Team Associated 13mm Front Shock Spring (White/4.40lbs) (54mm) [71160]🛠️ Tuned for precision. Built for performance.Upgrade your T6.2 or SC6.2 with these 13mm Front Shock Springs and feel the difference! Rated at 4.40 lbs/in and measuring 54mm, these white springs deliver buttery-smooth handling with serious jump support. Soft in the corners, firm on impact—just how you want it.💥 Features:✅ White rate: 4.40 lbs/in✅ Length: 54mm✅ Designed for 13mm shocks✅ Optimized for balance between grip and control✅ Includes 2 springs📦 Part Number: 71160🏁 Brand: Team Associated

Read more less

🔋🔌 A Simple Solution for 4S LiPo Balance ConnectionsThe ProTek RC 4S LiPo Charge/Balance Adapter is designed to provide an XH female to XH female connection for compatible 4S LiPo charging and balancing setups. It’s a handy addition to the pit box when you need to adapt between compatible XH balance connections.🔋 About the 4S LiPo Charge/Balance Adapter🔌 XH Female to XH FemaleThis adapter features an XH female connector on each end, allowing compatible 4S balance connections to be joined without modifying your existing wiring.⚙️ Made for 4S LiPo ApplicationsDesigned specifically for compatible 4S LiPo battery balance connections, making it useful for charging setups that require a female-to-female XH adapter.🧰 Great for the Pit BoxSmall charging adapters are easy to need and not have. Keeping the correct adapter on hand can make setting up your charger at home or at the track much easier.✨ Features✔ Designed for 4S LiPo applications✔ XH female connector on both ends✔ Provides a female-to-female balance connection✔ Compact and easy to keep in your charging gear✔ Useful for compatible charging and balancing setups✔ Genuine ProTek RC accessory📦 Includes (1) ProTek RC 4S LiPo Charge/Balance Adapter🔧 Compatibility Compatible 4S LiPo charging and balance setups using XH connections📝 Notes Verify your battery and charger balance connector type before use. This adapter is intended for the balance connection and does not replace the battery’s main charge lead.

Read more less

🏁⚙️ Factory Team Carbon Upgrade for the 7-Series DrivetrainThe Team Associated Factory Team Carbon 3-Gear Gearbox is an optional drivetrain component designed for compatible RC10B7, RC10T7, and RC10SC7 platforms using the 3-gear transmission configuration. Its carbon-composite construction provides a lightweight, rigid gearbox option for race-focused builds. 🏁 About the Factory Team 3-Gear Gearbox⚙️ 3-Gear Transmission DesignDesigned specifically for Team Associated’s 3-gear transmission layout, this gearbox provides the housing needed for compatible 7-series drivetrain setups.🔧 Carbon-Composite ConstructionThe Factory Team gearbox uses carbon-composite material for a lightweight and rigid construction while maintaining proper drivetrain alignment.🏎️ Factory Team UpgradeIdeal for racers building, converting, or servicing a compatible Team Associated 7-series vehicle with the 3-gear gearbox configuration.✨ Features✔ Factory Team carbon-composite construction✔ Designed for 3-gear transmission configurations✔ Lightweight and rigid gearbox design✔ Genuine Team Associated Factory Team component✔ Designed for compatible RC10 7-series platforms📦 Includes (1) Team Associated Factory Team Carbon 3-Gear Gearbox Set🔧 Compatibility Team Associated RC10B7 Team Associated RC10B7.1 Team Associated RC10T7 Team Associated RC10SC7 📝 Notes This is the Factory Team carbon-composite version of the 3-gear gearbox. Verify your vehicle is configured for the compatible 3-gear transmission setup before installation.  

Read more less

🏁⚙️ Sharpen Up Your Rear Suspension ResponseThe Aerox Long 1/10 Off-Road Rear Agile Spring Tuning Set is designed for racers looking for sharp, responsive handling and precise suspension control. Engineered by Schumacher, this four-pair tuning set gives you a range of rear spring options for dialing in your buggy as track conditions and grip levels change.🏁 About the Agile Rear Spring Set⚡ Sharp & Responsive HandlingAerox Agile springs are designed to deliver quick response and flatter cornering characteristics, making them a great tuning option for faster layouts and conditions where a responsive chassis is preferred.⚙️ Fine Suspension TuningClosely spaced spring-rate increments allow for small, precise setup changes, helping racers fine-tune rear traction, chassis roll, and overall responsiveness.🔧 Long Length Rear SpringsThis set features Long rear springs for compatible 1/10 off-road buggy applications, with easy identification between the different spring options for quick setup changes at the track.✨ Features✔ Four pairs of Long rear springs✔ Agile spring characteristics for sharp handling✔ Designed for flatter, responsive cornering✔ Allows precise suspension setup changes✔ Close spring-rate increments for fine tuning✔ Designed for 1/10 off-road buggy applications✔ Eight individual springs included📦 Includes (4) Pairs Aerox Long 1/10 Off-Road Rear Agile Springs (8) Individual Springs Total📝 Tuning Notes Softer springs: Increase chassis roll and traction, perform better in bumpy conditions, and are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This is the Long Rear Agile tuning set.

Read more less

🏁⚙️ Sharpen Up Your Front-End ResponseThe Aerox Medium 1/10 Off-Road Front Agile Spring Tuning Set is designed for racers looking for sharp, responsive handling and precise suspension control. Engineered by Schumacher and tested by top drivers, these springs provide four pairs of tuning options to help dial in your buggy for changing track conditions.🏁 About the Agile Front Spring Set⚡ Sharp & Responsive HandlingAerox Agile springs are designed to provide quick, precise response with flatter cornering characteristics, making them especially well suited for faster track layouts where sharp handling is key.⚙️ Fine Suspension TuningConstant wire diameter and closely spaced spring-rate increments allow racers to make small, controlled suspension changes rather than large jumps between setups.🔧 Medium Length Front SpringsThis set features Medium length front springs designed for compatible 1/10 off-road buggy applications. Color coding makes the different spring options easy to identify when making setup changes at the track.✨ Features✔ Four pairs of Medium front springs✔ Agile spring characteristics for sharp handling✔ Designed for flatter, responsive cornering✔ Engineered by Schumacher✔ Tested by top-level drivers✔ Constant wire diameter for consistent performance✔ Close rate increments for precise tuning✔ Color coded for easy identification✔ Designed for 1/10 off-road buggy applications📦 Includes (4) Pairs Aerox Medium 1/10 Off-Road Front Agile Springs (8) Individual Springs Total🔧 Compatibility Schumacher CAT K1 Schumacher CAT K1 Aero Schumacher CAT K2 Schumacher CAT L1 Schumacher CAT SX2 Schumacher CAT SX3 Schumacher Cougar KF Schumacher Cougar KF2 Schumacher Cougar KF2 SE Schumacher Cougar KR Schumacher Cougar LD2 Schumacher Cougar Laydown Schumacher Cougar SV Schumacher Cougar SV2 Schumacher Cougar SVR Schumacher Storm ST📝 Tuning Notes Softer springs: Increase chassis roll and traction, perform better in bumpy conditions, and are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This is the Medium Front Agile tuning set.

Read more less

🏁⚙️ Dial In Your Suspension with Seven Spring RatesThe Core RC High Response Medium Spring Tuning Set gives racers a convenient range of suspension springs for fine-tuning their off-road setup. With seven pairs of springs included, this tuning set makes it easy to adjust suspension response as track conditions and grip levels change.🏁 About the High Response Spring Tuning Set⚙️ Seven Pairs for Fine TuningWith seven different pairs included, racers can make smaller spring changes to dial in chassis balance, traction, and responsiveness without needing to purchase each pair separately.🏎️ High Response DesignCore RC High Response springs are designed to provide responsive suspension performance, giving racers additional control over how the chassis reacts through corners, bumps, and quick direction changes.🔧 Medium Length SpringsThis is the Medium length High Response tuning set, designed for compatible off-road buggy big bore shock applications requiring medium-length springs.✨ Features✔ High Response spring design✔ Medium length configuration✔ Seven pairs of springs included✔ Allows precise suspension tuning✔ Helps tune traction, chassis roll, and responsiveness✔ Designed for off-road racing applications✔ Convenient complete tuning set📦 Includes (7) Pairs Core RC Medium High Response Springs (14) Individual Springs Total📝 Tuning Notes Softer springs: Increase chassis roll and traction and can work better in bumpy conditions. Stiffer springs: Reduce chassis roll and provide increased responsiveness. This is the Medium length spring tuning set. Individual spring rates were not provided in the supplied product information, so they are not listed here.

Read more less

🏁⚙️ Fine-Tune Your Suspension with High Response SpringsThe Core-RC Long Length High Response Spring Tuning Set was developed by Schumacher engineers and top-level drivers across a wide range of track conditions, from low-grip dirt to high-grip carpet. Designed for off-road buggies using big bore shocks, these springs provide increased responsiveness while allowing racers to make precise suspension adjustments with closely spaced spring rates.🏁 About the High Response Spring Tuning Set⚙️ Four Spring Rates for Precise TuningThe set includes four different spring rates ranging from 2.0 to 2.6 lb/in, allowing small, controlled setup changes to suit changing grip levels, track conditions, and driving preferences.🏎️ High Response DesignCompared with alternative CORE RC and Schumacher Big Bore Springs, the High Response design uses fewer coils and a thinner wire diameter to improve responsiveness while reducing weight.🔧 Lightweight & ConsistentThe High Response springs provide an average weight savings of approximately 4 grams per pair compared with previous CORE RC springs. Constant wire diameter, precision-ground ends, and close rate increments help provide consistent performance and accurate tuning.✨ Features✔ Four spring rates included for suspension tuning✔ Developed for off-road buggy racing✔ Tested from low-grip dirt to high-grip carpet✔ High Response design for improved responsiveness✔ Fewer coils and thinner wire diameter✔ Approximately 4g average weight savings per pair✔ Close spring-rate increments for fine adjustments✔ Constant wire diameter✔ Precision-ground ends✔ Black-coated springs with easy rate identification✔ Designed for rear big bore shock applications📦 Includes (2) CR808 Long Red High Response Springs – 2.0 lb/in (2) CR809 Long Green High Response Springs – 2.2 lb/in (2) CR810 Long Blue High Response Springs – 2.4 lb/in (2) CR811 Long Black High Response Springs – 2.6 lb/in🔧 CompatibilityDesigned for rear big bore shock applications including: Schumacher Cougar Laydown Schumacher CAT L1 EVO Other compatible vehicles using big bore shocks📝 Tuning Notes Softer springs: Increase chassis roll and traction, work better in bumpy conditions, but are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This set includes 8 individual springs total — two of each of the four spring rates.

Read more less

🏁🔧 Precision Spacing for Your XRAY SetupThe XRAY Aluminum Shim Set is a genuine tuning and replacement option designed for precise spacing and adjustment on compatible RC applications. Measuring 3x5x1.0mm, these lightweight aluminum shims feature XRAY's signature orange finish and are supplied in a convenient pack of ten.🏁 About the Aluminum Shim Set⚙️ Precision Setup AdjustmentsThese 1.0mm thick shims provide a simple way to make precise spacing adjustments wherever the 3x5mm shim size is required.🔧 Aluminum ConstructionMade from aluminum for a lightweight and durable setup solution, each shim features an orange finish for the classic XRAY factory look.🏎️ Perfect for the Parts BoxWith ten shims included, this set is a handy addition to any XRAY racer's pit box for maintenance, rebuilds, and setup changes.✨ Features✔ Genuine XRAY tuning hardware✔ Aluminum construction✔ 3x5x1.0mm size✔ 1.0mm thickness✔ Orange finish✔ Ideal for precision spacing and setup adjustments✔ Ten shims included📦 Includes (10) 3x5x1.0mm Aluminum Shims – Orange📝 Notes Genuine XRAY replacement/tuning hardware. Verify the required shim dimensions for your specific application before installation.

Read more less

🏁⚙️ Tune Rear Hub Flex for Changing Track ConditionsThe XRAY HARD Composite Rear Upright is an optional tuning component designed to give racers another way to fine-tune rear suspension feel. Featuring the upper mounting position and XRAY's HARD composite material, changing rear hub material allows you to alter the amount of flex in the upright to better suit different track conditions and handling preferences.🏁 About the HARD Composite Rear Upright⚙️ Rear Hub Flex TuningChanging the rear upright material influences the amount of flex in the hub assembly, giving racers another useful setup adjustment for changing grip levels and track conditions.🔧 HARD Composite ConstructionThis version is molded from XRAY's HARD composite material for a firmer hub option and is designed with the upper mounting position.🏎️ Built for Setup OptionsWhether you're adapting to carpet, dirt, or changing track grip, XRAY's interchangeable upright options allow you to further fine-tune the rear of your buggy or truck.✨ Features✔ Genuine XRAY optional tuning part✔ HARD composite construction✔ Upper position rear upright✔ Allows rear hub flex tuning✔ Helps fine-tune handling for different track conditions✔ One rear upright included📦 Includes (1) HARD Composite Rear Upright – Upper Position🔧 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB4 2019 XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XT2 2021 Carpet XRAY XT4📝 Notes This is the HARD composite, upper-position version. Package includes one rear upright. Genuine XRAY optional tuning component.

Read more less

🏁⚙️ Fine-Tune Your XB2 Chassis FlexThe XRAY Short Composite Front Chassis Side Brace is a genuine tuning component originally designed for the XB2 2018 Carpet platform. The shorter design allows installation of the updated graphite side guard braces, giving racers an additional way to adjust front chassis flex and dial in handling for different track conditions.🏁 About the Short Front Chassis Side Brace⚙️ Adjustable Chassis FlexThe shorter front brace design works with XRAY's updated graphite side guard braces, allowing racers to tune front chassis flex as part of their overall setup.🔧 Composite ConstructionMade from composite material, these braces provide proper fit and function while allowing the chassis and side guard system to work together as intended.🏎️ Built for TuningChanging chassis flex can help racers adapt their setup for different surfaces and grip levels, making these short braces a useful tuning option for compatible XB2 and XT2 platforms.✨ Features✔ Genuine XRAY tuning parts✔ Short front chassis side brace design✔ Composite construction✔ Allows installation of updated graphite side guard braces✔ Provides additional front chassis flex adjustment options✔ Two braces included📦 Includes (2) Short Composite Front Chassis Side Braces🔧 Compatibility XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt📝 Notes Updated graphite side guard braces are sold separately. Genuine XRAY replacement/tuning parts.

Read more less

🏁🔧 Refresh Your XB4 Shocks with Genuine XRAY ComponentsThe XRAY Composite Shock Part Set is a genuine replacement parts package designed for the XRAY XB4 1/10 4WD buggy. This convenient set includes the key composite components needed to replace worn or damaged parts on two shock assemblies.🏁 About the Composite Shock Part Set⚙️ Complete Shock ComponentsThe set includes two shock caps, two spring cups, and two shock rod ends, making it an easy way to replace several commonly used shock components at once.🔧 Composite ConstructionXRAY's composite components provide the proper fit and function required for smooth, reliable shock operation.🏎️ Made for the XB4Designed specifically for the XRAY XB4 platform, these genuine replacement parts provide direct-fit compatibility with the factory shock assemblies.✨ Features✔ Genuine XRAY replacement parts✔ Composite construction✔ Replacement components for two shocks✔ Includes shock caps, spring cups, and rod ends✔ Direct-fit replacement for the XRAY XB4📦 Includes (2) Shock Caps (2) Spring Cups (2) Shock Rod Ends🔧 Compatibility XRAY XB4 1/10 4WD Buggy📝 Notes Genuine XRAY replacement parts. Includes composite shock components only. Shocks and other suspension components are sold separately.

Read more less

🏁⚙️ Strength, Precision & a Clean Race-Ready LookThe J&T Bearing Co. Titanium "Milled" XD Turnbuckle Set is a premium upgrade designed specifically for the 2025 XRAY XB2 Carpet and Dirt platforms. Made from high-quality Grade 5 titanium, these turnbuckles combine increased strength and durability with a sleek milled design that gives your buggy a sharp, finished appearance.🏁 About the Titanium "Milled" XD Turnbuckles💪 Reinforced for RacingThe XD design features a reinforced 4mm center for increased durability compared to standard finned-style turnbuckles, making them well suited for the demands of competitive racing.🔧 Milled Titanium ConstructionEach turnbuckle features a 3.5mm milled center that tapers down for a clean, timeless look. Grade 5 titanium construction provides an excellent combination of strength and lightweight performance.⚙️ Stock-Style ThreadingStandard right and left-hand threads allow the turnbuckles to work with the stock rod ends. A 1/8" drill bit is included for modifying the standard rod ends if required for proper fitment.✨ Features✔ Grade 5 titanium construction✔ Reinforced 4mm center for increased durability✔ 3.5mm milled center design✔ Standard right and left-hand threads✔ Compatible with stock rod ends✔ 1/8" drill bit included for rod end modification if needed✔ Black finish✔ Designed specifically for the 2025 XRAY XB2📦 Includes (1) XRAY XB2 '25 Titanium "Milled" XD Turnbuckle Set (1) 1/8" Drill Bit🔧 Compatibility XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt📝 Notes Stock rod ends may require modification using the included 1/8" drill bit. Vehicle and other components are sold separately.  

Read more less

The ProTek RC SG3 HV ULCG Shorty LiPo Battery combines a lightweight, ultra-low center of gravity design with low internal resistance and high-voltage Silicon Graphene technology. Designed with competitive 1/10 buggy racing in mind, this 4600mAh 2S pack delivers consistent power, improved efficiency, and cooler operating temperatures throughout the run. About the SG3 HV ULCG Shorty LiPo Battery High-Voltage Performance Featuring ProTek's third-generation Silicon Graphene high-voltage cell technology, this pack provides a 7.6V nominal voltage with a 150C peak discharge rating. Lower internal resistance helps improve efficiency and power delivery while reducing operating temperatures. Ultra-Low Center of Gravity The compact 18.5mm height and 155g weight help lower the vehicle's center of gravity and optimize weight balance for improved handling. The shorty configuration is well suited for both 2WD and 4WD 1/10 buggy racing. Race-Ready Connections The battery features 5mm bullet connections and a 2mm balance connection. Two 5mm-to-4mm bullet reducers are also included for additional setup flexibility. Features ✔ 7.6V 2S high-voltage LiPo configuration✔ 4600mAh capacity✔ 150C peak discharge rating✔ Low internal resistance (Low IR) design✔ SG3 third-generation Silicon Graphene technology✔ Ultra-low center of gravity (ULCG) shorty configuration✔ Designed for consistent power delivery and improved efficiency✔ Compact 18.5mm pack height✔ 5mm bullet battery connections✔ 2mm bullet balance connection✔ 5mm-to-4mm bullet reducers included✔ Ideal for 1/10 2WD and 4WD buggy racing✔ ROAR Approved Includes (1) ProTek RC 2S 150C Low IR SG3 HV ULCG Shorty LiPo Battery – 7.6V/4600mAh (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Needed to Complete LiPo-compatible balance charger capable of charging 2S high-voltage (LiHV) batteries Appropriate charging leads/connections for your charger LiPo-safe charging bag or container Specifications Specification Details Brand ProTek RC Part Number PTK-5124-26 Battery Type Silicon Graphene High-Voltage LiPo Configuration 2S1P Nominal Voltage 7.6V Capacity 4600mAh Peak Discharge Rate 150C Maximum Charge Rate 1.5C Watt Hours 34.9Wh Battery Connector 5mm Bullets Balance Connector 2mm Bullet Dimensions 47 x 96 x 18.5mm Weight 155g (5.4oz) ROAR Approved Yes Notes Always use a LiPo-compatible balance charger and LiPo-safe charging bag or container. Never leave LiPo batteries unattended while charging. Do not charge the battery while installed in the vehicle. Do not overcharge or over-discharge the battery. End voltage should not be allowed to drop below 3.2V per cell. Allow the battery to cool completely before recharging after use. Read and follow all battery and charger safety instructions before use.  

Read more less

The Team Exalt Gen-X Gold Spec 13.5T Competition Brushless Motor is engineered for racers looking for precise, consistent, and efficient power delivery. Built around an in-house designed stator, precision-balanced rotor, ceramic bearings, and a high-accuracy sensor system, the Gold Spec is designed to deliver predictable performance throughout demanding race conditions. Each Gold Spec motor receives hand-selected stator and rotor components, ≤1.0° sensor deviation, and individual Motolyser tuning with a performance printout, providing racers with a verified, race-ready motor. About the Gen-X Gold Spec Precision-Built Competition Performance The Gold Spec's in-house designed stator is optimized to produce strong torque while maintaining stable RPM and legal performance limits for sanctioned racing. A precision-balanced 12.5mm rotor works with ceramic bearings to reduce friction while providing crisp mid-range punch, clean throttle response, and consistent performance. Hand-Selected & Motolyser Tuned Gold Spec motors receive specialized attention during assembly, including selection of top-tier stator and rotor components. Each motor is built with ≤1.0° sensor deviation and individually Motolyser tuned. A performance printout is included to provide verified data for the specific motor. Advanced Cooling & Sensor Accuracy Integrated cooling channels and a rigid motor can structure help manage temperatures during longer races. A high-accuracy sensor system maintains clean communication between the motor and ESC for consistent throttle response from the beginning of the race through the final lap. Features ✔ Competition-level 13.5T sensored brushless motor✔ ROAR approved✔ In-house designed stator✔ Precision-balanced 12.5mm rotor✔ Ceramic bearings for reduced friction✔ Strong torque with stable RPM performance✔ Crisp mid-range power delivery✔ Advanced cooling channels✔ Rigid motor can construction✔ High-accuracy sensor system✔ Hand-built with selected stator and rotor components✔ ≤1.0° sensor deviation✔ Individually Motolyser tuned✔ Performance printout included Includes (1) Team Exalt Gen-X Gold Spec 13.5T Competition Brushless Motor (1) Sensor Cable (1) Motolyser Performance Printout Specifications Specification Details Brand Team Exalt Part Number EXAG135GS2 Series Gen-X Gold Spec Motor Type Sensored Brushless Turns 13.5T Input Voltage 2S Pole/Slot 2 Rotor Diameter 12.5mm Shaft Diameter 3.175mm (1/8") Bearings Ceramic Sensor Deviation ≤1.0° ROAR Approved Yes Notes Designed for competitive RC racing applications. Each Gold Spec motor is individually Motolyser tuned and supplied with a performance printout. Verify the motor and ESC requirements for your specific racing class or sanctioning organization before competition use.

Read more less

The Team Losi Racing 10x14mm Shim Set is a genuine replacement and setup component for compatible TLR and Losi 22-series vehicles. This set includes both 0.1mm and 0.2mm thicknesses, allowing for precise spacing and adjustment during vehicle setup, maintenance, or rebuilding. About the TLR Shim Set Precision Setup & Adjustment With two different shim thicknesses included, this set provides additional flexibility when making fine spacing adjustments. Each shim measures 10x14mm, with five 0.1mm and five 0.2mm shims included. Features ✔ Genuine Team Losi Racing replacement/setup parts✔ 10x14mm shim dimensions✔ Includes two shim thicknesses✔ 0.1mm and 0.2mm options✔ Allows precise spacing and adjustment✔ Ideal for maintenance, rebuilds, and vehicle setup✔ Ten total shims included Includes (5) 10x14x0.1mm Shims (5) 10x14x0.2mm Shims Specifications Specification Details Brand Team Losi Racing Part Number TLR236006 Product Type Shim Set Shim Size 10x14mm Thicknesses 0.1mm & 0.2mm Quantity 10 Total Compatibility Compatible with: Losi 22 4.0 SPEC-Racer Losi 22X Losi 22X-4 1.0 Losi 22X-4 Elite Losi 22X-T Notes Includes five shims of each thickness, for a total of 10 shims. Verify compatibility with your specific vehicle and application before installation.    

Read more less

The XRAY 2.5mm Graphite Steering Block Extension is a front-end tuning option designed to adjust Ackermann geometry and steering response. This 1-slot version provides a handling characteristic between XRAY's standard 2-slot extension and the more aggressive 0-slot version. About the Graphite Steering Block Extension Fine-Tune Steering & Ackermann XRAY designed these extensions to work on either the left or right steering block. The 1-slot configuration turns the outside wheel more than the 2-slot version, producing additional steering while remaining less aggressive than the 0-slot option. Features: Genuine XRAY optional tuning component 2.5mm graphite steering block extensions 1-slot Ackermann configuration Allows fine adjustment of steering characteristics More aggressive steering than the 2-slot configuration Less aggressive than the 0-slot configuration Can be used on left and right steering blocks Designed for tuning across different surfaces and track conditions Lightweight graphite construction Includes two extensions Includes: (2) XRAY Graphite Steering Block Extensions – 1 Slot Specifications: Manufacturer: XRAYPart Number: 322291Material: GraphiteThickness: 2.5mmConfiguration: 1 SlotPosition: Front SteeringQuantity: 2 Compatibility: ✅ XRAY XB2✅ XRAY XT2 XRAY's current XB2 documentation continues to list 322291 as the optional 1-slot steering block extension, alongside 322290 2-slot, 322292 0-slot, and 322293 3-slot configurations. 💡 Pro Tip: XRAY's Ackermann options let you tune how aggressively the car steers: 322290 – 2 Slot: Easier to drive, less aggressive322291 – 1 Slot: Middle-ground steering response322292 – 0 Slot: Most aggressive steering, suited to tight and technical layouts

Read more less

🏁 High-Grip Stability. Linear Response. Factory-Matched Performance. The XRAY 42mm 5-Dot Front Spring Set is designed specifically for XRAY big-bore shocks, providing a constant linear spring rate throughout compression for predictable and consistent suspension performance. XRAY identifies the 5-dot rating directly on the springs for quick setup identification. Each XRAY spring is individually measured, selected, and matched into pairs to ensure equal length and consistent performance between the left and right sides of your race car. ⚡ Features: 🏁 Genuine XRAY optional tuning springs⚙️ 5-Dot front spring rate📏 42mm length🎯 Linear spring design provides a constant rate throughout compression🔧 Specifically designed for XRAY big-bore shocks⚖️ Individually measured and matched into pairs🚀 Provides additional suspension setup options🔥 XRAY notes the 5-dot spring can improve front stability and overall handling on very high-grip tracks 📦 Includes: (2) XRAY 42mm 5-Dot Front Springs 📏 Specifications: Part Number: 368195Position: FrontLength: 42mmSpring Type: LinearIdentification: 5 DotsQuantity: 2 🔧 Compatibility: Used across multiple XRAY 1/10 off-road platforms, including various: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT2 Fitment spans numerous generations, so racers should confirm the 42mm front spring configuration used on their specific model before ordering. 💡 Pro Tip: The 5-Dot is a setup spring, not simply a replacement spring. XRAY specifically notes that this spring can provide better front stability and overall handling in very high-grip conditions, making it a useful tuning option for carpet and other high-traction surfaces.

Read more less

 🏁 Lightweight. Precise. Factory XRAY Steering Performance The XRAY Composite Steering Arms are genuine replacement steering components designed for XRAY's 1-piece chassis steering system. XRAY's factory manuals identify 322515 as the HARD composite steering arms included with the vehicle, with aluminum 322516 arms available as the optional upgrade. Designed for smooth, precise steering operation, these composite arms provide the factory steering characteristics intended by XRAY while keeping the steering assembly lightweight. ⚡ Features: 🏁 Genuine XRAY replacement parts💪 Hard composite construction🪶 Lightweight steering system design🎯 Designed for precise and consistent steering operation⚙️ Specifically designed for XRAY's 1-piece chassis configuration🔧 Direct replacement for the factory steering arms🏎️ Competition-ready factory specification🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Composite Steering Arms 📏 Specifications: Part Number: 322515Material: Hard CompositeQuantity: 2Position: Front SteeringApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Verified XRAY documentation shows 322515 used on: ✅ XRAY XB2 2024 Carpet✅ XRAY XB2 2024 Dirt ✅ XRAY XB2 2025 Dirt ✅ XRAY XT2 2024 Important: This part is specifically associated with the newer 1-piece chassis steering configuration, so I would not advertise it as fitting older XB2 generations universally. One parts source specifically lists it as incompatible with XB2 2022 and 2023 models. 💡 Pro Tip: If you're looking for a stronger, more rigid steering setup, XRAY offers 322516 Aluminum Steering Arms as the optional upgrade. XRAY states that the aluminum arms increase strength and reliability while improving steering precision and feel.

Read more less

 🏁 Lower Shocks. More Rear Traction. Serious Setup Tuning. The XRAY Aluminum Rear Shock Absorber Adapter Set is a performance tuning upgrade designed to mount the rear shocks lower on the suspension arms. Lowering the shock mounting position helps lower the center of gravity and generate additional rear traction, particularly on high-grip carpet and Astro tracks. Two mounting configurations allow the shocks to be positioned toward the inside or outside, giving racers another way to fine-tune rear suspension behavior. ⚡ Features: 🏁 Genuine XRAY performance option⬇️ Allows rear shocks to mount lower on the suspension arms🎯 Helps generate increased rear traction⚖️ Lowers the vehicle's center of gravity🔧 Inside or outside shock mounting options➡️ Arrow markings make mounting positions easy to identify💪 CNC-machined from premium Swiss 7075-T6 aluminum🪶 Lightweight and extremely durable construction⚫ Black anodized finish🏎️ Especially recommended for carpet and Astro surfaces🔩 Includes +2mm and +4mm longer shock ball joints 📦 Includes: (1) XRAY Rear Shock Absorber Adapter Set (1+1) +2mm Longer Shock Ball Joint +4mm Longer Shock Ball Joint 📏 Specifications: Part Number: 362390Material: Swiss 7075-T6 AluminumFinish: Black AnodizedPosition: RearApplication: Lower Shock Mounting / Suspension Tuning 🔧 Compatibility: XRAY documentation confirms 362390 across multiple current and recent platforms, including: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT4 XRAY's XB2 documentation specifically lists the 362390 adapter, and current XB4 documentation also shows it in the rear shock assembly. 💡 Pro Tip: This isn't just a replacement part—it's a setup option. Moving the rear shock mounting point lower can increase rear traction and lower CG, which is why XRAY particularly recommends these adapters for carpet and Astro racing. The two mounting alternatives give you additional flexibility when dialing in the rear of the car.

Read more less

 🏁 Precision Machined. Ultra-Durable. Genuine XRAY Performance. The XRAY Front Drive Axle is a genuine replacement drivetrain component designed for the XB4 and compatible XT4 platforms. XRAY manufactures this axle from its renowned HUDY Spring Steel™, providing the strength, durability, and precision required for competitive 1/10 scale racing. Designed for use on either the front left or front right, this axle is a direct replacement for the factory component. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Manufactured from HUDY Spring Steel™⚙️ Precision-machined front wheel drive axle🎯 Designed for accurate drivetrain fit and operation🔧 Fits either front left or front right position🚀 Built for competition-level durability🛠️ Excellent replacement or race-day spare 📦 Includes: (1) XRAY Front Drive Axle 📏 Specifications: Part Number: 365240Material: HUDY Spring Steel™Position: Front Left or RightType: Front Drive Axle 🔧 Compatibility: Verified fitment includes: ✅ XRAY XB4 Original✅ XRAY XB4 2016✅ XRAY XB4 2017✅ XRAY XB4 2018✅ XRAY XB4 2019✅ XRAY XB4 2020✅ XRAY XB4 2021 Carpet✅ XRAY XB4 2021 Dirt✅ XRAY XT4 XRAY's newer documentation also continues to show 365240 in the XB4 front drivetrain, including the XB4 2024 manual and newer XB4 parts listings. 💡 Pro Tip: Front drive axles take significant load from acceleration, steering, and impacts. If you're replacing a damaged axle, check the drive shaft coupling, cross pin, wheel bearings, and wheel hub at the same time for wear or play.

Read more less

🏁 Lightweight Graphite Composite. LCG Differential Performance. Upgrade or replace the gear differential pulley/case on your XRAY with the 324954-G Graphite Composite Gear Differential Case with 53T Pulley. XRAY identifies this as the graphite optional version of the standard 324954 LCG differential component. Designed for XRAY's LCG gear differential, the graphite composite construction provides an optional alternative to the standard hard-composite version while retaining the factory 53-tooth configuration. ⚡ Features: 🏁 Genuine XRAY option part⚙️ Integrated 53-tooth gear differential pulley🪶 Graphite composite construction🔧 Designed for XRAY's LCG gear differential system🎯 Precision factory fitment🚀 Optional graphite version of standard part #324954🛠️ Excellent replacement or tuning component for your race-day parts box 📦 Includes: (1) XRAY LCG Graphite Composite Gear Differential Case with 53T Pulley 📏 Specifications: Part Number: 324954-GMaterial: Graphite CompositeTooth Count: 53TType: LCG Gear Differential Case / PulleyPosition: Rear Drivetrain 🔧 Verified Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet XRAY's own documentation also shows 324954-G as the optional graphite gear-differential pulley in later XB2 and XT2 LCG differential assemblies. 💡 Pro Tip: The important distinction here is the “-G” suffix. 324954 is the standard hard-composite 53T LCG component, while 324954-G is the optional graphite-composite version.

Read more less

 🏁 Lightweight. Precise. Genuine XRAY Replacement. Keep your XRAY steering system smooth and precise with the XRAY Composite Steering Plate. Designed specifically for XRAY's 1-piece chassis platforms, this factory steering plate provides the proper geometry and fit needed for consistent steering performance. XRAY lists 322574 as the hard composite steering plate included with the vehicle, with the aluminum 322575 available as the optional upgrade. ⚡ Features: 🏁 Genuine XRAY replacement component⚙️ Hard composite construction🪶 Lightweight design for minimal steering-system weight🎯 Maintains precise steering geometry🔧 Designed specifically for XRAY 1-piece chassis configurations🚀 Smooth, consistent steering operation🛠️ Direct replacement for the factory steering plate🏎️ Ideal for maintenance, rebuilds, or your race-day spare parts box 📦 Includes: (1) XRAY Composite Steering Plate 📏 Specifications: Part Number: 322574Material: Hard CompositeType: Steering PlateApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Compatible with XRAY XB2 and XT2 models equipped with the applicable 1-piece chassis, including XB2 and XT2 platforms where 322574 is specified in the factory assembly. 💡 Pro Tip: If you're looking for additional steering-system strength and a more precise steering feel, XRAY offers the 322575 aluminum steering plate as the optional upgrade. XRAY notes that the aluminum version also provides increased clearance around the steering system for easier maintenance and setup adjustments.

Read more less

🏁 Genuine XRAY Replacement. Lightweight Composite. Precision Drivetrain Fit. Keep your XRAY drivetrain running smoothly with the XRAY XB2 LCG 38-Tooth Composite Gear. Designed for the LCG gear differential system, this genuine XRAY replacement component provides the precise fit and drivetrain performance expected from XRAY competition platforms. The lightweight composite construction helps keep rotating mass low while providing the durability needed for competitive 1/10 scale racing. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ 38-tooth composite gear🪶 Lightweight composite construction🎯 Precision molded for accurate fit and smooth operation🔧 Designed for the XRAY LCG gear differential system🚀 Helps maintain efficient and consistent drivetrain performance🛠️ Ideal replacement for worn or damaged differential components🏎️ Designed for competition-level 1/10 scale racing 📦 Includes: (1) XRAY LCG Composite Gear (38T) 📏 Specifications: Part Number: 324238Tooth Count: 38TMaterial: CompositeType: LCG Gear Differential Component 🔧 Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet 💡 Pro Tip: Differential and drivetrain gears experience constant load during acceleration and braking. If you're replacing a worn 38T gear, inspect the mating gears and differential components at the same time for damaged or rounded teeth. Keeping the complete gear set in good condition helps maintain a smooth, efficient drivetrain and consistent power delivery.

Read more less

 🏁 Factory Fit. Hard Composite. Precise Front-End Performance Keep your XRAY buggy performing with the precision and consistency it was designed for with the XRAY Hard Composite Front Roll Center Holder. This genuine XRAY replacement component is manufactured from hard composite material and designed to provide the correct mounting and geometry for the front roll center assembly. It's an ideal replacement for a worn or damaged component or a useful spare to keep in your race-day parts box. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Hard composite construction🎯 Designed to maintain precise front suspension geometry⚙️ Supports the front roll center assembly🔧 Direct replacement for the original component🚀 Designed for consistent, competition-level performance🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Hard Composite Front Roll Center Holder 📏 Specifications: Part Number: 322040-HMaterial: Hard CompositePosition: FrontType: Roll Center Holder 🔧 Compatibility: ✅ XRAY XB2 Original✅ XRAY XB2 Dirt✅ XRAY XB2 2017 Carpet✅ XRAY XB2 2017 Dirt✅ XRAY XB2 2018 Carpet✅ XRAY XB2 2019 Carpet✅ XRAY XB2 2019 Dirt✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 Original✅ XRAY XT2 2021 Carpet✅ XRAY XT2 2021 Dirt 💡 Pro Tip: The front roll center is an important part of suspension geometry and can affect steering response and overall chassis behavior. When replacing the holder, inspect the surrounding suspension hardware for wear or excessive play to help keep your XRAY's front end precise and consistent.

Read more less

🔧🏁 Replacement Composite Chassis Side Guards for XRAY XB2 & XT2 The XRAY Composite Bent Side Chassis Side Guards are genuine replacement components originally designed for the XB2C 2020 Carpet Edition and XB2D 2020 Dirt Edition buggy kits. These molded composite guards provide factory-fit protection along the sides of the chassis while maintaining the proper profile and fit of the vehicle. Also compatible with select XRAY XT2 platforms, this two-piece set is ideal for replacing worn or damaged side guards during a rebuild or routine maintenance. 🏁 About the Chassis Side Guards ⚙️ Bent Side Design The molded bent-side profile is designed to follow the chassis layout of compatible XRAY platforms, providing proper coverage while maintaining clearance for the vehicle's internal components. 🔧 Factory Replacement Fit Designed as genuine XRAY replacement parts, these guards install in place of the original components for a clean, precise fit. 🔧 Features Genuine XRAY replacement chassis components Composite construction Bent-side design Helps protect the sides of the chassis Precision molded for factory fitment Two-piece set Direct replacement for compatible XRAY platforms Ideal for maintenance, rebuilds, or race-day spares 📦 Includes (2) XRAY Composite Bent Side Chassis Side Guards 📊 Product Details Specification Details Brand XRAY Part Number 321250 Product Type Chassis Side Guards Material Composite Design Bent Side Quantity 2 🚙 Compatibility XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

🔧🏁 Hard Composite Replacement C-Hubs for XRAY XB2 & XT2 The XRAY Composite C-Hub is a genuine replacement suspension component for compatible XRAY XB2 and XT2 1/10 competition platforms. Constructed from XRAY's durable Hard composite material, these C-hubs provide precise factory fitment and a rigid, responsive front suspension setup. Choose the Right or Left side needed for your vehicle. ⚙️ Choose Your Side Right C-Hub – 322210-H Left C-Hub – 322220-H 🔧 Features Genuine XRAY replacement C-hub Available in Right or Left Hard composite construction Durable and rigid design Precision molded for proper fitment Maintains factory front suspension geometry Direct replacement for compatible XRAY platforms Ideal for repairs or race-day spares 📦 Includes (1) XRAY Hard Composite C-Hub in selected Right or Left configuration 📊 Product Details Specification Details Brand XRAY Product Type C-Hub Material Composite Compound Hard Right Part Number 322210-H Left Part Number 322220-H Position Front – Right or Left 🚙 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 Original XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

🔧🏁 Lightweight Titanium Upgrade for XRAY Shock Mounting The XRAY Titanium Shock Standoff Set is a precision-machined upgrade designed for a wide range of XRAY racing platforms. Constructed from high-grade titanium, these standoffs provide an excellent combination of strength, low weight, and durability for secure, reliable shock mounting. Ideal for racers looking to upgrade factory components with lightweight premium hardware, each standoff is CNC machined for precise fitment and dependable performance. 🏁 About the Titanium Shock Standoffs ⚙️ High-Grade Titanium Construction Titanium provides excellent strength while keeping weight to a minimum, making these standoffs well suited for competitive racing applications where both durability and weight matter. 🎯 Precision CNC Machined Each standoff is CNC machined for accurate fitment, helping provide a secure mounting point for the shocks and consistent suspension assembly. 💪 Durable & Corrosion Resistant In addition to being lightweight and strong, titanium offers excellent corrosion resistance for long-lasting performance through regular racing and maintenance. 🔧 Features Genuine XRAY optional upgrade High-grade titanium construction CNC machined for precision Lightweight design Strong and durable shock mounting Corrosion resistant Precision fit for compatible XRAY platforms Premium upgrade for competitive racing Package includes two standoffs 📦 Includes (2) XRAY Titanium Shock Standoffs 📊 Product Details Specification Details Brand XRAY Part Number 368045-T Product Type Shock Standoff Material Titanium Construction CNC Machined Quantity 2 🚙 Compatibility XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt XRAY XB4 2025 Carpet XRAY XB4 2025 Dirt XRAY XT2 2023 Carpet XRAY XT2 2023 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt XRAY XT4    

Read more less

🔧🏁 30g Stainless Steel Tuning Weight for XB2 & XT2 Chassis The XRAY Stainless Steel Electronics Plate is an optional tuning component designed for compatible 2024 XRAY XB2 and XT2 one-piece chassis. Constructed from stainless steel and weighing 30 grams, the plate provides an easy way to add weight beneath the electronics while keeping the installation clean and centralized. It's a simple chassis tuning option for racers looking to adjust overall weight distribution and balance without adding separate stick-on weights around the car. 🏁 About the Stainless Steel Electronics Plate ⚖️ 30g of Added Weight The stainless steel construction adds 30 grams to the chassis, providing racers with another option for fine-tuning vehicle weight and balance. 🔧 Electronics Plate Design Designed specifically as an electronics/ESC plate, the weight is positioned neatly within the electronics area rather than requiring individual weights to be placed around the chassis. ⚙️ XRAY Tuning Option Manufactured specifically for the compatible XRAY one-piece chassis, the plate provides proper fitment and a clean, purpose-built installation. 🔧 Features Optional XRAY chassis tuning part Stainless steel construction 30g weight Designed for the 2024 XB2 and XT2 one-piece chassis Functions as an electronics/ESC mounting plate Adds centralized chassis weight Helps fine-tune vehicle weight distribution Clean alternative to separate add-on weights Precision fit for compatible XRAY platforms 📦 Includes (1) XRAY Stainless Steel Electronics Plate – 30g 📊 Product Details Specification Details Brand XRAY Part Number 326152 Product Type Electronics / ESC Plate Material Stainless Steel Weight 30g Application Chassis Tuning 🚙 Compatibility XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt      

Read more less

🔧🏁 Pre-Oiled Replacement X-Rings for Smooth, Consistent Shock Performance The XRAY 3x2mm Silicone Pre-Oiled Shock X-Rings are genuine replacement shock seals designed for compatible XRAY racing platforms. These silicone X-rings come pre-oiled and ready for installation, making them a convenient choice for shock rebuilds, routine maintenance, or keeping spares in your pit box. The X-ring profile provides consistent sealing around the shock shaft while allowing smooth suspension movement for dependable on-track performance. 🔧 About the XRAY Shock X-Rings 💧 Pre-Oiled & Ready to Use Each X-ring comes pre-oiled, eliminating an extra preparation step during shock assembly or rebuilding. ⚙️ 3x2mm Silicone Construction The 3x2mm silicone X-rings are designed to provide a reliable seal while maintaining smooth shock shaft movement and consistent suspension operation. 🏁 Genuine XRAY Replacement Parts Manufactured for XRAY applications, these seals provide the proper dimensions and fit for compatible XRAY shock assemblies. 🔧 Features Genuine XRAY replacement shock X-rings 3x2mm size Silicone construction Pre-oiled for convenient installation X-ring profile for effective shock shaft sealing Promotes smooth shock shaft movement Ideal for shock rebuilds and maintenance Great spare for the race or pit box Package of 10 📦 Includes (10) XRAY 3x2mm Silicone Pre-Oiled Shock X-Rings 📊 Specifications Specification Details Brand XRAY Part Number 973030 Product Type Shock X-Rings Size 3x2mm Material Silicone Pre-Oiled Yes Quantity 10 🚙 Compatibility XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XT4 Check your specific XRAY model and shock configuration for proper fitment before installation.  

Read more less

🔧🏁 Replacement LCG Front Motor Gearbox for XRAY XB2 The XRAY LCG Composite Front Motor Gear Box Set is a genuine replacement component designed for compatible XRAY XB2 2020 Carpet and Dirt edition 1/10 scale 2WD buggies. Featuring XRAY's LCG (Low Center of Gravity) configuration, this composite gearbox is ideal for replacing a worn or damaged original while maintaining factory fitment and drivetrain geometry. ⚙️ About the LCG Front Motor Gear Box 🏁 Factory Replacement Designed as a direct replacement for the original gearbox assembly, the 323019 allows you to restore your compatible XRAY chassis using genuine factory components. 📉 LCG Design The Low Center of Gravity configuration positions the drivetrain components according to XRAY's intended chassis layout, maintaining the handling and weight distribution characteristics of the compatible platform. 🔧 Composite Construction Durable composite construction provides the lightweight, precise fit required for competitive racing applications. 🔧 Features Genuine XRAY replacement part LCG front motor gearbox design Durable composite construction Lightweight race-focused design Maintains factory drivetrain geometry Direct replacement for compatible models Ideal for replacing worn or damaged gearbox components Designed for competitive 1/10 scale racing 📦 Includes (1) XRAY LCG Composite Front Motor Gear Box Set 📊 Product Details Specification Details Brand XRAY Part Number 323019 Product Type Front Motor Gear Box Set Configuration LCG Material Composite Application 1/10 2WD Racing 🚙 Compatibility XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet

Read more less

🔋🏁 Ultra-Low CG Power Built for Competitive Racing The R1WURKS 4600mAh 120C 7.6V 2S ULCG Shorty LiPo Battery is a race-focused pack designed to deliver an excellent combination of punch, runtime, low weight, and an ultra-low center of gravity. Using R1WURKS Silicon Graphene cell technology, this shorty pack offers reduced internal resistance, cooler operating temperatures, and strong voltage throughout the run. At just 18.4mm tall and 157g, the ultra-low-profile design helps racers lower chassis weight and center of gravity while maintaining the power needed for both stock and modified racing. 🏁 About the R1WURKS ULCG Shorty ⚡ Silicon Graphene Cell Technology R1WURKS Silicon Graphene cells are designed to provide lower internal resistance and improved efficiency, helping the battery operate cooler while delivering excellent voltage, punch, and runtime. The technology also provides increased cycle life and improved voltage characteristics for demanding race applications. 📉 Ultra-Low Center of Gravity With a height of only 18.4mm, the ULCG design places battery mass lower in the chassis. This can help reduce the vehicle's overall center of gravity and gives racers additional flexibility when tuning chassis weight and balance. 🚀 120C Performance The 4600mAh pack carries a 120C peak rating, providing the strong power delivery and acceleration required for competitive stock and modified classes. 🔌 5mm Bullet Connections The battery uses 5mm bullet connectors for the main power connection along with a 2mm balance plug. 🔧 Features 4600mAh capacity 7.6V 2S LiPo configuration Silicon Graphene cell technology Ultra-low center of gravity design 120C peak discharge rating Excellent punch and sustained voltage Strong runtime for competitive racing Reduced internal resistance Lower operating temperatures Increased cycle life Lightweight 157g design Only 18.4mm tall 5mm bullet connectors 2mm balance connection Suitable for stock and modified racing Supports charge rates up to 3C 1C charging recommended for maximum battery life ROAR Approved 📦 Includes (1) R1WURKS 4600mAh 120C 7.6V 2S ULCG Shorty Silicon Graphene LiPo Battery 📊 Specifications Specification Details Brand R1WURKS SKU 030040 Battery Type Silicon Graphene LiPo Configuration 2S Nominal Voltage 7.6V Capacity 4600mAh Peak Discharge 120C Watt Hours 35Wh Max Charge Rate 3C Recommended Charge Rate 1C Main Connector 5mm Bullet Balance Connector 2mm Length 92.8mm Width 47mm Height 18.4mm Weight 157g ROAR Approved Yes  

Read more less

⚡🏁 High-Output 12V Power for Your RC Pit Setup The R1WURKS 12V Power Supply delivers a powerful, dependable source of DC power for your RC charging station and pit area. With an output of 12 volts, 750 watts, and 75 amps, it's built to provide plenty of power for demanding charging setups. Finished with a carbon-print vinyl wrap, the R1WURKS power supply combines serious output with a clean, race-ready appearance. ⚡ About the R1WURKS Power Supply 🔋 750W / 75A Output With up to 750 watts and 75 amps of 12V DC output, this power supply provides the capacity needed to run compatible RC battery chargers and other 12V pit equipment. 🔌 Multiple Configurations Available R1WURKS offers several power supply configurations to suit different charging setups, including standard and low-profile options with multiple output slots. 🏁 Pit-Ready Finish A carbon-print vinyl wrap gives the power supply a finished appearance that looks right at home on a race bench or charging station. 🔧 Features 12V DC power supply Up to 750W output Up to 75A output Designed for RC charging and pit applications Carbon-print vinyl wrapped exterior Multiple configurations available Compact solution for powering compatible DC chargers 🔌 Available Configurations 2-Slot 2-Slot Low Profile – 67A w/USB 3-Slot w/USB 📊 Specifications Specification Details Brand R1WURKS Item Number 080001 Product Type DC Power Supply Output Voltage 12V Maximum Output 750W Maximum Current 75A Finish Carbon-Print Vinyl Wrap Application RC Chargers / Pit Equipment Note: Output specifications may vary by configuration. The 2-slot low-profile version is rated at 67A, while the supplied general specifications list the standard power supply at 75A.

Read more less

🔧⚙️ Precision Suspension Tuning Starts Here The ProTek RC Aluminum Ball Stud Washer Set is a must-have upgrade for racers looking to fine-tune their suspension geometry. Made from durable black anodized aluminum, these precision-machined washers won't compress or deform like plastic spacers, providing consistent ball stud height for accurate suspension setup. With three different thicknesses included, you'll have the flexibility to make precise roll center, steering, and wheelbase adjustments. 🔧 About the Aluminum Ball Stud Washer Set ⚙️ Precision Suspension Adjustments These washers allow you to accurately adjust ball stud height, making it easier to fine-tune suspension geometry for improved handling and performance. Common uses include: Roll center adjustments Steering geometry tuning Wheelbase adjustments Link height spacing 💪 Durable Aluminum Construction Unlike plastic spacers, these black anodized aluminum washers resist flattening and deformation, helping maintain consistent suspension settings even under heavy loads. 🏁 Multiple Thicknesses Included Three washer thicknesses provide a variety of tuning options, allowing quick setup changes for different track conditions. 🔧 Features ✔ Precision-machined aluminum construction✔ Black anodized finish✔ Won't flatten or deform like plastic spacers✔ Fits both 4-40 and M3 ball studs✔ Ideal for suspension geometry adjustments✔ Three washer thicknesses included✔ Great for racers and performance tuning 📦 Includes (4) 3 x 5.5 x 0.5mm Aluminum Washers (4) 3 x 5.5 x 1.0mm Aluminum Washers (4) 3 x 5.5 x 2.0mm Aluminum Washers Total: 12 Washers 📊 Specifications Specification Details Material Aluminum Finish Black Anodized Inside Diameter 3mm Outside Diameter 5.5mm Thicknesses Included 0.5mm, 1.0mm, 2.0mm Quantity 12 Washers 🚗 Compatibility Compatible with: RC vehicles using 4-40 ball studs RC vehicles using M3 ball studs Ideal for most on-road and off-road vehicles that utilize adjustable ball stud suspension geometry. ⚠️ Notes Precision tuning washers designed for suspension geometry adjustments. Compatible with both 4-40 and M3 ball studs. Black anodized finish provides excellent durability and corrosion resistance. • • Also available in Blue Anodized (ProTek RC PTK-8371).

Read more less

Hinge Pin Brace Overview:This is a replacement front hinge pin brace designed for Team Associated RC10 platforms. It helps secure the hinge pins and maintain proper suspension alignment. 🔧 Key Features ✔ Replacement front hinge pin brace✔ Helps maintain suspension alignment✔ Supports chassis rigidity✔ Direct fit design 📦 Includes (1) Front Hinge Pin Brace 🚗 Compatibility Team Associated RC10 B7.1 Team Associated RC10 B7.1D Team Associated RC10 SC7 Team Associated RC10 T7 Ideal for replacing worn or damaged components, this brace helps keep your suspension secure and performing consistently.  

Read more less

The R1WURKS Ultra-Lightweight Titanium HD CVA Bones (X67mm) are engineered for racers chasing maximum efficiency and response in stock classes. Crafted from specially treated Ti 6Al-4V Grade 5 Titanium, these are the lightest CVA bones R1WURKS has produced, dramatically reducing rotational inertia for faster acceleration and sharper braking. Optimized for 21.5–17.5 stock racing, these bones deliver improved power transfer, better cornering agility, and a noticeable reduction in overall drivetrain mass—giving stock racers a real competitive edge. Key Benefits Faster acceleration and deceleration Improved braking response Increased power transfer efficiency Better agility and responsiveness in corners Reduced rotational inertia and overall vehicle weight Features & Specifications Ultra-lightweight: 5.96g per pair Approximately 40% lighter than standard steel bones Precision Swiss-style machining with ultra-tight tolerances Made from treated Ti 6Al-4V Grade 5 Titanium Laser-etched logos and identification markings Designed specifically for stock racing performance Includes (2) Titanium HD CVA Bones Replaces TLR232138 Fitment TLR 22X TLR 22 5.0 A no-compromise drivetrain upgrade built for stock racers who want quicker response, lighter rotating mass, and sharper on-track performance. 🏁

Read more less

Rolling freely is critical for race-day performance, and the JConcepts Radial NMB Bearing Set is built to meet the demands of elite competition. This complete kit uses NMB stainless steel bearings manufactured to exacting tolerances, delivering smooth rotation, durability, and long service life under hard racing conditions. Designed as a direct-fit replacement, this set restores efficiency, reduces drivetrain drag, and helps keep lap times consistent from the first heat to the mains. Features & Benefits: High-quality NMB stainless steel bearings Precision tolerances for smooth, efficient rotation Durable construction for long-lasting performance Reduces friction and improves drivetrain efficiency Designed for the rigors of competitive racing Compatibility (Direct Fit): Team Associated B6.4 Team Associated B6.4D Team Associated T6.4 Team Associated SC6.4 Includes: Complete radial bearing set for supported models A must-have upgrade or refresh for racers looking to keep their Associated platform rolling smooth and fast.

Read more less