🛡️ Front-End Protection & Suspension SupportThe Losi Mini-T 2.0 Front Pivot & Bumper Set is a complete front-end assembly replacement designed to keep your suspension tight and your chassis protected. Whether you're rebuilding or upgrading, this kit includes everything needed to keep your Mini-T 2.0 or Mini-B handling like new. 🛠️ Includes: (1) Front Kickup Block (1) Front Hinge Pin Brace (2) Hinge Pins (1) Front Bumper (2) Set Screws ✅ Compatibility: Losi Mini-T 2.0 Losi Mini-B Ideal for racers and bashers looking to keep their front end strong and secure.

Read more less

🔧 Drop-In Ready Differential ReplacementKeep your rig running smooth with this pre-assembled Arrma V2 Differential – a direct replacement for your front or rear diff, built tough with steel internals for long-lasting durability and performance. 💥 Key Features: Fully pre-assembled for quick installation Heavy-duty steel internal gears & pins Built for maximum durability under extreme conditions Perfect for front or rear diff replacement 📦 Includes: (1) Differential V2 (30T) 💡 Pro Tip: Pair with fresh diff fluid for optimal traction and balance depending on your track or terrain!

Read more less

Team Losi Racing Mini-B Front Shock Springs (3.8lb/in) (2)Part #: TLR313002 🔧 Dial In Your SuspensionTuning your Mini-B for better performance just got easier. These 3.8lb/in front shock springs are perfect for racers looking to fine-tune their setup for different track conditions. Whether you're chasing more front grip or refining your handling, this upgrade delivers the precision you need. 🌀 Features: Spring rate: 3.8 lb/in Enhances front-end responsiveness Ideal for track-specific tuning Made from high-quality spring steel 📦 Includes: (2) Front Shock Springs 🎯 Compatibility: Losi Mini-B Give your Mini-B the edge it deserves with race-proven tuning parts!

Read more less

🛠️ Keep Your Mini Running SmoothThese replacement rear axles are designed specifically for the Losi Mini-T 2.0 and Mini-B platforms. Whether you're doing routine maintenance or recovering from a rough landing, this set of two rear axles will keep your ride performing at its best. 🔧 Features: Direct replacement parts for Mini-T 2.0 and Mini-B Durable construction built for bashing and racing Includes left and right rear axles 📦 Includes: (2) Rear Axles 🎯 Compatibility: Losi Mini-T 2.0 Losi Mini-B Stay race-ready and keep extra axles on hand for quick swaps!

Read more less

🏁 Bring the Heat Like Larson!Give your Losi NASCAR ride the look of a champion with the officially licensed Kyle Larson #5 HendrickCars.com 2024 Chevy Camaro body! Pre-painted and stickered straight from the factory, this 1/12-scale shell is ready to drop on for instant style and realism. 🛠️ Features: Officially licensed Kyle Larson #5 2024 NASCAR livery Durable polycarbonate construction Factory pre-painted with detailed decals Easy bolt-on fit for Losi 1/12 NASCAR chassis 📦 Includes: (1) Pre-Painted Kyle Larson #5 2024 Chevy Camaro Body with Decals 🎯 Compatibility: Losi 1/12 NASCAR (all 2024 & 2025 models) Add some pro flair to your race lineup with this aggressive and clean HendrickCars.com Camaro body!

Read more less

🔥 Race-Ready Look. Kyle Busch Style.Give your Losi NASCAR a bold refresh with the officially licensed #8 Lucas Oil Chevy Camaro body driven by none other than Kyle Busch! This pre-painted 2024 shell comes fully decked out with vibrant factory decals and a rear wing already installed — just bolt it on and hit the track in style. 🛠️ Features: Official 2024 #8 Kyle Busch Lucas Oil livery Factory-painted with pre-applied decals Pre-installed rear wing Direct fit for the Losi NASCAR platform 📦 Includes: (1) Pre-Painted Kyle Busch #8 Chevy Camaro Body (1) Rear Wing (installed) 🎯 Compatibility: Losi NASCAR (all 2024 & 2025 models) Stand out in the pack and rep a NASCAR legend with the perfect body upgrade for your Losi stock car!

Read more less

💥 Domed for Performance. Bleeder for Precision.Upgrade your suspension with the TLR Aluminum G3 Domed Bleeder Shock Caps, engineered for racers who demand consistent damping, better landings, and refined tuning. These precision CNC-machined aluminum caps are lightweight, durable, and a direct fit for G3 shock bodies found in the 22 5.0 AC, DC, SR, Elite, and 22X-4 kits. 🔧 Features: Domed internal shape mimics Gen2 caps for better shock action Enhanced support and improved landing characteristics Integrated bleeder design allows precise, mess-free bleeding CNC-machined aluminum for strength without the weight Fits G3 shock bodies used in 22 5.0 & 22X-4 platforms 📦 Includes: (2) Domed Bleeder Shock Caps Bleeder screws and seals (pre-installed) 💪 Whether you’re dialing in for high traction or big jumps, these caps give your suspension the edge it needs to perform at its best.

Read more less

🏁 Race-Grade Rigidity. Featherweight Performance.Take your Mini-B to the next level with the TLR Carbon Front Shock Tower. Crafted from ultra-lightweight, high-strength carbon fiber, this upgrade improves durability and precision while shaving unnecessary weight—perfect for racers chasing every millisecond. 🔧 Features: Lightweight carbon fiber construction Increased strength over stock plastic towers Rigid design improves suspension consistency Direct replacement for quick installation ✅ Compatibility:• Losi Mini-B Swap it in, feel the difference, and leave the competition behind.

Read more less

💥 Stronger Steering. Sharper Handling.Boost your Mini-B's performance with the TLR V2 Aluminum Front Camber Block. Designed to reduce flex and increase front-end rigidity, this precision-machined aluminum upgrade delivers more consistent handling and better durability for intense racing action. 🔧 Features: CNC-machined aluminum construction Improved rigidity for sharper camber control Reduces flex over stock plastic camber blocks Easy drop-in upgrade for racers and bashers alike ✅ Compatibility:• Losi Mini-B Built tough for the track—this upgrade is a no-brainer for serious Mini-B racers.

Read more less

💪 Lightweight Strength for Maximum PerformanceUpgrade your Mini-B with the TLR Carbon Rear Shock Tower, precision-cut from high-quality carbon fiber. This ultra-light, rigid shock tower replaces the stock composite part to reduce weight and improve suspension responsiveness—perfect for racers pushing their limits on the track. 🔧 Features: CNC-cut carbon fiber construction Incredibly lightweight yet strong and rigid Enhances suspension precision and durability Direct fit for easy installation ✅ Compatibility:• Losi Mini-B Less flex. Less weight. More performance. Bolt on a winning edge.

Read more less

🚀 Race-Ready Suspension UpgradeStep up your suspension game with these TLR Pre-Assembled Aluminum Rear Shocks—engineered for serious racers who want smoother damping and superior control. CNC-machined with threaded aluminum bodies and filled with shock oil from the factory, these are a no-hassle, high-performance upgrade for your Mini-B. 🔩 Features: All-aluminum threaded shock bodies for precision tuning Pre-filled with oil for consistent damping performance Bleed screw design for quick tuning and maintenance Fully assembled—just bolt on and go Provides improved traction, stability, and jump handling ✅ Compatibility:• Losi Mini-B Boost your Mini-B’s rear suspension with these premium shocks and get dialed in for the podium.

Read more less

💥 Drop-In Performance UpgradeUnlock precision and control with these TLR Pre-Assembled Aluminum Front Shocks—the ultimate bolt-on upgrade for your Mini-B. Featuring threaded aluminum bodies and a sealed oil-filled design, these shocks come fully assembled and pre-oiled for race-ready performance right out of the package. 🔧 Features: CNC-machined aluminum threaded shock bodies Sealed oil-filled design for consistent damping Pre-assembled with oil for plug-and-play install Bleed screw caps for easy maintenance and tuning Delivers smoother landings and improved handling ✅ Compatibility:• Losi Mini-B Whether you're tuning for track performance or just want better control, these shocks deliver pro-level results in a ready-to-run package!  

Read more less

Team Losi Racing Mini-B Rear Hub Carriers (2) – CVA Setup | Part #: TLR312001🏁 Precision-Tuned for CVA PowerUpgrade your Mini-B with these TLR Rear Hub Carriers, built specifically for setups using optional CVA driveshafts. Whether you're dialing in race handling or reinforcing your drivetrain, these carriers provide a clean fit and improved durability. 🔧 Features: Optimized for CVA-style driveshafts CNC-quality fit and finish Increases durability and drivetrain precision Includes left and right rear hub carriers ✅ Compatibility:• Losi Mini-B (with CVA setup) Perfect for racers looking to fine-tune their rear end performance and maximize drivetrain efficiency!

Read more less

Unlock instant throttle response and maximum efficiency with the Team Losi Racing 22X Slipper Eliminator Plates Set — the ultimate upgrade for stock class racers aiming to shave weight and dominate on high-traction tracks. 🔧 Features: Designed specifically for stock racing applications Lightweight CNC-machined aluminum construction Hard anodized for extra strength and sleek looks Eliminates slipper assembly for direct power transfer Reduces rotating mass for quicker acceleration Rigid design ensures consistent drivetrain performance 📦 Includes: (1) Aluminum Slipper Eliminator Plates Set ⚠️ Tech Note: Not recommended for modified racing due to increased drivetrain stress. ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Boost your 22X’s performance and durability with this CNC-machined Aluminum Gear Differential Cover from Team Losi Racing. Designed for racers who push their cars to the limit, this cover eliminates flex, protects your diff, and helps manage heat during hard off-road runs. 🔧 Features: CNC-machined aluminum for precision fit Improves heat dissipation during high-load conditions Rigid construction reduces flex and enhances handling Long-lasting protection for your gear differential Lightweight and race-tested 📦 Includes: (1) Aluminum Gear Differential Cover (1) Gasket (1) Spacer ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade or replace your buggy’s shocks with this set of Team Losi Racing 13mm Composite Shock Caps, built specifically for the 22X platform. Designed for precision fit and durability, these shock caps help keep your suspension smooth and race-ready. 🛠️ Features: Durable composite construction Direct fit replacement for 13mm shocks Lightweight design to maintain performance 📦 Includes: (2) 13mm Composite Shock Caps ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Keep your 22X buggy in race-ready condition with this Rear Wing Mount & Front Bumper Set. Designed for durability and fit, this OEM replacement set includes everything you need to restore or upgrade the rear wing assembly and front bumper of your TLR 22X platform. 🛠️ Features: OEM fit and finish for the TLR 22X series Includes full wing mounting hardware and front bumper Built for strength and stability under race conditions 📦 Includes: (1) Front Bumper (2) Rear Wing Mounts (2) Rear Wing Braces (2) Rear Wing Spacers ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Keep your TLR rig dialed in with this genuine 5.8mm Rod Ends Set for the 22X series. Whether you’re replacing worn parts or stocking your pit box, these rod ends are built to deliver precise fit and reliable durability on the track. 🔧 Features: Direct replacement for TLR 22X series vehicles High-strength material for long-lasting performance Perfect fit for your steering and suspension linkage needs 📦 Includes:(1) Complete 5.8mm Rod Ends Set ✅ Compatibility:• Losi 22X• Losi 22X-T  

Read more less

When strength matters, RPM delivers. These Heavy Duty Front A-Arms are a direct replacement for the stock arms on your Losi Mini-T 2.0 or Mini-B, but with a serious upgrade in durability. Built from RPM’s legendary engineering-grade nylon, they’re 25% thicker in the hinge pin boss and feature beefed-up support beams to protect your shock pivots from damage. 💪 Features: Front inner hinge pin boss is ~25% thicker than stock Overall arm thickness increased by ~25% Support beams are up to 50% thicker for better impact resistance Designed to take the hit before your shock pivot does Made from RPM’s ultra-durable nylon blend 📦 Includes:(1) Set of Heavy Duty Front A-Arms – Black ✅ Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Built for bashers, this RPM Wide Front Bumper delivers serious protection for your Losi Mini-T 2.0 or Mini-B. Measuring 3.5 inches across, it’s designed to be the first point of contact in a crash—shielding your front end, wheels, and chassis from damage. Whether you're racing or bashing, this is essential gear. 🛡️ Features: 3.5" wide design protects wheels and chassis Extended rear plate shields the aluminum chassis plate Durable RPM engineering-grade nylon construction Easy install, direct fit upgrade 📦 Includes:(1) Wide Front Bumper 🚫 Note:Not compatible with the original Losi Mini-T (use RPM73532 instead) ✅ Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Bring the heat to the oval with this officially licensed Goodyear® & NASCAR® tire set, made exclusively for your Losi® NASCAR® RC race car. Pre-mounted on sharp-looking gunmetal gray split-spoke wheels, these Pro-Line soft compound tires deliver realistic looks and competitive traction. 🟡 Features: Officially licensed by Goodyear® & NASCAR® Soft compound for improved grip and racing performance Yellow sidewall lettering for ultra-scale realism Pre-mounted on 8mm hex gunmetal split-spoke wheels Made in the USA by Pro-Line 📦 Includes:(4) Pre-mounted Goodyear Eagle NASCAR Cup Series Tires on Gunmetal Wheels• Front or Rear use 📐 Specs: Tire Height: 2.23" (57mm) Tire Width: 1.1" (28mm) Wheel Hex: 8mm Insert: Open Cell Foam Compound: Soft Color: Gun Metal Tread: Goodyear Eagle Slick 🚗 Compatibility:• All 2024 & 2025 Losi NASCAR RC Racecar models  

Read more less

Official Replacement Body for Losi NASCAR Refresh your ride with the Losi NASCAR Michael McDowell #34 2024 Ford Mustang Pre-Painted Body, featuring the striking Horizon Hobby livery. Designed specifically for the Losi NASCAR platform, this body comes pre-trimmed, pre-painted, and decal-applied—ready to install for a factory-fresh look. 🔧 Features: ✅ Officially licensed 2024 Ford Mustang NASCAR body✅ Pre-painted in Michael McDowell’s #34 Horizon Hobby scheme✅ Includes pre-installed decals for an authentic appearance✅ Rear wing pre-mounted for convenience✅ Durable polycarbonate construction for racing and display 📦 Includes: • (1) Pre-Painted Losi NASCAR Michael McDowell #34 Ford Mustang Body• (1) Pre-installed rear wing 🚗 Compatibility:  • Losi NASCAR platform

Read more less

Lock in serious traction with the Hot Racing Aluminum Differential Locker Spool for the Arrma Grom lineup. Designed to replace the front or rear diff, this CNC-machined aluminum spool forces both wheels on an axle to rotate together—perfect for crawling, bashing, or low-traction terrain where grip is everything. 🔧 Features: ✅ CNC-machined solid aluminum construction for strength and durability✅ Anodized red finish for corrosion resistance and a sleek look✅ Locks the differential for equal wheel speed and max traction✅ Ideal upgrade for low-traction, off-road environments 📦 Includes: • (1) Aluminum Differential Locker Spool Set 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom 💡 Note: Recommended for use on loose surfaces. On high-traction terrain, driveline stress may increase.

Read more less

Keep your RC ride race-ready with this pack of Arrma 2.5x8mm Cap Head Screws. Designed as a direct replacement for stock hardware, these high-quality screws are a must-have for routine maintenance or repairs. 🔧 Features: ✅ Precision-made 2.5x8mm cap head screws✅ Ideal for replacing worn or stripped hardware✅ Durable steel construction for lasting performance 📦 Includes: (10) 2.5x8mm Cap Head Screws 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi NASCAR

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

Upgrade your 22X with precision-engineered Stiffezel rear suspension arms for enhanced control, reduced flex, and improved handling on high-bite tracks. Designed for serious racers, these 75mm arms deliver extra rigidity and durability to dominate high-traction surfaces. 🔧 Features:✅ Stiffer than stock for more precise handling✅ Reduced flex improves suspension response✅ Optimized for high-traction surfaces✅ Increased durability for aggressive racing 📦 Includes:• (2) 22X Stiffezel Rear Suspension Arms (75mm) 🚗 Compatibility:• TLR 22X Get the control and consistency you need with this must-have upgrade for competitive racing.

Read more less

Upgrade or replace the wheel hexes on your Mini‑T 2.0 for reliable performance and secure wheel fitment. This set includes two wheel hexes and cross pins for an exact fit on Losi Mini‑T 2.0 and also works with the Losi Mini‑B platform. 🔧 Features:✅ Direct fit swap for stock wheel hexes on Mini‑T 2.0/ Mini‑B✅ Includes (2) steel wheel hexes + cross pins—ready to install✅ Durable, precision-molded design to reduce slop and improve steering response 📦 Includes:• (2) Wheel Hexes• (2) Cross Pins 🚗 Compatibility:• Losi Mini‑T 2.0• Losi Mini‑B Be race-ready with replaceable wheel hexes designed to handle impacts and maintain precise wheel alignment.

Read more less

Toughen up your rig with these Arrma 4x95mm Steel Turnbuckles—engineered for durability, precision, and quick adjustments. Whether you're bashing hard or dialing in performance, these turnbuckles deliver serious strength and setup flexibility. 🔧 Features:✅ Super-tough steel construction for long-lasting durability✅ Precision threads for smooth installation and easy adjustment✅ Built-in adjuster for quick and accurate setup changes✅ Sleek black finish for that aggressive, factory look 📦 Includes:(2) 4x95mm Steel Turnbuckles 🚗 Compatibility:• Arrma Big Rock 6S BLX• Arrma Fireteam 6S BLX• Arrma Kraton 6S BLX• Arrma Notorious 6S BLX• Arrma Outcast 6S BLX

Read more less

Upgrade your rear suspension geometry with the JConcepts Aluminum HRC "D Block" Arm Mount. Designed for the RC10B7/B7D, this mount raises the hinge pin height for a higher roll center, offering improved stability and cornering response on high-traction surfaces. Built from premium 7075 aluminum, it's strong, precise, and ready for race-day abuse. Features:• Raises hinge pins for High Roll Center (HRC) tuning• Precision-machined 7075 aluminum construction• Compatible with Team Associated pill inserts• Enhances control over toe, anti-squat, and wheelbase• Lightweight and race-proven design• Anodized finish in your choice of blue or black• Laser-etched JConcepts logo and chamfered edges for a clean, factory look Includes (1) Aluminum HRC “D Block” mount. A must-have for advanced buggy setups.

Read more less

Step up your oval game with the JConcepts 9 Shot Rear Wheels! Inspired by full-size Sprint and Late Model cars, these wheels bring pro-level scale looks and serious performance to your 1/10 buggy. Built for dirt oval dominance with a 12mm hex fit for B6.1, XB2, RB7, YZ2, and more. Features:• Aggressive 9-spoke 1:1 inspired design with mock 5-lug detail• Fits 12mm hex rear axles – compatible with most 1/10 dirt oval platforms• Durable molded construction with vent holes for better glue control• Sleek concave dish shape for maximum strength and style• Includes 4 wheels per pack• Available in White (3398W), Yellow (3398Y), or Black (3398B)  

Read more less

Give your dirt oval racer the pro look with JConcepts 9 Shot Wheels. Inspired by full-scale sprint and late model designs, these wheels feature deep 3D spokes with a mock 5-lug bolt pattern, delivering aggressive style and ROAR-legal performance. Designed for 1/10 buggies like the B6.1, XB2, RB7, and YZ2 running a 12mm hex. Features:• 1:1 inspired 9-spoke styling with scale detail• Deep concave design with molded bolt pattern• Fits 12mm hex – compatible with B6.1, XB2, RB7, YZ2, and more• Includes 4 wheels per pack• Available in Yellow (3397Y), White (3397W), and Black (3397B)• Molded glue catch for clean tire installs• Built from durable materials using precision manufacturing  

Read more less

Take control on high-traction tracks with the JConcepts Fuzz Bite stadium truck tires. Featuring a low-profile carcass and reverse “water tower” pin layout, these tires are built for speed, grip, and consistent cornering. Whether you're on tight-knit turf or office carpet, the radius-positioned pins dig in with precision, delivering killer forward bite and long-lasting performance. Comes with plush open cell inserts for optimal support. Features:• Low-profile carcass for faster transitions• Reverse “water tower” pin shape for precision grip• Radius-positioned pin layout for consistent traction• Directional sidewall lugging for confident cornering• Lightweight scalloped tire beads reduce rotating mass• Includes open cell inserts

Read more less

Designed for performance and durability, the JConcepts Carpet | Turf | Dirt Wing is a scaled-down version of their championship-winning 1/10 wing—tailored specifically for the Losi Micro-B. Built for racers chasing optimal rear-end stability across carpet, turf, and dirt, this upgraded wing offers increased downforce and improved handling. 🔧 Why It Stands Out:• Longer chord design = more rear grip• Tall side-dams improve straight-line stability• High rear gurney for added traction and control• Built from genuine polycarbonate for lightweight strength• Direct-fit upgrade for the Losi Micro-B• Manufactured in the USA by JConcepts 💥 Whether you're tearing up tight carpet layouts or attacking dusty outdoor tracks, this wing gives your Micro-B the extra grip it craves! 📦 Includes:(1) Carpet | Turf | Dirt Wing – Clear (unpainted)Trim and mount to preference.

Read more less

Take your Mini-B to the next level with the JConcepts High Clearance Wing, built for serious performance on carpet and Astroturf tracks. Engineered specifically for the Losi Mini-B, this wing delivers the ideal balance of low drag and high downforce, helping you stay planted while maintaining nimble rotation. 🏁 Performance-Driven Features:• High-clearance, short-chord design for quicker rotation• Durable polycarbonate with clipped rear corners for improved rigidity• Large side cutouts for tire flex and rear-end expansion• Dual stability fangs increase wing strength and control• Vertical rear dam enhances high-speed stability• Pre-marked cut-lines for easy trimming and fine-tuning 📦 Includes:• (2) High Clearance Carpet/Astro Wings for Losi Mini-B 🔧 Part Number: 0502💡 Bolt-on ready. Ideal for Mini-B racers chasing that perfect rear grip on high-traction surfaces!

Read more less

Team Associated RC10B74.1 Factory Team Aluminum Rear Hubs (Blue or Black) – 92270 / 92271Upgrade your B74.1 with these precision-machined Factory Team aluminum rear hubs! Whether you're after the slick anodized blue or stealthy black finish, these hubs deliver durability, style, and performance. Designed with dual set screws to eliminate play and keep your rear end locked in during intense racing action. Compatible with a wide range of Associated platforms including B74.1, B74.1D, T6.2, and SC6.2. ✔️ Available in Blue (92270) or Black (92271)✔️ CNC aluminum with laser-etched FT logo✔️ Dual set screw design for rock-solid mounting✔️ Direct replacement for ASC92267 hubs✔️ Fits multiple Associated platforms✔️ Weight: 8.5g each Built for racers who demand strength and consistency. 💪  

Read more less

1RC Racing Pre-Mounted 1/18 Super Modified Hoosier Tires (Black) (Soft) – 1RC5567Upgrade your 1/18 Super Modified with these pre-mounted Hoosier tires! Built for scale realism and traction, these tires feature detailed tread, sidewall logos, and sleek black oval-style wheels for that aggressive oval track look. ✔️ Soft compound for maximum grip✔️ Scale tread + Hoosier sidewall detail✔️ Mounted on black oval-style wheels✔️ Designed specifically for 1RC Super Modified 4.0⚠️ *Front wheels do not include bearings (#1RC8503) Includes:• (2) Rear Tires (Soft Compound)• (2) Front Tires (Soft Compound) 🔥 Oval performance that looks as good as it hooks!    

Read more less