⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Charge your LiPo batteries with confidence using the EcoPower Large Flame Resistant Charging Bag. Designed to help contain a fire in the event of a LiPo failure, this 23x30cm (9x11.8") safety bag is a must-have for RC enthusiasts who prioritize safety and compliance. Features: Fire-resistant material rated up to 30 watt-hours Industrial-grade Velcro seal for secure closure Reduces severity and helps contain LiPo fires Ideal for charging, storage, and transport Required by many tracks and clubs, including ROAR-sanctioned events Convenient charge lead access via side vents Instructions for Use: Set charger to correct rate and confirm polarity Connect leads and place battery at the bottom of the bag Route wires through vent and close the top flap securely Place bag on a non-flammable surface Charge your battery safely with added peace of mind Specifications: Dimensions: 230 x 300mm (9 x 11.8 in) Capacity: Up to 30 watt-hours Important Safety Notes:⚠️ Never leave a charging battery unattended⚠️ Always charge on a non-flammable surface⚠️ Not recommended for batteries over 30Wh Protect your workspace and your equipment — the EcoPower LiPo Safe Charging Bag is a simple, affordable way to add an essential layer of safety to your RC charging routine.

Read more less

🏁 Throw it back to the '90s with style! This officially licensed 1990 Chevy Lumina body delivers iconic NASCAR® looks for your Losi 1/12 racecar. Pre-cut and ready for your favorite paint scheme, it includes a custom rear spoiler and authentic decal sheet for maximum scale detail. 🛠️ Features: Official NASCAR® & Chevy® licensed Pre-cut for quick and easy install Includes custom rear spoiler & decal sheet Built-in overspray film for clean paint lines Made from durable crystal-clear polycarbonate Made in the USA by Pro-Line! 📦 Specs: Length: 15.75" (400mm) Width: 6.75" (171mm) Height: 3.7" (94mm) Scale: 1/12 Fits: All 2024–2025 Losi NASCAR® 1/12 models  

Read more less

1RC Racing 1/18 Brushless Motor (10000Kv) w/10T Pinion – 1RC7011Looking for more speed? The 1RC 10000Kv Brushless Motor is the perfect upgrade for your 1/18 scale racer. With serious RPM and a pre-installed 10T pinion, this motor delivers the punch you need to dominate on the track. ✔️ 10000Kv for high-performance speed✔️ Pre-pressed 10T pinion for easy install✔️ Compatible with 1RC 1/18 scale platforms✔️ Perfect upgrade for racers chasing top-end power Includes:• (1) Brushless Motor (10000Kv)• (1) 10T Pinion (installed) 💥 Turn up the heat and leave the rest behind!    

Read more less

1UP Racing Blue O-Ring Grease Lubricant (3g) – 1UP120301 Maximize performance and minimize friction with 1UP Racing Blue O-Ring Grease. This 3g container of high-performance lubricant is ideal for serious racers who demand smoother suspension and leak-free differentials. Designed to reduce sliding friction, it delivers ultra-smooth shock feel and long-lasting protection for diff o-rings and seals. Features: Smooths shock operation with reduced sliding friction Ideal for diff o-rings and seals to help prevent leaks Long-lasting formula for consistent performance Perfect for serious racers and RC enthusiasts Includes: (1) 3g Container of Blue O-Ring Grease  

Read more less

  Charge with confidence using the Boof RC XT60 to TRX-style charging lead — a reliable connection for your RC power needs. Whether you're juicing up packs on your bench or in the pits, this cable bridges modern XT60 chargers with the classic-style battery plug found on many RTR vehicles. ✅ XT60 female plugs directly into most smart chargers✅ Compatible with legacy "clip-style" battery connectors✅ 12 AWG silicone wire for safe, efficient current flow✅ Heat-shrunk terminals for clean, durable connections✅ Great for backyard bashers and race rigs alike 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: TRX-style Male 💡 Boof Tip: Always double-check polarity and connector fit before plugging in. This lead is built for performance — just like your rig.  

Read more less

Gens Ace G-Tech 6S 6800mAh 120C Smart LiPo Battery (22.2V) – EC5 Built to Bash. Engineered to Last. Unleash insane power with the Gens Ace G-Tech Smart 6S Bashing Series LiPo Battery – designed to deliver brutal punch, reliable runtime, and next-gen safety tech. With 120C continuous discharge, this pack is tailor-made for high-power 1/5 and 1/6 scale bashers that demand serious performance on every run. ⚙️ Features: ✅ 6S 22.2V / 6800mAh Capacity ⚡ 120C Continuous Discharge – built for bashing 🧠 Smart G-Tech Balance Plug with chip for auto-safety & battery data 🔋 Hardcase design adds protection in high-impact applications 🔌 EC5 Connector – ready for high-current setups 🔒 Low internal resistance for consistent voltage and cooler temps 📐 Specifications: Nominal Voltage: 22.2V (6S1P) Capacity: 6800mAh Max Charge Rate: 5C (34A) Continuous Discharge: 120C Watt Hours: 150.96Wh Connector: EC5 Balance Plug: G-Tech Smart Dimensions: 159.17 x 47.55 x 62.07mm Weight: 1079g (38.06oz) ROAR Approved: ❌ No 💥 Whether you're launching off ramps or hammering down dirt trails, the Gens Ace 6S Smart Bashing Battery delivers maximum power with minimal maintenance. Just plug in and bash hard.  

Read more less

Nitro Pro CT3 JTP RC 550 – Jared Tebo Signature Power 💪 Engineered in collaboration with pro driver Jared Tebo, the 3rd generation CT3 550 servo delivers elite-level performance and toughness for full-sized RC platforms. Whether you’re bashing, crawling, or racing, this servo is built to handle it all with zero compromise. 🧠 Featuring upgraded electronics, reinforced stainless gears, and an overhauled billet case, the CT3 JTP takes your control to the next level — delivering a massive 556 oz-in of torque at 0.085 sec. And yes, it’s IP67 waterproof, so weather won't stop the action. ✨ Key Features: ⚡ 556 oz-in Torque @ 7.4V – Insane power for serious 1/8 & monster builds⏱️ 0.085 Transit Speed – Lightning-fast response, built for pro-level control🛠️ Jared Tebo Signature Servo – Tuned and tested by a champion💧 IP67 Waterproof Rating – Drive confidently in all conditions🔩 Upgraded Stainless Gearset (316/304) – Tough, reliable, and precise🏗️ CNC Billet Aluminum Case – Strength and style with advanced cooling🔋 Brushless Motor – High-efficiency power and long-term performance✅ 12-Month Warranty + 100% Satisfaction Guarantee 📦 What’s in the Box? ✔️ (1) CT3 JTP RC 550 Servo✔️ Mounting Hardware✔️ Instruction Sheet 📊 Specifications: Torque: 556 oz-in Speed: 0.085 sec Motor Type: Brushless Waterproof Rating: IP67 Gears: 316/304 Stainless Steel Case Material: CNC Machined Aluminum Warranty: 12-Month No-Hassle 🧰 Built with Pros. Trusted by Racers. The CT3 JTP is the ultimate upgrade for those who demand next-level torque, speed, and durability — backed by Jared Tebo himself. 💡 Unlock Pro-Level Precision – Upgrade to Nitro Pro CT3 JTP Today!

Read more less

Arrma Typhon Grom Composite Chassis (200mm) Direct Replacement Chassis for 1/14 Typhon Grom This composite chassis is a genuine Arrma replacement part, designed to match the stock 200mm wheelbase configuration. Made from tough composite materials and reinforced in high-stress areas, it ensures long-lasting durability and a precise fit for your Typhon Grom buggy. Features: ✅ Durable Composite Material – Built to handle rough terrain and high-impact action.✅ Precision Manufactured – Ensures a secure and reliable fit.✅ Reinforced High-Stress Areas – Extra material added where it’s needed most.✅ Integrated Lower Gearbox Housing & Suspension Mounts – Maintains the structural integrity of your buggy. Includes: 📦 (1) Composite Chassis - 200mm Wheelbase Compatibility: ✔ 1/14 Typhon Grom 223S DSC 4X4 RTR Brushless Buggy (ARA2306 & ARA2306S)✔ 1/14 Typhon Grom 4X4 RTR Brushed Buggy (ARA2106) Restore your Typhon Grom to peak condition with this high-quality replacement chassis! 🏎️💨  

Read more less

Team Associated RC10B7 HD Gear Differential Outdrives (2) – Built Tough for Maximum Power Transfer! ⚙️ Maintain your RC10B7 or RC10B7D’s drivetrain strength with the Team Associated Factory Team HD Gear Differential Outdrives!These heavy-duty outdrives are designed to handle the intense loads of competitive racing, ensuring your buggy stays durable and consistent under extreme conditions. ✨ Key Features: ⚙️ Heavy-Duty Construction – Engineered to handle the rigors of intense 1/10 scale racing 🔧 Direct Replacement Design – Perfect fit for the Team Associated RC10B7 and B7D gear differentials 🏁 Improved Durability – Strengthens the drivetrain for better long-term performance 🛡️ Trusted Factory Team Quality – Race-proven reliability from Team Associated 📦 Includes: ✔ (2) Heavy-Duty Gear Differential Outdrives 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for stock RC10B7 and B7D differentials.🔹 Ideal for racers looking to enhance drivetrain longevity and consistency under high loads. 🏁 Drive harder and push your limits with the Factory Team HD Gear Differential Outdrives! 🔥 Upgrade today for maximum durability on race day with Team Associated! 🔥  

Read more less

🔥 Team Losi Racing 22X AC 1/10 2WD Electric Buggy Kit – Carpet & Astro Track Dominator! 🏁 Next-Generation TLR Performance on High-Grip SurfacesTake the lead with the TLR 22X AC, built from the ground up for the fastest, grippiest tracks in the game. This elite 2WD race kit delivers unmatched handling, advanced adjustability, and simplified maintenance — all optimized for astro and carpet racing. Welcome to the new standard in 1/10 electric off-road competition. ⚙️ Key Features: 🛠️ 2mm Hard-Anodized 7075-T6 Aluminum Chassis – Durable, lightweight, and flex-tuned for high-grip racing 🔄 Laydown Gearbox – Easy differential and idler access without removing the suspension 🚀 13mm Big-Bore Shocks – With G3 internals and matching 13mm springs for next-level damping 🔧 Adjustable Geometry – Caster adjustable from -5° to +5°, kick-up from 20° to 25° 📏 Multiple Steering & Differential Height Options – Fully customizable to match track conditions 🏎️ Industry Standard Wheel Offset – Compatible with most 2WD front wheels 💎 Carbon Fiber Shock Towers – Lightweight and rigid for precise handling 🧩 Refined Steering Geometry – Smooth, consistent steering feel 📦 In the Box: (1) TLR 22X AC 1/10 2WD Buggy Kit (Unassembled) (1) Pro-Line Sector 22X Clear Body (1) Pro-Line Air Force 7" Rear Wing (1) Pro-Line Front Wing (1) Instruction Manual 🔧 Needed to Complete: (1) 540 Size Brushless Motor (1) ESC (1) 2S LiPo Shorty Battery (1) LiPo Battery Charger (1) 2-Channel Radio & Receiver (1) Steering Servo (1) 48 Pitch Pinion Gear (1) 30x30mm Motor Fan (Optional) (4) 2.2” Buggy Wheels (2WD Fronts & Rears) (4) 2.2” Buggy Tires (2WD Fronts & Rears) Polycarbonate Paint 📐 Specifications: Scale: 1:10 Drive: 2WD Power Source: 2S LiPo Length: 14.8in (376mm) Wheelbase: 11.42in (290mm) Height: 5.79in (147mm) Assembly: Kit (Requires building and electronics) ⚠️ Note: This is a kit and requires assembly and additional electronics. Product photos are for illustration only. 💥 Dialed from the box. Tunable to the limit. Built to win. Get your TLR 22X AC and leave your competition in the dust!

Read more less

1up Racing Shock & Diff Oil Carrier Bag – Trackside Tuning, Organized 🎯 Keep your oils organized and protected with the 1up Racing Shock & Diff Oil Carrier Bag — the perfect solution for racers who bring the whole tuning bench to the track. Designed to fit 12 bottles of 1up Racing Pure Silicone Oils, this carrier keeps your setup clean, efficient, and ready for any condition. 💼 Featuring rigid, oil-resistant internal dividers and a durable zip-up enclosure, this bag is built to take spills, bumps, and race day chaos in stride. A woven carry handle and bold 1up Racing logo complete the look, making this the go-to organizer for serious racers. ✨ Key Features: 🧴 12 Dedicated Bottle Slots – Fits 41x41x105mm bottles like a glove🧽 Rigid Oil-Resistant Dividers – Won’t break down or absorb spills🧵 Zipper Enclosure – Securely seals your oils for transport🪢 Woven Carry Handle – Easy grab-and-go for race day🔥 Signature 1up Racing Look – Clean and professional trackside presence 📏 Dimensions: Individual Slots: 41mm x 41mm x 105mm\ Overall Bag Size: 22 x 17 x 12cm 🧰 Stay Dialed In – Wherever You Race From shock tuning to diff balancing, this carrier keeps your essential fluids safe, sorted, and spill-proof. No more mess. No more guesswork. 💡 Stay Race-Ready – Grab the 1up Oil Carrier Bag Today!

Read more less

Traxxas 3000mAh 7.4V 2-Cell LiPo Battery w/ iD® Connector (Part #2827X) 🔋Compact 2S Power for Lightweight Performance The Traxxas 3000mAh 2S LiPo battery is a lightweight, reliable power source ideal for vehicles where space and weight matter. Equipped with the Traxxas iD® connector, this pack simplifies charging by automatically configuring settings when used with a Traxxas iD-compatible charger. Great for hobbyists looking for consistent performance in a compact form. ⚡ Features: 🔋 3000mAh Capacity – Balanced for light-duty bashing or casual driving 🔌 7.4V 2-Cell (2S) Configuration – Delivers smooth, consistent 2S performance 🔗 Traxxas iD® Connector – Auto-detects cell count and chemistry for worry-free charging 🧊 Hard Case Shell – Protects the battery during use and transport 📏 Slightly Smaller Footprint – Ideal for tighter battery compartments 📦 Specifications: Voltage: 7.4V Cell Count: 2S (2-cell LiPo) Capacity: 3000mAh Connector Type: Traxxas High-Current iD® Perfect for casual running, lightweight vehicles, or smaller 1/10 models.Use only with Traxxas iD®-compatible chargers to ensure safe, optimized charging. 🔌✅

Read more less

Small Scale Powerhouse for Full-Throttle Bashing Fun The Arrma® Gorgon Grom 4x4 1/16 RTR Brushed Monster Truck brings unstoppable monster truck performance to a compact, ready-to-run size. Designed for both new drivers and seasoned bashers, this small-scale powerhouse combines durability, agility, and convenience — just charge, power on, and unleash the fun! 🔋 About the Gorgon Grom Advanced Electronics Equipped with Spektrum™ SLT2 2.4GHz Radio System for precise, interference-free control Spektrum SLT 25A Brushed ESC/Receiver Combo manages smooth power delivery from the 380-size brushed motor Spektrum SX110 metal-gear servo provides accurate, dependable steering response Water-resistant electronics for worry-free all-weather driving Beginner-friendly controls with adjustable throttle limits for learning at your own pace Suspension & Drivetrain Fully enclosed metal-gear 4WD drivetrain for efficient power transfer and reliability Independent suspension with oil-filled coil-over shocks for smooth handling on any surface Reinforced composite chassis designed to handle big jumps and rough landings Adjustable ride height for optimal performance across varied terrain Impact-absorbing front and rear bumpers keep the truck protected during extreme action Body & Tires Sleek monster truck body with clipless mounting system — no body clips to lose! High-traction dBoots Chevron MT tires provide maximum grip on dirt, gravel, or pavement Color-matched wheels and shock springs for aggressive looks and easy visibility Dual-catch battery tray ensures secure fit and quick battery swaps Compact design allows for tight cornering and responsive control in smaller spaces 🧩 Key Features ✅ 4WD drivetrain for all-terrain domination✅ Durable composite chassis with adjustable ride height✅ Clipless body system for quick battery access✅ Independent suspension with oil-filled shocks✅ Spektrum SLT2 radio with beginner settings✅ Smart G2 LiPo battery & USB-C charger included✅ Available in Yellow, Red, or Bronze color schemes 📦 In the Box (1) Gorgon Grom 4x4 1/16 RTR Monster Truck (1) Spektrum SLT2 2.4GHz Transmitter (1) Spektrum SLT 25A ESC/Receiver Combo (IC2) (1) 380-Size Brushed Motor (1) Spektrum SX110 Metal-Gear Servo (1) Spektrum Smart 2S 7.4V 1400mAh 30C LiPo Battery (1) Spektrum S10 Smart G2 Mini 2S USB-C Charger (4) AA Batteries for Transmitter (1) Hex Wrench & Product Manual 🔋 Needed to Complete (1) USB-C Power Adapter 📐 Specifications Spec Value Scale 1:16 Drive 4WD Power Source 2S LiPo (7.4V) Length 10.83" (275mm) Width 8.46" (215mm) Height 5.43" (138mm) Wheelbase 6.85" (174mm) Weight 36.32oz (1029.66g) Motor 380 Brushed ESC Spektrum SLT 25A Connector IC2 Servo Spektrum SX110 Metal Gear Tires dBoots Chevron MT Hex Size 12mm Assembly Level Ready-to-Run (RTR) 💥 Compact Size. Big Attitude. The Arrma Gorgon Grom 4x4 RTR proves that small-scale doesn’t mean small fun. With full 4WD traction, durable design, and punchy power, this mighty mini monster truck is ready for backyard jumps, parking lot races, and all-out bashing — anytime, anywhere.    

Read more less

Maximize efficiency and longevity with the Team Associated RC10B7 Factory Team Bearing Set. Featuring high-quality sealed bearings, this upgrade reduces friction, improves drivetrain smoothness, and delivers long-lasting, trouble-free performance for competitive racing. Features: Premium sealed bearings for protection against dirt and debris Low-friction design for smoother, more efficient operation Factory Team quality for professional-level performance and durability Direct fit for the RC10B7 buggy Includes: (1) Complete Factory Team Bearing Set for RC10B7 A must-have upgrade for racers who want maximum drivetrain efficiency and reliability.

Read more less

Team Associated RC10B6 Factory Team Titanium Hex Adapter Front Axles – Lightweight Strength for Precision Tuning! 🛠️💨 Upgrade your front end with the Team Associated Factory Team Titanium Hex Adapter Front Axles – a high-performance option designed to reduce weight and improve durability. These titanium axles are not only ultra-strong and lightweight but also feature cross pins for width tuning via 12mm clamping hex adapters. Whether you're fine-tuning your setup for different track widths or just looking for a reliable upgrade, these axles deliver race-proven strength and flexibility. ⚙️ Key Features: ✅ Precision-Cut Titanium Alloy – Lightweight and durable✅ Cross Pin Design – Allows tuning of front-end width with 12mm hex adapters✅ Factory Team Quality – Trusted upgrade for competitive racing✅ Direct Fit for B6/B7 Series Platforms 📦 Includes: (2) Titanium Front Axles (2) Cross Pins (2) Mounting Bolts ✅ Compatibility: Team Associated RC10 B7 Original Team Associated RC10 B7D Team Associated RC10B6 Original Team Associated RC10B6.1 / Factory Lite / B6.1D Team Associated RC10B6.2 / B6.2D Team Associated RC10B6.3 / B6.3D Team Associated RC10B6.4 / B6.4D Team Associated RC10B6D 🏁 Lighter, stronger, and built for precision — dominate your next race with titanium performance from Factory Team! 🧨🔧

Read more less

4 piece set Hex  1.5mm 2.0mm 2.5mm 3.0mm     

Read more less

1up Racing UltraLite 30mm High-Speed Aluminum Fan w/ Guard – The Coolest Way to Stay Cool! Keep your electronics running at peak performance with the 1up Racing UltraLite 30mm High-Speed Aluminum Fan, featuring an integrated guard for maximum protection, ultra-lightweight design, and high-speed cooling. Engineered for both hardcore racers and weekend enthusiasts, this 10g fan provides exceptional airflow while keeping weight to a minimum. Key Features: ✅ Ultra-Lightweight Design (Only 10g!) – Reduces weight without sacrificing cooling performance.✅ Integrated Aluminum Guard – Protects fan blades from debris and allows for shorter mounting screws, saving even more weight.✅ High-Speed Dual Ball Bearings – Ensures smooth, long-lasting performance.✅ Powerful Airflow – Spins at 29,000 RPM @ 8.4V for maximum cooling efficiency.✅ Short 30mm Cable with 2-Pin Connector – Works with many ESCs for easy plug-and-play installation.✅ Includes 200mm JR Extension Cable – Allows you to connect to a receiver or hard-wire the fan.✅ Versatile Mounting Options – Includes 4x M2.5x6mm screws & 4x M3x6mm screws for secure installation. Precision Cooling for Serious Racers! 🏁 Designed for High-Performance RC Vehicles: Mounts easily with standard 30mm fan spacing (24mm holes). Compatible with 6.0V – 8.4V input voltage. Pair with the 1up Racing Brass Chassis Mount for a low center of gravity and secure chassis mounting. 🔥 Keep your electronics cool and your performance hot with the 1up Racing UltraLite 30mm Fan! Specifications: Input Voltage: 6.0V – 8.4V Outer Dimensions: 12 x 30 x 30mm Mounting Hole Spacing: 24mm (Standard for 30mm Fans) Weight: 10.0g Connector: Basic 2-Pin with 200mm JR Extension Bearings: Dual Ball Bearings Fan Blades: 5 Max RPM: 29,000 @ 8.4V In the Box: (1) 1up Racing UltraLite 30mm High-Speed Aluminum Fan w/ Guard (1) 200mm JR Extension Cable (4) M2.5x6mm Screws (4) M3x6mm Screws Stay Cool & Race Faster! Designed for performance-driven racers, the 1up Racing UltraLite 30mm High-Speed Aluminum Fan offers industry-leading cooling power, ultra-lightweight design, and unmatched durability. 🔥 Upgrade today and keep your RC electronics running cooler than ever! 🏁💨

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

Traxxas 2300mAh 11.1V 3-Cell LiPo Battery w/ iD® Connector (Part #2824X) 🔋Reliable Power for High-Performance RC Systems This 3S 11.1V 2300mAh LiPo battery delivers solid performance and long-lasting power in a compact footprint. Perfect for vehicles that require a lightweight, high-output pack, this Traxxas battery is equipped with an iD® connector for seamless charging and foolproof setup with Traxxas iD-compatible chargers. ⚡ Features: 🔋 2300mAh Capacity – Balanced power-to-weight ratio for 3S vehicles 🔌 11.1V 3-Cell Configuration – Ideal for compact models needing high voltage 🔗 Traxxas iD® Connector – Ensures safe, automatic charger settings 🧊 Hard Case Design – Durable protection for everyday use 📏 Compact Dimensions – Great for tight battery compartments 📦 Specifications: Voltage: 11.1V Cell Count: 3S (3-cell LiPo) Capacity: 2300mAh Connector Type: Traxxas High-Current iD® Compatible with select Traxxas 1/10 and 1/16 scale vehicles.Always use a Traxxas iD®-compatible charger for optimal performance and safety. 🔌✅

Read more less

Expand your RC electronics setup with the EcoPower Heavy Duty Universal Servo Y Extension Lead. Designed for reliable signal splitting and dependable power delivery, this heavy-duty harness allows you to run two servos from a single receiver channel while maintaining consistent performance in demanding applications. Featuring thick 22AWG wiring and universal connector compatibility, the ECP-1542 is an excellent choice for crawlers, boats, airplanes, dual-servo steering setups, and custom RC builds. ⚡ Features: 🔌 Splits one receiver channel into two servo outputs💪 Heavy-duty 22AWG wire construction for increased current capacity📏 Convenient 15cm (6-inch) length⚙️ JR-style male connector for broad compatibility🔧 Dual female servo connectors🚀 Handles high-current applications with ease🛡️ Durable insulation for long-lasting reliability🌎 Compatible with most major servo brands and radio systems 📦 Includes: (1) EcoPower Heavy Duty 15cm Universal Servo Y Extension Lead(1 Male Connector / 2 Female Connectors) 📏 Specifications: Part Number: ECP-1542Length: 15cm (6in)Wire Gauge: 22AWGConnector Type: JR Style Male to Dual Female Servo Connectors 🔧 Compatibility: Compatible with: Futaba Servos JR Servos Airtronics Servos HiTec Servos Most standard RC receiver and servo systems Perfect for: Dual steering servo setups Dual elevator servos Scale accessories Winch systems Lighting controllers Custom RC projects 💡 Pro Tip: Servo Y-harnesses are commonly used in crawlers and monster trucks running dual steering servos. For high-torque servo applications, make sure your BEC or receiver power system is capable of supplying enough current for both servos operating simultaneously. 🔥🔌🏁

Read more less

Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.  

Read more less

Give your RC10B7 or B7D the competitive edge with the JConcepts S15—a high-performance body shell engineered specifically around the newest Team Associated chassis design. Developed from the winning DNA of the Silencer series, the S15 combines sharp steering response, increased stability, and efficient airflow management to elevate your buggy’s performance on carpet, turf, or dirt. Available in Standard or Lightweight versions to tailor your build to track conditions and driving style. S15 Body Overview The S15 features JConcepts’ signature forward-biased cab and dual-channel rear airflow, paired with mid-body winglets and a refined rear stabilizer kick-up to enhance cornering grip and straight-line stability. The integrated cockpit “shark fin” adds rigidity and helps keep the buggy tracking correctly at high speeds. Raised rear side-pods provide additional clearance for taller shorty LiPos and the B7/B7D saddle pack configuration—ensuring compatibility with the platform’s multiple battery layout options. Key Features Designed specifically for the Team Associated RC10B7 & B7D platforms Modern S15 aerodynamic package Forward cab bias improves steering precision Mid-body winglets & stabilizer kick-up increase downforce Cockpit “shark fin” enhances tracking and roof rigidity Raised rear side-pods for various battery configurations Clear polycarbonate with protective overspray film Available in Standard or Lightweight materials Includes (1) JConcepts RC10B7/B7D S15 Clear Buggy Body (1) Decal Sheet (1) Window Mask Sheet Note Body ships clear and unpainted Painted photos shown for illustration purposes only  

Read more less

Upgrade the durability and precision of your Arrma Mojave Grom with the Hot Racing Aluminum Rear Lower Arm Set. Machined from high-strength aluminum and anodized black, these arms offer increased rigidity and improved suspension performance over stock plastic components. Perfect for hard bashers and racers who want a tighter, more consistent feel under high loads. 🟢 Features CNC-machined aluminum construction Durable anodized black finish Increased strength and stiffness compared to stock arms Helps improve handling precision and durability Premium fit and finish 📦 Includes (2) Aluminum Rear Lower Suspension Arms 🔧 Compatibility Arrma Mojave Grom 🏁 Built for Bashers Take control of your suspension and eliminate weak links with this high-quality upgrade from Hot Racing.  

Read more less

Upgrade your steering precision and durability with the Losi NASCAR Aluminum Bell Crank Set. Machined from strong, lightweight aluminum, this precision-engineered set eliminates slop from the factory steering system while maintaining consistent steering angles and control — even under high-impact racing conditions. ✅ Precision Aluminum Construction – Adds strength and eliminates flex for more accurate steering✅ Direct Factory Upgrade – Installs easily using existing hardware✅ Improved Durability – Designed to absorb impacts and maintain alignment✅ Gunmetal Finish – Sleek, race-ready look Includes: (1) Aluminum Bell Crank Set (6) Sleeves ⚡ Take control of every turn — upgrade to the Losi Aluminum Bell Crank for smoother, more consistent steering performance.

Read more less

Fine-tune your gearing with the Team Associated 48 Pitch, 69 Tooth Spur Gear. This optional upgrade offers smooth, efficient power transfer and allows racers to dial in the perfect gear ratio for their setup. 🔥 Key Features: Precision-molded 48 pitch, 69 tooth spur gear Provides smooth, efficient drivetrain performance Optional tuning part for gearing adjustments Genuine Team Associated quality for durability and accuracy ✅ Compatibility: Team Associated Apex Team Associated TC5 Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (69T) ⚠️ Tip:Pair with the right pinion gear to optimize top speed vs. acceleration for your track conditions.  

Read more less

Overview:The JConcepts XRAY XB2 2025 “S2” 1/10 Buggy Body delivers pro-level performance and aerodynamic precision for the latest XB2 platform. Originally designed for world-champion competition, the S2 design has become a staple for racers running low-profile setups on dirt, carpet, or turf. Precision-molded from high-quality clear polycarbonate, the S2 body features an aggressive low-drag profile with refined airflow management and enhanced downforce for stable, responsive handling.Available in both Standard (0685) and Lightweight (0685L) versions to match your preferred balance of strength and agility. About the S2 Buggy Body Streamlined Style & PerformanceThe S2 body uses computer-aided design to achieve symmetry, precision, and consistent airflow. Its low-profile cab, recessed hood, and dual window design enhance cooling and responsiveness, while the integrated center fin improves high-speed stability. Sidepod scoops can be trimmed to tune downforce or airflow, and the body wraps snugly around the XRAY spur-gear guard for a perfect fit. Each kit includes two 6.5" wings, making it a versatile choice across all surface types. Features Aerodynamic low-profile shape reduces drag and boosts corner speed Dual-window cab and recessed hood for improved airflow and cooling Rear sidepod scoops for customizable downforce or airflow tuning Stabilizing center fin and reinforced side rails for durability Perfect fit around XRAY spur-gear guard Includes two 6.5” wings for multi-surface versatility Available in Standard and Lightweight options Includes (1) XRAY XB2 2025 “S2” 1/10 Buggy Body (choose Standard or Lightweight) (2) Wings (1) Decal Sheet (1) Window Masking Sheet Compatibility XRAY XB2 2025 Tech Note: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.

Read more less

Boof RC EC5 Female to TRX-Style Male Adapter⚡ Seamless Power Conversion — Boof Style. This Boof RC adapter connects an EC5-equipped battery to vehicles using a TRX-style plug (compatible with Traxxas-style connectors—without naming names). Made with quality materials and a compact design, it’s perfect for racers, bashers, and anyone needing a reliable connection without the hassle of soldering. ✅ EC5 Female to TRX-Style Male✅ 12AWG wire for solid current handling✅ Compact and clean 5cm length✅ Great for adapters, charging setups, or direct installs✅ No soldering required—plug and play! 📦 Includes:(1) EC5 Female to TRX-Style Male Adapter 💡 Boof Tip: Keep a few in your pit bag—you never know when a mismatched plug combo will show up.

Read more less

Team Associated RC10B7 Carbon Fiber Rear Shock Tower – Lightweight & Race-Ready 🏁 Upgrade your rear suspension with the Team Associated RC10B7 Carbon Fiber Rear Shock Tower, designed to deliver race-proven durability and reduced weight for optimal performance. This precision-cut carbon fiber tower is a direct replacement that maintains strength while lowering your buggy’s center of gravity. 🔧 Key Features: ✅ Lightweight carbon fiber construction for improved handling✅ High strength and stiffness for consistent shock response✅ Direct fit for easy installation✅ Optimized layout for tuning shock position and geometry 📦 Includes: (1) Carbon Fiber Rear Shock Tower ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Strength meets precision.Take your rear suspension setup to the next level with this carbon fiber shock tower upgrade. 🏆

Read more less

🔩 Arrma Granite Grom Front Suspension Arm Set "A" 🔩💥 Durable Replacement Suspension Arms for Granite & Typhon Grom 💥 Keep your Arrma Grom running strong with the Granite Grom Front Suspension Arm Set "A"! Whether you're hitting jumps, bashing through rough terrain, or just cruising, these tough suspension arms are designed to handle it all. Perfect for replacing worn or broken parts, this set ensures your RC stays race-ready and trail-tough. 💪🏆 Compatible with both the Granite Grom and Typhon Grom, installation is a breeze—so you can spend less time in the workshop and more time tearing it up! 🚗💨 ✅ Key Features: ✨ Direct replacement for stock components🛠️ Precision-molded for strength & durability🚙 Compatible with Arrma Granite Grom & Typhon Grom⚡ Easy installation for quick repairs💯 Includes both upper & lower front arms 📦 Includes: ✔️ (2) Front Upper Arms✔️ (2) Front Lower Arms 🔗 Compatibility: 🔸 Arrma Granite Grom🔸 Arrma Typhon Grom

Read more less

NEXX Racing Arrma Grom Reservoir Threaded Aluminum Oil-Filled Shocks (Black, Red, OR Blue) (4) (58mm) 🔥 High-Performance Adjustable Shocks for the Arrma Grom! 🚗💨 Upgrade your Arrma Grom with the NEXX Racing 58mm Aluminum Oil-Filled Threaded Reservoir Shocks! Engineered with precision CNC-machined aluminum, these shocks provide smoother dampening, extra tunability, and longer travel than stock shocks. The fully functional reservoir with a realistic divider piston allows you to adjust the rebound for customized suspension performance, making them a must-have upgrade for any Arrma Grom enthusiast. 🏆 Whether you're bashing, jumping, or racing, these oil-filled, threaded aluminum shocks offer unmatched durability, precision, and control over rough terrain. Available in Black, Red, or Blue anodized finishes, these shocks will not only enhance performance but also give your Grom a sleek, race-inspired look! ✨ Key Features: ✔️ Perfect Fit for Arrma Grom Platforms – Direct drop-in replacement upgrade 🛠️ CNC-Machined Aluminum Construction – Provides strength and durability 🔥 Fully Functional Reservoir with Divider Piston – Allows precise shock rebound tuning 💨 Super Smooth Dampening Action – Reduces bounce for better control 🔩 Completely Serviceable Design – Fine-tune your spring rate and dampening effect 🛞 Adjustable Spring Preload & Bleed Valve – Customize suspension for different terrains 🛠️ Inner O-Ring Design – Prevents leaks for long-lasting performance 🎨 Available in Multiple Colors – Choose from Black, Red, or Blue anodized finishes 🚀 Pre-Assembled & Includes Springs – Ready for installation out of the box 📦 What’s in the Box? (4) Pre-Assembled Aluminum Oil-Filled Shocks (w/ Black Soft Springs) (1) Hex Key Allen Wrench 📌 Note: These shocks are fully tunable and designed for custom performance tuning. 📊 Specifications: Scale: 1/18 Length: 58mm (2.28in) Compressed Length: 41mm (1.61in) 🏁 Elevate Your Arrma Grom’s Suspension Performance! 🔥 Whether you're looking for better handling, smoother dampening, or a stylish upgrade, the NEXX Racing Reservoir Shocks provide precision performance and ultimate durability. 💨 Upgrade today and take your Arrma Grom to the next level! 🏆🏁

Read more less

 ⚡ Sensored Precision. Castle Power. Waterproof Performance. Take your mini-scale RC to the next level with the Castle Creations Mamba Micro X2 Brushless Combo. Featuring the powerful 1007-6350Kv Sensored Brushless Motor paired with the legendary Mamba Micro X2 ESC, this system delivers ultra-smooth throttle response, incredible efficiency, and race-proven reliability for 1/14 and 1/16 scale vehicles. Whether you're crawling technical terrain, racing on the track, or launching hard off the line, the Mamba Micro X2 provides the precision, power, and tunability that Castle Creations is known for. ⚡ Features: 🔥 Powerful 6350Kv 4-pole sensored brushless motor⚙️ Sensored and sensorless operation capability💧 Waterproof ESC design for all-weather driving📱 Castle Link programmable via USB or optional Bluetooth adapter📊 Built-in data logging and telemetry support🚀 CRYO-DRIVE technology improves efficiency and reduces heat🔧 Adjustable external 10-amp BEC included📡 Auxiliary wire functionality for on-the-fly tuning adjustments🔔 Audible alerts for diagnostics and setup assistance🏁 Exceptional throttle control and ultra-smooth starts ⚙️ Mamba Micro X2 ESC Specifications: Input Voltage: 2S–4S LiPo (16.8V Max)BEC Output: 5.5V or 7.5V AdjustableWaterproof: Yes*Reverse: Yes (can be disabled)Brake: ProportionalCooling Fan: Not IncludedDimensions: 41.6 x 29.4 x 21.3mmWeight: 47gMotor Connectors: 3.5mm Bullet Connectors ⚙️ 1007-6350Kv Motor Specifications: Kv Rating: 6350KvInput Voltage: 2S–3S LiPoMaximum RPM: 80,000Diameter: 28mmLength: 50.3mmWeight: 114.8gShaft Diameter: 3.17mm (1/8")Connectors: 4mm Male Bullets 🚀 Advanced Castle Technology: ⚡ QUIETSENSE sensor technology for ultra-precise motor synchronization🛡️ Flux Shield design minimizes sensor interference🔥 Improved 4-pole, 12-slot motor design for greater efficiency and lower temperatures📈 Data logging for advanced performance analysis📲 Compatible with Castle Link software and Castle Link mobile app📡 Telemetry ready for supported Futaba radio systems 📦 Includes: (1) Castle Creations Mamba Micro X2 ESC(1) Castle Creations 1007-6350Kv Sensored Brushless Motor(2) Motor Sensor Harnesses(1) Quick Start Guide(1) Castle Decal Sheet 🔧 Compatibility: Axial Yeti Jr.LaTrax TetonLosi Mini-T 2.0Traxxas 1/16 RallyMany 1/14 and 1/16 scale vehicles up to approximately 2.75 lbs ⚠️ Important Notes: 🔋 ESC supports 2S–4S LiPo batteries🔋 Motor is recommended for 2S–3S LiPo operation🔧 Battery connector must be installed separately🌡️ Monitor motor and ESC temperatures and keep below 180°F💧 Waterproof design is not intended for full submersion 💡 Pro Tip: For racers, the sensored setup delivers smoother launches and more predictable throttle control. For crawlers, the precise low-speed operation and incredible torque make technical climbs easier and more controllable than traditional sensorless systems. 🏁🔥

Read more less

🔧 Stronger Steering. Sharper Response. Clean Upgrade. The Hot Racing Aluminum Servo Saver Set is a durable upgrade for Arrma Grom platforms, replacing the stock plastic saver with a more precise and reliable aluminum design. 🏁 About the Aluminum Servo Saver 🎯 Precision & Control CNC-machined for an accurate fit, this servo saver helps improve steering response and consistency—especially in demanding off-road conditions. 💪 Durable Upgrade Constructed from lightweight aluminum, it offers increased strength over stock plastic components while maintaining a clean, premium look. ⚠️ Servo Compatibility Note Designed specifically for 25T spline servos. This will NOT work with the stock Grom servo. 🔧 Key Features ✔ CNC-machined aluminum construction✔ Stronger than stock plastic parts✔ Lightweight design✔ Anodized finish for corrosion resistance✔ Improves steering response and durability✔ Designed for 25T spline servos 📦 Includes (1) Aluminum Servo Saver Set (25T) 🚗 Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom 🔧 Upgrade your steering. Tighten your control. Drive with confidence.    

Read more less

The Team Associated Factory Team Carbon Front Suspension Arms for the RC10T7 and RC10SC7 are a high-performance upgrade designed to increase rigidity and improve suspension consistency under demanding racing conditions. Built using AE’s legendary carbon composite material, these arms reduce flex found in standard suspension components, resulting in more precise handling and predictable performance on the track. Engineered as part of the Factory Team lineup, these arms deliver race-proven strength and durability while maintaining perfect fit and compatibility with the RC10T7 and RC10SC7 platforms. Features Factory Team carbon composite construction Increased rigidity for improved suspension response Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency during high-stress driving Direct-fit Factory Team upgrade Includes (2) Factory Team Carbon Front Suspension Arms Compatibility Team Associated RC10T7 Team Associated RC10SC7 A race-ready suspension upgrade designed for drivers looking for improved precision, durability, and consistency on the track. 🏁

Read more less

The F2 body from JConcepts brings IFMAR World Championship–winning design to the Losi 22X platform. Precision-engineered for a tight, clean fit, the F2 slides perfectly over the top deck and under the front shock tower, delivering race-proven aerodynamics and durability across dirt, carpet, and turf. About the F2 Buggy Body Proven Design & Advanced FeaturesThe aggressive, forward-biased cab improves steering response and adaptability on changing surfaces. A louvered roof with the Finnisher “V” profile enhances airflow and stability, while chamfered side-pods blend seamlessly into the cab for reduced drag. Extra rear windows add style, and reinforced spur-gear guard coverage with added clearance helps absorb impacts. Choose Standard or Lightweight thickness to match track conditions and durability needs. Features Proven F2 design from IFMAR World Championship lineage Forward-positioned cab with steep windshield for multi-surface control Tight chassis-outline fit for secure, clean mounting Louvered roof & Finnisher “V” for improved airflow and stability Double-step side-pods and roof for standout styling Reinforced spur-gear guard coverage with added clearance Includes (1) TLR 22X “F2” 1/10 Buggy Body (Clear) — Standard (0707) or Lightweight (0707L) (2) 6.5" Wings (carpet/turf/dirt) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.  

Read more less

📡 Unlock FlySky Control for Your Mini-Z EVO! The Kyosho FlySky Noble Mini-Z EVO Receiver lets you take full advantage of FlySky’s advanced performance and precision on your Mini-Z platform. Designed specifically for seamless compatibility with FlySky Noble transmitters, this receiver transforms your Mini-Z EVO chassis into a responsive, competition-ready machine. Enjoy smoother throttle response, faster input translation, and a rock-solid connection every time you race. ⚡ Features: Enables use of FlySky Noble transmitters with Mini-Z EVO chassis Provides fast, interference-free AFHDS3 signal performance Plug-and-play installation — no soldering required Designed for maximum response and precision control Compact and lightweight for ideal chassis balance Genuine Kyosho quality and reliability 📦 Includes: (1) Kyosho FlySky Noble Mini-Z EVO Receiver 🔧 Compatibility: Kyosho MR-02 Kyosho MR-03 💡 Pro Tip:Pair with a FlySky Noble NB4+ or NB4+ Pro transmitter for the ultimate precision control setup on your Mini-Z EVO!

Read more less