The Hobbywing QuicRun Fusion FOC 2300Kv 2-in-1 ESC & Motor System is a unique ground-up design, packed with technology specific for scale trucks and rock crawlers. Features: Integrated design of Hobbywing's patent technology: The integrated design of the ESC makes the size similar to a 540 motor, and the overall weight is only 209g. This makes the layout and wiring of the car simpler, while creating a cleaner overall chassis that also leaves more room for an interior.  Intelligent Torque Output & Speed Closed-loop Control for Easy Control: The Fusion system combined with Intelligent Torque output and closed-loop speed control means the power system will maintain the motor’s Torque level and RPM as the vehicle conditions change. Uphill, downhill, under load, the intelligent output torque makes the operation more consistent. Note: If the “RPM/Throttle Matching” is set to “Disabled”, no intelligent torque output & speed closed-loop control, just like the brushed system. FOC (Field-oriented Control) for Super Linearity & HighTorque & Extreme Mute: The Fusion system adopts FOC driving mode so low speed torque is strong, and it runs smoothly at very low speed. Moreover, the motor is extremely silent when it is running. The driving noise which annoys the driver disappears. It is the best choice for a scale rock crawler. Waterproof: Applicable to All Weather & Track Conditions: The IP-67 waterproof system has excellent waterproof and dustproof performance. You can easily drive in the mud, sand, ice, snow and water. High Driving Efficiency for Long Battery Life: FOC offers high efficiency and reduced heat, dramatically extending runtime. Benefitting from a sine wave driving mode, the motor runs silently and softly. Professional Drag Brake Adjustments & Super Parking Capacity: 8 levels of drag brake force and 9 settings of drag brake rate allow a high level of tuning for different conditions and driver preference. The maximum drag brake force is about twice that of an ordinary brushless system of the same size, providing super strong parking capacity on a steep slope. Advanced and Secure Electronic Switch: Compared to standard on/off switches, the dust, dirt, and waterproof electronic switch housing ensures a long reliable life for your power system, and will not suffer from the problems that will damage a mechanical switch.  Specifications: Motor Kv: 2300Kv Continuous Current: 60AShaft Diameter: 3.175mm Peak Current: 200A Input Voltage: 2-3S LiPo/6-9 Cell NiMH BEC Output: 6V/7.4V adjustable, 4A continuous (switch mode) Input Wires: 14awg, 330mm long Input Connectors: XT60 (factory installed) Port Programming: Independent programing interface (switch position) Size: 37x58mm Weight: 209g w/wires Includes: (1) FOC motor w/ built-in ESC & Factory installed XT60 plug

Read more less

Unleash extreme torque with the Titan 550 Reverse Rotation Motor from Traxxas — the ultimate upgrade for your TRX-4. This 21-turn powerhouse features a 30% longer armature than standard 540 motors, delivering monster torque and rugged trail performance. Built with an integrated fan for cooler running and longer motor life, this motor is ready to crawl, climb, and conquer. 🔥 21-turn / 14.4V Reverse Rotation🔥 550-size can for maximum torque🔥 30% longer armature = more power🔥 Integrated cooling fan for extended durability Compatible with: Traxxas TRX-4 Traxxas models requiring reverse rotation 550 motors Part #: 3975R Built to handle the toughest trails — torque, traction, and temperature under control. This is Titan power.  

Read more less

Give your rig a serious steering upgrade with the Traxxas 2265 High-Torque Metal-Gear Sub-Micro Servo. Producing 75 oz-in of torque, this servo delivers twice the torque of conventional sub-micro servos for stronger, more precise control. A metal-gear drivetrain and aluminum center section provide outstanding durability and improved heat dissipation, all in a fully waterproof design. Features: 75 oz-in of torque (high-torque performance) Fully waterproof construction Metal-gear drivetrain for durability Aluminum center section for improved heat dissipation Smooth, precise steering response Drop-in installation with no modifications required Fits: Traxxas TRX-4M® (direct drop-in upgrade) LaTrax® models Works as a shift servo on Traxxas TRX-4® and TRX-6® models Part Number: 2265 Perfect for crawlers and trail rigs that demand more torque, reliability, and waterproof performance.

Read more less

Take control from a distance with the Traxxas Wireless Winch Remote, designed for effortless operation of multiple Traxxas accessories. Whether you're pulling a buddy out of trouble on the trail or counting down to a drag strip launch, this compact controller gives you the power right in your hand. Compatible with both the Traxxas Pro Scale Winch (8855) and the Traxxas Drag Race Start Light (6595), this remote adds convenience, versatility, and a professional feel to your RC experience. Features: ✔️ Works with the Traxxas Pro Scale Winch (8855)✔️ Controls the Traxxas Drag Race Start Light (6595)✔️ Wireless operation for easy, handheld control✔️ Dual-purpose functionality for crawling and drag racing✔️ Simple, intuitive button layout Includes: (1) Traxxas Wireless Winch Remote

Read more less

Simplify your crawler build while gaining incredible control with the Hobbywing QuicRun Fusion SE FOC 2-in-1 System. This integrated ESC and brushless motor combo delivers ultra-smooth throttle response, strong low-speed torque, and a compact installation perfect for modern scale crawlers and trail trucks. Powered by FOC (Field-Oriented Control) technology, the Fusion SE offers unmatched smoothness and precision when navigating technical terrain. 🧗 Built for Crawling Performance The Fusion SE is designed specifically for 1/10 rock crawlers and trail trucks, delivering exceptional low-speed control and smooth startup behavior. FOC driving mode produces strong torque and precise throttle modulation, giving you the confidence to tackle steep climbs, tight rock sections, and technical obstacles. Integrated cruise control and hill descent features further improve drivability on difficult terrain. ⚡ Compact 2-in-1 Design By combining the ESC and motor into a single unit, the Fusion SE dramatically simplifies wiring and installation. Benefits include: Reduced wiring clutter Easier chassis layout Lower overall weight Cleaner installation Perfect for scale builds where space and simplicity matter. 🌧 Waterproof & Trail Ready With an IP67 waterproof rating, the Fusion SE is ready for harsh outdoor environments. Mud, snow, water crossings, and dusty trails are no problem for this sealed electronics system. 🏁 Features Integrated ESC and motor design Advanced FOC technology for ultra-smooth control Excellent low-speed torque and throttle precision Sine wave drive for quieter and more efficient operation Intelligent torque output and speed control Cruise control and hill descent capability Adjustable active drag brake Multiple protection systems for reliability IP67 waterproof and dustproof design Compatible with Hobbywing LED program box 📦 Includes (1) Hobbywing QuicRun Fusion SE FOC 2-in-1 ESC & Motor System (1200kV) 📊 Specifications Application: 1/10 Rock Crawler / Trail Truck Motor Type: Brushless (Integrated ESC) kV Rating: 1200kV Voltage Input: 2–3S LiPo / 6–9 Cell NiMH Continuous Current: 40A Motor Diameter: 36mm Motor Length: 58.1mm Shaft Diameter: 3.175mm Shaft Length: 16.5mm Motor Poles: 4 Waterproof Rating: IP67 Connector: XT60 Programming: Hobbywing LED Program Box (sold separately) Weight: 201g (including wires & connectors) If you're building a crawler that demands smooth control, compact electronics, and reliable trail performance, the Hobbywing Fusion SE is one of the best plug-and-play systems available.

Read more less

Take full control of your scale recovery setup with the INJORA Wireless Remote Receiver Winch Controller Set, designed for most 1/10 RC crawlers. This system gives you easy, wireless operation of your winch—perfect for Traxxas TRX-4, Axial SCX10, RC4WD builds, D90s, Tamiya CC01 rigs, and more. Just power the receiver, bind with the remote, and you're ready to control your winch without needing extra channels on your radio. Compact, easy to install, and incredibly convenient for trail trucks and scale rigs. Note: Winch and receiver shown in some photos are not included. ⭐ Features Compatible with most 1/10 scale RC winches Wireless remote for simple, fast winch control Plug-and-play receiver — easy installation Bind by holding the reset button until the red LED flashes Stable power range: 4.8V–12V Compact size fits easily into scale crawlers Ideal for TRX-4, SCX10, D90, CC01, and similar rigs 📐 Specifications Item: Wireless Winch Controller Quantity: 1 pcs Receiver Size: 41.5 × 31 × 10mm Controller Battery: 3V CR2032 (not included) Power Supply: 4.8–12V (from your receiver) Connection: As shown in wiring diagram/photos 📦 Includes (1) INJORA Wireless RC Winch Controller  

Read more less

Take your scale crawling to the next level with the Traxxas Pro Scale Winch Kit — a fully functional, high-strength winch system designed for the TRX-4 and TRX-6 platforms. With a 10-pound pulling capacity, metal hook, long reinforced winch line, and a wireless 2-channel remote, this winch doesn’t just look realistic… it performs. Perfect for scale recovery, technical trails, and rescuing your buddy’s rig, the Pro Scale Winch adds real utility and unmatched realism to any crawler setup. Features: ✔️ 10-lb pulling power for real recovery performance✔️ Wireless 2-channel remote — operate front & rear winches independently✔️ Free-spool button for fast manual line extraction✔️ Over 4 feet of high-strength reinforced line with a steel hook✔️ Automatic brake holds your vehicle securely on inclines✔️ Waterproof winch and remote electronics✔️ Direct battery connection via XL-5 HV accessory plug (no RX load)✔️ Drops into TRX-4 / TRX-6 winch-compatible bumpers✔️ Simple single-wire installation — no receiver access required✔️ Compatible with all Traxxas TRX-4 and TRX-6 models(No accessory bumper required for TRX-4 2021 Bronco #92076-4) Includes: (1) Remote-operated Pro Scale Winch Reinforced winch line Heavy-duty steel hook Fabric hook strap (1) Fob-style 2-channel wireless remote Line retainer, hardware & instructions Reinforced structure with triangulated ribs Smooth underside for reduced drag Exceptional balance for high-speed racing and rough terrain This chassis layout transforms handling, making the truck more planted and predictable through corners and over jumps. Electronics – Velineon Brushless Power + TSM The Ultimate features Traxxas’ proven brushless system: Velineon 3500 Brushless Motor VXL-3s Waterproof ESC (2–3S LiPo capable) TSM® Traxxas Stability Management for improved control on loose or slick surfaces Factory-installed telemetry sensors for real-time speed, temperature, and voltage TQi 2.4GHz Radio w/ Wireless Link Module The result: explosive acceleration, 60+ mph potential (with 3S), and professional-grade control in any conditions. Drivetrain & Suspension – Built to Handle Real Power The Slash 4X4 Ultimate is packed with premium upgrades normally purchased separately: Heavy-Duty Driveshafts Aluminum C-hubs, steering blocks & rear hubs Front & Rear sway bars (installed) Precision steel turnbuckles GTR PTFE-coated aluminum shocks with Ti-Ni shafts This reinforced system is engineered to harness the Velineon system’s power while providing smooth, predictable suspension response over high-speed off-road terrain. Features: ✔ Fully assembled Ready-To-Race®✔ Clipless race-style body mounting system✔ 2S–3S Velineon brushless system (waterproof)✔ TSM® stability control✔ Heavy-duty driveshafts & aluminum hub components✔ GTR aluminum shocks with PTFE coating✔ Installed sway bars for race-tuned handling✔ Built-in telemetry sensors for use with Traxxas Link✔ TQi 2.4GHz radio with Wireless Link module Includes: (1) Traxxas Slash 4X4 “Ultimate” VXL Brushless RTR (1) TQi 2.4GHz Radio System (with Wireless Link) Installed telemetry sensors Needed To Complete: (1) 2S–3S LiPo Battery w/ Traxxas iD connector (1) Compatible Traxxas iD Charger (4) AA batteries for transmitter Specifications: Scale 1/10 Short Course Length 22.4 in (568 mm) Width 11.65 in (296 mm) Height 7.6 in (193 mm) Wheelbase 12.75 in (324 mm) Weight 80.4 oz (2.28 kg) Drive 4WD Shaft-Driven Gear Pitch 32P Drive Ratio 11.82:1 (stock) Battery Compatibility 2S–3S LiPo Completion Level RTR

Read more less

  Light up the trail with the Traxxas TRX-4 LED Expedition Rack Scene Light Kit. Designed as an optional accessory for the TRX-4 Expedition Rack, these ultra-bright LED scene lights add a whole new level of realism and visibility to your scale adventures. Note: Requires TRX-4 Power Supply (TRA8028) for operation. Features:• Adds scale-realistic scene lighting to your TRX-4• Mounts directly to the TRX-4 Expedition Rack• Super-bright white LEDs for enhanced visibility• Durable and weather-resistant design• Requires TRA8028 power supply (sold separately) Includes:• (1) LED Expedition Rack Scene Light KitPart Number: 8086 Whether it’s night crawling or just adding to your scale setup—light the way in true TRX-4 style.

Read more less

The XPT3 LCG Transmission from Reefs RC is a purpose-built, ultra-compact drivetrain upgrade engineered for competitive 1/10 crawlers. Weighing in at just 75 grams, the XPT3 delivers a true low-CG advantage without sacrificing strength or reliability. Designed with a machined aluminum case, hardened steel gears, and titanium output shafts, this transmission is built to take abuse while maintaining smooth, precise power delivery. The forward motor mounting improves balance and packaging, while 48-pitch gearing and an easy-set gear mesh with protective cover keep performance consistent even in harsh trail conditions. Whether you’re running straight axles or portals, the XPT3 offers flexible gearing options to dial in the perfect final drive for your setup—making it a serious upgrade for high-end crawler builds. 🔧 Features Ultra-lightweight design — only 75g Compact low-profile (LCG) transmission layout CNC-machined aluminum case for durability Hardened steel gears for long service life Titanium output shafts for maximum strength Forward motor mounting for improved balance Smooth-running 48-pitch gears Easy gear-mesh setup with debris-blocking cover 📐 Specifications Weight: 75g Pinion Range: 11T–20T (48p) Transmission Ratio: 6.75:1 – 12.27:1 Final Drive Ratios (FDR): Straight Axle: 25.31:1 – 46.02:1 Axial Portal Axle: 48.52:1 – 88.21:1 Vanquish F10 Portal Axle: 35.44:1 – 64.43:1 📦 Includes (1) Reefs RC XPT3 LCG Transmission (Silver) ⚠️ Pinion Recommendation Straight axles: 11T Portal axles: 14T(May vary depending on rig setup and motor choice) ✅ Compatibility Axial SCX10 II Axial SCX10 III Vanquish Products VRD Vanquish Products VS4-10 A premium transmission built for serious crawlers—lightweight, strong, and engineered to win.

Read more less

Versatile Fit. Precision Mounting. Customize your VS4-10 build with the Vanquish Products Body Post Set, designed to provide multiple mounting options for a perfect body fit. Featuring six different height body posts, this set makes it easy to fine-tune your setup for a variety of crawler bodies and configurations. Precision by Design Each body post is crafted from durable, high-quality material to maintain alignment and withstand trail abuse. Whether you’re going for a competition setup or scale trail realism, this kit gives you the flexibility and reliability Vanquish is known for. Features: Six body post sizes for customizable body height and fitment Durable composite construction for long-lasting use Precision-engineered for perfect alignment and secure mounting Direct factory fit for the VS4-10 platform Genuine Vanquish Products quality Includes: (1) 90mm Body Post (1) 75mm Body Post (1) 60mm Body Post (1) 48mm Body Post (1) 30mm Body Post (1) 113mm One-Piece Body Post Compatibility: Vanquish Products VS4-10 Platform Vanquish Products — Precision Parts for Serious Crawlers.  

Read more less

Overview:The Traxxas TRX-4 Nissan Pathfinder combines legendary TRX-4 capability with the rugged style of Nissan’s off-road icon. Featuring a fully licensed Pathfinder body with a clipless mounting system, remote-locking differentials, and a high/low 2-speed transmission, this rig delivers an unmatched blend of realism, performance, and durability right out of the box. About the TRX-4 Nissan Pathfinder Officially Licensed Nissan® Pathfinder® BodyThe detailed clipless body captures the spirit of Nissan’s classic off-roader. Every contour and accessory — from the grille and bumpers to mirrors, push bar, and roof spoiler — reflects Traxxas’ focus on scale realism. Full inner fender liners and floor pans add authenticity and protect electronics from dirt and debris. Trail-Ready PerformancePowered by the Titan® 21T reverse-rotation brushed motor and XL-5™ HV waterproof ESC, the Pathfinder provides smooth control, impressive torque, and selectable drive modes — including Trail Mode and Crawl Mode for technical terrain. The portal axles increase ground clearance and eliminate torque twist, while oil-filled GTS aluminum shocks keep the ride plush and controlled. Rugged Steel BackboneA 1.5 mm-thick steel ladder frame provides extreme rigidity, adjustable wheelbase positions, and integrated wire routing clips. Heavy-duty 4-link suspension, remote-locking steel gear differentials, and a 2-speed transmission deliver the power and precision needed for serious crawling. Smart Radio SystemThe included TQi™ 2.4 GHz 4-channel radio features cruise control and can be paired with the optional Traxxas Link Wireless Module (6511) for full telemetry and tuning via the Traxxas Link app. Features Officially licensed Nissan Pathfinder clipless body Titan® 21T reverse-rotation motor XL-5™ HV waterproof ESC with 5 drive profiles High/Low 2-speed transmission with remote shifting Remote-locking front and rear differentials Portal axles for extra clearance and torque twist elimination Full-time shaft-driven 4WD drivetrain Oil-filled aluminum GTS shocks Rigid 1.5 mm steel ladder frame TQi™ 4-channel 2.4GHz radio with cruise control Ready-To-Drive® out of the box Includes (1) TRX-4 Nissan Pathfinder RTR 1/10 Scale Crawler (1) Titan® 21T Motor (1) XL-5™ HV ESC (1) TQi™ 4-channel 2.4 GHz Radio System (1) Nissan Pathfinder Clipless Body High-quality maintenance tools Needed To Complete (1) Battery Pack: 7-cell NiMH or 2S–3S LiPo (sold separately) (1) Compatible Charger (Traxxas EZ-Peak® recommended) (4) AA Batteries for Transmitter Specifications Scale: 1/10 Drive: 4WD, shaft-driven Length: 22.72 in (577 mm) Width: 9.78 in (249 mm) Height: 9.49 in (241 mm) Wheelbase: 12.28 in (312 mm) Weight: 6.78 lb (3.08 kg) Ground Clearance: 3.14 in (80 mm) Transmission: 2-speed, remote shifting Differentials: Remote locking, steel gears ESC: XL-5 HV (brushed) Motor: Titan 21T reverse rotation Servo: 2075X metal gear digital Radio: TQi 2.4GHz 4-channel with 6533 receiver

Read more less

Upgrade or replace your TRX-4’s battery mounting system with this Traxxas 8223 Battery Plate & Strap Set. Designed for secure battery placement, this set ensures your power source stays firmly in place during the toughest crawls and trail adventures. Compatible with the TRX-4 Ford Bronco kit and requires TRA8072 inner fenders for installation. 🔧 Includes: (1) Battery plate (1) Battery strap (4) 3x8mm flat head screws ✅ Features: Genuine Traxxas replacement part Provides secure battery mounting Built for rugged trail and crawler use Perfect fit for your TRX-4 Ford Bronco build!

Read more less

⚙️ Hardened Steel. Maximum Clearance. Built for Extreme Articulation. Upgrade your Axial Wraith drivetrain with the SSD RC Scale Steel Driveshaft. CNC-machined from hardened steel, this heavy-duty driveshaft combines serious durability with a slim, scale-style design that provides improved ground clearance compared with the stock WB8-style shaft and many aftermarket alternatives. With precision splines and an impressive 50-degree operating angle, the SSD driveshaft is designed to operate smoothly even when your suspension is pushed into aggressive articulation. ⚡ Features: 💪 CNC-machined hardened steel construction🪨 Slim design provides improved ground clearance🏁 Realistic scale appearance⚙️ Precision-machined splines for smooth operation🔄 Up to 50° operating angle for aggressive suspension articulation🔧 Fully assembled and ready for installation🚙 Suitable for front or rear installation📏 Fits 5mm diameter output shafts🔩 Compatible with Axial M4 screw shaft AXI31045🛠️ M4 set screw design⚖️ Heavy-duty 59g construction 📦 Includes: (1) SSD RC Wraith Scale Steel Driveshaft 📏 Specifications: Part Number: SSD00077Material: Hardened SteelConstruction: CNC MachinedShaft Diameter Compatibility: 5mmMaximum Operating Angle: 50°Weight: 59gPosition: Front or Rear 🔧 Compatibility: ✅ Axial Wraith 💡 Pro Tip: The slimmer profile is especially useful on technical crawler builds where driveshaft clearance becomes an issue at full suspension compression or articulation. With its 50-degree operating angle, the SSD steel driveshaft is also a strong choice for Wraith builds running aggressive suspension setups or increased articulation.

Read more less

 ⚙️ Ultimate Crawler Control. Front & Rear Dig. Built-In Overdrive. Take your custom crawler to the next level with the REEFS RC XP Dual Dig Transmission. Engineered for serious rock crawling, this advanced transmission gives you independent dig functionality with smooth, precise engagement for tighter turns, better positioning, and maximum control on technical terrain. At the heart of the system is REEFS RC's patent-pending Revolve Dig technology, providing three-position operation—Drive, Free-Wheel, and Locked—with clean engagement and release without needing to bump the throttle. ⚡ Features: 🪨 Advanced dual-dig transmission for custom crawler builds🎯 Three-position dig operation: Drive / Free-Wheel / Locked⚙️ Patent-pending Revolve Dig Plate design🚀 Smooth, immediate engagement and disengagement🔄 Built-in 22% overdrive for increased front-end pull💪 Hardened steel 48P gears and shafts🛡️ CNC-machined aluminum transmission housing⚖️ Lightweight design without sacrificing drivetrain strength🔧 Forward motor mounting configuration🎮 Integrated servo mounting🏁 Ball-bearing-supported drivetrain🔩 Includes aluminum servo horns🔥 Designed for high-performance and competition crawler setups 📦 Includes: (1) REEFS RC XP Dual Dig Transmission Aluminum Servo Horns 🔧 Needed to Complete: (2) REEFS 99 Micro Servos or (2) REEFS 179 Micro Servos Servos are not included. 📏 Specifications: Part Number: SEHREEFS264Color: BlackGear Pitch: 48PBuilt-In Overdrive: 22%Housing Material: CNC-Machined AluminumGear/Shaft Material: Hardened Steel Length:Housing – 63mmShaft End-to-End – 81mm Width: 60mm Height:Housing – 45mmTop of Shift Arm – 59mm 💡 Pro Tip: Dual dig gives advanced crawler drivers significantly more control over vehicle positioning. With the ability to switch between drive, free-wheel, and locked modes, you can tighten your turning radius, reposition the chassis on technical obstacles, and better control the front or rear of the rig. Combine that with the built-in 22% overdrive, and the XP is designed for serious technical crawling where precision matters. Tech Note: Requires two REEFS 99 or REEFS 179 Micro Servos for dig operation.

Read more less

  🪨🏔️ Aggressive Traction for Class 2 Crawlers & Scale Rigs The Pro-Line Trencher 1.9" Rock Terrain Rock Crawler Tires bring the proven Trencher tread design to 1.9" Class 2 crawlers and scale rigs. Measuring 4.75" tall and 1.81" wide, these tires feature an aggressive multi-level tread with extensive siping to provide excellent tread flex and traction across rocks, trails, and challenging terrain. This version is molded in Pro-Line's legendary G8 compound for dependable crawling grip and performance. 🛞 About the Trencher 1.9" 🪨 Aggressive Multi-Level Tread Each tread block features multiple sipes and varying tread levels, allowing the tire to flex and conform to uneven surfaces for increased traction. The aggressive pattern is inspired by Pro-Line's popular all-terrain Trencher design. ⛰️ Side-Hilling Traction Detailed connected tread extends onto the sidewall to provide additional grip when side-hilling and navigating off-camber terrain. This helps keep your crawler planted when the trail gets technical. 🔥 Legendary G8 Compound Pro-Line's G8 compound provides a proven combination of grip and durability for rock crawling and trail applications. 🇺🇸 Made in the USA Like many of Pro-Line's performance tires, the Trencher 1.9" is proudly Made in the USA. 🔧 Features Designed for 1.9" rock crawlers and Class 2 rigs Aggressive Trencher all-terrain tread design Multiple sipes provide increased tread flex Multi-level tread blocks conform to uneven terrain Connected sidewall tread improves side-hilling traction Pro-Line G8 compound 4.75" overall tire height 1.81" tire width Foam inserts included Great for scale crawlers, trail rigs, and technical rock crawling Made in the USA 📦 Includes (2) Pro-Line Trencher 1.9" Rock Crawler Tires – G8 (2) Foam Inserts 📊 Specifications Specification Details Brand Pro-Line Part Number PRO10183-14 Product Type Rock Crawler Tires Wheel Size 1.9" Tire Height 4.75" Tire Width 1.81" Compound G8 Application Rock Crawling / Trail Quantity 2 Tires Foam Inserts Included 🚙 Popular Compatibility Axial SCX10 Pro Traxxas TRX-4 Other compatible 1.9" Class 2 crawler and scale platforms Note: Wheels are sold separately.  

Read more less

  ⚙️💪 High-Torque, Waterproof Performance for 1/10 RC Vehicles The EcoPower WP125T Waterproof High Torque Metal Gear Digital Servo is a dependable high-voltage steering upgrade for a wide variety of 1/10-scale RC vehicles. Featuring a powerful coreless motor, full metal geartrain, waterproof construction, and up to 400 oz-in of torque, the WP125T delivers the strength, speed, and durability needed for crawling, bashing, trail driving, and high-performance off-road applications. Backed by EcoPower's Lifetime Gear Warranty through AMain Hobbies, it's built to perform with confidence. ⚙️ About the WP125T Servo 💪 Powerful High-Torque Performance Operating on 6.0–8.4V, the WP125T delivers up to 400 oz-in (28.8 kg-cm) of torque with fast transit speeds, providing strong steering authority for demanding terrain and larger tires. 🔩 Full Metal Gear Construction The durable all-metal geartrain resists wear and damage under heavy loads while dual ball bearings and a coreless motor provide smooth, precise steering response. 💧 Waterproof Reliability Sealed waterproof construction protects the servo from rain, mud, snow, and wet conditions, making it an excellent choice for year-round outdoor driving. 🔧 Features ✔ High-voltage digital servo (6.0–8.4V)✔ Up to 400 oz-in of torque✔ Full metal geartrain✔ Coreless motor for smooth, responsive performance✔ Dual ball bearings✔ Waterproof up to one meter✔ Enhanced waterproof sealing✔ 25T output spline✔ Includes aluminum 25T clamping servo horn✔ Lifetime Gear Warranty through AMain Hobbies 📦 Includes (1) EcoPower WP125T Waterproof High Torque Digital Servo (1) Aluminum 25T Clamping Servo Horn Servo Hardware & Grommets 📊 Specifications Specification Details Part Number ECP-125T Application 1/10 Surface Operating Voltage 6.0–8.4V Motor Type Coreless Gear Material Metal Output Spline 25T Bearings Dual Ball Bearings Waterproof Yes Speed @ 6.0V 0.11 sec/60° Speed @ 7.4V 0.09 sec/60° Torque @ 6.0V 337 oz-in (24.4 kg-cm) Torque @ 7.4V 400 oz-in (28.8 kg-cm) Pulse/Frequency 1520µs / 333Hz Dimensions 39.5 x 20 x 38.9mm Weight 2.5oz (70.9g) 🚗 Compatibility Compatible with many 1/10-scale RC vehicles, including: ARRMA Big Rock 3S BLX ARRMA Granite ARRMA Infraction MEGA ARRMA Infraction 3S BLX ARRMA Senton ARRMA Vorteks Axial Capra Axial SCX10 II Axial SCX10 III Losi 22S Drag Losi 22S SCT Losi Tenacity DB Losi Tenacity TT Pro Traxxas Bandit Traxxas Hoss Traxxas Rustler 2WD & 4X4 Traxxas Slash 2WD & 4X4 Traxxas Stampede 2WD & 4X4 Traxxas TRX-4 ⚠️ Notes Includes a 25T aluminum clamping servo horn and installation hardware. Covered by the EcoPower Lifetime Gear Warranty through AMain Hobbies. • • Verify servo dimensions, spline count, and mounting requirements before installation.

Read more less

🚛💨 Official Freedom Flyer Styling Meets Brushless Bash-Ready Performance The Arrma Freedom Flyer 223S BLX delivers aggressive monster truck performance with officially licensed Freedom Flyer styling inspired by Cleetus McFarland and Tomfoolery Motorsports. Built on the proven 223S BLX platform, this 1/10 scale 2WD monster truck features a powerful Spektrum brushless system, Dynamic Stability Control (DSC), and the flexibility to run on either 2S or 3S LiPo power. Better yet, it comes complete with a Smart battery and charger so you're ready to hit the dirt with minimal setup. 🏁 About the Freedom Flyer 223S BLX ⚡ Brushless Power That Grows With You Whether you're just getting started or ready for serious speed, the Freedom Flyer delivers exciting performance. Features include: Spektrum 4000kV brushless motor Spektrum SLT 45A 2-in-1 ESC/Receiver Compatible with 2S and 3S LiPo batteries Speeds exceeding 50 MPH on 3S LiPo (under optimal conditions) Smooth, responsive throttle control 🎮 Dynamic Stability Control (DSC) Dynamic Stability Control helps keep the truck pointed where you want it by automatically providing steering assistance when traction is lost. Benefits include: Increased control on loose terrain More confidence for newer drivers Adjustable assistance without sacrificing fun 🚛 Official Freedom Flyer Styling Licensed graphics and scale-inspired details recreate the look of the full-size Freedom Flyer monster truck. Highlights include: Official Freedom Flyer body Hidden clipless body mounting system Aggressive monster truck stance Tool-free body removal for quick battery access 💪 Built for Serious Bashing Designed to withstand jumps, wheelies, and rough terrain, the Freedom Flyer is packed with durable components. Features include: Metal gear drivetrain High ground clearance chassis All-terrain suspension dBoots Cut Chevron MT tires Integrated wheelie bar Water-resistant electronics 🔧 Features ✔ Officially licensed Freedom Flyer body and graphics✔ Spektrum 4000kV brushless motor✔ 2S & 3S LiPo compatible✔ Dynamic Stability Control (DSC)✔ Hidden clip-free body retention system✔ Durable metal gear drivetrain✔ High ground clearance chassis✔ All-terrain suspension package✔ dBoots Cut Chevron MT monster truck tires✔ Integrated wheelie bar✔ Water-resistant electronics✔ Ready-to-Run with battery and charger included 📦 Includes (1) Arrma Freedom Flyer 223S BLX 1/10 2WD Monster Truck (1) Spektrum 4000kV Brushless Motor with 40mm Cooling Fan (1) Spektrum SLT 45A 2-in-1 ESC & Receiver (IC5) (1) Spektrum S681 Metal Gear Digital Servo (1) Spektrum SLT2 2.4GHz 2-Channel Transmitter with DSC (1) Spektrum Smart G2 2S 4000mAh 30C LiPo Battery (IC5) (1) Spektrum S100 Smart USB-C Charger (4) AA Transmitter Batteries Product Manual 🔌 Needed to Complete USB-C Power Adapter 📊 Specifications Specification Details Scale 1/10 Drive 2WD Power Source 2S–3S LiPo Length 18.31in (465mm) Wheelbase 11.61in (295mm) Width 13.58in (345mm) Height 9.06in (230mm) Weight 96.32oz (2730.63g) Motor Spektrum 4000kV Brushless ESC Spektrum SLT 45A 2-in-1 Brushless ESC/Receiver Servo Spektrum S681 Metal Gear Digital Connector IC5 Hex Size 14mm Tires dBoots Cut Chevron MT Assembly Level Ready-to-Run (RTR) 🚗 Perfect For ✔ Monster truck bashing✔ Dirt, gravel, grass, and pavement✔ Drivers upgrading from brushed vehicles✔ Fans of Cleetus McFarland and Freedom Flyer✔ Wheelies, jumps, and high-speed fun ⚠️ Notes Ready-to-Run vehicle includes the transmitter, Smart 2S LiPo battery, Smart USB-C charger, and AA batteries. Only a USB-C power adapter is required to begin charging. Compatible with both 2S and 3S LiPo batteries for adjustable performance. Water-resistant electronics help provide confidence in wet conditions, but routine maintenance is recommended after exposure to water or mud.  

Read more less

🏁⚙️ Restore Smooth High/Low Gear Shifting The Traxxas TRX-4 2-Speed Drive Hub & Linkage Set is a genuine replacement component kit designed for TRX-4 models equipped with the factory 2-speed transmission. Whether you're repairing a worn transmission or restoring crisp shifting performance, this set includes the essential drivetrain components needed to maintain reliable high and low gear operation. Built to original Traxxas specifications, these replacement parts provide the precise fit and durability needed to keep your TRX-4 trail-ready. 🏁 About the 2-Speed Drive Hub & Linkage Set ⚙️ Restore Shifting Performance This replacement set includes the primary components used in the TRX-4 high/low 2-speed transmission, helping maintain smooth gear engagement and dependable shifting. 🔧 Genuine Traxxas Replacement Manufactured to factory specifications for proper fit, reliable operation, and long service life. 🛠️ Perfect for Repairs & Rebuilds Ideal for: Transmission repairs Restoring worn shifting components Routine drivetrain maintenance Complete transmission rebuilds 🔧 Features ✔ Genuine Traxxas replacement part✔ Direct replacement for TRX-4 2-speed transmission✔ Restores smooth high/low gear shifting✔ Factory fit and function✔ Durable construction for long service life✔ Ideal for maintenance and drivetrain repairs 📦 Includes (1) 2-Speed Drive Hub (1) Shift Dog (1) Shift Fork (1) 2-Speed Linkage 🚗 Compatibility Traxxas TRX-4 equipped with a factory 2-speed transmission ⚠️ Notes Genuine Traxxas replacement component. Designed for compatible TRX-4 models with the factory 2-speed transmission. Verify compatibility before installation.  

Read more less

🔩 A simple hardware upgrade for securing wheels and components with a clean, reliable fit. 🔧 Highlights: ✔ M4 fixed nut design✔ Easy to install and remove✔ Reliable hold for everyday use✔ Great for maintenance or replacements 🎨 Available Colors: • Gold• Blue• Green• Black• Red 🚗 Compatibility: • Axial SCX10• Traxxas TRX-4• Other 1/10 RC vehicles using M4 hardware 🔧 Small part. Solid hold. Gets it done.BOOF RC – No nonsense. Just works.      

Read more less

Add a custom look and premium durability to your wheels with the REEFS RC SLUICE Beadlock Rings. Precision machined from aluminum and finished in a bold blue anodized coating, these rings are designed to upgrade both the style and strength of your crawler setup. Built specifically for REEFS 1.9 aluminum wheels, the SLUICE rings provide a secure beadlock hold while enhancing the overall appearance of your rig with a clean, detailed design. 🔧 Features:• Precision machined aluminum construction• Durable blue anodized finish• Designed for REEFS 1.9 aluminum wheels• Provides secure beadlock tire mounting• Enhances wheel style with a clean SLUICE design 📦 Includes:• (2) SLUICE 1.9" Beadlock Rings ⚙️ Specifications:• Wheel Size: 1.9"• Color: Blue Upgrade your crawler’s look and performance with the REEFS SLUICE beadlock rings, built for durability, style, and a perfect fit.    

Read more less

Give your crawler the durability upgrade it deserves with the Traxxas TRX-4 Stainless Steel Hardware Kit. Designed to replace the factory chassis screws, this all-inclusive kit boosts corrosion resistance and long-term reliability — perfect for drivers who tackle mud, water, and harsh trail conditions. Constructed from high-quality stainless steel, this hardware helps prevent rust while maintaining a clean, premium look on your build. Hex-drive heads provide a secure connection for easier installation and removal, reducing the chance of stripped screws during maintenance. The included organized storage box features labeled compartments and a built-in measuring guide, making it simple to identify the correct hardware when wrenching on your rig. 🔧 Key Features: ✅ Replaces standard chassis screws with corrosion-resistant stainless steel✅ Ideal for wet, muddy, and high-moisture environments✅ Hex-drive heads for a strong, positive tool engagement✅ Helps reduce stripped screws during maintenance✅ Organized storage box with labeled compartments✅ Built-in measuring guide for quick hardware identification✅ Enhances long-term durability and reliability 📦 Includes: Complete stainless steel chassis screw and hardware assortment Organized storage case with part identification labels ⚙️ Compatibility: Traxxas TRX-4® 1/10 Scale Trail Trucks ⚠️ Important Notes: Does NOT include body screws Does NOT include front battery tray screws  

Read more less

Upgrade your TRX-4® with the aggressive style and performance of Traxxas 2.2" Chrome Mag Wheels. These wheels come factory assembled and ready to mount, complete with pre-installed foam inserts and Canyon Trail 2.2" x 5.3" tires for maximum traction and scale realism. Originally designed for the Chevrolet® K10 High Trail® Edition, this wheel and tire set is compatible with all Traxxas TRX-4 models equipped with the Long Arm Lift Kit, making it a great upgrade for lifted rigs running oversized tires. Each pair includes center caps and decals to complete the look. 🛞 Performance Meets Style Deep tread blocks provide maximum traction on rugged terrain Trail-tuned foam inserts deliver realistic crawling performance Chrome mag wheels offer a bold, scale look 🚀 Features 2.2" chrome mag wheels Mounted Canyon Trail 2.2" x 5.3" tires Pre-installed foam inserts Center caps (x4) included Decals included Factory assembled — ready to mount Sold as a pair 🔧 Compatibility Fits Traxxas TRX-4® models equipped with the Long Arm Lift Kit, including: TRX-4 Chevrolet Blazer High Trail Edition (92086-4) TRX-4 Chevrolet K10 High Trail Edition (92056-4) TRX-4 Ford F-150 High Trail Edition (92046-4) TRX-4 Sport High Trail Edition Compatible with any TRX-4 that has been converted to the High Trail / Long Arm geometry. ⚠️ Required Hardware To install this wheel and tire set, you must use: Traxxas 8255A Extended Thread Stub Axles(Not included) 📦 Includes (2) 2.2" Chrome Mag Wheels (2) Mounted Canyon Trail 2.2" x 5.3" Tires (4) Center caps Decals 🏁 Why You'll Love Them Ready-to-run quality with premium fit, finish, and performance — perfect for lifted crawlers that demand both style and capability.

Read more less

Take control of the toughest trails with the JConcepts Bossman 1.9" Rock Crawler Tires, built for extreme traction, durability, and class-leading performance. Designed for serious 1/10 scale crawlers, the Bossman’s asymmetrical tread pattern delivers unmatched grip and adaptability — giving each side of your rig its own optimized traction profile for conquering diverse terrain. Crafted from JConcepts’ Green Super Soft compound, these tires flex, conform, and bite into rock, dirt, and uneven surfaces with precision. Whether you’re scaling slick rock faces or navigating jagged terrain, the Bossman tires deliver competition-ready performance with a clean, uniform carcass design and detailed sidewall lugging. ⚙️ Features: Asymmetrical tread pattern for left/right traction optimization Class 1 competition legal (4.19" OD) for realistic and performance-oriented builds Micro-bladed tread plots increase flexibility and terrain conformity Aggressive sidewall lugging enhances pinch grip and climbing stability Continuous thickness carcass for predictable handling and shape retention Fits all 1.9” crawler wheels for easy compatibility Recessed JConcepts logo and molded part number for authenticity Includes open-cell foam inserts for balanced internal support Engineered for maximum performance in Green compound for ultimate traction 📏 Specifications: Part Number: 4137-02 Scale: 1/10 Competition Class: Class 1 Outer Diameter: 4.19" (120.65mm) Inner / Outer Diameter: 1.9" Compound: Green (Super Soft) Quantity: 2 Tires + 2 Foams 📦 Includes: (2) JConcepts Bossman 1.9" Rock Crawler Tires (2) Open-Cell Foam Inserts 💡 Pro Tip:Pair the Bossman Tires with JConcepts Landmines or Tusk tires for versatile setups — perfect for adapting to varying course conditions from slick stone to loose terrain.

Read more less

🔧 Precision. Strength. Style. Upgrade your steering setup with the Hot Racing Aluminum Servo Horn, designed for the Traxxas TRX-4 and TRX-6. CNC-machined from aluminum and finished in anodized blue, this single-arm servo horn provides greater strength and precision over the stock part, while adding a custom look to your rig. ✅ Fits 25T spline servos – Traxxas, ProTek, Futaba, Savox, and more✅ CNC-machined aluminum for durability✅ Anodized blue finish for style✅ M3 diameter linkage holes✅ Direct replacement for Traxxas part TRA8247✅ Vehicle Compatibility: • Traxxas TRX-4 • Traxxas TRX-6 📦 Includes:• (1) Aluminum Servo Horn – 25T (Blue)

Read more less

  Restore smooth power delivery to your TRX-4’s front axle with this genuine Traxxas Portal Drive Input Gear set. This kit includes the front portal input gear, drive pin, and cross pin—everything you need for a quick and reliable repair. Features:• Replacement front portal drive input gear• Includes drive pin and cross pin• Precision-engineered for TRX-4 portal axle systems• Durable steel construction for trail-tough performance Includes:• (1) Front Portal Drive Input Gear• (1) Drive Pin• (1) Cross PinPart Number: 8257 Genuine Traxxas parts for dependable fit, function, and durability on the toughest trails.

Read more less

Restore your body mounting system with this genuine Traxxas replacement set. The TRX-4 Front & Rear Body Mount and Post Set includes everything needed to securely attach your body shell—perfect for repairs, custom builds, or switching body styles. Features:• Direct replacement body mount and post set• Fits Traxxas TRX-4 models• Includes both front and rear mounts Includes:• (1) Front Body Mount & Posts• (1) Rear Body Mount & PostsPart Number: 8215 Keep your body shell secure and trail-ready with OEM-quality fit  

Read more less

Fine-tune your suspension setup with Traxxas 0.30 Rate White GTS Shock Springs. Designed for TRX-4 models equipped with GTS shocks, these medium-rate springs offer a great balance of support and flexibility—ideal for trail and crawling applications where a little extra firmness makes all the difference. Features:• 0.30 spring rate – medium (White)• Optimized for GTS shocks on TRX-4 platforms• Great for added stability and handling• Color-coded for easy tuning reference• Durable steel construction Includes:• (2) White 0.30 Rate GTS Shock SpringsPart Number: 8043 The perfect balance between flex and firmness—dial in your TRX-4’s ride for any terrain.

Read more less

Dial in your suspension with Traxxas 0.22 Rate Yellow GTS Shock Springs. These soft-rate springs are perfect for lighter rigs or tuning for more articulation and crawling performance. Designed for GTS shocks found on TRX-4 models, they offer a precise fit and consistent rebound. Features:• 0.22 spring rate – soft (Yellow)• Ideal for fine-tuning suspension feel• Fits Traxxas TRX-4 GTS shocks• Durable steel construction• Color-coded for easy identification Includes:• (2) Yellow 0.22 Rate GTS Shock SpringsPart Number: 8042 Customize your ride’s performance—because every trail demands a different setup.  

Read more less

Traxxas TRX-4® Pro Scale LED Light Kit – Part #8035R💡 Factory-Fit Illumination for Your Classic Ford Build Bring your vintage Ford Bronco or F-150 (1979) to life with the Traxxas Pro Scale® LED Light Kit. Designed specifically for the #8010 and #9230-series TRX-4® bodies, this complete lighting system adds brilliant realism with working headlights, tail lights, and side markers—all powered through the included distribution block and power module. ✅ Fits TRX-4® 1979 Ford Bronco or F-150 bodies✅ Includes full-function headlights, tail lights, and side markers✅ Easy plug-and-play installation with included power module✅ Designed for true-to-scale realism and long-lasting performance✅ Compatible with Traxxas Link and Pro Scale lighting control (when used with TQi and module) 📦 Includes: (1) Power Module (1) Distribution Block (2) Headlights (2) Tail Lights (4) Side Marker Lights Mounting hardware and wiring 🔥 Take your TRX-4 scale build to the next level with realistic lighting performance!

Read more less