🔋 Boost Your Power System the Right WayThis complete BEC (Battery Eliminator Circuit) kit from Traxxas delivers stable, regulated power directly to your electronics. Whether you're upgrading for higher torque servos or better voltage regulation, this kit has everything you need for a clean install. 🧰 Includes: Battery Eliminator Circuit (BEC) Receiver box cover Bind plug Wire clamp O-ring (3) Foam pads Y-harness (2) 2.5x8mm CS screws Silicone grease (1) Zip tie ✅ Compatibility: Traxxas Rustler 4x4 Traxxas TRX-4 Traxxas TRX-6 Keep your rig powered, protected, and running at peak performance with this all-in-one BEC solution. ⚡💪

Read more less

Fits Mini Maxx & Mini XRTAvailable in: Gray, Orange, Red, Blue, and Green 💥 Boost Strength & StyleUpgrade your suspension with these 6061-T6 aluminum stub axle carriers from Traxxas. Designed for the left and right rear corners, they offer serious durability and a sharp anodized finish that looks as good as it performs. 🔧 Features: Machined from high-grade 6061-T6 aluminum Brilliant anodized finish in your choice of Gray, Orange, Red, Blue, or Green Provides added strength and precision ✅ Factory fit for Traxxas Mini Maxx & Mini XRT Includes 3x12mm screws (4) & 3x15mm screws (2) Whether you're after performance or style—this upgrade delivers both. 💪🔥

Read more less

Also available in Gray, Orange, Red, Green, or Blue 💪 Unmatched Durability. Precision Handling.Upgrade your steering game with Traxxas 6061-T6 aluminum steering blocks. Designed for ultimate strength and crisp responsiveness, these factory-fit hop-ups deliver enhanced control and killer style. 🚗 Features: CNC-machined from 6061-T6 aluminum Anodized finish for corrosion resistance and high-end looks Includes mounting hardware: (4) 3x12mm screws & (2) 3x15mm screws Perfect factory fit – no mods required Fits left & right – full front-end upgrade in one kit ✅ Compatible with Traxxas Mini Maxx and Mini XRT Built by Traxxas, for Traxxas – because performance and reliability come standard.

Read more less

🔥 Pure Performance in Every Joint.Step up your soldering game with PUREFUSION™—the elite, lead-free solder designed for high-performance RC, drone, and electronics work. This Sn99.3Cu0.7 alloy delivers ultra-low resistance, superior flow, and a clean, consistent melt for pro-level connections every time. 🧪 Specs: Alloy: Sn99.3Cu0.7 (Lead-Free) Diameter: 1.0mm Flux Core: Rosin, No-Clean Melting Point: ~227°C Conductivity: Optimized for high-current, low-loss joints Residue: Minimal & non-corrosive 🛠️ Includes: 15g compact travel tube – ideal for pit bags, toolboxes, and field kits 💡 Why PureFusion? Ultra-low oxidation Superior wetting & flow Designed for clean, professional results—no mess, no compromise 💥 Whether you're rewiring on the bench or fixing in the field, PUREFUSION keeps your connections solid and your builds clean.  

Read more less

Exalt Z-RoX 21.5T Fixed Timing Spec Motor – 30° Locked TimingPart #: EXA1215LT 🔧 Zero excuses. Just skill. The Exalt Z-RoX 21.5T motor delivers pure spec racing performance with locked 30° timing to keep the playing field level and the racing tight. Engineered for consistency and built to last, it’s the motor that puts driving and setup back in the spotlight—right where it belongs. 🏁 Features: Fixed 30° timing for locked-in fairness 21.5T winding – designed for true spec-class performance 100% rebuildable with tight QC tolerances Optional 40° & 50° endplates available (sold separately) Sleek, aggressive design – looks fast, runs faster Ideal for clubs, promoters, and competitive racers 📦 The spec is in the motor—not in the margins.Leave the tweaking behind. With Z-RoX, your performance speaks for itself.

Read more less

🏁 Throw it back to the '90s with style! This officially licensed 1990 Chevy Lumina body delivers iconic NASCAR® looks for your Losi 1/12 racecar. Pre-cut and ready for your favorite paint scheme, it includes a custom rear spoiler and authentic decal sheet for maximum scale detail. 🛠️ Features: Official NASCAR® & Chevy® licensed Pre-cut for quick and easy install Includes custom rear spoiler & decal sheet Built-in overspray film for clean paint lines Made from durable crystal-clear polycarbonate Made in the USA by Pro-Line! 📦 Specs: Length: 15.75" (400mm) Width: 6.75" (171mm) Height: 3.7" (94mm) Scale: 1/12 Fits: All 2024–2025 Losi NASCAR® 1/12 models  

Read more less

Freshen up your Grom with this official Arrma Granite Grom Body Accessory Set! Perfect for replacing worn-out or damaged parts, or customizing your Granite Grom's look. ✅ Direct fit for the Granite Grom🛠️ OEM replacement – hassle-free installation📦 Includes all necessary body accessories Keep your Grom looking sharp and ready for action with this factory-original upgrade!

Read more less

Upgrade your workbench with this premium 3-piece anti-static precision tweezer set—perfect for handling tiny parts in electronics, soldering, and RC repair. Includes:• (3) Stainless Steel Tweezers – Assorted Tip Styles• Anti-static coating for ESD-sensitive components• Protective caps for safe storage Features:✔ Non-magnetic stainless steel✔ Anti-static finish protects delicate electronics✔ Precision tips for tight spaces and fine work✔ Ideal for RC repairs, soldering, jewelry, and modeling Professional control, zero frustration. Handle the small stuff with precision.  

Read more less

🔧 Clean, precise holes—every time. The BOOF RC Body Reamer is the go-to tool for drilling accurate body post holes in your RC car, truck, or aircraft shell. Whether you're mounting a fresh body or making quick adjustments, this durable tool gets the job done with ease. Features:✔ Hardened steel tapered tip for precision reaming✔ Ergonomic anti-slip handle for firm grip and control✔ Measurement marks for consistent hole sizing✔ Ideal for Lexan and other polycarbonate body shells Perfect for:• RC cars & trucks• RC airplanes• Custom shell mounting and mods 💥 No more guesswork—just smooth, accurate results.BOOF RC – Tools that keep you in the race.

Read more less

🔧 Built tough. Designed smart. The BOOF RC Multipurpose Wrench is your go-to tool for easily removing stubborn ball joints and more—essential for any RC enthusiast's toolbox! Features:✔ Durable high-hardness metal construction✔ Easily removes stubborn ball heads with precision✔ Compact and easy to handle—saves serious time on repairs✔ Excellent wear resistance and long service life✔ Available in Red or Blue to match your pit style Perfect for:• RC car repairs• Ball joint removal• Quick maintenance at the track or workshop 💥 Whether you're racing or wrenching, this is the must-have tool for your pit box!BOOF RC – Tools that win.    

Read more less

Maintain and repair your rig with precision! This 7-in-1 driver set is built for convenience, performance, and durability—designed specifically for small-scale RC models like SCX24 and TRX4M. Includes:• Hex Tips: 0.05", 1.5mm, 2.0mm• Phillips Tip: 2.0mm• Nut Drivers: 4.0mm, 5.0mm, 5.5mm Features:✔ No need to swap bits—7 dedicated tools✔ Slip-resistant aluminum handles for solid grip✔ Precision HSS steel tips for exact fit and long wear✔ Compatible with: Axial SCX24, Traxxas TRX4M, Losi Mini-T 2.0, Tamiya, and more! 🛠️ The perfect tool kit for 1/24 & 1/18 RC scale cars.BOOF RC – Built to wrench. Ready to race.    

Read more less

Professional-grade CA glue designed for precise tire mounting and long-lasting bonds. Medium-viscosity formula for controlled application, with a precision tip included for clean, accurate gluing. Perfect for RC tires and general hobby use. ✅ 10g bottle with precision glue tip✅ Ideal for tire mounting & general use✅ Medium-viscosity for easy control✅ Pro-level strength and reliability✅ Not foam-safe

Read more less

Protect your workspace and make every cut count with the Excel Self-Healing Cutting Mat. Designed for hobbyists, crafters, and designers, this 18x24" mat features a self-healing surface that absorbs cuts from sharp tools, preserving the mat and extending its life. With a 1" grid pattern for precise alignment and durable flexible PVC construction, it’s a must-have for any serious project bench. 🟢 Key Features: Self-healing surface absorbs cuts and retains smoothness 1" grid pattern ensures accurate cuts and measurements Protects your workspace from blade damage Made from high-quality flexible PVC for long-term use Ideal for hobby, craft, design, and modeling projects 📐 Specifications: Size: 18" x 24" Material: Flexible PVC Color: Green Includes: (1) Cutting Mat 🛠️ A reliable, precision-friendly surface for every sharp project you take on.

Read more less

Upgrade your micro servo for maximum durability! The Traxxas 2082R metal gear set is a direct replacement for the 2080R waterproof micro servo and can also be used to upgrade the 2080A servo—just swap out all the gears. 💪 Features: Hardened steel construction for superior strength and wear resistance Ideal for high-stress applications and extreme conditions Factory replacement for the Traxxas 2080R waterproof micro servo Upgrade option for 2080A servos (must replace all internal gears) 📦 Includes: (1) Complete Metal Gear Set (1) Packet of lithium grease for smooth operation Boost your steering performance and reliability—perfect for intense bashing or racing!

Read more less

  Keep your servo running like new with this genuine replacement gear set for the Traxxas 2080 Micro Waterproof Servo. Whether you're repairing worn or stripped gears, this kit is the perfect fix to restore smooth and precise performance. 🔧 Features: Direct replacement for Traxxas 2080 micro waterproof servo Includes all internal gears needed for a full rebuild Maintains waterproof integrity when used with proper installation Made from durable materials for long-lasting performance 📦 Includes: Complete internal gear set for the 2080 servo Don’t let stripped gears slow you down—refresh your servo and get back on track!

Read more less

Upgrade your suspension with the premium GT-Maxx Aluminum Shocks from Traxxas, available in vibrant anodized finishes to match your style! These high-performance shocks are a direct replacement for the front of the Traxxas Sledge and also compatible with the Traxxas Maxx when equipped with GT-Maxx hardware. 💥 Features: Heavy-duty aluminum shock bodies for maximum durability Available in Blue, Red, Orange, or Green anodized finishes Pre-assembled for easy installation Tuned for performance and control on rough terrain Designed to withstand high-impact bashing 📦 Includes: (2) GT-Maxx Aluminum Front Shocks (pre-assembled) ⚠️ Note: Shock springs are not included and must be purchased separately. Customize your ride and take control with GT-Maxx shocks—built for serious performance!

Read more less

Conquer any terrain with confidence! These ultra-rugged Sledgehammer® tires deliver unstoppable traction and aggressive performance on loose, muddy, or uneven ground. Pre-mounted on 2.8" dual-profile black Maxx® wheels with a beadlock-style ring, they’re ready to take your Maxx to the next level. 🛠 Features: Open block tread for extreme off-road traction Increased diameter for more ground clearance TSM®-rated for high-speed stability Pre-glued with foam inserts on black Maxx wheels Fits 17mm splined hex hubs, front or rear 📦 Includes: (2) Sledgehammer Tires pre-mounted on 2.8" Black Maxx Wheels Built to bash. Designed to dominate. Perfect for serious Maxx® off-road action.

Read more less

Fine-tune your Maxx® suspension with these GT-Maxx shock springs rated at 2.054 for a firmer feel and improved support under load. Ideal for heavier setups or aggressive terrain, these springs deliver the responsiveness and control your truck needs. ⚙️ Features: Spring Rate: 2.054 (firmer feel) Designed for GT-Maxx shocks Great for heavier setups or harder landings (2) high-performance springs per package 📦 Includes: (2) GT-Maxx Shock Springs (2.054 Rate) Customize your ride and dial in the perfect feel with Traxxas performance springs!  

Read more less

Keep your Maxx® running strong with these genuine Traxxas replacement stub axle carriers. Designed for durability and precise fit, this left and right set restores smooth performance to your rear suspension system. 🔧 Features: Direct replacement parts for Traxxas Maxx Includes both left and right stub axle carriers Molded for strength and reliability Helps maintain proper alignment and smooth operation 📦 Includes: (1) Left Stub Axle Carrier (1) Right Stub Axle Carrier A must-have spare for racers and bashers—ensure your Maxx stays race-ready and trail-tough!

Read more less

Upgrade your Maxx® with the strength and control of the Traxxas Steel Steering Servo Horn. Built tough for extreme bashing and high-power servos, this steel horn replaces the stock part for maximum durability and precise steering performance. 💪 Features: CNC-machined steel construction for superior strength Eliminates flex for consistent steering response Ideal for high-torque servo upgrades Direct fit for the Traxxas Maxx® 📦 Includes: (1) Steel Steering Servo Horn Take command of your Maxx with confidence—this heavy-duty horn is ready for serious action.

Read more less

Keep your steering sharp and responsive with this genuine Traxxas replacement servo horn and linkage set for the Maxx 1/10 Brushless Monster Truck. Whether you're upgrading or replacing worn components, this factory-assembled set ensures a precise fit and reliable performance. 🔧 Features: Direct replacement for stock Maxx components Factory-assembled 46mm linkage rod for hassle-free installation Designed to maintain smooth, accurate steering response 📦 Includes: (1) Servo Horn (1) 46mm Linkage Rod (pre-assembled) A must-have spare for every Maxx owner—stay ready for action with dependable OEM parts from Traxxas.

Read more less

Restore the strength and precision of your Maxx’s front suspension with this genuine Traxxas Front Shock Tower set. Includes both left and right halves of the front shock tower, made from durable composite material to withstand big jumps and hard landings. 🔧 Features: Direct replacement for the Traxxas Maxx 1/10 Brushless Monster Truck Includes left and right front shock tower halves Molded from tough composite for impact resistance Provides secure mounting points for shocks and upper suspension arms 📦 Includes: (1) Left Front Shock Tower Half (1) Right Front Shock Tower Half Built for bashers. Trusted by racers. Get your Maxx back on track with Traxxas original parts.

Read more less

Keep your Maxx strong and reliable with the Traxxas 8928 Rear Bulkhead, a genuine replacement part designed for durability and precision. This set includes both the upper and lower rear bulkhead halves, ensuring a perfect factory fit and seamless installation on your Maxx 1/10 Brushless Monster Truck. 🔧 Features: Genuine Traxxas replacement part Includes rear upper and lower bulkhead halves Molded from high-quality composite material for strength and durability Designed specifically for the Traxxas Maxx 1/10 Brushless Monster Truck 📦 Includes: (1) Upper Rear Bulkhead Half (1) Lower Rear Bulkhead Half Whether you're repairing crash damage or doing a full rebuild, this bulkhead set will keep your Maxx in peak form.

Read more less

Keep your Maxx tough where it counts! The Traxxas 8926 Front Bulkhead Tie Bar is a direct replacement part designed to reinforce the front end of your Maxx 1/10 Brushless Monster Truck. Made from strong steel, this set includes one upper and two lower tie bars to help maintain chassis strength during heavy-duty action. 🔩 Features: Genuine Traxxas replacement part Durable steel construction for added strength Helps prevent bulkhead flex and damage under hard impacts Precision fit for the Traxxas Maxx 1/10 Brushless Monster Truck 📦 Includes: (1) Upper Steel Tie Bar (2) Lower Steel Tie Bars Built for bashing? Keep your Maxx together with this must-have front-end reinforcement!

Read more less

Upgrade your X-Maxx or XRT with premium durability and style! These gray-anodized 6061-T6 aluminum suspension pin retainers offer enhanced strength and a sleek factory look. Designed to replace the stock plastic retainers, they hold the hinge pins securely at the inner upper arm position for reliable, long-lasting performance. 🔥 Includes: (4) Gray-Anodized Aluminum Suspension Pin Retainers 🏁 Features: CNC-machined from high-quality 6061-T6 aluminum Anodized gray finish for a clean, custom look Direct fit for Traxxas X-Maxx and XRT Stronger and more wear-resistant than stock plastic retainers Step up your durability game while giving your rig a custom touch with these Traxxas aluminum retainers!

Read more less

Keep your RC running smooth and efficient with this pair of Traxxas 6x13x5mm Ball Bearings. Designed as direct replacements, these high-quality bearings reduce friction and improve performance wherever they’re used. 🛠️ Features: Genuine Traxxas replacement part Precision 6x13x5mm ball bearings Helps maintain smooth and reliable drivetrain operation Perfect for maintenance or upgrades Includes:(2) 6x13x5mm Ball Bearings A simple upgrade that makes a big difference in durability and speed—don’t hit the track without them!

Read more less

Dial in your gear ratio with this precision-cut 23-tooth 32-pitch pinion gear from Traxxas. Designed for motors with a 3mm shaft, this gear delivers smooth, efficient power transfer for high-performance setups. 🔧 Features: 23T pinion gear with 32-pitch tooth profile Precision-machined steel for strength and durability 3mm bore – fits standard 3mm motor shafts Includes set screw for secure mounting Perfect for:Upgrading or tuning your gear ratio for more top-end speed or specific track conditions. Includes: (1) 23T 32-pitch pinion gear (1) Set screw Whether you’re fine-tuning for speed or replacing a worn gear, this Traxxas pinion is built to perform.  

Read more less

Give your 1/18 scale Asphalt Truck the protection it deserves with this replacement front bumper from 1RC Racing. Designed for durability and direct fit, it's perfect for keeping your rig race-ready. Includes: (1) Front Bumper Compatibility: 1RC Racing 1/18 Asphalt Late Model Truck Built tough for short track racing action!      

Read more less

Upgrade your suspension with RPM’s high-performance A-arms for the Traxxas Slash and Stampede 4x4! These arms are a game-changer — lighter, stronger, and far more precise than stock. Features: Eliminates slop in the suspension system Tightens tolerances around hinge pins by over 90% Reduces unwanted fore/aft movement for better stability Drops 6.5g per A-arm — nearly 1 oz weight savings per truck! Reinforced bosses for shock and sway bar mounting Iconic RPM styling with 30° leading/trailing edges Molded from RPM’s legendary ultra-durable nylon Available in Black, Red, Green, or Blue Note: Each package includes 1 left and 1 right A-arm Two packages are required to complete one full truck (front and rear) Rear A-arms do not support the upper hinge pin hole of aftermarket axle carriers Proudly made in the USA.

Read more less

🔥 Upgrade Your Steering for Precision and Power Take control of your Losi Mini with the Hot Racing Aluminum Steering Bellcrank. Built from high-quality 6061-T6 aluminum, this upgrade replaces the stock plastic bellcrank to deliver smoother, more precise steering response and unbeatable durability. Whether you're bashing or racing, this is a must-have performance enhancement. ⚙️ Features: CNC-machined 6061-T6 aluminum for maximum strength and style Ball bearing-supported for ultra-smooth steering action Replaces weak factory plastic for improved precision Black anodized finish for a sleek, professional look 📦 Includes: (2) Aluminum Bellcranks (1) Bellcrank Tie Rod (4) Ball Bearings (2) Stainless Steel Bearing Posts Mounting Hardware 🔧 Compatibility: Losi Mini-B Losi Mini-T 2.0

Read more less

🏁 Dominate the Corners with Added Rear Grip The HackFab Brass Rear Hub is a game-changing upgrade for Losi Mini-T 2.0 and Mini-B racers. Designed with oval racing in mind, this heavy-duty brass hub adds 23.57 grams of unsprung weight to keep your left rear planted through high-speed corners. Built with extra material and “ears” for max mass, it’s the perfect performance booster for high-bite tracks. ⚙️ Features: Adds weight where it counts: +23.57g of unsprung mass Drop-hub design for enhanced adjustability Improves drive-off and cornering stability Ideal for high-traction oval racing 📦 Includes: (1) Brass Rear Hub 🔧 Compatibility: Losi Mini-B Losi Mini-T 2.0Note: Not compatible with TLR Mini-B CVAs (larger inner bearing). May require shimming when used with MIP axles.

Read more less

🛡️ Front-End Protection & Suspension SupportThe Losi Mini-T 2.0 Front Pivot & Bumper Set is a complete front-end assembly replacement designed to keep your suspension tight and your chassis protected. Whether you're rebuilding or upgrading, this kit includes everything needed to keep your Mini-T 2.0 or Mini-B handling like new. 🛠️ Includes: (1) Front Kickup Block (1) Front Hinge Pin Brace (2) Hinge Pins (1) Front Bumper (2) Set Screws ✅ Compatibility: Losi Mini-T 2.0 Losi Mini-B Ideal for racers and bashers looking to keep their front end strong and secure.

Read more less

🔧 Drop-In Ready Differential ReplacementKeep your rig running smooth with this pre-assembled Arrma V2 Differential – a direct replacement for your front or rear diff, built tough with steel internals for long-lasting durability and performance. 💥 Key Features: Fully pre-assembled for quick installation Heavy-duty steel internal gears & pins Built for maximum durability under extreme conditions Perfect for front or rear diff replacement 📦 Includes: (1) Differential V2 (30T) 💡 Pro Tip: Pair with fresh diff fluid for optimal traction and balance depending on your track or terrain!

Read more less

Team Losi Racing Mini-B Front Shock Springs (3.8lb/in) (2)Part #: TLR313002 🔧 Dial In Your SuspensionTuning your Mini-B for better performance just got easier. These 3.8lb/in front shock springs are perfect for racers looking to fine-tune their setup for different track conditions. Whether you're chasing more front grip or refining your handling, this upgrade delivers the precision you need. 🌀 Features: Spring rate: 3.8 lb/in Enhances front-end responsiveness Ideal for track-specific tuning Made from high-quality spring steel 📦 Includes: (2) Front Shock Springs 🎯 Compatibility: Losi Mini-B Give your Mini-B the edge it deserves with race-proven tuning parts!

Read more less

🛠️ Keep Your Mini Running SmoothThese replacement rear axles are designed specifically for the Losi Mini-T 2.0 and Mini-B platforms. Whether you're doing routine maintenance or recovering from a rough landing, this set of two rear axles will keep your ride performing at its best. 🔧 Features: Direct replacement parts for Mini-T 2.0 and Mini-B Durable construction built for bashing and racing Includes left and right rear axles 📦 Includes: (2) Rear Axles 🎯 Compatibility: Losi Mini-T 2.0 Losi Mini-B Stay race-ready and keep extra axles on hand for quick swaps!

Read more less

🏁 Bring the Heat Like Larson!Give your Losi NASCAR ride the look of a champion with the officially licensed Kyle Larson #5 HendrickCars.com 2024 Chevy Camaro body! Pre-painted and stickered straight from the factory, this 1/12-scale shell is ready to drop on for instant style and realism. 🛠️ Features: Officially licensed Kyle Larson #5 2024 NASCAR livery Durable polycarbonate construction Factory pre-painted with detailed decals Easy bolt-on fit for Losi 1/12 NASCAR chassis 📦 Includes: (1) Pre-Painted Kyle Larson #5 2024 Chevy Camaro Body with Decals 🎯 Compatibility: Losi 1/12 NASCAR (all 2024 & 2025 models) Add some pro flair to your race lineup with this aggressive and clean HendrickCars.com Camaro body!

Read more less