Upgrade your X0-1 with precision-machined strength and style using the Traxxas 6469 17mm Aluminum Splined Wheel Hub Set. Designed as a direct replacement for the X0-1 supercar, these hubs provide a secure, slip-resistant connection between the wheel and axle thanks to their splined interface. Made from high-quality blue-anodized aluminum, this set boosts durability while adding a clean performance look to your vehicle. Features CNC-machined aluminum construction Blue anodized finish for durability and style Splined design for a secure, positive wheel-to-axle connection Direct replacement for the Traxxas X0-1 Increased strength over plastic hub options Includes (4) 17mm Aluminum Splined Wheel Hubs (Blue) Compatibility Traxxas X0-1

Read more less

Make wheel changes fast and hassle-free with the Traxxas 17mm Splined Wheel Wrench. Designed specifically for Traxxas vehicles using 17mm splined wheel nuts, this wrench provides a perfect fit and smooth engagement so you can tighten or remove wheels without slipping or rounding out the nut. Note: This wrench works only with Traxxas 17mm splined wheel nuts. It is not compatible with standard 17mm hex nuts. Features Genuine Traxxas replacement wrench For Traxxas 17mm splined wheel nuts only Smooth, secure engagement for easy wheel installation and removal Ideal for Revo®, E-Revo® 2.0, and other Traxxas models using splined wheel nuts

Read more less

Keep ESC temperatures under control with the Traxxas Velineon VXL-8S Cooling Fan. Designed as a direct replacement for the VXL-8S system, this fan helps maintain optimal operating temperatures during high-power runs and extreme bashing sessions. Ideal for replacing a damaged fan or keeping a spare on hand to protect your electronics when pushing big power. Features Genuine Traxxas replacement part Designed for the Velineon VXL-8S system Helps prevent overheating under high loads Direct-fit, plug-and-play installation Compatibility Traxxas Maxx Traxxas Sledge Traxxas X-Maxx Traxxas XRT Includes (1) Traxxas Velineon VXL-8S Cooling Fan  

Read more less

Replace worn or damaged drivetrain components with the Traxxas TRX-4M High Trail Center Driveshaft Set. These extended center driveshafts are factory-equipped on TRX-4M High Trail Edition models and are precision-engineered for a perfect, hassle-free fit. Designed specifically for the High Trail wheelbase, these driveshafts provide smooth, reliable power transfer to the axles and install easily as a direct replacement using the included hardware. ⚠️ Important: These are extended driveshafts and will NOT fit standard TRX-4M models. Features Genuine Traxxas replacement parts Factory-spec fit for TRX-4M High Trail Edition Extended length for High Trail wheelbase Smooth, reliable drivetrain performance Easy, direct replacement installation Compatibility Traxxas TRX-4M High Trail Edition(Monster Truck & Micro Crawler versions) ❌ Not compatible with standard TRX-4M models Includes (1) Front Center Driveshaft (1) Rear Center Driveshaft (2) O-Rings (2) Pins (6) Mounting Screws  

Read more less

Upgrade durability and drivetrain efficiency with the Traxxas TRX-4M Aluminum Center Driveshaft Set. Machined from high-strength 6061-T6 aluminum, these optional center driveshafts replace the stock plastic units to reduce flex under load and deliver smoother, more efficient power transfer. Designed for use on both the front and rear of the TRX-4M platform, these driveshafts add strength where it counts while also giving your rig a clean, customized look with multiple anodized color options. Important: Requires TRX-4M Metal Driveshafts (TRA9751), sold separately. Features Precision-machined 6061-T6 aluminum construction Increased strength and durability over stock plastic driveshafts Reduced drivetrain flex for improved power transfer Direct fit for front and rear center positions Available in multiple anodized colors for custom styling Available Colors Orange Green Red Gray Blue Compatibility Traxxas TRX-4M Traxxas TRX-4MT Includes (1) Front Aluminum Center Driveshaft (1) Rear Aluminum Center Driveshaft  

Read more less

The Traxxas Front Spring (4458) is a factory replacement suspension spring designed to restore proper ride height and handling performance. Ideal for replacing worn or damaged springs, this spring delivers consistent suspension response for reliable performance on the track or during bashing. Perfect to keep on hand for maintenance, tuning, or rebuilds. Features Genuine Traxxas replacement part Restores proper front suspension performance Consistent spring rate and durability Direct replacement for easy installation Includes (1) Traxxas Front Spring  

Read more less

Replace worn or damaged suspension components with the Traxxas Rear Bulkhead, designed as a direct replacement for the Traxxas Slash 4x4 platform. This factory-spec bulkhead restores proper drivetrain alignment and rear suspension strength for reliable performance on the track or during aggressive bashing. Perfect for maintenance, rebuilds, or keeping spares on hand. Features Direct replacement Traxxas part Factory-spec fit and durability Restores proper rear drivetrain alignment Ideal for repairs, rebuilds, and maintenance Compatibility Traxxas Slash 4x4 Includes (1) Traxxas Rear Bulkhead

Read more less

The Hot Racing HRASLF254T is a lightweight aluminum 32-pitch (0.8 module) spur gear designed for Traxxas 1/10 vehicles equipped with slipper clutch transmissions. CNC machined from durable 6061-T6 aluminum and hard anodized in a gunmetal finish, this spur gear provides smooth, consistent power delivery while reducing rotating mass compared to steel options. Ideal for racers and bashers looking to fine-tune drivetrain response without sacrificing fitment or reliability. 🔧 Features CNC-machined 6061-T6 aluminum construction Hard anodized gunmetal finish for durability Lightweight design reduces rotating mass Direct-fit replacement for slipper clutch transmissions 0.8 module pitch (compatible with 32-pitch gearing) 📐 Specifications Number of Teeth: 54 Gear Pitch: 0.8 module (32 pitch compatible) Material: 6061-T6 Aluminum 📦 Includes 54T Aluminum 0.8 Mod Spur Gear ⚠️ Requirements & Notes Designed for vehicles equipped with a slipper clutch transmission Not compatible with center gear differential ✅ Compatibility Traxxas Jato 3.3 Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4 Traxxas T-Maxx 3.3

Read more less

Fine-tune your suspension with these Traxxas GTR Shock Springs, featuring a 4.9 spring rate for precise handling adjustments. Designed for use with Traxxas GTR shocks, these springs allow you to dial in the perfect feel for lighter or heavier vehicle setups, different rocker systems, or specific track conditions. Manufactured from high-quality spring steel and finished with a durable powder-coated coating, these springs deliver consistent performance and long-lasting resilience. Key Features Compatible with Traxxas GTR shocks 4.9 spring rate (silver indicator) Helps tune suspension for weight, traction, and rocker changes High-quality spring steel construction Durable powder-coated finish Sold as a pair (2 springs) Important Note Spring rate is identified by colored dots on the spring ends, not by the spring’s overall color.

Read more less

Give your Mini Maxx® a fresh new look with the official Traxxas Pre-Painted ProGraphix® Body. Designed as a direct replacement for the Mini Maxx platform, this body arrives with the signature Traxxas ProGraphix® printed graphics—ready for you to apply your own final color for a fully customized finish. Whether you're restoring a damaged shell or upgrading your truck’s appearance, this is the Mini Maxx body you want, in the color you choose. Key Features Genuine Traxxas replacement body Pre-printed ProGraphix® design Requires paint for final color application Factory-trimmed and decal-ready Fits the Traxxas Mini Maxx® platform Includes (1) Traxxas Mini Maxx® Pre-Painted ProGraphix® Body Notes Body arrives with graphics applied Final paint color must be added by the user Mini Maxx chassis shown in photos not included

Read more less

Customize your WideMaxx with a body that’s ready for your creativity. The Traxxas 8918 WideMaxx Clear Truck Body is molded from high-quality polycarbonate and designed specifically for the long wheelbase (352mm) WideMaxx platform. Paint it your way and create a look that stands out on the track or at the bash spot. This clear body includes window masks and decals, giving you everything you need to create a professional finish. Features High-quality clear polycarbonate construction Ready for custom paint schemes Pre-trimmed window masks included Decal sheet included for finishing touches Designed for the long wheelbase (352mm) WideMaxx Perfect replacement or custom project body Compatibility Only fits: Traxxas WideMaxx (long wheelbase 352mm) Model: TRA89086 Not compatible with the standard wheelbase Maxx or original Maxx platforms. Includes (1) Clear WideMaxx Truck Body Window Masks Decal Sheet

Read more less

Upgrade or replace your suspension components with the Traxxas 8145 Rear Lower Suspension Links. These durable 5x115mm links provide strength, stability, and consistent handling for your Traxxas vehicle. Whether you're restoring stock performance or reinforcing your setup for harder bashing, these lower links are built to handle intense off-road use. Perfect factory fitment ensures quick installation and dependable performance right out of the bag. Features: Genuine Traxxas replacement suspension links 5x115mm size for accurate fitment Durable construction for reliable off-road strength Restores proper suspension geometry and handling Sleek black finish Includes: (2) Rear Lower Suspension Links (Black)

Read more less

Keep your XRT or X-Maxx running strong with the Traxxas 7720X Front Upper Bulkhead. This genuine Traxxas replacement part restores proper alignment and structural support to the front end of your truck, ensuring durability and precision under extreme bashing, high-speed runs, and aggressive off-road driving. Designed for a direct factory fit, this bulkhead installs easily and maintains the rugged reliability Traxxas vehicles are known for. Features: Genuine Traxxas replacement component Restores front-end structure and alignment Direct fit for XRT and X-Maxx models Durable composite construction for long-lasting performance Includes: (1) Front Upper Bulkhead

Read more less

Upgrade or fine-tune your Traxxas Revo’s suspension with these Black 4.4 rate GTR Shock Springs. Designed for precision performance, Traxxas offers a full range of GTR spring rates to match different truck setups, weight distributions, and rocker configurations. Whether you’re dialing in your Revo for racing, bashing, or crawling, these springs provide consistent response and durability. Made from high-quality spring steel and coated with a durable powder finish, each spring features color-coded rate markings for quick identification and setup changes. Features: 4.4 spring rate (Black color code) Designed for Traxxas GTR shocks Helps fine-tune suspension for different weight setups and rocker styles High-quality spring steel for long-lasting performance Durable powder-coated finish Color-coded dots for easy rate identification Includes: (2) GTR 4.4 Shock Springs (Black)

Read more less

Traxxas ProGraphix® R/C Body Paint – 5 oz or 13.5 oz Aerosol (Multiple Colors Available) Traxxas ProGraphix® Custom R/C Paints deliver professional-grade, airbrush-like results with the ease and convenience of aerosol spray cans. Whether you’re painting a new body or freshening up a favorite, ProGraphix gives you bold color, clean coverage, and long-lasting results. ProGraphix® Paint Features: Huge variety of custom colors Available in 5 oz and 13.5 oz sizes Smooth, ultra-fine spray pattern Fast-drying formula Clog-resistant comfort nozzle Resistant to nitro fuel Formulated for polycarbonate (Lexan®) bodies 🎨 For best results, follow instructions on the can. Results may vary depending on surface prep, application, and backing colors. ⚠️ DANGER: Extremely flammable liquid and vapor. Keep out of reach of children.⚠️ CALIFORNIA PROP 65 WARNING: Contains chemicals known to cause cancer and birth defects. Learn more

Read more less

Traxxas EZ-Peak Dual 3S Completer Pack (5000mAh x2, 11.1V) w/iD ChargerTwo Batteries. One Powerful Charger. All the Performance. Completer Pack Overview:The Traxxas EZ-Peak 3S Completer Pack is the perfect solution for vehicles that require dual 3S LiPo batteries—like the X-Maxx and XO-1—or for drivers who just want double the runtime. With two 5000mAh 11.1V Power Cell LiPos and the EZ-Peak Dual 100W Charger, you get fast, safe charging with Traxxas iD® technology and power that doesn’t quit. Why You’ll Love It: iD® Auto Battery Detection: Just plug it in. No setup, no fuss. Charges two batteries simultaneously—even mixed chemistries (LiPo + NiMH). 100W output delivers up to 8A per channel for high-speed charging. Compatible with legacy Traxxas High-Current Connectors (Advanced Mode). Durable, compact design with built-in balance ports for older LiPos. Battery Specs (TRA2872X): Type: LiPo Configuration: 3S (11.1V) Capacity: 5000mAh Continuous Discharge: 25C (125A) Burst Rate: 50C (250A) Max Charge Rate: 2C (10A) Dimensions: 155 x 26 x 44mm Weight: 13.3oz (376g) Charger Specs (TRA2972): Output Power: 100W Charge Current: 1A–8A Battery Types: 2–3S LiPo / 5–8 Cell NiMH AC Input: 100–240V Dimensions: 176 x 138 x 57mm Net Weight: 575g In the Box:✔ (1) Traxxas EZ-Peak® Dual 100W iD® Charger✔ (2) Traxxas 3S 5000mAh 25C LiPo Batteries w/iD® Connectors IMPORTANT:⚠️ For safety, only charge these batteries with Traxxas iD-equipped chargers.⚠️ Never leave charging batteries unattended. Always follow LiPo safety practices.

Read more less

Oil, shock (50 wt, 600 cSt, 60cc) (silicone)

Read more less

🔋 Traxxas EZ-Peak 2S Single Completer Pack (Charger + 5800mAh LiPo) Looking to power up your Traxxas vehicle the easy way? The EZ-Peak Completer Pack includes the trusted Traxxas EZ-Peak Plus iD Charger and a powerful 5800mAh 2S 25C LiPo battery — perfect for most 2S-compatible Traxxas RTR models. 💡 No complicated setup. Just plug in and go! ⚡ What's Inside: (1) Traxxas EZ-Peak Plus Charger (TRA2970) (1) 5800mAh 2S 25C LiPo Battery w/iD (TRA2843X) 🔌 Charger Features: iD Auto Battery Recognition for safe, easy charging Charges 2S–3S LiPo or 5–8 cell NiMH batteries Up to 4A fast charging (40W Max) Built-in balance ports — no balance boards needed Storage Mode to extend battery life Compact and reliable with AC power input 📐 Charger Specs: Input: 100–240V AC Output: 1.0–4.0A (40W Max) Dimensions: 146 x 123 x 53mm Weight: 365g 🔋 Battery Specs (TRA2843X): Type: 2S LiPo Capacity: 5800mAh Continuous Discharge: 25C (145A) Max Burst Rate: 50C (290A) Voltage: 7.4V Dimensions: 137 x 25 x 43mm Weight: 308g iD-equipped for use with Traxxas iD chargers ✅ Perfect For:Anyone who needs a complete 2S battery and charging solution for their Traxxas vehicle — especially for models like the Slash, Rustler, Bandit, Stampede, and more.

Read more less

  Keep your TRX-4M running strong with this genuine Traxxas 2S LiPo battery! Compact, lightweight, and built for performance, it delivers consistent 7.4V power and 750mAh capacity with a 20C discharge rate—perfect for extended crawling adventures. ✅ Capacity: 750mAh✅ Voltage: 7.4V (2S)✅ Discharge Rate: 20C✅ Connector: Traxxas High-Current✅ Compatible With: TRX-4M Engineered by Traxxas for optimal runtime, reliability, and fit in your TRX-4M.

Read more less

⚠️ Important Compatibility Note:• Traxxas VXL Brushless models = 2S & 3S LiPo compatible• Traxxas XL-5 Brushed models = 2S LiPo ONLYBe sure to select the correct battery for your vehicle. The Traxxas 3S 11.1V 5000mAh 25C Power Cell LiPo (2872X) delivers the extreme punch, runtime, and reliability needed for high-performance Traxxas vehicles. Designed exclusively for Traxxas models, this pack features the patented Traxxas iD High-Current Connector, ensuring easy, automatic, and safe balance-charging with Traxxas iD chargers. Built with premium low-resistance cells, durable construction, and heavy-duty wiring, this 3S pack unleashes the full potential of VXL Brushless systems — giving your truck, buggy, or boat incredible acceleration and top speed. Features 3S (11.1V) 5000mAh capacity for long run times 25C continuous / 50C burst discharge rate Traxxas iD High-Current Connector – no external balance wires Requires a Traxxas iD charger for proper, safe charging Premium low-resistance cells for maximum punch 12-gauge flexible Maxx Cable wiring Oversized cell tabs for improved efficiency Semi-rigid construction for durability and easier pack inspection Center-exit wiring for proper fitment in Traxxas chassis Covered by the Traxxas Lifetime Battery Exchange Program Traxxas iD Charging System Traxxas iD chargers automatically detect your iD battery, set the correct charge parameters, and balance the pack internally — giving you the safest and simplest charging experience in RC.Just plug in and walk away. Specifications Type: LiPo Capacity: 5000mAh Voltage: 11.1V (3-Cell) Continuous Discharge: 25C (125A) Burst Discharge: 50C (250A) Watt Hours: 55.5Wh Charge Rate: 1C (5A) Max Charge Rate: 2C (10A) Dimensions: 155 × 26 × 44 mm Weight: 13.3 oz (376 g) Connector: Traxxas iD High-Current Includes (1) Traxxas 3S 5000mAh LiPo Battery (2872X) ⚠️ Charging Safety This battery MUST be charged with a Traxxas iD charger.Do not attempt to charge with non-Traxxas chargers, balance boards, or adapters. Doing so can result in fire, damage, or voided warranty.

Read more less

⚡ Unleash the Full Potential of Your Traxxas Ride This Traxxas 2S 5000mAh LiPo battery with iD connector is built to deliver powerful punch and extended run time for your favorite Traxxas vehicles. Designed for maximum performance, this 25C battery gives you the acceleration, speed, and reliability you demand — all with the convenience of the Traxxas iD system for easy, foolproof charging. 🔋 Battery Specs: Type: LiPo Capacity: 5000mAh Voltage: 7.4V (2S) Discharge Rate: 25C Length: 137mm Width: 43mm Height: 24mm Weight: 9.9oz ✅ Features: Certified Traxxas iD-equipped for safe, easy charging Engineered for high performance and extended run time Fits Traxxas models perfectly — no modifications needed Delivers the power needed for peak speed and acceleration

Read more less

Traxxas 4mm Aluminum Flanged Serrated Locknuts (4-Pack) Part #: 1747G / 1747R / 1747T / 1747A / 1747PAvailable Colors: Green, Red, Blue, Black, Purple Add both function and flair to your RC build with Traxxas Aluminum 4mm Flanged Locknuts! These serrated, anodized locknuts offer a lightweight, high-strength upgrade that resists loosening from vibration—perfect for racers and bashers alike. 📦 Includes: (4) 4mm Aluminum Flanged Serrated Locknuts (choose color) ✅ Features: CNC-machined from lightweight 6061-T6 aluminum Anodized finish for brilliant color and corrosion resistance Serrated flange helps grip plastic or metal surfaces securely Adds a high-performance, custom look to your RC rig Fits standard 4mm threaded axles and components Compatible with most Traxxas 1/10 scale vehicles 🎨 Dress up your build and lock in performance—available in multiple colors to match your style!

Read more less

Power up your ride with serious runtime and punch! The Traxxas Power Cell 7600mAh 2S LiPo delivers high-capacity performance with rugged construction and easy plug-and-go charging through the Traxxas iD system. 🔋 7.4V / 7600mAh / 25C Continuous🔌 iD Connector for safe, simple charging🔥 Max Burst Rate: 50C (380A)⚡ Maxx Cable 12AWG wiring for low resistance🏁 Optimized fit for Traxxas models like Slash & Slash 4x4💡 Semi-rigid construction – no hard case needed Dimensions: 155x27x43mmWeight: 390g ⚠️ Note: Must be charged with a Traxxas iD charger only. The go-to battery for racers and bashers who want dependable power, long runtimes, and Traxxas factory fit and finish.  

Read more less

Oil, shock (60 wt, 700 cSt, 60cc) (silicone)

Read more less

Traxxas Titan 550 Size Motor (12T) – Part #3785🔥 Big Power. Bold Performance. The Traxxas Titan 12T 550 Brushed Motor delivers massive torque and reliable performance for your RC adventures. Whether you're tearing up trails or bashing in the backyard, this motor is built to handle the heat—literally—with an integrated cooling fan that helps extend run times and reduce wear. A perfect drop-in replacement for Traxxas models using a 12-turn brushed motor. ✅ High-torque 550 size brushed motor✅ 12-turn design for powerful acceleration✅ Built-in cooling fan for longer run times✅ Factory-installed leads for easy installation✅ Ideal replacement for many Traxxas 1/10 scale vehicles 📦 Includes: (1) Titan 550 12T Brushed Motor 💡 Pro Tip: For best results, pair with the Traxxas XL-5 ESC and a properly geared transmission to balance speed and runtime.  

Read more less

Keep your rear suspension solid with these replacement stub axle carriers from Traxxas! Designed for VXL models, these carriers mount directly to the rear suspension arms and provide critical support for your axle stubs. 🔧 OEM-quality replacement🔧 Fits Traxxas VXL models🔧 Easy install – bolt-on compatibility Includes: 2x Stub Axle CarriersPart Number: 3752 Perfect for getting your Traxxas ride back in action or keeping a spare set on hand!    

Read more less

Traxxas Steering Blocks (2) – VXLPart #: 3736 Keep your front end running strong with these genuine Traxxas replacement steering blocks. Designed to fit Traxxas 2WD vehicles, including VXL models, these steering blocks mount to the front uprights and support the front axles for smooth, responsive steering. Features: Durable OEM replacement parts Supports front axle for precise steering Compatible with Traxxas 2WD models like Rustler, Stampede, and Slash Direct fit – no modifications required Includes: (2) Steering Blocks

Read more less

Traxxas 5x11x4mm Ball Bearings (2) – Part 5116Smooth Operation. Built to Last. The Traxxas 5x11x4mm Ball Bearings are a direct replacement for worn-out or damaged bearings in a variety of Traxxas vehicles. Designed for low-friction rotation and long-lasting performance, these bearings are perfect for keeping your drivetrain, hubs, or transmission running like new. ✅ Includes 2 ball bearings✅ Size: 5x11x4mm – fits many Traxxas applications✅ Precision construction – reduces rolling resistance and wear✅ Great for wheels, transmissions, and steering systems✅ OEM replacement quality – trusted fit and durability 📦 Includes: (2) 5x11x4mm Ball Bearings Part #: 5116 💡 Pro Tip: Replace bearings in pairs for balanced performance and reduced vibration.

Read more less

Tougher. Stronger. Built to Bash.The Traxxas 6852X Heavy Duty Rear Driveshaft Assembly is the perfect upgrade or replacement for your Stampede 4X4. Engineered for high-torque brushless power systems, this driveshaft is built to handle extreme terrain and aggressive driving. With factory-assembled convenience, this heavy-duty shaft delivers maximum durability and performance right out of the package—no extra tools or parts required. Features: Designed for high-strength and long-lasting performance Compatible with Traxxas Stampede 4X4 (rear, left or right) Pre-assembled and ready to install Handles powerful brushless setups with ease Includes: (1) Fully Assembled Rear Heavy Duty Driveshaft Beef up your drivetrain and get back to doing what your Stampede 4X4 was made for—conquering everything in its path.

Read more less

Oil, shock (30 wt, 350 cSt, 60cc) (silicone)

Read more less

Ready to bash. Built to last.Keep your Traxxas Rustler® 4X4 running strong with the Rear Extreme Heavy Duty Driveshaft Assembly (6852A) — the factory-assembled replacement that delivers serious strength and performance. Designed to handle the torque and punishment of extreme off-road driving, this driveshaft ensures smooth, consistent power delivery every time you hit the throttle. Factory Fit. Heavy Duty Performance.Each assembly comes pre-built and ready to install on either side of the rear chassis. The high-strength materials and precision construction make it perfect for high-power brushless systems and rough terrain use. Includes a screw pin for a quick, secure installation. 💪 Features: Genuine Traxxas heavy-duty replacement part Handles high torque and rough terrain with ease Factory-assembled for quick, hassle-free installation Fits left or right side of the rear chassis Includes screw pin for secure mounting 📦 Includes: (1) Pre-Assembled Rear Driveshaft (1) Screw Pin ✅ Compatibility: Traxxas Rustler® 4X4 Traxxas Stampede® 4X4  

Read more less

Traxxas EZ-Peak Dual Completer Pack w/ Two 2S 7600mAh LiPo Batteries – TRA2991🔥 The ultimate power bundle for your Traxxas rig! Whether you’re bashing or racing, the EZ-Peak Dual Completer Pack gives you everything you need to charge fast and drive longer. This kit includes the Traxxas EZ-Peak Dual 100W Multi-Chemistry Charger and two 7600mAh 2S 25C Power Cell LiPo batteries with iD connectors — ready to deliver serious run time and simplicity in one package. ⚡ EZ-Peak Dual Charger Features: 💯 100W output for up to 8A charge rate 🔌 Charges two batteries at once (LiPo & NiMH, 2S–3S) 🔍 iD® Auto Battery Identification – just plug in and press start 🔧 Advanced Mode for non-iD batteries ✅ No balance leads needed for iD LiPos 🌍 AC Powered – Plug into any 100–240V outlet 📏 Size: 176 x 138 x 57mm⚖️ Weight: 575g 🔋 Power Cell 7600mAh 2S LiPo Batteries (x2): Voltage: 7.4V Capacity: 7600mAh Discharge: 25C Continuous / 50C Burst Connector: Traxxas iD Charge Rate: Up to 2C (15.2A max) Dimensions: 155 x 27 x 43mm Weight: 13.8oz (390g) each 📦 Includes: (1) Traxxas EZ-Peak Dual Charger (TRA2972) (2) 7600mAh 2S 25C LiPo Batteries (TRA2869X) 💡 Perfect for Traxxas vehicles that run one or two 2S LiPo batteries✅ Ideal for: Slash VXL, Rustler VXL, Bandit VXL, E-Revo 2.0, and more!

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Traxxas 12mm Hex Stub Axle Pin & Collar Set Part #: 1654 | Replacement Wheel Hub Set The Traxxas 1654 Stub Axle Pin & Collar Set is a direct replacement for worn or lost hex hubs and axle pins on a wide range of Traxxas vehicles. This kit includes two 12mm hex wheel hubs and four axle pins, ensuring a secure fit for your wheels and reliable power transfer to the ground. 📦 Includes: (2) 12mm Hex Wheel Hubs (4) Stub Axle Pins ✅ Compatibility: Fits most Traxxas 1/10 scale vehicles with 12mm hexes Commonly used in Slash, Rustler, Stampede, and others Always refer to your model’s manual to confirm compatibility.

Read more less

Traxxas EZ-Peak® Plus Charger – 4A NiMH/LiPo w/ iD® Auto Battery Detection Fast, Safe, Smart Charging for Traxxas Batteries The Traxxas EZ-Peak® Plus 4-Amp Charger is the perfect solution for hobbyists looking for simplicity, speed, and safety. Featuring iD® Auto Battery Identification, this charger automatically configures the optimal charge settings for any Traxxas iD-equipped battery—just plug it in and press start! ⚙️ Features: ⚡ Charges 5–8 Cell NiMH or 2S–3S LiPo Traxxas iD® Batteries 🔍 iD® Auto Battery Detection – No settings to adjust or balance plugs to connect 🔒 Built-in Safety Features – Protects against overcharging and short circuits 🔥 4-Amp Fast Charging – Get back on the track quicker 🧠 Advanced High-Resolution Peak Detection – Ensures full, safe charging every time ✅ Simple One-Button Operation 🔌 Compatible Battery Types: NiMH: 5–8 cells (6.0V–9.6V) LiPo: 2S–3S (7.4V–11.1V)Traxxas iD®-equipped batteries only 📦 Includes: (1) Traxxas EZ-Peak® Plus 4A NiMH/LiPo Charger (2970) (1) Power cord Spend less time charging and more time driving—perfect for beginners and pros alike!

Read more less

Traxxas Front Extreme Heavy Duty Driveshaft – Rustler 4X4 – Part 6851ABeefed-Up Strength. Bolt-On Simplicity. The Traxxas 6851A Extreme Heavy Duty Front Driveshaft Assembly is built to handle high-power brushless setups and intense off-road abuse. Pre-assembled and ready to drop in, this driveshaft fits either the left or right front side of your Rustler 4X4. ✅ Fits front left or right side – fully interchangeable✅ Extreme Heavy Duty design – upgraded strength over stock✅ Fully assembled for fast installation✅ Ideal for high-torque applications and heavy bashing✅ Includes screw pin for secure mounting 📦 Includes: (1) Assembled Front Driveshaft (Left or Right) (1) Screw Pin Part #: 6851A Fits: Rustler 4X4 Rustler 4X4 VXL Also compatible with Slash 4X4, Stampede 4X4, and others using the Extreme HD upgrade system 💡 Pro Tip: Upgrade all four corners with Extreme HD shafts for a bulletproof driveline that’s ready for anything.

Read more less