Boost chassis rigidity and improve handling response with the Factory Team 2.5mm Carbon Fiber Stiff Chassis Brace Support Set for the RC10B74.2. This upgrade provides enhanced stiffness across the center section of the buggy, helping to reduce unwanted flex and improve overall consistency, especially on high-grip tracks. 📌 Key Features: Precision-machined 2.5mm carbon fiber construction Stiffens chassis flex in key areas Lightweight with high-strength performance Ideal for high-traction surfaces or aggressive driving styles 📦 Includes: (1) Carbon fiber front brace support (1) Carbon fiber rear brace support ✅ Compatibility: Team Associated RC10B74.2 and B74.2D Factory Team tuned fit and finish

Read more less

Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Shaft Outdrive Set. Designed for use with the decoupled slipper system, this precision-engineered outdrive set provides improved drivetrain durability and smooth power delivery, making it essential for high-level competition and maintenance. 📌 Key Features: Factory Team performance-grade components Designed for decoupled slipper configuration Enhances drivetrain strength and efficiency Precision-machined for accurate fit and finish 📦 Includes: (1) Pair of shaft outdrives (left & right) Hardware required for installation ✅ Compatibility: RC10B74.2 Works in conjunction with the Factory Team decoupled slipper system

Read more less

Optimize your drivetrain performance with the Factory Team Decoupled Slipper Hub and Pads for the RC10B74.2. Designed to work with the decoupled slipper system, this upgrade reduces front wheel influence during off-power cornering and braking, providing smoother handling and increased mid-corner stability on high-grip tracks. 📌 Key Features: Factory Team precision upgrade Designed for use with decoupled slipper setups Reduces braking drag and improves off-power steering Helps maintain consistent rear traction High-quality slipper pads included 📦 Includes: (1) Decoupled Slipper Hub (2) Slipper Pads ✅ Compatibility: Team Associated RC10B74.2 May also fit other RC10B74 variants using a decoupled slipper configuration

Read more less

Upgrade your RC10B74.2 with this official Team Associated Servo Mount Set, specifically designed for use with the decoupled slipper configuration. Precision-engineered for perfect fit and performance, this set ensures secure servo mounting and consistent servo alignment during extreme track action. 🔩 Key Features: Designed for RC10B74.2 vehicles Compatible with decoupled slipper setups Factory Team precision fit and finish Includes both left and right servo mounts 📦 Includes: (1) Left Servo Mount (1) Right Servo Mount ✅ Compatibility: Team Associated RC10B74.2 Vehicles using the decoupled slipper layout

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Upgrade your suspension durability with the XRAY Hardened Shock Shaft (45mm). Made from premium steel and precision-ground for smooth movement, these shafts provide maximum strength, wear resistance, and long-lasting performance. Designed for big-bore shocks, they deliver consistent performance even in the harshest racing conditions. Features: Set of 2 hardened 45mm shock shafts Precision-ground for ultra-smooth shock operation Extreme durability for high-stress racing conditions Direct XRAY factory replacement part Compatibility: XB2 1/10 2WD Buggy (Front/Rear depending on setup) XT2 1/10 Stadium Truck Other XRAY big-bore shock-equipped platforms (check manual for placement) Part Number: 368263

Read more less

Upgrade your suspension with the XRAY Front Hardened Shock Shafts. At 42mm length, these precision-ground shafts are engineered from hardened steel for maximum strength and wear resistance. Perfect for maintaining smooth shock action under the toughest racing conditions. Features: Precision-ground hardened steel shafts for durability 42mm length – direct replacement fit Provides smooth suspension travel and consistent damping Designed for use in high-performance racing applications Includes: (2) Front 42mm Hardened Shock Shafts Compatibility: XRAY XB2 (all variants) XRAY XT2 Stadium Truck May fit other XRAY models using big bore 42mm front shocks (check your manual for confirmation)

Read more less

Dial in your suspension with the XRAY Delrin Shock Piston Set. Made from precision-molded Delrin® for smooth, consistent damping, this complete big bore set gives you every piston option you need to fine-tune handling for any track condition. Features: Includes a complete range of pistons for big bore shocks High-quality Delrin® construction for smooth shock action Provides tuning flexibility for different track surfaces & grip levels Designed for precise fit and long-lasting performance Includes: Full piston assortment for XRAY big bore shocks Compatibility: Fits XRAY vehicles equipped with big bore shock systems

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

Upgrade your steering precision with the XRAY Composite Servo Shim Set. Designed to perfectly space and align your servo, these durable composite shims help reduce stress on linkages and ensure smooth, consistent steering response. Features: Set includes 4 composite servo shims Provides proper servo height and alignment Reduces wear on steering components Lightweight yet durable composite material Easy direct installation Compatibility: Fits all XRAY 1/10 and 1/8 platforms where servo spacing adjustments are required  

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

The XRAY SLS Slipper Clutch Pads are designed for racers who demand consistent performance and smooth power delivery. Made from XRAY’s special SLS (Super Light Slipper) material, these pads offer improved wear resistance, stable slip characteristics, and better heat tolerance for long runs. Whether you’re running on carpet, turf, or dirt, they ensure precise traction control and dependable durability. Features: High-performance SLS (Super Light Slipper) material Provides smooth and consistent slip characteristics Increased durability and wear resistance Designed for stable performance under high heat loads Perfect upgrade or replacement pads for your slipper clutch Includes:(2) SLS Slipper Clutch Pads Compatibility: XRAY XB4 (2021 onwards) XRAY XT4 (2022 onwards)

Read more less

The XRAY Solid Axle Set is the ultimate upgrade for racers looking to maximize acceleration and efficiency on high-traction surfaces. Replacing the center differential, this solid axle delivers instant throttle response with zero power loss — perfect for carpet and turf racing where consistency and punch are key. Built from premium XRAY materials and engineered with precision, this set is lightweight, durable, and designed for winning performance. Features: Solid axle design replaces the center differential for maximum efficiency Provides instant throttle response and direct power transfer Ideal for high-traction carpet and turf conditions Lightweight construction reduces rotating mass Precision-machined for durability and smooth operation Includes:(1) Complete Solid Axle Set Compatibility: XRAY XB4 (2021 onwards) XRAY XT4 (2022 onwards)

Read more less

The XRAY XB4 Carpet One-Way Slipper Clutch Set is a precision-engineered upgrade designed specifically for high-traction carpet tracks. By eliminating the standard slipper effect under braking, this one-way system transfers full braking force directly to the front wheels, giving you sharper corner entry, increased steering response, and faster lap times on carpet. Built from premium materials with XRAY’s renowned attention to detail, this set ensures smooth power transfer and consistent performance race after race. Features: One-way slipper clutch design for sharper braking and corner entry Ideal for high-traction carpet track racing CNC-machined components for precision and durability Direct fit with the XB4 platform Lightweight design reduces rotating mass Includes:(1) Carpet One-Way Slipper Clutch Set Compatibility: XRAY XB4 2021 Compatible with later XB4 models that support the 2021 slipper design

Read more less

The XRAY Rear Wing Posts are precision-molded composite replacements designed to securely mount the rear wing on your XB4 buggy. Made from a high-strength composite material, these posts deliver durability while keeping weight to a minimum. Perfect as a direct replacement or spare set to keep in your pit box. Features: Lightweight, high-strength composite construction Securely mounts the rear wing for consistent performance Precision-molded for perfect fit and alignment Direct factory replacement part Includes:(2) Rear Wing Posts Compatibility: XRAY XB4 (all versions, including 2025) May fit additional XRAY models using the same rear wing mount system

Read more less

The XRAY Aluminum Lower Suspension Holder Wide for HS Bulkhead (Rear-Rear) is a precision-engineered upgrade that boosts stability and durability for your XB4 or XT4. Made from Swiss 7075-T6 aluminum and finished in a sleek black coating, this holder is built to withstand the demands of competitive racing. Designed to fit the Horizontal Split (HS) bulkhead system, it allows racers to choose between long or standard suspension arm configurations, making it adaptable to any track condition. Perfect for those who want a more stable and predictable rear end performance. Features: Machined from Swiss 7075-T6 aluminum for maximum strength Wide geometry improves stability and handling balance Compatible with both long and standard suspension arms Black coated for a factory look and added wear resistance Designed specifically for HS bulkhead systems Includes:(1) Aluminum Lower Suspension Holder Wide – Rear-Rear Compatibility: XRAY XB4 (2021 onwards) XRAY XT4 (2022 onwards)

Read more less

The XRAY Aluminum Lower Suspension Holder Wide for HS Bulkhead (Rear-Front) is a premium upgrade designed to enhance stability and improve suspension geometry on your XB4 or XT4 platform. Machined from Swiss 7075-T6 aluminum and finished with a black coating, this holder delivers maximum strength, precision, and long-lasting durability. Its wide design allows the use of both long or standard suspension arm configurations, making it highly adaptable to different track conditions. A must-have for racers looking to fine-tune handling response and consistency. Features: CNC-machined Swiss 7075-T6 aluminum for extreme strength Wide geometry for increased stability and smoother handling Works with both long and standard suspension arms Black coated for a factory look and wear resistance Designed for HS (Horizontal Split) bulkhead systems Includes:(1) Aluminum Lower Suspension Holder Wide – Rear-Front Compatibility: XRAY XB4 (2021 onwards) XRAY XT4 (2022 onwards)

Read more less

The XRAY XB4 2025 Composite Rear Lower Left Suspension Arm (Hard) is built from a stiff composite blend to maximize durability and precision. With its 3-hole shock mounting layout, this left-side arm offers multiple tuning positions while the hard material minimizes flex. Perfect for smooth, high-grip surfaces where consistency and sharp handling response are critical. Features: Factory XRAY part for the XB4 2025 Hard composite material for reduced flex and added strength 3-hole shock mount design for advanced suspension tuning Left-side rear suspension arm replacement Engineered for precision handling in demanding race conditions Includes:(1) Composite Rear Lower Left Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit select earlier XB4 models (verify with manual/parts list)

Read more less

The XRAY XB4 2025 Composite Rear Lower Right Suspension Arm (Hard) is molded from a stiffer composite blend to deliver maximum precision and durability. Featuring a 3-hole shock mounting design, this arm gives racers tuning flexibility while reducing unwanted flex in high-bite conditions. The harder material increases cornering consistency and improves handling response on smooth, high-grip tracks. Features: Genuine XRAY factory part for the XB4 2025 Molded from hard composite material for reduced flex 3-hole shock mounting for fine-tuned suspension geometry Right-side rear arm replacement Optimized for high-grip or smooth racing surfaces Includes:(1) Composite Rear Lower Right Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit earlier XB4 models (check manual/parts list)  

Read more less

Upgrade your XRAY XB4 with the 2025 Carbon Fiber Rear Shock Tower designed for the HS (High Strength) bulkhead. Featuring a 3-dot configuration, this tower is precision CNC-machined from premium carbon fiber to deliver the perfect balance of strength and low weight. Optimized geometry improves suspension performance, durability, and consistency, giving you an edge on today’s demanding tracks. Features: Genuine XRAY factory part for the XB4 2025 CNC-machined from premium carbon fiber 3-dot shock position design for precise tuning Lightweight yet highly durable construction Direct replacement for the stock shock tower Designed for use with HS bulkhead Includes:(1) Carbon Fiber Rear Shock Tower (HS Bulkhead) – 3 Dots Compatibility: XRAY XB4 2025 (with HS Bulkhead) May fit earlier XB4 models when converted with HS bulkhead system    

Read more less

The XRAY 5.4mm Hard Steel Pivot Balls are built for precision and reliability in the most demanding racing conditions. Featuring a 10mm thread length, these pivot balls are perfect for suspension locations requiring extra reach and strength. Manufactured from premium hard steel, they provide smooth movement, maintain geometry, and deliver long-lasting durability run after run. Features: CNC-machined from high-grade hard steel 5.4mm ball with 10mm thread length Enhanced wear resistance for extended life Ensures precise suspension performance and articulation Official XRAY factory replacement part Includes:(2) 5.4mm Hard Steel Pivot Balls (10mm thread) Compatibility: XRAY XB4 (all versions using 10mm pivot balls) XRAY XT4 (all versions using 10mm pivot balls) Other XRAY vehicles requiring 5.4mm/10mm pivot balls  

Read more less

The XRAY 5.4mm Hard Steel Pivot Balls are precision-crafted for strength, consistency, and long service life. With an 8mm thread length, these pivot balls are ideal for high-stress suspension points where durability and precision are critical. Made from premium hard steel, they ensure smooth operation and maximum reliability on even the toughest tracks. Features: CNC-machined from premium hard steel 5.4mm ball with 8mm thread length Exceptional wear resistance and long-lasting durability Maintains precise suspension geometry and smooth articulation Genuine XRAY factory replacement part Includes:(2) 5.4mm Hard Steel Pivot Balls (8mm thread) Compatibility: XRAY XB4 (all versions using 8mm pivot balls) XRAY XT4 (all versions using 8mm pivot balls) Compatible with other XRAY models requiring 5.4mm/8mm pivot balls    

Read more less

The XRAY 5.4mm Hard Steel Pivot Balls are precision-machined for maximum durability and smooth suspension movement. Made from premium hard steel, these pivot balls are designed to resist wear and deformation under the most demanding racing conditions. Perfect for maintaining tight tolerances and consistent handling, they are a direct replacement XRAY factory part. Features: CNC-machined from high-quality hard steel 5.4mm diameter ball with 6mm thread Superior strength and long-lasting durability Ensures smooth, precise suspension articulation Factory-spec XRAY replacement part Includes:(2) 5.4mm Hard Steel Pivot Balls (6mm thread) Compatibility: XRAY XB4 (all versions requiring 5.4mm pivot balls) XRAY XT4 (all versions requiring 5.4mm pivot balls) May fit additional XRAY vehicles using 6mm-thread pivot balls    

Read more less

The XRAY 55mm Steel Turnbuckles are built for strength, precision, and long-lasting performance. Machined from high-quality steel, these turnbuckles are heat-treated for maximum durability, making them ideal for high-stress applications where consistency matters most. The precision threading ensures smooth adjustments, while the 55mm length is optimized for proper suspension geometry on XRAY vehicles. Features: Precision-machined from high-strength steel Heat-treated for superior durability and wear resistance 55mm length designed for optimal suspension geometry Easy adjustment with center hex design Direct replacement XRAY factory part Includes:(2) 55mm Steel Turnbuckles Compatibility: XRAY XB4 (all versions using 55mm turnbuckles) XRAY XT4 (all versions using 55mm turnbuckles) May fit other XRAY models requiring 55mm length  

Read more less

Upgrade your steering system with the XRAY XB4 6mm Aluminum 2-Hole Steering Plate. Precision-machined from premium Swiss 7075-T6 aluminum, this plate adds durability and rigidity for more consistent steering performance. The 2-hole design provides tuning flexibility, making it easy to adapt to different track conditions. Finished in XRAY’s signature stylish anodizing, this is a must-have upgrade for serious racers. Features: CNC-machined from Swiss 7075-T6 aluminum 6mm thick for extreme strength and precision Two-hole design for steering geometry tuning Hard-anodized finish for wear resistance and premium look Direct fit for XRAY vehicles Includes:(1) 6mm Aluminum 2-Hole Steering Plate Compatibility: XRAY XB4 (2021 & newer) XRAY XT4 (2021 & newer) Fits models using 6mm 2-hole steering system  

Read more less

The XRAY Graphite Composite Steering Block is a high-strength upgrade designed to improve steering precision and durability on your XB4 buggy. Constructed from graphite-reinforced composite, it reduces flex while keeping weight low — giving you sharper, more predictable control in every corner. About the Steering BlockWith an optimized geometry for smoother Ackermann response and consistent steering feel, this steering block is ideal for today’s high-grip racing conditions. Its tough composite material ensures reliability through hard impacts and long race days. Features: Graphite-reinforced composite construction for maximum rigidity Optimized geometry for precise steering response Lightweight and durable race-proven design Direct replacement for the stock steering block Includes:(1) Graphite Composite Steering Block Compatibility: XRAY XB4 1/10 4WD Buggy (2022+ models, check manual for fit)

Read more less

The XRAY 6° Graphite Composite C-Hub is a precision-engineered upgrade that boosts steering response and durability on your XB4 buggy. Made from a graphite-reinforced composite, this hub reduces flex, delivers consistent handling, and holds up to the rigors of competitive racing. About the C-HubDesigned with a built-in 6° caster angle, this hub improves corner entry steering while maintaining stability on exit. Perfect for high-grip tracks, it provides sharper control and a more connected driving feel. Features: Graphite composite construction for stiffness and long life 6° caster angle for responsive and predictable steering Lightweight and race-proven design Direct replacement upgrade for stock hubs Includes:(1) Graphite 6° Composite C-Hub (choose right or left side) Compatibility: XRAY XB4 1/10 4WD Buggy (2022+ models, check manual for fit)

Read more less

The XRAY 9° Graphite Composite C-Hub is a high-performance upgrade that improves steering precision and durability on your XB4 buggy. Molded from a tough graphite-infused composite, this hub reduces flex and delivers consistent handling — ideal for high-traction tracks like carpet and turf. About the C-HubWith a built-in 9° caster angle, this hub sharpens steering response while keeping the buggy stable in high-speed corners. The lightweight, reinforced design ensures dependable performance through intense racing conditions. Features: Graphite composite construction for maximum stiffness and durability 9° caster angle for improved steering precision Lightweight design with factory fit and finish Direct replacement part for stock hubs Includes:(1) Graphite 9° Composite C-Hub (choose right or left side) Compatibility: XRAY XB4 1/10 4WD Buggy (all versions – confirm fit in manual)

Read more less