Team Associated RC10B74 Factory Team LTC Metal Differential Rebuild Set. This is an optional part intended for the B74 series of buggies. Includes: (2) Differential side gears (4) Differential Spider gears (2) Outdrive shims (4) Spider gear shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

🏁 Smooth Power. Race-Ready Control. Built for Stock Class. The Cayote Crest Stocki 13.5T motor is designed for racers who need consistent, controllable power within stock class limits. With a sensored design and competition-focused tuning, it delivers the smooth throttle response and reliability needed for tight, technical racing. 🏁 About the Crest Stocki Motor 🎯 Stock Class Performance Built specifically for stock racing, this motor delivers balanced power and control while meeting major racing regulations, making it a dependable option for competitive environments. ⚡ Smooth, Precise Control The sensored system provides clean throttle response and consistent acceleration, helping maintain control through corners and technical sections. 🏎️ Race-Ready Compliance Fully compliant with ROAR, EFRA, and BRCA standards, making it suitable for organized racing at multiple levels. 🔧 Key Features ✔ Sensored brushless motor design✔ Smooth and consistent throttle response✔ Optimized for stock class racing✔ ROAR compliant✔ EFRA approved✔ BRCA approved✔ Competition-tuned performance✔ Adjustable timing 📦 Includes (1) Crest Stocki 13.5T Brushless Motor (1) Sensor Cable 📊 Specifications Application: 1/10 Turns: 13.5T Type: Brushless – Sensored Voltage: 2S LiPo (7.4V) Adjustable Timing: Yes Poles: 2 Connector: Solder Tab Dimensions: 2.04 x 1.41in (51.9 x 35.8mm) Shaft Diameter: 1/8in (3.175mm) Weight: 5.27oz (149.5g) 🏁 Dialed for control. Built for racing. Ready for tech.

Read more less

The Team Associated B7.1 Caster & Steering Blocks Set (92576) is a replacement set designed to restore precise steering performance and front suspension geometry on the RC10B7.1 platform. Perfect for maintenance, rebuilds, or race prep, this set ensures your buggy maintains accurate handling and consistent performance on the track. With multiple steering block options included, racers can fine-tune kingpin inclination (KPI) and steering characteristics to match track conditions and driving preferences. Features• Genuine Team Associated replacement parts• Restores precise steering and suspension performance• Multiple KPI steering block options for tuning• Helps maintain consistent handling and control• Designed specifically for the B7.1 platform Includes• (2) Caster Blocks• (2) 4L/R Steering Blocks (KPI0)• (2) 4L/R Steering Blocks (KPI2)• (2) 3L/R Steering Blocks (KPI0)• (2) 3L/R Steering Blocks (KPI2)    

Read more less

The Team Associated RC10B7.1 Front Suspension Arms (92574) are precision replacement components designed to maintain accurate steering response and predictable handling on the track. These arms play a critical role in supporting consistent front-end geometry, helping drivers maintain control through technical sections and high-speed corners. Engineered specifically for the RC10B7.1 platform, these suspension arms integrate seamlessly with the chassis to deliver reliable performance under competitive racing conditions. Their purpose-built design ensures dependable durability and precise fitment, making them essential for keeping your buggy performing at its best. Features• Optimized steering geometry for improved front-end response• Race-tuned handling balance for consistent performance• Platform-specific design for RC10B7.1• Precision manufacturing for a perfect fit and reliable operation Includes• (1) Left RC10B7.1 Front Suspension Arm• (1) Right RC10B7.1 Front Suspension Arm  

Read more less

The Team Associated RC10T7 and RC10SC7 Rear Suspension Arms are genuine replacement components designed to restore proper suspension performance and durability. Manufactured to factory specifications, these rear arms ensure correct geometry, strength, and consistent handling for your T7 or SC7 platform. Perfect for routine maintenance, race-day repairs, or keeping a spare set in your pit box. Features Genuine Team Associated replacement parts Factory-fit rear suspension arms Maintains proper suspension geometry Durable construction for racing conditions Includes (2) RC10T7 / RC10SC7 Rear Suspension Arms Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 A dependable replacement set to keep your suspension tight, consistent, and race-ready. 🏁  

Read more less

Sticky Kicks RC is proud to introduce the Five Star Ceramic Bearing Sets, engineered for racers who want maximum efficiency, speed, and consistency in their 1/10 scale 2WD cars. If keeping your bearing game #superdialed matters, this is the upgrade. Built with Grade 5 ceramic components and designed to minimize resistance, these bearings deliver ultra-smooth rotation, quicker acceleration, and improved overall drivetrain efficiency—exactly what competitive racers demand. Product Details Designed for 1/10 scale 2WD racing cars Fits current Team Associated, Losi, and X-Ray platforms Lowest resistance, fastest rolling bearings available Grade 5 ceramic construction Extremely lightweight for reduced rotating mass Ideal for high-performance racing and rebuilds A premium ceramic bearing upgrade for racers chasing every last bit of speed and smoothness. 🏁

Read more less

Upgrade your factory steering with the R1WURKS Aluminum Steering Rack, a precision-machined replacement designed to dramatically improve durability, steering precision, and on-track feel. Replacing the stock plastic component with 7075-T6 aluminum delivers tighter response and long-term reliability—without adding weight. At just 2.80 grams, this rack offers race-ready strength in a lightweight package, finished in sleek black anodizing with R1WURKS branding. Key Features Increased durability and precision over stock plastic Sharper steering response and improved feel Ultra-lightweight design: 2.80g CNC-machined from 7075-T6 aluminum Black anodized finish with R1WURKS branding Includes (1) Aluminum Steering Rack (2) 4×6×0.2mm shims Fitment B7 B7.1 B7D T7 SC7 B6.4 B6.4D SC6.4 T6.4 Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. A simple, effective steering upgrade for racers who want precision you can feel—lap after lap. 🏁  

Read more less

The 1up Racing Pro Duty Titanium Turnbuckle Set is engineered specifically for the RC10B7.1, delivering maximum strength with massive weight savings. These turnbuckles weigh ~45% less than steel while maintaining exceptional durability for the most demanding racing conditions. Manufactured from precision-ground centerless 6AL4V Titanium bar stock using Swiss-style CNC screw machines with live tooling and thread rolling, these turnbuckles set a new standard in quality and performance. Each piece features the 1up arrow laser-engraved on all four sides of the center lug for unmistakable authenticity. Key Benefits Roughly 45% lighter than steel turnbuckles Increased strength and durability Improves overall vehicle efficiency and response Designed specifically for the B7.1 platform Features Precision 6AL4V Titanium construction Swiss-style CNC machining with rolled threads Laser-engraved 1up arrow on all four sides Pro-level performance and finish Backed by the 1up Racing Pro Duty Guarantee Includes (6) Pro Duty Titanium Turnbuckles Raw Titanium finish (standard) Finish Options (Optional) Raw Titanium  Blue (+$10) Bronze (+$10) Gold (+$10) Pink (+$10) Installation Notes Use 1up Racing 3.2mm Pro Double-Ended Turnbuckle Wrench Apply a small amount of 1up Racing Gold AW Grease to threads before installation for smooth adjustment Fitment Team Associated RC10B7.1 A premium upgrade for racers who want lighter weight, maximum strength, and precision you can feel on the track. 🏁    

Read more less

Keep your front suspension tight and precise with the Team Losi Racing 22X AC Narrow Caster Blocks. These genuine replacement parts are designed specifically for the 22X AC 2WD buggy platform and are ideal for repairs, rebuilds, or keeping spares in your pit box. Features & Benefits: Genuine Team Losi Racing replacement components Narrow caster block design for proper 22X AC front-end geometry Precision molded for consistent fit and smooth steering action Compatibility: Team Losi Racing 22X AC 2WD Buggy Includes: (2) Narrow caster blocks Perfect for maintaining factory handling and reliability on your 22X AC.  

Read more less

Sharpen Your Steering. Increase Stability. Go Faster. Dial in front-end precision with the Team Associated RC10T7/RC10SC7 Front Anti-Roll Sway Bar Set — a must-have tuning upgrade for racers looking to reduce chassis roll, increase steering consistency, and fine-tune handling for any surface. Whether you're running high-grip carpet, loose dirt, or rough outdoor terrain, this sway bar set helps keep the front of your truck planted and predictable where it matters most. About the Sway Bar Set Versatile Tuning for Any Track The Front Anti-Roll Sway Bar Set gives you multiple bar thickness options so you can tailor front-end stability to match your track conditions and driving style. ✔ Thicker bar = more stability, smoother steering✔ Thinner bar = more steering rotation This lets you quickly tune steering response, reduce traction rolling, and achieve a balanced, confidence-inspiring setup. Features Three sway bar sizes for fine-tuned handling Reduces chassis roll for improved front-end consistency Boosts steering stability on tight, loose, or bumpy tracks A must-have in any race-day tuning kit Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Front Anti-Roll Sway Bar Set (multiple bar thicknesses)

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Dial in your suspension with Team Associated’s Factory Team 13mm shock pistons. The #91933 set features 2x1.7mm holes with a 2.5mm thick profile, providing a great tuning option for refining pack and rebound on modern high-performance off-road tracks. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.7mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined for ultra-precise damping consistency Designed for 13mm shock bodies used on AE’s latest platforms Ideal for high-traction surfaces needing tighter shock control Compatible with RC10B6.4, RC10B74.2, and similar vehicles 📌 Tuning Tip: Use 2x1.7mm pistons to increase damping over 2x1.8mm, providing more pack and control in bumpy or high-speed corners.

Read more less

Complete your sway bar setup or replace worn components with this genuine RC10B74 Anti-Roll Bar Hardware Set from Team Associated. Designed specifically for the B74 series, this hardware kit ensures your anti-roll bars function smoothly and securely. 🔧 Key Features: OEM replacement hardware for RC10B74 anti-roll bar system Includes mounting pieces and fastening components Precision fit for secure and reliable installation Ideal for fresh builds or routine maintenance 📦 Includes: Anti-roll bar mounting hardware (exact contents may vary) ✅ Compatibility: RC10B74 May fit other B74 platform variants with anti-roll bar setups Maintain consistent suspension balance and performance—use the right hardware for the job with this official Team Associated upgrade.

Read more less

The XRAY XB2 Graphite Front Suspension Arm (Right, Short, Low Shock Mounting) is crafted from graphite composite material to deliver the perfect balance of strength, stiffness, and responsiveness. The short design improves steering response and corner speed, while the low shock mounting provides increased stability on high-traction tracks. Features: Graphite composite material for enhanced stiffness and precision Short design improves steering response and agility Low shock mounting (LSM) for greater stability and cornering performance Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

🔧 Strong, Precise, Race-ReadyThe Team Associated RC10B84 Front Suspension Arms are precision-molded replacement components built to handle the rigors of competitive racing. Designed specifically for the B84 platform, these arms deliver the perfect balance of strength, flexibility, and lightweight performance to maintain consistent handling and durability under extreme conditions. ⚙️ Features: ✅ Direct fit replacement for RC10B84 ✅ Molded composite construction for durability and controlled flex ✅ Maintains proper suspension geometry for predictable handling ✅ Perfect for racers needing fresh arms or spares 📦 Includes: (1) Pair of Front Suspension Arms  

Read more less

🏆 Stronger, Straighter, FasterThe “A” Arm Mount for the RC10B84 is a precision CNC-machined aluminum upgrade that replaces the stock plastic piece. Built to handle the toughest racing conditions, this mount locks in suspension geometry for consistent camber and toe, helping your buggy track straighter and corner sharper. ⚙️ Features: ✅ CNC-machined aluminum for superior durability ✅ Precision hinge-pin alignment ensures consistent suspension setup ✅ Anodized finish resists wear and adds a pro look ✅ Direct replacement for the stock “A” mount 📦 Includes: (1) RC10B84 “A” Arm Mount 💡 Pro Tip: Combine the A, B, and C aluminum arm mounts for a fully upgraded rear suspension package — maximizing both strength and precision.  

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 13mm Rear Shock Spring (Grey/2.55lbs) (72mm) [71165] 🛞 Smoother landings. Better cornering. Upgrade your suspension game with these 13mm Rear Shock Springs from Team Associated. Designed for the T6.2 and SC6.2 when equipped with 13mm shocks, these springs deliver a plush low-speed response while still offering the support you need for big jump landings. It’s the best of both worlds—smooth over the bumps, firm on the hits. 🔥 Features:✅ Grey rate: 2.55 lbs/in✅ Length: 72mm✅ Optimized for 13mm shocks✅ Delivers soft feel with firm pack✅ Includes 2 springs 📦 Part Number: 71165🏁 Brand: Team Associated

Read more less

Team Associated 13mm Shock Spring Cup Set [91966] 🌀 Fine-Tune Your Ride Height in Seconds! Dial in your suspension setup with this 13mm Shock Spring Cup Set from Team Associated. Whether you're going low or keeping it high, this kit includes 0mm, 5mm, and 9mm cups—giving you full control over ride height and spring preload. 🛠️ ✅ Fits 13mm shocks✅ Includes 0mm, 5mm, and 9mm cups✅ Perfect for on-the-fly tuning✅ Durable and precision-molded Includes:(4) 0mm Spring Cups(4) 5mm Spring Cups(4) 9mm Spring Cups 📦 Part Number: 91966🚗 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74.2 0 and 2mm Front Gearboxes. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one 0mm height front differential gearbox with cover and one 2mm height front differential gearbox with cover. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

1up Racing Pro-RX FH4 2.4GHz Receiver – Sanwa-Compatible, High-Performance & Affordable! Upgrade your RC setup with the 1up Racing Pro-RX FH4 2.4GHz Receiver—a high-performance yet cost-effective alternative to Sanwa FH4 receivers. Endorsed by 1up Racing Factory Drivers, this receiver has been rigorously tested to deliver the same level of reliability and responsiveness as its premium counterparts, making it the go-to choice for serious racers. Key Features: ✅ Supports Normal, SSR, and SHR Channel Response Modes – Ensures smooth and ultra-responsive performance.✅ 4-Channel Receiver – Provides versatile control for advanced RC setups.✅ Ultra-Lightweight Design (7g) – Compact and minimal weight impact for race-ready performance.✅ Small Footprint (28x20.5x18.5mm) – Fits easily in tight spaces without compromising functionality.✅ Wide Voltage Input (3.5V-8.4V) – Compatible with a range of power sources.✅ Includes Protective Foam-Lined Case & Bind Plug – Keeps the receiver safe and secure when not in use. Compatible With: The 1up Racing Pro-RX FH4 Receiver works flawlessly with the following Sanwa transmitters:✔ Sanwa EXCES Z / EXCES ZZ✔ Sanwa M11X / M12 / M12-RS / M12-S✔ Sanwa M17✔ Sanwa MT-4 / MT-4S / MT-44 / MT-S ⚠️ Note: Antenna-free receivers sacrifice extended range. If you require maximum range, consider a receiver with an external antenna. In the Box: (1) 1up Racing Pro-RX FH4 2.4GHz Receiver (1) Protective Foam-Lined Case (1) Bind Plug (1) Instruction Manual Reliable. Responsive. Race-Ready. The 1up Racing Pro-RX FH4 is built for competitors who demand precision control, reliability, and affordability. Whether you're replacing an existing receiver or upgrading your setup, this Sanwa-compatible receiver delivers elite performance without the premium price tag. 🔥 Upgrade today and take your racing experience to the next level! 🏁💨

Read more less

Pro-Motion 2.2" 2WD Front Slim Carpet Buggy Wheels (4)Available in Yellow (3080-Y) or White (3070-W) Precision on the Carpet. Built for Grip. Dial in your buggy for high-traction carpet tracks with Pro-Motion’s 2.2" Slim Front Wheels. These lightweight wheels are engineered with a reinforced inner rib design to reduce flex without adding unnecessary weight. The tough plastic construction holds up under pressure, while integrated vent holes keep performance sharp through long mains. ✅ Perfect fit for 2WD front carpet setups✅ Slim profile design tailored for high-grip surfaces✅ Ultra-lightweight ribbed structure for strength without bulk✅ Built-in vent holes reduce tire ballooning✅ Available in bright Fluorescent Yellow or Clean White✅ Includes 12mm hex mounting 📦 Includes:(4) 2.2" Slim Front Carpet Buggy Wheels (choose Yellow or White) 💡 Pro Tip: Pair with low-profile carpet tires for the ultimate precision and responsiveness on tight indoor layouts.

Read more less

Team Associated 5.5x0.5mm Aluminum Ball Stud Washers – Blue (10) – Part 31381Precise Tuning. Clean Looks. Universal Fit. The Team Associated 5.5x0.5mm Aluminum Ball Stud Washers (31381) are a must-have for fine-tuning suspension geometry and roll center adjustments. With a small outside diameter and anodized blue finish, these lightweight washers are ideal for 1/10 scale vehicles, especially touring and on-road setups. ✅ Pack of 10 precision-machined washers✅ 5.5mm outer diameter / 0.5mm thickness✅ Made from lightweight aluminum – won't add unwanted weight✅ Blue anodized finish – clean, pro-level look✅ Perfect for ball stud spacing and suspension tuning✅ Fits all 1/10 scale vehicles – off-road or on-road 📦 Includes: (10) 5.5x0.5mm Blue Aluminum Ball Stud Washers Part #: 31381 💡 Pro Tip: Use multiple washers to stack for exact suspension height or link angle adjustments.

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

🏁🎯 Precise Front-End Grip for Carpet & Turf Racing The JConcepts Pin Swag Slim 2.2" 2WD Front Buggy Tires combine two proven JConcepts tread concepts to deliver responsive steering and predictable front-end grip on carpet and Astroturf racing surfaces. Designed specifically for 1/10 scale 2WD buggy front applications, the Pin Swag Slim blends Swagger-style outer tread elements with a dense field of round pins for a balanced, confident feel. A low-profile carcass helps the buggy transition smoothly through corners while maintaining stability at both high and low speeds. 🏎️ About the Pin Swag Slim 🔥 Hybrid Pin Swag Tread The Pin Swag combines Swagger-inspired outer lugs with densely arranged round pins to provide a balance of steering response, forward bite, and control. The crisp pins feature a substantial base for stability while maintaining the precision needed on high-grip surfaces. 🎯 Built for 2WD Front-End Control A split center section allows additional tread flexibility and surface conformity, while staggered tread elements and a vertical rib help sharpen steering response. The sidewall transitions into a steering-focused ledge for added cornering control. ⚡ Low-Profile Carcass The low-profile design helps reduce unwanted tire movement during quick direction changes, giving racers a more direct and predictable feel through technical carpet layouts. 🪶 Lightweight Bead Design JConcepts uses an ultra-light scalloped tire bead to help reduce rotating weight and make alignment easier during mounting and gluing. 🔧 Features Designed for 1/10 2WD buggy front applications Optimized for carpet and Astroturf racing Low-profile carcass for quick, smooth transitions Pin and Swag combination tread Dense round-pin layout Split center section for added surface conformity Staggered tread elements for directional bite Vertical rib helps sharpen steering response Steering-focused sidewall ledge Scalloped bead helps reduce rotating weight Purple compound 2.2" mounting bead 📦 Includes (2) JConcepts Pin Swag Slim 2.2" 2WD Front Buggy Tires – Purple 📊 Specifications Specification Details Brand JConcepts Part Number 3181-011 Product Type 2WD Front Buggy Tires Scale 1/10 Wheel Size 2.2in Compound Purple Position Front Application 2WD Buggy Surface Carpet / Astroturf Quantity 2 Tires Note: Wheels are sold separately. Designed to fit compatible slim 2.2" 2WD front buggy wheels, including JConcepts Mono Slim Front Wheels (#3376).  

Read more less

The Team Associated Factory Team 8.5mm Aluminum Clamping Wheel Hexes are an optional upgrade designed to provide a secure, slip-resistant wheel mounting solution. Featuring a clamping design, these hexes help prevent wheel wobble and maintain consistent wheel alignment under high-load racing conditions. Machined from durable aluminum, they offer lightweight strength while improving reliability over standard hex designs. Ideal for racers looking for a more secure and precise wheel fit. Features Factory Team optional upgrade 8.5mm clamping wheel hex design CNC-machined aluminum construction Helps reduce wheel slop and movement Improves wheel mounting security Lightweight and durable Includes (2) 8.5mm Aluminum Clamping Wheel Hexes (2) Axle Pins (2) Hex Screws A race-ready wheel mounting upgrade built for strength, precision, and consistent performance. 🏁  

Read more less

Upgrade your TLR 22X with the Aluminum Narrow Steering Spindles (2°), engineered for racers seeking precise steering response, improved durability, and consistent performance across varying track conditions. The narrow configuration provides refined steering characteristics suited for specific setup needs and tuning preferences. Precision CNC machined from high-strength 7075 aluminum, these spindles deliver exceptional strength and impact resistance while maintaining lightweight performance. The black anodized finish with chamfered edges enhances durability and corrosion resistance while giving your build a clean, factory race appearance. Features 2° narrow steering spindle configuration CNC machined for precise fit and finish Constructed from high-strength 7075 aluminum Black anodized for added durability Chamfered edges for a premium look Improves steering precision and stability Lightweight yet highly durable design Direct upgrade for TLR 22X platforms Includes (2) Aluminum Narrow Steering Spindles (Black, 2°) A race-focused steering upgrade designed to sharpen handling and increase front-end durability on the TLR 22X platform. 🏁    

Read more less

Add front-end stability and cooling performance to your race build with the Team Losi Racing 22X Front Low Wing & Fan Mount Set. Designed specifically for the 22X 2WD buggy platform, this set helps improve aerodynamic balance while providing a secure mounting solution for your motor cooling fan. The front low wing increases front downforce, helping improve steering feel and consistency on high-speed sections and high-grip surfaces. Paired with the included fan mount, this setup supports better motor cooling during long mains and hot race days, keeping performance consistent from start to finish. Whether you're refreshing worn components or dialing in your race setup, this is a must-have replacement for competitive 22X racers. Features: Genuine TLR replacement parts Improves front-end stability and steering feel Provides secure motor fan mounting Designed for competitive 22X setups Direct fit for 22X 2WD buggy platforms Includes: (1) Front Low Wing (1) Fan Mount Built for racers who want balanced aero performance and reliable cooling when it matters most.  

Read more less

Fine-tune your track width and lock in wheel reliability with the Team Losi Racing 22X Aluminum 12mm Wheel Hex set. Precision-machined from ultra-lightweight, rigid aluminum, these hexes deliver strength and durability without adding unnecessary rotating weight. The clamp-style design provides a secure, slip-resistant fit on the axle, helping eliminate wheel wobble and improving consistency under acceleration and heavy cornering loads. Finished with a durable anodized coating, these hexes resist corrosion while giving your 22X that clean, pro-level race look. Laser-etched size markings make quick setup changes easy at the track, and the included axle pins ensure straightforward installation. The 7mm thickness option allows precise tuning of track width and handling characteristics to match surface conditions and driving style. Features: Strong, lightweight aluminum construction Clamp-style design for secure axle fit Anodized finish for durability and corrosion resistance Laser-etched size markings for quick identification Includes axle pins for easy installation 7mm thickness for precise track width tuning Includes: (2) Aluminum 12mm Wheel Hex (7mm) Built for serious racers who demand precision, durability, and consistent performance from their TLR 22X platform.

Read more less

Add style and serious protection to your TLR 22X with the 1UP Racing Reusable Chassis Protector Sheet. Designed with a bold carbon fiber look and twin 1UP outline logos, this chassis skin protects high-wear areas while keeping your car looking sharp on and off the track. Made from thick, durable vinyl with an ultra-tacky adhesive, this protector can be peeled and reused up to 7–8 times without losing grip. A separate tailpiece section allows full access to rear screws, and two extra tailpieces are included to handle heavy wear zones. Features Pre-cut specifically for TLR 22X Thick, durable vinyl construction Carbon fiber style finish with 1UP outline logos Super tacky adhesive for long-lasting hold Reusable up to 7–8 applications Separate tailpiece for rear screw access Includes 2 extra tailpieces for high-wear areas Includes (1) TLR 22X Twin 1UP Outline Logo Reusable Chassis Protector Sheet Fitment TLR 22X A clean, reusable solution that protects your chassis and keeps your build looking race-ready. 🏁  

Read more less

Restore smooth, consistent shock performance with the Team Losi Racing G3 TiNi Shock Shaft, precision-engineered for durability and reduced friction. Featuring a Titanium Nitride (TiNi) coating, this shock shaft delivers exceptional wear resistance and ultra-smooth operation for consistent damping through the entire stroke. Designed for G3 13mm shocks, this shaft is ideal for racers maintaining or rebuilding their suspension to factory specifications, ensuring reliable performance on high-grip and rough track conditions. Features: Precision-ground 3mm shock shaft 42.7mm length for G3 shock applications TiNi coating for reduced friction and long-lasting durability Smooth, consistent suspension action Factory replacement quality Includes: (1) 3mm x 42.7mm TiNi G3 Shock Shaft Compatibility: Team Losi Racing 22X (G3 13mm shocks)

Read more less

Upgrade your front-end strength and steering precision with this Powerhobby aluminum steering knuckle. CNC-machined from high-quality aluminum, this is a direct replacement for the stock plastic part, offering improved durability and consistent steering performance. Features: CNC-machined aluminum construction Increased strength and durability over stock Precision fit for smooth, reliable steering Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA330841 Perfect for racers and bashers looking to reduce flex, improve reliability, and add a custom look.  

Read more less