The Team Losi Racing 22X AC Sway Bar Link Set (TLR-1112) is a replacement sway bar linkage set designed for the TLR 22X 2WD buggy platform. These links connect the sway bar system to the suspension, helping maintain consistent chassis balance and improved cornering stability. Built to OEM specifications, this set is perfect for replacing worn components or refreshing your suspension setup to keep your buggy performing at its best on the track. Features• Genuine Team Losi Racing replacement part• Designed for the TLR 22X 2WD buggy platform• Maintains proper sway bar operation and suspension balance• Ideal for maintenance, repairs, or race-day spares Includes• (1) AC Sway Bar Link Set  

Read more less

Protect your chassis and keep it looking factory fresh with the Team Losi Racing 22X Pre-Cut Chassis Protective Sheet. Designed specifically for the 22X platform, this peel-and-stick protector helps guard against scratches, scuffs, and wear from racing and practice—especially on abrasive track surfaces. Features & Benefits: Precision cut for a perfect fit on the TLR 22X chassis Durable surface protection against scrapes and wear Helps preserve chassis appearance and long-term performance Clean, professional look with official TLR branding Easy application that stays securely in place Includes: (1) 22X Pre-Cut Chassis Protective Sheet (Black) A simple upgrade that keeps your 22X protected and looking sharp race after race.  

Read more less

Restore strength and precision to your 22X with the Team Losi Racing Top Bridge Plate & Bulkhead Set. This genuine replacement set is designed specifically for the 22X 2WD buggy platform and is ideal for repairs, rebuilds, or keeping spares on hand. Features & Benefits: Genuine Team Losi Racing replacement components Maintains proper front-end alignment and chassis rigidity Precision-molded for correct fit and reliable performance Includes: (1) Top bridge plate (1) Bulkhead (1) Bulkhead brace Perfect for keeping your 22X dialed in and race-ready after hard racing or trackside impacts. ✅ Compatibility Losi 22X Losi 22X-T

Read more less

The Team Associated 92417 Rear Wing & Body Mounts Set is a direct replacement designed for the RC10B7 1/10-scale buggy platform. This set restores proper rear wing positioning and body mounting alignment, making it ideal for repairs, rebuilds, or keeping race-day spares on hand. Manufactured to factory specifications for precise fit and durability. 🔧 Features Genuine Team Associated replacement parts Direct-fit rear wing and body mounts Maintains proper wing height and body positioning Ideal for maintenance, rebuilds, or race prep 📦 Includes (1) Rear Wing Mount (2) Rear Body Mounts ✅ Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

Upgrade your drivetrain with this optional set of TLR 22X-4 68mm CVA Driveshaft Bones. Precision-engineered for the front/center position, these driveshafts deliver smoother power transfer, improved durability, and consistent performance lap after lap—perfect for serious racers looking for reliability and precision. 🔧 Features:✅ 68mm CVA driveshaft bones for front/center position✅ Designed for optimized durability and power delivery✅ Precision machined for smooth, consistent operation✅ Ideal for high-performance race setups 📦 Includes:• (2) 68mm CVA Driveshaft Bones 🚗 Compatibility:• Losi 22S Sprint• Losi 22X• Losi 22X-4• Losi 22X-4 Elite Dominate the track with smoother handling and added strength—this is a must-have upgrade for your Losi race platform!

Read more less

Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478 Factory-Precision Suspension Mount for the RC10B7 The Factory Team Standard Height Ballstud Mount is a durable, performance-focused upgrade for your RC10B7 platform. Crafted from CNC-machined aluminum and finished in stealth black, it delivers consistent rear camber link geometry with improved strength and tuning potential. ⚙️ Features: ✅ Standard Height – Maintains factory camber link geometry ✅ CNC-Machined Aluminum – Lightweight and built to last ✅ Black Anodized Finish – Sleek and stealthy Factory Team look ✅ Reliable Upgrade – Improves rear-end durability and tuning flexibility 📦 Includes: (1) Black Aluminum Ballstud Mount (Standard Height) Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7 🏁 A must-have for racers seeking durable, factory-style performance with a sleek, blacked-out look.

Read more less

Team Associated RC10B7 FT Ballstud Mount +2mm, Blue Aluminum – ASC92477 Precision Suspension Tuning for the RC10B7 The Factory Team +2mm Ballstud Mount is a premium upgrade for serious racers. Machined from lightweight aluminum and anodized in signature blue, this mount allows for fine-tuning of rear camber link geometry, improving handling and cornering stability on the track. ⚙️ Features: ✅ +2mm Height – Raises rear camber link mount for improved roll center adjustment ✅ CNC-Machined Aluminum – Durable and lightweight ✅ Blue Anodized Finish – Factory Team look and corrosion resistance ✅ Increased Setup Options – Perfect for dialing in rear-end grip and handling on high-traction surfaces 📦 Includes: (1) +2mm Blue Aluminum Ballstud Mount Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Ideal for racers looking to fine-tune rear suspension geometry for high-performance setups.

Read more less

Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74.1 Anti-Roll Bar Set (1.4–1.7mm) – 92290📏 Dial In Your Roll Game! Fine-tune your handling like a pro with this optional anti-roll bar set for your RC10B74.1 or B74.1D. Whether you're dialing in for high-bite tracks or looking for more stability in the corners, this set gives you the range you need to dominate. 💪 Key Benefits:✅ Includes 1.4, 1.5, 1.6, and 1.7mm sway bars✅ Smoother cornering and better chassis balance✅ Essential tuning option for competitive 4WD racers✅ Designed to fit the RC10B74.1 and B74.1D platforms 🔧 Includes:• (1) 1.4mm Sway Bar• (1) 1.5mm Sway Bar• (1) 1.6mm Sway Bar• (1) 1.7mm Sway Bar 📦 Part Number: 92290🏁 Brand: Team Associated  

Read more less

Team Associated RC10B74.2 Front Gullwing Suspension Arms. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one left front gullwing suspension arm, one right front gullwing suspension arm and two arm spacers. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B7 Factory Team Carbon Side Rails. Constructed from AE legendary carbon composite material, these optional side rails are intended for the Team Associated RC10B7 1/10 buggy to stiffen the chassis and eliminate flex as a tuning option for high bite surfaces. Package includes two side rails. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Spektrum RC XBC100 Smart Battery Cell Checker & Servo Driver – SPMXBC100The Ultimate Smart Pit Tool The Spektrum XBC100 is more than just a battery checker—it's your all-in-one smart tool for RC diagnostics, model setup, and mobile charging. Designed for drivers and pilots alike, this compact device brings together battery analysis, balancing, servo testing, and even mobile USB charging into a single, powerful unit. Whether you're balancing LiPos, fine-tuning servos, or checking data from your Smart battery, the XBC100 delivers it all on a bright, full-color display with intuitive touch controls. The built-in Qualcomm 3.0 USB charger port adds convenience by powering your smartphone or Spektrum Smart transmitter when you're on the go. ✅ Built-in cell balancer for LiPo battery maintenance✅ Smart Battery compatibility for in-depth data readout✅ Integrated advanced servo tester with PWM output✅ Full-color IPS display – visible even in sunlight✅ Quick Charge USB port for Android/iOS devices✅ Touchscreen interface for quick adjustments✅ Update-ready for future features via USB 📦 Specifications: Part Number: SPMXBC100 Display: Full-color IPS LCD Functions: Battery checker, balancer, servo tester, Smart battery interface USB Output: Qualcomm 3.0 Quick Charge (up to 12V/2A) Smart Features: View cycle count, temp, status, and configure Smart LiPo settings Update Port: Yes Compatibility: Spektrum Smart Batteries, standard LiPo packs, RC servos The XBC100 belongs in every pit bag. Whether you’re at the track or in the field, it’s your portable tech assistant for tuning, troubleshooting, and charging with total control.  

Read more less

 ⚡ Sensored Precision. Castle Power. Waterproof Performance. Take your mini-scale RC to the next level with the Castle Creations Mamba Micro X2 Brushless Combo. Featuring the powerful 1007-6350Kv Sensored Brushless Motor paired with the legendary Mamba Micro X2 ESC, this system delivers ultra-smooth throttle response, incredible efficiency, and race-proven reliability for 1/14 and 1/16 scale vehicles. Whether you're crawling technical terrain, racing on the track, or launching hard off the line, the Mamba Micro X2 provides the precision, power, and tunability that Castle Creations is known for. ⚡ Features: 🔥 Powerful 6350Kv 4-pole sensored brushless motor⚙️ Sensored and sensorless operation capability💧 Waterproof ESC design for all-weather driving📱 Castle Link programmable via USB or optional Bluetooth adapter📊 Built-in data logging and telemetry support🚀 CRYO-DRIVE technology improves efficiency and reduces heat🔧 Adjustable external 10-amp BEC included📡 Auxiliary wire functionality for on-the-fly tuning adjustments🔔 Audible alerts for diagnostics and setup assistance🏁 Exceptional throttle control and ultra-smooth starts ⚙️ Mamba Micro X2 ESC Specifications: Input Voltage: 2S–4S LiPo (16.8V Max)BEC Output: 5.5V or 7.5V AdjustableWaterproof: Yes*Reverse: Yes (can be disabled)Brake: ProportionalCooling Fan: Not IncludedDimensions: 41.6 x 29.4 x 21.3mmWeight: 47gMotor Connectors: 3.5mm Bullet Connectors ⚙️ 1007-6350Kv Motor Specifications: Kv Rating: 6350KvInput Voltage: 2S–3S LiPoMaximum RPM: 80,000Diameter: 28mmLength: 50.3mmWeight: 114.8gShaft Diameter: 3.17mm (1/8")Connectors: 4mm Male Bullets 🚀 Advanced Castle Technology: ⚡ QUIETSENSE sensor technology for ultra-precise motor synchronization🛡️ Flux Shield design minimizes sensor interference🔥 Improved 4-pole, 12-slot motor design for greater efficiency and lower temperatures📈 Data logging for advanced performance analysis📲 Compatible with Castle Link software and Castle Link mobile app📡 Telemetry ready for supported Futaba radio systems 📦 Includes: (1) Castle Creations Mamba Micro X2 ESC(1) Castle Creations 1007-6350Kv Sensored Brushless Motor(2) Motor Sensor Harnesses(1) Quick Start Guide(1) Castle Decal Sheet 🔧 Compatibility: Axial Yeti Jr.LaTrax TetonLosi Mini-T 2.0Traxxas 1/16 RallyMany 1/14 and 1/16 scale vehicles up to approximately 2.75 lbs ⚠️ Important Notes: 🔋 ESC supports 2S–4S LiPo batteries🔋 Motor is recommended for 2S–3S LiPo operation🔧 Battery connector must be installed separately🌡️ Monitor motor and ESC temperatures and keep below 180°F💧 Waterproof design is not intended for full submersion 💡 Pro Tip: For racers, the sensored setup delivers smoother launches and more predictable throttle control. For crawlers, the precise low-speed operation and incredible torque make technical climbs easier and more controllable than traditional sensorless systems. 🏁🔥

Read more less

The Team Associated Factory Team Carbon Front Suspension Arms for the RC10T7 and RC10SC7 are a high-performance upgrade designed to increase rigidity and improve suspension consistency under demanding racing conditions. Built using AE’s legendary carbon composite material, these arms reduce flex found in standard suspension components, resulting in more precise handling and predictable performance on the track. Engineered as part of the Factory Team lineup, these arms deliver race-proven strength and durability while maintaining perfect fit and compatibility with the RC10T7 and RC10SC7 platforms. Features Factory Team carbon composite construction Increased rigidity for improved suspension response Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency during high-stress driving Direct-fit Factory Team upgrade Includes (2) Factory Team Carbon Front Suspension Arms Compatibility Team Associated RC10T7 Team Associated RC10SC7 A race-ready suspension upgrade designed for drivers looking for improved precision, durability, and consistency on the track. 🏁

Read more less

Upgrade your buggy with the R1WURKS B7 Battery Mount Set, a lightweight, rigid replacement for the stock plastic mounts. This premium kit includes centered and 1/2 offset mounts, allowing precise battery positioning to fine-tune weight balance and handling for different track conditions. Machined from high-strength 7075-T6 aluminum and paired with carbon fiber battery latches, this system delivers race-grade durability with smooth, secure battery retention. Included low-profile and standard standoffs support a wide range of battery heights, while titanium hardware keeps weight to a minimum. Key Features CNC-machined 7075-T6 aluminum construction Matte black anodized finish with laser-etched R1WURKS branding Centered and 1/2 offset mounts for battery position tuning Carbon fiber battery latches for strength and weight savings O-ring latch friction feature for smooth operation and secure hold Supports low-profile and standard-height batteries Lightweight titanium mounting screws included Includes (4) R1WURKS M3×8 Titanium Button Head Screws (2.5mm hex) (2) M3×6 Flat Head Screws (4) M3×8 Flat Head Screws (2) Black Aluminum Countersunk Washers (2) 6×4×1 NBR Rubber O-Rings (2) Black Aluminum Low-Profile Standoffs (2) Black Aluminum Standard Standoffs (2) Carbon Fiber Battery Latches (1) 1/2 Offset Mount A (1) 1/2 Offset Mount B (2) Centered Offset Mounts Fitment B7 Series (B7 platform) Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. All other trademarks are the property of their respective owners. A clean, adjustable battery mounting solution built for racers who want precision balance, lighter weight, and pro-level durability. 🏁  

Read more less

Protect critical components on your buggy with the Team Losi Racing Shock Tower Guards, Upper Wing Mount, and Spur Shield Set. Designed specifically for the TLR 22X platform, this set helps shield the shock tower, wing mount area, and spur gear from debris and impact damage during racing. Ideal for maintaining durability and reliability over long race days, these guards help extend component life while keeping your drivetrain and suspension protected in demanding track conditions. Features: Protects shock tower and upper wing mount Integrated spur gear shielding Helps prevent damage from debris and impacts Designed for race-level durability Compatibility: Team Losi Racing 22X Includes: Shock Tower Guards Upper Wing Mount Protection Spur Shield Part Number: TLR-1104

Read more less

The Team Losi Racing TLR-1075 Bulkhead and Kick Shims Set is a direct replacement designed for the 22X 2WD buggy platform. This set restores proper front-end geometry and durability, making it ideal for maintenance, rebuilds, or race prep. Manufactured to exact factory specifications, this bulkhead and shim set ensures correct kick-up angle and consistent suspension alignment. 🔧 Features Genuine Team Losi Racing replacement parts Direct-fit bulkhead for 22X platforms Includes kick-up shims for proper front suspension geometry Ideal for repairs, rebuilds, or race-day spares 📦 Includes (1) Bulkhead (2) Kick-Up Shims ✅ Compatibility Losi 22X Losi 22X-T

Read more less

📡 Unlock FlySky Control for Your Mini-Z EVO! The Kyosho FlySky Noble Mini-Z EVO Receiver lets you take full advantage of FlySky’s advanced performance and precision on your Mini-Z platform. Designed specifically for seamless compatibility with FlySky Noble transmitters, this receiver transforms your Mini-Z EVO chassis into a responsive, competition-ready machine. Enjoy smoother throttle response, faster input translation, and a rock-solid connection every time you race. ⚡ Features: Enables use of FlySky Noble transmitters with Mini-Z EVO chassis Provides fast, interference-free AFHDS3 signal performance Plug-and-play installation — no soldering required Designed for maximum response and precision control Compact and lightweight for ideal chassis balance Genuine Kyosho quality and reliability 📦 Includes: (1) Kyosho FlySky Noble Mini-Z EVO Receiver 🔧 Compatibility: Kyosho MR-02 Kyosho MR-03 💡 Pro Tip:Pair with a FlySky Noble NB4+ or NB4+ Pro transmitter for the ultimate precision control setup on your Mini-Z EVO!

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

Keep your RC10T6.2 drivetrain running smooth with these 92.5mm Rear CVA Bones. Built to handle the demands of competitive racing, these precision components deliver efficient power transfer and long-lasting durability on high-performance stadium trucks. 🔥 Key Features: Designed specifically for the RC10T6.2 rear CVA drivetrain 92.5mm length for proper fit and rear suspension geometry Durable steel construction for high-strength performance Factory Team-grade reliability and consistency Ideal for replacing worn or damaged CVA bones ✅ Compatibility: RC10T6.2 May fit other Team Associated vehicles using 92.5mm CVA bone setups—check manual for fitment 📦 Includes: (2) Rear CVA Bones (92.5mm) ⚠️ Tip:Lubricate pivot points and inspect CVA components regularly for wear to extend drivetrain life.

Read more less

Upgrade or replace your worn-out steering components with this genuine Team Associated RC10B74 Steering Bellcranks set. Designed specifically for the B74 platform, these bellcranks are precision-engineered to deliver smooth, accurate steering response on any track. 🔩 Key Features: Genuine Team Associated Factory Team parts Maintains optimal steering geometry Molded composite construction for lightweight durability Perfect fit for high-performance competition builds 📦 Includes: (1) Left Steering Bellcrank (1) Right Steering Bellcrank ✅ Compatibility: Team Associated RC10B74 May also fit other RC10B74-series variants Keep your steering system race-ready with fresh bellcranks designed to meet Factory Team standards.

Read more less

  Keep your wing secure and your rear-end planted with the Team Associated RC10B74 Rear Wing Mount. Designed specifically for the RC10B74 series, this durable wing mount ensures consistent downforce and stability under high-speed cornering and heavy landings. 🔧 Key Features: Durable composite construction Factory Team design and fit Securely mounts the rear wing for improved aerodynamics Lightweight yet strong for competitive racing Direct replacement for stock part 📦 Includes: (1) Rear Wing Mount Assembly ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74-series vehicles (confirm in your manual) Enhance your rear grip and keep your wing locked down with this reliable Factory Team upgrade.

Read more less

Upgrade your RC10B74 buggy with the Factory Team Carbon Rear Suspension Arms from Team Associated. These arms are crafted from lightweight and ultra-rigid carbon composite material, giving racers the precision, consistency, and responsiveness needed to compete at the highest levels. 📌 Key Features: Factory Team carbon construction for reduced weight and added stiffness Increased responsiveness and reduced flex under load Designed for competitive high-traction racing conditions Direct replacement for stock rear suspension arms 📦 Includes: (2) Carbon rear suspension arms (Left and Right) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 Engineered for racers who demand performance and reliability on the track.

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks (Carbon) [91985] 🛠️ Precision Meets Performance 💨 Upgrade your front end with this Carbon -1mm Scrub Caster & Steering Block Set for the RC10B6.4 and B6.4D. Built for racers who want rigidity, adjustability, and the ultimate in high-traction control. Carbon construction = serious stiffness. 🔥 ✅ Rigid carbon for a more responsive suspension✅ Includes multiple caster insert options for fine-tuning✅ -1mm scrub radius for quicker steering feel✅ Built for B6.4 / B6.4D platforms Includes:(2) Carbon Caster Blocks(4) Carbon Steering Blocks(2) +/- 0° Caster Inserts(2) +/- 2.5° Caster Inserts(2) +/- 5° Caster Inserts(2) Shims 📦 Part Number: 91985🚗 Brand: Team Associated

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

This is a replacement Team Associated RC10B74 Hinge Pin Set. 

Read more less

Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474Upgrade your RC10B7 with Factory Team aluminum HRC rear hubs – engineered for strength, precision, and tunability on high-grip tracks. These anodized blue or black hubs feature a high roll center (HRC) design to enhance handling, increased axle height adjustability, and a secondary bearing bore for use with FT universals. Built tough for serious racers who want consistency lap after lap. ✔️ CNC Aluminum for max durability✔️ HRC Design boosts handling on high-traction surfaces✔️ Supports higher axle heights and lower ride heights✔️ Compatible with Factory Team Universals✔️ Anodized in Blue (92473) or Black (92474)✔️ Includes left & right hubs plus mounting hardware✔️ Fits: RC10B7 & RC10B7D Race harder. Corner faster. Stay planted. 🏁  

Read more less

Team Associated RC10B74.2 Battery Mount Set. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes battery mount parts tree, two rubber battery straps and mounting hardware. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Factory Team Carbon Front Gearboxes – RC10B74.2 Tunable Front-End Performance for Changing Track Conditions Unlock precise handling with the Factory Team Carbon Front Gearboxes for the RC10B74.2 and RC10B74.2D. This lightweight carbon-reinforced gearbox set offers both standard and +2mm ride height options, giving racers ultimate flexibility in front-end tuning for varying surfaces and setups. 🔩 Features: 🧱 Lightweight carbon composite material 📏 Includes both standard and +2mm height gearboxes 🔧 Covers included for both gearbox housings 🌀 Comes with sway bar bracket for fine handling adjustments 📦 Includes: (1) Standard Height Front Gearbox w/ Cover (1) +2mm Front Gearbox w/ Cover (1) Sway Bar Bracket ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🎯 Optimize your front-end geometry for maximum track performance.

Read more less