Team Associated RC10B74.2 Center Bulkhead & Brace Set (Decoupled Slipper) – ASC92378 Essential Support for Decoupled Slipper Installations Upgrade or replace with confidence using the Center Bulkhead and Brace Set designed specifically for the RC10B74.2 when equipped with the Factory Team Decoupled Slipper system. This set ensures precise fitment and rigidity where it matters most, helping maintain drivetrain alignment and chassis stability under racing conditions. ⚙️ Features: ✅ Designed for Decoupled Slipper Configuration ✅ Strong and Lightweight – Keeps driveline secured under high load ✅ Direct Fit for RC10B74.2 ✅ Factory Team Grade Components 📦 Includes: (1) Center Bulkhead (1) Center Brace ✅ Compatibility: Team Associated RC10B74.2 Works in conjunction with: ASC92377 – Servo Mount Set (Decoupled Slipper) ASC92379 – FT Decoupled Slipper Kit 🛠️ A must-have component for racers running the decoupled slipper—engineered to support performance and reliability!

Read more less

Team Associated FT Center CVA Bone 45.5mm (for Decoupled Slipper) – ASC92371 Factory-Grade Drivetrain Performance The 45.5mm Factory Team Center CVA Bone is designed for use with the RC10B74.2 and B74.2D when equipped with the FT Decoupled Slipper system. This lightweight and durable center bone provides smooth and efficient power transfer, helping reduce rotational mass for optimized drivetrain performance in 13.5T class racing. ⚙️ Features: ✅ 45.5mm Length – Perfect fit for use with the FT Decoupled Slipper system ✅ Precision Machined – Ensures smooth operation and tight tolerances ✅ Lightweight Design – Reduces rotational mass for faster acceleration ✅ Factory Team Quality – Built for competition use 📦 Includes: (1) 45.5mm Center CVA Bone ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D Use with ASC92367 FT Decoupled Slipper Outdrive 🔁 Ideal for racers running the lightweight driveline setup—maximize performance and consistency on the track!

Read more less

Team Associated FT Decoupled Slipper Spring – ASC92369 Precision Tuning for Decoupled Slipper Setups The Factory Team Decoupled Slipper Spring is specifically designed for use with the RC10B74.2 FT Decoupled Slipper Outdrive system. It provides the optimal preload and compression characteristics needed to fine-tune your decoupled slipper clutch for consistent, race-ready performance. ⚙️ Features: ✅ Precision-Calibrated Spring – Matches the performance needs of the FT Decoupled Slipper ✅ Factory Team Quality – Built for durability and consistent response ✅ Improved Slipper Feel – Enhances tuning range for racers demanding control 📦 Includes: (1) Decoupled Slipper Spring ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D Use with ASC92367 FT Decoupled Slipper Outdrive 🛠️ A must-have for racers utilizing the decoupled slipper system to push their B74.2 to the limit.

Read more less

Team Associated FT Decoupled Slipper Outdrive w/ One-Way – ASC92367 Decoupled Control. Tuned Performance. Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Outdrive, featuring an integrated one-way bearing. This option allows the front drivetrain to coast during off-throttle moments, improving corner entry stability and overall drivability—especially beneficial on high-bite surfaces. ⚙️ Features: ✅ One-Way Bearing Design – Allows the front end to freewheel when off throttle ✅ Decouples Braking Force – Rear-focused braking for improved cornering balance ✅ CNC-Machined Precision – Factory Team quality and durability ✅ Designed for serious 4WD racers looking to fine-tune handling characteristics 📦 Includes: (1) Decoupled Slipper Outdrive w/ Integrated One-Way Bearing ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🧩 Ideal for racers aiming to extract maximum tuning potential from their 4WD buggy platform.

Read more less

Team Associated RC10B7 HD Ball Differential Outdrive Set – ASC92453 Heavy Duty Upgrade for Peak Performance The HD Ball Differential Outdrive Set is a direct replacement for your Team Associated RC10B7, designed to handle the demands of competitive racing. Built for durability and strength, these outdrives are ideal for racers who push their 1/10 scale buggies to the limit. ⚙️ Features: ✅ Heavy duty design for improved durability ✅ Compatible with the RC10B7 ball differential ✅ Precision machined for smooth operation ✅ Essential upgrade for high-stress racing conditions 📦 Includes: (1) Left HD Ball Differential Outdrive (1) Right HD Ball Differential Outdrive ✅ Compatibility: RC10B7 🏁 Strengthen your drivetrain and stay in the race longer with this premium Factory Team upgrade.

Read more less

Team Associated RC10B74.2 FT Center Dogbone Outdrives – Aluminum – ASC92359 Engineered for Lightweight Speed and Precision. These Factory Team Aluminum Center Dogbone Outdrives are a direct upgrade for the RC10B74 series, designed to be used with the FT Lightweight Driveline Center Kit (#92372). Precision CNC-machined for reduced rotating mass and maximum drivetrain efficiency. 🔧 Features: ✅ Lightweight aluminum construction ✅ CNC-machined for accuracy and durability ✅ Designed for high-performance racing applications ✅ Works with #92372 Lightweight Driveline Kit 📦 Includes: (2) Aluminum Center Dogbone Outdrives ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D Designed for use with ASC92372 FT Lightweight Driveline Ki 🏁 Perfect for racers seeking reduced driveline weight and increased efficiency on the track!

Read more less

Team Associated RC10B74.2 Factory Team Aluminum Center Differential Outdrives (2) – ASC92358 Lightweight Strength for Serious Performance. Upgrade your driveline with these Factory Team Aluminum Center Differential Outdrives, designed specifically for the B74.2 Lightweight Center Driveline Kit (ASC92372). Machined from high-quality aluminum, these outdrives reduce rotational mass while maintaining the strength needed for competitive racing. 🔧 Features: ✅ CNC-machined aluminum construction ✅ Lightweight for improved acceleration ✅ High-strength upgrade over stock components ✅ Precision fit for the B74.2 driveline 📦 Includes: (2) Aluminum Center Differential Outdrives ✅ Compatibility: RC10B74.2 RC10B74.2D Compatible with B74.2 Lightweight Center Driveline Kit (ASC92372) 🏁 Shed weight and gain efficiency—perfect for racers looking to optimize their drivetrain!

Read more less

Team Associated 3.5x44.5mm TiN Rear Shock Shafts (2) Durability Meets Smooth Performance. These 3.5x44.5mm Titanium Nitride-coated rear shock shafts are precision replacements designed for the Team Associated RC8T4 and RC8T4e vehicles. Built to withstand the rigors of 1/8-scale racing, they deliver smooth shock movement and enhanced durability. 🔧 Features: ✅ Titanium Nitride (TiN) Coated for reduced friction and extended wear life ✅ High-Precision Fitment ensures optimal shock performance ✅ 3.5mm Diameter, 44.5mm Length — rear shock compatibility ✅ Built for RC8T4 & RC8T4e Team Associated vehicles 📦 Includes: (2) 3.5x44.5mm TiN Rear Shock Shafts 🏁 Reinforce your rear suspension with Factory Team reliability and proven performance!

Read more less

Team Associated Factory Team Rear Gearbox Pinion Height Inserts – RC10B74.2 Precision Tuning for Peak Gear Mesh Upgrade your drivetrain precision with the Factory Team Machined Rear Gearbox Pinion Height Inserts for the RC10B74.2 and B74.2D. These CNC-machined aluminum inserts allow fine-tuning of your pinion height, ensuring ideal mesh alignment when adjusting differential height settings. 🔩 Features: 🧰 Precision-machined aluminum construction 🎯 Adjustable pinion height ensures proper gear mesh 🔁 Ideal for setups that involve diff height tuning 🔧 Quick and easy installation 📦 Includes: (1) 0–3mm Pinion Height Insert (1) 1–2mm Pinion Height Insert ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🛠️ Factory-level adjustment for competitive edge.

Read more less

Losi Baja Rey 2.0 Molded Roll Cage Sides Set Genuine Replacement for F100 & F150 Raptor Desert Trucks Maintain the structural integrity and scale realism of your Baja Rey 2.0 with this Molded Roll Cage Sides Set. Designed as a direct replacement for damaged or worn components, this factory-original part keeps your desert truck looking and performing at its best. 🧰 Features: 🔧 OEM Replacement – Designed specifically for the Losi Baja Rey 2.0 F100 and F150 platforms 🧱 Durable Molded Construction – Built to handle tough terrain and impacts 🛠️ Direct Fit – No modifications required 📦 Includes: (1) Molded Roll Cage Sides Set Keep your Baja Rey protected and trail-ready with this essential replacement part!

Read more less

Arrma Aluminum Gearbox Set – ARA311186 Boost Durability & Performance with a Precision Alloy Upgrade Upgrade your Arrma vehicle with the ARA311186 Aluminum Gearbox Set, engineered for enhanced strength and long-lasting reliability. Designed as a direct replacement for stock components, this aluminum gearbox is ideal for high-performance builds and bashers pushing their rigs to the limit. 🛠️ Features: 💪 CNC-Machined Aluminum – Increases structural strength and durability ⚙️ Precision Fit – Ensures optimal gear mesh and drivetrain alignment 🔧 Direct Replacement – Compatible with select Arrma vehicles without modification 🔒 Enhanced Heat Dissipation – Helps keep temperatures down during intense runs ✅ Compatibility: Arrma Kraton 6S BLXArrma Kraton 6S EXBArrma Notorious 6S BLX *Check your vehicle’s manual or Arrma parts listings to ensure fitment for your specific model. 🏁 Perfect for hardcore bashers or racers looking to reduce flex, increase drivetrain efficiency, and extend gearbox life!

Read more less

Losi Front Skid Plate & Support Brace (LOS251106)Essential Protection for Your Super Baja Rey 2.0 The Losi Front Skid Plate and Support Brace (LOS251106) is a genuine replacement part designed specifically for the Super Baja Rey 2.0 Desert Truck. This component provides robust protection for the front end of your vehicle, safeguarding it against impacts and rough terrain. Its durable construction ensures longevity and reliability, making it an essential upgrade for maintaining your truck's performance. Features: Genuine Losi replacement part Designed for the Super Baja Rey 2.0 Desert Truck Provides enhanced front-end protection Durable construction for long-lasting use Compatibility: Losi Super Baja Rey 2.0 Desert Truck Includes: (1) Front Skid Plate (1) Support Brace Product Specifications: Part Number: LOS251106 Material: High-quality composite Color: Black Note: This product is a replacement part and does not include additional hardware.

Read more less

Concepts F2 Clear Body w/ Wing – Losi Micro-B🏁 Aggressive Style, Proven Performance The JConcepts F2 Body for the Losi Micro-B brings race-proven aerodynamics and championship-winning style to the world of 1/28-scale racing. Borrowing key elements from the successful Finnisher line, this sleek and aggressive body is engineered to perform on tight indoor tracks packed with jumps, sweepers, and high-speed corners. With a forward cab bias, sharp windshield angle, and low-profile side-pods, the F2 delivers both improved rotation and enhanced mid-air stability. The simplified design reduces turbulence and unwanted drag, making it a standout on both carpet and turf. A micro-sized carpet/turf/dirt rear wing is included to round out the package with adjustable downforce for any track layout. 🔧 Note: Designed to attach using hook and loop tape (not included), just like the stock body. ✨ Key Features: JConcepts F2 styling, optimized for the Losi Micro-B platform Forward cab placement for improved steering response Steep windshield angle for better jump handling and flight stability Sculpted side-pods with dual-step scoop treatment Rear cab step and louver detailing Includes micro-size carpet/turf/dirt wing Clear polycarbonate with overspray film Includes window masks and JConcepts decal sheet 📦 Includes: (1) Clear F2 Body for Losi Micro-B (1) Micro Carpet/Turf/Dirt Rear Wing (1) Window Mask Sheet (1) JConcepts Decal Sheet Compatibility: Losi Micro-B ⚠️ Body requires trimming and painting. Painted body shown for reference only.

Read more less

Traxxas Rear Stub Axle Carriers (2)Fits XRT & X-Maxx Upgrade or replace your rear stub axle carriers with this genuine Traxxas Rear Stub Axle Carrier Set. Originally designed as a replacement for the Traxxas XRT race truck, these carriers also double as a durability upgrade for the X-Maxx. Made to withstand high-impact conditions, they ensure proper alignment and smooth rear drivetrain performance. 📦 Includes: (1) Left Rear Stub Axle Carrier (1) Right Rear Stub Axle Carrier ✅ Compatibility: Traxxas XRT (Direct Replacement) Traxxas X-Maxx (Optional Upgrade) 🔩 Built tough for hard hits and rough terrain — get your rear suspension back on track with Traxxas quality!

Read more less

Traxxas X-Maxx/XRT Metal Transmission Output Gear (51T)(Requires TRA7785X Steel Input Gear) Upgrade your drivetrain with the Traxxas 51T Steel Transmission Output Gear for the X-Maxx and XRT! Built from durable metal, this high-strength gear is designed for heavy-duty performance and extreme torque applications. Ideal for high-powered 8S setups, it delivers superior durability and wear resistance over the stock gear. 🔧 Important: This gear must be used with the TRA7785X Steel Input Gear for proper operation. 📦 Includes: (1) 51T Steel Transmission Output Gear ✅ Compatibility: Traxxas X-Maxx Traxxas XRT 🛠️ Toughen up your transmission and stay in the game — even under the harshest conditions!

Read more less

Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier (Requires TRA7783X) Upgrade your drivetrain durability with the Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier. Precision-machined from aluminum, this housing offers increased strength and improved heat dissipation for high-performance 8S setups. It's designed specifically for models equipped with the Torque-Biasing Center Drive and reinforced front/rear differentials. 🔧 NOTE: Requires TRA7783X Spider Gear Shaft & Spacer Set for proper installation. ✅ Features: 🏗️ CNC-machined aluminum for enhanced durability and precision ⚙️ Ideal for high-stress, high-speed 8S bashing and racing 🧊 Improved heat dissipation over stock composite housings 🔩 Designed for use with front/rear diffs and Torque-Biasing Center Drive systems 📦 Includes: (1) Aluminum Differential Housing Carrier 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🏁 Stronger. Cooler. Race-Ready. Upgrade your differential housing to aluminum today.

Read more less

Traxxas X-Maxx/XRT Differential Housing Carrier This is a replacement Traxxas X-Maxx/XRT Differential Housing Carrier, complete with included gaskets and washers for a proper seal and smooth installation. Built tough to handle the intense power and punishment of 8S brushless systems, this part keeps your front or rear differential securely housed and operating at peak performance. ✅ Features: 🔩 OEM replacement for X-Maxx and XRT platforms 🧱 Reinforced composite housing for durability under extreme loads ⚙️ Includes gaskets and washers for proper sealing and fitment 🔧 Essential for differential maintenance or rebuilds 📦 Includes: (1) Differential Housing Carrier (1) Gasket Set (1) Washer Set 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🔧 Engineered to endure. Built to fit. Backed by Traxxas.

Read more less

Team Associated RC10B7 8mm Blue Aluminum Shock Bushings – Lightweight & Durable 🔩 Keep your suspension functioning smoothly with Team Associated RC10B7 8mm Blue Aluminum Shock Bushings. Designed as a direct replacement for the RC10B7 and RC10B7D buggies, these anodized aluminum bushings offer precise fitment and durable performance without the added weight of steel. 🔧 Key Features: ✅ Lightweight blue anodized aluminum construction✅ Maintains proper shock alignment for consistent handling✅ Simple, drop-in replacement for stock bushings✅ Designed specifically for RC10B7 platforms 📦 Includes: (2) 8mm Aluminum Shock Bushings (Blue) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Reliable suspension starts with the right components.Upgrade your RC10B7 with these precision aluminum shock bushings and keep your rig race-ready! 🏁  

Read more less

Team Associated Factory Team RC10B7 FT Steering Block Mount Set – Precision Handling Upgrade! 🔧 Enhance your RC10B7 or RC10B7D’s steering performance with the Team Associated Factory Team RC10B7 FT Steering Block Mount Set!Crafted from high-quality aluminum, these mounts are designed for use with the Factory Team Adjustable KPI Set (ASC92479), delivering superior durability and sharper steering response for competitive racing. ✨ Key Features: 🔩 CNC-Machined Aluminum Construction – Provides exceptional strength and durability 🏁 Designed for Adjustable KPI Tuning – Works perfectly with the Factory Team Adjustable KPI Set (ASC92479) 🔧 Precision Fit for Factory Team Performance – Improves steering accuracy and responsiveness 🛡️ Official Team Associated Factory Team Upgrade – Race-proven quality and reliability 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Compatible only with vehicles equipped with the Factory Team Adjustable KPI Set (ASC92479).🔹 Includes two aluminum steering block mounts. 🏁 Maximize your steering precision with the Factory Team RC10B7 FT Steering Block Mount Set! 🔥 Upgrade today and experience superior handling and durability from Team Associated! 🔥

Read more less

🛠️ Mugen Seiki MSB1 1/10 2WD Buggy Aluminum Servo Mount Upgrade Your Steering. Eliminate Flex. Drive with Precision. Boost your Mugen MSB1’s steering performance with the CNC-machined aluminum servo mount—an essential upgrade for serious racers. This precision-crafted mount replaces the stock composite piece, delivering increased rigidity, improved servo response, and enhanced consistency under load. 🔧 Servo Mount Overview: ✅ CNC-Machined Aluminum Construction – Lightweight and ultra-strong ✅ Reduces Flex vs. Stock Mount – Keeps your steering tight and direct ✅ Improves Steering Precision & Consistency – Especially in high-traction conditions ✅ Optional Factory Upgrade for race-level performance 📦 Includes: (1) Aluminum Servo Mount 🔄 Compatibility: ✅ Mugen Seiki MSB1 1/10 2WD Buggy 🛒 Add to Cart now and bring next-level steering response to your Mugen MSB1.    

Read more less

Traxxas T-Lock Cable (3XL - 298mm) Keep your rig's locking differentials performing at their best with this genuine Traxxas replacement T-Lock Cable. ✅ Genuine Traxxas Replacement Part✅ Designed for T-Lock Remote Locking Differentials✅ Extra-Long 298mm Cable – 3XL Length✅ Ensures Smooth, Reliable Differential Locking Specifications:• Part Number: TRA8839• Type: T-Lock Cable• Length: 3XL (298mm)• Manufacturer: Traxxas Compatibility:Ideal for models equipped with Traxxas T-Lock remote locking differentials.

Read more less

Wheel Overview:Step up your short course truck game with these eye-catching chrome and red Split-Spoke SCT Wheels from Traxxas. Designed for the rear of your 2WD Slash and a perfect fit all around on 4X4 platforms, these wheels combine performance with bold looks that stand out at the track or in the backyard. The split 5-spoke design with molded-in beadlock detail gives your ride a race-inspired edge. Built to fit any standard 2.2"/3.0" SCT tire setup, these wheels mount with a 12mm hex and share the same offset as stock Slash 2WD rears—making them a direct, no-fuss upgrade. Why You’ll Love Them:✅ Striking chrome finish with red beadlock detail✅ Split 5-spoke styling for that aggressive race look✅ Compatible with Traxxas & aftermarket 2.2"/3.0" SCT tires✅ 12mm hex hub – same offset as Slash 2WD rear✅ Bolt-on upgrade – no adapters needed What’s In the Box: (2) Dual Profile Split-Spoke Rear Wheels (Chrome/Red) Compatible Vehicles: Traxxas Slash 2WD (Rear) Traxxas Slash 4X4 (Front & Rear) Traxxas Slash 4X4 Ultimate Traxxas Nitro Slash Traxxas Telluride 4X4

Read more less

  The Spektrum DX6e 6 Channel Full Range DSMX Transmitter gives you the unbeatable response of DSMX technology, the simplicity of Spektrum AirWare programming software and many other features you can't find on other "budget" radios. Features at a Glance: Patent-pending gimbal design with spring configuration switch DSM2/DSMX Wireless trainer link Virtually unlimited model memory-transmitter stores up to 250 models and only populates the model list with models the user has configured Airplane, Helicopter, Sailplane and Multirotor programming Built-In Telemetry 7 airplane wing types and 6 tail types 2 swashplate types 4 sailplane wing types and 3 tail types Multirotor flight mode setup 7-point throttle curves for airplanes and helicopters 7-point pitch and tail curves for helicopters Cross-platform model sharing with other Spektrum transmitters 4 AA batteries included EN328 compatible  In Depth Features: Airplane, Helicopter, Sailplane and Multirotor Programming: The DX6e comes equipped with the programming you need to fly almost anything. And because it's based on the same Spektrum AirWare software used in most other Spektrum transmitters, you can share model setups with just about any Spektrum user you meet. AIRPLANE PROGRAMMING 7 Wing Types: Normal, Dual Aileron, Flaperon, 1 Aileron 1 Flap, 2 Aileron 1 flap, Elevon A, Elevon B 6 Tail Types: Normal, V-Tail A, V-tail B, Dual Elevator, Dual Rudder, Dual Rudder/Elevator Flap System with Elevator Compensation 3 Flight Modes Dual Rates and Expo 7-Point Throttle Curve 3 Preset Mixes: Rudder-to-Aileron/Elevon, Aileron-to-Rudder, Elevator-to-Rudder 4 Programmable Mixes – Normal or Curve HELICOPTER PROGRAMMING Gyro 7-Point Throttle Curve 7-Point Pitch Curve 7-Point Tail Curve 2 Swash Plate Types: Normal, 3-Servo 120˚ 3 Flight Modes + Throttle Hold Dual Rates and Expo Cyclic-to-Throttle and Swashplate Timing Mixes 4 Programmable Mixes – Normal or Curve SAILPLANE PROGRAMMING 4 Wing Types: Single Aileron, Dual Aileron, 2 Aileron 1 Flap, 2 Aileron 2 Flap 3 Tail Types: Normal, V-Tail A, V-Tail B Camber System Camber Preset 5 Flight Modes Dual Rates and Expo Dual Rates and Expo 4 Preset Mixes: Aileron-to-Rudder, Aileron-to-Flap, Elevator-to-Flap, Flap-to-Elevator 4 Programmable Mixes – Normal or Curve MULTIROTOR PROGRAMMING Multirotor Channel Inputs – ALT (Altitude), ROL (Roll), PIT (Pitch), YAW Multirotor Checklists and Warnings Simplified Multirotor Flight Mode Setup and Switch Assignment 250-Model Memory: The enormous capacity of the DX6e's on-board memory means you will rarely, if ever, need to juggle models between transmitter memory and your SD card. The model memory menu is easy to navigate too. Only memory slots with model settings saved to them will appear. You won't have to scroll through empty slots or move models around if one is deleted. Built-In Telemetry: The built-in telemetry feature can give you real-time information on things like battery voltage, signal quality, motor temperature and more.* You can also program alerts that let you know when specific telemetry values reach or exceed limits you define. * Requires telemetry sensors and a telemetry-enabled receiver. Patent-Pending Gimbal Design with Spring Configuration Switch: The DX6e's patent-pending gimbal design lets you change gimbal spring configurations simply by moving a slider switch on the back of the transmitter. No tools are required. Just select the spring configuration that matches the mode you are using and model type you are flying. That's it. There are four spring configurations to choose from: Normal Throttle for Modes 2 and 4 (Air, Heli and Sailplane Model Types) Spring-Centered Throttle for Modes 2 and 4 (Multirotor Model Type) Spring-Centered Throttle for Modes 1 and 3 (Multirotor Model Type) Normal Throttle for Modes 1 and 3 (Air, Heli and Sailplane Model Types) The slider switch is protected by a hinged cover that prevents you from accidentally changing spring configurations in flight. Wireless Trainer Link: The wireless trainer link gives instructors the option to wirelessly ''buddy box'' with another DSMX/DSM2® transmitter. Once bound to another transmitter, ModelMatch™ technology will allow the DX6e to re-link without having to go through the bind process again. Specifications: Band: 2.4GHz Channels: 6 Model Memory: 250 Modulation: DSMX Range: Full Telemetry: Compatible Transmitter (Tx) Battery Type: AA Type: 6-channel Aircraft Transmitter

Read more less

Losi DBXL-E 2.0 Dual Servo Steering Link Set (2) – Upgrade for Dual Servo Setup Enhance the steering performance of your Losi DBXL-E 2.0 with this Dual Servo Steering Link Set. Designed as an optional upgrade, this set is essential for running a dual servo steering setup, providing increased torque and precision control. Features: ✅ Required for Dual Servo Steering Conversion – Essential upgrade for added steering strength.✅ Factory-Assembled Linkage Rods – Pre-built for a hassle-free installation.✅ Includes Two Servo Horns – Designed for secure and reliable servo connection.✅ Direct Fit for Losi DBXL-E 2.0 – No modifications needed, ensuring easy installation. Includes: 📦 (2) Servo Horns📦 (2) Factory-Assembled Linkage Rods Compatibility: ✔ Losi DBXL-E 2.0 💥 Upgrade your DBXL-E 2.0 for superior steering power and control! Perfect for high-performance driving and extreme conditions. 🏎️💨

Read more less

Pro-Line 8x32 to 17mm 1/2" Offset Aluminum Hex Adapters – 2-Pack Upgrade to Aluminum for Maximum Strength & Performance! The Pro-Line 8x32 to 17mm 1/2" Offset Aluminum Hex Adapters are the perfect upgrade for your Pro-Line Raid 8x32 removable hex wheels. If you’re tired of stripping plastic hexes, these precision-machined aluminum adapters provide extreme durability to handle high-power setups. Designed for bashers and racers who demand ultimate strength and reliability, these hexes also add a sleek, clear anodized finish for an eye-catching look. Key Features: ✅ Super-Strong CNC-Machined Aluminum – Eliminates plastic hex stripping.✅ Clear Anodized Finish – Corrosion-resistant & stylish.✅ 1/2" Offset Design – Enhances stability and handling.✅ Fits All Pro-Line 8x32 Removable Hex Wheels – Easy direct fitment.✅ Made in the USA – Unmatched quality and craftsmanship.✅ Built for Extreme Power – Perfect for high-performance RC trucks. What's Included: ✔ (2) Aluminum 8x32 to 17mm ½" Offset Hex Adapters Compatible Tires & Wheels: 🔹 Fits Any Pro-Line 8x32 Removable Hex Wheels🔹 Badlands 3.8" Tires Mounted on Raid Black 8x32 Wheels🔹 Badlands MX38 3.8" Tires Mounted on Raid Black 8x32 Wheels🔹 Road Rage 3.8" Tires Mounted on Raid Black 8x32 Wheels🔹 Sling Shot 3.8" Tires Mounted on Raid Black 8x32 Wheels🔹 Street Fighter HP 3.8" BELTED Tires Mounted on Raid Black 8x32 Wheels🔹 Trencher HP 3.8" BELTED Tires Mounted on Raid Black 8x32 Wheels🔹 Trencher X 3.8" Tires Mounted on Raid Black 8x32 Wheels Vehicle Compatibility: 🔸 Pro-Line PRO-Fusion SC 4x4🔸 Pro-Line PRO-MT 4x4 📢 If you're running extreme power and want unmatched durability, the Pro-Line 8x32 to 17mm Aluminum Hex Adapters are a must-have upgrade!

Read more less

Reedy RT5012A Digital Hi-Torque 1/8 Competition Brushless Servo (High Voltage) 🔥 Ultimate Power & Precision for 1/8 Buggy & Truggy Racing! 🚗💨 The Reedy RT5012A HV Digital Competition Servo is built for serious racers looking for unmatched torque, precision, and durability in 1/8-scale buggies and truggies. Featuring a powerful brushless motor, ultra-precise metal gears, and a full aluminum case, this high-voltage servo delivers fade-free performance with optimized speed and response. 🏆 Whether you're competing in intense off-road races or bashing at high speeds, the RT5012A ensures reliable steering and throttle control, providing faster, more consistent lap times. ✨ Key Features: 🔥 High-Torque Brushless Motor – Provides maximum power & reliability 🛠️ CNC-Machined Full Aluminum Case – Reduces operating temperatures for fade-free performance 💦 Waterproof Construction – Ensures durability in all weather conditions ⚙️ Ultra-Precise Metal Gears – Designed for exceptional strength & longevity 🔩 Dual Ball Bearings – Enhances smooth operation & efficiency ⚡ High-Voltage Compatible (Up to 8.4V) – Supports LiPo-HV RX batteries for maximum performance 🏁 Optimized Speed & Response – Tuned for steering & throttle applications in 1/8 competition racing 📊 Specifications: Input Voltage: 4.8 - 8.6V Motor Type: Brushless Speed (sec/60°): 6.0V: 0.148 7.4V: 0.133 8.4V: 0.118 Torque (kg-cm/in-oz): 6.0V: 37.2 kg-cm / 517 oz-in 7.4V: 44.2 kg-cm / 614 oz-in 8.4V: 50.1 kg-cm / 696 oz-in Dimensions: 40 x 20 x 37.5mm Weight: 82g Spline: 25T ✅ Compatibility: ✔ Pro2 DK10SW✔ Pro2 LT10SW✔ Pro2 RT10SW✔ RC8B4 / RC8B4.1 / RC8B4.1e / RC8B4e✔ RC8T4 / RC8T4e✔ Rival MT8 🏁 Dominate the Track with Precision & Power! 🔥 Whether you're looking for lightning-fast response, extreme torque, or race-winning consistency, the Reedy RT5012A HV Digital Brushless Servo delivers pro-level performance for competitive RC racing. 💨 Upgrade today and experience next-level steering & throttle control! 🏆🏁

Read more less

Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo – 1/4 & 1/5 Scale Powerhouse! 🔥 The Ultimate High-Voltage Brushless Combo for Large-Scale RCs! 🚗💨 Take your 1/4 and 1/5 scale RC vehicles to the next level with the Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo! Designed for heavy-duty off-road trucks, truggies, and monster vehicles, this high-voltage system delivers incredible torque, extreme power, and cutting-edge protection features to handle even the most demanding terrains. 🏆 Whether you're tearing through sand, snow, mud, or rocky terrain, this sensorless brushless system provides smooth acceleration, consistent power delivery, and extreme durability for the world’s largest RC vehicles! ✨ Key Features: ⚡ Extreme 300A Continuous / 2000A Peak Current – Unleashes massive power for large-scale vehicles 🔋 6-12S LiPo Compatibility – Supports high-voltage setups for extreme performance 🔥 70125 560KV Four-Pole Brushless Motor – Delivers incredible torque and top speed 🛠️ Waterproof & Dustproof Design – Handles mud, snow, and extreme weather conditions 💨 Built-in Fireproof Circuitry – Prevents electrical damage and enhances safety 📊 Real-Time Data Logging – Monitor performance using the HW LINK app (OTA Bluetooth module required) 🔩 Ultra-Powerful Switch Mode BEC (10A Continuous, 25A Burst) – Adjustable 6V/7.4V/8.4V output 🚀 Advanced Protection Features – Includes low-voltage cutoff, thermal safeguards, signal loss, and current protection 📦 What’s in the Box? (1) Hobbywing EZRUN MAX4 ESC (1) Hobbywing EZRUN 70125 560KV Brushless Motor (1) Double-Sided Tape (2) Heat Shrink Tubes (1) User Manual 📖 (1) Hobbywing Decal Sheet 📊 Motor Specifications – Hobbywing EZRUN 70125 560KV Part Number: 30402850 Poles: 4 KV Rating: 560KV No-Load Current: 3.6A Resistance: 0.0050Ω Motor Dimensions: 70mm (2.76") x 125mm (4.92") Shaft Diameter & Length: 8mm (0.315") x 30mm (1.181") Weight: 1995g LiPo Compatibility: 8-12S LiPo Recommended ESC: Hobbywing MAX4 HV ⚡ ESC Specifications – Hobbywing EZRUN MAX4 Scale Compatibility: 1/4 & 1/5 Heavy-Duty Off-Road, Truck, Monster Continuous/Peak Current: 300A / 2000A Motor Compatibility: Sensored & Sensorless Brushless Motors Input Voltage: 6-12S LiPo Motor Limit (12S LiPo): ≤600KV (70125 Size Motor) BEC Output: Adjustable 6V / 7.4V / 8.4V, 10A Continuous, 25A Burst Waterproof: Yes Switch Type: Electronic Capacitor Protection: Yes Size (L x W x H): 125mm x 85mm x 61.7mm Weight: 775.4g 📌 Tech Note: Supports LED Program Card, LCD Program Box, and OTA Programmer (optional) for ESC parameter tuning. 🏁 Conquer Any Terrain with Unmatched Power! 🔥 Built for the biggest and most powerful RC vehicles, the Hobbywing EZRUN MAX4 ESC & 70125 560KV Motor Combo delivers unrivaled durability, extreme torque, and high-speed performance for off-road monsters, truggies, and heavy-duty RC trucks. 💨 Upgrade now and experience the world’s most powerful RC system! 🏆🏁

Read more less

1RC Racing 1/18 Asphalt Late Model Body Set (Clear) 🚗 High-Quality Replacement Body for the 1RC Asphalt Late Model! Upgrade or customize your 1/18 Asphalt Late Model with this official 1RC Racing Body Assembly Set. Designed as a direct replacement, this clear unpainted body allows you to create a unique look with your own paint and decal choices. 🏆 Precision-molded for a perfect fit, this body set maintains the aerodynamic design of the original Asphalt Late Model while giving racers the freedom to customize their ride. 📦 What’s in the Box? (1) 1/18 Asphalt Late Model Body Assembly Set (1) Driver and Helmet 📌 Note: The body arrives clear and unpainted. ✅ Compatibility: ✔️ 1RC Racing 1/18 Asphalt Late Model 🔥 Customize your ride with the 1RC Racing Asphalt Late Model Body Set—built for style, performance, and precision fit! 🏁🎨  

Read more less

ARRMA EXB V2 Shock Standoff (M4 - 4pcs) – Heavy-Duty Suspension Upgrade! 🔥 Extreme Bash-Ready Shock Standoffs for ARRMA 6S Vehicles! 🚗💨 The ARRMA EXB V2 Shock Standoffs (M4) are designed to provide maximum durability and resistance to bending stresses in high-impact bashing and racing conditions. Precision-machined from high-quality steel, these shock standoffs ensure secure and reliable mounting for your shocks, keeping your suspension strong and stable during intense jumps, landings, and high-speed action. 🏆 Whether you're upgrading for added strength or replacing worn-out hardware, these EXtreme Bash shock standoffs are a must-have for ARRMA 1/8-scale 6S vehicles. ✨ Key Features: 🛠️ Precision-Machined Steel Construction – Designed for maximum durability & strength 🔥 Heavy-Duty Shock Mounting Solution – Resists bending under extreme stress 🔩 Accurately Cut M4 Threads – Ensures secure and precise installation ⚙️ Includes Flanged M4 Lock Nuts & Washers – For added security & reliability 🚀 Direct Replacement & Upgrade – Perfect for high-impact bashing and racing 📦 What’s in the Box? (4) EXB Shock Standoffs (M4) (4) Flanged M4 Lock Nuts (4) M4 Washers 📌 Note: These are direct replacements for EXB models and heavy-duty upgrades for standard Arrma 6S vehicles. ✅ Compatibility: ✔ ARRMA 1/8 KRATON 6S 4X4 RTR Brushless Speed Truck (ARA8608V6)✔ ARRMA 1/8 KRATON 6S EXB 4X4 RTR Brushless Speed Truck (ARA8708V6)✔ ARRMA 1/8 KRATON 6S EXB AVC 4X4 RTR Brushless Speed Truck, Black (ARA8708T1)✔ ARRMA 1/8 NOTORIOUS 6S 4X4 RTR Brushless Stunt Truck (ARA8611V6) 🏁 Built for Extreme Bashing & Performance! 🔥 Whether you're sending huge jumps, tackling rough terrain, or racing at high speeds, the ARRMA EXB V2 Shock Standoffs provide the strength, precision, and reliability you need to keep your suspension dialed in. 💨 Upgrade today and take your ARRMA 6S to the next level! 🏆🏁

Read more less

Arrma Big Rock/Kraton 6S Differential Set (Front/Rear) – Heavy-Duty Pre-Assembled Upgrade! 🔥 High-Performance Pre-Assembled Differential for Extreme Bashing! 🚗💨 Keep your Arrma Big Rock 6S BLX or Kraton 6S BLX running strong with this factory-assembled, pre-filled Front/Rear Differential Set. Engineered with heavy-duty steel gears, a spiral-cut 43T GP4 main gear, and 80k cSt silicone oil, this durable and high-efficiency differential ensures smooth power transfer, reliable performance, and extreme durability under heavy loads. 🏆 Whether you're replacing a worn-out differential or upgrading your drivetrain, this ready-to-install differential set delivers strong, consistent performance for high-power 6S brushless action! ✨ Key Features: 🛠️ Pre-Assembled & Pre-Filled with 80k cSt Silicone Oil – Provides fast, easy installation & maintenance 🔥 Heavy-Duty Steel Internal Gears – Designed for long-lasting durability in extreme conditions ⚙️ 43T GP4 Spiral-Cut Steel Main Gear – Enhances strength & efficiency under extreme loads 🔩 Metal Cross Shafts – Improves internal efficiency & power distribution 🏎️ Traditional Open Differential Design – Delivers smooth handling & consistent power transfer 🛡️ Composite Diff Case with Steel Insert – Ensures maximum durability & strength 🚀 Includes Rubber Shielded Bearings & Differential Shims – For a quick and precise fit 📦 What’s in the Box? (1) Factory Assembled Big Rock/Kraton 6S Differential Set (Front/Rear) (4) Differential Shims 📌 Note: This differential is designed for both Front & Rear placement on compatible Arrma 6S BLX models. ✅ Compatibility: ✔ Arrma Big Rock 6S BLX✔ Arrma Kraton 6S BLX 🏁 Keep Your Drivetrain Running Smooth & Strong! 🔥 Whether you're racing, bashing, or upgrading your drivetrain, the Arrma Big Rock/Kraton 6S Differential Set delivers rugged durability, smooth power transfer, and long-lasting performance. 💨 Upgrade or replace today for peak performance! 🏆🏁

Read more less

Arrma Kraton EXB Rear Lower Suspension Arms are a replacement for the Kraton 6S EXB model, but can be used with the 6S BLX Kraton, Outcast, Talion and Notorious models as an optional upgrade*. These Heavy-Duty Rear Lower Suspension Arms have been designed ARRMA tough so you can send it with confidence. *NOTE: These are compatible with the full range of Arrma 6S BLX models, but may require additional parts. If used as an optional upgrade, these arms must be used with ARA713032 - 3x33mm Shock Mount Pin. Features: Heavy-Duty design with material strategically placed to increase crash resilience  Constructed from tough composite material for increased crash resistance and long-lasting durability  Precision molded hinge pin holes for smooth slop-free suspension action  Sway Bar mounting holes for a wide selection of handling options  148mm between inner and outer hinge pin centers  Sold in pairs Includes: (1) Rear Suspension Arm - Left (1) Rear Suspension Arm - Right COMPATIBILITY: Arrma Big Rock 6S BLXArrma Fireteam 6S BLXArrma Kraton 6S BLXArrma Kraton 6S EXBArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLX

Read more less

Losi 8mm Bore Mod 1.5 Pinion Gear Upgrade your drivetrain with the Losi Mod 1.5 Pinion Gear, designed for 1/6 scale high-performance RC vehicles. With an 8mm bore, this precision-engineered pinion gear delivers smooth power transfer, durability, and reliable performance in extreme conditions. Features: ✅ Precision-Cut Mod 1.5 Teeth – Ensures smooth and efficient power delivery.✅ 8mm Bore Size – Designed for heavy-duty applications and high-torque setups.✅ Durable Construction – Built to withstand intense driving conditions.✅ Versatile Fit – Compatible with multiple Losi 1/6 scale vehicles. Includes: 📦 (1) Losi 8mm Bore Mod 1.5 Pinion Gear Compatibility: ✔ Losi Audi R8 LMS✔ Losi Super Baja Rey✔ Losi Super Baja Rey 2.0✔ Losi Super Rock Rey✔ Losi Super Rock Rey 2.0 🔧 Perfect for racers and bashers looking for a high-quality replacement or upgrade! 🏎️🔥

Read more less