⚙️ Precision bearings for smooth, efficient performance. Keep your drivetrain rolling at peak efficiency with Traxxas 10x15x4mm Ball Bearings. Available in two versions — black-sealed and blue-sealed — both deliver the precision fit and durability you expect from genuine Traxxas parts, with slight differences in seal type and intended usage. 🔹 Blue-Sealed [5119] Rubber-sealed design for better dirt and moisture resistance Ideal for off-road or wet-condition running Slightly more seal drag, but greater protection in harsh environments ⚫ Black-Sealed [5119A] Tighter seal for reduced debris ingress, but optimized for lower rolling resistance Suitable for high-speed on-road or clean-condition running Minimal seal friction for smoother free-spinning performance 🛠 Which to Choose? Seal Color Best For Strengths Trade-Offs Blue (5119) Off-road, wet/muddy terrain Excellent dirt/water sealing Slightly higher rolling resistance Black (5119A) On-road, dry/clean conditions Lower friction, smoother spin Less protection in harsh conditions ✅ Precision 10x15x4mm size✅ Durable steel construction✅ Direct fit for multiple Traxxas models✅ Improves efficiency & reduces wear 📦 Includes:• (2) Ball Bearings per pack – choose Blue 5119 or Black 5119A  

Read more less

🏁 Turn Your Losi NASCAR into a Truck Series ContenderPro-Line brings the 2024 Chevrolet® Silverado® NASCAR® Truck Series body to 1/12 scale! Officially licensed by NASCAR® and Chevy®, this pre-cut clear body captures the championship-winning truck’s aggressive look with incredible scale details. Perfect for transforming your Losi® NASCAR® into a Truck Series machine. 🔹 Features: Officially licensed by NASCAR® and Chevrolet® Pre-cut for quick and easy preparation Crystal clear polycarbonate – paint it your way Includes black rear spoiler & black roll bar with mounting hardware Extensive pre-cut decal sheet with sponsor logos, side skirts & details Paint-then-peel overspray film for a professional finish Made in the USA by Pro-Line since 1982 📏 Specs: Scale: 1/12 Length: 15.3" (389mm) Width: 7" (178mm) Height: 4.2" (107mm) Wheelbase: 8.9" (226mm) Material: Polycarbonate Color: Clear (unpainted) 📦 Includes: (1) Pre-Cut 2024 Chevy® Silverado® NASCAR® Truck Series Clear Body (1) Black Rear Spoiler + Hardware (1) Black Roll Bar + Hardware (1) Extensive Pre-Cut Decal Sheet (1) Window Mask Sheet ✅ Compatibility: Losi® NASCAR® Racecar (All 2024 & 2025 Models)

Read more less

Boost the strength and style of your Rustler 4X4 or Hoss with this high-performance aluminum center driveshaft. Crafted from tough 6061-T6 aluminum, this optional upgrade offers increased durability and smoother drivetrain performance under load. It’s a direct fit for both Rustler 4X4 and Rustler 4X4 VXL, as well as Hoss models—and it's available in multiple color options to match your ride. Features:• 6061-T6 aluminum construction for added strength• Lightweight and rigid design for improved efficiency• Available in multiple anodized color options• Direct fit for Rustler 4X4, Rustler 4X4 VXL, and Hoss Includes:• (1) Aluminum Center DriveshaftPart Number: 6765 Upgrade your drivetrain and turn heads at the same time!

Read more less

🔩 Upgrade your pit setup with this premium 3-piece BOOF RC hex wrench set. Crafted from high-strength aluminum alloy, each driver features dual-head hex sleeves for quick, efficient maintenance of your RC car parts. Includes Sizes:• 4.0mm / 4.5mm• 5.0mm / 5.5mm• 7.0mm / 8.0mm Highlights:✔ Lightweight aluminum alloy construction✔ CNC-machined for precision fit✔ Comfortable knurled grip for control✔ Perfect for wheels, nuts, and hardware on most 1/10 and 1/8 scale RC vehicles 🔧 Durable. Accurate. Ready for race day.BOOF RC – Tools that keep you dialed in      

Read more less

Fine-tune your chassis stiffness with the Team Associated RC10B6.4/B6.4D Factory Team Carbon Top Plate & Ball Stud Mount. This precision-crafted upgrade offers enhanced rigidity while allowing adjustable flex, giving racers more control over handling characteristics. Features: Carbon fiber construction for lightweight strength Adjustable top plate stiffness for fine-tuning handling Includes ball stud mount for secure, precise linkage connection Factory Team quality for professional-grade performance Compatibility: Team Associated RC10B6.4 Team Associated RC10B6.4D Includes: (1) Carbon Top Plate (1) Ball Stud Mount Perfect for competitive racers looking to dial in their chassis response and steering feel.

Read more less

Team Associated RC10B6.3 Front Top Plate & Ballstud Mount. Package includes replacement top plate and ballstud mount for the Team Associated B6.3 and B6.3D kits, but is also compatible with the B6.1, B6.2, SC6.1, SC6.2, T6.1 and T6.2 models.  COMPATIBILITY: Team Associated RC10 SC6.1Team Associated RC10 SC6.2Team Associated RC10 T6.1Team Associated RC10 T6.2Team Associated RC10B6.1Team Associated RC10B6.1 Factory LiteTeam Associated RC10B6.1DTeam Associated RC10B6.2Team Associated RC10B6.2DTeam Associated RC10B6.3Team Associated RC10B6.3D

Read more less

This is a pack of two replacement Team Associated RC10B74 Rear Hub Hinge Pins.  COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D

Read more less

Team Associated Factory Team RC10T6.2/SC6.2 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated T6.2 and SC6.2 platforms. Constructed from high quality titanium these offer increased durability over stock components while shedding weight and replace all the stock turnbuckles. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY:   Team Associated RC10 SC6.2Team Associated RC10 T6.2 

Read more less

MIP Gen 2 Metric Nut Drivers Set (5.5 & 7.0mm) [MIP9603] 🔧 The Nut Drivers You’ll Actually Look Forward to UsingBuilt for RC pros and garage tinkerers alike, the MIP Gen 2 Metric Nut Driver Set delivers unmatched comfort, grip, and precision. This 5.5mm & 7.0mm duo brings upgraded durability, smoother performance, and serious style to your toolbox. 🔥 What’s New in Gen 2:✅ Laser-Etched Markings – Always know what size you're grabbing🎨 Color-Coded Rings – Stop guessing. Start wrenching.🛡️ Black Oxide Finish – Tougher than your last pair 🔩 Nut Driver Highlights: Deep Socket Heads – No more fighting with long screws Thin Wall Design – Squeeze into the tight spots with ease Ergonomic Handles – Cold-proof, hot-proof, hand-happy USA Made & Hand Assembled – Built right, every time 📦 Includes:(1) Gen 2 Metric Nut Driver – 5.5mm(1) Gen 2 Metric Nut Driver – 7.0mm 🧰 Part Number: MIP9603🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

Traxxas Battery Expansion Hold Down Retainer Kit – Part #5827X🔋 More Power, More Room. Upgrade your Slash or Slash 4x4 with the Traxxas 5827X Battery Expansion Kit and unlock the ability to run taller LiPo packs—up to 42mm—in your stock battery tray. Designed for a secure fit and quick installs, this expansion kit gives you the freedom to run high-capacity packs without aftermarket mods. ✅ Fits Slash & Slash 4x4 stock trays✅ Allows LiPo packs up to 42mm tall✅ Durable construction with angled clip for secure hold✅ Easy install with no chassis modifications needed 📦 Includes: (1) Extended Battery Strap (1) Battery Strap Retainer (1) Battery Post (1) Foam Spacer (1) Angled Body Clip

Read more less

  Boof RC T Plug Male to TRX-Style Female Adapter Connect with Confidence. Power What Matters. This Boof RC adapter allows you to convert a standard T Plug (Deans-style) connection to a TRX-style plug, making it perfect for adapting batteries to Traxxas®-type vehicles—without the trademark headaches. ✅ T Plug (Male) to TRX-Style (Female)✅ Compact and convenient—no soldering required✅ 14AWG silicone wire for solid current flow✅ Compatible with many Traxxas-style ESCs and vehicles✅ Approx. 5cm wire for flexible routing 📦 Includes:(1) Boof RC T Plug Male to TRX-Style Female Adapter 🧠 Pro Tip: Great to have in your pit box for quick swaps when running mixed battery styles.

Read more less

Boof RC T-Plug Male to EC3 Female Adapter🔌 Quick Conversion. Clean Power. Need to connect a battery with a T-style plug to a device or charger that uses EC3? This compact Boof RC adapter gets the job done without soldering or hassle. Designed with precision and convenience in mind, it’s a must-have for every pit box. ✅ T-Plug (Deans-style) Male to EC3 Female✅ 14AWG silicone wire for dependable current delivery✅ 5cm short lead keeps setup tidy✅ Plug-and-play—no tools needed✅ Great for batteries, chargers, or ESC conversions 📦 Includes:(1) T-Plug Male to EC3 Female Adapter 💡 Boof Tip: Simplify your wiring setup without compromising performance.  

Read more less

Boof RC Adapter – EC3 Male to EC5 Female (10cm, 12AWG Wire) Need to bridge the gap between EC3 and EC5? This Boof RC adapter is built with 12AWG wire and a compact 10cm length—perfect for charging or connecting different gear with ease. ✅ EC3 Male to EC5 Female✅ 12-gauge wire for strong, reliable current flow✅ 10cm length keeps your wiring clean and manageable✅ Ideal for charging setups or plug conversions 🔌 Connector A: EC3 (Male)🔌 Connector B: EC5 (Female)📏 Wire: 12AWG, 10cm (approx. 4 inches) 💡 Boof Tip: This adapter keeps your pits tidy and your packs compatible—no more plug limitations.

Read more less

Team Associated 20mm Aluminum Clamping Servo Horn – 25T (Futaba/Savox/ProTek) – Part 1368Smooth Response. Secure Fit. Built to Perform. The Team Associated 20mm Aluminum Clamping Servo Horn (1368) is crafted from 7075 T6 aluminum for strength and precision. Designed for 25T spline servos (Futaba, Savox, ProTek, and others), this horn features a secure clamping design and a 20mm length that delivers smoother, more controlled steering input—ideal for 1/10 scale touring cars and competition setups. ✅ 7075 T6 aluminum construction – lightweight and incredibly strong✅ 20mm length – delivers smoother, more progressive steering feel✅ Clamping design – prevents spline slop and servo damage✅ Laser-etched spline size – easy, accurate identification✅ Compatible with Futaba, Savox, ProTek (25T spline)✅ Includes large M2.5 screw for secure clamp fit 📦 Includes: (1) 20mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1368 💡 Pro Tip: Always torque the clamp screw securely to lock in performance and reduce servo spline wear.

Read more less

  Traxxas Front & Rear Body Mount Set w/Hardware Part #: 1914R Restore or customize your Traxxas ride with this Front & Rear Body Mount Set. Designed for durability and adjustability, this set is ideal for Slash, Rustler, Stampede VXL, and Ford Raptor model trucks. Whether you're replacing broken mounts or adjusting body height, this complete set has you covered. 📦 Includes: (2) 52mm Body Posts (2) 38mm Body Posts (2) 25mm Body Posts (2) 6.5mm Body Posts (2) Body Post Extensions Replacement Hardware ✅ Features: Genuine Traxxas replacement parts Adjustable height with included extensions Strong composite construction Compatible with: Slash (standard and Ford Raptor models) Rustler & Rustler VXL Stampede VXL 🛠️ Keep your body shell mounted securely and race-ready with this complete mounting kit!

Read more less

  Spektrum S2200 G2 AC Dual Smart Charger Next-Level Charging. Made Easy. Take your charging game to the next level with the Spektrum™ S2200 G2 AC Smart Charger — designed for RC pilots and bashers who demand speed, safety, and simplicity. With up to 200W per channel (or 380W on a single channel), this 2-port charger makes battery management faster, smarter, and safer than ever. 🔋 Key Features: ✅ Dual Channel Power: Charge two packs at once — up to 200W per channel or 380W on one channel ✅ Auto Charge Technology: Automatically detects Smart battery parameters for effortless charging ✅ No Balance Leads Needed: Charges and balances Smart G2 batteries through a single IC3® or IC5® connection ✅ IC3® & IC5® Ports Included: No adapters needed for Smart batteries ✅ Real-Time Countdown Clock: Know exactly when your pack is ready ✅ Updated Interface: Large 2.8" screen with intuitive menus and navigation ✅ USB I/O Ports: Charge devices and update firmware ✅ Low-noise cooling fan & built-in ON/OFF switch ✅ Backwards compatible with EC3™ & EC5™ connectors 📦 Includes: (1) S2200 G2 AC Smart Charger (1) Detachable Power Cord (1) IC3® and IC5® Output Ports (selectable) ⚙️ Specifications: Input Voltage: 100–240V AC Max Charge Rate: 20A Supported Batteries:• 1–6S LiPo, LiIon, LiFe• 1–16 cell NiMH/NiCd• 1–12 cell Pb Discharge Rate: 0.1–1.5A Output Power: 2x200W or 1x380W Safety Features: Overcurrent, reverse polarity, thermal, short circuit, safety timer Connectivity: USB port, PC compatible Dimensions: 5.7" x 5.67" x 4.13" Weight: 37.7oz (1070g) 💡 Perfect for Smart G2 batteries — charge, balance, and go with just one connection.📈 Ideal for the bench, pit, or track.

Read more less

Arrma Mod 0.5 Pinion Gear (3.2mm Bore) – Multiple Tooth Options 🔧 Fine-Tune Your Gear Ratio with Precision! Upgrade or maintain your Arrma 1/14 Typhon Grom 223S or 1/16 Mojave Grom 223S with the Arrma Mod 0.5 Pinion Gear. Designed for smooth and efficient power transfer, this hardened steel pinion delivers the durability and reliability needed for high-speed runs and tough off-road conditions. 🛠 Features:✔️ Durable Steel Construction – Built for long-lasting performance✔️ 3.2mm Bore – Ensures a secure fit on compatible motor shafts✔️ Smooth Power Transfer – Optimized for efficiency and reliability✔️ Easy Installation – Quick setup with the included 3x4mm set screw✔️ Multiple Tooth Options – Choose the right gear for your performance needs! 📦 Includes: (1) Mod 0.5 Pinion Gear (Choose from 16T–31T) (1) 3x4mm Set Screw ⚙️ Compatibility:✅ Arrma Mojave Grom 223S✅ Arrma Typhon Grom 223S 🔩 Optimize Your Gear Ratio & Performance Today!

Read more less

Pro-Line Dumont 3.8" Pre-Mounted Paddle Tires (Z3) – 2-Pack Dominate Sand & Snow with Extreme Roosting Power! The Pro-Line Dumont 3.8" Pre-Mounted Truck Tires bring next-level performance for sand and snow bashing. Designed with cutting-edge paddle technology, these high-grip tires feature large offset V-shaped paddles for maximum traction and roosting action, flinging dirt, sand, and snow like never before! Mounted on Pro-Line’s Raid 8x32 Removable Hex Wheels, these tires provide exceptional durability and easy hex replacement, ensuring long-lasting performance. Whether you're ripping through sand dunes or carving through winter terrain, the Dumont 3.8” tires deliver unstoppable power and control. Key Features: ✅ Extreme Paddle Tread Design – Throws sand, snow, and dirt with ease.✅ Offset V-Shaped Paddles – Provides maximum roosting power and grip.✅ Pre-Mounted on Raid 8x32 Wheels – Hassle-free installation with removable hex system.✅ Durable Paddle Tire Rubber – Made from long-lasting, stiff compound.✅ Closed-Cell Foam Inserts Included – Enhances stability and performance.✅ Embedded Pro-Line Logos – Authentic Pro-Line styling and premium look.✅ Made in the USA – Quality you can trust from Pro-Line since 1982. Specifications: Application: Sand & Snow Bashing Scale: 1/8 Height: 7.25" (184mm) Width: 3.26" (83mm) What's Included: ✔ (2) Pro-Line Dumont 3.8” Tires (Pre-Mounted on Raid 8x32 Wheels) Compatible With: 🔹 Arrma Kraton 6S BLX🔹 Traxxas E-Revo VXL 2.0🔹 Traxxas Maxx🔹 Traxxas Summit 1/10 🔥 Unleash Ultimate Traction in Sand & Snow with Pro-Line Dumont 3.8” Tires! 🔥

Read more less

⚡ Spektrum RC Smart PowerStage Surface Bundle w/3S Smart 30C LiPo Battery (1300mAh) (IC2) ⚡ 🔋 Compact & Powerful Smart Charging Solution! Looking for a fast, reliable, and compact power solution for your RC? The Spektrum Smart PowerStage Surface Bundle delivers high-performance charging and battery management in an affordable, all-in-one package. 🚀 This bundle features the S100 Smart USB-C Charger and a 3S 1300mAh 30C Smart G2 LiPo Battery, designed to maximize power, efficiency, and ease of use. With one-step charging, automatic battery recognition, and Smart balancing, this system makes RC charging simpler than ever! ✅ 🔹 Key Features: ✅ Advanced Smart Charging Technology – Automatically detects battery type & charging parameters.✅ One-Step Charging – No separate balance leads needed with Smart G2 batteries.✅ USB-C Powered – Convenient, portable charging anywhere.✅ 3S 1300mAh LiPo Battery – High-performance power for small-scale RC vehicles.✅ 30C Discharge Rate – Delivers strong, consistent power output.✅ Fast Charging (5C Max) – Charge quickly & get back to the action.✅ Integrated Smart Features – Auto-discharge, battery health monitoring, and data storage.✅ Durable Hard Case Design – Protects against impact and ensures long-lasting performance.✅ IC2 Connector – Secure and efficient power connection. 📦 Includes: ✔️ (1) Spektrum S100 1x100W USB-C Smart Charger✔️ (1) Spektrum 3S 1300mAh Smart 30C LiPo Battery (IC2 Connector)✔️ (1) 65W USB-C Power Supply✔️ (1) Battery Adapter✔️ (1) Product Instruction Manual 📏 Specifications: Charger: 🔹 Input Power: DC🔹 Input Connector: USB-C🔹 LiPo Compatibility: 1-4S🔹 Charge Power: 1x100W🔹 Dimensions: 3.86 x 2.83 x 1.42in (98 x 72 x 36mm)\ Battery: 🔹 Nominal Voltage: 11.1V (3S)🔹 Capacity: 1300mAh🔹 Discharge Rate: 30C🔹 Maximum Charge Rate: 5C (6.5A)🔹 Connector Type: IC2🔹 Battery Type: Smart G2 Hard Case LiPo🔹 Dimensions: 3.92 x 1.33 x 0.79in (100 x 34 x 20mm)🔹 Weight: 3.92oz (111g) 🏁 Needed to Complete: 🚫 Nothing! Just charge and go! 💡 Upgrade your power system with Smart Technology! Experience faster charging, smarter battery management, and improved performance with the Spektrum Smart PowerStage Bundle. 🔋 Charge smarter, drive longer, and bash harder! 🚀 #SpektrumSmart #LiPoBattery #SmartCharger #RCCharging #RCPerformance #ArrmaGrom #RCUpgrades  

Read more less

This is a replacement 35-tooth heavy duty differential ring gear for the Traxxas X-Maxx.  Designed for use with front or rear heavy duty 11-tooth differential pinion gears (#7790 & #7791). Package contains one ring gear. Replacement part(s) for these models:X-MAXX WITH 8S ESCModel #77086-4

Read more less

🏁 Maximum Front Grip. Wide Stability. Carpet Racing Performance. Take your 2WD buggy handling to the next level with the JConcepts Pin Swag LP Wide Front Tires. Combining the proven side lug design of the Swagger front tire with a dense pin layout, the Pin Swag delivers exceptional steering precision, stability, and corner speed on today's high-bite carpet tracks. Pre-mounted and race-ready, these wide-profile front tires feature a larger contact patch for increased grip and smoother handling while the lightweight carcass design helps keep your buggy responsive and consistent throughout the race. ⚡ Features: 🏁 Pre-mounted and ready to race right out of the package🛞 Wide-body carcass design for increased front-end grip⚙️ Pin Swag combination tread pattern for superior steering response🎯 Dense pin layout helps reduce tire wear and maintain consistency💪 Hefty base pins with crisp edges for maximum bite🔧 Low-profile design improves handling precision⚡ Ultra-lightweight scalloped tire bead reduces rotating mass🚀 Optimized specifically for 2WD buggy front applications 📦 Includes: (2) JConcepts Pin Swag LP Wide 2.2" Pre-Mounted 2WD Front Buggy Tires 📏 Specifications: Part Number: JCO4062Wheel Size: 2.2"Position: FrontApplication: 2WD BuggySurface: CarpetCompound: PinkHex Size: 12mmMounting: Pre-Mounted 🔧 Perfect For: 🏁 Carpet Off-Road Racing🚗 Team Associated B6 Series🚗 Team Associated B7 Series🚗 TLR 22 Series🚗 Schumacher 2WD Buggies🚗 Most 1/10 2WD Race Buggies with 12mm Hex Front Wheels 💡 Pro Tip: The Pin Swag has become a go-to front tire for high-grip carpet racing because it provides aggressive steering without becoming overly twitchy. Pair them with JConcepts Ellipse, Fuzz Bite, or Carpet Web rear tires for a balanced and confidence-inspiring setup. 🏁🔥🛞

Read more less

Suspension Arm Overview:This is a replacement set of suspension arms designed for select Traxxas 4x4 platforms. These arms serve as the main connection point for the chassis, shocks, and axle carriers, helping maintain proper suspension movement and durability 🔧 Key Features ✔ Replacement suspension arms✔ Durable construction✔ Supports shocks and axle carriers✔ Maintains proper suspension geometry✔ Direct fit design 📦 Includes (1) Suspension Arm Set 🚗 Compatibility Traxxas Slash 4x4 Traxxas Rustler 4x4 Traxxas Stampede 4x4 Traxxas Bigfoot No. 1 Traxxas XO-1 Ideal for replacing worn or damaged components, these suspension arms help restore proper handling and performance.  

Read more less

Turnbuckle Overview:This is a replacement set of camber link turnbuckles designed for select Traxxas models. Pre-assembled with rod ends and hollow balls, they provide easy installation and precise suspension adjustment. 🔧 Key Features ✔ 39mm camber link turnbuckles✔ 69mm center-to-center length✔ Pre-assembled with rod ends and hollow balls✔ Includes left and right side✔ Allows precise camber adjustment✔ Direct fit replacement 📦 Includes (1) Left Turnbuckle Assembly (1) Right Turnbuckle Assembly 🚗 Compatibility Traxxas Drag Slash Traxxas Hoss Traxxas Nitro Slash Traxxas Rally Traxxas Rustler 2WD Traxxas Rustler 4x4 Traxxas Slash 2WD Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 2WD Traxxas Stampede 4x4 Ideal for replacing worn or bent links, these turnbuckles help maintain proper suspension geometry and allow for accurate camber tuning.  

Read more less

Built for serious stock-class racers, the ProTek RC 2S 150C Stock Spec 4800mAh Shorty LiPo delivers explosive punch, ultra-low internal resistance, and consistent voltage from tone to tone. Featuring advanced Si-G cell technology and a low-profile LCG shorty design, this pack keeps your car balanced, planted, and fast all the way to the last lap. If you're chasing consistency and clean power delivery in 2WD or 4WD stock racing — this is the pack. ⚡ Stock-Class Performance You Can Trust With 150C discharge capability and extremely low internal resistance, this battery provides: Strong acceleration Stable voltage under load Lower operating temperatures Improved efficiency Extended cycle life The shorty LCG form factor helps optimize chassis balance and weight placement for modern race platforms. 🏁 Designed for Stock Racing This pack is engineered specifically for stock-class competition where smooth, consistent voltage is critical. The improved efficiency and reduced heat build-up keep performance predictable and reliable throughout your main. Features 4800mAh capacity 150C high-discharge rating Low IR Si-G cell technology LCG shorty hardcase design Lighter and thinner profile Strong runtime with aggressive punch 10C maximum charge rate (1C recommended for longest life) ROAR approved Includes (1) ProTek RC 2S 4800mAh Battery (2) 5mm Bullet Connectors Specifications Nominal Voltage: 7.4V (2S) Capacity: 4800mAh Max Charge Rate: 10C (40A) Peak Discharge: 150C Cell Configuration: 2S1P Watt Hours: 35.5Wh ROAR Approved: Yes Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions: 95.3 x 46.9 x 21.2mm Weight: 190g ⚠️ Important LiPo Safety Always balance charge Use a LiPo-specific charger Never leave charging batteries unattended Do not over-discharge (minimum 3.2V per cell) Use a LiPo safe charging bag Allow pack to cool before recharging Reliable voltage. Strong punch. Championship consistency. 🏆  

Read more less

This is a replacement Traxxas Steering Bellcrank Set. Package includes steering bellcranks, servo saver, servo saver spring, servo spring retainer, servo horn and hardware.  COMPATIBILITY: Traxxas BanditTraxxas Drag SlashTraxxas HossTraxxas RallyTraxxas Rustler 2wdTraxxas Rustler 4x4Traxxas Slash 2wdTraxxas Slash 4x4Traxxas Slash 4x4 UltimateTraxxas Stampede 2wdTraxxas Stampede 4x4Traxxas Telluride 4x4Traxxas XO-1

Read more less

The Team Losi Racing TLR334071 Aluminum VHA Hub Body Set is a precision-machined option upgrade for the 22 5.0 platform. Manufactured from aluminum and finished in black anodizing with a silver chamfered edge, these hub bodies improve durability, consistency, and overall rear suspension performance compared to plastic components. Designed for racers looking to enhance reliability and fine-tune handling characteristics on high-grip or demanding track conditions. 🔧 Features Genuine Team Losi Racing option parts CNC-machined aluminum hub bodies Black anodized finish with silver chamfered edges Increased strength and durability over plastic hubs Designed for VHA (Variable Height Axle) configurations Direct fit for compatible 22-series platforms 📦 Includes (2) Aluminum VHA Hub Bodies ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X

Read more less

Take your SCX24 or 1/18 micro crawler to the next level of performance with the officially licensed Maxxis Trepador 1.0" Pre-Mounted Tires. Standing at a massive 2.5" tall, these oversized crawler tires deliver extreme traction, aggressive styling, and the ultimate capability for rocks, sand, loose dirt, and technical terrain. Mounted on true 3-piece Holcomb bead-loc wheels—scaled down from Pro-Line’s full-size 1/10 design—this set is ready for instant installation and max grip right out of the package. 🧱 Tire Overview Designed from the real 1:1 Maxxis Trepador, these mini tires replicate: Ultra-aggressive sidewall lugs for superior rock bite Multi-curve tread blocks for traction on loose and slippery surfaces Staggered tread elements that maintain a consistent contact patch Oversized 2.5" height (63.5mm) for huge ground clearance Made from a soft-performance compound, these tires provide incredible adhesion on technical rock lines and trail obstacles. ⭐ Key Features Officially licensed Maxxis Trepador tread Oversized 2.5" (63.5mm) outer diameter for extreme crawling clearance Soft compound for maximum real-world traction Ultra-aggressive sidewall for sand, rock, and dirt True 3-piece bead-loc Holcomb wheels (no glue required) +2mm wheel offset for a wider, more stable stance Pre-mounted for fast installation Made in the USA 📏 Specifications Scale: 1/24 & 1/18 Outer Diameter: 2.5" (63.5mm) Inner Diameter: 1.0" Width: 0.83" (21mm) Wheel Hex: 7mm 📦 Includes (4) Maxxis Trepador 1.0" Tires (Pre-Mounted) (4) Black Holcomb 3-piece Bead-Loc Wheels

Read more less

Refresh your steering precision and durability with the Traxxas 6832 Caster Block Set, available in both high-strength plastic and premium aluminum versions. Whether you're maintaining a stock setup or upgrading for maximum durability, these caster blocks deliver a perfect fit and reliable performance on Traxxas 1/10 vehicles that use the 6832 design. Choose the option that fits your build — from lightweight molded composite to color-anodized aluminum for added strength and style. Plastic Caster Block Features Durable molded composite construction Direct factory replacement Lightweight and impact-resistant Available in Black, Red, Blue, Green, or Orange Ideal for maintenance, spares, or restoring OEM handling Aluminum Caster Block Features CNC-machined aluminum for maximum durability Improves steering precision and long-term wear resistance Color-anodized finish for style and corrosion protection Perfect upgrade for high-power, high-impact setups Compatibility Fits Traxxas 1/10 scale vehicles that use the 6832 caster block design Popular models include Slash 4x4, Stampede 4x4, Rustler 4x4, and others using the same front-end geometry Why Choose Plastic vs. Aluminum? Plastic: Lightweight Cost-effective More forgiving in crashes Aluminum: Stronger and more precise Better for high-speed or high-impact driving Enhanced steering feel and durability

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

Upgrade your Arrma Mojave Grom with the Hot Racing Aluminum Front Lower Arm Set — a tough, precision-machined suspension upgrade built to handle the hardest hits and roughest terrain. Crafted from high-quality CNC aluminum, these arms offer a major durability boost over stock plastic components, improving rigidity, handling, and overall suspension accuracy. Whether you're bashing, jumping, or trail-running, these arms help keep your front end planted and predictable. Key Features: ✔️ CNC-Machined Aluminum Construction – Stronger and more rigid than stock composite arms✔️ Improved Handling & Stability – Enhanced suspension precision under load✔️ Anodized Black Finish – Clean, premium look with added corrosion resistance✔️ Direct Replacement Fit – Installs easily with no modifications✔️ Built for Grom Performance – Ideal upgrade for demanding off-road use Includes: (2) Aluminum Front Lower Arms Compatibility: Arrma Mojave Grom (1/18 4WD)    

Read more less

⚙️ Built Tough. Tuned Precise. Ready for Anything. Upgrade your TRX4M drivetrain with INJORA Black Hardened Steel Drive Shafts, precision-machined for strength, accuracy, and a tight, vibration-free fit. Designed specifically for the 1/18 TRX4M Defender and Bronco, these shafts feature D-shaped and rounded rectangle holes for a more secure connection, plus correct in-phase design for smooth power delivery. ⚡ Features: 🔩 CNC-machined hardened steel for maximum durability and torque resistance 🧩 In-phase design ensures smooth and balanced power transfer 🔒 D-shaped and rounded rectangle holes create a tighter, more reliable connection 🪶 Enhanced structure for extended lifespan and superior drivetrain stability 🖤 Black-coated finish with etched INJORA logo for premium style and protection 🧠 True-to-scale joint and spline design maintains a realistic crawler appearance 📏 Specifications: Part Number: 4M-50BK Material: Hardened Steel Color: Black Weight: 22 g (0.78 oz) 📦 Includes: (2) Hardened Steel Drive Shafts (4) Mounting Screws 🔧 Compatibility: 1/18 Traxxas TRX4M Defender 1/18 Traxxas TRX4M Bronco 💡 Pro Tip:Pair these with INJORA stainless or brass link kits to maximize driveline durability and reduce flex when tackling extreme terrain.

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

Give your Mini-Z the F1-inspired look with PN Racing’s machine-cut 10-spoke front wheels. Designed for 2WD Mini-Z platforms, these wheels combine lightweight precision with sleek, aggressive styling. Available in Yellow or White, and in multiple offsets (F0–F3) to fine-tune your setup. ✅ F1 Style – 10-spoke design brings open-wheel race car looks to your Mini-Z✅ Machine Cut – Ensures perfect balance and smooth performance on track✅ Multiple Offsets – Choose F0–F3 for the exact stance and handling you need✅ Color Choices – Bold Yellow or Crisp White to match your build Step up your Mini-Z’s style and performance with PN Racing’s 10-Spoke F1 Wheels – the perfect upgrade for racers who want both speed and looks.  

Read more less

Overview:Secure your battery with confidence using the Team Associated RC10B7 Factory Team Battery Mount Set. Designed as a precision upgrade over the standard mounts, this Factory Team kit delivers improved strength, reduced flex, and a cleaner look for your B7 buggy. With its lightweight design and race-proven durability, it’s the perfect addition for serious racers who demand reliability and performance. Features: Factory Team precision-machined components for strength and fit Securely holds battery in place under high loads and hard landings Lightweight design reduces unnecessary weight Provides a cleaner, more professional chassis layout Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy Includes: (1) Factory Team Battery Mount Set (with mounting hardware) Part Number: 92482 ⚡ Pro Tip: Pair this with the B7 Factory Team Carbon Side Rails (92483) for the ultimate lightweight and rigid chassis setup.  

Read more less

  Overview:The Traxxas 7mm Wheel Hub Hex Set is a genuine replacement part for the TRX-4M 1/18 scale crawler. Precision-molded for durability, these hubs provide a secure and accurate wheel fit, ensuring smooth power transfer from the axles to the wheels. Perfect for replacing worn or damaged hubs, they help maintain your TRX-4M’s performance on any trail. Features: Includes 4 wheel hub hexes 7mm size for a secure wheel fit Durable construction for long-lasting performance Direct factory replacement for quick and easy installation Genuine Traxxas part for guaranteed quality and fit Compatibility: Traxxas TRX-4M 1/18 Scale Crawler (all versions: Bronco, Defender, etc.) Includes: (4) 7mm Wheel Hub Hexes Part Number: 9750X

Read more less

(For EMB-WRC, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT, LC12B1)

Read more less