JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are engineered for carpet and turf racing, offering exceptional traction, stability, and durability. Designed with radius-positioned pins and a low-profile carcass, these tires provide quick transitions, minimal side-wall deflection, and maximum grip on high-traction surfaces. Pre-mounted on JCO3348 Mono wheels and featuring plush open-cell inserts, they are race-ready straight out of the package. Features: ✔️ Pre-mounted for quick and hassle-free installation✔️ Low-profile carcass for reduced side-wall flex and quicker response✔️ Reverse “water tower” pin shape for enhanced grip and control✔️ Radius-positioned pin arrangement for maximum surface contact✔️ Directional sidewall lugging for precise cornering and acceleration✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Plush open-cell inserts included for added control and stability✔️ Mounted on JCO3348 Mono wheels in white or fluorescent yellow In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Tires (Pink Compound)📦 (2) JCO3348 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" Rear Buggy Wheels✅ Standard 12mm Hex Fitment

Read more less

  JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires (White OR Yellow) (2) (Pink) (Carpet) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires are engineered for carpet and turf racing, delivering precision steering, exceptional grip, and quick responsiveness. Built on a super low-profile carcass, these tires reduce side-wall deflection and roll for maximum consistency at high speeds. Mounted on JCO3376 Mono wheels (white or fluorescent yellow), and assembled without inserts, they’re ready to hit the track right out of the package. Features: ✔️ Pre-mounted for quick and consistent installation✔️ Super low-profile carcass for stability and quick transitions✔️ Reverse “water tower” pin design for precise and deep carpet traction✔️ Radius-positioned pin layout for consistent grip and wear✔️ Alternating pin rows for increased steering and side-bite✔️ Directional sidewall lugging for added mid-corner grip✔️ Scalloped tire beads reduce unsprung weight✔️ Mounted on JCO3376 Mono wheels (White or Yellow) In The Box: 📦 (2) Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires (Pink Compound)📦 (2) JCO3376 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 2WD Front Buggy Wheels✅ 12mm Hex

Read more less

  ProTek RC 48P Lightweight Aluminum Pinion Gear (13T–38T)⚙️ Hard Anodized | Lightweight | 3.17mm Bore The ProTek RC 48 Pitch Lightweight Aluminum Pinion Gear is engineered for serious racers looking to reduce rotating mass and increase throttle response. These precision-cut gears are CNC-machined from high-quality 7075-T6 aluminum and hard anodized for exceptional durability and performance. Ideal for off-road and on-road applications using 48 pitch gears, they feature laser-etched tooth counts for quick identification and a lightweight design that promotes quicker motor spool-up and improved acceleration. 🔧 Features: 48 pitch Available in 13T–38T sizes CNC-machined 7075-T6 aluminum Hard anodized for strength and wear resistance Lightweight design with additional machining on 18T and larger Tooth count laser-etched for easy ID Includes set screw for secure mounting 3.17mm (1/8") motor shaft bore 🚀 Optimize your drivetrain with reduced rotational mass and faster response out of corners! 🧩 Includes: (1) Pinion Gear (select size from dropdown) (1) Set Screw

Read more less

Battery, Power Cell AA Alkaline (4)

Read more less

ProTek R/C CA Tire Glue – Medium Viscosity (0.75oz) Fast, Reliable Bonds for R/C Tires and More ProTek R/C CA Tire Glue delivers high-performance bonding in a compact bottle. With a medium viscosity and a 5–10 minute dry time, it's perfect for securing rubber tires to plastic R/C wheels — and works great on nearly any material. 🧪 Features: ✅ Medium Viscosity – Ideal balance for controlled flow and penetration ✅ 5–10 Minute Dry Time – Workable and fast-setting ✅ Versatile Bonding – Great for rubber, plastic, and more ✅ Compact 0.75oz Bottle – Fits easily in your toolbox or pit bag ✅ Includes Glue Tip – (Additional tips available: PTK-1571) ⚠️ Note: ❌ Not foam safe 🧊 Store in a cool, dry environment for best shelf life Whether you're mounting tires or tackling repairs at the track, ProTek CA Glue gets the job done with strong, dependable results.

Read more less

🔧 Boof RC Aluminum 30x30x10mm Fan for ESC & Motor (Purple, Red, Blue, or Gold) The Boof RC 30x30x10mm Aluminum Fan is a compact, high-RPM cooling solution designed to keep your ESC or motor running cool under extreme conditions. Whether you're bashing, crawling, or racing, this fan helps prevent overheating and ensures consistent performance. Crafted with a durable aluminum housing and finished in vibrant anodized colors, this fan delivers both performance and style. ✅ Features: 30x30x10mm size fits most ESC and motor setups High-speed design for efficient cooling CNC-machined aluminum housing for strength and heat dissipation Works with both ESCs and motors Available in Purple, Red, Blue, or Gold BOOF RC sticker included!

Read more less

⚙️ Team Associated Octalock 48P Spur Gear (72T–87T) Precision. Performance. Proven. Upgrade your drivetrain with the Team Associated Octalock 48 Pitch Spur Gear, designed for smooth, efficient power delivery in competitive RC racing. Compatible with Team Associated’s Octalock slipper pads, this gear ensures consistent engagement and improved durability under high-stress conditions. Perfect for fine-tuning your gearing setup, the Octalock spur gears are available in a range of tooth counts from 72T to 87T, allowing racers to dial in their ideal gear ratio for track conditions. 🔩 Features: 🔧 Octalock Pad Compatibility – Designed to pair with Octalock slipper pads for secure engagement 🏁 Precision Molded – Lightweight and durable plastic construction ⚙️ 48 Pitch (48P) – Ideal for 1/10 scale competition vehicles 🔢 Available in Multiple Sizes – Choose from 72T to 87T for perfect gearing customization 📦 Includes: (1) Team Associated Octalock 48P Spur Gear (select tooth count) 📌 Note: Make sure to select the correct tooth count for your application when adding to cart. Boost your setup with race-proven gear precision—Octalock it down

Read more less

Body Clips 10 pcs set Black

Read more less

JConcepts Mono 2.2" "Slim" Front Wheels (Yellow, 4pcs) – 12mm Hex Overview:The JConcepts Mono 2.2" Slim Front Wheels are precision-designed for narrow front tires commonly used in carpet and Astroturf racing. Molded from durable high-impact material, these lightweight wheels offer a clean dish-style design with functional features that racers demand. The shallow 12mm hex design ensures quick, clean installs across a wide variety of 2WD buggy platforms. Whether you're mounting up on a Team Associated B6, Yokomo YZ-2, or Kyosho RB6, these wheels offer an ideal fit for tight indoor racing conditions. Each pack includes four wheels, available in fluorescent yellow for high visibility and style. Features: Slim width for narrow tire applications (carpet/Astro) Lightweight, one-piece construction Popular dish styling with vent holes Outer glue catch for cleaner tire mounting Polished face with embossed JC logo Pack of 4 wheels Available in bright white or fluorescent yellow Compatibility Includes (but not limited to): ✅ Team Associated: B7, B7D, B6, B6.1, B6.1D, B6.2, B6.2D, B5, B5M, B4 series✅ Kyosho: RB5, RB6, RB7✅ Schumacher: Cougar KF2, KF2 SE, KD, KC, LD3✅ Yokomo: YZ-2 CAL, CAL2, CAL3, DTM, DTM WC, DTM2, DTM3✅ Serpent: SRX-2 MM, RM✅ XRAY: XB2 (2017–2019 Carpet/Dirt editions)

Read more less

Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

Team Associated RC10B6 Factory Team Carbon Front Suspension "Gullwing" Arms [91872] 🦅 Fly through corners with precision! Upgrade your front end with Factory Team Carbon Gullwing Arms for your RC10B6! Designed with carbon fiber construction, these arms are lighter, stiffer, and stronger—giving you the edge when the track gets tough and traction is high. ✅ 12% lighter than "hard" material✅ Better cornering in high-grip conditions✅ More consistent handling and stability✅ Extreme strength and durability Includes:(2) Carbon Front Suspension Gullwing Arms 📦 Part Number: 91872🏁 Brand: Team Associated

Read more less

Traxxas EZ-Peak Dual 3S Completer Pack (5000mAh x2, 11.1V) w/iD ChargerTwo Batteries. One Powerful Charger. All the Performance. Completer Pack Overview:The Traxxas EZ-Peak 3S Completer Pack is the perfect solution for vehicles that require dual 3S LiPo batteries—like the X-Maxx and XO-1—or for drivers who just want double the runtime. With two 5000mAh 11.1V Power Cell LiPos and the EZ-Peak Dual 100W Charger, you get fast, safe charging with Traxxas iD® technology and power that doesn’t quit. Why You’ll Love It: iD® Auto Battery Detection: Just plug it in. No setup, no fuss. Charges two batteries simultaneously—even mixed chemistries (LiPo + NiMH). 100W output delivers up to 8A per channel for high-speed charging. Compatible with legacy Traxxas High-Current Connectors (Advanced Mode). Durable, compact design with built-in balance ports for older LiPos. Battery Specs (TRA2872X): Type: LiPo Configuration: 3S (11.1V) Capacity: 5000mAh Continuous Discharge: 25C (125A) Burst Rate: 50C (250A) Max Charge Rate: 2C (10A) Dimensions: 155 x 26 x 44mm Weight: 13.3oz (376g) Charger Specs (TRA2972): Output Power: 100W Charge Current: 1A–8A Battery Types: 2–3S LiPo / 5–8 Cell NiMH AC Input: 100–240V Dimensions: 176 x 138 x 57mm Net Weight: 575g In the Box:✔ (1) Traxxas EZ-Peak® Dual 100W iD® Charger✔ (2) Traxxas 3S 5000mAh 25C LiPo Batteries w/iD® Connectors IMPORTANT:⚠️ For safety, only charge these batteries with Traxxas iD-equipped chargers.⚠️ Never leave charging batteries unattended. Always follow LiPo safety practices.

Read more less

Boof RC 5mm Heatsink Bullet Connectors (2)🔥 Cool Under Pressure. Built to Perform. The Boof RC 5mm Heatsink Bullets are designed to handle serious amps while keeping temps in check. With integrated heatsink fins machined into each bullet, these connectors improve heat dissipation, allowing for longer, more efficient runs. Whether you’re building a competition-grade power system or upgrading your basher, these bullets deliver both function and form. ✅ 5mm bullet connectors with integrated heatsink fins✅ Improved thermal performance under high loads✅ Precision-machined for secure fitment✅ Ideal for motors, batteries, and ESC connections✅ Sleek anodized finish 📦 Includes:(2) Boof RC 5mm Heatsink Bullets 💡 Boof Tip: Use with high-performance ESCs or motors where heat can rob you of power—these bullets fight back.

Read more less

JConcepts Fuzz Bite LP Carpet 2.2" 2WD Front Buggy Tires (2) (Pink) 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" 2WD Front Buggy Tires are high-performance pin tires built for carpet and turf racing. With a low-profile carcass, precision pin design, and optimized radius layout, these tires deliver fast transitions, increased side-bite, and excellent forward traction on high-grip surfaces. Features: ✔️ Low-profile carcass for reduced roll and quicker steering response✔️ Reverse “water tower” pin design for enhanced grip and precision✔️ Radius-positioned pin layout for maximum surface contact✔️ Alternating pin rows for optimal side-bite and traction✔️ Radial rib & angular cross tread for consistent cornering and mid-corner launch✔️ Ultra-lightweight scalloped tire beads for reduced rotating mass In The Box: 📦 (2) Fuzz Bite LP 2.2" 2WD Front Buggy Tires (Pink Compound) Compatibility: ✅ Fits 2.2" 2WD Front Buggy Wheels

Read more less

🔩 BOOF RC 48P Aluminum Pinion Gear (16T–40T) This is a BOOF RC 48 Pitch Lightweight Aluminum Pinion Gear — precision-engineered for off-road applications where quicker motor spool-up and acceleration make all the difference. CNC-machined from aluminum and hard anodized for strength, these gears are built to deliver smooth, consistent power. Gears 16T and larger feature weight-reducing cuts on the back side, maximizing performance without compromising durability. Each gear includes a setscrew for easy installation. 💡 Choose your tooth count from the menu above. ✅ Features: 48 Pitch, perfect for a wide range of off-road vehicles Available in 16T to 40T sizes Lightweight, hard-anodized aluminum construction Machined for precision and durability Reduced rotating mass = faster acceleration Includes setscrew BOOF RC sticker included

Read more less

  Keep your TRX-4M running strong with this genuine Traxxas 2S LiPo battery! Compact, lightweight, and built for performance, it delivers consistent 7.4V power and 750mAh capacity with a 20C discharge rate—perfect for extended crawling adventures. ✅ Capacity: 750mAh✅ Voltage: 7.4V (2S)✅ Discharge Rate: 20C✅ Connector: Traxxas High-Current✅ Compatible With: TRX-4M Engineered by Traxxas for optimal runtime, reliability, and fit in your TRX-4M.

Read more less

This is the ProTek R/C Pit Mat. The ProTek R/C pit mat will take your work space from suitable, to stunning. With a 24 x 48 footprint and nearly 8 square feet of coverage, this mat is the perfect size for your work space. Made from durable 4mm thick foam material, this mat is easy to clean, roll up and store away. Plus, unlike other pit mats, the ProTek R/C Pit Mat includes a closeable mesh carry bag that makes it easy to throw the mat over your shoulder and haul around. Ditch the dirty towels and silly rubber mats, and start wrenching like a boss with this high quality mat from ProTek R/C. Features: Approximately 24 x 48 in. (60 x 120 cm) Textured surface helps to prevent parts rolling onto the floor 4mm thick padded material provides clean, flat, anti-fatigue surface Closeable, mesh bag makes for easy storage and transportation. Eye-catching ProTek R/C Styling!

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

🔋 Traxxas EZ-Peak 2S Single Completer Pack (Charger + 5800mAh LiPo) Looking to power up your Traxxas vehicle the easy way? The EZ-Peak Completer Pack includes the trusted Traxxas EZ-Peak Plus iD Charger and a powerful 5800mAh 2S 25C LiPo battery — perfect for most 2S-compatible Traxxas RTR models. 💡 No complicated setup. Just plug in and go! ⚡ What's Inside: (1) Traxxas EZ-Peak Plus Charger (TRA2970) (1) 5800mAh 2S 25C LiPo Battery w/iD (TRA2843X) 🔌 Charger Features: iD Auto Battery Recognition for safe, easy charging Charges 2S–3S LiPo or 5–8 cell NiMH batteries Up to 4A fast charging (40W Max) Built-in balance ports — no balance boards needed Storage Mode to extend battery life Compact and reliable with AC power input 📐 Charger Specs: Input: 100–240V AC Output: 1.0–4.0A (40W Max) Dimensions: 146 x 123 x 53mm Weight: 365g 🔋 Battery Specs (TRA2843X): Type: 2S LiPo Capacity: 5800mAh Continuous Discharge: 25C (145A) Max Burst Rate: 50C (290A) Voltage: 7.4V Dimensions: 137 x 25 x 43mm Weight: 308g iD-equipped for use with Traxxas iD chargers ✅ Perfect For:Anyone who needs a complete 2S battery and charging solution for their Traxxas vehicle — especially for models like the Slash, Rustler, Bandit, Stampede, and more.

Read more less

Oil, shock (50 wt, 600 cSt, 60cc) (silicone)

Read more less

Traxxas ProGraphix® R/C Body Paint – 5 oz or 13.5 oz Aerosol (Multiple Colors Available) Traxxas ProGraphix® Custom R/C Paints deliver professional-grade, airbrush-like results with the ease and convenience of aerosol spray cans. Whether you’re painting a new body or freshening up a favorite, ProGraphix gives you bold color, clean coverage, and long-lasting results. ProGraphix® Paint Features: Huge variety of custom colors Available in 5 oz and 13.5 oz sizes Smooth, ultra-fine spray pattern Fast-drying formula Clog-resistant comfort nozzle Resistant to nitro fuel Formulated for polycarbonate (Lexan®) bodies 🎨 For best results, follow instructions on the can. Results may vary depending on surface prep, application, and backing colors. ⚠️ DANGER: Extremely flammable liquid and vapor. Keep out of reach of children.⚠️ CALIFORNIA PROP 65 WARNING: Contains chemicals known to cause cancer and birth defects. Learn more

Read more less

Team Associated FT Aluminum Clamping Servo Horn – 25T / 15.5mm – Part 1370Compact. Strong. Precision Steering. The Team Associated Factory Team 15.5mm Clamping Servo Horn (1370) is a lightweight, high-strength upgrade for 25T spline servos from Futaba, Savox, ProTek, and others. Designed for tighter builds or where quicker steering response is needed, this 15.5mm horn provides durable performance with reduced leverage for smoother control and less servo wear. ✅ Machined 7075 T6 aluminum – rigid and race-ready✅ Short 15.5mm length – for reduced load and quicker response✅ Clamping-style mount – added security and reduced play✅ Laser-etched spline marking – easy identification✅ Fits 25T spline servos – Futaba, Savox, ProTek, Reedy, and more 📦 Includes: (1) 15.5mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1370 💡 Pro Tip: Great choice for 1/10 scale buggies, touring cars, or any build where space is limited and servo precision matters.

Read more less

🔥 JConcepts Swaggers 2.2" Carpet Truck Front Tires (Pink) – PairDial In Your Front End for Precision Carpet Control! 🏁 Designed for the demands of high-traction carpet and astro turf racing, the JConcepts Swaggers 2.2" Truck Tires offer unmatched cornering consistency, straight-line tracking, and smooth response. With offset angular ribs and a low-profile carcass, these front tires help maintain control under pressure—making your stadium truck faster and easier to drive on aggressive race surfaces. ✨ Key Features: ✅ Precision-Molded for JConcepts 2.2” Truck Wheels (JCO3354W or JCO3354Y) 🌀 Offset Angular Rib Design – Optimized for corner speed and straight-line tracking 🔧 Low-Profile Carcass – Improves steering feel and stability on high-grip tracks 🛞 Sidewall Support Ribs – Enhance consistency during aggressive cornering 🟣 Pink Compound – Medium-soft rubber with excellent grip and wear balance 🧩 Open Cell Foam Inserts – Included for optimal tire performance across conditions 📦 Includes: (2) JConcepts Swaggers 2.2" Truck Front Tires (Pink Compound) (2) Open Cell Inserts 🧩 Compatibility: Fits most 1/10 stadium trucks using 2.2" truck wheels Recommended for use with JConcepts wheels: JCO3354W (White) or JCO3354Y (Yellow) 💨 Steer sharp. Stay locked in. Race like a pro with JConcepts Swaggers!

Read more less

Oil, shock (40 wt, 500 cSt, 60cc) (silicone)

Read more less

⚡ Unleash the Full Potential of Your Traxxas Ride This Traxxas 2S 5000mAh LiPo battery with iD connector is built to deliver powerful punch and extended run time for your favorite Traxxas vehicles. Designed for maximum performance, this 25C battery gives you the acceleration, speed, and reliability you demand — all with the convenience of the Traxxas iD system for easy, foolproof charging. 🔋 Battery Specs: Type: LiPo Capacity: 5000mAh Voltage: 7.4V (2S) Discharge Rate: 25C Length: 137mm Width: 43mm Height: 24mm Weight: 9.9oz ✅ Features: Certified Traxxas iD-equipped for safe, easy charging Engineered for high performance and extended run time Fits Traxxas models perfectly — no modifications needed Delivers the power needed for peak speed and acceleration

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks – ASC91901🛞 Precision Steering Just Got an Upgrade Fine-tune your front-end handling with the Team Associated -1mm Scrub Caster & Steering Block set for the RC10B6.4 and B6.4D! Whether you're chasing max steering feel or dialing in a tighter line through corners, this kit delivers the flexibility you need. The included caster inserts let you tweak your setup in seconds, giving you full control over how your buggy handles on any track. ✅ Designed specifically for B6.4 and B6.4D✅ Adjustable camber with multiple caster insert options✅ Lightweight and durable AE factory-grade components✅ Great for high-traction tuning or steering sensitivity adjustments 📦 Includes:• (2) Caster Blocks• (4) Steering Blocks• (2) +/- 0° Caster Inserts• (2) +/- 2.5° Caster Inserts• (2) +/- 5° Caster Inserts• (2) Shims 🔢 Part Number: ASC91901🏁 Brand: Team Associated

Read more less

Precision Bonding for High-Performance Tires The Team Losi Racing Thin Tire Glue is the go-to choice for RC racers and hobbyists who demand strong, reliable tire bonds. Designed with a thin viscosity for quick penetration, this CA glue creates a secure, long-lasting hold — ensuring your tires stay locked in place even under high-speed runs and intense bashing sessions. Perfect for on-road, off-road, and crawler tires, this 1oz bottle offers plenty of glue for multiple applications, making it an essential tool for your RC kit. ⚡ Key Features: ✅ Thin Viscosity CA Glue — fast-setting for deep penetration and strong bonds.✅ Ideal for Tire Gluing — perfect for foam, rubber, and RC wheel materials.✅ 1oz Bottle — enough for multiple tire sets.✅ Quick-Drying Formula — reduces wait time so you can hit the track faster.✅ Reliable Hold — designed to handle high speeds, jumps, and hard turns. 📏 Specifications: 🔹 Type: Thin Viscosity CA Glue🔹 Size: 1oz (28.3g)🔹 Use: Tire Gluing Applications 💡 Pro Tip: For best results, clean tire beads and rims before applying glue, and use a tire gluing jig for added precision.

Read more less

Power up your ride with serious runtime and punch! The Traxxas Power Cell 7600mAh 2S LiPo delivers high-capacity performance with rugged construction and easy plug-and-go charging through the Traxxas iD system. 🔋 7.4V / 7600mAh / 25C Continuous🔌 iD Connector for safe, simple charging🔥 Max Burst Rate: 50C (380A)⚡ Maxx Cable 12AWG wiring for low resistance🏁 Optimized fit for Traxxas models like Slash & Slash 4x4💡 Semi-rigid construction – no hard case needed Dimensions: 155x27x43mmWeight: 390g ⚠️ Note: Must be charged with a Traxxas iD charger only. The go-to battery for racers and bashers who want dependable power, long runtimes, and Traxxas factory fit and finish.  

Read more less

  Engineered for high-grip carpet and turf tracks, the JConcepts Fuzz Bite LP rear tires bring next-level precision and traction. With a low-profile carcass and reverse "water tower" pin design, these tires offer lightning-quick transitions and maximum grip without sacrificing longevity. Radius-positioned pins and directional lugging create consistent cornering and explosive forward bite. 💥 Open cell inserts included. Features:• Low-profile carcass for reduced sidewall roll• Reverse "water tower" pin shape for precision grip• Radius-positioned pin layout for optimized bite• Lightweight scalloped tire beads reduce rotational mass• Plush open cell inserts included

Read more less

Traxxas 4mm Aluminum Flanged Serrated Locknuts (4-Pack) Part #: 1747G / 1747R / 1747T / 1747A / 1747PAvailable Colors: Green, Red, Blue, Black, Purple Add both function and flair to your RC build with Traxxas Aluminum 4mm Flanged Locknuts! These serrated, anodized locknuts offer a lightweight, high-strength upgrade that resists loosening from vibration—perfect for racers and bashers alike. 📦 Includes: (4) 4mm Aluminum Flanged Serrated Locknuts (choose color) ✅ Features: CNC-machined from lightweight 6061-T6 aluminum Anodized finish for brilliant color and corrosion resistance Serrated flange helps grip plastic or metal surfaces securely Adds a high-performance, custom look to your RC rig Fits standard 4mm threaded axles and components Compatible with most Traxxas 1/10 scale vehicles 🎨 Dress up your build and lock in performance—available in multiple colors to match your style!

Read more less

Upgrade or replace your buggy’s diff with the Team Associated B6.1/B6.1D Gear Differential Kit — engineered for smooth, consistent power delivery and long-lasting performance. Features: Complete kit with all parts needed to build one high-quality gear differential Designed for precision fit and smooth operation in B6.1 and B6.1D models Durable materials built to withstand competitive racing demands Includes: All gears, seals, outdrives, and hardware for one complete gear diff Perfect for racers looking for reliable performance and tunability on any surface. Team Associated RC10B6.3Team Associated RC10B6.3DTeam Associated RC10B6D

Read more less

JConcepts Pin Swag 2WD Front – Pink Compound – Pre-Mounted on 3376 Wheels (White or Yellow)Precision Steering Meets Turf Domination! 💥 The JConcepts Pin Swag Front Tires bring aggressive traction and pinpoint control to 2WD buggies on high-grip carpet and turf. Pre-mounted on 3376 wheels and glued for out-of-the-box performance, these tires combine the proven Swagger outer lug design with a dense pin layout for unmatched front-end steering. ✨ Key Features: ✅ Pre-Mounted for Convenience – Glued and ready to race! 🔧 Pink Compound – Soft, high-traction rubber optimized for carpet & turf 🛞 Pin x Swag Hybrid Tread – Swagger-style outer lugs + crisp center pins for bite and balance 💡 Ultra-Light Scalloped Bead Design – Reduces rotating mass for faster response 🌀 Low-Profile Carcass – Faster cornering, better transition through chicanes and jumps 🎨 Available in Bright White or Fluorescent Yellow wheels 🧩 Compatibility: Fits 2WD front buggies using JConcepts 3376 wheels 📦 Includes: (2) Pre-mounted JConcepts Pin Swag Front Tires – Pink Compound (2) JConcepts 3376 Wheels (choose white or yellow) ⚠️ Note: Sold as a pair. Please verify fitment with your buggy’s wheel requirements. 🏁 Take control of the corners and push the pace with the aggressive precision of JConcepts Pin Swags!

Read more less

Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Oil, shock (60 wt, 700 cSt, 60cc) (silicone)

Read more less