Upgrade your TLR 22X-4 2.0 with premium strength, precision tuning, and unmistakable style. The Avid Ringer Titanium Turnbuckle Set brings billet titanium durability together with Avid’s signature Ringer design for a setup that performs as good as it looks. 💎 Titanium Strength. Race-Ready Precision. Machined from billet 6Al-4V Titanium with cold-rolled threads, these 3.5mm turnbuckles are built for serious racers who demand strength without excess weight. After a full year of testing, Avid reports zero failures — and they back them with their well-known replacement guarantee. 🔄 Built-In Directional Adjustment No more guessing trackside. Each turnbuckle features: Machined A-Arrow direction indicators (turn arrow forward to tighten) Logo engraved on all four sides (won’t wear off) Oversized 4mm adjustment center for easy wrench access Clean. Functional. Built to last. ✨ Signature Ringer Design The trademark round “Ringer” grooves reflect more light than traditional flat-cut designs, creating a bold, high-end look. The shiny black finish with bright silver rings and arrows makes these stand out on any 22X-4 2.0 build. Yes, they require extra machining steps — but for racers who want their car to literally outshine the competition, it’s worth it. ✅ Features Machined from billet 6Al-4V Titanium Cold-rolled threads for strength and durability Shiny black finish (4) Bright silver Ringer grooves (4) Machined A-Arrow direction indicators 4mm adjustment center Backed by Avid replacement guarantee 🔧 Fitment TLR 22X-4 2.0 AC TLR 22X-4 2.0 DC If you're building a clean 22X-4 2.0 and want elite durability with a premium race look — this is the turnbuckle set that delivers.  

Read more less

Keep your heli tight and responsive with the GooSky S1 Double Linkage Set. Designed as a direct replacement for the GooSky S1, these linkages ensure accurate control input and smooth flight performance. Whether you're freshening up your setup or replacing worn components after hard flying, this set keeps your S1 dialed in and ready for the next pack. ✅ Features Direct replacement for GooSky S1 Maintains precise control geometry Durable construction for reliable performance Ideal spare part for maintenance or rebuilds 📦 Includes (6) S1 Double Linkages 🔧 Compatibility GooSky S1 Helicopter Smart to keep extras in your parts bin so you’re never grounded. 🚁    

Read more less

⚠️ Notice: Expected in stock May 14th. Use the “Notify Me” option to be alerted when available. The Avid 22X Ringer Titanium Turnbuckle Set marks Avid’s first entry into the turnbuckle market — and they didn’t hold back. Featuring a deep shiny black finish with bright silver Ringer grooves and directional A-Arrows, these turnbuckles are built to stand out while delivering serious race performance. The trademark round Ringer design reflects more light than traditional flat-cut turnbuckles, giving your build a unique look that literally outshines the rest. 🔧 Built for Performance Machined from billet 6Al-4V titanium with cold-rolled threads, these 3.5mm turnbuckles are engineered for strength, precision, and long-term durability. Avid also machined their logo and directional arrows directly into the body — no laser etching to wear off over time. The bold 4mm adjustment center provides easy wrench access for fast, precise tuning at the track. 🛡 Replacement Guarantee These carry Avid’s well-known replacement guarantee if they bend or break. After over a year of testing, no failures have been reported on these 3.5mm versions. ✨ Features Machined from billet 6Al-4V titanium Cold-rolled threads for strength Shiny black finish (4) Bright silver Ringer grooves (4) Machined silver A-Arrows (directional tightening indicator) Machined logo on all four sides 4mm adjustment center for easy tuning ✅ Fits TLR 22X AC TLR 22X DC Precision. Strength. Style.Turnbuckles that perform as good as they look. 🏁

Read more less

Refresh your drivetrain and keep your 22X-T running smooth with the Essentials Bearing Kit. Designed to replace the key high-wear bearings in your truck, this kit reduces friction, improves efficiency, and restores that free-spinning feel every racer wants. Perfect for maintenance rebuilds or race-prep freshening before a big event. Includes (8) 5x10x4mm Revolution Bearings (Greased) (4) 10x15x4mm Rubber Shielded Bearings (Greased) (2) 5x13x4mm Revolution Bearings (Greased) Features Direct fit for TLR 22X-T High-performance Revolution series bearings Pre-greased for durability and longevity Rubber shielded where needed for debris protection Reduces drivetrain drag Improves smoothness and consistency Keep your 22X-T efficient, free, and race-ready with a fresh set of quality bearings. 🏁    

Read more less

Add strength and style to your Traxxas Mini Maxx® with genuine Traxxas replacement steering knuckles (steering blocks). Whether you're replacing worn parts or upgrading your look, these blocks restore precise steering geometry and keep your Mini Maxx handling like it should. Features• Genuine Traxxas replacement part• Direct bolt-on fit — no modifications required• Durable molded construction for long-lasting performance• Maintains proper steering alignment and suspension geometry• Available in multiple color options: Red Black Blue Green Gray Orange Vehicle Compatibility• Traxxas Mini Maxx® Includes• (2) Mini Maxx® Steering Blocks (color of your choice) Perfect for repairs, rebuilds, or adding a custom touch to your Mini Maxx build.  

Read more less

Keep your Traxxas Mini Maxx® running strong with these genuine replacement caster blocks. Built to factory specifications, these components restore proper suspension geometry and steering performance after wear or impact damage. Features• Genuine Traxxas replacement part• Durable molded construction for long-lasting performance• Maintains correct front suspension alignment• Direct bolt-on replacement — no modifications required• Finished in black for a clean factory look Vehicle Compatibility• Traxxas Mini Maxx® Includes• (2) Mini Maxx® Caster Blocks Perfect for routine maintenance or getting your Mini Maxx back on the track after a hard bash session.

Read more less

The Team Associated 3-Gear Gearbox Set is a genuine replacement assembly designed for the RC10B7, RC10T7, and RC10SC7 platforms. Built to factory specifications, this gearbox set ensures proper drivetrain alignment, durability, and smooth power delivery. Whether you're rebuilding after heavy track use or replacing damaged components, this 3-gear configuration maintains the performance and reliability expected from Team Associated race platforms. Features Genuine Team Associated replacement part 3-gear gearbox configuration Factory-fit for proper alignment and durability Maintains smooth and efficient power transfer Includes (1) 3-Gear Gearbox Set Compatibility Team Associated RC10B7 Team Associated RC10T7 Team Associated RC10SC7 A reliable drivetrain replacement to keep your buggy or truck performing at its best. 🏁    

Read more less

Dial in your gearing and handle serious power with the Arrma 0.8 Mod Steel 13T Pinion Gear. Precision-machined from durable steel, this pinion is built to withstand high-torque brushless setups while delivering smooth, efficient power transfer. Whether you're tuning for more acceleration or replacing a worn gear, this hardened steel 0.8 module pinion provides reliable performance for Arrma 4x4 BLX platforms. Built for strength and consistency, it’s a must-have upgrade or replacement for bashers and racers alike. Features: 13 Tooth (13T) configuration 0.8 Mod pitch Precision-machined steel construction Designed for high-power brushless systems Smooth and efficient power transfer Direct replacement or gearing upgrade Compatibility: BIGROCK BLX 4X4 – ARA102723 GRANITE BLX 4X4 – ARA102720T1 / ARA102720T2 KRATON BLX 4X4 – ARA102690 OUTCAST BLX 4X4 – ARA102692 SENTON BLX 4X4 – ARA102721T1 / ARA102721T2 TYPHON BLX 4X4 – ARA102722 GRANITE BLX 4X4 – AR102666 SENTON BLX 4X4 – AR102668 TYPHON BLX 4X4 – AR102696 Built to handle power. Tuned for performance. Ready to send it. AR310425 ARAC7876    

Read more less

  This is a replacement Traxxas Front Bulkhead. COMPATIBILITY: Traxxas HossTraxxas Slash 4x4Traxxas Stampede 4x4Traxxas Telluride 4x4

Read more less

🏁 Smooth Suspension Performance Right Out of the BoxThe Losi Mini-T 2.0 Front Shock Set Complete is a direct replacement designed to restore smooth suspension action and consistent handling. Pre-assembled for convenience, this complete front shock set makes it easy to replace worn or damaged shocks and get your Mini-T back on the track quickly. Ideal for maintenance, repairs, or keeping a spare set ready for race day. ✅ Complete front shock set, ready to install✅ Direct replacement for Losi Mini-T 2.0✅ Restores smooth suspension performance✅ Helps maintain consistent handling and control✅ Perfect for repairs and routine maintenance 📦 Includes:(Complete front shock set) 💡 Pro Tip: Check shock oil condition and spring preload after installation to fine-tune handling for your track or driving conditions.

Read more less

🏁 Add Stability & Precision to Your Mini-B SetupThe Team Losi Racing Mini-B Aluminum Rear Sway Bar Mount is an optional upgrade designed to allow installation of a rear sway bar on the TLR Mini-B platform. Constructed from durable aluminum, this mount improves rigidity and provides a solid mounting point for racers looking to fine-tune rear traction and cornering stability. Perfect for drivers wanting more consistent handling and improved performance on high-grip surfaces. ✅ Aluminum construction for added strength and durability✅ Allows installation of optional rear sway bar✅ Improves rear-end stability and handling consistency✅ Direct fit for TLR Mini-B platform✅ Ideal upgrade for racing and performance tuning 📦 Includes:(2) Aluminum camber blocksPivot insertsWashers 💡 Pro Tip: Sway bars are most effective on high-grip surfaces—start with lighter settings and adjust based on track conditions for best performance.

Read more less

🏁 Restore Precision Steering & Proper AlignmentThe Losi NASCAR Camber & Steering Link Set is a direct replacement designed to restore steering accuracy and suspension geometry on your Losi NASCAR racecar. Whether you're replacing worn components or freshening up your car for race day, this complete link set helps maintain consistent handling and reliable performance on the track. Perfect for racers looking to keep their car dialed in with factory-spec fit and performance. ✅ Direct replacement for Losi NASCAR models✅ Restores proper camber and steering geometry✅ Helps maintain precise steering response✅ Durable construction for racing conditions✅ Ideal for maintenance or rebuilds 📦 Includes:(2) Upper front camber links(2) Lower front camber links(2) Steering links(8) Hollow ball inserts(12) Mounting screws 💡 Pro Tip: After installation, re-check camber and steering alignment to ensure optimal handling and even tire wear.

Read more less

🛞 Maximum Bite for Micro-Scale Crawling Built specifically for the SCX30 platform, these INJORA 0.7" Swamp Claw tires deliver aggressive traction in a true micro footprint. The open tread and claw-style sidewalls shine on loose dirt, wet rock, and technical climbs where grip really matters. Important Fitment Note ⚠️ Designed and tested exclusively with INJORA 0.7" wheels.Fitment with other brand wheels is not guaranteed due to design and tolerance differences. Compatibility ✔ Axial SCX30 (1/30 scale)✔ INJORA 0.7" wheels Key Features • Molded in INJORA S5 Super Soft & Sticky compound• Aggressive open tread for strong bite in mud and loose terrain• Pronounced center lugs for consistent forward traction• Claw-style sidewall lugs improve grip when side-hilling• Optimized size for true 1/30 scale performance Specifications Part Number: T7019Tire Compound: INJORA S5Outer Diameter: 36mmWidth: 14mmWeight (Each): 2.8g Package Includes (4) INJORA 0.7" Swamp Claw Tires Pro Tip 💡 Pair these with brass 0.7" wheels to keep the center of gravity low and really let the S5 compound do its thing on steep or slippery lines.    

Read more less

⚙️ Precision Steering Upgrade with Added Front-End Weight These INJORA brass steering links are a direct replacement upgrade for the 1/30 Axial SCX30, adding durability and a touch of front-end weight where it actually helps. The black-coated brass finish keeps things looking clean while improving stability on climbs. Compatibility ✔ Axial SCX30 (1/30 scale) No modifications required — true drop-in fit. Key Benefits • CNC-machined brass for strength, accuracy, and corrosion resistance• Adds weight to the front axle for improved climbing stability• Helps keep the front planted for better steering control• Direct replacement for stock steering links• Black-coated finish for a subtle, premium look Specifications Part Number: SCX30-05BKMaterial: BrassFinish: Black CoatedTotal Weight: 2.8g What’s Included (2) Brass Steering Links(1) Torx Screwdriver Pro Tip 🧠 Small weight changes matter on 1/30 scale rigs — adding brass up front can noticeably improve tire bite and control on steep or technical climbs without overloading the chassis.

Read more less

🪢 Scale Rescue & Towing Strap for Micro Crawlers Be prepared for any trail recovery with the INJORA 270mm Elastic Strap Rescue Rope. Designed for 1/18 and 1/24 scale RC crawlers, this durable elastic rope with metal hooks lets you tow, rescue, or secure your truck with ease. ⚠️ Note:Slight size variation may occur due to handmade construction. Thanks for your understanding. ⚡ Features: 🧵 Elastic 2-in-1 rope design for stronger tension🔗 Includes metal hooks for easy attachment to your truck🏁 Versatile use: body fixing, towing, or scale recovery 📏 Specifications: Color Options: Black, Red, Orange, Blue, GreenLength: Approx. 270mm (10.63in)Weight: 6g (0.21oz) 📦 Package Includes: (1) RC Car Rescue Rope 🔧 Compatibility: 1/24 & 1/18 Scale RC CrawlersWorks with: TRX-4M, SCX24, FCX24, and similar platforms 💡 Pro Tip:Perfect for scale recovery setups—use multiple straps for towing heavier builds or linking trailers for your mini crawler adventures.

Read more less

  This is a replacement set of two Traxxas Maxx Wheel Hexes, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Includes: (2) Wheel hex (2) 2.5x12 pins COMPATIBILITY: Traxxas Maxx

Read more less

Give your short course truck championship-proven traction and aggressive scale styling with the Traxxas BFGoodrich Mud-Terrain T/A Front Tires. Fully licensed and TORC-series tested, these tires feature an authentic tread pattern and white sidewall lettering for a true off-road racing look. Mounted on durable split-spoke SCT wheels with a chrome center and molded beadlock detail, this setup doesn’t just perform—it turns heads. The S1 soft compound provides exceptional front-end grip and precise steering response, making it an excellent upgrade for improving control on your 2WD Slash. ✅ Key Features: Officially licensed BFGoodrich Mud-Terrain T/A tires Race-proven performance inspired by TORC competition S1 soft compound for maximum steering precision and front grip Realistic white sidewall lettering Split-spoke SCT wheels with satin chrome centers Molded beadlock-style detail for long-lasting scale appearance 12mm hex with factory front-wheel offset Fully compatible with factory and aftermarket 2.2/3.0 SCT tires 📦 Includes: (2) Pre-mounted BFGoodrich Mud-Terrain T/A Front Tires (2) Split-Spoke SCT Front Wheels (Satin Chrome) 🔧 Specifications: Wheel Position: Front Wheel Size: 2.2/3.0 Short Course Hex Size: 12mm Compound: S1 Soft Wheel Finish: Satin Chrome Tire Mounted: Yes ✅ Compatibility: Traxxas Nitro Slash Traxxas Slash 2WD Traxxas Telluride 4X4 Upgrade your truck with premium scale looks and race-ready handling—perfect for drivers who want sharper steering, increased confidence, and standout style on any terrain.

Read more less

Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

The Avid Triad Direct Drive for the Team Associated B7 is designed for stock racers looking to eliminate the slipper clutch and reduce rotating mass for maximum drivetrain efficiency. By removing the entire clutch assembly, you get direct power transfer with zero slip (other than the differential), resulting in sharper throttle response and a more connected feel on high-grip tracks. Weighing just 6.45g with a 72T spur installed (2.62g without spur), this is one of the lightest direct drive systems available. 🔥 Why Run Direct Drive? Some stock racers prefer direct drive for: Reduced rotating mass Immediate throttle response Consistent power delivery Simplified drivetrain setup It’s not for every track or driver, but in the right conditions it can offer a competitive edge. ⚙️ Features Eliminates full slipper clutch assembly Ultra-lightweight design (6.45g w/ 72T spur) All-aluminum construction Custom M3x48 aluminum topshaft screw Clean, secure install Easy conversion back to slipper setup No loose slipper screws to maintain Works with Avid Triad spur gears 📦 Includes (1) Direct Drive Aluminum Plate (1) 69T Triad Spur (1) 72T Triad Spur (1) M3x48 Aluminum Screw (1) Aluminum Hat Bushing (1) Aluminum Cone Washer (1) M3 Ringer Aluminum Nut Note: Works with Avid Triad spur gears (spur not included unless specified in package). 🛠 Installation Use B6.1 Triad Direct Drive assembly instructions (installation is the same for the B7). ✅ Compatibility Team Associated B7 For racers chasing maximum efficiency and minimal rotating mass, the Triad Direct Drive keeps things light, simple, and race-focused. 🏁  

Read more less

Restore smooth, consistent shock performance with the Team Losi Racing G3 TiNi Shock Shaft, designed for precision damping and long-lasting durability. Featuring a 3mm diameter and 48.7mm length, this shaft uses a TiNi coating to reduce friction and wear for smoother shock action and extended service life. Ideal for rebuilds or routine maintenance, this shock shaft helps maintain consistent suspension performance under demanding race conditions. Features: G3 TiNi-coated shock shaft 3mm diameter x 48.7mm length Reduced friction for smoother shock operation Increased wear resistance and durability Precision-machined for consistent performance Includes: (1) Shock Shaft Part Number: TLR-1129

Read more less

Maintain proper shock mounting geometry and smooth suspension movement with the Team Losi Racing Shock Standoff Arm Set. Designed specifically for the TLR 22X platform, these standoffs mount at the suspension arms and provide a precise, secure attachment point for the shocks. Ideal for replacement during maintenance or rebuilds, these components help ensure consistent suspension performance and reliable fit on race day. Features: Precision-fit shock standoffs for suspension arms Maintains correct shock mounting geometry Durable construction for racing use Direct replacement components Compatibility: Team Losi Racing 22X Includes: (2) Shock Standoffs (Arm) Part Number: TLR-1179  

Read more less

Eliminate slop and sharpen steering precision with the Hot Racing Aluminum Tight-Tolerance Steering Link Set for the Axial SCX30. Precision-engineered to significantly tighter tolerances than stock links, this upgrade delivers crisper response, better control, and consistent steering feel—especially noticeable in technical crawling. Machined from 6061-T6 aluminum and finished in silver anodizing, the links pair strength with corrosion resistance. Hardened steel pivot balls provide durable, low-friction articulation for smooth, reliable movement under load. Features & Benefits: Precision-engineered tight-tolerance linkage set Reduces steering slop and improves response CNC-machined 6061-T6 aluminum links Silver anodized finish for durability and corrosion resistance Hardened steel pivot balls for smooth, long-lasting articulation High strength-to-weight ratio for performance crawling Compatibility: Axial SCX30 (1/30 scale) Includes: Aluminum steering link set with hardened steel pivot balls A must-have steering upgrade for SCX30 drivers looking for accuracy, consistency, and confidence on the rocks.      

Read more less

Refresh your build with the Hot Racing Steel Hardware Set for the Axial SCX30. This complete replacement kit swaps the factory hardware for durable steel fasteners, improving strength, reliability, and long-term durability—especially important for hard crawling and frequent maintenance. Features & Benefits: Full steel hardware set for added strength Direct replacement for factory screws Improves durability and resistance to stripping Ideal for rebuilds, upgrades, or maintenance refreshes Compatibility: Axial SCX30 (1/30 scale) Includes: Complete steel hardware set for Axial SCX30 A simple, practical upgrade to keep your SCX30 tight, reliable, and trail-ready.  

Read more less

Refine front-end suspension performance with the Vision Racing (VR) -2mm Carbon Front Shock Tower V2 for the TLR 22X. Precision-cut from 4mm carbon fiber, this tower lowers the front shock mounting position by 2mm to help fine-tune handling, steering response, and overall consistency on high-grip or technical tracks. Designed to accept the stock front tower guard, the V2 version adds micro-tune shock positioning for precise setup adjustments. Additional webbing increases rigidity and strength, while the chamfered edges provide durability and a clean, professional finish. Features & Benefits: -2mm front shock height for optimized suspension geometry 4mm carbon fiber construction for strength and stiffness Accepts stock front tower guard Micro-tune shock positioning for precise setup changes Added webbing for extra strength Chamfered edges for durability and a premium look Compatibility: TLR 22X Includes: (1) Vision Racing TLR 22X -2mm Carbon Front Shock Tower V2 (4mm) A precision performance upgrade for racers looking to sharpen front-end feel and dialing capability on the TLR 22X platform.    

Read more less

Add scale realism and dependable traction with the 1.4" Gray Wheels mounted with licensed BFGoodrich® Mud-Terrain™ T/A® KM3 tires. Designed with authentic details and ready to install, this set delivers a balanced blend of grip, durability, and multi-terrain performance. The medium-compound rubber provides excellent traction while maintaining tread life, and the tires feature raised sidewall lettering with an authentic beadlock-style look. Pre-mounted on dual-profile gray wheels, they’re perfect for quick swaps and hassle-free installation. Features & Benefits: Licensed BFGoodrich® Mud-Terrain™ T/A® KM3 tires Authentic beadlock-style appearance with raised sidewall lettering Medium-compound rubber for grip, durability, and all-terrain traction Pre-mounted on 1.4" dual-profile gray wheels Quick, easy installation—no gluing required Compatibility: Replacement wheels/tires for Mini Slash 4X4 Model #: 108164-1 Includes: (2) 1.4" Gray Wheels with BFGoodrich® Mud-Terrain™ Tires (mounted) A great replacement or upgrade to keep your Mini Slash 4X4 looking sharp and performing strong across a variety of surfaces.  

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

Replace or upgrade your rear suspension with this Team Associated carbon fiber rear shock tower, designed specifically for the RC10T7 platform. Made from lightweight, rigid carbon fiber, this shock tower provides precise shock mounting and consistent suspension geometry for racing or bashing. Features: Lightweight carbon fiber construction High rigidity for consistent suspension performance Precision fit for the RC10T7 platform Direct replacement for the stock rear shock tower Includes: (1) RC10T7 Rear Shock Tower Compatibility: Team Associated RC10T7 Team Associated RC10SC7 Part Number: 71208 Ideal for racers looking to maintain factory geometry or replace a damaged rear shock tower with a genuine Team Associated part.  

Read more less

  Light up your rig with the Traxxas LED Light Kit with High-Voltage Controller, designed for powerful, stable illumination on high-voltage setups. This optional kit includes a high-voltage amplifier that powers both high-output light bars and delivers regulated, flicker-free performance, even as battery voltage drops. Features: High-voltage LED controller included Compatible with Velineon® VXL-8s ESC Fully functioning brake lights Low and high beam brightness settings Fully waterproof design Stable lighting with no flickering or dimming Package Includes: LED light kit High-voltage LED light controller Installation hardware Compatibility: Traxxas MAXX® Traxxas X-Maxx® Traxxas XRT® Part Number: 7885 Perfect for night running, trail driving, or adding scale realism and visibility to your high-power Traxxas truck.

Read more less

Upgrade front-end durability with this Powerhobby aluminum front gear box. CNC-machined from aluminum and anodized for a clean finish, it’s a direct replacement for the stock unit and helps reduce flex under load. Features: CNC-machined aluminum construction Increased strength and rigidity over stock plastic Precision fit for reliable drivetrain performance Available in Black, Red, or Blue anodized finishes Direct replacement design Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6565    

Read more less

Keep the front end down and the fun under control with this factory-assembled Traxxas wheelie bar. Designed to bolt on easily, it helps improve stability during hard launches while protecting the rear of your truck from repeated impacts. Key Features Genuine Traxxas replacement part Fully assembled and ready to install Durable black finish Helps control wheelies and protect rear components Clean, factory-style fit Compatibility 1/8 Traxxas Sledge 4WD Brushless Monster Truck Perfect for high-power setups where throttle meets traction and things want to get rowdy 🏁  

Read more less

The Kyosho Mini-Z MR-04 EVO2 MM2 Motor Case Set is a genuine replacement part designed specifically for the Mini-Z MR-04 EVO2 platform. This motor case set ensures proper motor alignment and secure mounting, helping maintain consistent drivetrain performance and reliability during racing or regular use. Ideal for repairs, rebuilds, or routine maintenance, this factory Kyosho component delivers precise fitment and durability you can trust for competitive Mini-Z racing. Features Genuine Kyosho replacement part Precision-molded for accurate motor alignment Restores proper drivetrain function Designed for long-term durability Compatibility Kyosho Mini-Z MR-04 EVO2 (MM2 configuration) Includes (1) Kyosho Mini-Z MR-04 EVO2 Motor Case Set 📦 Includes (3) Soft Rear Suspension Plates 🔧 Compatibility Kyosho Mini-Z MR-03(MM, LM, and MM2 configuration)    

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Add eye-catching scale lighting and custom glow effects to your RC build with the INJORA Flexible Cuttable LED Strip Lights.These ultra-thin, bendable LED strips are designed specifically for RC bodies, allowing you to wrap contours, outline body lines, or create dramatic illumination on 1/10, 1/18, 1/24, and other custom projects. Choose from six vibrant colors and cut the strip to your desired length for a perfect fit on any body shell. Note: For lighting modes such as steady, breathing, and strobe, an additional light controller is required.Do NOT pull or stretch the strip during installation. ⭐ Features Available in six colors: Warm White, Red, Ice Blue, Pinkish Purple, Green, Dark Blue Ultra-flexible design wraps easily around curved surfaces Cuttable strip lets you customize the exact length you need Bright illumination for night crawling, racing, or scale realism Easy installation with included cable ties (glue can be used if preferred) Perfect for RC crawlers, bashers, drifters, and custom scale builds 📐 LED Strip Specifications Part Number: L42 Operating Voltage: 5–7.4V Total Wire Length: 550mm LED Strip Length: 290mm LED Strip Width: 2mm Available Colors: Warm White Red Ice Blue Pinkish Purple Green Dark Blue Weight: 6g 🔌 Optional Light Controller (Sold Separately) Lighting Modes: Steady • Breathing • Strobe Control Methods: Manual button CH3 on transmitter Length: ~175mm (6.89") Weight: 3.2g 📦 Includes (1) Flexible LED Strip Light Cable ties for wire management  

Read more less

The Hot Racing HRASLF254T is a lightweight aluminum 32-pitch (0.8 module) spur gear designed for Traxxas 1/10 vehicles equipped with slipper clutch transmissions. CNC machined from durable 6061-T6 aluminum and hard anodized in a gunmetal finish, this spur gear provides smooth, consistent power delivery while reducing rotating mass compared to steel options. Ideal for racers and bashers looking to fine-tune drivetrain response without sacrificing fitment or reliability. 🔧 Features CNC-machined 6061-T6 aluminum construction Hard anodized gunmetal finish for durability Lightweight design reduces rotating mass Direct-fit replacement for slipper clutch transmissions 0.8 module pitch (compatible with 32-pitch gearing) 📐 Specifications Number of Teeth: 54 Gear Pitch: 0.8 module (32 pitch compatible) Material: 6061-T6 Aluminum 📦 Includes 54T Aluminum 0.8 Mod Spur Gear ⚠️ Requirements & Notes Designed for vehicles equipped with a slipper clutch transmission Not compatible with center gear differential ✅ Compatibility Traxxas Jato 3.3 Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4 Traxxas T-Maxx 3.3

Read more less

The Hot Racing HRASJT254 is a hardened steel 32-pitch spur gear designed for demanding 1/10 Traxxas applications. CNC machined from hardened steel and lightened for reduced rotating mass, this 54-tooth spur gear offers exceptional durability and consistent performance under high-power setups. Ideal for drivers looking to replace worn plastic spur gears or upgrade for improved reliability, this spur gear is built to handle aggressive driving while maintaining precise gear mesh. 🔧 Features CNC-machined, lightened hardened steel construction Black oxide coating for corrosion resistance and long service life Includes silver-colored countersunk washers for secure mounting Designed for 32 pitch (0.8 module) gearing setups 📐 Specifications Number of Teeth: 54 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face Width: 6mm (0.24 in) Internal Diameter: ~11mm (~0.43 in) 📦 Includes 54T 32-Pitch Steel Spur Gear (3) Mounting Screws (3) Silver Countersunk Washers (3) Shims (use as needed to prevent screw protrusion through spur mounting plate) ⚠️ Requirements & Notes Requires hardened clutch bell or pinion gear Requires slipper transmission Will NOT work with vehicles equipped with a center gear differential For center-diff vehicles, use Hot Racing SSLF2-series spur gears instead ✅ Compatibility Traxxas E-Revo (1/10) Traxxas Jato 3.3 Traxxas T-Maxx 3.3 Traxxas T-Maxx 2.5R Traxxas Summit (1/10) Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4

Read more less