smooth Performance. These 3.5x44.5mm Titanium Nitride-coated rear shock shafts are precision replacements designed for the Team Associated RC8T4 and RC8T4e vehicles. Built to withstand the rigors of 1/8-scale racing, they deliver smooth shock movement and enhanced durability. 🔧 Features: ✅ Titanium Nitride (TiN) Coated for reduced friction and extended wear life ✅ High-Precision Fitment ensures optimal shock performance ✅ 3.5mm Diameter, 44.5mm Length — rear shock compatibility ✅ Built for RC8T4 & RC8T4e Team Associated vehicles 📦 Includes: (2) 3.5x44.5mm TiN Rear Shock Shafts 🏁 Reinforce your rear suspension with Factory Team reliability and proven performance!

Read more less

Team Associated Factory Team Rear Gearbox Pinion Height Inserts – RC10B74.2 Precision Tuning for Peak Gear Mesh Upgrade your drivetrain precision with the Factory Team Machined Rear Gearbox Pinion Height Inserts for the RC10B74.2 and B74.2D. These CNC-machined aluminum inserts allow fine-tuning of your pinion height, ensuring ideal mesh alignment when adjusting differential height settings. 🔩 Features: 🧰 Precision-machined aluminum construction 🎯 Adjustable pinion height ensures proper gear mesh 🔁 Ideal for setups that involve diff height tuning 🔧 Quick and easy installation 📦 Includes: (1) 0–3mm Pinion Height Insert (1) 1–2mm Pinion Height Insert ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🛠️ Factory-level adjustment for competitive edge.

Read more less

Spektrum 4S 10000mAh 120C Smart G2 Pro Basher LiPo Battery – IC5 Insane Capacity. Brutal Power. Built for Bashers. The Spektrum Smart G2 Pro Basher 4S 10000mAh 120C LiPo is a monster pack built for high-demand RC bashers who crave extreme power and runtime. Featuring Graphene LiPo technology and Smart G2 integration, this battery delivers unmatched punch, durability, and intelligent battery management—all in a rugged hardcase. Ideal for 1/5 and 1/6 scale platforms, the massive 10000mAh capacity ensures longer sessions and fewer pit stops, while the 120C discharge rate unleashes relentless acceleration and torque. ⚙️ Features: 🔋 Huge 10000mAh Capacity – For extended runtime on large-scale platforms ⚡ 120C Discharge Rate – Delivers brutal acceleration and sustained power 🧠 Smart G2 Technology – Auto storage, battery data, and safety built-in 🔌 IC5 Connector – Compatible with IC5/EC5 systems for high current delivery 🧱 Hardcase Construction – Tough exterior built to handle abuse ⚙️ Graphene LiPo Chemistry – Improved durability, cooler temps, and longer cycle life 📐 Specifications: Voltage: 14.8V (4S) Capacity: 10000mAh Discharge Rate: 120C Battery Type: Graphene Smart G2 LiPo Connector: IC5 Cell Count: 4S (3.7V per cell) Smart Tech: Yes (G2 - requires Smart G2 charger) Application: Large-scale bashing (1/5–1/6 scale) Hard Case: Yes ⚠️ Note: G2 batteries require a Spektrum™ G2 Smart Charger or earlier Smart Charger with G2 firmware update. Take your bashing to the next level—with next-gen performance, protection, and power from Spektrum Smart G2.

Read more less

Spektrum 3S 1300mAh 50C Smart LiPo Battery – IC3 Connector Intelligent Power with Built-In Safety & Simplicity Upgrade your setup with the Spektrum 3S Smart LiPo Battery, offering 1300mAh of high-performance power and the cutting-edge convenience of Smart technology. With an integrated microchip, this battery stores vital data and communicates directly with Spektrum Smart chargers — making charging safer and easier than ever. Perfect for planes, boats, and crawlers that need compact power without the hassle. ⚙️ Features: 🔌 IC3 Connector – Smart-compatible and EC3 backward-compatible 🧠 Integrated Smart Microchip – Automatically sets charge preferences and logs performance data 🔋 Self-Discharge to Storage Voltage – Automatically maintains battery health 🔧 Simplified Charging – Just plug in and press start on a Smart charger 💡 Real-Time Battery Health Monitoring – Know cell voltage, cycles, temperature & more 📐 Specifications: Voltage: 11.1V (3S) Capacity: 1300mAh Battery Type: Smart LiPo Connector Type: IC3 Cell Count: 3S (3.7V/cell) Smart Discharge: Yes Application: Airplanes, Boats, RC Crawlers ✅ Compatibility: Axial SCX10 Pro E-flite Habu SS 50mm E-flite Slow Ultra Stick HobbyZone AeroScout S HobbyZone Apprentice S 2 Pro Boat Power Boat Racer Deep V Pro Boat Recoil 2 18 ⚠️ Charging Note: Use only Spektrum Smart Chargers to safely charge this battery. Do not use non-Smart chargers. Give your RC models smarter power and worry-free charging with Spektrum Smart LiPo technology.

Read more less

Losi Baja Rey 2.0 Molded Roll Cage Sides Set Genuine Replacement for F100 & F150 Raptor Desert Trucks Maintain the structural integrity and scale realism of your Baja Rey 2.0 with this Molded Roll Cage Sides Set. Designed as a direct replacement for damaged or worn components, this factory-original part keeps your desert truck looking and performing at its best. 🧰 Features: 🔧 OEM Replacement – Designed specifically for the Losi Baja Rey 2.0 F100 and F150 platforms 🧱 Durable Molded Construction – Built to handle tough terrain and impacts 🛠️ Direct Fit – No modifications required 📦 Includes: (1) Molded Roll Cage Sides Set Keep your Baja Rey protected and trail-ready with this essential replacement part!

Read more less

Arrma Aluminum Gearbox Set – ARA311186 Boost Durability & Performance with a Precision Alloy Upgrade Upgrade your Arrma vehicle with the ARA311186 Aluminum Gearbox Set, engineered for enhanced strength and long-lasting reliability. Designed as a direct replacement for stock components, this aluminum gearbox is ideal for high-performance builds and bashers pushing their rigs to the limit. 🛠️ Features: 💪 CNC-Machined Aluminum – Increases structural strength and durability ⚙️ Precision Fit – Ensures optimal gear mesh and drivetrain alignment 🔧 Direct Replacement – Compatible with select Arrma vehicles without modification 🔒 Enhanced Heat Dissipation – Helps keep temperatures down during intense runs ✅ Compatibility: Arrma Kraton 6S BLXArrma Kraton 6S EXBArrma Notorious 6S BLX *Check your vehicle’s manual or Arrma parts listings to ensure fitment for your specific model. 🏁 Perfect for hardcore bashers or racers looking to reduce flex, increase drivetrain efficiency, and extend gearbox life!

Read more less

Team Associated Differential Outdrive Shims (14pc) – RC10 B74 Precise Tuning for Your 4WD Drivetrain Optimize the fit and function of your RC10 B74 drivetrain with this Team Associated Differential Outdrive Shim Set. Designed as direct replacements for the kit-supplied parts, these precision shims allow you to fine-tune outdrive spacing and reduce slop for smoother, more efficient drivetrain performance. 🔧 Features: 🔩 Precision Tuning Parts – Designed to eliminate excess play in differential outdrives ⚙️ Direct Replacement – Ideal for use with the RC10 B74 1/10 4WD Buggy 🧷 Multiple Thicknesses – Mix and match to achieve perfect spacing 📦 Includes: (10) 0.1mm Outdrive Shims(4) 0.25mm Outdrive Shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less

⚡ Hobbywing XR10 Pro G3 1/10 160A ESC – Advanced Modified-Class Dominance 🏁 Built for the most demanding modified-class racers, the Hobbywing XR10 Pro G3 delivers the edge you need to compete at the highest level. 🔥 This ESC is engineered for 1/10 touring cars and buggies, offering unmatched control, top-tier power delivery, and advanced customization. Featuring reverse polarity protection, smart cooling, and variable frequency control, the Pro G3 adapts to changing track conditions with precision and durability. ✨ Key Features: ⚡ 160A Continuous Current – Handles aggressive modified-class motors with ease🛡️ Reverse Polarity Protection – Prevents damage from incorrect battery connection (*see note below)📊 Built-In Data Logging – Monitor throttle, voltage, current, temperature, RPM & more🔧 Three Customizable Profiles – Adapt settings to on-road, off-road, or track-specific setups🌀 Frameless Cooling Fan – Durable, debris-resistant, smart on/off function🔁 Variable Frequency PWM & Brake Control – Precision tuning for throttle and braking response💨 Softening Power Delivery – Fine-tunes acceleration for smoother, controlled launches🛑 Disc Brake Mode – Enhanced braking performance for tighter control🛡️ ESC & Motor Thermal Protection – Built-in safeguards for reliability and longevity 📦 What's in the Box? ✔️ (1) Hobbywing XR10 Pro G3 160A ESC (Titanium Grey)✔️ (1) Cooling Fan (Frameless, Smart-Stop Enabled)✔️ Decals & Accessories✔️ User Manual 📊 Specifications: Application: 1/10 Touring Car & Buggy (Modified) Motor Type: Sensored & Sensorless Brushless Input Voltage: 2S LiPo Only Continuous Current: 160A Peak Current: 1200A Motor Limits:• Touring Car: ≥ 4.5T• Buggy: ≥ 5.5T BEC Output: 5V–7.4V (Adjustable) @ 5A Size: 35 x 33.6 x 30.3mm Weight: 93g Connectors: Solder Tabs (Motor/Battery) Programmable: Yes (OTA Module or LCD Program Box Pro)** 📌 Tech Note: While the ESC has reverse polarity protection, the capacitor is still vulnerable to reverse connection damage. Always double-check wiring before connecting. 📌 Programming Tools: OTA Programmer: 30850400 LCD Program Box Pro: 30502002 🏁 The ESC Trusted by Champions Whether you're tearing up the asphalt or launching over jumps, the XR10 Pro G3 delivers rock-solid consistency and peak performance in every class-legal 1/10 modified setup. 💡 Dominate the Track – Upgrade to Hobbywing XR10 Pro G3 Today!

Read more less

Losi Front Skid Plate & Support Brace (LOS251106)Essential Protection for Your Super Baja Rey 2.0 The Losi Front Skid Plate and Support Brace (LOS251106) is a genuine replacement part designed specifically for the Super Baja Rey 2.0 Desert Truck. This component provides robust protection for the front end of your vehicle, safeguarding it against impacts and rough terrain. Its durable construction ensures longevity and reliability, making it an essential upgrade for maintaining your truck's performance. Features: Genuine Losi replacement part Designed for the Super Baja Rey 2.0 Desert Truck Provides enhanced front-end protection Durable construction for long-lasting use Compatibility: Losi Super Baja Rey 2.0 Desert Truck Includes: (1) Front Skid Plate (1) Support Brace Product Specifications: Part Number: LOS251106 Material: High-quality composite Color: Black Note: This product is a replacement part and does not include additional hardware.

Read more less

Concepts F2 Clear Body w/ Wing – Losi Micro-B🏁 Aggressive Style, Proven Performance The JConcepts F2 Body for the Losi Micro-B brings race-proven aerodynamics and championship-winning style to the world of 1/28-scale racing. Borrowing key elements from the successful Finnisher line, this sleek and aggressive body is engineered to perform on tight indoor tracks packed with jumps, sweepers, and high-speed corners. With a forward cab bias, sharp windshield angle, and low-profile side-pods, the F2 delivers both improved rotation and enhanced mid-air stability. The simplified design reduces turbulence and unwanted drag, making it a standout on both carpet and turf. A micro-sized carpet/turf/dirt rear wing is included to round out the package with adjustable downforce for any track layout. 🔧 Note: Designed to attach using hook and loop tape (not included), just like the stock body. ✨ Key Features: JConcepts F2 styling, optimized for the Losi Micro-B platform Forward cab placement for improved steering response Steep windshield angle for better jump handling and flight stability Sculpted side-pods with dual-step scoop treatment Rear cab step and louver detailing Includes micro-size carpet/turf/dirt wing Clear polycarbonate with overspray film Includes window masks and JConcepts decal sheet 📦 Includes: (1) Clear F2 Body for Losi Micro-B (1) Micro Carpet/Turf/Dirt Rear Wing (1) Window Mask Sheet (1) JConcepts Decal Sheet Compatibility: Losi Micro-B ⚠️ Body requires trimming and painting. Painted body shown for reference only.

Read more less

JConcepts S15 Lightweight Body for XRAY XB4 2024 – Includes Carpet, Turf, and Dirt Wings🏁 Lighter. Lower. Faster. Take your XRAY XB4 2024 to the next level with the JConcepts S15 Lightweight Clear Body—a championship-winning design refined for precision, response, and aerodynamic dominance. Made from lightweight polycarbonate to reduce weight up high, this body offers improved rotation and quicker acceleration while retaining the winning features of the original S15 shell. From its aggressive cab-forward stance and signature “V” Finnisher shape to mid-body winglets and a rear climbing spoiler, every design detail works in harmony to improve balance and downforce. Built specifically for the XRAY XB4 2024, it hugs the chassis with a factory fit that reduces turbulence and improves consistency on high-bite surfaces. 🎯 Ideal for racers seeking that extra edge in competitive 1/10 4WD buggy racing. ✨ Key Features: Lightweight version for improved performance and faster response Forward-biased cab and aggressive S15 styling Roof fin enhances straight-line tracking and crash stability Sidepod winglets improve aerodynamic mid-body pressure Rear climbing spoiler adds valuable rear traction Precision fit for XRAY XB4 2024 with minimal trimming required Includes (2) 6.5" rear wings (Carpet/Turf/Dirt) Clear lightweight polycarbonate with overspray film Includes window masks and JConcepts decals 📦 Includes: (1) Lightweight S15 Clear Body for XRAY XB4 2024 (2) 6.5" Rear Wings (Carpet/Turf/Dirt) (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Body comes clear and uncut. Painted body shown for illustration only. Compatibility: XRAY XB4 2024

Read more less

JConcepts F2 Lightweight Body for XRAY XB4 2024 – Includes Two 6.5" Wings💨 Championship-Proven Aero, Now in Lightweight Form Take your XRAY XB4 2024 to the next level with the JConcepts F2 Lightweight Body — designed for racers chasing every ounce of performance. Based on the IFMAR World Championship-winning design, the F2 body blends a forward cab bias, louvered roof, and signature Finnisher “V” styling for ultimate responsiveness and downforce. Now molded in a lightweight polycarbonate, this variant reduces overall mass for quicker transitions, faster acceleration, and a more planted feel on high-grip surfaces. Perfectly contoured to the XRAY XB4 2024 chassis, the F2’s tight layout offers plenty of clearance for your battery, servo, and motor configuration, while delivering a clean fit around the front bulkhead and top deck. ✨ Key Features: Lightweight polycarbonate construction for reduced mass Direct fit for XRAY XB4 2024 Forward cab bias with aggressive windshield angle Louvered roof, double-step side-pods, and rear kick-up for stable aero Accommodates modern 4WD electronics layouts Includes (2) 6.5" Carpet | Turf | Dirt Wings Window masks and JConcepts decal sheet included 📦 Includes: (1) Clear Lightweight F2 Body for XRAY XB4 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility:  • XRAY XB4 2024

Read more less

JConcepts F2 Standard Body for XRAY XB4 2024 – Includes Two 6.5" Wings🏁 Championship Aero Performance for Modern 4WD Racing The JConcepts F2 Standard Body for the XRAY XB4 2024 delivers a proven aerodynamic profile built for serious performance on dirt, carpet, and turf. Born from the IFMAR World Championship-winning design, this F2 body features a forward cab bias, louvered roof, and Finnisher “V” side-pod shaping — all blended for unmatched steering response and high-speed stability. Designed to hug the XRAY XB4 2024 chassis with precision, this body maintains a tight profile while allowing room for varied battery positioning, motor clearance, and front bulkhead geometry. The double-step side-pods, extended rear mounting ledge, and chamfered contours provide a clean fit with standout style. ✨ Key Features: Direct fit for XRAY XB4 2024 Clear polycarbonate in standard thickness Forward cab bias for aggressive steering and balance Louvered roof and rear windows improve cooling and rigidity Finnisher-style side-pod and roof contouring for unique aero feel Built-in room for electronics and drivetrain layout Includes (2) 6.5" Carpet | Turf | Dirt Wings Window masks and JConcepts decal sheet included 📦 Includes: (1) Clear Standard Weight F2 Body for XRAY XB4 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility: • • XRAY XB4 2024

Read more less

JConcepts F2 Lightweight Body for XRAY XB2 2024 – Includes Two 6.5" Wings🏁 Lighten Up and Stay Fast – Proven Aero for High-Grip Racing The JConcepts F2 lightweight body for the XRAY XB2 2024 is built for serious racers looking to reduce weight and gain responsiveness on high-bite surfaces like turf, carpet, and polished clay. Based on the same winning layout as the standard F2, this lightweight version trims the fat while keeping all the performance you expect from a JConcepts shell. Featuring the signature forward cab bias, dual rear windows, and Finnisher "V" side-pod design, the F2 body offers maximum downforce, clean airflow, and high-speed stability. The slim profile hugs the XB2 2024 chassis perfectly, with built-in clearance for spur gear guards and space for electronics and wiring. ✨ Key Features: Direct fit for the XRAY XB2 2024 platform Clear lightweight polycarbonate for reduced weight and snappier handling Original JConcepts F2 profile with aggressive styling and aero balance Dual step side-pods and cab-forward layout for optimal steering response Includes (2) 6.5" Carpet | Turf | Dirt Wings Spur gear guard clearance molded into the body Comes with window masks and full decal sheet 📦 Includes: (1) F2 Clear Lightweight Body for XRAY XB2 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for illustrative purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

JConcepts XRAY XB2 2024 "S15" Lightweight Clear Buggy Body w/Two Wings Premium Lightweight Option for Maximum Performance Dominate the track with the lightweight version of the JConcepts "S15" Buggy Body, precision-molded for the XRAY XB2 2024 Carpet and Dirt platforms. This body features the same aerodynamic enhancements and aggressive styling as the standard S15 — now in a thinner polycarbonate for reduced weight and sharper handling. Mid-body winglets, a cockpit shark fin, and a raised rear profile give your buggy the downforce, stability, and fitment needed to perform at its peak. Ideal for racers chasing every last tenth of a second, the lightweight S15 is a go-to choice for competitive events where agility and response matter most. ✨ Features: 💨 Lightweight Polycarbonate Construction – Reduces overall weight for quicker response and better rotation 🧭 Forward Cab Bias – Enhances steering feel and directional control 🛡️ Mid-Body Winglets & Stabilizer Kick-Up – Adds side bite and rear grip 🦈 Cockpit Shark Fin – Improves high-speed stability and structural integrity 🧰 Raised Rear Side-Pods – Fits tall shorty packs or saddle pack layout ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Lightweight Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted image is for reference only.

Read more less

  Traxxas X-Maxx WideMaxx Steel Constant Velocity DriveshaftHeavy-Duty Strength for WideMaxx Builds Upgrade your drivetrain with the Traxxas X-Maxx WideMaxx Steel Constant Velocity Driveshaft, built tough for maximum durability. This steel CV driveshaft is a direct replacement when running the Traxxas WideMaxx Suspension Kit (TRA7895), providing reliable performance under extreme loads, harsh terrain, and high-speed abuse. Designed for hardcore bashers and racers alike, this is the go-to upgrade for reinforced strength where it matters most. 💪 Features: Hardened steel construction for maximum durability Specifically engineered for WideMaxx suspension setups Delivers smooth power transfer under extreme conditions Ideal upgrade for high-power 8S systems 📦 Includes: (1) Steel Constant Velocity Driveshaft ✅ Compatibility: Traxxas X-Maxx Traxxas XRTFor use with Traxxas WideMaxx Suspension Kit (TRA7895) ⚙️ Built to handle the toughest terrain — add strength and confidence to your WideMaxx build with this genuine Traxxas upgrade!

Read more less

Traxxas Rear Stub Axle Carriers (2)Fits XRT & X-Maxx Upgrade or replace your rear stub axle carriers with this genuine Traxxas Rear Stub Axle Carrier Set. Originally designed as a replacement for the Traxxas XRT race truck, these carriers also double as a durability upgrade for the X-Maxx. Made to withstand high-impact conditions, they ensure proper alignment and smooth rear drivetrain performance. 📦 Includes: (1) Left Rear Stub Axle Carrier (1) Right Rear Stub Axle Carrier ✅ Compatibility: Traxxas XRT (Direct Replacement) Traxxas X-Maxx (Optional Upgrade) 🔩 Built tough for hard hits and rough terrain — get your rear suspension back on track with Traxxas quality!

Read more less

Traxxas X-Maxx/XRT Metal Transmission Output Gear (51T)(Requires TRA7785X Steel Input Gear) Upgrade your drivetrain with the Traxxas 51T Steel Transmission Output Gear for the X-Maxx and XRT! Built from durable metal, this high-strength gear is designed for heavy-duty performance and extreme torque applications. Ideal for high-powered 8S setups, it delivers superior durability and wear resistance over the stock gear. 🔧 Important: This gear must be used with the TRA7785X Steel Input Gear for proper operation. 📦 Includes: (1) 51T Steel Transmission Output Gear ✅ Compatibility: Traxxas X-Maxx Traxxas XRT 🛠️ Toughen up your transmission and stay in the game — even under the harshest conditions!

Read more less

  Traxxas X-Maxx/XRT Differential Gear Set (Front or Rear) Keep your drivetrain running strong with the Traxxas X-Maxx/XRT Differential Gear Set. This OEM replacement includes all the internal gears needed to rebuild one complete front or rear differential. Designed for high-torque 8S performance, it's a must-have for racers and bashers who push their trucks to the limit. 💡 Tip: When rebuilding, refill with diff fluid. Traxxas recommends 10,000W in the front and 30,000W in the rear. 📦 Includes: (2) Output Gears (4) Spider Gears (2) Thin Diff Washers(Enough to rebuild one diff — front or rear) ✅ Compatibility: Traxxas X-Maxx (#77086-4) Traxxas XRT 🛠️ Rebuild. Refresh. Race again. Stock up and stay ready for anything the track throws your way!

Read more less

Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier (Requires TRA7783X) Upgrade your drivetrain durability with the Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier. Precision-machined from aluminum, this housing offers increased strength and improved heat dissipation for high-performance 8S setups. It's designed specifically for models equipped with the Torque-Biasing Center Drive and reinforced front/rear differentials. 🔧 NOTE: Requires TRA7783X Spider Gear Shaft & Spacer Set for proper installation. ✅ Features: 🏗️ CNC-machined aluminum for enhanced durability and precision ⚙️ Ideal for high-stress, high-speed 8S bashing and racing 🧊 Improved heat dissipation over stock composite housings 🔩 Designed for use with front/rear diffs and Torque-Biasing Center Drive systems 📦 Includes: (1) Aluminum Differential Housing Carrier 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🏁 Stronger. Cooler. Race-Ready. Upgrade your differential housing to aluminum today.

Read more less

Traxxas X-Maxx/XRT Differential Housing Carrier This is a replacement Traxxas X-Maxx/XRT Differential Housing Carrier, complete with included gaskets and washers for a proper seal and smooth installation. Built tough to handle the intense power and punishment of 8S brushless systems, this part keeps your front or rear differential securely housed and operating at peak performance. ✅ Features: 🔩 OEM replacement for X-Maxx and XRT platforms 🧱 Reinforced composite housing for durability under extreme loads ⚙️ Includes gaskets and washers for proper sealing and fitment 🔧 Essential for differential maintenance or rebuilds 📦 Includes: (1) Differential Housing Carrier (1) Gasket Set (1) Washer Set 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🔧 Engineered to endure. Built to fit. Backed by Traxxas.

Read more less

Traxxas X-Maxx Aluminum Stub Axle (Black-Anodized) – For Use with TRA7750X HD Driveshaft Upgrade your X-Maxx with this black-anodized aluminum stub axle, engineered for use only with the 8S-spec heavy-duty driveshaft (#7750X). Crafted from premium aluminum and finished in stealthy black, this stub axle is a durable and stylish enhancement for serious bashers. ✅ Features: 🖤 Precision-machined aluminum construction 🛡️ Black-anodized finish for a sleek, rugged look ⚙️ Designed exclusively for use with TRA7750X HD driveshafts 🧰 Genuine Traxxas accessory for a perfect fit 📦 Includes: (1) Black-Anodized Aluminum Stub Axle 🔧 Compatibility: ✅ Traxxas X-Maxx (8S) – Model #77086-4 ⚠️ For use only with Traxxas Heavy Duty Driveshafts (#7750X) 💥 Built tough. Looks sharp. Performs flawlessly.

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less

Team Associated RC10B7 Aluminum Rear Ballstud Mount – Lightweight & Durable Upgrade 🔧 The Team Associated RC10B7 Aluminum Rear Ballstud Mount is a precision-machined replacement part designed to enhance strength and consistency in your buggy’s rear suspension. Built from lightweight aluminum, this mount ensures durability and minimizes flex under load, helping maintain consistent camber gain and suspension response during high-speed cornering. 🔧 Key Features: ✅ CNC-machined aluminum for precision and durability✅ Reduces flex for consistent camber and roll-center performance✅ Lightweight design helps lower unsprung weight✅ Simple drop-in replacement for stock rear ballstud mount 📦 Includes: (1) Aluminum Rear Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Strength where it matters most.Upgrade your rear suspension with this high-precision aluminum ballstud mount for improved performance lap after lap. 🏁

Read more less

Team Associated RC10B7 8mm Blue Aluminum Shock Bushings – Lightweight & Durable 🔩 Keep your suspension functioning smoothly with Team Associated RC10B7 8mm Blue Aluminum Shock Bushings. Designed as a direct replacement for the RC10B7 and RC10B7D buggies, these anodized aluminum bushings offer precise fitment and durable performance without the added weight of steel. 🔧 Key Features: ✅ Lightweight blue anodized aluminum construction✅ Maintains proper shock alignment for consistent handling✅ Simple, drop-in replacement for stock bushings✅ Designed specifically for RC10B7 platforms 📦 Includes: (2) 8mm Aluminum Shock Bushings (Blue) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Reliable suspension starts with the right components.Upgrade your RC10B7 with these precision aluminum shock bushings and keep your rig race-ready! 🏁  

Read more less

Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm) – Fine-Tune Your Suspension! 📈 Dial in your shock performance with the Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm). These precision-machined pistons are ideal for customizing your shock's rebound and compression characteristics, allowing racers to adapt to various track conditions and driving styles. 🔧 Key Features: ✅ 13mm piston diameter with 2x1.9mm holes✅ 2.5mm thickness for controlled oil flow✅ CNC-machined for consistent performance✅ Ideal for tuning shock response and rebound speed✅ Factory Team quality for precision suspension setups 📦 Includes: (2) 13mm Shock Pistons (2x1.9mm, 2.5mm thick) ✅ Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 B6.4 Team Associated RC10 B6.4D Team Associated RC10 B74.2 Team Associated RC10 B74.2D Team Associated RC10 B74.2 CE 💡 Precision matters.Upgrade your suspension tuning with these Factory Team pistons for the ultimate in control and consistency. 🏆  

Read more less

Hobbywing EZRun MAX5 HV G2 ESC & 56118SD 800kV Motor Combo – Unmatched 1/5 Scale Brushless Power! 💣 When only the most powerful setup will do — the MAX5 HV G2 delivers extreme torque, smooth throttle response, and smart cooling technology to keep your 1/5 scale rig running cool and wild.Designed for serious bashing and racing, this sensored ESC/motor combo provides brute power, intelligent control, and waterproof confidence to dominate any terrain. 🔥 Key Features: EZRun MAX5 G2 ESC✅ 250A Continuous / 1600A Peak Current – Built for large-scale torque✅ IP67 Waterproof Rating – Run in mud, snow, or rain✅ Intelligent Freewheeling Tech – Improves efficiency, lowers temps✅ Turbo Timing for Increased Acceleration✅ Adjustable BEC: 6.0V–8.4V @ 25A Peak✅ 8mm Bullet Connectors for Maximum Current Flow 56118SD G2 Sensored Brushless Motor✅ 800kV Output – Ideal for 8–12S LiPo setups✅ 4-Pole Rotor Design – Delivers massive torque and explosive launches✅ Detachable Design – Easy maintenance access✅ Waterproof Sensor Interface✅ Spiral CNC Aluminum Shell for max cooling✅ Explosion-Proof Rotor Construction 📦 What’s Included: (1) Hobbywing EZRun MAX5 G2 1/5 Scale Waterproof Brushless ESC (1) Hobbywing 56118SD G2 4-Pole Sensored Brushless Motor (800kV) 📊 Specifications: ESC: Application: 1/5 Scale Continuous Current: 250A Peak Current: 1600A Input Voltage: 6–12S LiPo (up to 44.4V) BEC Output: 6V / 7.4V / 8.4V (Adjustable) Dimensions: 94.5 x 59.4 x 50.9mm Weight: 428.5g Connectors: 8mm bullets Motor: KV Rating: 800kV Voltage Range: 8–12S LiPo Poles: 4 Diameter: 56mm Length: 119.2mm Shaft: 8mm x 30mm Weight: 1277g Front/Rear Bearing: D22D8T7 / D19D5T6 ✅ Perfect For: ARRMA Kraton 8S & Outcast 8S Losi 5IVE-T & DBXL-E Custom 1/5 Scale Builds Hardcore Bashers & Competition Racers 🏁 Dominate Your Terrain with Hobbywing’s Most Advanced 1/5 Scale Combo Yet! 💨 From full-throttle launches to long bash sessions, the MAX5 HV G2 + 56118SD 800kV combo gives you unmatched performance, reliability, and confidence in every drive.

Read more less

Team Associated RC10B7 Factory Team Titanium Top Shaft Screw – Lightweight Strength for Maximum Acceleration! 🔩 Give your RC10B7 or RC10B7D the performance edge with the Team Associated Factory Team Titanium Top Shaft Screw!This ultra-lightweight titanium screw reduces rotating mass, helping to boost acceleration and throttle response — a small upgrade that makes a big difference on the track. ✨ Key Features: 🔩 Titanium Construction – Strong, durable, and extremely lightweight 💨 Reduces Rotating Mass – Improves acceleration and throttle response 🔧 Direct Fit Upgrade – Perfect replacement for the stock top shaft screw 🏁 Factory Team Quality – Trusted performance from Team Associated’s championship-winning engineering 📦 Includes: ✔ (1) Titanium Top Shaft Screw 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Recommended for racers looking to reduce drivetrain weight and gain a performance advantage.🔹 Direct replacement for stock steel top shaft screw. 🏁 Fine-tune your drivetrain for faster acceleration with the Factory Team Titanium Top Shaft Screw! 🔥 Lighten your setup and race ahead with Team Associated Factory Team upgrades! 🔥

Read more less

Team Associated RC10B7 6.5mm Aluminum Front Axles (2) – Lightweight Strength for Precision Racing! 🔩 Refresh your buggy’s front-end performance with the Team Associated RC10B7 6.5mm Aluminum Front Axles!Designed as a direct replacement for the RC10B7, these lightweight aluminum axles reduce rotating mass for quicker acceleration and sharper handling without sacrificing durability. ✨ Key Features: 🔩 Lightweight 6.5mm Aluminum Construction – Reduces unsprung weight for faster response and improved handling 🏁 Direct Replacement Design – Perfect fit for Team Associated RC10B7 🛡️ Durable and Race-Ready – Built to withstand the rigors of competitive off-road racing 🔧 Precision Machined – Ensures smooth performance and proper fit with your hubs and bearings 📦 Includes: ✔ (2) 6.5mm Aluminum Front Axles 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D ✅ Team Associated DC10 Drift Car 📌 Note: 🔹 Use with standard RC10B7 hub assemblies.🔹 A great upgrade for racers looking to shave weight and enhance steering precision. 🏁 Boost your buggy’s front-end performance with the Factory Team Aluminum Front Axles! 🔥 Race lighter and faster with the quality you expect from Team Associated! 🔥

Read more less