🔧 Precision Steering Control – Keep your B84’s front end dialed with the Factory Team Front Hubs. Designed for durability and tuning flexibility, these hubs ensure consistent steering response and smooth suspension geometry under race conditions. ⚙️ Features:✅ Precision-molded for a perfect fit on the B84 platform✅ Multiple camber link mounting holes for fine-tuned steering feel✅ Durable construction for long-lasting performance✅ Factory Team quality parts for competitive-level racing 📦 Includes: (1) Left Front Hub (1) Right Front Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use the inner camber link holes for more aggressive steering on tight tracks, and the outer holes for smoother, more stable cornering.

Read more less

⚡ Keep the Power Flowing – Replace or upgrade your drivetrain with the Factory Team 102mm Center CVA Bone for the RC10B84. Precision-machined for smooth rotation and durability, this part ensures consistent power transfer through your buggy’s center driveline. ⚙️ Features:✅ 102mm length – designed specifically for the RC10B84✅ Precision-machined for smooth, efficient drivetrain performance✅ Strong, durable construction for long-lasting use✅ Factory Team quality for competitive racing 📦 Includes: (1) 102mm Center CVA Bone 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Always check for wear at the pins and outdrives—swapping CVA bones before they fail helps protect more expensive drivetrain parts.    

Read more less

⚡ Durability Where It Matters – Take your drivetrain to the next level with the Factory Team LTC Metal Differential Set for the B84. Designed to withstand the demands of top-tier racing, these precision-machined diffs deliver smooth, consistent power transfer and extended life. ⚙️ Features:✅ Complete front & rear metal differentials for maximum durability✅ Longer wear life than composite options✅ Factory Team precision for smoother operation✅ Engineered specifically for the RC10B84 📦 Includes: (1) Front LTC Metal Differential Assembly (1) Rear LTC Metal Differential Assembly 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair with Factory Team diff fluids to fine-tune traction and stability based on track grip levels.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

This is a Team Associated "B" Arm Mount, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied rear "B" Arm Mount. This contains one anodized blue arm mount. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Graphite Rear Hub Link Shim Set: RC10B74   ASC92185

Read more less

Team Associated Factory Team 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated B74.2 platform. Constructed from high quality titanium these offer increased durability over stock components and replace all the stock turnbuckles.Includes: (2) 3.5x45mm Titanium Turnbuckles (4) 3.5x42mm Titanium Turnbuckles (1) 3.5x35mm Titanium Turnbuckle COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Factory Team B6.4/B6.4D 3.5x48mm Titanium Turnbuckles. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two 3.5x48mm turnbuckles. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

JConcepts F2 Lightweight Body for XRAY XB4 2024 – Includes Two 6.5" Wings💨 Championship-Proven Aero, Now in Lightweight Form Take your XRAY XB4 2024 to the next level with the JConcepts F2 Lightweight Body — designed for racers chasing every ounce of performance. Based on the IFMAR World Championship-winning design, the F2 body blends a forward cab bias, louvered roof, and signature Finnisher “V” styling for ultimate responsiveness and downforce. Now molded in a lightweight polycarbonate, this variant reduces overall mass for quicker transitions, faster acceleration, and a more planted feel on high-grip surfaces. Perfectly contoured to the XRAY XB4 2024 chassis, the F2’s tight layout offers plenty of clearance for your battery, servo, and motor configuration, while delivering a clean fit around the front bulkhead and top deck. ✨ Key Features: Lightweight polycarbonate construction for reduced mass Direct fit for XRAY XB4 2024 Forward cab bias with aggressive windshield angle Louvered roof, double-step side-pods, and rear kick-up for stable aero Accommodates modern 4WD electronics layouts Includes (2) 6.5" Carpet | Turf | Dirt Wings Window masks and JConcepts decal sheet included 📦 Includes: (1) Clear Lightweight F2 Body for XRAY XB4 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility:  • XRAY XB4 2024

Read more less

The Team Losi Racing 10x14mm Shim Set is a genuine replacement and setup component for compatible TLR and Losi 22-series vehicles. This set includes both 0.1mm and 0.2mm thicknesses, allowing for precise spacing and adjustment during vehicle setup, maintenance, or rebuilding. About the TLR Shim Set Precision Setup & Adjustment With two different shim thicknesses included, this set provides additional flexibility when making fine spacing adjustments. Each shim measures 10x14mm, with five 0.1mm and five 0.2mm shims included. Features ✔ Genuine Team Losi Racing replacement/setup parts✔ 10x14mm shim dimensions✔ Includes two shim thicknesses✔ 0.1mm and 0.2mm options✔ Allows precise spacing and adjustment✔ Ideal for maintenance, rebuilds, and vehicle setup✔ Ten total shims included Includes (5) 10x14x0.1mm Shims (5) 10x14x0.2mm Shims Specifications Specification Details Brand Team Losi Racing Part Number TLR236006 Product Type Shim Set Shim Size 10x14mm Thicknesses 0.1mm & 0.2mm Quantity 10 Total Compatibility Compatible with: Losi 22 4.0 SPEC-Racer Losi 22X Losi 22X-4 1.0 Losi 22X-4 Elite Losi 22X-T Notes Includes five shims of each thickness, for a total of 10 shims. Verify compatibility with your specific vehicle and application before installation.    

Read more less

The XRAY 2.5mm Graphite Steering Block Extension is a front-end tuning option designed to adjust Ackermann geometry and steering response. This 1-slot version provides a handling characteristic between XRAY's standard 2-slot extension and the more aggressive 0-slot version. About the Graphite Steering Block Extension Fine-Tune Steering & Ackermann XRAY designed these extensions to work on either the left or right steering block. The 1-slot configuration turns the outside wheel more than the 2-slot version, producing additional steering while remaining less aggressive than the 0-slot option. Features: Genuine XRAY optional tuning component 2.5mm graphite steering block extensions 1-slot Ackermann configuration Allows fine adjustment of steering characteristics More aggressive steering than the 2-slot configuration Less aggressive than the 0-slot configuration Can be used on left and right steering blocks Designed for tuning across different surfaces and track conditions Lightweight graphite construction Includes two extensions Includes: (2) XRAY Graphite Steering Block Extensions – 1 Slot Specifications: Manufacturer: XRAYPart Number: 322291Material: GraphiteThickness: 2.5mmConfiguration: 1 SlotPosition: Front SteeringQuantity: 2 Compatibility: ✅ XRAY XB2✅ XRAY XT2 XRAY's current XB2 documentation continues to list 322291 as the optional 1-slot steering block extension, alongside 322290 2-slot, 322292 0-slot, and 322293 3-slot configurations. 💡 Pro Tip: XRAY's Ackermann options let you tune how aggressively the car steers: 322290 – 2 Slot: Easier to drive, less aggressive322291 – 1 Slot: Middle-ground steering response322292 – 0 Slot: Most aggressive steering, suited to tight and technical layouts

Read more less

The XRAY Aluminum Front Suspension Holder Brace is a precision-machined suspension tuning component designed for XB2 setups using the optional 23°/29° front lower arm mounts. Manufactured from premium Swiss 7075-T6 aluminum, the brace supports the front suspension holder while allowing either 23° or 29° kick-up configurations. Features: Genuine XRAY optional tuning component CNC-machined Swiss 7075-T6 aluminum Designed for 23° or 29° front kick-up Supports the optional front lower suspension arm mount Precision-machined for accurate suspension geometry Durable aluminum construction Designed for competition-level XB2 setups Required when using applicable 23°/29° optional arm mounts Includes: (1) XRAY Aluminum Front Suspension Holder Brace Specifications: Manufacturer: XRAYPart Number: 321211Material: Swiss 7075-T6 AluminumKick-Up: 23° / 29°Position: FrontType: Suspension Holder Brace Compatibility: ✅ XRAY XB2✅ XRAY XT2 configurations using this front suspension system XRAY manuals document 321211 alongside the optional 322313 aluminum and 322314 brass 23°/29° front lower arm mounts. 💡 Pro Tip: If you're buying 321211, double-check your front arm mount. This brace is specifically associated with the 23°/29° setup and is used with 322313 or 322314.

Read more less

The XRAY Aluminum Rear Hub Plate is a precision-machined rear suspension component designed for XRAY's multi-adjustable rear upright system. Manufactured from premium Swiss 7075-T6 aluminum, this plate provides a strong and precise mounting interface while allowing racers to take advantage of XRAY's adjustable rear hub geometry. About the Aluminum Rear Hub Plate Precision Rear Suspension Adjustment The 323381 rear hub plate works with XRAY's multi-adjustable rear upright system, allowing the rear hub configuration to be tuned through different mounting positions. XRAY factory manuals show the plate installed in the rear upright assembly and provide alternate mounting orientations for setup changes. Features: Genuine XRAY replacement and tuning component CNC-machined from Swiss 7075-T6 aluminum Designed for XRAY multi-adjustable rear uprights Precision-machined for accurate suspension fitment Multiple mounting positions for rear suspension tuning Lightweight and durable aluminum construction Suitable for left or right rear upright Competition-oriented suspension component Great replacement or race-day tuning spare Includes: (1) XRAY Aluminum Rear Hub Plate Specifications: Manufacturer: XRAYPart Number: 323381Material: Swiss 7075-T6 AluminumPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2✅ XRAY XB4 XRAY factory documentation shows 323381 in both XB2 and XB4 rear upright assemblies. 💡 Pro Tip: This is one rear hub plate, not a pair. The same 323381 plate is used on either the left or right rear upright, so you'll need two if you're replacing both sides. XRAY's assembly diagrams specifically show the rear upright assembly as L=R

Read more less

The XRAY 83mm Front Drive Shaft is a genuine replacement CVD driveshaft designed for the XB4 front drivetrain. Manufactured from XRAY's premium HUDY Spring Steel™, this shaft combines high strength, durability, and precise machining for smooth and efficient power delivery. About the Front Drive Shaft Competition-Ready CVD Performance This 83mm CVD driveshaft uses a 2.5mm drive pin and is designed for the front drivetrain. XRAY factory documentation identifies the 83mm CVD as the included front driveshaft on multiple XB4 generations. Features: Genuine XRAY replacement component Front CVD driveshaft Premium HUDY Spring Steel™ construction 83mm length 2.5mm drive pin Precision-machined for smooth drivetrain operation Designed for competition-level durability Suitable for left or right front position Excellent replacement or race-day spare Includes: (1) XRAY Front Drive Shaft Specifications: Manufacturer: XRAYPart Number: 365225Material: HUDY Spring Steel™Length: 83mmDrive Pin: 2.5mmType: CVDPosition: FrontQuantity: 1 Compatibility: ✅ XRAY XB4 XRAY's factory documentation confirms 365225 across multiple XB4 generations, including the XB4 2021 and XB4 2024 front drivetrain assemblies. 💡 Pro Tip: XRAY also lists other front shaft options around this setup, including 365202 – 83mm ECS and 365226 – 84mm CVD. Make sure you're matching the shaft length and CVD/ECS configuration required by your specific setup.

Read more less

The XRAY 77mm Rear Drive Shaft is a precision CNC-machined CVD driveshaft manufactured from XRAY's renowned HUDY Spring Steel™. Designed for competition-level durability and drivetrain efficiency, this rear driveshaft features a 2.5mm drive pin and a thin, lightweight profile while maintaining excellent strength. XRAY directly confirms these specifications for part 325327. About the Rear Drive Shaft Precision Drivetrain Performance The 77mm driveshaft is designed to provide efficient power transfer through the rear drivetrain. XRAY uses a proprietary hardening process on its HUDY Spring Steel™ driveshafts to increase durability and service life while maintaining a thin shaft profile for reduced rotating mass. Features: Genuine XRAY replacement drivetrain component CNC-machined CVD rear driveshaft Premium HUDY Spring Steel™ construction 77mm length 2.5mm drive pin Thin, lightweight driveshaft design Designed for maximum drivetrain efficiency Proprietary hardened construction for increased durability Precision manufactured for competition RC racing Includes: (1) XRAY Rear Drive Shaft Specifications: Manufacturer: XRAYPart Number: 325327Material: HUDY Spring Steel™Length: 77mmDrive Pin: 2.5mmPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2 XRAY's XB2 manuals continue to list 325327 in the rear drivetrain, including newer XB2 configurations. There is also evidence of this 77mm shaft being used on certain XB4 configurations, but I would not advertise universal XB4 compatibility because fitment varies by generation and setup. 💡 Pro Tip: When replacing the rear driveshaft, inspect the drive shaft coupling, 2.5mm pin, drive axle, and bearings for wear at the same time. Excessive play in any of these components can reduce drivetrain efficiency and accelerate wear on the new shaft.

Read more less

The XRAY XB4 Aluminum 12° C-Hub is a premium suspension tuning option designed for high-traction racing conditions. CNC-machined from Swiss 7075-T6 aluminum, these C-hubs provide increased strength and precise front suspension geometry while offering a different handling characteristic from the composite C-hub options. Available in Right or Left — select the side you need. XRAY confirms 362234 is Right and 362244 is Left. Features: Available in Right or Left Pre-set 12° caster angle CNC-machined Swiss 7075-T6 aluminum Black-coated and laser engraved Recommended for high-traction conditions Increases steering coming out of corners Improves stability entering corners Adjustable roll-center position using shims Large opening allows easier CVD installation and removal Genuine XRAY performance option Available Options: Right – 362234(1) XRAY Aluminum C-Hub Right – 12° Left – 362244(1) XRAY Aluminum C-Hub Left – 12° Specifications: Manufacturer: XRAYPart Numbers: 362234 / 362244Material: Swiss 7075-T6 AluminumCaster: 12°Position: Front – Left or RightQuantity: 1 C-Hub per selected option Compatibility: ✅ XRAY XB4 XRAY's current XB4 documentation continues to list both 362234 Right and 362244 Left as 12° aluminum C-hub options. 💡 Pro Tip: XRAY specifically recommends the 12° aluminum C-hubs for high-traction conditions, noting increased steering on corner exit and greater stability entering the corner. Right = 362234Left = 362244 Confidence: HIGH — verified directly against XRAY.

Read more less

The XRAY Aluminum Lower Suspension Holder is a precision-machined front suspension component designed for XRAY's Horizontal Split (HS) bulkhead system. Part 362313 installs in the Front-Front (FF) position and works with XRAY's eccentric bushing system to provide a wide range of suspension geometry adjustments. About the Aluminum Lower Suspension Holder Precision Suspension Geometry & Setup Tuning The 362313 holder allows racers to fine-tune front kick-up, roll center, and front track width by changing the position of the eccentric suspension bushings. XRAY also designed the holder so its orientation can be changed depending on track conditions, with the downward orientation primarily used for dirt and the upward orientation primarily used for carpet. Features: Genuine XRAY suspension component Front-Front (FF) lower suspension holder Designed for Horizontal Split (HS) bulkheads CNC-machined aluminum construction Works with XRAY eccentric suspension bushings Allows adjustment of front kick-up Allows roll-center adjustment Allows front track-width adjustment Can be oriented for dirt or carpet setups Supports standard and long front suspension arm configurations Black-coated finish Designed for competition-level suspension tuning Includes: (1) XRAY Aluminum Lower Suspension Holder – Front-Front Specifications: Part Number: 362313Material: Swiss 7075-T6 AluminumFinish: Black CoatedPosition: Front-Front (FF)Bulkhead Type: Horizontal Split (HS)Type: Lower Suspension Holder Compatibility: ✅ XRAY XB4✅ XRAY XT4 XRAY factory documentation confirms 362313 in both XB4 and XT4 front suspension assemblies. 💡 Pro Tip: 362313 is the Front-Front (FF) holder. The matching Front-Rear (FR) holder is 362323. These two parts work together around the front HS bulkhead, so make sure you're ordering the correct position.

Read more less

The XRAY Aluminum Lower Suspension Holder is a precision-machined suspension tuning component designed for XRAY's Horizontal Split (HS) bulkhead system. Part 362323 installs in the front-rear (FR) position of the front suspension assembly. XRAY's factory manuals confirm the part number and FR location. About the Aluminum Lower Suspension Holder Precision Front Suspension Tuning Designed around XRAY's eccentric bushing system, this aluminum suspension holder allows racers to fine-tune important front-end geometry. XRAY specifically notes that different eccentric bushing combinations allow adjustment of front kick-up, roll center, and front track width, making this more than just a replacement part—it's also a valuable setup component. Features: Genuine XRAY suspension component Front-Rear (FR) lower suspension holder Designed for Horizontal Split (HS) bulkheads Aluminum construction Works with XRAY eccentric suspension bushings Allows adjustment of front kick-up Allows roll-center tuning Allows front track-width adjustment Precision fit for compatible XRAY 4WD platforms Excellent replacement or race-day setup option Includes: (1) XRAY Aluminum Lower Suspension Holder – Front-Rear Specifications: Part Number: 362323Material: AluminumPosition: Front Suspension – Rear Holder (FR)Bulkhead Type: Horizontal Split (HS)Type: Lower Suspension Holder Compatibility: ✅ XRAY XB4✅ XRAY XT4 The part is documented in the XB4 platform and is also specifically listed in the XT4 2024 front suspension assembly. 💡 Pro Tip: 362323 is the FR holder. If you're looking at the front suspension assembly, don't confuse it with 362313, which XRAY identifies as the matching Front-Front (FF) aluminum lower suspension holder.

Read more less

🏁 Large-Volume Design. Tough Composite. Genuine XRAY Performance. The XRAY Large Volume Composite Gear Differential Case is a genuine replacement differential housing designed for XRAY's large-volume gear differential system. XRAY manufactures the case from tough composite material and uses a rubber-sealed design to help maintain consistent differential operation. Designed for use in the front or rear differential, this is the standard composite version of the case, with 364912-G available separately as the optional graphite-composite version. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ Large-volume gear differential case💪 Tough composite construction🛡️ Rubber-sealed differential design🔧 Suitable for front or rear differential use🎯 Precision factory fitment🏎️ Designed for XRAY's large-volume differential system🛠️ Direct replacement for a worn or damaged differential case 📦 Includes: (1) XRAY Large Volume Composite Gear Differential Case 📏 Specifications: Part Number: 364912Material: CompositeType: Gear Differential CaseDifferential Type: Large VolumePosition: Front or Rear 🔧 Compatibility: Verified XRAY documentation shows 364912 used on multiple generations of the: ✅ XRAY XB4 XRAY's factory documentation confirms its use in the XB4 front and rear differential assemblies, including the XB4 2021, 2022, 2024, and 2025 platforms. 💡 Pro Tip: Don't confuse 364912 with 364912-G. The standard 364912 is the tough composite version, while 364912-G is XRAY's optional graphite-composite version.  

Read more less

🏁 Genuine XRAY Replacement. Precision Steering Hardware. The XRAY +5mm Servo Saver Pivot Shafts are genuine replacement steering components designed to support the servo saver and steering assembly on compatible XRAY 1/10 4WD off-road platforms. XRAY's official parts listing identifies 362552 specifically as “Servo Saver Pivot Shaft +5mm (2).” ⚡ Features: 🏁 Genuine XRAY replacement parts📏 +5mm pivot shaft configuration⚙️ Designed for the servo saver and steering assembly🎯 Maintains proper steering-system positioning and geometry🔧 Direct replacement for the factory pivot shafts🏎️ Designed for competition-level XRAY off-road platforms🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Servo Saver Pivot Shafts +5mm 📏 Specifications: Part Number: 362552Type: Servo Saver Pivot ShaftConfiguration: +5mmQuantity: 2Position: Steering / Servo Saver Assembly 🔧 Compatibility: Verified XRAY documentation shows 362552 used across multiple generations of: ✅ XRAY XB4✅ XRAY XT4 For example, XRAY's XB4 2024, XB4 2025, XB4 2026, and XT4 2025 manuals all identify 362552 in the steering assembly. 💡 Pro Tip: These pivot shafts work directly with the servo saver assembly, so if you're rebuilding a steering system, inspect the servo saver, bearings, steering bushings, and steering plate for play at the same time.

Read more less

 🏁 Graphite Composite. Precision Steering. Genuine XRAY Performance. The XRAY Graphite Composite Steering Block is designed for use with XRAY's carbon steering block extension plate system. The graphite composite construction provides a stiff, lightweight steering component designed for precise front-end response and competition-level durability. XRAY's official parts listing identifies 362251-G specifically as “Composite Steering Block for Carbon Extension Plate – Graphite.” ⚡ Features: 🏁 Genuine XRAY replacement/tuning part💪 Graphite composite construction🎯 Designed for precise steering response🪶 Lightweight composite design🔧 Designed specifically for use with XRAY carbon extension plates⚙️ Compatible with XRAY's front CVD drivetrain configuration🏎️ Competition-oriented steering component🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Graphite Composite Steering Block 📏 Specifications: Part Number: 362251-GMaterial: Graphite CompositeType: Steering BlockPosition: FrontQuantity: 1Application: Carbon Extension Plate Steering System 🔧 Compatibility: ✅ XRAY XB4 platforms using the applicable carbon extension plate steering system The XB4 2026 factory manual specifically lists 362251-G as the included graphite steering block, alongside 362251-M Medium and 362261 Aluminum as setup options. 💡 Pro Tip: Don't confuse 362251-G with 362250-G. XRAY lists them as two different parts: 362251-G is specifically designed for the carbon extension plate, while 362250-G is the standard graphite composite steering block.

Read more less

🏁 High-Grip Stability. Linear Response. Factory-Matched Performance. The XRAY 42mm 5-Dot Front Spring Set is designed specifically for XRAY big-bore shocks, providing a constant linear spring rate throughout compression for predictable and consistent suspension performance. XRAY identifies the 5-dot rating directly on the springs for quick setup identification. Each XRAY spring is individually measured, selected, and matched into pairs to ensure equal length and consistent performance between the left and right sides of your race car. ⚡ Features: 🏁 Genuine XRAY optional tuning springs⚙️ 5-Dot front spring rate📏 42mm length🎯 Linear spring design provides a constant rate throughout compression🔧 Specifically designed for XRAY big-bore shocks⚖️ Individually measured and matched into pairs🚀 Provides additional suspension setup options🔥 XRAY notes the 5-dot spring can improve front stability and overall handling on very high-grip tracks 📦 Includes: (2) XRAY 42mm 5-Dot Front Springs 📏 Specifications: Part Number: 368195Position: FrontLength: 42mmSpring Type: LinearIdentification: 5 DotsQuantity: 2 🔧 Compatibility: Used across multiple XRAY 1/10 off-road platforms, including various: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT2 Fitment spans numerous generations, so racers should confirm the 42mm front spring configuration used on their specific model before ordering. 💡 Pro Tip: The 5-Dot is a setup spring, not simply a replacement spring. XRAY specifically notes that this spring can provide better front stability and overall handling in very high-grip conditions, making it a useful tuning option for carpet and other high-traction surfaces.

Read more less

 🏁 Lightweight. Precise. Genuine XRAY Replacement. The XRAY Composite Servo Saver is a genuine factory replacement component designed for XRAY's steering system. The molded composite pieces form the servo saver assembly, helping protect the steering servo from impacts while maintaining smooth and responsive steering operation. XRAY's official parts listings identify 362510 specifically as the Composite Servo Saver. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ Molded composite construction🛡️ Servo saver design helps protect steering components from impacts🎯 Maintains smooth steering operation🪶 Lightweight factory-style construction🔧 Direct replacement for the original servo saver components🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Composite Servo Saver Set 📏 Specifications: Part Number: 362510Material: CompositeType: Servo SaverPosition: Steering Assembly 🔧 Compatibility: XRAY's documentation confirms 362510 is used on multiple XRAY 1/10 off-road platforms, including the XB4 and XT4 families. It remains listed in the XT4 parts documentation as the standard composite servo saver. 💡 Pro Tip: XRAY also offers 362510-G, the optional graphite composite version. The graphite version uses a specially formulated material intended to increase strength, improve friction characteristics, and reduce weight.

Read more less

🔧🏁 Medium-Compound Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Left Rear Lower Suspension Arm is a genuine replacement suspension component designed for compatible XRAY XB2 and XB4 1/10 competition buggies. Molded from XRAY's Medium composite compound, this arm provides the standard balance of durability, flex, and suspension response for both carpet and dirt racing applications. Precision molded for direct factory fitment, it's an ideal replacement for a worn or damaged suspension arm or a useful spare to keep ready in your pit box. 🏁 About the Medium Suspension Arm ⚙️ Medium Composite Compound XRAY offers these suspension arms in multiple compounds, including Medium, Hard, and Graphite. This Medium version provides the standard compound option for a balanced combination of flex and durability. 🔧 Factory Fitment Designed for compatible XB2 and XB4 platforms, the arm installs directly while maintaining XRAY's intended rear suspension geometry and mounting locations. 🔧 Features Genuine XRAY replacement suspension component Left rear lower suspension arm Medium composite compound Balanced flex and durability Precision molded construction Direct factory fitment Maintains proper suspension geometry Suitable for carpet and dirt racing Compatible with select XB2 and XB4 platforms Great replacement or race-day spare 📦 Includes (1) XRAY Left Rear Lower Suspension Arm – Medium 📊 Product Details Specification Details Brand XRAY Part Number 363122-M Product Type Rear Lower Suspension Arm Position Left Rear Compound Medium Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt

Read more less

🔧🏁 Hard-Compound Long Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Composite Long Rear Lower Left Suspension Arm is a genuine replacement and tuning component designed for compatible XRAY XB2 and XB4 competition buggies. Constructed from XRAY's durable Hard composite material, this long rear arm provides a strong, responsive suspension setup while maintaining the precision required for competitive racing. The arm allows variable rear shock positioning and accommodates XRAY multi-adjustable uprights, giving racers additional flexibility when tuning rear suspension geometry for different track conditions. 🏁 About the Hard Long Rear Arm ⚙️ Hard Composite Construction XRAY offers these suspension arms in Medium, Hard, and Graphite compounds for different track and setup demands. This Hard version provides increased rigidity compared with the standard Medium compound while retaining some additional flex compared with the Graphite option. 🔧 Adjustable Shock Positioning Multiple shock positioning options allow racers to fine-tune rear suspension characteristics, while compatibility with XRAY's multi-adjustable uprights provides additional setup flexibility. 💪 Race-Ready Durability XRAY's high-tech composite material is designed to withstand demanding racing conditions while maintaining accurate suspension geometry and reliable performance. 🔧 Features Genuine XRAY replacement and tuning component Long rear lower left suspension arm Hard composite construction Durable and responsive suspension tuning option Variable rear shock positioning Accommodates multi-adjustable uprights Precision molded for accurate fitment Suitable for Carpet and Dirt racing Compatible with select XB2 and XB4 platforms Ideal for replacement or suspension setup tuning 📦 Includes (1) XRAY Composite Long Rear Lower Left Suspension Arm – Hard 📊 Product Details Specification Details Brand XRAY Part Number 363123-H Product Type Rear Lower Suspension Arm Position Left Rear Configuration Long Compound Hard Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt

Read more less

🔧🏁 Rigid Graphite Long Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Composite Long Rear Lower Right Suspension Arm is a genuine replacement and tuning component designed for compatible XRAY XB2 and XB4 competition buggies. Constructed from XRAY's rigid Graphite composite material, this long rear arm combines durability with a stiff, responsive feel for precise suspension performance. The arm supports variable rear shock positioning and works with XRAY's multi-adjustable uprights, giving racers additional flexibility when dialing in their suspension setup for different track conditions. 🏁 About the Graphite Long Rear Arm ⚙️ Rigid Graphite Compound XRAY offers these suspension arms in Medium, Hard, and Graphite compounds to accommodate different setups and track conditions. The Graphite version provides the most rigid option, delivering a responsive suspension feel for racers looking for increased stiffness. 🔧 Adjustable Suspension Setup The arm is designed to allow variable rear shock positioning and accommodate XRAY multi-adjustable uprights, providing additional tuning possibilities within the rear suspension. 💪 Durable Composite Construction XRAY's high-tech composite construction is engineered to withstand the demands of competitive racing while maintaining precise suspension geometry and consistent performance. 🔧 Features Genuine XRAY replacement and tuning component Long rear lower right suspension arm Rigid Graphite composite construction Stiff, responsive suspension tuning option Variable rear shock positioning Compatible with multi-adjustable uprights Durable high-tech composite material Precision molded for accurate fitment Suitable for Carpet and Dirt applications Designed for compatible XB2 and XB4 platforms 📦 Includes (1) XRAY Composite Long Rear Lower Right Suspension Arm – Graphite 📊 Product Details Specification Details Brand XRAY Part Number 363113-G Product Type Rear Lower Suspension Arm Position Right Rear Configuration Long Compound Graphite Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt    

Read more less

🔧🏁 Graphite Suspension Arm Upgrade for XB4 The XRAY Graphite Rear Lower Suspension Arm is an optional upgrade designed for compatible XRAY XB4 1/10 4WD competition buggies. This right-side rear arm features XRAY's graphite composite construction for a more rigid suspension setup and precise response on the track. Originally designed for the XB4 2016, this arm is also compatible with the 2017 and 2018 XB4 platforms. 🏁 About the Graphite Rear Arm ⚙️ Graphite Composite Construction The graphite material provides increased rigidity compared with softer suspension arm compounds, giving racers an additional tuning option for their XB4 setup. 🔧 Direct-Fit XRAY Upgrade Designed specifically for the XB4 suspension system, the arm provides factory fitment and maintains the intended suspension geometry. 🔧 Features Genuine XRAY optional suspension arm Right rear lower suspension arm Graphite composite construction Rigid suspension tuning option Precision molded for proper fitment Maintains factory suspension geometry Direct-fit upgrade for compatible XB4 models Ideal for racing, replacement, or setup tuning 📦 Includes (1) XRAY Graphite Right Rear Lower Suspension Arm 📊 Product Details Specification Details Brand XRAY Part Number 363111-G Product Type Rear Lower Suspension Arm Position Right Rear Material/Compound Graphite Application XRAY XB4 1/10 4WD Buggy 🚙 Compatibility XRAY XB4 2016 XRAY XB4 2017 XRAY XB4 2018  

Read more less

🔧🏁 Choose Your Suspension Arm Compound The XRAY Right Rear Lower Suspension Arm is a genuine replacement and tuning component for a wide range of XRAY XB2 and XB4 1/10 competition buggy platforms. Available in your choice of Hard or Medium compound, this arm allows racers to replace a worn component or select the material option that best suits their setup. Precision molded for proper fit and suspension geometry, it's an essential replacement part to keep on hand at the track. 🔧 Choose Your Compound Medium – Standard medium-compound suspension arm Hard – More rigid hard-compound suspension arm 🏁 Features Genuine XRAY replacement/tuning suspension arm Right rear lower suspension arm Choose Hard or Medium compound Precision molded construction Direct fit for compatible XRAY platforms Maintains proper factory suspension geometry Compatible with a wide range of XB2 and XB4 generations Great replacement or race-day spare 📦 Includes (1) XRAY Right Rear Lower Suspension Arm in selected compound 🚙 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2019 XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt Available Options: Medium or Hard  

Read more less

🔧🏁 Replacement Big Bore Shock Components for the XB4 2025 The XRAY Composite Big Bore Shock Caps, Spring Retainers & Ball Joints Set is a genuine replacement shock parts package designed for the XRAY XB4 2025 Carpet and Dirt platforms. This convenient set includes shock caps, spring retainers, and ball joints for servicing or rebuilding your XB4's big bore shocks. It's also a handy set to keep in the pit box for race-day repairs. 🔧 About the Big Bore Shock Parts Set ⚙️ Genuine XRAY Replacement Components Designed specifically for XRAY big bore shock assemblies, these composite components provide factory fitment for compatible XB4 2025 models. 🏁 Ideal for Shock Maintenance Whether you're rebuilding your shocks during regular maintenance or replacing worn or damaged components, this set provides the primary external components together in one package. 🔧 Features Genuine XRAY replacement shock parts Designed for XB4 2025 big bore shocks Composite construction Includes shock caps Includes spring retainers Includes ball joints Factory replacement fit Ideal for shock rebuilds and maintenance Great spare parts set for the race-day pit box 📦 Includes (2) Composite Big Bore Shock Caps (2) Spring Retainers (2) Ball Joints 📊 Product Details Specification Details Brand XRAY Part Number 368014 Product Type Big Bore Shock Parts Set Material Composite Quantity 2 Sets Application Shock Maintenance / Replacement 🚙 Compatibility XRAY XB4 2025 Carpet XRAY XB4 2025 Dirt  

Read more less

🔧🏁 Lightweight Titanium Upgrade for XRAY Shock Mounting The XRAY Titanium Shock Standoff Set is a precision-machined upgrade designed for a wide range of XRAY racing platforms. Constructed from high-grade titanium, these standoffs provide an excellent combination of strength, low weight, and durability for secure, reliable shock mounting. Ideal for racers looking to upgrade factory components with lightweight premium hardware, each standoff is CNC machined for precise fitment and dependable performance. 🏁 About the Titanium Shock Standoffs ⚙️ High-Grade Titanium Construction Titanium provides excellent strength while keeping weight to a minimum, making these standoffs well suited for competitive racing applications where both durability and weight matter. 🎯 Precision CNC Machined Each standoff is CNC machined for accurate fitment, helping provide a secure mounting point for the shocks and consistent suspension assembly. 💪 Durable & Corrosion Resistant In addition to being lightweight and strong, titanium offers excellent corrosion resistance for long-lasting performance through regular racing and maintenance. 🔧 Features Genuine XRAY optional upgrade High-grade titanium construction CNC machined for precision Lightweight design Strong and durable shock mounting Corrosion resistant Precision fit for compatible XRAY platforms Premium upgrade for competitive racing Package includes two standoffs 📦 Includes (2) XRAY Titanium Shock Standoffs 📊 Product Details Specification Details Brand XRAY Part Number 368045-T Product Type Shock Standoff Material Titanium Construction CNC Machined Quantity 2 🚙 Compatibility XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt XRAY XB4 2025 Carpet XRAY XB4 2025 Dirt XRAY XT2 2023 Carpet XRAY XT2 2023 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt XRAY XT4    

Read more less

🔋🏁 Ultra-Low CG Power Built for Competitive Racing The R1WURKS 4600mAh 120C 7.6V 2S ULCG Shorty LiPo Battery is a race-focused pack designed to deliver an excellent combination of punch, runtime, low weight, and an ultra-low center of gravity. Using R1WURKS Silicon Graphene cell technology, this shorty pack offers reduced internal resistance, cooler operating temperatures, and strong voltage throughout the run. At just 18.4mm tall and 157g, the ultra-low-profile design helps racers lower chassis weight and center of gravity while maintaining the power needed for both stock and modified racing. 🏁 About the R1WURKS ULCG Shorty ⚡ Silicon Graphene Cell Technology R1WURKS Silicon Graphene cells are designed to provide lower internal resistance and improved efficiency, helping the battery operate cooler while delivering excellent voltage, punch, and runtime. The technology also provides increased cycle life and improved voltage characteristics for demanding race applications. 📉 Ultra-Low Center of Gravity With a height of only 18.4mm, the ULCG design places battery mass lower in the chassis. This can help reduce the vehicle's overall center of gravity and gives racers additional flexibility when tuning chassis weight and balance. 🚀 120C Performance The 4600mAh pack carries a 120C peak rating, providing the strong power delivery and acceleration required for competitive stock and modified classes. 🔌 5mm Bullet Connections The battery uses 5mm bullet connectors for the main power connection along with a 2mm balance plug. 🔧 Features 4600mAh capacity 7.6V 2S LiPo configuration Silicon Graphene cell technology Ultra-low center of gravity design 120C peak discharge rating Excellent punch and sustained voltage Strong runtime for competitive racing Reduced internal resistance Lower operating temperatures Increased cycle life Lightweight 157g design Only 18.4mm tall 5mm bullet connectors 2mm balance connection Suitable for stock and modified racing Supports charge rates up to 3C 1C charging recommended for maximum battery life ROAR Approved 📦 Includes (1) R1WURKS 4600mAh 120C 7.6V 2S ULCG Shorty Silicon Graphene LiPo Battery 📊 Specifications Specification Details Brand R1WURKS SKU 030040 Battery Type Silicon Graphene LiPo Configuration 2S Nominal Voltage 7.6V Capacity 4600mAh Peak Discharge 120C Watt Hours 35Wh Max Charge Rate 3C Recommended Charge Rate 1C Main Connector 5mm Bullet Balance Connector 2mm Length 92.8mm Width 47mm Height 18.4mm Weight 157g ROAR Approved Yes  

Read more less

⚡🏁 High-Output 12V Power for Your RC Pit Setup The R1WURKS 12V Power Supply delivers a powerful, dependable source of DC power for your RC charging station and pit area. With an output of 12 volts, 750 watts, and 75 amps, it's built to provide plenty of power for demanding charging setups. Finished with a carbon-print vinyl wrap, the R1WURKS power supply combines serious output with a clean, race-ready appearance. ⚡ About the R1WURKS Power Supply 🔋 750W / 75A Output With up to 750 watts and 75 amps of 12V DC output, this power supply provides the capacity needed to run compatible RC battery chargers and other 12V pit equipment. 🔌 Multiple Configurations Available R1WURKS offers several power supply configurations to suit different charging setups, including standard and low-profile options with multiple output slots. 🏁 Pit-Ready Finish A carbon-print vinyl wrap gives the power supply a finished appearance that looks right at home on a race bench or charging station. 🔧 Features 12V DC power supply Up to 750W output Up to 75A output Designed for RC charging and pit applications Carbon-print vinyl wrapped exterior Multiple configurations available Compact solution for powering compatible DC chargers 🔌 Available Configurations 2-Slot 2-Slot Low Profile – 67A w/USB 3-Slot w/USB 📊 Specifications Specification Details Brand R1WURKS Item Number 080001 Product Type DC Power Supply Output Voltage 12V Maximum Output 750W Maximum Current 75A Finish Carbon-Print Vinyl Wrap Application RC Chargers / Pit Equipment Note: Output specifications may vary by configuration. The 2-slot low-profile version is rated at 67A, while the supplied general specifications list the standard power supply at 75A.

Read more less

🧹✨ Get Into the Tight Spots & Keep Your RC Clean The BOOF RC Detailing Brush is a simple, effective tool for cleaning dirt, dust, and debris from your RC cars, trucks, boats, and equipment. Available in five different sizes from 21cm to 25cm, you can choose the size that works best for your cleaning needs. Long, soft bristles make it easy to reach into wheels, suspension components, chassis areas, vents, and other narrow spaces where dirt loves to collect. 🧼 About the Detailing Brush 🔍 Five Sizes to Choose From Available in five different sizes, allowing you to select the brush that best fits your application. Smaller brushes are great for tight spaces and detailed components, while larger sizes make quick work of bigger areas. 🪶 Long, Scratch-Safe Bristles The brush features approximately 2-inch-long bristles and contains no exposed metal parts, helping reduce the risk of scratching or marring delicate surfaces while cleaning. 💦 Wet or Dry Cleaning Use the brush dry to sweep away loose dust and debris or wet for more thorough cleaning. It's a handy addition to your RC pit bag, workbench, or cleaning station. 🔧 Features Choose from 5 different sizes Available in lengths from 21cm to 25cm Long bristles reach into narrow and tight spaces No exposed metal parts Helps reduce the risk of scratching delicate surfaces Suitable for wet or dry use Great for wheels, tires, chassis, suspension, vents, and more Useful for RC cars, trucks, boats, motorcycles, bicycles, and automotive detailing Great addition to your pit bag or workbench 📦 Includes (1) BOOF RC Detailing Brush in Selected Size 📊 Specifications Specification Details Brand BOOF RC Product Type Detailing Brush Available Sizes 21cm, 22cm, 23cm, 24cm or 25cm Bristle Length Approx. 2in Use Wet or Dry Quantity 1 Brush – Choose Size Application RC Cleaning & General Detailing  

Read more less

🔧⚙️ Precision Suspension Tuning Starts Here The ProTek RC Aluminum Ball Stud Washer Set is a must-have upgrade for racers looking to fine-tune their suspension geometry. Made from durable black anodized aluminum, these precision-machined washers won't compress or deform like plastic spacers, providing consistent ball stud height for accurate suspension setup. With three different thicknesses included, you'll have the flexibility to make precise roll center, steering, and wheelbase adjustments. 🔧 About the Aluminum Ball Stud Washer Set ⚙️ Precision Suspension Adjustments These washers allow you to accurately adjust ball stud height, making it easier to fine-tune suspension geometry for improved handling and performance. Common uses include: Roll center adjustments Steering geometry tuning Wheelbase adjustments Link height spacing 💪 Durable Aluminum Construction Unlike plastic spacers, these black anodized aluminum washers resist flattening and deformation, helping maintain consistent suspension settings even under heavy loads. 🏁 Multiple Thicknesses Included Three washer thicknesses provide a variety of tuning options, allowing quick setup changes for different track conditions. 🔧 Features ✔ Precision-machined aluminum construction✔ Black anodized finish✔ Won't flatten or deform like plastic spacers✔ Fits both 4-40 and M3 ball studs✔ Ideal for suspension geometry adjustments✔ Three washer thicknesses included✔ Great for racers and performance tuning 📦 Includes (4) 3 x 5.5 x 0.5mm Aluminum Washers (4) 3 x 5.5 x 1.0mm Aluminum Washers (4) 3 x 5.5 x 2.0mm Aluminum Washers Total: 12 Washers 📊 Specifications Specification Details Material Aluminum Finish Black Anodized Inside Diameter 3mm Outside Diameter 5.5mm Thicknesses Included 0.5mm, 1.0mm, 2.0mm Quantity 12 Washers 🚗 Compatibility Compatible with: RC vehicles using 4-40 ball studs RC vehicles using M3 ball studs Ideal for most on-road and off-road vehicles that utilize adjustable ball stud suspension geometry. ⚠️ Notes Precision tuning washers designed for suspension geometry adjustments. Compatible with both 4-40 and M3 ball studs. Black anodized finish provides excellent durability and corrosion resistance. • • Also available in Blue Anodized (ProTek RC PTK-8371).

Read more less

🏁🔥 Precision Steering & Maximum Front-End Grip for Carpet Racing! The Pro-Motion Viper 2.2" 2WD Front LP Carpet Tires are engineered specifically for competitive carpet and turf racing. Featuring a low-profile carcass, tapered mini pin tread pattern, and race-ready pre-mounted convenience, these front tires deliver smooth steering response, exceptional consistency, and predictable handling for modern 1/10 2WD buggy setups. Available pre-mounted on yellow or white wheels with a 12mm hex. 🏁 About the Viper Front LP Tires 🛞 Low-Profile Carpet Racing Design The LP carcass minimizes sidewall flex for: Improved steering precision More stable cornering Consistent front-end feel ⚙️ Advanced Front Tire Tread Pattern Features tapered mini pins, dual outside wedges, and a directional tread layout to provide balanced grip without an overly aggressive steering feel. 🔥 Race-Ready Pre-Mounted Setup Factory pre-mounted tires save prep time and get your buggy ready for the track immediately. 🔧 Key Features ✔ Low-profile carcass for improved stability✔ Reduces sidewall deflection for consistent handling✔ Tapered mini pin tread design✔ Directional tread pattern for tuning flexibility✔ Dual mini outside wedges enhance steering response✔ Factory pre-mounted for convenience✔ Designed for carpet and turf racing✔ C5 Super Soft compound for maximum traction 🎨 Wheel Color Options Yellow Wheels (3070-C5-Y) White Wheels (3070-C5-W) 📦 Includes (2) Pro-Motion Viper 2.2" 2WD Front LP Pre-Mounted Buggy Tires 📊 Specifications Scale: 1/10 Application: 2WD Buggy Position: Front Wheel Hex: 12mm Inner Tire / Outer Wheel Diameter: 2.2in (55.88mm) 💡 Perfect For ✔ Competitive carpet racing✔ Turf racing setups✔ Indoor 2WD buggy racing✔ Racers seeking smooth front steering response ⚠️ Notes Front tires only Pre-mounted tire/wheel assemblies Designed for carpet and turf surfaces

Read more less