Race-proven performance from PN Racing’s KS Compound series — designed specifically for RCP tracks and trusted by top Mini-Z drivers worldwide. These 8.5mm low-profile slick front tires deliver consistent grip, predictable handling, and long-lasting durability. ✅ Low Profile Advantage – At just 1.6mm thick, these mount on 20mm rims for a 23.2mm overall diameter, keeping your Mini-Z planted and responsive.✅ KS Compound Technology – Offers more grip as the tires heat up, making them ideal for long runs and endurance racing.✅ Easy Break-In – For stock class, no truing required — just run a pack and the tires will settle in.✅ Advanced Tuning – In higher classes, only a light true (0.1–0.2mm) is needed for a perfect racing surface.✅ Compound Options – Pick the grip level that matches your track and driving style: KS1130 Super Soft (8.5mm) – Maximum bite KS1134 Soft (8.5mm) – Strong grip, balanced feel KS1138 Medium (8.5mm) – Consistent, versatile KS1142 Hard (8.5mm) – Durable, steady handling Take control of your Mini-Z’s front-end grip with PN Racing’s KS Compound 8.5mm Slicks — engineered for speed, consistency, and championship results.

Read more less

  Keep your suspension tight and responsive with the Team Associated B6 Ballcups. These molded plastic ballcups are designed for smooth operation and long-lasting performance, making them a must-have maintenance item or upgrade for your buggy. Features: Durable molded composite construction Provides a secure and smooth fit on ball studs Helps maintain precise suspension and steering geometry Replacement or spare set for your pit bag Includes:(12) Ballcups Compatibility: RC10B6 RC10B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D  

Read more less

Race smarter and lighter with the ProTek RC 2S 4800mAh 130C LCG Shorty LiPo, engineered with Silicon Graphene+ HV technology for ultimate performance. Weighing only 170g, this lightweight battery delivers serious punch, optimal efficiency, and consistent voltage—perfect for competitive stock or mod racing. 🔋 Features: Lightweight LCG shorty design (only 170g) for ideal chassis balance High voltage 7.6V for max top-end power Massive 130C discharge rating for extreme performance Si-Graphene+ chemistry: lower temps, better runtime, flatter discharge curve Perfect for 2WD/4WD mod, stock classes, and 1/8 e-buggy saddle setups 10C charge rate capable (1C recommended for longevity) ROAR Approved 📦 Includes: (1) ProTek R/C 4800mAh HV Shorty LiPo (2) 5mm to 4mm bullet reducers (2) 5mm bullet connectors (1) 2mm balance bullet connector 📐 Specifications: Voltage: 7.6V (2S HV) Capacity: 4800mAh C-Rating: 130C burst Configuration: 2S1P Watt Hours: 36.48Wh Connector Type: 5mm Bullet Dimensions: 96 x 47 x 20mm Weight: 170g Give your rig the voltage it craves and the weight savings it needs—ProTek Graphene+ is built to win. 🏁

Read more less

Avid 7" Precut High-Clearance Wing (Standard or Lightweight) [AV10129-P-S] Product Overview: After months of development, the Avid 7" Precut High-Clearance Wing is engineered for optimal airflow, durability, and adjustability. Designed to fit all 1/10 scale buggies, this wing offers high clearance wheel cutouts and a low-drag profile, making it a top-tier choice for racers aiming to reduce turbulence while maintaining strength. Features: Precut 7” wing with standard thickness for maximum durability High and large radiused wheel cutouts for superior tire clearance 18.5° rear angle for reduced pressure and low drag without sacrificing strength Small centerline mark for easy centering during installation 8 structural ribs to maintain wing shape during crashes Dual gurney flap options to fine-tune rear traction Embossed AVID logo on the center panel Includes: (1) Avid 7" Precut High-Clearance Wing  Part Number: AV10129-P-S (Standard)/AV10129-P-LW (Lightweight)  

Read more less

Traxxas 12mm Hex Stub Axle Pin & Collar Set Part #: 1654 | Replacement Wheel Hub Set The Traxxas 1654 Stub Axle Pin & Collar Set is a direct replacement for worn or lost hex hubs and axle pins on a wide range of Traxxas vehicles. This kit includes two 12mm hex wheel hubs and four axle pins, ensuring a secure fit for your wheels and reliable power transfer to the ground. 📦 Includes: (2) 12mm Hex Wheel Hubs (4) Stub Axle Pins ✅ Compatibility: Fits most Traxxas 1/10 scale vehicles with 12mm hexes Commonly used in Slash, Rustler, Stampede, and others Always refer to your model’s manual to confirm compatibility.

Read more less

Traxxas EZ-Peak® Plus Charger – 4A NiMH/LiPo w/ iD® Auto Battery Detection Fast, Safe, Smart Charging for Traxxas Batteries The Traxxas EZ-Peak® Plus 4-Amp Charger is the perfect solution for hobbyists looking for simplicity, speed, and safety. Featuring iD® Auto Battery Identification, this charger automatically configures the optimal charge settings for any Traxxas iD-equipped battery—just plug it in and press start! ⚙️ Features: ⚡ Charges 5–8 Cell NiMH or 2S–3S LiPo Traxxas iD® Batteries 🔍 iD® Auto Battery Detection – No settings to adjust or balance plugs to connect 🔒 Built-in Safety Features – Protects against overcharging and short circuits 🔥 4-Amp Fast Charging – Get back on the track quicker 🧠 Advanced High-Resolution Peak Detection – Ensures full, safe charging every time ✅ Simple One-Button Operation 🔌 Compatible Battery Types: NiMH: 5–8 cells (6.0V–9.6V) LiPo: 2S–3S (7.4V–11.1V)Traxxas iD®-equipped batteries only 📦 Includes: (1) Traxxas EZ-Peak® Plus 4A NiMH/LiPo Charger (2970) (1) Power cord Spend less time charging and more time driving—perfect for beginners and pros alike!

Read more less

Jomurema JR-GT01 Mini-Z MR-03 Hard Body Set (98mm) Color Options: Yellow • Pink • Light Blue • Neon Orange • Violet • Light Green • Light Red • White Race-Inspired Precision for Your Mini-Z Take your Mini-Z performance to the next level with the Jomurema JR-GT01 Hard Body Set. Designed for the MR-03 chassis, this pre-painted, aerodynamic body delivers enhanced cornering stability, efficient airflow, and a sleek, aggressive look worthy of the podium. Built for both competitive racers and scale enthusiasts, the JR-GT01 combines precision design with premium finish quality. Performance-Driven Design From its refined aerodynamics to its clipless mounting system, every element of the JR-GT01 is crafted for balance and speed. The lightweight yet durable shell improves responsiveness, while the downforce-focused rear wing keeps your Mini-Z planted through every corner. Features: Race-inspired design with supreme aerodynamics Clipless body system for fast installation and removal Downforce-enhancing rear wing Pre-painted, trimmed, and ready for assembly Designed for competitive Mini-Z MR-03 setups Available in eight vibrant color options Includes: (1) Pre-painted JR-GT01 Hard Body (98mm) (1) Rear Wing (1) Set of Light Lenses (1) Set of Clipless Body Mounts (1) Decal Sheet Compatibility: Kyosho Mini-Z MR-03 Team Associated RC28 Jomurema — Precision, Performance, Perfection.

Read more less

  Get precise, reliable steering with the LC Racing BATAN D135F Metal Gear Servo. Featuring a coreless motor, dual ball bearings, and a full metal gear train, this digital servo delivers speed, torque, and durability for high-performance RC applications. Features: Digital coreless motor for fast, accurate response Full metal gear train for maximum durability Dual ball bearings for smooth, efficient operation High torque and speed for competitive driving 23-tooth spline for secure horn mounting Specifications: Dimensions: 32.2 × 15 × 28.1mm Weight: 30g Torque: 4.4kg/cm @ 6V Speed: 0.08 sec/60° @ 6V Spline: 23T Alternate Option: LCE006 – Same physical dimensions and also metal gear (designed for BHC-1) Includes: (1) BATAN D135F Metal Gear Servo Perfect for upgrading to a strong, precise, and race-ready steering solution.

Read more less

  🔥 Add style and performance to your mini crawler with these premium 1.0" beadlock wheels from BOOF RC. Finished in black and gold with real beadlock function, these wheels are perfect for scale builds and serious crawling. Specs:• Wheel Diameter: 1.0" (27mm)• Width: 15.8mm• Hex: Standard for 1/18 & 1/24 mini crawlers• Material: Brass ring for added weight, aluminum center Features:✔ Real beadlock design – no glue needed✔ Brass beadlock ring for low CG and better traction✔ CNC-machined for a perfect fit✔ Ideal for SCX24, FCX24, and similar rigs 💥 Boost your scale look and crawling performance!BOOF RC – Built for the climb.

Read more less

Losi NASCAR Front Bumper & Splitter Set 🛠️ Bumper and Splitter Overview:The Losi NASCAR Front Bumper and Splitter is a direct replacement designed to maintain durability and performance on your Losi NASCAR platform. Engineered for optimal aerodynamics and impact resistance, this set ensures your vehicle remains race-ready. Features: ✔️ Precision-molded for a perfect fit✔️ Durable construction for high-speed impacts✔️ Maintains aerodynamic efficiency✔️ Official replacement for Losi NASCAR In The Box: 📦 (1) Front Bumper📦 (1) Splitter📦 Hardware Compatibility: ✅ Losi NASCAR  

Read more less

Losi NASCAR Goodyear Eagle Pre-Mounted Tires (4) (Soft) 🏎️ Upgrade your Losi 1/12 NASCAR with officially licensed Goodyear Eagle Pre-Mounted Tires! Designed for maximum grip and handling, these soft-compound tires deliver the performance you need for competitive oval racing. 🔹 Key Features: ✅ Officially Licensed Goodyear Eagle Tires – Authentic NASCAR look and feel.✅ Soft Compound – Provides excellent traction for high-speed racing.✅ Pre-Mounted for Convenience – No glue or assembly required.✅ Durable and Race-Ready – Built to handle intense track action. 📦 In The Box: ✔️ (4) Goodyear Eagle Pre-Mounted Tires 🛠️ Compatibility: ✅ Losi 1/12 NASCAR 🏁 Hit the track with confidence—these tires offer the grip and durability needed for high-speed racing! 🔥

Read more less

  Unlock the full performance potential of your Traxxas vehicle with this 4-cell 14.8V 5000mAh 25C LiPo battery, engineered to deliver serious punch, blazing speed, and extended run times. Designed exclusively for Traxxas vehicles, this iD-equipped Power Cell LiPo ensures perfect compatibility and easy, safe charging when paired with Traxxas iD chargers. ⚡ Key Features: Official Traxxas iD-equipped LiPo battery Designed specifically for Maxx 4S and other Traxxas 4-cell compatible models Delivers maximum power, performance, and runtime Rugged and reliable for high-performance driving 🔧 Specs: Type: LiPo Voltage: 14.8V (4S) Capacity: 5000mAh Discharge Rate: 25C Length: 155mm Width: 45mm Height: 34mm Weight: 16.8oz 🔌 Connector: Traxxas iD High-Current Connector ⚠️ Charging Note:This battery must be charged using a Traxxas iD Battery Charger. Never use a non-iD charger—doing so can cause fire, injury, or property damage.

Read more less

Team Associated RC10T6.2 Factory Team Carbon Front "Gullwing" Arms [71139] 💪 Stronger. Lighter. Faster. Take your RC10T6.2 to the next level with Factory Team Carbon Front "Gullwing" Arms. Engineered with lightweight carbon fiber composites, these arms deliver extreme rigidity and improved handling on high-traction tracks—giving you the edge when it counts. 🔥 Features:✅ Approx. 12% weight savings over “hard” material✅ Ultra-rigid for more predictable handling in high-traction conditions✅ Significantly stronger than standard options✅ Designed for gullwing-style front suspension setups 📦 Part Number: 71139🏁 Brand: Team Associated

Read more less

Traxxas Front Extreme Heavy Duty Driveshaft – Rustler 4X4 – Part 6851ABeefed-Up Strength. Bolt-On Simplicity. The Traxxas 6851A Extreme Heavy Duty Front Driveshaft Assembly is built to handle high-power brushless setups and intense off-road abuse. Pre-assembled and ready to drop in, this driveshaft fits either the left or right front side of your Rustler 4X4. ✅ Fits front left or right side – fully interchangeable✅ Extreme Heavy Duty design – upgraded strength over stock✅ Fully assembled for fast installation✅ Ideal for high-torque applications and heavy bashing✅ Includes screw pin for secure mounting 📦 Includes: (1) Assembled Front Driveshaft (Left or Right) (1) Screw Pin Part #: 6851A Fits: Rustler 4X4 Rustler 4X4 VXL Also compatible with Slash 4X4, Stampede 4X4, and others using the Extreme HD upgrade system 💡 Pro Tip: Upgrade all four corners with Extreme HD shafts for a bulletproof driveline that’s ready for anything.

Read more less

Overview:Keep your shocks and O-rings performing their best with Team Associated Factory Team Green Slime. This silicone-based grease conditions and protects shock O-rings, preventing swelling and tearing while reducing friction. The result is smoother shock action, longer O-ring life, and more consistent suspension performance. Features: Specially formulated silicone grease for shock O-rings and seals Prevents O-ring swelling, tearing, and leaking Reduces friction for smoother, more consistent shock performance Extends the life of seals and improves durability Easy-to-apply formula in a convenient container Trusted Factory Team product for racers and hobbyists alike Compatibility: Works with all RC shock absorbers using silicone O-rings Suitable for Team Associated vehicles and other brands Includes: (1) Container of Factory Team Green Slime Part Number: 1105 ⚡ Pro Tip: Apply a small amount of Green Slime to O-rings and seals whenever rebuilding your shocks—it’ll save you from leaks and keep your suspension feeling silky smooth longer.

Read more less

Traxxas Suspension Arms (Left & Right) – 3655Replacement Arms for Bigfoot®, 2WD Rustler®, and 2WD Stampede® Keep your suspension performing at its best with these genuine Traxxas replacement suspension arms. Designed as direct replacements for the Bigfoot®, Rustler® 2WD, and Stampede® 2WD, this set includes both the left and right arms for a quick and reliable fix. Features:• Direct replacement suspension arms• Fits Bigfoot®, Rustler® 2WD, and Stampede® 2WD• Durable molded construction built for off-road abuse• Includes both left and right arms Includes:• (1) Left Suspension Arm• (1) Right Suspension ArmPart Number: 3655 Get back on the track or trail with OEM strength and fit—built Traxxas tough.

Read more less

Traxxas 2075X High Torque Waterproof Digital Servo – Metal GearPart #: 2075X Tough. Reliable. Ready for the Trail.Upgrade or replace with confidence using the Traxxas 2075X Digital High-Torque Servo. Featuring rugged all-metal gears, ball bearings, and full waterproof protection, this servo delivers the strength and durability you need to tackle any off-road challenge. Standard equipment in the TRX-4, the 2075X is built to handle trail abuse and extreme terrain while offering smooth, precise control. Features: 125 oz-in of torque for confident steering response .17 sec/60° transit time for quick inputs Digital circuitry for enhanced performance Ball bearing supported output for smoother operation Full metal geartrain for lasting strength Waterproof – built for wet trails, mud, and snow Factory fit for most 1/10 scale Traxxas vehicles Specifications: Length: 55mm Height: 42.75mm Width: 21.5mm Torque: 125 oz-in Speed: 0.17 sec/60° Gears: Metal Motor Type: Digital Bearings: Ball Bearing Waterproof: Yes Built for the trail. Trusted in the TRX-4.Whether you're upgrading or replacing, the 2075X delivers reliable strength for every terrain.  

Read more less

Traxxas 30° Caster Blocks (2) – PART 3632 Keep your suspension strong and steering responsive with this set of 30° caster blocks from Traxxas. Whether you're replacing worn parts or dialing in your setup, these precision-molded blocks are built tough to handle the rigors of high-speed off-road action. Features: Genuine Traxxas replacement part Designed for consistent steering geometry and durability 30° caster angle for balanced handling on a variety of surfaces Includes left and right side caster blocks Upgrade with confidence—perfect for restoring performance and getting back on track fast.

Read more less

Traxxas Big Bore Aluminum Shocks (Set of 4) – Slash – Part 5862Smooth Control. Built to Soak It All Up. Upgrade your Slash suspension with Traxxas Big Bore Shocks—engineered from hard-anodized, PTFE-coated T6 aluminum and built to take a beating while delivering ultra-smooth damping. Pre-assembled with Titanium Nitride (TiN) coated shafts and springs, this complete set is a race-ready solution for both front and rear. ✅ Full set of 4 shocks – front & rear included✅ T6 aluminum shock bodies – hard-anodized and PTFE-coated for smooth travel✅ TiN-coated shafts – reduce stiction and increase durability✅ Pre-assembled with springs installed – ready to bolt on✅ Increased oil volume & heat dissipation – consistent damping on long runs✅ Perfect upgrade for Traxxas Slash and similar models 📦 Includes: (2) Front Big Bore Shocks (assembled) (2) Rear Big Bore Shocks (assembled) Springs (installed) Part #: 5862 💡 Pro Tip: Pair with shock oil tuned for your track conditions to get the most out of these premium dampers.

Read more less

Traxxas Link Wireless Module – Smart Control, Real-Time Data Unleash the full power of your Traxxas TQi radio with the Traxxas Link Wireless Module. Instantly connect your transmitter to the Traxxas Link™ app via Bluetooth and dial in your vehicle like never before. Whether you're chasing lap times or just want to geek out on data—this module turns your RC experience into something next level. Highlights:🔹 Real-time telemetry (speed, RPM, temps, voltage – with optional sensors)🔹 Live tuning on the fly – make changes while you're driving🔹 Intuitive, HD interface through the free Traxxas Link app🔹 Bluetooth wireless connection to iOS & Android🔹 Share data, log runs, or let your buddy co-drive remotely What’s In The Box: (1) Traxxas Link Wireless Module Compatible With: All Traxxas TQi Transmitters iOS 4.3+ & Android 4.4+ Optional Traxxas telemetry sensors  

Read more less

  Keep your lap timing setup clean and reliable with the EASYLAP Transponder Connect Cable, designed specifically for Kyosho Mini-Z Sport RWD chassis. This plug-and-play lead connects your EASYLAP transponder directly to the car’s board for stable timing performance without modification. ⚙️ Features: Designed for Kyosho Mini-Z Sport RWD models Direct plug-in connection — no soldering required Provides reliable power and data link to EASYLAP transponder Lightweight and compact for clean installation Ensures accurate lap counting and timing during races 📏 Specifications: Part Number: ET009-S Compatibility: Kyosho Mini-Z Sport RWD Cable Type: Transponder connection lead Use: Connects EASYLAP transponder to Mini-Z Sport receiver board 📦 Includes: (1) EASYLAP Transponder Connect Cable for Mini-Z Sport RWD 💡 Pro Tip:Pair with your EASYLAP timing transponder for seamless race lap detection on Mini-Z Sport RWD cars — a must-have for serious racers running club timing systems.

Read more less

Precision grip. Tunable feel. Pro-level quality.The PN Racing V2 Strong Tire Tape is the go-to choice for Mini-Z racers who demand consistent tire adhesion and fine-tuned steering response. Made in the USA with a higher-grade adhesive than R246 tape, this V2 version ensures a secure, long-lasting bond between your tires and rims—lap after lap. Tunable traction, your way.Strategically sized slightly narrower than the front wheels (6mm), this tape lets you fine-tune your handling balance. Mount it near the outer edge of the rim for sharper steering response, or closer to the inner edge for smoother, more controlled feel. Whether you’re dialing in for technical tracks or high-speed layouts, PN Racing gives you the flexibility to adapt your setup on the fly. ⚙️ Features V2 high-strength double-sided adhesive for Mini-Z racers Higher-grade compound vs. R246 for superior hold Narrow 6mm width allows steering feel adjustment 15-foot roll – perfect for multiple sets Ideal for front tire mounting and precise tuning Made in the USA 📏 Specifications Spec Detail Width 6mm Length 15 feet Adhesive Type Double-sided (V2 strong) Application Mini-Z Racer Front Wheels Country of Origin USA

Read more less

  The ProTek RC Aluminum Clamping Servo Horn is a precision upgrade for Team Associated B6-series vehicles, delivering increased rigidity, accuracy, and durability over the stock plastic horn. Machined from a solid block of aluminum alloy and finished in black anodizing, this servo horn is built to handle the demands of modern high-performance racing. Designed as a direct replacement for the Team Associated ASC91728 servo horn, this updated version features a 2mm taller ball stud standoff, improving steering geometry and consistency. Weighing just 2 grams, it maintains ultra-low rotating mass while adding the security of a clamping design, helping prevent slippage even if the retaining screw loosens during a run. Ideal for competitive racers looking for precise steering response and long-term reliability, this ProTek servo horn offers the perfect balance of strength, weight, and performance. Features CNC-machined aluminum construction Clamping design for secure fitment 2mm taller ball stud standoff vs previous ProTek version Direct replacement for Team Associated ASC91728 Ultra-lightweight design (only 2g) Black anodized finish Specifications Spline: 25T (Futaba / Savox / ProTek compatible) Material: Aluminum Weight: 2 grams Compatibility Team Associated B6 Series Off-Road Vehicles B6 B6.1 / B6.2 / B6.3 / B6.4 B6D variants Notes Due to manufacturer tolerances, fitment may be tight with some servo brands. Test-fit before final installation.  

Read more less

Lock in your tires with the strongest, fastest-drying RC tire glue on the market. Pro-Line Pro-Bond CA Tire Glue delivers a 3,200 PSI bond strength, giving racers absolute confidence that tires stay glued lap after lap — no lifting, no peeling, no failures. This premium formula dries crystal clear, with zero yellowing or whitening, and uses a revolutionary bottle + tip design that makes application easier, cleaner, and more consistent than any other glue you’ve used. If you mount tires, this is the glue. Features 3,200 PSI holding strength — highest in its class Super-fast curing with crystal-clear finish Custom CA formula delivers maximum rubber bond Ultra-soft round bottle for perfect squeeze control Round design stays stable on the pit table Reusable translucent yellow applicator tips Perfect applicator hole size for tire gluing Cleaner, easier, more consistent than standard CA bottles Includes (1) Pro-Line Pro-Bond Tire Glue (0.7oz / 20g) (2) Reusable Yellow Pro-Bond Applicator Tips

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

Super powerful double-sided adhesive tape

Read more less

  Traxxas Heavy Duty Front Driveshaft AssemblyPart #: 6851X Upgrade or replace with confidence using this Heavy Duty Front Driveshaft Assembly from Traxxas. Designed for the Stampede 4x4, this driveshaft is a direct-fit replacement that comes fully assembled and ready to install. Built for durability and performance, it’s compatible with both the left and right sides of the chassis. Features: Heavy-duty construction for increased durability Pre-assembled for quick, hassle-free installation Fits left or right front of the Stampede 4x4 Genuine Traxxas part for factory reliability Vehicle Compatibility: Traxxas Stampede 4x4 Includes: (1) Heavy Duty Front Driveshaft Assembly  

Read more less

Oil, shock (70 wt, 900 cSt, 60cc) (silicone)

Read more less

Team Associated RC10B7 Factory Team Carbon Rear Suspension Arms (2) – Lightweight Tuning for High-Bite Tracks! 💨 Take your RC10B7 handling to the next level with Factory Team Carbon Rear Suspension Arms. Built from AE’s proven lightweight carbon composite, these arms reduce unsprung weight and eliminate flex — giving you the precision and durability needed for high-grip conditions and competitive edge. 🔧 Key Features: ✅ Factory Team carbon composite material – ultra-light and super strong✅ Tuned stiffness for reduced flex and consistent rear traction✅ Ideal for high-bite tracks and competitive setups✅ Includes rear arm spacers for quick tuning adjustments✅ Race-proven performance, direct fit upgrade 📦 Includes: (2) Carbon Rear Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Race harder, turn sharper, and accelerate faster with precision carbon upgrades.Factory Team quality you can feel. 🔧🔥

Read more less

This is a pack of two Team Associated Hex Dish 1/10 Stadium Truck Wheels, and are intended for use with the Associated RC10T4.2 1/10 stadium truck. These wheels can also be used with the standard T4 and T4.1 when converted to 12mm hex drive. To convert your truck to use the hex drive front axles, the following parts need to be used: ASC7854 Front Axle ASC9880 Steering Block, Hex ASC4449 4-40 Aluminum Locknut ASC7856 Wheel Hex Adapters, OR ASC9892 12mm Aluminum Clamping Wheel Hex (qty 2 needed)  COMPATIBILITY: Team Associated RC10 T4Team Associated RC10 T4.1Team Associated RC10 T4.2Team Associated RC10 T4.3Team Associated RC10 T5MTeam Associated RC10 T6.1Tekno RC ET410Yokomo YZ-2 T

Read more less

Overview:Keep your 1/10 buggy clean, protected, and easy to carry with the ProTek RC 1/10 Buggy Carrier Bag — a practical, travel-friendly storage solution designed by racers, for racers. About the Buggy Carrier Bag Clean. Convenient. Compact.Whether you’re heading to the track or packing for a flight, the ProTek RC 1/10 Buggy Carrying Bag makes transport effortless. Designed to hold one complete 1/10 buggy with the body and tires attached, this durable bag keeps dirt and grime contained while protecting your car during travel. It’s compact enough to stack on top of your hauler bag, store neatly in your vehicle, or roll up when not in use. Durable Three-Ply ConstructionBuilt from a premium three-ply material, the bag combines an easy-to-clean outer and inner layer with a thin foam-padded core for extra protection. Two heavy-duty zippers secure the lid while leaving space for your buggy’s rear wing to remain exposed for easy handling. Grab the integrated side handle, the wing, or attach your own shoulder strap (not included) for versatile carrying options. Features: Fits 1/10 buggies with body and tires installed Keeps dirt, dust, and debris contained Foam-padded for added protection during transport Carry-on sized — ideal for flights and compact storage Rolls up for easy packing when not in use Durable three-ply construction for long life Convenient side handle and optional shoulder strap compatibility Specifications: Fits: 1/10 buggy w/body and tires Dimensions (W x L x H): 11.02 x 16.14 x 4.35 in (28 x 41 x 11 cm) Wing Compatibility: Yes (exposed) Shoulder Strap: Compatible (not included)

Read more less

Team Associated 6mm Heavy Duty Ballstud Set (8) – Part 91047Stronger Threads. Smoother Movement. Built for Racing. The Team Associated 6mm Heavy Duty Ballstud Set (91047) is a direct replacement for worn or damaged ballstuds on vehicles like the SC10 4x4, B5, and B5M. Designed for high-strength performance under stress, these ballstuds offer secure fitment and smooth suspension articulation. ✅ Set of 8 heavy-duty 6mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and other compatible platforms✅ Heavy-duty steel construction – improved durability in high-load areas✅ Precision fit for smooth ball cup movement✅ Ideal for camber links, steering systems, and shock mounts 📦 Includes: (8) 6mm Heavy Duty Ballstuds Part #: 91047 💡 Pro Tip: Pair with fresh ball cups for smooth, slop-free suspension movement and tighter handling.

Read more less

Upgrade your RC runtime with the Traxxas Power Cell 7-Cell 3000mAh NiMH Stick Battery Pack, designed to deliver strong performance and reliability. With its 8.4V output and Traxxas iD connector, this pack offers extra voltage and extended run time over a standard 6-cell pack — giving your vehicle more punch and playtime. ⚙️ Features: 🔌 Traxxas iD High-Current Connector simplifies charging with iD-enabled chargers 🔋 3000mAh Capacity delivers enhanced performance and longer sessions 🧵 12-Gauge MAXX Cable Wire for superior current flow and flexibility 🪙 Gold-Plated Copper Terminals reduce resistance and improve efficiency ✅ Compatible with Traxxas models that support 7-cell flat packs Pair with the Traxxas EZ-Peak iD Charger for a worry-free charging experience. Perfect for users looking for more voltage and more runtime without upgrading to LiPo.

Read more less

The Losi Mod 1 Pinion Gear lineup lets you fine-tune torque and top-speed characteristics on your 1/8-scale Losi vehicles. Precision-machined from hardened steel, these pinions deliver smooth, efficient power transfer and lasting durability under high-load brushless setups. ✅ Available 10 – 18 Tooth Options – dial-in the perfect gear ratio for any track or terrain✅ 5 mm Bore / Mod-1 Pitch – fits most 1/8-scale brushless motors✅ Hardened Steel Construction – resists wear for long-term performance Includes: (1) Mod 1 Pinion Gear (choose tooth count) (1) Set Screw (1) Allen Wrench Compatibility: Losi 1/8-scale vehicles and other models using Mod-1 gearing with 5 mm motor shafts  

Read more less

Keep your Mini-Z running strong with PN Racing’s High Power 750mAh Ni-MH AAA batteries. Built for racing, these cells deliver high voltage output over time, giving you the consistent performance needed for competitive runs. ✅ High Voltage Output – Maintains strong power throughout the run✅ Optimized Charging – Recommend charge rate: 0.7–1.0A for the best balance of power and runtime✅ Race Ready – Trusted by Mini-Z racers worldwide✅ Convenient Pack – Includes 4 matched AAA rechargeable batteries Specifications: Capacity: 750mAh Size: AAA Quantity: 4pcs Reliable, rechargeable, and race-proven — the PN Racing HP750 Ni-MH batteries are the perfect power solution for your Mini-Z.  

Read more less

Dial in your carpet setup with JConcepts Swaggers 2.2" Front Buggy Tires. These tires feature a low-profile carcass and angular ribs in multiple heights for maximum corner speed, razor-sharp tracking, and consistency on high-grip carpet or astro tracks. Designed for slim 2WD front wheels (JCO3376W or JCO3376Y), the Swagger’s pink medium-soft compound offers excellent wear while staying fast and easy to drive. 🏁 No insert required. Features:• Precision fit and finish from JConcepts• Offset angular rib design for enhanced cornering• Low-profile carcass for sharp response• Pink compound optimized for carpet and astro• No insert required

Read more less