The Team Associated B6 Front Hinge Pin Brace is a genuine replacement part designed to restore strength and alignment to the front suspension of your RC10 platform. Precision-molded for a direct factory fit, this brace securely holds the front hinge pins in place, helping maintain consistent suspension geometry and reliable handling. Ideal for maintenance, rebuilds, or replacing damaged components after hard racing or bashing, this hinge pin brace installs easily and keeps your front end tight and predictable. Features: Genuine Team Associated replacement part Maintains proper front suspension alignment Durable construction for racing and off-road use Direct drop-in fit with no modifications required Includes: (1) Front Hinge Pin Brace Compatibility: Team Associated RC10B6 Team Associated RC10B6D Team Associated RC10B6.1 Team Associated RC10B6.1 Factory Lite Team Associated RC10B6.1D Team Associated RC10B6.2 Team Associated RC10B6.2D Team Associated RC10B6.3 Team Associated RC10B6.3D Team Associated RC10B6.4 Team Associated RC10B6.4D Team Associated RC10 SC6.1 Team Associated RC10 T6.1

Read more less

The Team Losi Racing TLR-1194 Front Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens front sway bar set allows drivers to fine-tune front roll stiffness, helping balance steering response, corner entry feel, and overall chassis control for changing track conditions. A simple, effective tuning tool that works without altering springs or shock setup. 🔧 Features Genuine Team Losi Racing tuning option Front sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Enables fine adjustment of front chassis roll and steering feel Ideal for adapting to different grip levels and layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Front Sway Bars Set ✅ Compatibility Losi 22X  Losi 22X-T

Read more less

The Team Losi Racing TLR-1212 Rear Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens sway bar set allows drivers to fine-tune rear roll stiffness to better suit track grip levels, driving style, and layout demands. A simple and effective way to adjust handling balance without changing springs or shock settings. 🔧 Features Genuine Team Losi Racing tuning option Rear sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Allows fine adjustment of chassis roll and cornering response Ideal for adapting to changing track conditions ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Rear Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

Upgrade your suspension precision with the AVID 13mm Ringer Shock Collar Kit, engineered to let you run 13mm springs on multiple shock platforms including Team Associated 13mm, TLR G3/3.5, and Schumacher LD3/L1R. Crafted for racers who demand accuracy and consistency, these collars feature offset laser-etched AVID logos that allow you to match spring tension left-to-right in clean ¼-turn increments. Machined with AVID’s signature silver ringer highlight, these collars not only perform—they look pro doing it. Features Compatible with 13mm springs across popular racing platforms Fits: AE 13mm, TLR G3/3.5, Schumacher LD3/L1R shock bodies Offset laser-etched AVID logos for easy visual alignment Allows perfect ¼-turn spring tension adjustments Internal o-ring design keeps collars firmly in place Signature silver ringer machining for premium finish Works great with AE V3, XRAY, and 1UP 13mm springs Tips Spring cups are not included.Recommended options:• AE 13mm Spring Cups – ASC91966• AE 12mm Spring Cups – ASC91814 (compatible with some setups) Includes (4) AVID 13mm Shock Collars (4) Internal O-Rings (pre-installed)  

Read more less

The 1RC Racing 1/18 Servo Extension Wire is a direct replacement part designed for the 1RC Racing 1/18 chassis lineup. Perfect for extending servo reach or cleanly routing wires through your setup, this high-quality extension ensures a secure, low-resistance connection between components. ⚙️ Features: Genuine 1RC Racing replacement part 100mm length for flexible installation Durable, high-quality wire construction for reliable signal transfer Ideal for clean wire management on your 1/18 scale setup 📦 Includes: (1) 1RC Racing 1/18 Servo Extension Wire (100mm)  

Read more less

The Reedy Sonic 540-FT 13.5T Competition Brushless Motor delivers professional-level performance at an affordable price. Designed for spec racing, clubs, and racing series where equalized performance is key, this ROAR-approved motor combines precision engineering with durability and ease of maintenance. Featuring a lightweight CNC-machined can, high-strength balanced rotor, and dual ball bearings for smooth operation, the 540-FT offers exceptional value without compromising performance. Its fixed 45-degree timing ensures consistent power delivery and reliability for all racers. ⚙️ Features: CNC-machined lightweight aluminum can for superior cooling and precision High-strength balanced rotor for smooth, efficient operation Dual precision ball bearings for long-lasting performance Fixed 45° timing for consistency and spec-class fairness Easy-to-solder tabs for clean wiring and quick installation Fully rebuildable design for extended motor life ROAR approved for sanctioned competition use 📏 Specifications: Turns: 13.5T Timing: Fixed (45°) Input Voltage: 1–2S LiPo Diameter: 35.8 mm Length: 51.8 mm Shaft Diameter: 3.15 mm Weight: 175 g 📦 Includes: (1) Reedy Sonic 540-FT 13.5T Fixed Timing Brushless Motor 💡 Pro Tip:Pair the Sonic 540-FT with a Reedy Blackbox 600Z ESC and Reedy LiPo 2S Shorty Pack for a smooth, balanced, and race-ready setup right out of the box.  

Read more less

Avid Oiler Pen | Empty [AV10135] Product Overview: The Avid Empty Oiler Pen gives you full control over your lubrication needs. Originally used for Avid Slip oil, this handy tool now comes empty—ready to be filled with your favorite lubricant. It features a precision 1" (25.4mm) long steel tip for clean and accurate application and holds up to 1/4oz (7.4cc) of fluid. A perfect companion for any RC tool kit or pit box. Features: Comes empty – fill with your preferred lubricant Precision 1" steel tip for controlled application Holds up to 1/4oz (7.4cc) of fluid Compact, pit-friendly size Includes: (1) Empty Avid Oiler Pen Part Number: AV-OIL-PEN

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Secure your batteries with confidence using the XRAY Composite LiPo Battery Holder – Long. Precision-molded from premium XRAY composite, these holders are lightweight yet durable, ensuring a snug fit and reliable hold during even the most aggressive racing. The long version is designed for extended-size LiPo packs, offering proper alignment and security in your chassis layout. Features: Includes 2 front & 2 rear holders Long design for extended-size LiPo battery packs Molded from high-quality XRAY composite material Keeps batteries secure under high loads and impacts Lightweight and easy to install Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, long battery layout) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, long battery layout) XRAY XB4 – 1/10 4WD Buggy (check manual for pack fitment) Part Number: 326176-L      

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Fine-tune your steering geometry with XRAY’s precision-machined Graphite Steering Block Extension Plates. Available in 1-dot, 2-dot, and 3-dot options, these lightweight graphite plates let you adjust steering response and handling characteristics to match your track and driving style. Features: Made from high-quality graphite for strength and precision Adjusts steering geometry for optimal handling Lightweight, durable construction Direct fit for XB2 & XT2 platforms Includes 2 extension plates per set Dot Options (choose your setup): 1-Dot (322294): Minimal extension – smooth, stable steering 2-Dot (322295): Balanced setting – great all-around response 3-Dot (322296): Maximum extension – aggressive steering feel Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (2) Graphite Steering Block Extension Plates (select 1-dot, 2-dot, or 3-dot version)

Read more less

The XRAY 5mm Open Ball Joints are precision-molded composite parts designed for smooth operation and long-lasting durability. Their open design allows for easier assembly and disassembly while reducing friction and play in the steering and suspension system. Built to XRAY’s exacting standards, these ball joints deliver consistent performance for high-level racing. Features: High-quality composite construction for strength and durability Open design for quick installation and maintenance Provides precise steering and suspension movement Optimized for reduced friction and slop Includes:(8) 5mm Open Ball Joints Compatibility: XRAY T2 series May also be used in other XRAY platforms requiring 5mm open ball joints

Read more less

The XRAY XB2 Differential Gasket Set includes four precision-cut gaskets designed for use in the XB2 gear differential. These gaskets provide a tight, consistent seal to prevent oil leakage and ensure smooth, reliable diff performance. Perfect for rebuilds or routine maintenance, they help extend the life of your differential while maintaining peak performance. Features: Precision-cut gaskets for perfect sealing Prevents oil leaks and maintains smooth diff action Durable material for long-lasting reliability Essential for rebuilds and maintenance Designed for XRAY XB2 vehicles Includes:(4) Differential Gaskets    

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 13mm Rear Shock Spring (Green/2.20lbs) (72mm) [71163]🌿 Smooth rides, soft landings!Upgrade your T6.2 or SC6.2 with the 13mm Rear Shock Springs in Green (2.20 lbs/in). These 72mm springs are tuned for plush low-speed movement and firm high-speed impact absorption — ideal for maintaining grip while taming big jumps.💥 Features:✅ Green rate: 2.20 lbs/in✅ Length: 72mm✅ Engineered for 13mm shocks✅ Perfect balance of cushion and control✅ Includes 2 springs📦 Part Number: 71163🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring (White/4.40lbs) (54mm) [71160]🛠️ Tuned for precision. Built for performance.Upgrade your T6.2 or SC6.2 with these 13mm Front Shock Springs and feel the difference! Rated at 4.40 lbs/in and measuring 54mm, these white springs deliver buttery-smooth handling with serious jump support. Soft in the corners, firm on impact—just how you want it.💥 Features:✅ White rate: 4.40 lbs/in✅ Length: 54mm✅ Designed for 13mm shocks✅ Optimized for balance between grip and control✅ Includes 2 springs📦 Part Number: 71160🏁 Brand: Team Associated

Read more less

🔧⚙️ Precision Suspension Tuning Starts Here The ProTek RC Aluminum Ball Stud Washer Set is a must-have upgrade for racers looking to fine-tune their suspension geometry. Made from durable black anodized aluminum, these precision-machined washers won't compress or deform like plastic spacers, providing consistent ball stud height for accurate suspension setup. With three different thicknesses included, you'll have the flexibility to make precise roll center, steering, and wheelbase adjustments. 🔧 About the Aluminum Ball Stud Washer Set ⚙️ Precision Suspension Adjustments These washers allow you to accurately adjust ball stud height, making it easier to fine-tune suspension geometry for improved handling and performance. Common uses include: Roll center adjustments Steering geometry tuning Wheelbase adjustments Link height spacing 💪 Durable Aluminum Construction Unlike plastic spacers, these black anodized aluminum washers resist flattening and deformation, helping maintain consistent suspension settings even under heavy loads. 🏁 Multiple Thicknesses Included Three washer thicknesses provide a variety of tuning options, allowing quick setup changes for different track conditions. 🔧 Features ✔ Precision-machined aluminum construction✔ Black anodized finish✔ Won't flatten or deform like plastic spacers✔ Fits both 4-40 and M3 ball studs✔ Ideal for suspension geometry adjustments✔ Three washer thicknesses included✔ Great for racers and performance tuning 📦 Includes (4) 3 x 5.5 x 0.5mm Aluminum Washers (4) 3 x 5.5 x 1.0mm Aluminum Washers (4) 3 x 5.5 x 2.0mm Aluminum Washers Total: 12 Washers 📊 Specifications Specification Details Material Aluminum Finish Black Anodized Inside Diameter 3mm Outside Diameter 5.5mm Thicknesses Included 0.5mm, 1.0mm, 2.0mm Quantity 12 Washers 🚗 Compatibility Compatible with: RC vehicles using 4-40 ball studs RC vehicles using M3 ball studs Ideal for most on-road and off-road vehicles that utilize adjustable ball stud suspension geometry. ⚠️ Notes Precision tuning washers designed for suspension geometry adjustments. Compatible with both 4-40 and M3 ball studs. Black anodized finish provides excellent durability and corrosion resistance. • • Also available in Blue Anodized (ProTek RC PTK-8371).

Read more less

🏁⚡ Reliable High-Current Electrical Connections The ProTek RC 4mm Serrated Male Bullet Connectors are high-quality connectors designed to provide secure, low-resistance electrical connections for a variety of RC applications. Ideal for batteries, motors, and electronic speed controllers, these serrated bullet connectors ensure excellent contact and dependable power transfer. Whether you're building custom battery packs or replacing worn connectors, these ProTek bullets offer the performance and reliability serious RC enthusiasts demand. 🏁 About the 4mm Serrated Bullet Connectors ⚡ Efficient Power Transfer Precision-machined 4mm bullet connectors provide a secure fit and low-resistance connection to maximize electrical efficiency. 🔒 Serrated Design The serrated surface improves contact pressure for a reliable connection that resists vibration and helps maintain consistent power delivery. 🔧 Versatile Applications Perfect for a wide range of RC wiring projects, including: Battery connectors Motor-to-ESC connections Custom wiring setups High-current electrical applications 🔧 Features ✔ High-quality 4mm male bullet connectors✔ Serrated design for improved electrical contact✔ Low-resistance power transfer✔ Ideal for high-current RC applications✔ Great for battery and motor wiring✔ Includes heat shrink tubing for a clean installation 📦 Includes (3) 4mm Serrated Male Bullet Connectors Heat Shrink Tubing 📊 Specifications Specification Details Connector Size 4mm Connector Type Male Design Serrated ⚠️ Notes Suitable for a variety of RC electrical applications. Professional soldering is recommended for the best connection and performance. Package contents include three (3) male bullet connectors, despite some product titles listing two.

Read more less

Hinge Pin Brace Overview:This is a replacement front hinge pin brace designed for Team Associated RC10 platforms. It helps secure the hinge pins and maintain proper suspension alignment. 🔧 Key Features ✔ Replacement front hinge pin brace✔ Helps maintain suspension alignment✔ Supports chassis rigidity✔ Direct fit design 📦 Includes (1) Front Hinge Pin Brace 🚗 Compatibility Team Associated RC10 B7.1 Team Associated RC10 B7.1D Team Associated RC10 SC7 Team Associated RC10 T7 Ideal for replacing worn or damaged components, this brace helps keep your suspension secure and performing consistently.  

Read more less

Bring strength, precision, and serious style to your TLR 22X-T with the Avid Ringer Titanium Turnbuckle Set. This is Avid’s first entry into the turnbuckle market — and they didn’t hold back. Finished in a sleek gloss black with bright silver Ringer grooves and directional A-Arrows, these turnbuckles don’t just perform… they stand out. 💎 Premium Titanium Performance Machined from billet 6Al-4V Titanium and featuring cold-rolled threads, these 3.5mm turnbuckles are built for strength and long-term durability. After extensive testing, Avid reports zero failures on this version — and they back it with their well-known replacement guarantee. 🔄 Built-In Directional Adjustment Each turnbuckle features: Machined A-Arrow direction indicators Logo engraved on all four sides (won’t wear off) A bulky 4mm adjustment center for easy wrench access Turn the A-Arrow forward to tighten — no guessing at the track. ✨ Signature Ringer Design The trademark round “Ringer” grooves reflect more light than traditional flat-cut designs, giving your build a premium, high-contrast look that literally outshines the competition. Yes, they cost more — but the machining process (black finish, silver rings, silver arrows) takes extra steps, and the result is a truly unique piece of race hardware. ✅ Features Machined from billet 6Al-4V Titanium Cold-rolled threads for strength Shiny black finish (4) Bright silver Ringer grooves (4) Machined A-Arrow direction indicators 4mm adjustment center Backed by Avid replacement guarantee 🔧 Fitment TLR 22X-T If you're building a clean 22X-T and want both performance and premium detail — these are the turnbuckles that separate your ride from the rest.  

Read more less

Upgrade your TLR 22X with the Aluminum Wide Steering Spindles (8°), designed for racers who demand sharper steering precision, increased durability, and consistent performance under race conditions. These wide spindles enhance front-end geometry while maintaining lightweight responsiveness for competitive 2WD racing. Precision CNC machined from high-strength 7075 aluminum, these spindles provide superior strength and impact resistance compared to stock components. The black anodized finish with chamfered edges adds corrosion protection and a clean, factory race look. Features 8° wide steering spindle configuration CNC machined for precise fitment Constructed from high-strength 7075 aluminum Black anodized for durability and corrosion resistance Chamfered edges for a clean finish Improves steering precision and stability Lightweight yet highly durable design Direct upgrade for high-performance racing setups Includes (2) Aluminum Wide Steering Spindles (Black, 8°) ⚠️ Note: TLR-1187 Delrin Spindle Bushings are required for installation. A premium steering upgrade that enhances durability, precision, and confidence on the track. 🏁    

Read more less

The R1WURKS Ultra-Lightweight Titanium HD CVA Bones (X67mm) are engineered for racers chasing maximum efficiency and response in stock classes. Crafted from specially treated Ti 6Al-4V Grade 5 Titanium, these are the lightest CVA bones R1WURKS has produced, dramatically reducing rotational inertia for faster acceleration and sharper braking. Optimized for 21.5–17.5 stock racing, these bones deliver improved power transfer, better cornering agility, and a noticeable reduction in overall drivetrain mass—giving stock racers a real competitive edge. Key Benefits Faster acceleration and deceleration Improved braking response Increased power transfer efficiency Better agility and responsiveness in corners Reduced rotational inertia and overall vehicle weight Features & Specifications Ultra-lightweight: 5.96g per pair Approximately 40% lighter than standard steel bones Precision Swiss-style machining with ultra-tight tolerances Made from treated Ti 6Al-4V Grade 5 Titanium Laser-etched logos and identification markings Designed specifically for stock racing performance Includes (2) Titanium HD CVA Bones Replaces TLR232138 Fitment TLR 22X TLR 22 5.0 A no-compromise drivetrain upgrade built for stock racers who want quicker response, lighter rotating mass, and sharper on-track performance. 🏁

Read more less

Rolling freely is critical for race-day performance, and the JConcepts Radial NMB Bearing Set is built to meet the demands of elite competition. This complete kit uses NMB stainless steel bearings manufactured to exacting tolerances, delivering smooth rotation, durability, and long service life under hard racing conditions. Designed as a direct-fit replacement, this set restores efficiency, reduces drivetrain drag, and helps keep lap times consistent from the first heat to the mains. Features & Benefits: High-quality NMB stainless steel bearings Precision tolerances for smooth, efficient rotation Durable construction for long-lasting performance Reduces friction and improves drivetrain efficiency Designed for the rigors of competitive racing Compatibility (Direct Fit): Team Associated B6.4 Team Associated B6.4D Team Associated T6.4 Team Associated SC6.4 Includes: Complete radial bearing set for supported models A must-have upgrade or refresh for racers looking to keep their Associated platform rolling smooth and fast.

Read more less

Upgrade strength and precision at the shock tower with the Vision Racing (VR) Titanium Upper Shock Mounts for the TLR 22X and 22X-T platforms. Designed to handle the demands of competitive racing, these mounts improve durability while keeping weight to a minimum. Machined from Grade 5 Ti-6Al-4V titanium, these standoffs offer exceptional strength, corrosion resistance, and long-term reliability. Integrated Delrin bushings help reduce wear and promote smooth shock movement for consistent suspension performance. Features & Benefits: Precision-machined Grade 5 Ti-6Al-4V titanium Lightweight with exceptional strength and durability Integrated Delrin bushings for smooth operation and reduced wear Improves shock mounting reliability under hard use Clean, race-focused design Compatibility: TLR 22X TLR 22X-T 1/10 scale platforms Includes: (2) Titanium upper shock mount standoffs Delrin bushings A premium hardware upgrade for racers looking to increase durability and consistency without adding unnecessary weight.      

Read more less

Upgrade your Team Associated RC10B7/B7D with the ultimate lightweight hardware package! The JConcepts Titanium Lower Screw Set is engineered for racers who want maximum strength, precision, and performance. With high-grade titanium construction and brilliant anodized finishes in Blue or Black, this set delivers both style and serious on-track advantages. Each screw is machined to exact tolerances, offering exceptional durability and smoother wrench feel. The low-head FHCS profile keeps weight low and sleek, while the titanium build cuts unnecessary mass from the lower portion of the chassis—improving handling, balance, and acceleration. Every screw is packed in a labeled bag identifying its location on the vehicle, making installation simple and organized. ⭐ Features Premium high-grade titanium construction Reduces overall vehicle weight for improved performance Low-head FHCS design for a clean fit Available in Blue or Black anodized finishes 3mm thread base compatible with RC10B7/B7D platforms Labeled bags for each area of the vehicle for easy installation Increased strength, durability, and long-term reliability 📦 Includes (28) Titanium screws in various sizes Individually labeled bags for chassis locations ⚙️ Compatibility Team Associated RC10B7 Team Associated RC10B7D

Read more less

Precision Fit. Factory Strength. Keep your XRAY buggy performing flawlessly with the Composite 3G Gear Box Housing, designed specifically for the XB2C and XB2D 2025 platforms. Manufactured with XRAY’s world-class precision and composite technology, this gearbox housing delivers the perfect balance of strength, light weight, and durability for top-level competition. Race-Proven Design Engineered for optimal drivetrain alignment and smooth power delivery, this factory replacement housing ensures your XB2 transmission runs reliably and efficiently. Ideal for racers looking to maintain peak performance, it’s built to handle high torque and intense track conditions without flex or wear. Features: Genuine XRAY factory replacement part Durable composite construction for lightweight strength Ensures precise gear mesh and smooth drivetrain operation Designed for maximum performance and reliability Direct fit for XB2C & XB2D 2025 models Includes: (1) Composite 3G Gear Box Housing Compatibility: XRAY XB2C 2025 XRAY XB2D 2025 XRAY — The Art of Performance.

Read more less

Precision Performance. Lab-Calibrated Consistency. Keep your shocks performing at their peak with HUDY Ultimate Silicone Oil 400 cSt, the trusted choice of top racers worldwide. Manufactured in Europe by HUDY’s premium silicone specialists, this oil is laboratory tested and calibrated to deliver unmatched consistency, batch after batch. Whether you’re tuning for off-road stability or on-road precision, HUDY’s 400 cSt oil provides the perfect balance of damping and responsiveness for smooth, predictable handling. Race-Ready Quality HUDY oils use the industry-standard cSt rating for easy identification and setup changes. The 400 cSt blend sits in the light-to-medium viscosity range, making it ideal for shock applications where precise damping is key. Each oil type is color-coded for instant recognition and faster pit work. Features: Premium-grade silicone oil manufactured in Europe Lab-tested for precision and batch consistency 400 cSt viscosity — perfect for shock tuning cSt-rated for easy setup adjustments Color-coded labeling for quick identification Trusted by professional racers worldwide Specifications: Viscosity: 400 cSt Volume: 100 ml bottle Product Code: 106341 HUDY Ultimate Oils — Consistency You Can Feel.    

Read more less

Heavy-duty charge lead for Junsi iCharger 456DUO and other XT90-input chargers Overview:The ProTek RC 2S High Current Charge/Balance Adapter is built for racers who demand maximum efficiency and reliability when charging at high amperage. Designed specifically for Junsi iCharger 456DUO users—and ideal for any charger using XT90 inputs—this cable delivers ultra-low resistance and premium performance for modern high-power LiPo packs. About the High Current Charge/Balance Adapter Built for Serious Power HandlingThis adapter features gold-plated 5 mm bullets for secure, low-loss battery connection and a female XT90 connector for the charger side, ensuring stable current transfer even during extreme charge or discharge cycles. The 10 AWG high-strand wire provides the heavy-duty conductivity needed for charging at higher-than-average amp rates without voltage drop or excess heat. Clean, Tangle-Free DesignThe 24-inch coiled jacket keeps your pit area organized and the cable flexible, while reducing tangling during setup or transport. A 7-pin XH balance connector provides easy balancing for 2S and higher cell count packs—making this a truly versatile, professional-grade charging lead. Features: Designed for Junsi iCharger 456DUO and other XT90-input chargers 5 mm gold-plated bullets for secure battery connection 10 AWG high-strand wire handles extreme current demands Female XT90 connector ensures solid charger connection 7-pin XH balance plug supports up to 6S balancing 24" (61 cm) coiled jacket for flexibility and a tangle-free workspace Low resistance design for maximum charge performance Specifications: Specification Details Wire Gauge 10 AWG Length 24" (61 cm) Charger Connector Female XT90 Battery Connector 5 mm Gold-Plated Bullets Balance Connector 7-Pin XH (Up to 6S) Compatibility Junsi iCharger 456DUO / 458DUO, XT90-input chargers Includes: (1) 2S High Current Charge/Balance Adapter Cable

Read more less

Compatible with iCharger 456DUO, 458DUO, and iSDT Chargers Overview:The TQ Wire XT90 2S Charge Cable is built to handle high-power charging applications with maximum efficiency and reliability. Designed specifically for use with Junsi iCharger 456DUO and 458DUO, this premium cable provides a secure connection between your charger and LiPo batteries equipped with 4mm or 5mm bullet connectors. About the XT90 2S Charge Cable Heavy-Duty Design for High Power ChargingFeaturing an XT90 connector for the charger side and stepped 4mm/5mm bullets for the battery side, this cable is ideal for high-current setups where performance and safety are critical. The stepped bullet design ensures wide compatibility with various LiPo battery packs while maintaining a tight, low-resistance connection. Built from 12-gauge high-strand wire, the cable provides excellent current flow and flexibility. The length of 2 feet (610mm) offers convenience for bench setups without cluttering your workspace. Wrapped in durable black nylon mesh, it’s both tough and clean-looking—ready for the pits or workshop. Features: XT90 connector for secure charger connection 4mm & 5mm stepped bullets for wide battery compatibility Designed for Junsi iCharger 456DUO and 458DUO 12 AWG high-strand wire for maximum current efficiency 2-foot length for optimal reach and organization Durable black nylon mesh wrap for protection and aesthetics Plug-and-play reliability for professional or hobby use Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT90 Battery Connectors 4mm & 5mm Stepped Bullets Compatibility iCharger 456DUO, 458DUO, iSDT, and XT90-equipped chargers Includes: (1) XT90 2S Charge Cable with 4mm & 5mm Bullet Connectors

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

Take your drivetrain performance to the next level with the XRAY Composite 3G Gear Box (Graphite). Designed to work with the chassis brace, this lightweight yet ultra-strong graphite-reinforced set delivers maximum durability and precision fitment. Perfect for racers who demand reliability and performance lap after lap. Features: High-strength graphite composite material Optimized 3rd generation (3G) design for improved stiffness and efficiency Works with the chassis brace system for enhanced stability Lightweight construction without sacrificing strength Precision-molded for a perfect XRAY factory fit Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 3G gearbox with chassis brace Includes: Complete Composite 3G Gear Box (Graphite) Set

Read more less

Upgrade your ride with these precision-engineered 55mm Adjustable Turnbuckles, crafted from world-renowned HUDY Spring Steel™ for unmatched strength and durability. Featuring M3 left- and right-hand threads, they allow for easy and precise suspension and steering adjustments without removing them from the car. Features: Premium HUDY Spring Steel™ for maximum lifespan and toughness 55mm length – ideal fit for multiple XB2/XT2 suspension applications M3 left & right threads for fast, fine adjustments Black coating for wear resistance and a pro finish Includes two turnbuckles Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 55mm M3 turnbuckles Includes: (2) 55mm Adjustable Turnbuckles

Read more less

Upgrade your steering precision with the XRAY Composite Servo Shim Set. Designed to perfectly space and align your servo, these durable composite shims help reduce stress on linkages and ensure smooth, consistent steering response. Features: Set includes 4 composite servo shims Provides proper servo height and alignment Reduces wear on steering components Lightweight yet durable composite material Easy direct installation Compatibility: Fits all XRAY 1/10 and 1/8 platforms where servo spacing adjustments are required  

Read more less