HackFab Losi Mini-B Bolt-On Sprint Car Cage (Black) – HFB02046BK Convert your Losi Mini-B into a full-fledged sprint car with the HackFab Bolt-On Sprint Car Cage. Designed for easy installation, this cage bolts directly to your stock aluminum chassis and pairs perfectly with the HackFab Sprint Car Lexan Body Kit (HFB02045 – sold separately). Featuring a unique hinge system for quick access and durable 3D-printed mounts, this kit is built for racers who want authentic style and easy maintenance. Features: Direct bolt-on fit for Losi Mini-B aluminum chassis Designed to work with HackFab Sprint Car Lexan Body (HFB02045) Innovative hinge system for quick access to internals Includes durable 3D printed mounts Includes: (1) Sprint Car Cage Kit (1) 1" Body Post All necessary mounting hardware

Read more less

HackFab Losi Mini-B Bolt-On Sprint Car Lexan Body Kit (Clear) – HFB02046BK Upgrade your Losi Mini-B into a dirt oval contender with the HackFab Sprint Car Lexan Body Kit. This pre-trimmed, clear Lexan body is designed to bolt directly onto the HackFab Sprint Car Cage (HFB02046BK - sold separately), eliminating the hassle of custom cutting and bending. It's lightweight, high-quality, and ready for your custom paint job! Features: Designed specifically for Losi Mini-B with HackFab Sprint Car cage High-quality clear Lexan Pre-trimmed, bent, and ready to assemble Includes lightweight composite mounting hardware Includes: (1) Clear Lexan body (pre-trimmed and bent) Mounting hardware Notes: Headers (HFB02044M) not included Painted body shown for reference only – yours will arrive clear and unpainted

Read more less

Add substantial low-mounted weight while strengthening your HackFab oval conversion with the HackFab Brass Chassis Stiffening Plate System V2.2. Designed for HackFab-converted Losi Mini-T 2.0 and Mini-B platforms, this system uses separate front and rear brass plates to reinforce the chassis and provide an additional weight-tuning option. The brass version weighs nearly 3.5 times as much as the aluminum version, making it particularly useful when you're looking to add weight as low as possible in the chassis. ⚡ Features: V2.2 brass chassis stiffening system Made from 1.6mm brass Nearly 3.5x the weight of the aluminum version Adds valuable low-mounted chassis weight Helps reduce chassis flex Reinforces both the front and rear of the chassis Drops the main chassis 1.6mm Helps lower the vehicle's center of gravity Plates are shaped to match the chassis Includes longer mounting hardware for installation Designed as a weight and chassis-flex tuning option for oval racing 📦 Includes: (1) Brass Front Stiffening Plate (1) Brass Rear Stiffening Plate Mounting Hardware 📏 Specifications: Manufacturer: HackFab HobbiesPart Number: HFB02021Version: V2.2Material: BrassPlate Thickness: 1.6mmPosition: Front & Rear 🔧 Compatibility: ✅ Losi Mini-T 2.0 with compatible HackFab conversion chassis✅ Losi Mini-B with compatible HackFab conversion chassis ⚠️ Fitment Note: HackFab has produced multiple versions of its chassis conversions and stiffening plates. Make sure your HackFab chassis matches the V2.2 plate system before ordering. 💡 Pro Tip: The big advantage of the brass version isn't simply chassis stiffness—it's weight placement. Nearly 3.5 times heavier than HackFab's aluminum version, it lets racers add substantial weight directly at the bottom of the chassis while simultaneously lowering the main chassis 1.6mm.  

Read more less

Fine-tune the ride height and suspension travel of your Losi Mini-T 2.0 or Mini-B with the HackFab Internal Shock Spacer Limiter Kit. These 3D-printed internal shock spacers install on the shock shafts to reduce available shock travel, allowing racers to lower the chassis and dial in suspension movement for different track conditions. They're especially useful for oval and on-road racing, where the large amount of suspension up-travel provided by the stock setup may not be needed. ⚡ Features: Designed for the Losi Mini-T 2.0 and Mini-B Internal shock limiters reduce available shock travel Allows precise ride-height and suspension-travel tuning Includes 1mm through 5mm spacer sizes Spacers can be combined to achieve additional limiting amounts Color-coded by size for quick identification Excellent for oval and on-road setups Helps lower the chassis for reduced ride height 3D-printed construction 40-piece complete tuning kit 📦 Includes: (8) 1mm Shock Limiters (8) 2mm Shock Limiters (8) 3mm Shock Limiters (8) 4mm Shock Limiters (8) 5mm Shock Limiters 40 Total Spacers 🔧 Compatibility: ✅ Losi Mini-T 2.0✅ Losi Mini-B✅ May fit other vehicles using a similar shock-shaft diameter 🏁 Oval & On-Road Setup Tip: HackFab recommends approximately 6mm of internal spacing as a starting point for oval and road racing. Around 6mm of limiting can allow the rear suspension arms to sit approximately level with the ground, providing a useful baseline for further chassis tuning. ⚠️ Installation Note: Because these spacers are 3D printed, small pieces of excess printing material may occasionally remain. Inspect and clean each spacer before installation to ensure smooth operation inside the shock. 💡 Pro Tip: Don't think of these as just ride-height spacers. Changing internal limiting also changes how much the suspension can extend, making it a useful setup tool for controlling chassis movement in high-grip oval and on-road applications.  

Read more less

 ⚙️ Stay Organized. Protect Your Gears. Race Ready. Keep your pinion collection organized and easily accessible with the HackFab Mini Carbon Fiber Pinion Caddy. Designed specifically for 2mm bore pinion gears commonly used on the Losi Mini-B and Mini-T platforms, this lightweight carbon fiber caddy is the perfect addition to any pit box or race bag. Whether you're tuning gearing for different track conditions or simply keeping spare pinions organized, this caddy helps prevent lost parts and keeps your setup professional and race-ready. ⚡ Features: ⚙️ Designed for 2mm bore pinion gears🏁 Perfect for Losi Mini-B and Mini-T applications💪 Lightweight and durable carbon fiber construction🔧 Organizes and stores multiple pinion gears neatly🧰 Great for pit boxes, race bags, and workbenches🚀 Helps simplify gearing changes at the track✨ Professional appearance with premium carbon fiber finish 📦 Includes: (1) HackFab Mini Carbon Fiber Pinion Caddy 📏 Specifications: Part Number: HFB03010Material: Carbon FiberPinion Bore Compatibility: 2mm 🔧 Compatibility: Losi Mini-BLosi Mini-TMost 2mm bore pinion gears 💡 Pro Tip: Track conditions change throughout race day. Keeping multiple pinion sizes organized in a dedicated caddy makes gearing adjustments faster and helps prevent losing those tiny pinions in your toolbox or pit area. 🏁🔧

Read more less