Dial in your handling with the Traxxas Front & Rear Sway Bar Kit. Designed to reduce chassis roll and improve cornering stability, this kit is a must-have upgrade for racers and bashers who want sharper control and better balance at high speeds. ⚡ Features: Includes two front and two rear sway bars for tuning options Adjustable linkage for precise setup Improves stability during cornering and high-speed runs Genuine Traxxas quality for perfect fit and durability 📦 Includes: (2) Front sway bars (2) Rear sway bars Adjustable linkage Mounting hardware Compatibility: Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Hoss 4x4 Traxxas Rally Traxxas Stampede 4x4 Traxxas Telluride 4x4 Part #: 6898  

Read more less

Upgrade your drivetrain with the Traxxas Rear HD Driveshaft Assembly, built tough with a 6mm axle for maximum durability. Designed for use on the Hoss 4x4, Rustler 4x4, and Slash 4x4, this assembly is required when your vehicle is equipped with the Traxxas Extreme Heavy Duty Suspension Upgrade Kit (TRA9080X). ✅ Heavy-Duty Strength – Built to handle extreme torque and off-road abuse✅ Direct Replacement – OEM fit for Hoss 4x4, Rustler 4x4, and Slash 4x4✅ Complete Assembly – Comes pre-assembled with axle and hardware for quick install✅ For HD Suspension Models – Compatible only with vehicles using the TRA9080X Extreme Heavy Duty Suspension Kit Includes: (1) Rear HD Driveshaft Assembly w/ 6mm axle Required hardware Compatibility: Traxxas Hoss 4x4 (with TRA9080X kit) Traxxas Rustler 4x4 (with TRA9080X kit) Traxxas Slash 4x4 (with TRA9080X kit) Take your 4x4’s durability to the next level with the Traxxas 9052 Rear HD Driveshaft Assembly — built for serious bashing and racing.

Read more less

Keep your Maxx drivetrain strong with the Traxxas Differential Output Yoke Assembly. This pre-assembled unit includes the external-spline half shaft and fits either the front or rear differential. ✅ Pre-Assembled – Ready to install with external-spline half shaft included✅ Front or Rear Fitment – Versatile design works on either end of your Maxx✅ Genuine Traxxas Part – OEM quality and durability✅ Note: Does not fit Maxx models with narrow suspension Compatibility: Traxxas Maxx (wide suspension version only) Includes: (1) Pre-assembled Differential Output Yoke with half shaft Built tough for extreme action, the Traxxas 8949X Output Yoke Assembly keeps your Maxx running smooth and reliable.

Read more less

Keep your suspension strong and reliable with the Traxxas X-Maxx Rear Shock Tower. Designed as a direct replacement, this shock tower set includes both left and right halves for a complete installation. Built from heavy-duty composite materials, it delivers the durability and strength needed to handle the extreme demands of the X-Maxx. ✅ Complete Set – Includes both left and right halves✅ Heavy-Duty Composite – Built tough for extreme off-road use✅ Direct Replacement – Genuine Traxxas part for perfect fit Compatibility: Traxxas X-Maxx Includes: (1) Left Shock Tower Half (1) Right Shock Tower Half ⚡ Maintain peak performance and durability — replace worn parts with the genuine Traxxas X-Maxx Rear Shock Tower.

Read more less

Take on any terrain in style with the Traxxas 2.8" Talon Tires, pre-mounted on All-Star black chrome wheels. Built for performance and durability, these tires feature a soft rubber compound, long-wear tread pattern, and precision foam inserts for reliable grip on dirt, asphalt, grass, or rocks. The tapered tread edges reduce traction roll, while the aggressive design boosts ride height and ground clearance. ✅ All-Terrain Performance – Exceptional traction with long-wear tread✅ Pre-Glued & Ready – Tires come mounted with foam inserts for instant use✅ Durable & Lightweight – Strong nylon wheels that resist bending and corrosion✅ Black Chrome Finish – Bold, sleek look with Traxxas All-Star wheels Compatibility: Traxxas Hoss Traxxas Nitro Stampede Traxxas Stampede 2WD Traxxas Stampede 4X4 Includes: (2) Talon 2.8" Tires (w/foam inserts) (2) All-Star Black Chrome Wheels (pre-mounted) ⚡ Conquer every surface while upgrading your look — the Talon 2.8" Tire & Wheel Set in Black Chrome is built tough and made to shine.

Read more less

Upgrade your ride with the Traxxas 2.8" Talon Tires, pre-mounted on All-Star mirror chrome wheels. These tires deliver all-terrain versatility with a long-wear tread pattern, soft rubber compound, and precision foam inserts. Whether you’re bashing on asphalt, dirt, rocks, or grass — the Talons are built to handle it all with style. ✅ All-Terrain Traction – Soft compound + foam inserts for grip on any surface✅ Durable Tread Pattern – Long-lasting performance with tapered edges to reduce traction roll✅ Pre-Glued Convenience – Ready to install and hit the ground running✅ Mirror-Chrome Wheels – Bold looks with strong, lightweight nylon construction Compatibility: Traxxas Hoss Traxxas Nitro Stampede Traxxas Stampede 2WD Traxxas Stampede 4X4 Includes: (2) Talon 2.8" Tires (w/foam inserts) (2) All-Star Mirror Chrome Wheels (pre-mounted) ⚡ Run harder, grip longer, and look sharper — the Talon 2.8" tire & wheel set is the upgrade your truck deserves.

Read more less

Traxxas Camber Link (Grey) (4) Part #: 3641A Keep your suspension solid with the Traxxas Camber Link Set. These fixed, non-adjustable links provide a preset camber angle for consistent handling and a simple “set it and forget it” solution. Perfect for drivers who want durability and convenience without constant tuning. ✅ Fixed Camber Angle – Consistent geometry, no adjustments needed✅ Durable Composite Construction – Built to handle racing and bashing abuse✅ Direct Replacement – Easy install with factory precision✅ Set of Four – Complete coverage for your ride Compatibility: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Stampede 2WD Traxxas Bandit Includes: (4) Grey Camber Links ⚡ Simple. Strong. Reliable. Traxxas camber links keep you in the race without the wrenching.

Read more less

Upgrade your 2WD Traxxas ride with the HD Cold Weather Front Suspension Arm Set. Built from Traxxas’ proprietary heavy-duty composite, these arms are engineered to handle extreme loads, big landings, and cold weather conditions without breaking. Perfect for bashing, racing, or speed runs, they deliver maximum durability with the right amount of flex. ✅ Heavy-Duty Composite – Designed to handle high loads and resist breakage✅ Cold Weather Ready – Maintains strength and flexibility even in low temps✅ Direct Fit Replacement – Easy install with factory precision✅ Extreme Durability – Built for jumps, landings, and high-performance driving Compatibility: Traxxas Slash 2WD Traxxas Stampede 2WD Traxxas Rustler 2WD Includes: (2) HD Cold Weather Front Suspension Arms (Black) ⚡ Send it higher, land it harder — these HD arms are ready for anything.  

Read more less

Upgrade your Pro Scale Sand Car with the Hardened Steel Front Suspension Pin Set. Built for extreme durability, these precision-engineered suspension pins replace stock components to withstand the toughest terrain and hardest impacts. ⚡ Features: Hardened steel construction for maximum strength Precision fit for smooth suspension performance Direct replacement for stock parts Designed for high-stress off-road conditions 📦 Includes: (1) Hardened Steel Front Suspension Pin Set Compatibility: Traxxas Pro Scale Sand Car (Model #109076-4) Part #: 10940  

Read more less

Upgrade your Slash with the Traxxas Low Center of Gravity (LCG) Conversion Kit! This complete kit lowers the chassis, battery, and electronics for dramatically improved handling and faster cornering. Whether you’re on the race track or bashing off-road, the LCG kit gives your 2WD Slash superior balance and control. ⚡ Features: Complete kit – no extra parts required Lowers chassis by 1.3" (33mm) Battery sits 45% lower than stock configuration Optimized low-CG front shock springs included Genuine Traxxas precision engineering 📦 Includes: Blue LCG chassis Black nerf bars & lower chassis Battery hold down Optimized low-CG front shock springs Full hardware set Compatibility: Traxxas Slash 2WD Traxxas Ford Raptor Traxxas Robby Gordon Edition Dakar Slash Part #: 5830  

Read more less

Dial in your suspension with the Traxxas Black GTR 4.4 Rate Shock Springs. Designed for the Revo monster truck, these optional springs are stiffer than stock, providing extra support for heavier setups or more aggressive driving styles. ✅ Optional Heavy Rate Springs – Perfect for heavier configurations or aggressive bashing✅ High-Quality Spring Steel – Ensures consistent performance and durability✅ Durable Powder-Coated Finish – Long-lasting protection against wear and corrosion✅ Color-Coded – Black ends indicate 4.4 spring rate for easy identification Includes: (2) Black 4.4 Rate GTR Shock Springs Compatibility: Traxxas Revo (with GTR shocks) May also fit other vehicles using GTR shock assemblies (check manual for exact fitment) Part #: 5441

Read more less

The Traxxas Green GTR 3.5 Rate Shock Springs are the standard rear springs included with the Revo monster truck. Measuring 90mm, these springs are designed for use with the Progressive 1 rocker suspension system, offering balanced performance for a wide range of driving conditions. ✅ Standard Rear Springs – Stock replacement for Revo with 90mm Progressive 1 suspension✅ High-Quality Spring Steel – Consistent performance and long-lasting durability✅ Durable Powder-Coated Finish – Protects against wear and corrosion✅ Color-Coded – Green ends identify the 3.5 spring rate for easy tuning Includes: (2) Green 3.5 Rate GTR 90mm Rear Shock Springs Compatibility: Traxxas Revo (rear, with GTR shocks and 90mm Progressive 1 suspension) May also fit other GTR shock-equipped vehicles (check manual for exact fitment) Part #: 5438  

Read more less

Fine-tune your suspension with the Traxxas GTR 3.2 Rate Shock Springs. Designed for the Revo monster truck, these optional orange-coded springs are slightly stiffer than stock, delivering improved handling and control across most track conditions. ✅ Optimized for Racing – Recommended by Steve Slayden for Revo racing setups✅ Durable Powder-Coated Finish – Resists chipping and corrosion✅ High-Quality Spring Steel – Provides long-lasting, consistent performance✅ Color-Coded – Orange ends mark the 3.2 spring rate for quick identification Includes: (2) Orange 3.2 Rate GTR Shock Springs Compatibility: Traxxas Revo (with GTR shocks) Also fits other models using GTR shock assemblies (check manual for exact fitment) Part #: 5437  

Read more less

Upgrade or replace your chassis with the Traxxas Slash 2WD LCG (Low Center of Gravity) Chassis in blue. Designed as a direct replacement for the Traxxas Slash 2WD LCG Conversion Kit (TRA5830), this chassis lowers the truck’s center of gravity for improved handling and cornering performance. ✅ LCG Design – Lowers center of gravity for better stability and tighter cornering✅ Direct Replacement – OEM part for Slash 2WD LCG Conversion Kit (#5830)✅ Durable Construction – Built from high-quality composite material✅ Blue Finish – Adds a custom look to your Slash 2WD build Includes: (1) Blue Slash 2WD LCG Chassis – Part #5832A Compatibility: Traxxas Slash 2WD (when using LCG Conversion Kit #5830) Lower, stronger, and race-ready — the Traxxas 5832A Blue LCG Chassis gives your Slash 2WD the edge on the track.  

Read more less

Keep your drivetrain smooth and reliable with the Traxxas Rear Differential Ring and Pinion Gear Set. Designed for the Mini Maxx and Mini XRT, this set includes the 47-tooth ring gear and 12-tooth input pinion gear to restore differential performance. ✅ Direct Replacement – OEM fit for Mini Maxx and Mini XRT rear differential✅ Durable Construction – Built to handle high torque and hard bashing✅ Complete Set – Includes both ring gear and input pinion gear✅ Note: Pinion gear is not compatible with optional center differential or slipper clutch Includes: (1) 47T Ring Gear (1) 12T Input Pinion Gear Compatibility: Traxxas Mini Maxx Traxxas Mini XRT Restore smooth, efficient power transfer with the Traxxas 10779 Ring & Pinion Gear Set — tough enough for extreme 1/10 monster truck action.  

Read more less

The Traxxas 5117A Ball Bearings are a direct replacement set designed to keep your vehicle running smooth and efficient. These high-quality bearings reduce friction, improve drivetrain performance, and extend component life. ✅ OEM Replacement – Perfect fit and finish for Traxxas vehicles✅ Improves Efficiency – Reduces rolling resistance for smoother operation✅ Durable & Reliable – Built to withstand the demands of RC use Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117A Keep your Traxxas vehicle race-ready with the 5117A Ball Bearings — simple, effective, and essential.

Read more less

Boost your Traxxas vehicle’s performance with the Stinger 540 20-Turn Electric Motor. A mild modified motor, the Stinger delivers a solid balance of speed, torque, and runtime, making it a great upgrade or replacement option for your 1/10 Traxxas models. ✅ 20-Turn Single Design – Wound for balanced speed and torque✅ Durable & Reliable – Built to handle everyday bashing and racing✅ Great All-Around Choice – Strong acceleration with good top speed✅ Perfect Replacement – Direct fit for Traxxas models using 540-size brushed motors How It Works: 20 Turns (Single Wind): Wire is wound 20 times around the armature for balanced power output. Speed vs. Torque: Fewer turns = higher speed, more turns = more torque. The Stinger’s 20T design provides a middle ground. Setup Matters: Proper gearing and quality batteries are essential to unlock maximum performance. Specifications: Motor Size: 540 Turns: 20T (Single) Application: 1/10 Traxxas vehicles (direct replacement for brushed setups) The Traxxas Stinger 540 (20T) is a tried-and-true motor that gives you dependable performance whether you’re bashing, racing, or just running for fun.    

Read more less

Oil, shock (50 wt, 600 cSt, 60cc) (silicone)

Read more less

🔋 Traxxas EZ-Peak 2S Single Completer Pack (Charger + 5800mAh LiPo) Looking to power up your Traxxas vehicle the easy way? The EZ-Peak Completer Pack includes the trusted Traxxas EZ-Peak Plus iD Charger and a powerful 5800mAh 2S 25C LiPo battery — perfect for most 2S-compatible Traxxas RTR models. 💡 No complicated setup. Just plug in and go! ⚡ What's Inside: (1) Traxxas EZ-Peak Plus Charger (TRA2970) (1) 5800mAh 2S 25C LiPo Battery w/iD (TRA2843X) 🔌 Charger Features: iD Auto Battery Recognition for safe, easy charging Charges 2S–3S LiPo or 5–8 cell NiMH batteries Up to 4A fast charging (40W Max) Built-in balance ports — no balance boards needed Storage Mode to extend battery life Compact and reliable with AC power input 📐 Charger Specs: Input: 100–240V AC Output: 1.0–4.0A (40W Max) Dimensions: 146 x 123 x 53mm Weight: 365g 🔋 Battery Specs (TRA2843X): Type: 2S LiPo Capacity: 5800mAh Continuous Discharge: 25C (145A) Max Burst Rate: 50C (290A) Voltage: 7.4V Dimensions: 137 x 25 x 43mm Weight: 308g iD-equipped for use with Traxxas iD chargers ✅ Perfect For:Anyone who needs a complete 2S battery and charging solution for their Traxxas vehicle — especially for models like the Slash, Rustler, Bandit, Stampede, and more.

Read more less

  Keep your TRX-4M running strong with this genuine Traxxas 2S LiPo battery! Compact, lightweight, and built for performance, it delivers consistent 7.4V power and 750mAh capacity with a 20C discharge rate—perfect for extended crawling adventures. ✅ Capacity: 750mAh✅ Voltage: 7.4V (2S)✅ Discharge Rate: 20C✅ Connector: Traxxas High-Current✅ Compatible With: TRX-4M Engineered by Traxxas for optimal runtime, reliability, and fit in your TRX-4M.

Read more less

Oil, shock (40 wt, 500 cSt, 60cc) (silicone)

Read more less

Traxxas 4mm Aluminum Flanged Serrated Locknuts (4-Pack) Part #: 1747G / 1747R / 1747T / 1747A / 1747PAvailable Colors: Green, Red, Blue, Black, Purple Add both function and flair to your RC build with Traxxas Aluminum 4mm Flanged Locknuts! These serrated, anodized locknuts offer a lightweight, high-strength upgrade that resists loosening from vibration—perfect for racers and bashers alike. 📦 Includes: (4) 4mm Aluminum Flanged Serrated Locknuts (choose color) ✅ Features: CNC-machined from lightweight 6061-T6 aluminum Anodized finish for brilliant color and corrosion resistance Serrated flange helps grip plastic or metal surfaces securely Adds a high-performance, custom look to your RC rig Fits standard 4mm threaded axles and components Compatible with most Traxxas 1/10 scale vehicles 🎨 Dress up your build and lock in performance—available in multiple colors to match your style!

Read more less

Power up your ride with serious runtime and punch! The Traxxas Power Cell 7600mAh 2S LiPo delivers high-capacity performance with rugged construction and easy plug-and-go charging through the Traxxas iD system. 🔋 7.4V / 7600mAh / 25C Continuous🔌 iD Connector for safe, simple charging🔥 Max Burst Rate: 50C (380A)⚡ Maxx Cable 12AWG wiring for low resistance🏁 Optimized fit for Traxxas models like Slash & Slash 4x4💡 Semi-rigid construction – no hard case needed Dimensions: 155x27x43mmWeight: 390g ⚠️ Note: Must be charged with a Traxxas iD charger only. The go-to battery for racers and bashers who want dependable power, long runtimes, and Traxxas factory fit and finish.  

Read more less

Oil, shock (60 wt, 700 cSt, 60cc) (silicone)

Read more less

Traxxas Titan 550 Size Motor (12T) – Part #3785🔥 Big Power. Bold Performance. The Traxxas Titan 12T 550 Brushed Motor delivers massive torque and reliable performance for your RC adventures. Whether you're tearing up trails or bashing in the backyard, this motor is built to handle the heat—literally—with an integrated cooling fan that helps extend run times and reduce wear. A perfect drop-in replacement for Traxxas models using a 12-turn brushed motor. ✅ High-torque 550 size brushed motor✅ 12-turn design for powerful acceleration✅ Built-in cooling fan for longer run times✅ Factory-installed leads for easy installation✅ Ideal replacement for many Traxxas 1/10 scale vehicles 📦 Includes: (1) Titan 550 12T Brushed Motor 💡 Pro Tip: For best results, pair with the Traxxas XL-5 ESC and a properly geared transmission to balance speed and runtime.  

Read more less

Keep your rear suspension solid with these replacement stub axle carriers from Traxxas! Designed for VXL models, these carriers mount directly to the rear suspension arms and provide critical support for your axle stubs. 🔧 OEM-quality replacement🔧 Fits Traxxas VXL models🔧 Easy install – bolt-on compatibility Includes: 2x Stub Axle CarriersPart Number: 3752 Perfect for getting your Traxxas ride back in action or keeping a spare set on hand!    

Read more less

Traxxas Steering Blocks (2) – VXLPart #: 3736 Keep your front end running strong with these genuine Traxxas replacement steering blocks. Designed to fit Traxxas 2WD vehicles, including VXL models, these steering blocks mount to the front uprights and support the front axles for smooth, responsive steering. Features: Durable OEM replacement parts Supports front axle for precise steering Compatible with Traxxas 2WD models like Rustler, Stampede, and Slash Direct fit – no modifications required Includes: (2) Steering Blocks

Read more less

Get the performance and reliability you expect from Traxxas with the 5800mAh Power Cell 2S LiPo—a perfect balance of power, runtime, and safety for your Traxxas vehicle. 🔋 7.4V / 5800mAh / 25C Continuous Discharge🔌 Exclusive Traxxas iD Connector for simple, safe charging⚡ Max Burst Rate: 50C (290A)💪 Hard-wired 12AWG Maxx Cable for low resistance🏁 Designed for a perfect fit in Traxxas vehicles Dimensions: 137x25x43mmWeight: 308g ⚠️ Requires Traxxas iD charger only. Do not charge with any non-Traxxas charger. Boost your bash time with dependable power, rugged construction, and high-output delivery—Traxxas style.

Read more less

Traxxas 5x11x4mm Ball Bearings (2) – Part 5116Smooth Operation. Built to Last. The Traxxas 5x11x4mm Ball Bearings are a direct replacement for worn-out or damaged bearings in a variety of Traxxas vehicles. Designed for low-friction rotation and long-lasting performance, these bearings are perfect for keeping your drivetrain, hubs, or transmission running like new. ✅ Includes 2 ball bearings✅ Size: 5x11x4mm – fits many Traxxas applications✅ Precision construction – reduces rolling resistance and wear✅ Great for wheels, transmissions, and steering systems✅ OEM replacement quality – trusted fit and durability 📦 Includes: (2) 5x11x4mm Ball Bearings Part #: 5116 💡 Pro Tip: Replace bearings in pairs for balanced performance and reduced vibration.

Read more less

Oil, shock (30 wt, 350 cSt, 60cc) (silicone)

Read more less

Overview:Charge two batteries at once with the Traxxas EZ-Peak Dual 8-Amp Charger. Delivering up to 100 watts (8 amps) of charging power per side, this smart charger is designed to keep you running longer with less downtime. With Traxxas iD technology, charging is simple—just plug in any Traxxas iD battery and the charger automatically detects type, cell count, and capacity, then configures settings for a safe, optimized charge. Perfect for NiMH and LiPo packs, the EZ-Peak Dual includes advanced safety features, balance charging for LiPos, and intuitive LED indicators to keep you fully informed while charging. Features: Dual charging ports – charge two batteries at once 100W, 8A output per channel for fast charging Traxxas iD Auto-Battery Identification simplifies setup Compatible with NiMH and LiPo Traxxas iD batteries Advanced balance charging for LiPo packs LED status indicators for easy monitoring Built-in safety features for worry-free charging Compatibility: Charges all Traxxas iD-equipped batteries (NiMH and LiPo) Compatible with 5-8 cell NiMH and 2S–4S LiPo iD packs Works with popular Traxxas models including Slash, Rustler, Stampede, E-Revo, X-Maxx, and more Includes: (1) EZ-Peak Dual 8-Amp Charger Part Number: 2972

Read more less

Traxxas 12mm Hex Stub Axle Pin & Collar Set Part #: 1654 | Replacement Wheel Hub Set The Traxxas 1654 Stub Axle Pin & Collar Set is a direct replacement for worn or lost hex hubs and axle pins on a wide range of Traxxas vehicles. This kit includes two 12mm hex wheel hubs and four axle pins, ensuring a secure fit for your wheels and reliable power transfer to the ground. 📦 Includes: (2) 12mm Hex Wheel Hubs (4) Stub Axle Pins ✅ Compatibility: Fits most Traxxas 1/10 scale vehicles with 12mm hexes Commonly used in Slash, Rustler, Stampede, and others Always refer to your model’s manual to confirm compatibility.

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Traxxas 48P Spur Gear (86T)Part #: 4686 Fine-tune your gearing with this optional 48-pitch, 86-tooth spur gear from Traxxas. Whether you're looking to optimize for more torque or higher top-end speed, this precision-molded gear delivers consistent performance and smooth power delivery. Features: Optional 48-pitch 86-tooth spur gear Ideal for adjusting gear ratios for better torque or speed Durable molded construction Genuine Traxxas quality and reliability Includes: (1) 86T 48P Spur Gear Note: Be sure to verify pitch compatibility with your pinion gear before installing.

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Traxxas Front Extreme Heavy Duty Driveshaft – Rustler 4X4 – Part 6851ABeefed-Up Strength. Bolt-On Simplicity. The Traxxas 6851A Extreme Heavy Duty Front Driveshaft Assembly is built to handle high-power brushless setups and intense off-road abuse. Pre-assembled and ready to drop in, this driveshaft fits either the left or right front side of your Rustler 4X4. ✅ Fits front left or right side – fully interchangeable✅ Extreme Heavy Duty design – upgraded strength over stock✅ Fully assembled for fast installation✅ Ideal for high-torque applications and heavy bashing✅ Includes screw pin for secure mounting 📦 Includes: (1) Assembled Front Driveshaft (Left or Right) (1) Screw Pin Part #: 6851A Fits: Rustler 4X4 Rustler 4X4 VXL Also compatible with Slash 4X4, Stampede 4X4, and others using the Extreme HD upgrade system 💡 Pro Tip: Upgrade all four corners with Extreme HD shafts for a bulletproof driveline that’s ready for anything.

Read more less