JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are engineered for carpet and turf racing, offering exceptional traction, stability, and durability. Designed with radius-positioned pins and a low-profile carcass, these tires provide quick transitions, minimal side-wall deflection, and maximum grip on high-traction surfaces. Pre-mounted on JCO3348 Mono wheels and featuring plush open-cell inserts, they are race-ready straight out of the package. Features: ✔️ Pre-mounted for quick and hassle-free installation✔️ Low-profile carcass for reduced side-wall flex and quicker response✔️ Reverse “water tower” pin shape for enhanced grip and control✔️ Radius-positioned pin arrangement for maximum surface contact✔️ Directional sidewall lugging for precise cornering and acceleration✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Plush open-cell inserts included for added control and stability✔️ Mounted on JCO3348 Mono wheels in white or fluorescent yellow In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Tires (Pink Compound)📦 (2) JCO3348 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" Rear Buggy Wheels✅ Standard 12mm Hex Fitment

Read more less

  JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires (White OR Yellow) (2) (Pink) (Carpet) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires are engineered for carpet and turf racing, delivering precision steering, exceptional grip, and quick responsiveness. Built on a super low-profile carcass, these tires reduce side-wall deflection and roll for maximum consistency at high speeds. Mounted on JCO3376 Mono wheels (white or fluorescent yellow), and assembled without inserts, they’re ready to hit the track right out of the package. Features: ✔️ Pre-mounted for quick and consistent installation✔️ Super low-profile carcass for stability and quick transitions✔️ Reverse “water tower” pin design for precise and deep carpet traction✔️ Radius-positioned pin layout for consistent grip and wear✔️ Alternating pin rows for increased steering and side-bite✔️ Directional sidewall lugging for added mid-corner grip✔️ Scalloped tire beads reduce unsprung weight✔️ Mounted on JCO3376 Mono wheels (White or Yellow) In The Box: 📦 (2) Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires (Pink Compound)📦 (2) JCO3376 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 2WD Front Buggy Wheels✅ 12mm Hex

Read more less

  ProTek RC 48P Lightweight Aluminum Pinion Gear (13T–38T)⚙️ Hard Anodized | Lightweight | 3.17mm Bore The ProTek RC 48 Pitch Lightweight Aluminum Pinion Gear is engineered for serious racers looking to reduce rotating mass and increase throttle response. These precision-cut gears are CNC-machined from high-quality 7075-T6 aluminum and hard anodized for exceptional durability and performance. Ideal for off-road and on-road applications using 48 pitch gears, they feature laser-etched tooth counts for quick identification and a lightweight design that promotes quicker motor spool-up and improved acceleration. 🔧 Features: 48 pitch Available in 13T–38T sizes CNC-machined 7075-T6 aluminum Hard anodized for strength and wear resistance Lightweight design with additional machining on 18T and larger Tooth count laser-etched for easy ID Includes set screw for secure mounting 3.17mm (1/8") motor shaft bore 🚀 Optimize your drivetrain with reduced rotational mass and faster response out of corners! 🧩 Includes: (1) Pinion Gear (select size from dropdown) (1) Set Screw

Read more less

🔧 Boof RC Aluminum 30x30x10mm Fan for ESC & Motor (Purple, Red, Blue, or Gold) The Boof RC 30x30x10mm Aluminum Fan is a compact, high-RPM cooling solution designed to keep your ESC or motor running cool under extreme conditions. Whether you're bashing, crawling, or racing, this fan helps prevent overheating and ensures consistent performance. Crafted with a durable aluminum housing and finished in vibrant anodized colors, this fan delivers both performance and style. ✅ Features: 30x30x10mm size fits most ESC and motor setups High-speed design for efficient cooling CNC-machined aluminum housing for strength and heat dissipation Works with both ESCs and motors Available in Purple, Red, Blue, or Gold BOOF RC sticker included!

Read more less

JConcepts Mono 2.2" "Slim" Front Wheels (Yellow, 4pcs) – 12mm Hex Overview:The JConcepts Mono 2.2" Slim Front Wheels are precision-designed for narrow front tires commonly used in carpet and Astroturf racing. Molded from durable high-impact material, these lightweight wheels offer a clean dish-style design with functional features that racers demand. The shallow 12mm hex design ensures quick, clean installs across a wide variety of 2WD buggy platforms. Whether you're mounting up on a Team Associated B6, Yokomo YZ-2, or Kyosho RB6, these wheels offer an ideal fit for tight indoor racing conditions. Each pack includes four wheels, available in fluorescent yellow for high visibility and style. Features: Slim width for narrow tire applications (carpet/Astro) Lightweight, one-piece construction Popular dish styling with vent holes Outer glue catch for cleaner tire mounting Polished face with embossed JC logo Pack of 4 wheels Available in bright white or fluorescent yellow Compatibility Includes (but not limited to): ✅ Team Associated: B7, B7D, B6, B6.1, B6.1D, B6.2, B6.2D, B5, B5M, B4 series✅ Kyosho: RB5, RB6, RB7✅ Schumacher: Cougar KF2, KF2 SE, KD, KC, LD3✅ Yokomo: YZ-2 CAL, CAL2, CAL3, DTM, DTM WC, DTM2, DTM3✅ Serpent: SRX-2 MM, RM✅ XRAY: XB2 (2017–2019 Carpet/Dirt editions)

Read more less

Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

Limitless gift cards are just that - Limitless!  They never expire.  Use a-little, use a-lot.  Give it away or keep it for yourself!  *Promotional Gift Cards cannot be used with any discounted products or other discount codes. 

Read more less

TRAXXAS TRX-4M Ford® Bronco – 1/18 Scale RTR Trail CrawlerOfficially Licensed • Clipless Hard Body • Fully Ready-to-Run! Don’t forget to sign up for Limitless Rewards and earn 5% back in in-store credit on your purchase! 💰🛍️ Conquer the trail with classic style in the TRX-4M Ford Bronco — the perfect mix of small-scale portability and real-world crawling performance. Loaded with scale detail, waterproof electronics, and ready to roll right out of the box! 🏞️ Iconic Bronco Looks + Hardcore Performance 🔵 Officially Licensed Ford® Bronco Clipless Body – Tough molded ABS, full trim details, & LED bumper lights 💧 Waterproof ECM-2.5™ Electronic Control Module – ESC, receiver, and LED controller in one unit 🔋 Titan® 180 87T Brushed Motor – Front-mounted for optimal crawling balance 🧱 Heavy-Duty Steel Ladder Frame – Deep C-channel chassis with reinforced center 🛞 BFGoodrich® Mud-Terrain T/A® KM3 Tires – Realistic 1" wheels and trail-tuned rubber compound 📡 TQ™ 2.4GHz Transmitter – Comfortable grip with long-range precision 🔧 Rugged Off-Road Features Full-time 4WD shaft-driven drivetrain Locked spool front & rear differentials Triangulated 4-link suspension Heavy-duty steel axles and center driveshafts Oil-filled GTM™ shocks with preload adjusters Direct steering with heavy-duty 2065T metal-gear servo Modular gearbox supports optional low-range or speed gear sets 🔋 Battery & Charging 7.4V 750mAh 2S LiPo Battery (iD®) 2-Amp USB Fast Charger with iD® Technology 60+ minutes of run time on a single charge! 📦 What’s in the Box?✔ (1) TRX-4M Ford® Bronco 1/18 Scale Crawler✔ (1) Titan® 180 Brushed Motor✔ (1) ECM-2.5™ Waterproof ESC/Receiver Unit✔ (1) 7.4V 750mAh 2S iD® LiPo Battery✔ (1) 2A USB Charger✔ (1) TQ™ 2.4GHz 2-Channel Transmitter✔ (1) Quick Start Guide✔ (1) Tool Kit 📐 Technical Specs: Scale: 1/18 Length: 11 in (279 mm) Width: 4.9 in (124 mm) Height: 5.3 in (135 mm) Wheelbase: 6.1 in (155 mm) Ground Clearance: 1.12 in (29 mm) Weight: 1.06 lbs (483 g) Drivetrain: 4WD Differentials: Locked spool Gear Ratio (Internal): 11.38 Motor: Titan 180 Brushed (87-turn) Radio System: TQ™ 2.4GHz 🔥 Scaled Down. Trail Tough. Bronco Bold.Whether you’re crawling over rocks or cruising indoors, the TRX-4M Ford Bronco delivers big performance in a small package. With premium features and a legendary look, this mini rig is ready for adventure!

Read more less

Axial SCX24 1967 Chevrolet C10 1/24 4WD RTR Scale Mini Crawler (Orange or Black) 🔥 The Axial SCX24 1967 Chevrolet C10 is a compact yet mighty 1/24 scale crawler designed for adventure anywhere—whether it’s crawling your desk, climbing over laundry piles, or tackling backyard obstacles. This fully assembled, ready-to-run (RTR) mini truck brings the classic styling of the 1967 Chevy C10 to the SCX24 platform, combining vintage looks with modern RC performance. With full-time 4WD, rugged steel frame rails, oil-filled shocks, and a durable drivetrain, this tiny truck is built for serious off-road challenges. Water-resistant electronics let you take it outside, while its officially licensed Method MR307 wheels and BFGoodrich Krawler T/A KX tires provide realistic scale details and incredible traction. 🔹 Key Features: ✅ Ready-to-Run (RTR) – Fully assembled with everything needed to drive right out of the box!✅ Officially Licensed 1967 Chevrolet C10 Body – A classic and rugged look with vintage styling.✅ Steel C-Channel Frame Rails – Provides a solid and durable chassis foundation.✅ Full-Time 4WD Drivetrain – Metal worm gears improve ground clearance and provide strong drag brakes.✅ Durable Front & Rear Solid Axles – Built with steel axles, stub axles, and dogbones for extra strength.✅ 3-Link Front / 4-Link Rear Suspension – Optimized geometry reduces torque twist for improved crawling.✅ Oil-Filled Shocks – Delivers smooth articulation over uneven terrain.✅ Licensed Method MR307 Wheels & BFGoodrich Krawler T/A KX Tires – Realistic design and superior grip.✅ Front-Mounted LED Lights – Bright LEDs in the bumper for nighttime crawling.✅ Horizon 2.4GHz Radio System – Reliable control with interference-free performance. 📦 In The Box: ✔️ (1) Axial SCX24 1967 Chevrolet C10 1/24 4WD RTR Mini Crawler✔️ (1) Spektrum SLT2 2.4GHz Radio System✔️ (1) Axial AS-1 Servo✔️ (1) Spektrum 350mAh LiPo Battery✔️ (1) USB-C Charger✔️ (4) AA Batteries for Transmitter 📏 Specifications: 🔹 Scale: 1/24🔹 Drive System: 4WD🔹 Power Source: 2S LiPo (7.4V)🔹 Length: 8.46" (215mm)🔹 Wheelbase: 5.24" (133.2mm)🔹 Width: 3.92" (99.5mm)🔹 Height: 4.51" (114.6mm)🔹 Weight: 8oz (226.8g) 🏁 Needed to Complete: NOTHING! The Axial SCX24 1967 Chevrolet C10 is ready to hit the trails right out of the box—just charge it up and start crawling!

Read more less

TRAXXAS TRX-4M Chevrolet® K10® High Trail™ Edition – 1/18 RTR Trail CrawlerOfficially Licensed • Clipless Hard Body • High Trail Lift Kit • Fully Ready-to-Run! Don't forget to sign up for Limitless Rewards — you'll get 5% back on every purchase as in-store credit! 💰🙌 Take scale crawling to the next level with the TRX-4M K10 High Trail Edition! This mini truck is packed with the same trail-proven features as its larger TRX-4 brothers, all tucked into a 1/18 scale powerhouse that’s easy to carry, fun to drive, and delivers real off-road performance. 🛻 Legendary K10 Looks + Trail-Rated Capability 🔵 Officially Licensed Chevrolet® K10 Clipless Body – Highly-detailed ABS hard body with molded mirrors, door handles, roll bar & LED headlights 💧 Waterproof ECM-2.5™ Control Module – Combines ESC, receiver & LED control with drag brake modes 🔋 Titan® 180 87-Turn Brushed Motor – Forward-mounted for optimized balance and crawling dynamics 🧱 Extended Steel Ladder Frame Chassis – Rigid full-length design with thicker center section for added strength 🛞 Mickey Thompson® Baja Pro™ XS Tires – Mounted on 1” chrome replica 8-hole wheels 📡 TQ™ 2.4GHz Radio System – Comfortable, long-range control in a compact package 🔼 High Trail™ Suspension Lift Kit Revised shock towers & longer links Triangulated 4-link suspension More clearance for rougher terrain Oil-filled GTM™ shocks for realistic damping Adjustable preload and rebuildable design 🔋 Battery & Charging 7.4V 2-cell 750mAh LiPo Battery (iD®) 2-amp USB Fast Charger with iD® Technology Over 1 hour of trail time per charge! 📦 What’s in the Box?✔ (1) TRX-4M Chevrolet K10 High Trail Edition 1/18 Crawler✔ (1) Titan® 180 Brushed Motor✔ (1) ECM-2.5™ ESC/Receiver Combo✔ (1) 7.4V 750mAh 2S LiPo Battery (iD®)✔ (1) 2A USB Charger✔ (1) TQ™ 2.4GHz Transmitter✔ (1) Quick Start Manual✔ (1) Tool Kit 📐 Specs at a Glance: Scale: 1/18 Length: ~10.6 in (varies slightly by body style) Width: ~5.0 in Height: ~5.0 in Wheelbase: 6.38 in (162mm) Weight: ~1.03 lbs (468g) Drivetrain: Full-time Shaft-Driven 4WD Transmission: Single-Speed Differentials: Locked spool Gear Ratio (Internal): 11.38 🔥 Built to Crawl. Styled to Impress.Whether you're on the trail or the coffee table crawl course, the TRX-4M K10 High Trail Edition delivers big thrills in a small package. Classic styling meets modern performance — and it’s ready to run right out of the box.

Read more less

Traxxas EZ-Peak Dual 3S Completer Pack (5000mAh x2, 11.1V) w/iD ChargerTwo Batteries. One Powerful Charger. All the Performance. Completer Pack Overview:The Traxxas EZ-Peak 3S Completer Pack is the perfect solution for vehicles that require dual 3S LiPo batteries—like the X-Maxx and XO-1—or for drivers who just want double the runtime. With two 5000mAh 11.1V Power Cell LiPos and the EZ-Peak Dual 100W Charger, you get fast, safe charging with Traxxas iD® technology and power that doesn’t quit. Why You’ll Love It: iD® Auto Battery Detection: Just plug it in. No setup, no fuss. Charges two batteries simultaneously—even mixed chemistries (LiPo + NiMH). 100W output delivers up to 8A per channel for high-speed charging. Compatible with legacy Traxxas High-Current Connectors (Advanced Mode). Durable, compact design with built-in balance ports for older LiPos. Battery Specs (TRA2872X): Type: LiPo Configuration: 3S (11.1V) Capacity: 5000mAh Continuous Discharge: 25C (125A) Burst Rate: 50C (250A) Max Charge Rate: 2C (10A) Dimensions: 155 x 26 x 44mm Weight: 13.3oz (376g) Charger Specs (TRA2972): Output Power: 100W Charge Current: 1A–8A Battery Types: 2–3S LiPo / 5–8 Cell NiMH AC Input: 100–240V Dimensions: 176 x 138 x 57mm Net Weight: 575g In the Box:✔ (1) Traxxas EZ-Peak® Dual 100W iD® Charger✔ (2) Traxxas 3S 5000mAh 25C LiPo Batteries w/iD® Connectors IMPORTANT:⚠️ For safety, only charge these batteries with Traxxas iD-equipped chargers.⚠️ Never leave charging batteries unattended. Always follow LiPo safety practices.

Read more less

🔋 Traxxas EZ-Peak 2S Single Completer Pack (Charger + 5800mAh LiPo) Looking to power up your Traxxas vehicle the easy way? The EZ-Peak Completer Pack includes the trusted Traxxas EZ-Peak Plus iD Charger and a powerful 5800mAh 2S 25C LiPo battery — perfect for most 2S-compatible Traxxas RTR models. 💡 No complicated setup. Just plug in and go! ⚡ What's Inside: (1) Traxxas EZ-Peak Plus Charger (TRA2970) (1) 5800mAh 2S 25C LiPo Battery w/iD (TRA2843X) 🔌 Charger Features: iD Auto Battery Recognition for safe, easy charging Charges 2S–3S LiPo or 5–8 cell NiMH batteries Up to 4A fast charging (40W Max) Built-in balance ports — no balance boards needed Storage Mode to extend battery life Compact and reliable with AC power input 📐 Charger Specs: Input: 100–240V AC Output: 1.0–4.0A (40W Max) Dimensions: 146 x 123 x 53mm Weight: 365g 🔋 Battery Specs (TRA2843X): Type: 2S LiPo Capacity: 5800mAh Continuous Discharge: 25C (145A) Max Burst Rate: 50C (290A) Voltage: 7.4V Dimensions: 137 x 25 x 43mm Weight: 308g iD-equipped for use with Traxxas iD chargers ✅ Perfect For:Anyone who needs a complete 2S battery and charging solution for their Traxxas vehicle — especially for models like the Slash, Rustler, Bandit, Stampede, and more.

Read more less

Traxxas Maxx 1/10 Brushless 4WD Monster Truck w/WideMaxx Kit (RTR) Built Wider. Built Stronger. Built for More. Take your bashing to the next level with the Traxxas Maxx® featuring the factory-installed WideMaxx® Suspension Kit. With a longer chassis, bigger tires, and increased width, this beast is engineered for extreme performance, insane durability, and relentless fun. ✅ Factory-Installed WideMaxx Suspension – 1.5” Wider Stance✅ Pre-Mounted Sledgehammer® Tires – Maximum Grip & Self-Cleaning✅ Clipless Body System – Easy One-Hand Removal & Install✅ GT-Maxx™ Aluminum Shocks – Tuned for Big Air✅ 540XL Brushless Motor – 60+ MPH Capable (w/Optional Gearing)✅ Waterproof Electronics – Bash Anywhere, Any Weather Built to Bash Harder This version of the Maxx® comes with a longer wheelbase for added stability and battery space, steel-gear differentials, aluminum splined driveshaft, and full-contact sealed bearings. Whether you're sending it off ramps or tearing through mud, the Maxx is ready. Specifications: Length: 22.50" (572mm) Width: 15.95" (405mm) Wheelbase: 13.85" (352mm) Weight: 10.4 lbs (4.7kg) Motor: Traxxas 540XL (2400kV) ESC: Velineon® VXL-4s Waterproof Max Speed: 60+ MPH (with optional gearing & 4S battery) Drivetrain: 4WD Tires: Sledgehammer® (5.64") Shocks: GT-Maxx™ Aluminum In The Box: ✔️ (1) Traxxas Maxx® 4WD Monster Truck with WideMaxx Kit✔️ (1) TQi™ 2.4GHz Radio System✔️ (1) Traxxas 540XL Brushless Motor✔️ (1) Velineon® VXL-4s ESC✔️ Quick Start Guide & High-Quality Maintenance Tools Needed to Complete: 🔋 (1) 3S or 4S LiPo Battery with Traxxas iD® Connector⚡ (1) Compatible Traxxas iD® Battery Charger🔋 (4) AA Batteries for the Transmitter

Read more less

🔩 BOOF RC 48P Aluminum Pinion Gear (16T–40T) This is a BOOF RC 48 Pitch Lightweight Aluminum Pinion Gear — precision-engineered for off-road applications where quicker motor spool-up and acceleration make all the difference. CNC-machined from aluminum and hard anodized for strength, these gears are built to deliver smooth, consistent power. Gears 16T and larger feature weight-reducing cuts on the back side, maximizing performance without compromising durability. Each gear includes a setscrew for easy installation. 💡 Choose your tooth count from the menu above. ✅ Features: 48 Pitch, perfect for a wide range of off-road vehicles Available in 16T to 40T sizes Lightweight, hard-anodized aluminum construction Machined for precision and durability Reduced rotating mass = faster acceleration Includes setscrew BOOF RC sticker included

Read more less

🔥 JConcepts Swaggers 2.2" Carpet Truck Front Tires (Pink) – PairDial In Your Front End for Precision Carpet Control! 🏁 Designed for the demands of high-traction carpet and astro turf racing, the JConcepts Swaggers 2.2" Truck Tires offer unmatched cornering consistency, straight-line tracking, and smooth response. With offset angular ribs and a low-profile carcass, these front tires help maintain control under pressure—making your stadium truck faster and easier to drive on aggressive race surfaces. ✨ Key Features: ✅ Precision-Molded for JConcepts 2.2” Truck Wheels (JCO3354W or JCO3354Y) 🌀 Offset Angular Rib Design – Optimized for corner speed and straight-line tracking 🔧 Low-Profile Carcass – Improves steering feel and stability on high-grip tracks 🛞 Sidewall Support Ribs – Enhance consistency during aggressive cornering 🟣 Pink Compound – Medium-soft rubber with excellent grip and wear balance 🧩 Open Cell Foam Inserts – Included for optimal tire performance across conditions 📦 Includes: (2) JConcepts Swaggers 2.2" Truck Front Tires (Pink Compound) (2) Open Cell Inserts 🧩 Compatibility: Fits most 1/10 stadium trucks using 2.2" truck wheels Recommended for use with JConcepts wheels: JCO3354W (White) or JCO3354Y (Yellow) 💨 Steer sharp. Stay locked in. Race like a pro with JConcepts Swaggers!

Read more less

Traxxas ProGraphix® R/C Body Paint – 5 oz or 13.5 oz Aerosol (Multiple Colors Available) Traxxas ProGraphix® Custom R/C Paints deliver professional-grade, airbrush-like results with the ease and convenience of aerosol spray cans. Whether you’re painting a new body or freshening up a favorite, ProGraphix gives you bold color, clean coverage, and long-lasting results. ProGraphix® Paint Features: Huge variety of custom colors Available in 5 oz and 13.5 oz sizes Smooth, ultra-fine spray pattern Fast-drying formula Clog-resistant comfort nozzle Resistant to nitro fuel Formulated for polycarbonate (Lexan®) bodies 🎨 For best results, follow instructions on the can. Results may vary depending on surface prep, application, and backing colors. ⚠️ DANGER: Extremely flammable liquid and vapor. Keep out of reach of children.⚠️ CALIFORNIA PROP 65 WARNING: Contains chemicals known to cause cancer and birth defects. Learn more

Read more less

Precision Bonding for High-Performance Tires The Team Losi Racing Thin Tire Glue is the go-to choice for RC racers and hobbyists who demand strong, reliable tire bonds. Designed with a thin viscosity for quick penetration, this CA glue creates a secure, long-lasting hold — ensuring your tires stay locked in place even under high-speed runs and intense bashing sessions. Perfect for on-road, off-road, and crawler tires, this 1oz bottle offers plenty of glue for multiple applications, making it an essential tool for your RC kit. ⚡ Key Features: ✅ Thin Viscosity CA Glue — fast-setting for deep penetration and strong bonds.✅ Ideal for Tire Gluing — perfect for foam, rubber, and RC wheel materials.✅ 1oz Bottle — enough for multiple tire sets.✅ Quick-Drying Formula — reduces wait time so you can hit the track faster.✅ Reliable Hold — designed to handle high speeds, jumps, and hard turns. 📏 Specifications: 🔹 Type: Thin Viscosity CA Glue🔹 Size: 1oz (28.3g)🔹 Use: Tire Gluing Applications 💡 Pro Tip: For best results, clean tire beads and rims before applying glue, and use a tire gluing jig for added precision.

Read more less

TRAXXAS TRX-4M Land Rover® Defender® – 1/18 RTR Trail CrawlerAuthentic Clipless Hard Body • Trail-Tuned Suspension • Ready-to-Run! Don’t forget to sign up for Limitless Rewards — you’ll get 5% back on every purchase as in-store credit! 🙌 Hit the trails with the officially licensed TRX-4M Land Rover Defender — a premium 1/18 scale trail truck that blends scale realism with serious off-road capability. Designed for adventure, this compact crawler features waterproof electronics, high-torque drivetrain, and over an hour of run time on the included LiPo battery. 🛻 Scale Realism Meets Trail Performance 🟢 Clipless Licensed Defender Body – Durable molded ABS with fender flares, rock sliders, mirrors, door handles, and LED bumper lights 💧 Waterproof ECM-2.5™ Control Module – Combines ESC, receiver, and LED control with drag brake modes 🔋 Titan® 180 Brushed Motor – 87-turn, forward-mounted for optimized crawling balance 🧱 Steel Ladder Frame Chassis – High-strength C-channel design 🛞 Canyon Trail AT Tires – Mounted on 1" detailed wheels with 7mm hex 🧭 Full-Time Shaft-Driven 4WD – Solid steel axles, locked differentials, and heavy-duty CV center driveshafts 💡 LED-Ready with Pro Scale® Functionality 📡 TQ 2.4GHz Transmitter – Simple, precise, and comfortable control 🛠️ Oil-Filled GTM™ Shocks – For realistic body movement and consistent handling 🔋 Battery & Charging Included 2S 750mAh LiPo Battery with iD® 2-Amp USB iD® Charger Over 1 hour of runtime per charge Two-stage low voltage protection (LVD) 📦 What’s Included✔ (1) TRX-4M Land Rover Defender 1/18 RTR✔ (1) Titan® 180 87T Brushed Motor✔ (1) ECM-2.5™ Waterproof ESC/Receiver✔ (1) 7.4V 750mAh 2S LiPo Battery (iD®)✔ (1) 2A USB-C Charger✔ (1) TQ™ 2.4GHz Transmitter✔ (1) Product Manual✔ (1) Tool Set 📐 Specs at a Glance: Scale: 1/18 Length: 11.0 in (279mm) Width: 4.9 in (124mm) Height: 5.3 in (135mm) Wheelbase: 6.1 in (155mm) Ground Clearance: 1.12 in (29mm) Weight: 1.06 lbs (483g) Drivetrain: Shaft-driven 4WD Transmission: Single-speed direct drive Differentials: Locked spool Internal Gear Ratio: 11.38 🔥 Hit the Trail in Iconic Defender Style!Trail-tough, scale-authentic, and totally ready-to-run — the TRX-4M Defender is the compact crawler you’ve been waiting for!

Read more less

JConcepts Pin Swag 2WD Front – Pink Compound – Pre-Mounted on 3376 Wheels (White or Yellow)Precision Steering Meets Turf Domination! 💥 The JConcepts Pin Swag Front Tires bring aggressive traction and pinpoint control to 2WD buggies on high-grip carpet and turf. Pre-mounted on 3376 wheels and glued for out-of-the-box performance, these tires combine the proven Swagger outer lug design with a dense pin layout for unmatched front-end steering. ✨ Key Features: ✅ Pre-Mounted for Convenience – Glued and ready to race! 🔧 Pink Compound – Soft, high-traction rubber optimized for carpet & turf 🛞 Pin x Swag Hybrid Tread – Swagger-style outer lugs + crisp center pins for bite and balance 💡 Ultra-Light Scalloped Bead Design – Reduces rotating mass for faster response 🌀 Low-Profile Carcass – Faster cornering, better transition through chicanes and jumps 🎨 Available in Bright White or Fluorescent Yellow wheels 🧩 Compatibility: Fits 2WD front buggies using JConcepts 3376 wheels 📦 Includes: (2) Pre-mounted JConcepts Pin Swag Front Tires – Pink Compound (2) JConcepts 3376 Wheels (choose white or yellow) ⚠️ Note: Sold as a pair. Please verify fitment with your buggy’s wheel requirements. 🏁 Take control of the corners and push the pace with the aggressive precision of JConcepts Pin Swags!

Read more less

1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Traxxas TRX-4 1/10 Scale Trail Crawler – High Trail Edition w/ '79 Chevrolet K10 Body (RTR) Factory Lifted. Iconic Chevy Style. All-Terrain Power. The Traxxas TRX-4 High Trail Edition with the officially licensed 1979 Chevrolet® K10 body delivers next-level trail performance in stunning scale detail. From the factory-installed Long Arm Lift Kit to the clipless body system and chrome 2.2" wheels, this truck is built to conquer any trail in style. ✅ Long Arm Lift Kit – Stands Over 1" Taller Than Standard TRX-4✅ Chevy K10 Hard Body with Molded Chrome Details✅ Clipless Mounting System – Sleek, Secure, & Hassle-Free✅ XL-5 HV ESC + Titan 21T Motor – 3S LiPo Ready✅ TQi 2.4GHz 4-Channel Radio – Full Control at Your Fingertips High Trail, Higher Performance Equipped with extended wheelbase, portal axles, 110mm GTS shocks, and oversized Canyon Trail tires, the K10 delivers both clearance and capability. Whether crawling over technical terrain or tearing down the trail, the High Trail Edition brings rugged performance and show-stopping looks to every adventure. Features: ✔️ Factory-installed Long Arm Lift Kit for increased ground clearance✔️ Chrome 2.2” Mag wheels with locking hub details✔️ Oversized Canyon Trail tires with foam inserts✔️ Extended wheelbase (336mm) for realistic scale proportions✔️ Clipless body mounting system – no body clips required✔️ Waterproof XL-5 HV ESC and 21T brushed motor✔️ Shift-on-the-fly high/low range transmission✔️ Remote-locking front and rear differentials✔️ Sealed ball bearings throughout✔️ Heavy-duty steel frame rails Specifications: Scale: 1/10 Length: 22.20" (563mm) Width: 10.60" (270mm) Height: 10.89" (277mm) Wheelbase: 13.23" (336mm) Ground Clearance: 4.0" (99mm) Weight: 7.38lbs (3.35kg, without battery) Tires: 5.3 x 2.14" (135 x 54mm) Wheels: 2.2 x 1.34" (56 x 34mm) Gear Pitch: 32P Battery Tray: 158.75 x 47 x 23/26mm Approach / Departure / Breakover Angles: 70° / 52° / 67° In The Box: ✔️ (1) Traxxas TRX-4 with '79 Chevrolet K10 Body✔️ (1) TQi™ 2.4GHz 4-Channel Transmitter✔️ Factory-installed XL-5 HV ESC & Titan 21T Motor✔️ Chrome 2.2" Wheels w/ Oversized Tires✔️ Maintenance Tools & Quick Start Guide Needed To Complete: 🔋 (1) 2S/3S LiPo or 4-7 Cell NiMH Battery⚡ (1) Compatible Battery Charger🔋 (4) AA Batteries for Transmitter

Read more less

JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tire (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tire is a top-tier pin tire option for carpet and turf racing. Designed for maximum traction and precise handling, this low-profile tire delivers quick transitions, minimal side-wall deflection, and superior cornering stability. The pre-mounted design ensures convenience and consistency, making it a go-to choice for competitive racers. Features: ✔️ Pre-mounted for hassle-free installation✔️ Low-profile carcass for fast transitions and stability✔️ Reverse “water tower” pin shape for maximum grip✔️ Radius-positioned pin arrangement for consistent traction✔️ Directional sidewall lugging for precise cornering control✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Mounted on JCO3353 wheels for durability and performance In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tires (Pink Compound)📦 (2) JCO3353 Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 4WD Front Buggy Wheels✅ Standard 12mm Hex Fitment  

Read more less

🟣 Maximum Grip for High-Bite Carpet Tracks The JConcepts Fuzz Bite Short Course Tires in Pink compound are specifically engineered for competitive carpet and turf racing. Designed with a precision pin layout and SCT-specific carcass profile, these tires deliver exceptional forward bite, responsive side grip, and consistent cornering on high-traction surfaces. The reverse “water tower” pin design – wider at the base and narrower at the top – maximizes surface engagement while minimizing rolling resistance. The staggered radial pin arrangement and directional sidewall ribbing provide superior control, making these tires ideal for tracks using tight-knit or CRC-style carpeting. Inside, heavy-duty sidewall ribs enhance stability under load, while the scalloped tire bead reduces weight and makes gluing easier. Open cell foam inserts are included for optimal performance out of the bag. ✨ Key Features: Designed for carpet/turf SCT racing SCT-specific profile with minimal sidewall deflection Reverse “water tower” pin design for bite and durability Radial pin layout for even wear and traction balance Directional ribbed sidewall for consistent steering feel Internal support ribs for improved structure and performance Lightweight scalloped bead design for reduced rotating mass Includes plush open cell inserts 📦 Includes: (2) Fuzz Bite Carpet SCT Tires (Pink Compound) (2) Open Cell Foam Inserts Compatibility:Fits standard 2.2"/3.0" Short Course Wheels (12mm hex, SCT-compatible) 🛠 Tires require mounting and gluing. Wheels not included.

Read more less

Arrma Granite Grom MEGA 4WD 380 Brushed 1/18 Monster Truck RTR (Includes Battery & Charger)  💥 Small Package, Massive Adventure! 💥 The Arrma Granite Grom 4X4 Monster Truck delivers big-time bashing in a compact 1/18 scale! Engineered with the same high standards as its larger Arrma RC siblings, this truck is built to handle intense stunts, rough terrain, and high-speed action. Featuring a clipless body mount, durable metal gear drivetrain, and powerful 4WD system, the Granite Grom is ready to take on any challenge, anytime, anywhere! 🏆🔥 ✅ Key Features: ✅ Epic Monster Truck Styling – Available in three rad color options.✅ Fast & Easy Clipless Body Mount – Secure attachment with effortless removal.✅ Powerful 4WD Drivetrain – Metal gears & fully enclosed for ultimate durability.✅ High-Strength Composite Chassis – Built tough for extreme bashing.✅ MEGA 380 Brushed Motor – Delivers powerful 2S LiPo performance.✅ Waterproof Electronics – Bash in rain, mud, or snow worry-free.✅ Spektrum SLT 2-Channel 2.4GHz Radio – Reliable, long-range control.✅ dBoots FORTRESS Monster Truck Wheels & Tires – Maximum grip on all terrains. 📦 In The Box: ✔️ (1) Arrma Granite Grom 1/18 4WD Monster Truck✔️ (1) 7.4V 1400mAh 2S LiPo Battery w/ IC2 Connector✔️ (1) Spektrum S10 Smart G2 Mini 2S USB-C Charger✔️ (1) Spektrum SLT2 2.4GHz Transmitter 📏 Specifications: 🔹 Scale: 1/18🔹 Length: 9.84" (249.9mm)🔹 Width: 7.87" (199.8mm)🔹 Height: 4.65" (118.1mm)🔹 Wheelbase: 6.5" (165.1mm)🔹 Weight: 28.2oz (800g)🔹 Drive System: 4WD🔹 Power Source: Electric 🏁 Needed to Complete: 🔌 (1) USB Power Adapter (QC 2.0/3.0 18W+) 💥 Ready to Bash Anywhere, Anytime! Whether you’re a first-time driver or a hardcore RC enthusiast, the Arrma Granite Grom delivers incredible fun, durability, and performance in a small but mighty package. 🚀💨 #ArrmaRC #GraniteGrom #RCBashing #MonsterTruck #SpektrumRC #ArrmaTough

Read more less

ProTek RC "Prodigy 610ez AC/DC" LiHV/LiPo Balance Battery Charger (2-6S/10A/100W) – High-Performance Charging Made Easy! 🔥 Versatile & Compact Charger for LiPo, LiHV, LiFe, NiMH & More! 🔋 The ProTek R/C "Prodigy 610ez AC/DC" Charger is a powerful, single-port charger designed for high-performance RC applications. Featuring AC/DC dual power input, 6S compatibility, and a 10A charge rate, this compact yet powerful charger is ideal for racers, bashers, and hobbyists who demand efficient and reliable charging. 🏆 With Hi-Voltage LiHV support, multiple safety features, and an intuitive LCD display, the 610ez ensures safe and efficient charging for all your battery needs! ✨ Key Features: 🔥 Single-Port Digital AC/DC Balance Charger – Compact & powerful charging solution 🔌 Dual Power Input (AC/DC) – Works worldwide with 100V-240V AC or 11V-18V DC input 🔋 High-Voltage LiHV Charging Mode – Supports LiHV batteries up to 4.40V per cell for extra power & performance ⚡ Maximum 10A Charge Rate, 100W Power Output – Fast & efficient battery charging 🔄 Multiple Charge Modes & Chemistry Support – Compatible with LiPo, LiHV, LiFe, NiMH, NiCd, Pb 📊 Backlit LCD Display – Easy-to-read blue backlit screen for real-time charge status 🛡️ Advanced Safety Features – Overcurrent, short circuit, overvoltage, and temperature protection 🛠️ Internal Resistance Measurement – Helps monitor battery health & performance 🆒 Built-in Cooling Fan – Maintains safe temperatures for longer charger life 📊 Specifications: AC Input Voltage: 100V-240V DC Input Voltage: 11V-18V Supported Battery Types: LiPo, LiFe, LiHV, NiMH, NiCd, Pb Supported Cell Count: LiPo/Li-Ion/LiFe/LiHV: 1-6S NiMH/NiCd: 1-15 cells Pb: 2-24V Max Charge Power: 100W Max Charge Current: 10A Max Discharge Power: 5W Balance Current: 400mA per cell Cooling System: Internal Fan Memory Slots: Stores up to 10 charge profiles Weight: 380g Dimensions: 130x115x61mm 📦 What’s in the Box? ✔ (1) Prodigy 610ez AC/DC Charger✔ (1) T-Style Charge Lead✔ (1) DC Input Wire✔ (1) Balance Board✔ (1) User Manual 📌 Note: NOT recommended for use with Traxxas ID or Spektrum Smart batteries without additional adapters. ⚠️ LiPo Battery Safety Warnings: 1️⃣ DO NOT leave batteries in your model while charging2️⃣ DO NOT leave batteries unattended during charging3️⃣ ALWAYS use balance charging for LiPo batteries4️⃣ ALWAYS charge batteries in a fireproof LiPo charging bag5️⃣ ONLY use a LiPo-compatible charger6️⃣ DO NOT over-discharge LiPo batteries7️⃣ READ & UNDERSTAND all instructions before operating 🏁 High-Performance Charging for Serious RC Enthusiasts! 🔥 Whether you're charging race packs, bashing batteries, or LiHV high-performance packs, the ProTek RC Prodigy 610ez AC/DC Charger delivers powerful, safe, and efficient charging. 💨 Upgrade today and charge smarter & faster! 🔋⚡🏁

Read more less

Nitro Pro JTP RT2 LP Servo – High-Speed, High-Torque LCG Performance! 🔥 The Most Powerful & Fastest LCG Servo Yet! The Nitro Pro JTP RT2 LP Servo sets a new standard for low-profile, high-performance servos, delivering incredible torque and lightning-fast response times. Engineered with a custom CNC billet case, patented stainless gear set, and ultra-fast processing, this servo is built for durability and precision in high-speed RC racing applications. 🏆 Whether you're competing in off-road, on-road, or high-speed bashers, the JTP RT2 LP Servo provides unmatched strength, reliability, and performance. ✨ Key Features: 🔥 458 oz-in Torque & 0.068s Transit Speed – Unrivaled power & lightning-fast response 🛠️ Custom CNC Billet Aluminum Case – Provides maximum durability & heat dissipation ⚙️ Patented Stainless Gear Set – Extreme strength & precision for heavy-duty performance 🔩 Lifetime Gear Replacement Warranty – Unmatched durability & reliability 💨 Low-Profile LCG Design – Optimized for balance & fitment in tight spaces 📊 Specifications: Torque: 458 oz-in Speed (Transit Time): 0.068 sec Gear Set: Patented Stainless Steel Case: Custom CNC Billet Aluminum Warranty: Lifetime Gear Replacement 🏁 Extreme Power & Precision for High-Performance RC! 🔥 Whether you're racing at top speeds or tackling extreme terrain, the Nitro Pro JTP RT2 LP Servo delivers unparalleled torque, durability, and precision control. 💨 Upgrade today and experience pro-level performance! 🏆🏁  

Read more less

Nitro Pro KS1-PRO LP Servo – High-Speed, High-Torque LCG Performance! 🔥 The Most Powerful & Fastest Low-Profile Servo Yet! 🚗💨 The Nitro Pro KS1-PRO LP Servo is designed for elite racers and high-performance RC builds, offering unmatched torque, ultra-fast response times, and exceptional durability in a low-profile, lightweight design. Featuring a patented stainless gear set, a custom CNC billet aluminum case, and a lifetime gear replacement warranty, this servo is built to handle the most demanding RC applications. 🏆 Whether you're racing on-road, off-road, or in high-speed competition events, the KS1-PRO LP Servo provides lightning-fast speed, extreme precision, and rock-solid durability. ✨ Key Features: 🔥 458 oz-in Torque & 0.068s Transit Speed – Incredible power & ultra-responsive control 🛠️ Custom CNC Billet Aluminum Case – Enhanced durability & heat dissipation ⚙️ Patented Stainless Steel Gear Set – Engineered for maximum strength & longevity 🏆 Lifetime Gear Replacement Warranty – Guaranteed durability & long-term reliability 💨 Low-Profile LCG Design – Optimized for weight balance & compact installations 📊 Specifications: Torque: 458 oz-in Speed (Transit Time): 0.068 sec Gear Set: Patented Stainless Steel Case Material: Custom CNC Billet Aluminum Warranty: Lifetime Gear Replacement 🏁 Extreme Power & Precision for High-Performance RC! 🔥 Whether you're pushing your RC car to the limits on the track or demanding top-tier performance for bashing, the Nitro Pro KS1-PRO LP Servo is the ultimate choice for high-speed, high-torque applications. 💨 Upgrade today and dominate with pro-level speed & control! 🏆🏁  

Read more less

Team Associated RC10B6.4 Factory Team Steering Bell Cranks – Durable Precision Steering! 🔧🔥 Upgrade your steering system with the Team Associated Factory Team Bell Cranks for the B6.4 and B7 platforms! Built to withstand the demands of high-level competition, these aluminum bell cranks improve steering response and add long-lasting strength to your front end. Whether you're looking for added rigidity or simply replacing worn parts, this Factory Team upgrade keeps your steering sharp and consistent. ⚙️ Key Features: ✅ Factory Team Quality – Built for race-level durability and precision✅ Rigid Steering Geometry – Reduces flex for consistent input✅ Aluminum Construction – Lightweight and strong for high-performance use✅ Direct Fit – Designed for seamless installation on multiple AE buggies 📦 Includes: (2) Aluminum Bell Crank Arms ✅ Compatibility: Team Associated RC10 B7 Original Team Associated RC10 B7D Team Associated RC10 B6.4 Team Associated RC10 B6.4D 🏁 Reinforce your front end and steer with confidence — upgrade to Factory Team bell cranks today! 🔵💨

Read more less

Traxxas Power Cell LiPo Battery (4S, 14.8V, 6700mAh, 25C) w/iD ConnectorBuilt for Brutality. Fueled by Power. Battery Overview:Unleash the full potential of your Traxxas X-Maxx®, XRT®, or Unlimited Desert Racer® with the Traxxas 4S Power Cell LiPo Battery. Delivering 14.8 volts of raw muscle and 6700mAh of capacity, this pack is made to deliver high-powered performance and runtime you can count on. With a 50C burst discharge rate, it’s the ultimate upgrade for serious speed and big-air bashing. NOTE:⚠️ This battery requires a Traxxas iD® Charger for safe charging.⚠️ Do not use with non-iD chargers. Key Features:✅ 14.8V 4S Power – Perfect for big rigs like X-Maxx and XRT✅ 6700mAh Capacity – Massive runtime, endless action✅ 25C Continuous / 50C Burst Discharge – Instant throttle response✅ Traxxas iD® High-Current Connector – Safe, fast, and easy charging✅ Semi-Rigid Construction – Durable, efficient pack design✅ Center Wire Exit – Ideal chassis fit without wire pinching✅ 12AWG Maxx Cable® – Maximum current, flexible wiring✅ Oversized Discharge Tabs – Low resistance, high output Specs: Type: LiPo Voltage: 14.8V (4S) Capacity: 6700mAh Continuous Discharge: 25C Burst Discharge: 50C Dimensions: 185 x 50 x 44mm Weight: 675g (average) ⚡ Compatibility: Traxxas Disruptor™ Traxxas Unlimited Desert Racer® Traxxas X-Maxx® Traxxas XRT®

Read more less

TRAXXAS TRX-4M Ford F-150 High Trail Edition – 1/18 RTR CrawlerOfficially Licensed Clipless Ford F-150 Body with High Trail Performance Get trail-ready with the TRX-4M Ford F-150 High Trail Edition – a 1/18 scale powerhouse built for serious off-road fun in a compact, go-anywhere package. With its officially licensed hard body, lifted High Trail™ suspension, and trail-proven 4WD drivetrain, this tiny titan delivers BIG on realism and capability. 🔧 Key Features: 🛻 Hard ABS Body – Molded-in color, realistic scale details, clipless mount system 💡 LED Headlights – Built-in with Pro Scale® functionality 🌧️ Waterproof ECM-2.5™ ESC/Receiver Combo – Three drive modes: Sport, Trail, and Crawl 📡 TQ™ 2.4GHz Transmitter – Full-size comfort and long-range precision 🔋 Titan® 180 87-Turn Brushed Motor – Forward-mounted for crawling balance 🧱 Steel Ladder Frame Chassis – Heavy-duty and rigid ⚙️ Full-Time 4WD with Locked Differentials – Metal drivetrain parts & spool-equipped axles 🛞 Replica Chrome Mag Wheels – Pre-mounted Mickey Thompson® Baja Pro™ XS tires 🚗 Lifted High Trail™ Suspension – Extended shock towers & oil-filled GTM™ shocks 🧠 Superior Steering Geometry – Metal gear servo with 45° angle and direct steering 🔋 Battery & Charging: 7.4V 2S 750mAh LiPo Battery with iD® Connector 2A USB-C iD® Charger Included Up to 1 hour+ run time on a single charge! 📦 Includes: (1) TRX-4M Ford F-150 High Trail Edition RTR Vehicle (1) Titan® 180 87T Brushed Motor (1) TQ™ 2.4GHz 2-Channel Transmitter (1) 7.4V 750mAh 2-Cell LiPo Battery (1) 2A USB iD® Charger (1) Product Manual Miscellaneous Tools 📐 Specs at a Glance: Scale: 1/18 Length: 10.6 in (269 mm) Width: 5.0 in (127 mm) Height: 5.0 in (127 mm) Wheelbase: 6.38 in (162 mm) Ground Clearance: 1.57 in (40 mm) Weight: 1.03 lbs (468 g) Drivetrain: Shaft-Driven 4WD Transmission: Single Speed (Direct Drive) Differential: Locked Spool Gear Ratio: 11.38 Motor: Titan® 180 (87T Brushed) ESC: ECM-2.5™ Brushed 🛠️ Optional Upgrades Available:Swap gear ratios, suspension tuning parts, and cosmetic accessories for even more trail domination and personalization. 🏁 Built to Conquer Trails – Big Performance in a Small Package!Whether you're crawling over rocks or cruising the backyard, the TRX-4M Ford F-150 High Trail Edition offers realistic looks, long run times, and unbeatable off-road fun in a small-scale size!

Read more less

JConcepts Fuzz Bite 2.2" Pre-Mounted Stadium Truck Tires (Pink Compound)🔥 Carpet & Turf Dominator – Choose White OR Yellow Wheels! The JConcepts Fuzz Bite 2.2" Stadium Truck Tires, pre-mounted and ready to dominate carpet and turf tracks, are designed for aggressive grip and long-lasting performance. Featuring a reverse “water tower” pin design and low-profile carcass, these tires provide quick response, excellent side bite, and strong forward traction on modern high-grip surfaces. Paired with durable 12mm hex wheels (available in White or Yellow), they’re glued, balanced, and race-ready right out of the package. Whether you’re hitting CRC-style carpet or tight indoor turf, the Fuzz Bite gives you precision handling with reduced sidewall flex and rotating weight. 💡 Perfect for competitive 1/10 stadium truck carpet & turf racing. 🧩 Key Features: Pre-mounted on 2.2" 12mm hex wheels (choose White or Yellow) Premium Pink compound for high-traction conditions Reverse “water tower” pin shape for maximum surface contact Low-profile design for reduced sidewall deflection Radius-positioned pin layout for balanced grip Directional sidewall lugging for consistent cornering Ultra-lightweight scalloped tire beads Includes plush open-cell inserts 📦 Includes: (2) Fuzz Bite 2.2" Stadium Truck Tires (Pink Compound) (2) Pre-mounted White or Yellow Wheels (12mm Hex) (2) Open Cell Foam Inserts (Pre-installed) 🛞 No gluing required – pre-mounted and ready to race!

Read more less

Traxxas EZ-Peak Live 4S Completer Pack (2x 6700mAh 4S LiPo Batteries + iD Dual Charger)Power Meets Intelligence – Complete Charging Solution for 4S Setups Completer Pack Overview:Unleash the full power of your high-performance Traxxas vehicles with the EZ-Peak Live 4S Completer Pack. Featuring two 6700mAh 14.8V 4-cell Power Cell LiPo batteries and the EZ-Peak Live Dual Charger, this combo is built to deliver 30+ volts of blistering brushless power and the smart charging simplicity Traxxas is known for. Whether you're powering an X-Maxx, XRT, or UDR, this is the ultimate plug-and-play performance upgrade. Why You’ll Love It: Traxxas iD® Technology: No guessing. Just plug in and charge with total confidence. Bluetooth Smart Enabled: Monitor charge status, performance, and more via the EZ-Peak Live App. Dual-Port Charging: Charge two LiPos at once—up to 4S per channel—with 200 watts of total output power. Fast Charging: MAXX Charge mode optimizes speed to get you back on the track faster. Built-In Safety: LiPo storage mode, audible alerts, and smart diagnostics for total battery protection. Charger Specs (TRA2973): Input Voltage: 100–240V AC Max Output: 200W (26A total) Battery Support: Dual 2S–4S LiPo / Dual 5–8 Cell NiMH Connectivity: Bluetooth (EZ-Peak Live App) USB Output: Built-in 2A port Dimensions: 204 x 174 x 68mm Battery Specs (TRA2890X): Type: LiPo Configuration: 4S (14.8V) Capacity: 6700mAh Discharge Rate: 25C Wiring: 12AWG Maxx Cable w/ Traxxas iD® Connector Dimensions: 185 x 50 x 44mm Weight: ~675g each In the Box:✔ (1) Traxxas EZ-Peak Live Dual iD® Battery Charger (TRA2973)✔ (2) Traxxas 4S 6700mAh 25C LiPo Batteries (TRA2890X) IMPORTANT:⚠️ For safety, only charge these batteries with a Traxxas iD-equipped charger.⚠️ Never leave LiPo batteries unattended during charging.

Read more less

BOOF RC 30x30x10mm High Speed Motor Fan (Purple, Red, Blue, or Gold) The BOOF RC 30x30x10mm High Speed Motor Fan is built for racers who demand efficient cooling and high-RPM performance. Designed to fit most 1/10 scale setups, this compact yet powerful fan helps prevent thermal shutdown and keeps your motor running at peak performance during the most demanding runs. Available in bold anodized colors — Purple, Red, Blue, or Gold — to match your ride's style. ✅ Features: Compact 30x30x10mm size – perfect for tight installs High RPM for maximum airflow and cooling CNC aluminum housing for durability and looks Available in Purple, Red, Blue, or Gold Ideal for 1/10 scale racing motors BOOF RC sticker included

Read more less

🎮 Futaba 3PV 3-Channel 2.4GHz Radio System w/ R203GF Receiver The Futaba 3PV delivers next-level performance in a lightweight, easy-to-use package. Whether you're a weekend warrior or serious racer, this system offers lightning-fast response, versatile protocol support (FHSS, S-FHSS, and T-FHSS*), and intuitive programming that gives you total control of your RC vehicle. This version includes the high-voltage R203GF receiver, ideal for use with brushless ESCs and digital servos. 🧠 Smart Features: Supports FHSS, S-FHSS & T-FHSS protocols* 10-model memory with name & data copy Failsafe, ABS braking, exponential, EPA, sub trim & mixing Steering dual rate, servo reversing, and 4th channel trim Large, easy-to-read LCD screen Auto power-off for battery conservation 📦 Includes: (1) Futaba 3PV 3-Channel Transmitter (1) Futaba R203GF 3-Channel Receiver (HV Compatible) 🔧 Requires: (4) AA batteriesOR 6.6V LiFe or 6V NiMH transmitter pack (sold separately) 📐 Specs: Transmitter: Type: 3-Channel FHSS/S-FHSS/T-FHSS* Protocol: FHSS/S-FHSS/T-FHSS* Receiver (R203GF): Channels: 3 Protocol: FHSS/S-FHSS Input Voltage: 4.8V–7.4V Dimensions: 33 x 23 x 8.5 mm Weight: 6g *Note: T-FHSS functionality only available when used with the R304SB receiver (sold separately).  

Read more less

  Nitro Pro FK-N500PRO2 – Gen 2 Speed Meets Strength 🚀 Meet the Nitro Pro FK-N500PRO2 — the next-gen 500-class servo built to dominate the track with blistering speed and unmatched reliability. Whether you're fine-tuning your steering response or demanding more from your throttle control, this servo delivers precision under pressure. 🔥 Packing ~500oz of torque at an insane 0.07 transit speed, it's a top-tier choice for racers and hardcore bashers who want nothing but the best. Wrapped in billet aluminum and loaded with upgraded internals, this servo is a compact powerhouse that performs lap after lap. ✨ Key Features: ⚡ ~500oz @ 0.07 Transit Speed – Lightning-fast response with serious pulling power🛠️ Upgraded Gear Sets & Electronics – Precision-tuned for durability and speed🏗️ Aluminum Billet Construction – Lightweight, rigid, and race-proven🧠 Brushless Motor – High-performance core for long-lasting performance💧 IP67 Waterproof – Rain? Mud? No problem. Built to survive extreme conditions🛡️ Stainless Steel Gears (316/304) – Ultra-tough, corrosion-resistant drivetrain✅ 100% Satisfaction Guarantee + 12-Month No-Hassle Warranty 📦 What’s in the Box? ✔️ (1) Nitro Pro FK-N500PRO2 Gen 2 Brushless Servo✔️ Peace of mind with industry-leading warranty and support 🚗 Built to Win – Trusted by Racers Speed, strength, and confidence — the FK-N500PRO2 gives you the edge when it matters most. Whether it’s fine control or full-send action, this servo’s got you covered. 💡 Upgrade Your Setup – Add the Nitro Pro FK-N500PRO2 to Your Build Today!

Read more less