ProTek RC 48P Lightweight Aluminum Pinion Gear (13T–38T)⚙️ Hard Anodized | Lightweight | 3.17mm Bore The ProTek RC 48 Pitch Lightweight Aluminum Pinion Gear is engineered for serious racers looking to reduce rotating mass and increase throttle response. These precision-cut gears are CNC-machined from high-quality 7075-T6 aluminum and hard anodized for exceptional durability and performance. Ideal for off-road and on-road applications using 48 pitch gears, they feature laser-etched tooth counts for quick identification and a lightweight design that promotes quicker motor spool-up and improved acceleration. 🔧 Features: 48 pitch Available in 13T–38T sizes CNC-machined 7075-T6 aluminum Hard anodized for strength and wear resistance Lightweight design with additional machining on 18T and larger Tooth count laser-etched for easy ID Includes set screw for secure mounting 3.17mm (1/8") motor shaft bore 🚀 Optimize your drivetrain with reduced rotational mass and faster response out of corners! 🧩 Includes: (1) Pinion Gear (select size from dropdown) (1) Set Screw

Read more less

⚙️ Team Associated Octalock 48P Spur Gear (72T–87T) Precision. Performance. Proven. Upgrade your drivetrain with the Team Associated Octalock 48 Pitch Spur Gear, designed for smooth, efficient power delivery in competitive RC racing. Compatible with Team Associated’s Octalock slipper pads, this gear ensures consistent engagement and improved durability under high-stress conditions. Perfect for fine-tuning your gearing setup, the Octalock spur gears are available in a range of tooth counts from 72T to 87T, allowing racers to dial in their ideal gear ratio for track conditions. 🔩 Features: 🔧 Octalock Pad Compatibility – Designed to pair with Octalock slipper pads for secure engagement 🏁 Precision Molded – Lightweight and durable plastic construction ⚙️ 48 Pitch (48P) – Ideal for 1/10 scale competition vehicles 🔢 Available in Multiple Sizes – Choose from 72T to 87T for perfect gearing customization 📦 Includes: (1) Team Associated Octalock 48P Spur Gear (select tooth count) 📌 Note: Make sure to select the correct tooth count for your application when adding to cart. Boost your setup with race-proven gear precision—Octalock it down

Read more less

🔩 BOOF RC 48P Aluminum Pinion Gear (16T–40T) This is a BOOF RC 48 Pitch Lightweight Aluminum Pinion Gear — precision-engineered for off-road applications where quicker motor spool-up and acceleration make all the difference. CNC-machined from aluminum and hard anodized for strength, these gears are built to deliver smooth, consistent power. Gears 16T and larger feature weight-reducing cuts on the back side, maximizing performance without compromising durability. Each gear includes a setscrew for easy installation. 💡 Choose your tooth count from the menu above. ✅ Features: 48 Pitch, perfect for a wide range of off-road vehicles Available in 16T to 40T sizes Lightweight, hard-anodized aluminum construction Machined for precision and durability Reduced rotating mass = faster acceleration Includes setscrew BOOF RC sticker included

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Traxxas 48P Spur Gear (86T)Part #: 4686 Fine-tune your gearing with this optional 48-pitch, 86-tooth spur gear from Traxxas. Whether you're looking to optimize for more torque or higher top-end speed, this precision-molded gear delivers consistent performance and smooth power delivery. Features: Optional 48-pitch 86-tooth spur gear Ideal for adjusting gear ratios for better torque or speed Durable molded construction Genuine Traxxas quality and reliability Includes: (1) 86T 48P Spur Gear Note: Be sure to verify pitch compatibility with your pinion gear before installing.

Read more less

Traxxas 90T Spur Gear – 48 Pitch – Part 4690Optional Gearing. Maximum Torque. Smooth Power Delivery. The Traxxas 90-Tooth Spur Gear (Part 4690) is a high-tooth-count option for drivers looking to increase low-end torque and improve throttle control. Designed for 1/10 scale Traxxas vehicles using 48-pitch gears, this spur is perfect for tight tracks, crawling setups, or slower-speed applications where control matters most. ✅ Tooth Count: 90T – increases torque and low-end response✅ Pitch: 48P – fine-pitch for smooth and quiet operation✅ Optional upgrade for fine-tuning gear ratio✅ Durable molded construction – built to handle real-world use✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 90-Tooth 48P Spur Gear Part #: 4690  

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Traxxas 48P Spur Gear (76T)Part #: 4676 This 76-tooth, 48-pitch spur gear is a direct replacement from Traxxas, ideal for dialing in your gearing for optimal performance. Whether you're fine-tuning for acceleration or speed, this gear provides smooth, reliable power transfer. Features: Genuine Traxxas replacement part 48-pitch, 76-tooth gear Perfect for customizing gear ratios Durable molded construction Includes: (1) 76T 48P Spur Gear Note: Ensure pitch compatibility with your pinion gear before installation.  

Read more less

Upgrade your drivetrain with the ProTek RC Hardened Steel 32 Pitch Pinion Gears. Perfect for high-performance 1/10 and 1/8 scale applications, these pinions feature a 5mm bore with a precision-fit reducer sleeve (3.17mm) for versatile use across multiple motor shafts. Built from hardened steel, they’re ready to handle extreme brushless power and heavy loads without stripping. Features: Hardened steel construction for durability and long life 32 Pitch (Mod 0.8) – ideal for high torque and brushless setups 5mm bore with included 3.17mm reducer sleeve for universal fit Laser-etched tooth count for easy identification Available in 11T–20T (PTK-8056 through PTK-8063) Included Sizes & Part Numbers: 11T – PTK-8056 12T – PTK-8057 13T – PTK-8058 14T – PTK-8059 15T – PTK-8060 16T – PTK-8061 17T – PTK-8062 18T – PTK-8063 19T – PTK-8064 (if stocked) 20T – PTK-8065 (if stocked) Why You’ll Love It:Whether you’re dialing in your gearing for max speed or torque, ProTek pinions are built tough and deliver reliable performance on or off-road.  

Read more less

Traxxas Plastic Servo Gear Set – 2070/2075 Part #: 2072A Restore your Traxxas 2070 or 2075 servo with this factory replacement plastic gear set. Perfect for quick fixes and keeping your steering or throttle responsive and reliable. ✅ Features: Direct replacement for Traxxas 2070 & 2075 servos Includes precision plastic gears and two bearings Quick and easy installation 🛠️ Also Consider: 💡 Looking for long-term durability?Upgrade to the Traxxas Metal Gear Set (TRA2072R) for added strength and performance under high-stress conditions. 📦 Includes: (1) Complete Set of Plastic Gears (2) Servo Bearings For use with: Traxxas 2070 & 2075 servos 🔧 Keep a spare set in your pit box – fast, easy repair when you need it most!

Read more less

Upgrade your drivetrain with the durability and precision of the Traxxas Hardened Steel Mod 1.0 Pinion Gear. Designed for high-power setups, this 20-tooth gear features a 5mm bore and Mod 1 tooth pitch, making it perfect for brushless applications and heavy-duty RC builds. 🔩 Includes: (1) Hardened Steel 20T Pinion Gear (Mod 1.0, 5mm bore) (1) Set Screw ✅ Features: Made from tough hardened steel for long-lasting performance Mod 1.0 pitch for compatibility with high-torque drivetrains Fits motors with 5mm output shafts Ideal for 1/8 scale vehicles and high-power brushless setups Whether you're bashing or racing, this pinion gear delivers strength and reliability when it counts.

Read more less

  Traxxas Planetary Differential Gears & Shafts – Part 2382Restore the Heart of Your Diff. Keep your drivetrain smooth and reliable with this replacement set of internal differential gears and shafts from Traxxas. Whether you're rebuilding a worn diff or stocking up for maintenance, Part 2382 gives you everything you need inside the case. ✅ Direct-fit OEM replacement – fits standard Traxxas planetary differentials✅ Includes planet gears + internal shafts – complete internal gear set✅ Smooth power transfer – maintains tight handling and acceleration✅ Great for rebuilds or spares – essential for long-term performance 📦 Includes: (4) Planet Gears (2) Internal Gear Shafts Part #: 2382 🔧 Pro Tip: Pair with fresh diff grease and new output gears for a complete differential refresh.

Read more less

Team Associated RC10B7 Gear Differential Set – Reliable Power Transfer for the Track! ⚙️ Keep your buggy’s drivetrain running smooth and efficient with the Team Associated RC10B7 Gear Differential Set!Designed as a direct replacement for the RC10B7 and RC10B7D, this factory gear diff delivers durability, consistent performance, and easy maintenance — essential for serious racers. ✨ Key Features: ⚙️ Complete Factory Replacement Gear Differential – Designed specifically for peak performance with the RC10B7 and B7D 🛠️ Durable Construction – Built to withstand the demands of 1/10 off-road racing 🏁 Smooth and Reliable Power Delivery – Maintains consistent handling and traction under race conditions 🔧 Easy to Service – Designed for fast rebuilding and tuning between heats 📦 Includes: ✔ (1) Complete RC10B7 Gear Differential Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Differential fluid is not included and must be purchased separately.🔹 Check your manual for recommended fluid weight based on track conditions. 🏁 Maintain your competitive edge with a fresh RC10B7 Gear Differential Set! 🔥 Upgrade today and ensure maximum performance and reliability from your Team Associated buggy! 🔥

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Ditch the slipper clutch and go direct! These Traxxas slipper eliminator plates are a must-have upgrade for TRX-4 builders looking to tighten up their drivetrain. ✅ Direct-drive performance✅ Ideal for custom TRX-4 setups✅ Includes 2 eliminator plates✅ Genuine Traxxas quality

Read more less

Traxxas Mod 0.8 TRX-4 Spur Gear (45T)Precision Replacement for Smooth Power Delivery Overview:This is a genuine Traxxas 45-Tooth Mod 0.8 Spur Gear, designed as a direct replacement for TRX-4 and TRX-6 platforms. Built for durability and smooth performance, it's ideal for keeping your crawler running strong on the trails. Features: 45-tooth Mod 0.8 pitch gear OEM fit and performance Durable composite construction Ideal for routine maintenance or gear ratio tuning Includes: (1) 45T Mod 0.8 Spur Gear Compatibility: Traxxas TRX-4 Traxxas TRX-6

Read more less

Upgrade your drivetrain with Traxxas 32P Heavy Duty Pinion Gears, built tough from hardened steel for maximum durability and long-lasting performance. Available in a range of tooth counts from 12T to 22T, these 32-pitch pinions are perfect for high-power setups and intense off-road action. 🔩 Precision-machined hardened steel🔩 Perfect for brushless power systems🔩 Includes set screw for secure installation🔩 Available sizes: 12T through 22T🔩 Fits 3mm motor shafts Includes: (1) Steel Pinion Gear (Choose Tooth Count) (1) Set Screw Part Numbers: 3942X–3952X (select by tooth count) Built for strength. Made for speed. Trusted by Traxxas.

Read more less

Traxxas Front Differential Ring & Pinion Gear Set (47T/12T) – Part #10778🔧 Smooth Power. Front-End Strength. Keep your front drivetrain running strong with this genuine Traxxas 47-tooth ring and 12-tooth pinion gear set. Designed specifically for the front differential, these gears ensure reliable power transfer and smooth performance—whether you're bashing, crawling, or racing. ✅ 47T ring gear / 12T pinion gear✅ For front planetary differentials✅ Precision-cut for smooth mesh and durability✅ OEM replacement for easy maintenance 📦 Includes: (1) 47-Tooth Differential Ring Gear (1) 12-Tooth Differential Pinion Gear  

Read more less

Traxxas X-Maxx Metal Gear Set – 2085 / 2085X Servos Part #: 2087X Upgrade or repair your Traxxas 2085 or 2085X servo with this heavy-duty metal gear set. Built to withstand the extreme torque and punishment dished out by the X-Maxx and other high-powered vehicles. ✅ Features: Precision hardened metal gears Designed for Traxxas 2085 and 2085X waterproof servos Increases durability and longevity over stock plastic gears Ideal for heavy-duty bashing and racing 📦 Includes: (1) Complete Metal Gear Set (1) Bearing Set Compatible with: Traxxas 2085 Servo Traxxas 2085X High-Torque Servo 🛡️ Keep your steering strong and reliable — even under max load. Perfect for serious X-Maxx owners and hard-core bashers!

Read more less

⚡ Lightweight Performance for Stock Racers – The Avid RC Triad Direct Drive eliminates the slipper assembly on your B7 for less rotating mass and zero slip (aside from the diff). At only 6.45g with a 72T spur (2.62g without spur), this is the lightest direct drive system on the market. ⚙️ Features:✅ Removes the entire clutch/slipper for reduced rotating mass✅ Lightest direct drive system available – just 6.45g w/ 72T spur✅ All-aluminum construction, including a custom M3x48 topshaft screw✅ Spur gear versatility – works with Avid Triad spur gears (spur not included)✅ Includes both 69T & 72T Triad spur gears✅ Clean install design with no loose screws to worry about 📦 Includes: (1) 69T Triad Spur Gear (1) 72T Triad Spur Gear (1) Direct Drive Aluminum Plate (1) M3x48 Aluminum Screw (1) Aluminum Hat Bushing (1) Aluminum Cone Washer (1) M3 Ringer Aluminum Nut 🔧 Compatibility: Team Associated B7 (installation same as B6.1 Triad Direct Drive) 💡 Pro Tip: Direct drive setups aren’t for everyone — but on stock classes and high-grip tracks, removing the slipper can give you a noticeable edge in efficiency and throttle response.  

Read more less

🌀 Stronger. Smoother. Smarter. Upgrade your Mini Maxx’s drivetrain with the Hot Racing Steel Helical Rear Ring & Pinion Gear Set. Precision-machined from high-carbon steel, this 39T/10T gear combo delivers smoother operation, quieter performance, and higher torque-handling than stock. The helical cut design distributes load more evenly—perfect for high-power setups and serious bashers. ✅ Helical spiral-cut = quieter + smoother power delivery✅ High-carbon steel for extreme durability✅ Handles more torque with fewer teeth✅ Drop-in upgrade for the Traxxas Mini Maxx (rear) 📦 Includes:• (1) 39T Steel Helical Rear Ring Gear• (1) 10T Steel Helical Rear Pinion Gear Tame the torque. Quiet the chaos. Dominate the trail.

Read more less

Upgrade your drivetrain with precision and strength. The Traxxas 20T Machined Mod 1.0 Pinion Gear is built for serious performance, featuring a 5mm bore and high-quality machined steel construction. Designed for the Traxxas E-Revo 2.0 and Maxx, this gear is ideal for high-torque brushless setups when paired with a steel spur gear. Features:• 20-tooth Mod 1.0 pitch• 5mm bore fits 1/8-scale motor shafts• Precision-machined steel construction• For use with steel spur gears only• Perfect for E-Revo 2.0 and Maxx Includes:• (1) 20T Machined Steel Pinion GearPart Number: 6494R

Read more less

Traxxas 25-Tooth Pinion Gear (32-Pitch, 3mm Bore) – Part #10842⚙️ Dial In Your Speed. Smooth, Efficient Power Delivery. Upgrade or fine-tune your drivetrain with this Traxxas 25T pinion gear. Built for 3mm motor shafts and compatible with 32-pitch setups, it delivers solid acceleration and balanced top-end speed. Perfect for dialing in gearing to match your terrain or driving style. ✅ 25-tooth pinion✅ 32-pitch gear profile✅ Fits 3mm motor shafts✅ Hardened for long-lasting performance✅ Includes set screw for secure installation 📦 Includes: (1) 25T Pinion Gear (32P, 3mm bore) (1) Set Screw  

Read more less

Traxxas TRX-4M Two-Speed Transmission Gears – Part #9876⚙️ Shift Your Adventure into High Gear. Upgrade your TRX-4M with selectable speed and torque! These Two-Speed Transmission Gears are designed for use with the optional #9891 transmission and allow you to switch between a low-speed crawl gear and a faster second gear. Perfect for those looking to add versatility and more scale realism to their 1/18 trail truck. ✅ Designed for the optional TRX-4M #9891 transmission✅ Adds selectable low and high gear functionality✅ Ideal for mixed terrain and trail versatility✅ Genuine Traxxas quality for smooth, reliable performance 📦 Includes: Two-Speed Transmission Gear Set (for use with #9891 transmission)  

Read more less

Traxxas 48P Pinion Gear (28T) – Part #4728⚙️ Precision Gearing. Balanced Performance. Dial in your drivetrain with the Traxxas 28-tooth 48-pitch pinion gear. Perfect for fine-tuning your RC’s performance, this hardened steel gear delivers smooth acceleration and balanced top-end speed when paired with an 83T spur gear. Whether you're racing or bashing, proper gearing can mean the difference between finishing strong or falling short. ✅ 48-pitch, 28-tooth steel pinion✅ Ideal for increasing speed while maintaining efficiency✅ Compatible with standard 3mm motor shafts✅ Perfect match with 83T spur gear for optimized gearing✅ Set screw included for secure installation 📦 Includes: (1) 28T 48P Pinion Gear (1) Set Screw 💡 Pro Tip: Want more torque and acceleration? Go with a smaller pinion. Want more top speed? Gear up with a larger pinion—just like this one!  

Read more less

Traxxas Metal Gear Set for 2065R Servo – Part 2064RRestore Precision. Reinforce Performance. The Traxxas 2064R Metal Gear Set is a direct replacement for the 2065R waterproof sub-micro servo. Whether you’ve stripped a gear or want to upgrade before failure, this set provides the toughness and precision your servo needs to perform under pressure. ✅ Fits Traxxas 2065R waterproof sub-micro servo✅ Hardened metal construction – durable and wear-resistant✅ Exact OEM replacements – restores like-new performance✅ Ideal for high-stress applications and harsh conditions✅ Great spare to keep in your toolbox 📦 Includes: (1) Complete Metal Gear Set for 2065R Servo Part #: 2064R 💡 Pro Tip: Replacing worn servo gears early helps prevent servo failure and protects your steering or shifting systems.

Read more less

Traxxas VXL Planetary Gear Differential – Part 2382Built Strong. Tuned for VXL Power. The Traxxas VXL Planetary Gear Differential is designed to handle the high output of brushless power systems. Featuring a steel ring gear for added strength, this complete kit is perfect for replacing or upgrading your existing diff on VXL-equipped vehicles. ✅ Heavy-duty steel ring gear – improved durability under brushless torque✅ Complete differential kit – all internal gears, shafts, and housing included✅ Smooth, consistent power delivery – ideal for high-speed bashing or racing✅ Designed for VXL models – fits most Traxxas 2WD platforms 📦 Includes Everything to Build One Differential: Differential housing Steel ring gear Planet gears & internal shafts Cross pins, output gears, & assembly hardware 🔩 Part #: 238 💡 Pro Tip: Use with high-quality diff grease for smoother operation and longer gear life.

Read more less

Team Associated RC10B7 Hinge Pin Set Part Number: ASC92496 Keep your suspension smooth and secure with the Team Associated RC10B7 Hinge Pin Set. This replacement set includes all necessary hinge pins for the RC10B7 platform, ensuring your vehicle maintains proper alignment and performance during high-stress racing conditions. ✅ Features: Direct replacement for the Team Associated RC10B7 Precision machined for smooth suspension operation Includes full set of hinge pins for the front and rear Durable construction for long-lasting performance 📦 Includes: (1) Complete hinge pin set for RC10B7 🚗 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

🛠️ Traxxas Steel Wide-Face Mod 1.0 Spur Gear (46T / 50T / 54T) — Heavy-Duty Performance! Upgrade your drivetrain with Traxxas Steel Wide-Face Spur Gears, available in 46T, 50T, or 54T tooth options. Designed for maximum durability and load handling, these heavy-duty steel gears are perfect for high-torque setups, big power, and extreme bashing. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔩 Why Choose Steel? ✅ Wider face for increased tooth engagement ✅ Hardened steel construction for ultimate durability ✅ Perfect for high power brushless systems and intense terrain 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Best for short, technical tracks or heavy loads Smaller Spur (Lower T) 🔹 Smoother, slower take-off 🔹 More top speed 🔹 Ideal for open tracks and speed runs ✅ Compatible With: Traxxas Maxx Traxxas X-Maxx Traxxas XRT 📦 Includes: (1) Traxxas Steel Wide-Face Spur Gear in your selected size (46T, 50T, or 54T) 🌀 Need extreme strength and tuning flexibility? Steel is the way to go. Gear up your Maxx, X-Maxx, or XRT for whatever the track throws your way!

Read more less

Traxxas Mod 1.0 Spur Gear (46T / 50T / 54T) — Fine Tune Your Gearing! Dial in the performance of your Traxxas vehicle with precision using Mod 1.0 Spur Gears! Available in 46T, 50T, or 54T, these gears let you adjust acceleration, torque, and top speed to perfectly match your terrain or driving style. Whether you're racing for top speed or need explosive off-the-line acceleration, there's a gear for that. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Great for small tracks & tight turns 🔹 Combine with larger pinion for torque Smaller Spur (Lower T) 🔹 Smoother acceleration 🔹 Higher top speed 🔹 Ideal for wide-open tracks ✅ Compatible With: Traxxas XO-1 Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx 📦 Includes: (1) Traxxas Mod 1.0 Spur Gear in your selected tooth count (46T, 50T, or 54T) 🌀 Fine tune your setup for every terrain — whether you're chasing laps or launching jumps, pick the spur that puts you in the lead!

Read more less

Arrma Mod 0.5 Pinion Gear (3.2mm Bore) – Multiple Tooth Options 🔧 Fine-Tune Your Gear Ratio with Precision! Upgrade or maintain your Arrma 1/14 Typhon Grom 223S or 1/16 Mojave Grom 223S with the Arrma Mod 0.5 Pinion Gear. Designed for smooth and efficient power transfer, this hardened steel pinion delivers the durability and reliability needed for high-speed runs and tough off-road conditions. 🛠 Features:✔️ Durable Steel Construction – Built for long-lasting performance✔️ 3.2mm Bore – Ensures a secure fit on compatible motor shafts✔️ Smooth Power Transfer – Optimized for efficiency and reliability✔️ Easy Installation – Quick setup with the included 3x4mm set screw✔️ Multiple Tooth Options – Choose the right gear for your performance needs! 📦 Includes: (1) Mod 0.5 Pinion Gear (Choose from 16T–31T) (1) 3x4mm Set Screw ⚙️ Compatibility:✅ Arrma Mojave Grom 223S✅ Arrma Typhon Grom 223S 🔩 Optimize Your Gear Ratio & Performance Today!

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

Upgrade your drivetrain with the Hot Racing 48P Hardened Steel Spur Gear. Designed for strength and precision, this 86-tooth gear is the perfect replacement for stock plastic gears, giving your Traxxas 2WD vehicle improved durability and smoother performance. Whether you’re racing or bashing, this spur gear keeps you running strong under extreme conditions. Features: 48 pitch, 86-tooth spur gear CNC-machined from hardened steel for maximum durability Direct fit upgrade for Traxxas 2WD models Precision-cut teeth for smooth and efficient power transfer Ideal for high-power brushless setups Includes:(1) 86T 48P Hardened Steel Spur Gear Compatibility: Traxxas 2WD models including Slash 2WD, Rustler, Stampede, and Bandit  

Read more less

UpGrade RC "Black Lightning" Rubber Sealed Bearing Kit for Traxxas® TRX-4M™📦 Part #: UPG-17014💥 Boost performance. Seal out the grime. Upgrade your TRX-4M with the UpGrade RC “Black Lightning” Bearing Kit—built to handle the roughest terrain and keep your rig rolling smoothly. Featuring rubber-sealed bearings, this kit offers enhanced protection from dirt, dust, and moisture, meaning less maintenance, more drive time, and longer-lasting performance. 🛠️ Key Features: ✅ Rubber Seals: Keep out water, grime, and contaminants ✅ Smooth & Quiet Operation: Reduced friction for better performance ✅ High Durability: Less wear = longer life ✅ Corrosion Resistant: Run hard in any environment ✅ Precision Fit: Designed specifically for TRX-4M platforms 🔧 Includes (22 Bearings Total): (2) 8x12x3.5mm (4) 5x8x2.5mm (4) 4x8x3mm (4) 3.5x7x2.5mm (8) 3x6x2.5mm 💡 Note: Always verify your model’s bearing sizes in your manual, especially if you’ve installed hop-ups or own a different production version. 🚀 Built for performance. Sealed for protection.The Black Lightning series delivers the smooth power transfer and reliability you need—on the rocks or off the grid.  

Read more less

Perfect for High-Power Drag Racing Builds📦 Part #: Choose 20T–40T Take your drag racing setup to the next level with the ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear. These pinions are specifically engineered for high-RPM 4-pole motors with 5.0mm shafts, making them ideal for no-prep and straight-line drag applications. Precision-cut for smooth 48 pitch mesh, they're built to deliver maximum efficiency and faster acceleration by reducing rotational mass. 🔧 Key Features: Pitch: 48P (Perfect for drag and speed builds) Bore Size: 5.0mm – fits large shaft 4-pole motors Material: Lightweight aluminum for reduced rotating mass Finish: Hard anodized for durability under high stress Etched Tooth Count: Easy size identification Performance: Quick spool-up, consistent gear mesh, and reliable grip under load 🏁 Why It Matters: Less mass = faster response. Whether you're trying to shave tenths off your ET or just want smoother power delivery, these ProTek pinions give your build the edge where it counts. 👉 Choose from 20T to 40T to dial in your exact gearing needs! Note: Compatible with 48 pitch spur gears and motors that use 5mm output shafts. Always double-check mesh and gear clearance during install.

Read more less

Replacement Gears for Portal-Equipped Rigs Keep your TRX-4M or TRX-4MT running smooth with this genuine Rear Portal Drive Gear Set. Designed specifically for use with the optional portal axles (#9843R), this set includes all three replacement gears needed to restore performance and durability in the rear axle. Features:• Replacement gear set for rear portal axles• Compatible with TRX-4M and TRX-4MT models• Designed for use with optional portal axles (#9843R)• High-strength metal construction Includes:• (3) Rear Portal Drive GearsPart Number: 9878 Stay geared up and trail-ready with tough, reliable Traxxas components.  

Read more less