Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

The 1RC Racing 1/18 Servo Extension Wire is a direct replacement part designed for the 1RC Racing 1/18 chassis lineup. Perfect for extending servo reach or cleanly routing wires through your setup, this high-quality extension ensures a secure, low-resistance connection between components. ⚙️ Features: Genuine 1RC Racing replacement part 100mm length for flexible installation Durable, high-quality wire construction for reliable signal transfer Ideal for clean wire management on your 1/18 scale setup 📦 Includes: (1) 1RC Racing 1/18 Servo Extension Wire (100mm)  

Read more less

JConcepts Team Associated RC10B84 “F2” 1/10 4WD Buggy Body w/ Turf Wing (Clear) SKU: JC0715 (Standard) / JC0715L (Lightweight) The legendary JConcepts “F2” Body has arrived for the Team Associated RC10B84, bringing championship-winning aerodynamics to the latest generation of 4WD buggies. Developed and refined through countless podium finishes—including IFMAR World Championships—the F2 shell delivers cutting-edge handling, airflow, and balance for today’s most demanding racing surfaces. Designed for a tight chassis-hugging fit, the body slides smoothly over the B84’s layout while maintaining precise clearance over the front tower and spur-gear guard. Whether on carpet, turf, or dirt, the F2 gives you the aggressive steering and stability that racers trust to perform at the highest level. ⚙️ Features: Proven F2 World Championship design for Team Associated RC10B84 Forward-biased cab and steep windshield enhance steering response Double-step roof and side-pod design improve stability and airflow Louvered roof and Finnisher-style “V” center line reduce turbulence Rear spur-gear guard coverage with extra impact clearance Includes two 6.5" wings optimized for carpet, turf, or dirt Available in Standard and Lightweight clear polycarbonate versions Includes protective overspray film, window masks, and decal sheet 📏 Specifications: Part Number: 0715 (Standard) / 0715L (Lightweight) Vehicle Compatibility: Team Associated RC10B84 4WD Buggy Material: Clear Polycarbonate (Unpainted) Body Options: Standard or Lightweight Thickness Wing Type: 6.5" Carpet/Turf/Dirt 📦 Includes: (1) RC10B84 “F2” Clear Body (2) JConcepts Wings (1) Window Mask Sheet (1) Decal Sheet 💡 Pro Tip:Pair the F2 Body with a JConcepts Aero Front Wing (0534) to complete your aerodynamic setup—enhancing both steering precision and rear-end stability for a race-ready package proven on world-class tracks.  

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Upgrade your drivetrain durability with the Team Associated RC10B74.1 Aluminum Center CVA Cups. This pair of precision-machined aluminum cups is designed to replace the stock units and withstand the demands of high-torque applications. Perfect for racers looking to reduce rotational mass while improving strength and longevity over stock plastic parts. 🔩 Key Features: Lightweight and durable aluminum construction Precision-machined for optimal fit and performance Direct replacement for stock CVA center cups Helps reduce rotational mass Improved strength for high-torque conditions 📦 Includes: (2) Aluminum Center CVA Cups ✅ Compatibility: Team Associated RC10B74.1 May fit other B74-series vehicles (check manual for fitment) Maintain peak drivetrain performance under pressure with this Factory Team upgrade.

Read more less

Upgrade your steering setup with the Team Associated Factory Team +1 Steering Block Arms, designed to improve cornering response and handling consistency. These +1mm arms provide a subtle but impactful change to the steering geometry, offering increased tunability for your RC10B74 series buggy—especially on smooth or high-traction tracks. 📌 Key Features: +1mm length for refined steering characteristics Factory Team precision upgrade Durable, CNC-machined composite construction Ideal for racers tuning for surface-specific handling 📦 Includes: (1) Left Steering Block Arm (+1) (1) Right Steering Block Arm (+1) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

The XRAY XB4 2025 Composite Rear Lower Left Suspension Arm (Hard) is built from a stiff composite blend to maximize durability and precision. With its 3-hole shock mounting layout, this left-side arm offers multiple tuning positions while the hard material minimizes flex. Perfect for smooth, high-grip surfaces where consistency and sharp handling response are critical. Features: Factory XRAY part for the XB4 2025 Hard composite material for reduced flex and added strength 3-hole shock mount design for advanced suspension tuning Left-side rear suspension arm replacement Engineered for precision handling in demanding race conditions Includes:(1) Composite Rear Lower Left Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit select earlier XB4 models (verify with manual/parts list)

Read more less

The XRAY XB4 2025 Composite Rear Lower Right Suspension Arm (Hard) is molded from a stiffer composite blend to deliver maximum precision and durability. Featuring a 3-hole shock mounting design, this arm gives racers tuning flexibility while reducing unwanted flex in high-bite conditions. The harder material increases cornering consistency and improves handling response on smooth, high-grip tracks. Features: Genuine XRAY factory part for the XB4 2025 Molded from hard composite material for reduced flex 3-hole shock mounting for fine-tuned suspension geometry Right-side rear arm replacement Optimized for high-grip or smooth racing surfaces Includes:(1) Composite Rear Lower Right Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit earlier XB4 models (check manual/parts list)  

Read more less

The XRAY 9° Graphite Composite C-Hub is a high-performance upgrade that improves steering precision and durability on your XB4 buggy. Molded from a tough graphite-infused composite, this hub reduces flex and delivers consistent handling — ideal for high-traction tracks like carpet and turf. About the C-HubWith a built-in 9° caster angle, this hub sharpens steering response while keeping the buggy stable in high-speed corners. The lightweight, reinforced design ensures dependable performance through intense racing conditions. Features: Graphite composite construction for maximum stiffness and durability 9° caster angle for improved steering precision Lightweight design with factory fit and finish Direct replacement part for stock hubs Includes:(1) Graphite 9° Composite C-Hub (choose right or left side) Compatibility: XRAY XB4 1/10 4WD Buggy (all versions – confirm fit in manual)

Read more less

⚙️ Precision Front Drivetrain HousingThe Team Associated RC10B84 Front Gearbox is a direct replacement part engineered to keep your buggy’s front drivetrain running smoothly. Made from durable composite material, this gearbox housing ensures proper alignment of your front diff and gears, maintaining consistent performance under the rigors of racing. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded composite construction ✅ Keeps gears and differential securely in place ✅ Restores drivetrain efficiency after wear or damage 📦 Includes: (1) Front Gearbox Housing    

Read more less

📌 Restore Factory Suspension PerformanceThe Team Associated RC10B84 Front Shock Tower is a direct replacement part designed specifically for the B84 platform. Built to factory specs, this tower keeps your suspension geometry true, ensuring consistent handling and durability on the track. ⚙️ Features: Precision-molded for a direct RC10B84 fit Maintains correct suspension geometry Strong and lightweight construction Ideal replacement for worn or damaged shock towers 📦 Includes: (1) RC10B84 Front Shock Tower 💡 Pro Tip: Keep both front and rear shock towers in your pit box—having spares on hand is the fastest way to recover from a hard crash and get back in the race.  

Read more less

Team Associated RC10B84 Body – Clear (92554) 🏁 Race-Optimized Replacement – Designed specifically for the RC10B84 platform, this low-profile clear body delivers improved aerodynamics and the clean, aggressive Factory Team look. Perfect for racers who want both performance and a fresh canvas for custom paint schemes. ⚙️ Features:✅ Low-profile design for enhanced aerodynamics✅ Molded from durable, lightweight polycarbonate✅ Clear shell – ready for your custom paint job✅ Factory Team fit and finish for competitive racing 📦 Includes: (1) Clear RC10B84 Body (unpainted) 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair this body with lightweight wing options to further dial in downforce and stability for your track conditions.    

Read more less

Restore smooth, consistent differential performance with the Team Associated RC10B74.1 HTC Gear Differential Rebuild Kit V2. This kit includes all the high-quality components needed to service and refresh your HTC gear differential, ensuring optimal power delivery and handling. Features: Complete set of parts to rebuild one HTC gear differential Maintains smooth operation and consistent performance Genuine Team Associated quality for long-lasting reliability V2 version for updated fit and improved durability Compatibility: Team Associated RC10B74.1 May be compatible with other models using the HTC gear differential (check manual for fitment) Includes: All necessary seals, gaskets, and internal components to rebuild one HTC gear diff Perfect for keeping your buggy’s drivetrain running like new.  

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

Keep your drivetrain running smooth with this 6-pack of 5x8x0.3mm pinion gear shims from Team Associated. These are direct replacements for the original kit-supplied parts, ensuring proper spacing and longevity in your RC10B74’s differential setup. 🔧 Features: (6) 5x8x0.3mm precision shims Helps maintain proper gear mesh and reduce drivetrain wear Perfect for fine-tuning your differential clearances High-quality Team Associated genuine parts ✅ Compatibility: Team Associated RC10B74 May also be used on other models requiring these specs Ideal for racers who want to stay dialed in with reliable, efficient performance—because every fraction of a millimeter counts!  

Read more less

Team Associated RC10 4WD Ball Cups (20pcs) [6535] 🔧 Classic performance, restored! Refresh your vintage ride with this set of Team Associated RC10 4WD Ball Cups. Designed specifically for the RC10 Classic, RC10T, and RC10 Worlds editions, these molded plastic rod ends are built for strength, precision, and smooth suspension action. ✅ Direct replacement for factory originals✅ Secure fit on tie rods and turnbuckles✅ Restores tight, responsive steering and suspension✅ Made for RC10 Classic, RC10T, and RC10 Worlds Includes:(20) Ball Cups (Rod Ends) 📦 Part Number: 6535🏁 Brand: Team Associated

Read more less

Team Associated B64 Plastic Gear Differential Gear Set – ASC92076🔧 Smooth Power Transfer, Race-Ready Performance Keep your B64 running smooth with this genuine Team Associated Plastic Gear Differential Set. Whether you're rebuilding or replacing worn-out gears, this set includes everything needed for one full diff—ensuring reliable, consistent drivetrain performance on the track. ✅ Factory replacement for the RC10B64 series✅ Durable plastic gears for lightweight performance✅ Includes all internals needed for one differential rebuild 📦 Includes:• Complete internal gear set for one differential 🔢 Part Number: ASC92076🏁 Brand: Team Associated  

Read more less

This is a Team Associated Front Axle Crush Tube set, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy as replacement for the kit supplied front axel crush tubes. Includes: (2) Front Axle Crush Tubes 

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated RC10B74.1 Anti-Roll Bar Set (1.0–1.3mm) – ASC92289🎯 Finesse Your Setup, One Millimeter at a Time Dial in that buttery-smooth balance with the 1.0–1.3mm Anti-Roll Bar Set for your RC10B74.1 or B74.1D buggy. Perfect for low-traction surfaces or fine-tuning your front or rear roll characteristics, this set gives you everything you need to stay competitive and in control. 💡 Adjustment Effects:🔄 Softer = Increased chassis roll, more grip🚀 Stiffer = Flatter cornering, sharper response 💪 Key Features:✅ Includes 1.0mm, 1.1mm, 1.2mm, and 1.3mm sway bars✅ Compatible with both RC10B74.1 and B74.1D✅ Precision-engineered for race-day consistency 🔧 Includes:• (1) 1.0mm Sway Bar• (1) 1.1mm Sway Bar• (1) 1.2mm Sway Bar• (1) 1.3mm Sway Bar 📦 Part Number: ASC92289🏁 Brand: Team Associated

Read more less

Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Side Rails are an optional upgrade for the Team Associated RC10B74 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Factory Team RC10B6.4/B6.4D 3.5mm Titanium Turnbuckle Set. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74 HD Differential Outdrives. These are replacement outdrives intended for the RC10B74 and RC10B74D buggies. Package includes two outdrives. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated FT Carbon Fiber Front Suspension Arms – ASC92297 Precision Performance for RC10B74.1 & B74.1D Upgrade your B74.1's front end with these Factory Team Carbon Fiber Front Suspension Arms, engineered for lightweight strength and high-traction performance. These arms deliver sharper, more stable handling, especially in fast corners and on high-grip tracks. ⚙️ Features: ✅ Carbon Fiber Construction – Extreme rigidity for responsive steering and stability ✅ 12% Lighter than “hard” material arms ✅ Boosted Durability – Significantly stronger than standard “hard” arms ✅ Factory Team quality for competition-level performance 📦 Includes: (1) Left Front Carbon Suspension Arm (1) Right Front Carbon Suspension Arm ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D 🔧 Perfect for racers seeking precision handling and reduced unsprung weight.

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated RC10B74.2 Differential Pinion Gear Shims (5x6.5x1mm) – ASC92319 Precision Spacing for Consistent Gear Mesh. These Factory Team 5x6.5x1mm differential pinion gear shims are designed specifically for the RC10B74.2 and B74.2D. Ideal for maintaining correct gear mesh and minimizing drivetrain wear, these shims ensure smooth differential operation and long-term performance. 🔧 Features: ✅ OEM-quality replacement shims ✅ Sized 5x6.5x1mm for perfect pinion gear fit ✅ Helps fine-tune gear mesh and reduce wear ✅ Compatible with RC10B74.2 & B74.2D 📦 Includes: (Set of) Differential Pinion Gear Shims (5x6.5x1mm) 🛠️ Keep your drivetrain dialed in with these must-have tuning components!

Read more less

Team Associated Aluminum LRC "D" Arm Mount – RC10B74.1 Optimize rear suspension geometry with precision. The ASC92261 Aluminum LRC "D" Arm Mount is a factory replacement part designed for the RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built from durable aluminum, this mount delivers enhanced strength and consistent performance under race conditions. ⚙️ Features: 🧱 CNC-machined aluminum for increased durability 📐 LRC (Low Roll Center) geometry helps fine-tune rear suspension behavior 🔧 Direct fit replacement for kit-supplied “D” arm mount 📦 Includes: (1) Aluminum LRC "D" Arm Mount ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Maintain your edge on the track with genuine Team Associated tuning components.

Read more less

The Hobbywing XR10 Pro G3X Stock Spec ESC and V10 G5 13.5T Torque Motor Combo delivers a complete competition power system engineered for 1/10 scale stock class racing. Pairing the highly tunable XR10 Pro G3X Stock Spec ESC with Hobbywing's V10 G5 sensored brushless motor, this combo provides precise throttle control, strong power delivery, efficient cooling, and extensive setup adjustability. This version includes the 13.5T TORQUE motor, making it an excellent choice for racers looking for responsive power delivery and competitive stock-class performance. About the XR10 Pro G3X & V10 G5 Combo Precision Stock Spec ESC The XR10 Pro G3X Stock Spec ESC provides refined throttle and braking control specifically for competitive stock racing. Multiple customizable profiles allow racers to tailor performance for different tracks and classes. Adjustable PWM and brake frequencies provide additional control over throttle feel and braking response, while Hobbywing's Softening function helps fine-tune power delivery and drivability. V10 G5 13.5T Torque Motor The included V10 G5 13.5T sensored brushless motor is designed for competition-level stock racing with an emphasis on power, efficiency, and thermal management. This TORQUE version provides racers with a motor option focused on strong power delivery while retaining the tuning capabilities of the V10 G5 platform. Advanced Motor Cooling An exposed winding design and patented rotor cooling system help dissipate heat during demanding race conditions, supporting more consistent performance throughout a run. The motor's lightweight construction and optimized center of gravity also help reduce unnecessary weight while improving vehicle balance. Extensive Tuning Capability Adjustable Hall timing and sensing distance allow racers to fine-tune motor response for different track layouts and driving styles. The ESC adds even more adjustability with programmable profiles, PWM and brake frequency settings, built-in data logging, and external programming and accessory connections. Features ✔ Complete competition ESC and motor combo✔ Designed for 1/10 scale stock racing✔ XR10 Pro G3X Stock Spec ESC✔ V10 G5 13.5T TORQUE brushless motor✔ Sensored brushless operation✔ 160A continuous ESC current✔ 1200A burst ESC current✔ 2S LiPo ESC operation✔ Adjustable 5-7.4V BEC✔ Multiple customizable ESC profiles✔ Adjustable PWM frequency✔ Adjustable brake frequency✔ Hobbywing Softening function✔ Built-in data logging✔ Comprehensive ESC protection systems✔ Adjustable motor Hall timing✔ Adjustable sensing distance✔ Exposed winding motor design✔ Patented rotor cooling system✔ Lightweight motor construction✔ Optimized motor center of gravity✔ Modular motor design for easier maintenance✔ ESC cooling fan included✔ Programmable ESC Includes (1) Hobbywing XR10 Pro G3X Stock Spec Sensored Brushless ESC (1) Hobbywing V10 G5 13.5T Torque Sensored Brushless Motor (1) Sensor Cable (1) Set of Wiring Leads (1) ESC Cooling Fan (1) Instruction Manual Needed to Complete (1) Compatible 2S LiPo Battery Battery and motor connectors as required Compatible vehicle and radio electronics Soldering and installation equipment as required Specifications Specification Details ESC Model XR10 Pro G3X Stock Spec Application 1/10 Motor Type Sensored Brushless Input Voltage 2S LiPo (7.4V) Continuous Current 160A Burst Current 1200A BEC Voltage 5-7.4V BEC Continuous Current 5A Dimensions 35.0 x 33.6 x 30.3mm (1.38 x 1.32 x 1.19") Weight 101.5g (3.58oz) Motor Connector Bare Wire Battery Connector Bare Wire Programmable Yes Motor Model V10 G5 Version Torque Turns 13.5T Application 1/10 Motor Type Sensored Brushless Motor Voltage 1S-3S Adjustable Timing Yes Connector Solder Tabs Dimensions 35.8 x 51.9mm (1.41 x 2.04") Shaft Diameter 3.175mm (1/8") Weight 138g (4.87oz) Notes This combo includes the 13.5T TORQUE version of the Hobbywing V10 G5 motor. The XR10 Pro G3X Stock Spec ESC is designed for 2S LiPo operation. The motor itself is rated for 1S-3S operation; when used with the included ESC, follow the ESC's 2S input requirements. Battery and motor connections are supplied as bare wire/solder tabs and may require soldering during installation. Verify your racing organization's motor, ESC, and boost/timing rules before use in a specific stock racing class.  

Read more less

🔋🏁 High-Capacity Shorty Power with a Low Center of Gravity The R1WURKS 5000mAh 120C 7.6V 2S LCG Shorty LiPo Battery is designed for competitive racers looking for a strong combination of runtime, punch, voltage, and low-center-of-gravity performance. Built with R1WURKS Silicon Graphene cell technology, this pack delivers reduced internal resistance, cooler operating temperatures, and efficient power delivery throughout the run. With 5000mAh of capacity and a 120C peak rating, the 030041 provides plenty of power for both stock and modified racing while maintaining a compact shorty footprint. 🏁 About the R1WURKS LCG Shorty ⚡ Silicon Graphene Technology R1WURKS Silicon Graphene cells are designed for improved efficiency and lower internal resistance, helping reduce operating temperatures while providing strong voltage and punch. The technology also offers improved runtime, increased cycle life, and excellent performance for demanding race applications. 📉 Low Center of Gravity At only 19.4mm tall, the LCG shorty design keeps battery weight low in the chassis to help improve overall vehicle balance and handling. 🚀 5000mAh / 120C Performance A 5000mAh capacity provides excellent runtime, while the 120C peak rating delivers the punch and power needed for competitive stock and modified racing. 🔌 Race-Ready Connections The pack features 5mm bullet connectors for the main power connection and a 2mm balance plug. 🔧 Features 5000mAh capacity 7.6V 2S LiPo configuration Silicon Graphene cell technology Low center of gravity design 120C peak discharge rating Excellent runtime, voltage, and punch Reduced internal resistance Cooler operating temperatures Increased cycle life 5mm bullet connectors 2mm balance plug Suitable for stock and modified racing Supports charge rates up to 3C 1C charge rate recommended for longest battery life ROAR Approved 📦 Includes (1) R1WURKS 5000mAh 120C 7.6V 2S LCG Shorty Silicon Graphene LiPo Battery 📊 Specifications Specification Details Brand R1WURKS SKU 030041 Battery Type Silicon Graphene LiPo Configuration 2S Nominal Voltage 7.6V Capacity 5000mAh Peak Discharge 120C Watt Hours 38Wh Max Charge Rate 3C Recommended Charge Rate 1C Main Connector 5mm Bullet Balance Connector 2mm Length 94.5mm Width 47mm Height 19.4mm Weight 176g ROAR Approved Yes  

Read more less