Push your Traxxas vehicle to the next level with the VXL-3S Waterproof Electronic Speed Control. Built for pure performance, this ESC is 3S LiPo-capable and designed to handle extreme brushless power with ease. With smooth throttle response, thermal protection, and Traxxas’ legendary waterproofing, you’ll have the confidence to drive flat-out in dirt, snow, mud, or water. Features: Waterproof design for all-weather, all-terrain driving 3S LiPo compatible – unleash 50+ mph speeds in many Traxxas models Optimized for the Velineon brushless motor line Built-in low-voltage detection for LiPo batteries Thermal protection circuitry for reliable performance EZ-Set® push-button setup and programming Includes: (1) Traxxas Velineon VXL-3S Waterproof ESC Compatibility:Direct replacement ESC for many Traxxas brushless-ready vehicles, including Rustler VXL, Bandit VXL, Stampede VXL, and Slash VXL.

Read more less

Keep your drivetrain smooth and reliable with the Traxxas Rear Differential Ring and Pinion Gear Set. Designed for the Mini Maxx and Mini XRT, this set includes the 47-tooth ring gear and 12-tooth input pinion gear to restore differential performance. ✅ Direct Replacement – OEM fit for Mini Maxx and Mini XRT rear differential✅ Durable Construction – Built to handle high torque and hard bashing✅ Complete Set – Includes both ring gear and input pinion gear✅ Note: Pinion gear is not compatible with optional center differential or slipper clutch Includes: (1) 47T Ring Gear (1) 12T Input Pinion Gear Compatibility: Traxxas Mini Maxx Traxxas Mini XRT Restore smooth, efficient power transfer with the Traxxas 10779 Ring & Pinion Gear Set — tough enough for extreme 1/10 monster truck action.  

Read more less

⚙️ Precision bearings for smooth, efficient performance. Keep your drivetrain rolling at peak efficiency with Traxxas 10x15x4mm Ball Bearings. Available in two versions — black-sealed and blue-sealed — both deliver the precision fit and durability you expect from genuine Traxxas parts, with slight differences in seal type and intended usage. 🔹 Blue-Sealed [5119] Rubber-sealed design for better dirt and moisture resistance Ideal for off-road or wet-condition running Slightly more seal drag, but greater protection in harsh environments ⚫ Black-Sealed [5119A] Tighter seal for reduced debris ingress, but optimized for lower rolling resistance Suitable for high-speed on-road or clean-condition running Minimal seal friction for smoother free-spinning performance 🛠 Which to Choose? Seal Color Best For Strengths Trade-Offs Blue (5119) Off-road, wet/muddy terrain Excellent dirt/water sealing Slightly higher rolling resistance Black (5119A) On-road, dry/clean conditions Lower friction, smoother spin Less protection in harsh conditions ✅ Precision 10x15x4mm size✅ Durable steel construction✅ Direct fit for multiple Traxxas models✅ Improves efficiency & reduces wear 📦 Includes:• (2) Ball Bearings per pack – choose Blue 5119 or Black 5119A  

Read more less

Traxxas Maxx Duty Driveshaft Assembly – Part 8950Tough Enough for Maxx Power. Ready for Action. The Traxxas Maxx Driveshaft Assembly (8950) is a direct replacement for the Maxx 1/10 Brushless 4WD Monster Truck, designed to handle brutal brushless torque and aggressive off-road abuse. Use it in the front or rear to restore performance or keep it on hand as a critical spare. ✅ Maxx-duty design – stronger than stock driveshafts✅ Fully assembled and ready to install✅ Fits front or rear position✅ Perfect for brushless setups and hard-driving conditions✅ Includes screw pin for secure mounting 📦 Includes: (1) Maxx Duty Driveshaft Assembly (Front or Rear) (1) Screw Pin Part #: 8950 💡 Pro Tip: Keep one in your pit box — a snapped driveshaft can end a bash session early.

Read more less

Traxxas 12mm Steel Wheel Hex Hubs (2) Part #: 1654R | Heavy-Duty Steel Hex Set Upgrade your drivetrain with the Traxxas 1654R 12mm Steel Hex Hubs. Designed for extra durability, these steel hexes provide a stronger and longer-lasting connection between your wheels and axles—perfect for high-power applications and rough terrain. A direct upgrade from standard plastic hexes. 📦 Includes: (2) Steel 12mm Hex Wheel Hubs (2) Axle Pins ✅ Features: Machined steel construction for maximum strength 12mm hex size fits most Traxxas 1/10 scale models Helps prevent hex stripping under high torque Great for Slash, Rustler, Stampede, and more. Always check your manual to verify fitment.

Read more less

Traxxas 3000mAh 7.4V 2-Cell LiPo Battery w/ iD® Connector (Part #2827X) 🔋Compact 2S Power for Lightweight Performance The Traxxas 3000mAh 2S LiPo battery is a lightweight, reliable power source ideal for vehicles where space and weight matter. Equipped with the Traxxas iD® connector, this pack simplifies charging by automatically configuring settings when used with a Traxxas iD-compatible charger. Great for hobbyists looking for consistent performance in a compact form. ⚡ Features: 🔋 3000mAh Capacity – Balanced for light-duty bashing or casual driving 🔌 7.4V 2-Cell (2S) Configuration – Delivers smooth, consistent 2S performance 🔗 Traxxas iD® Connector – Auto-detects cell count and chemistry for worry-free charging 🧊 Hard Case Shell – Protects the battery during use and transport 📏 Slightly Smaller Footprint – Ideal for tighter battery compartments 📦 Specifications: Voltage: 7.4V Cell Count: 2S (2-cell LiPo) Capacity: 3000mAh Connector Type: Traxxas High-Current iD® Perfect for casual running, lightweight vehicles, or smaller 1/10 models.Use only with Traxxas iD®-compatible chargers to ensure safe, optimized charging. 🔌✅

Read more less

Traxxas 2300mAh 11.1V 3-Cell LiPo Battery w/ iD® Connector (Part #2824X) 🔋Reliable Power for High-Performance RC Systems This 3S 11.1V 2300mAh LiPo battery delivers solid performance and long-lasting power in a compact footprint. Perfect for vehicles that require a lightweight, high-output pack, this Traxxas battery is equipped with an iD® connector for seamless charging and foolproof setup with Traxxas iD-compatible chargers. ⚡ Features: 🔋 2300mAh Capacity – Balanced power-to-weight ratio for 3S vehicles 🔌 11.1V 3-Cell Configuration – Ideal for compact models needing high voltage 🔗 Traxxas iD® Connector – Ensures safe, automatic charger settings 🧊 Hard Case Design – Durable protection for everyday use 📏 Compact Dimensions – Great for tight battery compartments 📦 Specifications: Voltage: 11.1V Cell Count: 3S (3-cell LiPo) Capacity: 2300mAh Connector Type: Traxxas High-Current iD® Compatible with select Traxxas 1/10 and 1/16 scale vehicles.Always use a Traxxas iD®-compatible charger for optimal performance and safety. 🔌✅

Read more less

🛠️ Traxxas Steel Wide-Face Mod 1.0 Spur Gear (46T / 50T / 54T) — Heavy-Duty Performance! Upgrade your drivetrain with Traxxas Steel Wide-Face Spur Gears, available in 46T, 50T, or 54T tooth options. Designed for maximum durability and load handling, these heavy-duty steel gears are perfect for high-torque setups, big power, and extreme bashing. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔩 Why Choose Steel? ✅ Wider face for increased tooth engagement ✅ Hardened steel construction for ultimate durability ✅ Perfect for high power brushless systems and intense terrain 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Best for short, technical tracks or heavy loads Smaller Spur (Lower T) 🔹 Smoother, slower take-off 🔹 More top speed 🔹 Ideal for open tracks and speed runs ✅ Compatible With: Traxxas Maxx Traxxas X-Maxx Traxxas XRT 📦 Includes: (1) Traxxas Steel Wide-Face Spur Gear in your selected size (46T, 50T, or 54T) 🌀 Need extreme strength and tuning flexibility? Steel is the way to go. Gear up your Maxx, X-Maxx, or XRT for whatever the track throws your way!

Read more less

Traxxas Mod 0.8 TRX-4 Spur Gear (45T)Precision Replacement for Smooth Power Delivery Overview:This is a genuine Traxxas 45-Tooth Mod 0.8 Spur Gear, designed as a direct replacement for TRX-4 and TRX-6 platforms. Built for durability and smooth performance, it's ideal for keeping your crawler running strong on the trails. Features: 45-tooth Mod 0.8 pitch gear OEM fit and performance Durable composite construction Ideal for routine maintenance or gear ratio tuning Includes: (1) 45T Mod 0.8 Spur Gear Compatibility: Traxxas TRX-4 Traxxas TRX-6

Read more less

Traxxas VXL Planetary Gear Differential – Part 2382Built Strong. Tuned for VXL Power. The Traxxas VXL Planetary Gear Differential is designed to handle the high output of brushless power systems. Featuring a steel ring gear for added strength, this complete kit is perfect for replacing or upgrading your existing diff on VXL-equipped vehicles. ✅ Heavy-duty steel ring gear – improved durability under brushless torque✅ Complete differential kit – all internal gears, shafts, and housing included✅ Smooth, consistent power delivery – ideal for high-speed bashing or racing✅ Designed for VXL models – fits most Traxxas 2WD platforms 📦 Includes Everything to Build One Differential: Differential housing Steel ring gear Planet gears & internal shafts Cross pins, output gears, & assembly hardware 🔩 Part #: 238 💡 Pro Tip: Use with high-quality diff grease for smoother operation and longer gear life.

Read more less

  Traxxas Differential Output Yokes (Black) (VXL)Part #: 4628R Keep your drivetrain running smooth with this set of replacement Traxxas Differential Output Yokes for VXL models. Designed for durability and precision fit, these black yokes ensure proper power delivery from the differential to the driveshafts. Features: Genuine Traxxas replacement parts Compatible with VXL drivetrain setups Heavy-duty black finish for a clean, factory look Includes hardware for easy installation Includes: (2) Differential Output Yokes (2) 3x5mm Countersunk Screws (2) Screw Pins  

Read more less

  This is a replacement front shock tower from Traxxas. Designed for durability and precision fit, it mounts directly to the front bulkhead and provides secure upper mounting points for the front shocks. 🔧 Features: Direct replacement for stock front shock tower Provides upper shock mounting location Precision-molded from tough composite material Easy to install – bolts directly to front bulkhead 📦 Includes: (1) Front Shock Tower ✅ Compatibility: Traxxas Slash Traxxas Rustler Traxxas Bandit Traxxas Stampede

Read more less

Traxxas TRX-4M Low Range Transmission Gear Set – Part #9776R🐢 Precision Crawling Power. Upgrade your TRX-4M with this Low Range Transmission Gear Set featuring a 40.3:1 reduction ratio. Designed for ultimate torque and slow-speed control, this setup is ideal for serious crawling and technical trail driving. ✅ 40.3:1 gear reduction for ultra-low speed crawling✅ Perfect for scale realism and obstacle control✅ Includes 11-tooth pinion gear✅ Drop-in fit for all TRX-4M models✅ Genuine Traxxas performance and durability 📦 Includes: (1) Low Range Transmission Gear Set (1) 11T Pinion Gear 💡 Pro Tip: Pair with high-torque servos and weighted wheels for the ultimate crawling setup.

Read more less

  Get your TRX-4M back on the trail fast with these pre-assembled center driveshafts. Designed specifically for the 1/18-scale TRX-4M, this set includes both front and rear center driveshafts—ready to install with no assembly required. Features:• Factory-assembled for quick, hassle-free replacement• Includes both front and rear center driveshafts• Durable molded construction for dependable performance• Direct fit for all Traxxas TRX-4M models Includes:• (1) Front Center Driveshaft (Assembled)• (1) Rear Center Driveshaft (Assembled)Part Number: 9755 Fast fixes. Trail tough. Keep your 1/18 TRX-4M rolling strong with genuine Traxxas parts. Let me know if you’d like this paired with axle shafts or drivetrain upgrade options!

Read more less

Traxxas Power Cell 7-Cell Hump NiMH Battery Pack w/ iD Connector (8.4V/3000mAh)📦 Part #: TRA2926X The Traxxas Power Cell 7-Cell 3000mAh Hump Pack is built for serious power and long-lasting performance. Designed specifically to fit Traxxas models requiring a hump-style configuration, this pack features 8.4 volts of output for more punch and better acceleration compared to a 6-cell pack. ⚙️ Features: 🔌 Traxxas iD High-Current Connector for quick, optimized charging 🔋 3000mAh Capacity for extended run times 🧵 12-Gauge MAXX Cable Wire allows high-efficiency power transfer 🪙 Gold-Plated Copper Terminals reduce resistance and improve durability ✅ Hump-style layout fits models designed with tight battery compartments Get more out of your vehicle with high output and reliability. Best when paired with the Traxxas EZ-Peak iD Charger for safe, fast, and automatic charging.

Read more less

Traxxas Hardened Long Shock Shafts (2) Part #: 1664T | Heavy-Duty Upgrade Upgrade your suspension durability with the Traxxas 1664T Hardened Shock Shafts. Designed to handle tougher terrain and bigger impacts, these hardened steel shafts are a direct replacement for standard long shock shafts used in popular Traxxas models. 📦 Includes: (2) Hardened Long Shock Shafts ✅ Features: Hardened steel construction for increased strength Enhanced resistance to bending and wear Direct replacement for standard long shock shafts Precision-machined for smooth shock performance 🚗 Compatibility: Traxxas Slash Bandit Stampede / Nitro Stampede Rustler Nitro Sport A great upgrade for racers and bashers looking for more reliable shock performance under stress.

Read more less

  Restore the strength and handling of your X-Maxx with this genuine Traxxas 7731 left lower suspension arm. Built from Traxxas’ high-impact composite material, this arm is designed to take the abuse of hardcore bashing while maintaining precise suspension alignment. Features Official Traxxas 7731 replacement part Fits left lower suspension position High-strength composite construction Direct bolt-on factory fit — no modifications needed Includes (1) Traxxas X-Maxx Left Lower Suspension Arm (7731)

Read more less

⚙️ Precision Aluminum Spur Gear Upgrade for Traxxas 2WDTake your Traxxas performance to the next level with the Hot Racing 48 Pitch Hard Anodized Aluminum Spur Gear (90T). Designed for speed enthusiasts and precision builders, this CNC-machined aluminum gear provides smoother power transfer, reduced flex, and improved efficiency compared to the stock nylon spur gear. 🔩 About the Spur Gear Crafted from 6061-T6 aluminum, this gear is hard-anodized in a sleek light gunmetal finish for enhanced strength and wear resistance. The included silver anodized countersunk washers and high-strength hardware ensure a secure and professional-grade installation. Perfect for high-RPM setups and consistent gear mesh, this upgrade provides durability without sacrificing performance. 🌟 Features CNC-machined 6061-T6 aluminum for high precision and strength Hard-anodized gunmetal finish resists corrosion and wear Direct replacement for the stock nylon spur gear Silver anodized washers and mounting hardware included 48 pitch gearing with a 90-tooth configuration Ideal for smooth, efficient, high-speed performance 📏 Specifications Pitch: 48P Tooth Count: 90T Mounting Holes: 3 Tooth Face Width: ~5mm 📦 Includes (1) 48 Pitch Aluminum Spur Gear (90T) (3) Mounting Screws (3) Silver Anodized Countersunk Washers (3) Flat Washers (for optional spacing) ⚠️ Notes Aluminum gears prioritize speed and precision over maximum durability. Do not overtighten the slipper clutch — excessive tension may cause gear failure. Recommended motor temps: below 160°F, ESC below 160°F. For added motor security, use Hot Racing HRATE18L06 motor lock plate. Always check gear alignment before running. 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD 🏁 Built for precision, performance, and durability — the Hot Racing 90T aluminum spur gear keeps your Traxxas running smooth, fast, and reliable.

Read more less

Upgrade your 2WD Traxxas ride with the HD Cold Weather Front Suspension Arm Set. Built from Traxxas’ proprietary heavy-duty composite, these arms are engineered to handle extreme loads, big landings, and cold weather conditions without breaking. Perfect for bashing, racing, or speed runs, they deliver maximum durability with the right amount of flex. ✅ Heavy-Duty Composite – Designed to handle high loads and resist breakage✅ Cold Weather Ready – Maintains strength and flexibility even in low temps✅ Direct Fit Replacement – Easy install with factory precision✅ Extreme Durability – Built for jumps, landings, and high-performance driving Compatibility: Traxxas Slash 2WD Traxxas Stampede 2WD Traxxas Rustler 2WD Includes: (2) HD Cold Weather Front Suspension Arms (Black) ⚡ Send it higher, land it harder — these HD arms are ready for anything.  

Read more less

Upgrade your drivetrain with the Traxxas Rear HD Driveshaft Assembly, built tough with a 6mm axle for maximum durability. Designed for use on the Hoss 4x4, Rustler 4x4, and Slash 4x4, this assembly is required when your vehicle is equipped with the Traxxas Extreme Heavy Duty Suspension Upgrade Kit (TRA9080X). ✅ Heavy-Duty Strength – Built to handle extreme torque and off-road abuse✅ Direct Replacement – OEM fit for Hoss 4x4, Rustler 4x4, and Slash 4x4✅ Complete Assembly – Comes pre-assembled with axle and hardware for quick install✅ For HD Suspension Models – Compatible only with vehicles using the TRA9080X Extreme Heavy Duty Suspension Kit Includes: (1) Rear HD Driveshaft Assembly w/ 6mm axle Required hardware Compatibility: Traxxas Hoss 4x4 (with TRA9080X kit) Traxxas Rustler 4x4 (with TRA9080X kit) Traxxas Slash 4x4 (with TRA9080X kit) Take your 4x4’s durability to the next level with the Traxxas 9052 Rear HD Driveshaft Assembly — built for serious bashing and racing.

Read more less

⚙️ Smooth power. Built-in protection. The Traxxas Complete Slipper Clutch is a ready-to-install assembly designed for the Slash 4x4. It helps protect your drivetrain by allowing controlled slip under heavy load, reducing wear on gears and providing smoother power delivery. Perfect for maintenance, repairs, or as a spare for quick swaps at the track or in the field. ✅ Genuine Traxxas replacement part✅ Fully assembled for easy installation✅ Protects drivetrain from excessive shock loads✅ Restores smooth acceleration and control 📦 Includes:• (1) Complete Slipper Clutch Assembly for Slash 4x4  

Read more less

Upgrade your drivetrain with precision and strength. The Traxxas 20T Machined Mod 1.0 Pinion Gear is built for serious performance, featuring a 5mm bore and high-quality machined steel construction. Designed for the Traxxas E-Revo 2.0 and Maxx, this gear is ideal for high-torque brushless setups when paired with a steel spur gear. Features:• 20-tooth Mod 1.0 pitch• 5mm bore fits 1/8-scale motor shafts• Precision-machined steel construction• For use with steel spur gears only• Perfect for E-Revo 2.0 and Maxx Includes:• (1) 20T Machined Steel Pinion GearPart Number: 6494R

Read more less

Unleash the full potential of your TRX-4M with the Traxxas 6250 Brushless FOC Power System Combo! This powerful upgrade delivers up to 50% more speed and performance than the stock brushed system, all while maintaining low-speed control and crawling precision with Field-Oriented Control (FOC) technology. The 3350kV brushless outrunner motor and waterproof ECM install easily with no mods—just plug and play. Fully compatible with Traxxas TQ and TQi transmitters and 2S TRX-4M iD® LiPo batteries. Pro Scale® lighting and three selectable drive modes (Sport, Trail, Crawl) are all retained. Features:• Powerful 3350kV brushless outrunner motor• Field-Oriented Control (FOC) for incredible torque and control• Plug-and-play installation using original ECM mounts• Retains Pro Scale® lighting and 3 drive modes• Waterproof ECM with integrated 3-channel receiver• Compatible with 2S TRX-4M iD® LiPo batteries• Includes 11-tooth brass pinion gear• Works with TQ and TQi transmitters Includes:• (1) TRX-4M Brushless FOC Power System ComboPart Number: 6250 Take your TRX-4M from fun to fierce—with the brushless upgrade that redefines control and performance.

Read more less

Traxxas TRX-4M Roll Bar LED Light Harness – Part #9863💡 Light It Up. Add Night-Crawling Style. Designed to fit the TRX-4M Chrome Roll Bar (#9862), this LED light harness brings your mini rig to life with bright, functional lighting. Whether you're hitting the trails after dark or just boosting your scale looks, this is the perfect finishing touch. ✅ Specifically fits Traxxas TRX-4M Roll Bar (#9862)✅ Pre-wired LED harness for quick and easy install✅ Adds extra visibility and scale realism✅ Genuine Traxxas quality and compatibility 📦 Includes: (1) LED Light Wire Harness

Read more less

Traxxas Mini Maxx® Clear Body Kit (10711) – Frame, Fit & Finish! Customize Your Mini Maxx Like a Pro.This clear, clipless-mount body kit is the perfect canvas to personalize your Traxxas Mini Maxx. Everything you need is included for a clean install and pro-level style: ✅ Crystal-clear polycarbonate shell – ready for your custom paint job✅ Pre-cut window masks – get sharp, precise lines every time✅ Full decal sheet – add authentic Traxxas flair✅ Front & rear body latches + mounting hardware – plug-and-play convenience✅ Clipless mounting design – modern, sleek fit without traditional body clips Designed specifically for the Mini Maxx platform, this body kit (part 10711) ensures a perfect match and factory-level performance. Whether you’re racing or customizing your ride, this shell delivers both function and flair. 🛠️ What You’re Getting: Clear polycarbonate body Window masks Decal sheet Front/rear latches + hardware 🎨 What You’ll Do: Paint to match your style Install decals & masks Snap it onto your chassis with no clips Customize. Race. Repeat. Let me know if you'd like me to tailor it for a specific channel (like Facebook or Google), or drop your next product when you're ready!

Read more less

  Traxxas BFGoodrich® Mud-Terrain™ T/A® KM3 Tires (2.4x1.0") – Part #9868🛞 Real Looks. Real Grip. Ready to Crawl. Upgrade your TRX-4M with officially licensed BFGoodrich® Mud-Terrain™ T/A® KM3 tires for unbeatable traction and scale realism. These 2.4x1.0" tires are perfect for conquering trails, rocks, and mud — just like the real thing. ✅ Officially licensed BFGoodrich® tread pattern✅ Molded in a high-traction rubber compound✅ Perfect scale detail with aggressive off-road look✅ Compatible with TRX-4M 1/18 scale vehicles 📦 Includes: (2) BFGoodrich® Mud-Terrain™ T/A® KM3 Tires (2.4x1.0")

Read more less

  Light up the trail with the Traxxas TRX-4 LED Expedition Rack Scene Light Kit. Designed as an optional accessory for the TRX-4 Expedition Rack, these ultra-bright LED scene lights add a whole new level of realism and visibility to your scale adventures. Note: Requires TRX-4 Power Supply (TRA8028) for operation. Features:• Adds scale-realistic scene lighting to your TRX-4• Mounts directly to the TRX-4 Expedition Rack• Super-bright white LEDs for enhanced visibility• Durable and weather-resistant design• Requires TRA8028 power supply (sold separately) Includes:• (1) LED Expedition Rack Scene Light KitPart Number: 8086 Whether it’s night crawling or just adding to your scale setup—light the way in true TRX-4 style.

Read more less

Traxxas TRX-4 Spool – Part #8297🔒 Simple. Strong. Always Locked. Looking to boost crawling performance on your TRX-4? The Traxxas Spool (8297) is a direct drop-in that eliminates the locking differential for a full-time locked setup. Perfect for hardcore crawling, this upgrade increases traction, reduces complexity, and delivers unmatched consistency on extreme terrain. ✅ Replaces front or rear locking diff with full-time locked spool✅ Boosts traction and climbing ability✅ Reduces mechanical complexity✅ Ideal for rock crawling and technical trails✅ Includes spool and hardware for easy installation 📦 Includes: (1) Spool Mounting hardware 💡 Pro Tip: Run one spool in the rear for added traction, or both front and rear for ultimate crawling control.

Read more less

  Overview:The Traxxas XX-Long Hard Chrome Shock Shafts are designed for durability and smooth suspension performance. Precision-ground and hard chrome-plated, these shafts provide resistance against wear and bending while ensuring ultra-smooth shock action, even under extreme RC driving conditions. Features: Set of 2 XX-Long shock shafts Hard chrome finish for maximum durability and smooth operation Precision-ground for exact fit and long life Direct factory replacement for Traxxas big-bore and Ultra shocks Compatibility: Traxxas Ultra Shocks and Big Bore Shocks requiring XX-Long shafts Commonly used in larger Traxxas models such as: Stampede Rustler Bandit Slash (depending on configuration) Always check your manual for exact fitment Includes: (2) XX-Long Hard Chrome Shock Shafts Part Number: 2656

Read more less

  Add Weight. Add Traction. Add Control. Upgrade your TRX-4M for superior crawling performance with the Traxxas Brass Differential Covers. Precision-machined from solid brass, these optional covers add low-mounted weight directly over the axles — improving stability, traction, and balance on steep climbs and technical trails. Trail-Tested Brass Performance These brass differential covers replace the stock composite versions, providing enhanced durability and a lower center of gravity without altering your crawler’s geometry. The added weight helps keep your tires planted and your truck steady, making this a must-have upgrade for any serious TRX-4M crawler. Features: Machined brass construction adds valuable weight low on the chassis Improves traction, stability, and climbing performance Direct-fit design — simple installation, no modifications needed Durable finish resists corrosion and wear Genuine Traxxas factory upgrade part Includes: (2) Brass Differential Covers (8) 1.6×12 mm Button Head Screws Compatibility: Traxxas TRX-4M Traxxas TRX-4MT Traxxas Tough — Brass-Built for Better Crawling.

Read more less

  Add Weight. Increase Control. Boost your TRX-4M’s steering precision and front-end traction with the Traxxas Brass Steering Blocks. Each block adds 7 grams of low-mounted brass weight, improving stability, balance, and climbing performance on technical terrain. Designed for the TRX-4M Ford Bronco and Defender, these are a must-have upgrade for serious crawlers. Performance You Can Feel Machined from high-quality brass, these steering blocks replace the stock composite parts to lower the truck’s center of gravity and improve tire contact on uneven terrain. The added weight helps your crawler stay planted on steep inclines and rock obstacles — delivering smoother steering and superior control. Features: Precision-machined brass construction adds 7 g per side Lowers center of gravity for better crawling performance Enhances steering traction and stability Includes mounting hardware with threadlock for a secure install Direct factory fit with no modifications required Genuine Traxxas factory upgrade Includes: (1) Left Brass Steering Block (7 g) (1) Right Brass Steering Block (7 g) (2) 2.5×12 mm BCS (with threadlock) (4) 2×6 mm SS Screws (with threadlock) Compatibility: Traxxas TRX-4M Ford Bronco (Model #97074-1) Traxxas TRX-4M Defender (Model #97054-1) Traxxas Tough — Add Brass. Gain Control.

Read more less

  Add Weight Down Low. Conquer More Terrain. Enhance your TRX-4M’s crawling capability with the Traxxas Brass Lower Shock Spring Retainers. These precision-machined brass retainers replace the stock plastic pieces, adding valuable low-mounted weight to improve traction, stability, and climbing performance on steep and uneven terrain. Performance Upgrade for Serious Crawlers By lowering the vehicle’s center of gravity, these brass retainers help your TRX-4M stay planted and composed while tackling technical trails. Designed for a direct factory fit, they install easily and deliver immediate performance gains — a must-have upgrade for any dedicated rock crawler. Features: Machined brass construction adds low-mounted weight Improves crawling stability and reduces rollovers Enhances traction on steep and uneven surfaces Direct fit upgrade — no modifications needed Durable finish for long-lasting performance Genuine Traxxas factory brass option part Includes: (4) Brass Lower Shock Spring Retainers Compatibility: Traxxas TRX-4M Traxxas TRX-4MT Traxxas Tough — Brass Power for Better Crawling.

Read more less

Bring your 2021 TRX-4 Bronco to life with the ultra-realistic Pro Scale LED Light Set from Traxxas. Designed specifically for the Traxxas TRX-4 when equipped with the 2021 Ford Bronco body, this full-feature light kit adds a stunning level of realism and function to your rig—including headlights, brake lights, turn signals, and more. With Pro Scale technology, you’ll enjoy automatic turn signal cancellation, high/low beam headlights, and reverse lighting, all controlled dynamically based on vehicle inputs. For ultimate customization, add the optional Traxxas Link module (TRA6511, sold separately) to configure light functions right from your mobile device. Features:• Functional headlights with high/low beam control• Halo-style daytime running lights• Brake and reverse lights• Turn signals with auto-cancel• Flashing hazard lights• Pro Scale power module and distribution block included• Compatible with Traxxas Link for light customization Includes:• (1) Complete LED Light Kit• (1) Pro Scale Lighting Power Module w/ Mount• (1) Lighting Distribution Block w/ Mount• (1) Motor Sensor Wire Harness• (1) Front and Rear Light Harness• (1) MAXX Link Cable• Installation HardwarePart Number: 9290 Compatibility:• Traxxas TRX-4 w/ 2021 Ford Bronco Body Upgrade your Bronco with light performance that’s as scale as it gets—trail ready, day or night.

Read more less

Tough Looks. Real Protection. Keep your TRX-4M Ford Bronco looking sharp and performing strong with the Traxxas Front & Rear Bumper Set. These genuine factory replacement bumpers provide the perfect blend of scale realism and trail-ready durability, giving your mini crawler the protection it needs for serious off-road adventure. Trail-Tested Design Crafted from high-strength composite material, these bumpers are designed to absorb impacts and protect vital components without adding unnecessary weight. With authentic Bronco styling, they maintain the truck’s rugged good looks while standing up to tough trail conditions. Features: Durable composite construction for long-lasting performance Includes both front and rear bumpers Authentic scale Bronco styling Direct factory fit — easy installation, no modifications needed Genuine Traxxas factory replacement parts Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Traxxas TRX-4M Ford Bronco (Model #97074-1) Traxxas Tough — Built Bronco Strong.

Read more less

Traxxas Rubber Shock Diaphragms (4-Pack) Part #: 1765 Keep your suspension running smooth and consistent with genuine Traxxas Rubber Shock Diaphragms. These OEM replacements are designed to fit securely in the top of your shock bodies, providing a proper seal and helping to maintain optimal damping performance. 📦 Includes: (4) Rubber Shock Diaphragms ✅ Features: Genuine Traxxas replacement parts Seals shock cap to maintain pressure and oil control Ensures smooth, consistent shock action Ideal for restoring performance to worn or leaking shocks Compatible with a variety of Traxxas vehicles using oil-filled shocks 🛞 Restore your shocks to like-new condition with these essential rubber diaphragms!

Read more less

Traxxas 3x8mm Flat Head Screw (6) (VXL) – Part #3931🔩 Secure Fit. Clean Finish. The Traxxas 3x8mm Flat Head Screws are precision-machined for a flush, low-profile installation. Ideal for use in VXL and other Traxxas vehicles, these flat head screws ensure a snug, countersunk fit for components where a smooth finish is essential. ✅ Perfect for flush-mount applications✅ 3x8mm metric sizing✅ Flat head design for clean installation✅ Genuine Traxxas quality✅ Great for chassis, body panels, and more 📦 Includes: (6) 3x8mm Flat Head Screws 💡 Pro Tip: Always check your manual for proper screw placement and thread-lock recommendations for metal-on-metal applications.  

Read more less