Add Weight. Add Traction. Add Control. Upgrade your TRX-4M for superior crawling performance with the Traxxas Brass Differential Covers. Precision-machined from solid brass, these optional covers add low-mounted weight directly over the axles — improving stability, traction, and balance on steep climbs and technical trails. Trail-Tested Brass Performance These brass differential covers replace the stock composite versions, providing enhanced durability and a lower center of gravity without altering your crawler’s geometry. The added weight helps keep your tires planted and your truck steady, making this a must-have upgrade for any serious TRX-4M crawler. Features: Machined brass construction adds valuable weight low on the chassis Improves traction, stability, and climbing performance Direct-fit design — simple installation, no modifications needed Durable finish resists corrosion and wear Genuine Traxxas factory upgrade part Includes: (2) Brass Differential Covers (8) 1.6×12 mm Button Head Screws Compatibility: Traxxas TRX-4M Traxxas TRX-4MT Traxxas Tough — Brass-Built for Better Crawling.

Read more less

  Add Weight Down Low. Conquer More Terrain. Enhance your TRX-4M’s crawling capability with the Traxxas Brass Lower Shock Spring Retainers. These precision-machined brass retainers replace the stock plastic pieces, adding valuable low-mounted weight to improve traction, stability, and climbing performance on steep and uneven terrain. Performance Upgrade for Serious Crawlers By lowering the vehicle’s center of gravity, these brass retainers help your TRX-4M stay planted and composed while tackling technical trails. Designed for a direct factory fit, they install easily and deliver immediate performance gains — a must-have upgrade for any dedicated rock crawler. Features: Machined brass construction adds low-mounted weight Improves crawling stability and reduces rollovers Enhances traction on steep and uneven surfaces Direct fit upgrade — no modifications needed Durable finish for long-lasting performance Genuine Traxxas factory brass option part Includes: (4) Brass Lower Shock Spring Retainers Compatibility: Traxxas TRX-4M Traxxas TRX-4MT Traxxas Tough — Brass Power for Better Crawling.

Read more less

  Add Weight. Increase Control. Boost your TRX-4M’s steering precision and front-end traction with the Traxxas Brass Steering Blocks. Each block adds 7 grams of low-mounted brass weight, improving stability, balance, and climbing performance on technical terrain. Designed for the TRX-4M Ford Bronco and Defender, these are a must-have upgrade for serious crawlers. Performance You Can Feel Machined from high-quality brass, these steering blocks replace the stock composite parts to lower the truck’s center of gravity and improve tire contact on uneven terrain. The added weight helps your crawler stay planted on steep inclines and rock obstacles — delivering smoother steering and superior control. Features: Precision-machined brass construction adds 7 g per side Lowers center of gravity for better crawling performance Enhances steering traction and stability Includes mounting hardware with threadlock for a secure install Direct factory fit with no modifications required Genuine Traxxas factory upgrade Includes: (1) Left Brass Steering Block (7 g) (1) Right Brass Steering Block (7 g) (2) 2.5×12 mm BCS (with threadlock) (4) 2×6 mm SS Screws (with threadlock) Compatibility: Traxxas TRX-4M Ford Bronco (Model #97074-1) Traxxas TRX-4M Defender (Model #97054-1) Traxxas Tough — Add Brass. Gain Control.

Read more less

Tough Looks. Real Protection. Keep your TRX-4M Ford Bronco looking sharp and performing strong with the Traxxas Front & Rear Bumper Set. These genuine factory replacement bumpers provide the perfect blend of scale realism and trail-ready durability, giving your mini crawler the protection it needs for serious off-road adventure. Trail-Tested Design Crafted from high-strength composite material, these bumpers are designed to absorb impacts and protect vital components without adding unnecessary weight. With authentic Bronco styling, they maintain the truck’s rugged good looks while standing up to tough trail conditions. Features: Durable composite construction for long-lasting performance Includes both front and rear bumpers Authentic scale Bronco styling Direct factory fit — easy installation, no modifications needed Genuine Traxxas factory replacement parts Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Traxxas TRX-4M Ford Bronco (Model #97074-1) Traxxas Tough — Built Bronco Strong.

Read more less

Overview:Upgrade your TC8’s precision and performance with the 1UP Racing Aluminum DirectHex Hub Axles — the ultimate solution for racers who demand accuracy, strength, and zero slop in every corner. About the Aluminum DirectHex Hub AxlesExpertly CNC-machined from high-grade 7075 aluminum, these DirectHex axles feature a true hex interface that completely eliminates the play and inconsistency of clamping-style hubs. The lightweight design reduces rotating mass, while the durable black anodized finish and laser-etched markings give a clean, professional look. Each set includes premium 6x10x3 Cv2 Pro bearings and o-rings for smooth operation and reliable fitment. Features: True hex interface — zero slop, no clamping distortion Precision-machined from 7075-T6 aluminum for strength and low weight Black anodized finish with laser-etched 1UP logo and hex size Includes premium 6x10x3 Cv2 Pro bearings Available in 4 mm, 5 mm, and 6 mm offsets for fine-tuned handling Four o-rings included for secure, consistent installation Race-proven design for the Team Associated TC8 platform Includes: (2) Team Associated TC8 Aluminum DirectHex Hub Axles (5 mm Offset)

Read more less

  This is a pack of four replacement Traxxas 4-Tec 2.0 Shock Caps. These caps feature installed eyelets. COMPATIBILITY: Traxxas 4-Tec 2.0 Traxxas Hoss Traxxas Rustler 4x4

Read more less

⚙️ Precision Aluminum Spur Gear Upgrade for Traxxas 2WDTake your Traxxas performance to the next level with the Hot Racing 48 Pitch Hard Anodized Aluminum Spur Gear (90T). Designed for speed enthusiasts and precision builders, this CNC-machined aluminum gear provides smoother power transfer, reduced flex, and improved efficiency compared to the stock nylon spur gear. 🔩 About the Spur Gear Crafted from 6061-T6 aluminum, this gear is hard-anodized in a sleek light gunmetal finish for enhanced strength and wear resistance. The included silver anodized countersunk washers and high-strength hardware ensure a secure and professional-grade installation. Perfect for high-RPM setups and consistent gear mesh, this upgrade provides durability without sacrificing performance. 🌟 Features CNC-machined 6061-T6 aluminum for high precision and strength Hard-anodized gunmetal finish resists corrosion and wear Direct replacement for the stock nylon spur gear Silver anodized washers and mounting hardware included 48 pitch gearing with a 90-tooth configuration Ideal for smooth, efficient, high-speed performance 📏 Specifications Pitch: 48P Tooth Count: 90T Mounting Holes: 3 Tooth Face Width: ~5mm 📦 Includes (1) 48 Pitch Aluminum Spur Gear (90T) (3) Mounting Screws (3) Silver Anodized Countersunk Washers (3) Flat Washers (for optional spacing) ⚠️ Notes Aluminum gears prioritize speed and precision over maximum durability. Do not overtighten the slipper clutch — excessive tension may cause gear failure. Recommended motor temps: below 160°F, ESC below 160°F. For added motor security, use Hot Racing HRATE18L06 motor lock plate. Always check gear alignment before running. 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD 🏁 Built for precision, performance, and durability — the Hot Racing 90T aluminum spur gear keeps your Traxxas running smooth, fast, and reliable.

Read more less

Take your Losi NASCAR® 1/12 on-road performance to the next level with the Pro-Line Fifty6 Pre-Mounted Foam Tires. Engineered for ultimate traction and stability on carpet racing surfaces, these race-proven tires deliver maximum grip, precision handling, and superior consistency lap after lap. ✅ Track-Ready Performance – Designed for maximum grip and cornering stability on carpet✅ Lightweight & Efficient – Reduces rotational mass for faster acceleration and smoother handling✅ Durable Foam Compound – Provides long-lasting consistency and predictable performance✅ Sleek Black Circuit Wheels – Pre-mounted and balanced for immediate race use✅ 8mm Hex Fitment – Ensures precise installation and compatibility with Losi NASCAR platforms Includes: (4) Losi® NASCAR® Fifty6 1/12 Pre-Mounted Foam Tires (Black) Specifications: Scale: 1/12 Diameter: 2.14 in (54.3 mm) Width: 1.05 in (26.6 mm) Hex Size: 8 mm ⚡ Pre-glued, pre-mounted, and precision-tuned — the Pro-Line Fifty6 tires are ready to dominate your next carpet race right out of the box.  

Read more less

Upgrade your driveline with the Losi NASCAR® Mod 0.5 Delrin Spur Gear (59T) — a lightweight, precision-milled gear designed for smooth power transfer and reduced rotating mass. This spur gear offers a direct bolt-on fit to replace the stock metal version, improving efficiency and throttle response. ✅ Lightweight Delrin Construction – Reduces drivetrain drag and improves acceleration✅ Precision Machined – Ensures perfect gear mesh and smooth operation✅ Direct Factory Fit – Installs easily with no additional parts required✅ Durable & Quiet – Maintains strength while reducing noise compared to metal Includes: (1) 59T Delrin Spur Gear ⚡ Cut weight, gain speed, and stay race-ready with Losi’s high-performance Delrin spur gear upgrade.  

Read more less

Upgrade your steering precision and durability with the Losi NASCAR Aluminum Bell Crank Set. Machined from strong, lightweight aluminum, this precision-engineered set eliminates slop from the factory steering system while maintaining consistent steering angles and control — even under high-impact racing conditions. ✅ Precision Aluminum Construction – Adds strength and eliminates flex for more accurate steering✅ Direct Factory Upgrade – Installs easily using existing hardware✅ Improved Durability – Designed to absorb impacts and maintain alignment✅ Gunmetal Finish – Sleek, race-ready look Includes: (1) Aluminum Bell Crank Set (6) Sleeves ⚡ Take control of every turn — upgrade to the Losi Aluminum Bell Crank for smoother, more consistent steering performance.

Read more less

Upgrade your driveline strength with the Traxxas Heavy Duty Front Stub Axle Set. Built from tough, high-quality materials, these stub axles are designed to handle the power, torque, and abuse of extreme off-road action. Perfect as a direct replacement or durability upgrade, they keep your 4X4 running smooth and reliable through every bash and race. ✅ Heavy-Duty Design – Reinforced construction for extreme durability✅ Direct Replacement – Genuine Traxxas fit and finish✅ Ready for Action – Built to handle jumps, rough terrain, and high-power systems Compatibility: Traxxas Rally Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4 Includes: (2) Heavy Duty Front Stub Axles ⚡ Stronger, tougher, and race-ready — the Traxxas HD Stub Axles keep your 4X4 rolling no matter the terrain.

Read more less

Upgrade your 2WD Traxxas ride with the HD Cold Weather Front Suspension Arm Set. Built from Traxxas’ proprietary heavy-duty composite, these arms are engineered to handle extreme loads, big landings, and cold weather conditions without breaking. Perfect for bashing, racing, or speed runs, they deliver maximum durability with the right amount of flex. ✅ Heavy-Duty Composite – Designed to handle high loads and resist breakage✅ Cold Weather Ready – Maintains strength and flexibility even in low temps✅ Direct Fit Replacement – Easy install with factory precision✅ Extreme Durability – Built for jumps, landings, and high-performance driving Compatibility: Traxxas Slash 2WD Traxxas Stampede 2WD Traxxas Rustler 2WD Includes: (2) HD Cold Weather Front Suspension Arms (Black) ⚡ Send it higher, land it harder — these HD arms are ready for anything.  

Read more less

Keep your 1/8 scale buggy or truggy running strong with the Team Associated 46 Tooth Mod 1 Spur Gear. This genuine replacement gear is the same one included in the RC8B3.1e kit and delivers reliable, consistent performance for high-power electric setups. 🔥 Key Features: 46T Mod 1 spur gear (stock replacement part) Precision molded for smooth, efficient power transfer Durable construction built for high-torque applications Genuine Team Associated factory part for perfect fit ✅ Compatibility: Team Associated RC8B3.1e Team Associated RC8B3.2e Team Associated RC8B4.1e Team Associated RC8B4e Team Associated RC8T3.1e Team Associated RC8T4e 📦 Includes: (1) 46T Mod 1 Spur Gear ⚠️ Tip:Check your center diff fluid and bearings during installation for maximum drivetrain efficiency and longevity.

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

Customize and protect your buggy with the LC Racing L5074 BHC-1 Clear Body (Long Wheelbase). This lightweight polycarbonate shell comes unpainted, allowing you to design your own unique paint scheme while giving your BHC-1 the fresh look it deserves. ⚡ LWB (Long Wheelbase) Design – Built specifically for use with the L5073 2.0mm Aluminum LWB Chassis and side guard extensions⚡ Clear Polycarbonate – Ready to paint and personalize⚡ Durable Construction – Withstands racing impacts and bashing abuse⚡ Direct OEM Replacement – Perfect fit for your LC Racing buggy Includes: (1) BHC-1 Clear LWB Body Compatibility: LC Racing BHC-1 (requires L5073 LWB chassis and side guard extensions) Part #: L5074  

Read more less

The LC Racing L5008 Front Hinge Pin Brace, Bulkhead & Bumper Set is a genuine replacement parts kit for your BHC-1. Designed for durability and precision, this set restores strength and alignment to your front suspension while protecting your chassis with a tough bumper. ✅ Complete Replacement Set – Includes hinge pin brace, bulkhead, and bumper✅ Durable Construction – Built to handle the demands of high-performance 1/14 scale racing✅ Direct OEM Replacement – Perfect fit for the LC Racing BHC-1 Includes: (1) Front Hinge Pin Brace (1) Front Bulkhead (1) Front Bumper Compatibility: LC Racing BHC-1 Part #: L5008

Read more less

Keep your X-Maxx suspension performing like new with the Traxxas GTX Shock Shaft Set. At 110mm long, these precision-ground shafts are built from hardened steel to withstand extreme bashing and big landings, delivering smooth and consistent shock action. ✅ Hardened Steel Construction – Maximum durability for extreme use✅ Precision Ground Shafts – Ensures smooth shock absorber performance✅ Direct OEM Replacement – Genuine Traxxas part for a perfect fit✅ Pair Pack – Includes two shafts for easy servicing Includes: (2) 110mm GTX Shock Shafts – Part #7763 Compatibility: Traxxas X-Maxx (with GTX shocks) Check your manual for exact fitment Part #: 7763  

Read more less

Upgrade your drivetrain with the Traxxas Rear HD Driveshaft Assembly, built tough with a 6mm axle for maximum durability. Designed for use on the Hoss 4x4, Rustler 4x4, and Slash 4x4, this assembly is required when your vehicle is equipped with the Traxxas Extreme Heavy Duty Suspension Upgrade Kit (TRA9080X). ✅ Heavy-Duty Strength – Built to handle extreme torque and off-road abuse✅ Direct Replacement – OEM fit for Hoss 4x4, Rustler 4x4, and Slash 4x4✅ Complete Assembly – Comes pre-assembled with axle and hardware for quick install✅ For HD Suspension Models – Compatible only with vehicles using the TRA9080X Extreme Heavy Duty Suspension Kit Includes: (1) Rear HD Driveshaft Assembly w/ 6mm axle Required hardware Compatibility: Traxxas Hoss 4x4 (with TRA9080X kit) Traxxas Rustler 4x4 (with TRA9080X kit) Traxxas Slash 4x4 (with TRA9080X kit) Take your 4x4’s durability to the next level with the Traxxas 9052 Rear HD Driveshaft Assembly — built for serious bashing and racing.

Read more less

Take your Mini-Z performance to the next level with PN Racing’s Machine Cut 5H Delrin Wheels. Designed for strength and ultra-lightweight performance, these precision-cut wheels are built for racers who want maximum efficiency and handling. ✅ Ultra Lightweight – Just 0.8g (Front) and 0.9g (Rear) for reduced rotating mass✅ Strong Cut Design – Reinforced 5H structure provides durability without extra weight✅ Delrin Construction – Tough, smooth-running material for consistent performance✅ Versatile Options – Available in multiple offsets for perfect tuning Available Sizes: Front: F0, F3 Rear: R0, R1 Pan Car: 14.5mm width Color: White Lightweight, durable, and precision cut — PN Racing’s 5H Delrin Wheels deliver smoother handling and faster response for serious Mini-Z racers.

Read more less

Unlock serious power in your 1/28 scale racer with the PN Racing Anima V4 30A ESC. Built ultra-small, ultra-light, and competition-ready, this sensored brushless ESC delivers massive output in a tiny package with CNC metal housing for excellent heat dissipation. ✅ Tiny Size, Big Power – Designed specifically for 1/27–1/28 scale cars✅ 30A Continuous / 80A Peak – Handles even the hottest setups with ease✅ Ultra Lightweight – Only 7.1g (without wires) to keep your car nimble✅ CNC Aluminum Housing – Superior cooling and durability✅ Fully Adjustable – Multiple programmable parameters for fine-tuned performance Specifications: Input Voltage: 2S LiPo (6.0V–8.4V) BEC: 6V/7.4V 3A Continuous Current: 30A Peak Current: 80A Motor Size Limit: 1525 / 1626 Motor Maximum: 10,000Kv (0° timing) Size: 19.5 × 13.7 × 11.0mm (excluding plug) Weight: 7.1g (without wires) Package Includes: (1) Anima V4 30A ESC (1) 80mm Motor Sensor Wire (PN Anima Motors #500822) (1) 100mm Motor Sensor Wire (PN Anima Motors #50085) (1) 125mm Motor Sensor Wire (Atomic / Hobbywing / MWX motors) (1) Wire Connector (ESC to Receiver #500826) (1) JST2.0 Female Plug to 2S LiPo Battery Adapter Compact, powerful, and built for racers — the PN Racing Anima V4 ESC is the ultimate upgrade for serious Mini-Z competitors.  

Read more less

Bring authentic scale detail and race-ready performance to your Losi NASCAR with this officially licensed Goodyear Eagle Wet Tire set. Pre-mounted on gray wheels, these tires deliver the grip and style you need to look fast and stay hooked up on track. Officially licensed Goodyear Eagle wet tire design Pre-mounted on durable gray wheels — ready to install Fits front and rear of 1/12 Losi NASCAR models High-traction rubber compound for consistent performance Pack includes 4 mounted tires (full set) Upgrade your NASCAR with the PRO1028310 Goodyear Eagle Wet Tire Set and hit the track with pro-level style and grip.  

Read more less

Keep your RC10T6.2 drivetrain running smooth with these 92.5mm Rear CVA Bones. Built to handle the demands of competitive racing, these precision components deliver efficient power transfer and long-lasting durability on high-performance stadium trucks. 🔥 Key Features: Designed specifically for the RC10T6.2 rear CVA drivetrain 92.5mm length for proper fit and rear suspension geometry Durable steel construction for high-strength performance Factory Team-grade reliability and consistency Ideal for replacing worn or damaged CVA bones ✅ Compatibility: RC10T6.2 May fit other Team Associated vehicles using 92.5mm CVA bone setups—check manual for fitment 📦 Includes: (2) Rear CVA Bones (92.5mm) ⚠️ Tip:Lubricate pivot points and inspect CVA components regularly for wear to extend drivetrain life.

Read more less

Upgrade your drivetrain durability with the Team Associated RC10B74.1 Aluminum Center CVA Cups. This pair of precision-machined aluminum cups is designed to replace the stock units and withstand the demands of high-torque applications. Perfect for racers looking to reduce rotational mass while improving strength and longevity over stock plastic parts. 🔩 Key Features: Lightweight and durable aluminum construction Precision-machined for optimal fit and performance Direct replacement for stock CVA center cups Helps reduce rotational mass Improved strength for high-torque conditions 📦 Includes: (2) Aluminum Center CVA Cups ✅ Compatibility: Team Associated RC10B74.1 May fit other B74-series vehicles (check manual for fitment) Maintain peak drivetrain performance under pressure with this Factory Team upgrade.

Read more less

Overview:Secure your battery with confidence using the Team Associated RC10B7 Factory Team Battery Mount Set. Designed as a precision upgrade over the standard mounts, this Factory Team kit delivers improved strength, reduced flex, and a cleaner look for your B7 buggy. With its lightweight design and race-proven durability, it’s the perfect addition for serious racers who demand reliability and performance. Features: Factory Team precision-machined components for strength and fit Securely holds battery in place under high loads and hard landings Lightweight design reduces unnecessary weight Provides a cleaner, more professional chassis layout Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy Includes: (1) Factory Team Battery Mount Set (with mounting hardware) Part Number: 92482 ⚡ Pro Tip: Pair this with the B7 Factory Team Carbon Side Rails (92483) for the ultimate lightweight and rigid chassis setup.  

Read more less

  Overview:The Traxxas XX-Long Hard Chrome Shock Shafts are designed for durability and smooth suspension performance. Precision-ground and hard chrome-plated, these shafts provide resistance against wear and bending while ensuring ultra-smooth shock action, even under extreme RC driving conditions. Features: Set of 2 XX-Long shock shafts Hard chrome finish for maximum durability and smooth operation Precision-ground for exact fit and long life Direct factory replacement for Traxxas big-bore and Ultra shocks Compatibility: Traxxas Ultra Shocks and Big Bore Shocks requiring XX-Long shafts Commonly used in larger Traxxas models such as: Stampede Rustler Bandit Slash (depending on configuration) Always check your manual for exact fitment Includes: (2) XX-Long Hard Chrome Shock Shafts Part Number: 2656

Read more less

Overview:Give your XRAY XB2 ’25 the protection and style it deserves with the 1UP Racing Reusable CF Look Chassis Skin. Featuring a sleek carbon fiber appearance with bold 1up Racing logos, this heavy-duty vinyl skin not only keeps your chassis looking fresh but also protects the track surface from scratches. Built with super tacky adhesive, this skin can be peeled off and reapplied up to 7–8 times, making it one of the most durable and reusable skins available. The XB2 ’25 fitment includes a separate tailpiece section for easy access to screws when servicing the rear of your buggy. Since the rear end takes the most abuse, two extra tailpiece sections are included with every sheet! Features: Designed specifically for the XRAY XB2 ’25 Trick carbon fiber look with bold 1up Racing branding Heavy-duty vinyl with long-lasting, tacky adhesive Reusable: peel off and re-apply up to 7–8 times Separate tailpiece section allows easy maintenance Includes 2 extra tailpiece sections for extended use Compatibility: XRAY XB2 ’25 (Direct fit)

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with Medium to Thick viscosity CA glue. Package includes ten tips.

Read more less

Overview:Upgrade your motor mounting hardware with the JConcepts 3x6mm Finnisher Titanium Motor Screws. Precision-machined from lightweight titanium, these screws are both strong and stylish—giving you reduced weight without sacrificing durability. Available in Blue (2549-1) or Black (2549-2) anodized finishes, they’re the perfect blend of function and looks for your high-end RC build. Features: Machined from premium titanium for maximum strength and reduced weight Available in anodized Blue or Black finishes Low-profile Finnisher head design for a sleek look M3 x 6mm size – ideal for motor mounting applications Includes 2 screws per package Compatibility: Fits most 1/10 scale motors and motor plates that require 3x6mm screws Commonly used across popular RC racing platforms (check your motor and chassis manual for exact fitment) Part Numbers: Blue – 2549-1 Black – 2549-2  

Read more less

Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)      

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Team Associated RC10B84 Body – Clear (92554) 🏁 Race-Optimized Replacement – Designed specifically for the RC10B84 platform, this low-profile clear body delivers improved aerodynamics and the clean, aggressive Factory Team look. Perfect for racers who want both performance and a fresh canvas for custom paint schemes. ⚙️ Features:✅ Low-profile design for enhanced aerodynamics✅ Molded from durable, lightweight polycarbonate✅ Clear shell – ready for your custom paint job✅ Factory Team fit and finish for competitive racing 📦 Includes: (1) Clear RC10B84 Body (unpainted) 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair this body with lightweight wing options to further dial in downforce and stability for your track conditions.    

Read more less

Fine-tune your buggy’s handling with the Team Associated RC10B6.2 +2mm CVA Axles. The extended length helps adjust track width and driveshaft plunge for improved stability and cornering performance. Features: +2mm length for optimized track width and driveshaft geometry Precision-machined for smooth, efficient power transfer Durable construction for long-lasting performance Direct replacement for stock CVA axles Includes: (2) +2mm CVA Axles Compatibility: Team Associated RC10B6.2 Perfect for racers looking to fine-tune suspension setup and gain an edge on the track.

Read more less

(For EMB-WRC, EMB-RA, EMB-SC, EMB-TG, EMB-DT)

Read more less

(For EMB-1, EMB-MT)

Read more less

Maintain secure wheel mounting and consistent handling with the LC Racing 12mm Composite Wheel Hex Set. Designed for multiple EMB series models, these precision-molded hexes ensure a perfect fit for your wheels and deliver reliable performance in all conditions. Features: 12mm composite wheel hexes for strength and durability Precision-molded for accurate fitment and smooth rotation Lightweight design to reduce rotating mass Direct replacement for stock wheel hexes on compatible models Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT Includes: (4) 12mm Composite Wheel Hexes A must-have spare to keep your wheels locked in place and your RC running at its best.

Read more less