Boof RC 5mm Heatsink Bullet Connectors (2)🔥 Cool Under Pressure. Built to Perform. The Boof RC 5mm Heatsink Bullets are designed to handle serious amps while keeping temps in check. With integrated heatsink fins machined into each bullet, these connectors improve heat dissipation, allowing for longer, more efficient runs. Whether you’re building a competition-grade power system or upgrading your basher, these bullets deliver both function and form. ✅ 5mm bullet connectors with integrated heatsink fins✅ Improved thermal performance under high loads✅ Precision-machined for secure fitment✅ Ideal for motors, batteries, and ESC connections✅ Sleek anodized finish 📦 Includes:(2) Boof RC 5mm Heatsink Bullets 💡 Boof Tip: Use with high-performance ESCs or motors where heat can rob you of power—these bullets fight back.

Read more less

Product Overview Designed to be color coordinated (e.g. Red uses all red wires and sheath) for charging 2S battery packs through 12ga wire. Includes gold-plated 4mm to 5mm bullets on the battery end to cover all battery types and a 4mm bullet on the charging end. Comes with the popular XH 3pin balance plug, which most trim one of the plastic alignment rails with an x-acto to plug right into the charger instead of the balance port. Or you can use the included XH 7pin if you don't want to brave that. Balance leads are 2.5" (63.5mm) longer than the charge leads so they can easily be plugged into any charger design. Specifications Color Coordinated (all wires and sheath colors match). 12ga soft silicone wire at 2 feet long (610mm). Gold-plated bullets, 4mm to 5mm on battery end and 4mm on charger end. Balance leads are 2.5" (63.5mm) longer than charging leads. Comes with XH 3pin balance plug installed and includes XH 7pin. Tips You can skip using a balance board or changing out to the 7 pin adapter with this simple modification.   

Read more less

 8-in-1 Battery Multi Charger Cable

Read more less

Product Overview Designed to be color coordinated (e.g. Red uses all red wires and sheath) for charging 2S battery packs through 12ga wire. Includes an XT60 plug on the charger end and gold-plated 4mm to 5mm bullets on the battery end to cover all battery types. Comes with the popular XH 3pin balance plug, which most trim one of the plastic alignment rails with an x-acto to plug right into the charger instead of the balance port. Or you can use the included XH 7pin if you don't want to brave that. Balance leads are 2.5" (63.5mm) longer than the charge leads so they can easily be plugged into any charger design. Specifications Color Coordinated (all wires and sheath colors match). 12ga soft silicone wire at 2 feet long (610mm). XT60 plug on charger end. Gold-plated 4mm to 5mm bullets on battery end. Balance leads are 2.5" (63.5mm) longer than charging leads. Comes with XH 3pin balance plug installed and includes XH 7pin. Tips You can skip using a balance board or changing out to the 7 pin adapter with this simple modification.   

Read more less

Overview:Protect your electronics and add style to your setup with the 1UP Racing LowPro Bullet Plug Grips w/5mm Bullets. These grips slide directly onto 1UP 4mm and 5mm LowPro Bullet Plugs to clearly identify positive (+) and negative (–) wires, helping prevent costly mistakes while offering a professional finish. CNC machined from high-quality aluminum, they feature bold red and black anodizing, laser-etched polarity markings, and a silver outer ring for excellent grip and premium looks. The included 1UP 5mm LowPro Bullet Plugs have a low-profile 2mm tall head with 6-point contact for reduced resistance and a total length of 15mm—perfect for today’s LCG LiPo packs. Features: Instantly identifies positive (+) and negative (–) wires Prevents pulling on wires when unplugging your battery Hides messy solder joints for a cleaner look Precision CNC aluminum grips with black/red anodizing & laser etching Silver outer ring for excellent grip Includes: 1 Pair of LowPro Bullet Plug Grips (Black/Red) 1 Pair of 5mm LowPro Bullet Plugs Compatible with 1UP 4mm & 5mm LowPro Bullet Plugs (sold separately) Recommended: Secure with a drop of CA glue after installation Compatibility: Works with all 1UP Racing 4mm & 5mm LowPro Bullet Plugs Ideal for use with modern LCG LiPo batteries

Read more less

  Boof RC EC3 Female to EC5 Male Adapter – 12AWG, 5cm Need to bridge the gap between EC3 and EC5? This compact Boof RC adapter makes it easy. Featuring a short 5cm length and flexible 12AWG wire, it's perfect for clean, efficient connections when adapting between connector types. ✅ EC3 (female) to EC5 (male)✅ Flexible 12AWG silicone wire✅ Short 5cm design keeps your setup tidy✅ Great for adapting chargers or power leads✅ No soldering required—plug and play 📏 Wire Gauge: 12AWG📐 Length: 5cm🔌 Connector Type: EC3 (Female) to EC5 (Male) 💡 Boof Tip: Keep one in your pit box—perfect when you’re in a bind and need an EC5 connection fast.

Read more less

  Boof RC Adapter – TRX-Style Female to EC5 Male (12AWG, 5cm) Quickly convert TRX-style connectors to EC5 with this compact Boof RC adapter. Built with 12AWG high-flex silicone wire and a short 5cm length, it’s perfect for tight setups or on-the-go charging needs. ✅ TRX-style (female) to EC5 (male)✅ Short 5cm length for clean installs✅ High-quality 12AWG silicone wire✅ Ideal for battery conversions and charger compatibility✅ Plug and play—no soldering required 📏 Wire Gauge: 12AWG📐 Length: 5cm🔌 Connector Type: TRX-Style Female to EC5 Male 💡 Boof Tip: Keep one handy in your gear bag—perfect for charging your packs with EC5 ends when running TRX-style batteries.  

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

  Easily connect batteries and electronics with different plug types using the Gens Ace XT60 Male to Deans (T) Female Adapter Cable. Perfect for racers and bashers who want quick compatibility without rewiring. Features: XT60 Male to Deans (T) Female adapter for versatile connectivity High-quality construction for safe, efficient power transfer Compact design for easy use in tight spaces No soldering required — plug-and-play convenience A handy tool for your RC pit box to keep you running, no matter what connectors you’re working with.

Read more less

  Boof RC 4.0mm Banana Male to EC3 Male Cable – 14AWG, 30cm Charge with confidence using the Boof RC 4.0mm Banana to EC3 cable. Designed for reliability and ease of use, this 30cm lead features 14AWG silicone wire, making it a great choice for efficient charging or power transfer. Ideal for connecting your charger to EC3-equipped batteries or devices. ✅ 4.0mm banana plugs (male) to EC3 (male)✅ Flexible 14AWG silicone wire✅ 30cm length for versatile use✅ Perfect for chargers, power supplies, and adapter setups✅ Clean and secure connections 📏 Wire Gauge: 14AWG📐 Length: 30cm🔌 Connector Type: 4.0mm Banana (Male) to EC3 (Male) 💡 Boof Tip: Keep one in your pit bag—this lead is a must-have for EC3 users running custom or multi-port charging setups.

Read more less

Boof RC EC2 Female to 4.0mm Banana Plug Cable (18AWG, 30cm) Keep your smaller RC packs connected and charging with this EC2 to 4.0mm banana plug lead from Boof RC. Designed with 18-gauge wire and a 30cm length, it’s the perfect fit for compact battery connections without sacrificing performance. ✅ EC2 Female to 4.0mm Banana Plugs✅ 18AWG wire for efficient current delivery✅ 30cm length for flexibility and reach✅ Great for 1/18 and 1/16 scale battery charging 🔌 Connector A: EC2 (Female)🔌 Connector B: 4.0mm Banana Plugs📏 Wire: 18AWG, 30cm (approx. 12 inches) 💡 Boof Tip: A go-to charging lead for smaller LiPos—simple, compact, and reliable.

Read more less

Spektrum RC XBC100 Smart Battery Cell Checker & Servo Driver – SPMXBC100The Ultimate Smart Pit Tool The Spektrum XBC100 is more than just a battery checker—it's your all-in-one smart tool for RC diagnostics, model setup, and mobile charging. Designed for drivers and pilots alike, this compact device brings together battery analysis, balancing, servo testing, and even mobile USB charging into a single, powerful unit. Whether you're balancing LiPos, fine-tuning servos, or checking data from your Smart battery, the XBC100 delivers it all on a bright, full-color display with intuitive touch controls. The built-in Qualcomm 3.0 USB charger port adds convenience by powering your smartphone or Spektrum Smart transmitter when you're on the go. ✅ Built-in cell balancer for LiPo battery maintenance✅ Smart Battery compatibility for in-depth data readout✅ Integrated advanced servo tester with PWM output✅ Full-color IPS display – visible even in sunlight✅ Quick Charge USB port for Android/iOS devices✅ Touchscreen interface for quick adjustments✅ Update-ready for future features via USB 📦 Specifications: Part Number: SPMXBC100 Display: Full-color IPS LCD Functions: Battery checker, balancer, servo tester, Smart battery interface USB Output: Qualcomm 3.0 Quick Charge (up to 12V/2A) Smart Features: View cycle count, temp, status, and configure Smart LiPo settings Update Port: Yes Compatibility: Spektrum Smart Batteries, standard LiPo packs, RC servos The XBC100 belongs in every pit bag. Whether you’re at the track or in the field, it’s your portable tech assistant for tuning, troubleshooting, and charging with total control.  

Read more less

Easily connect your SCX24 or other PH2.0-powered devices to IC3-equipped setups with the Spektrum IC3 Device to JST PH2.0 Device Adapter. This high-quality adapter ensures secure, reliable power transfer between different connector types. Features: Female IC3 to Female JST PH2.0 configuration Perfect for powering Axial SCX24 models from IC3-equipped sources Durable construction for long-lasting use Compact, lightweight design for easy portability Compatibility: Axial SCX24 Includes: (1) IC3 Device to JST PH2.0 Device Adapter A handy accessory to keep in your pit box for quick, connector-specific setups.

Read more less

1up Racing LowPro Bullet Plugs + Grips – The Perfect Pairing for Clean Power Delivery 🔥 Take your wiring to the next level with the 1up Racing LowPro Bullet Plugs and Grips — the ultimate combo for pro-level installs and unmatched reliability. Designed for all LiPo batteries with 5mm inputs, this duo ensures a secure connection, minimal resistance, and a factory-finished look. ⚡ The LowPro Plugs feature a deep solder recess for clean joints with 11–16 gauge wire, while the Grips slide snugly into place, providing clear terminal ID and a stylish silver outer ring for superior grip and aesthetics. ✨ Key Features: 🔩 LowPro 5mm Bullet Plugs – Oversized 6-point contact for secure, low-resistance connection🧲 Deep Solder Recess – Quick, easy soldering with any 11–16 AWG wire🎨 Grips with Color ID – Instantly identify positive/negative terminals💪 Textured Outer Ring – Superior grip and eye-catching finish⚙️ Universal Fit – Works with all LiPo batteries using 5mm bullet inputs 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs✔️ (2) Color-Grip Caps (Red + Black) 📌 Tip: Use a couple drops of CA glue to secure the grips after install! 💡 Wired to Win – Upgrade to 1up LowPro Bullet Plugs + Grips Today!  

Read more less

  Boof RC T Plug Male to TRX-Style Female Adapter Connect with Confidence. Power What Matters. This Boof RC adapter allows you to convert a standard T Plug (Deans-style) connection to a TRX-style plug, making it perfect for adapting batteries to Traxxas®-type vehicles—without the trademark headaches. ✅ T Plug (Male) to TRX-Style (Female)✅ Compact and convenient—no soldering required✅ 14AWG silicone wire for solid current flow✅ Compatible with many Traxxas-style ESCs and vehicles✅ Approx. 5cm wire for flexible routing 📦 Includes:(1) Boof RC T Plug Male to TRX-Style Female Adapter 🧠 Pro Tip: Great to have in your pit box for quick swaps when running mixed battery styles.

Read more less

Team Exalt 75A 750W 12V Power Supply w/ USB & Protector WrapPart #: EXAPS75 Power up your pit with the Team Exalt 75A Power Supply, a high-performance 750-watt unit designed to meet the demands of today’s most powerful chargers. Built with precision and style, this power supply features triple gold bullet outputs, USB charging, and comes wrapped in a rugged, X-rated protective wrap that looks as sharp as it performs. Key Features: Delivers 75 amps of continuous 12V output (750 watts total) (3) Sets of 4mm female gold bullet output ports Integrated 5V / 3A USB port for phones, radios, and other accessories Custom Exalt X-rated protective wrap and logo-engraved 3D printed cover Heavy-duty power cord included Smart Cooling Fan with auto-adjust speed control Full suite of protection: Low-voltage Over-current Over-voltage Short circuit Over-temperature Specifications: Input Voltage: 100–240V AC Output Voltage: 12V DC Output Current: 0–75A Dimensions: 8.5" x 3.4" x 1.5" (215 x 86 x 39mm) Weight: 2.2 lbs Includes: (1) Exalt 75A Power Supply (1) Heavy-duty power cord (1) Pre-installed 3D printed Exalt cover (1) X-rated battery wrap Compact, powerful, and race-ready — the EXAPS75 delivers the juice your setup needs.

Read more less

Connect your battery and device with ease using the Spektrum IC3 Battery to JST-PH Device Adapter. Designed for hassle-free compatibility, this adapter lets you use batteries with an IC3 female connection on devices that require a JST-PH male plug. Features: IC3 Female to JST-PH Male configuration Allows use of IC3-equipped batteries with JST-PH powered devices High-quality construction for reliable power transfer Compact design for easy handling and storage Includes: (1) IC3 Female to JST-PH Male Adapter A must-have accessory for expanding compatibility across your RC gear.  

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

  Traxxas Battery Plug Charge Indicator Set (Green x4, Blue x4, Grey x4) – Part #2943🔋 Stay Organized. Stay Safe. Take the guesswork out of battery management with the Traxxas Battery Charge Indicator Set. Designed to clearly mark the charge status of your LiPo batteries, these color-coded plugs help keep your storage and transport routine safe, clean, and efficient. ✅ Green = Fully Charged✅ Blue = Storage Charge✅ Grey = Discharged✅ Shields connectors from dirt and debris✅ Essential for safe battery handling 📦 Includes: (4) Green Charge Indicator Plugs (4) Blue Storage Indicator Plugs (4) Grey Discharge Indicator Plugs 💡 Pro Tip: Make charge-checking part of your pit routine to avoid costly mistakes and extend battery life.  

Read more less

Boof RC 14AWG Silicone Wire – Black (1 Meter / 3.3 Feet) 🛠️ Clean Looks. Pro-Level Performance. This Boof RC 14AWG Black Silicone Wire is the wiring solution that delivers clean aesthetics and performance in tight installs. Use it for signal wiring, battery leads, or custom harnesses where space and flexibility matter. ✅ Ideal 14AWG size for RC cars, boats & planes✅ Flexible, solder-friendly silicone jacket✅ High-strand copper core for consistent flow✅ Clean black finish for professional wiring✅ Heat-resistant and durable✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Black 14AWG Boof RC Silicone Wire    

Read more less

Boof RC 12AWG Silicone Wire – Black (1 Meter / 3.3 Feet) 🖤 Sleek Looks. Reliable Power. Boof RC’s 12AWG Black Silicone Wire offers premium flexibility and durability for clean and reliable wiring. Whether you’re upgrading electronics or building custom charge leads, this wire is a solid go-to choice for RC hobbyists. ✅ 12AWG gauge – reliable current handling✅ Ultra-flexible silicone insulation✅ Low-resistance stranded copper conductor✅ Clean black color for a pro finish✅ Heat-resistant and easy to solder✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Black 12AWG Boof RC Silicone Wire  

Read more less

Boof RC 12AWG Silicone Wire – Red (1 Meter / 3.3 Feet) 💥 Built for Power. Made for Clean Installs. Boof RC’s 12AWG Red Silicone Wire is ideal for mid-to-high amp RC applications. Flexible, heat-resistant, and easy to solder, this wire makes your wiring look pro while delivering the performance you need. The red color makes polarity easy to identify in your setup. ✅ 12AWG gauge – perfect for ESCs, batteries, and charge leads✅ Super-flexible silicone jacket✅ Vibrant red for clear polarity✅ Stranded copper core for low resistance✅ Heat-resistant & solder-friendly✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Red 12AWG Boof RC Silicone Wire

Read more less

Boof RC T-Plug Male to EC3 Female Adapter🔌 Quick Conversion. Clean Power. Need to connect a battery with a T-style plug to a device or charger that uses EC3? This compact Boof RC adapter gets the job done without soldering or hassle. Designed with precision and convenience in mind, it’s a must-have for every pit box. ✅ T-Plug (Deans-style) Male to EC3 Female✅ 14AWG silicone wire for dependable current delivery✅ 5cm short lead keeps setup tidy✅ Plug-and-play—no tools needed✅ Great for batteries, chargers, or ESC conversions 📦 Includes:(1) T-Plug Male to EC3 Female Adapter 💡 Boof Tip: Simplify your wiring setup without compromising performance.  

Read more less

Boof RC QS8 to 4mm Bullet Plug Adapter Bridge high-performance power systems with ease using the Boof RC QS8 to 4mm Bullet Plug Adapter. Designed for racers and bashers running high-amp setups, this adapter lets you connect QS8 batteries or ESCs to standard 4mm bullet-style components without the hassle of soldering. ✅ QS8 (Male/Female) to 4mm Bullet Plugs✅ Ideal for high-current applications✅ Compact and clean adapter solution✅ Heavy-duty connector pairing for secure connections✅ Plug and play—no tools, no stress 🔌 Connector Type: QS8 to 4mm Bullet📦 Includes: (1) QS8 to 4mm Adapter 💡 Boof Tip: Perfect for linking ultra high-amp QS8 batteries to 4mm-compatible chargers, motors, or ESCs. Don’t be caught without one on race day!

Read more less

Boof RC Adapter – TRX-Style Male to XT60 Female (14AWG, 5cm) Need to connect your TRX-style battery to an XT60 charger or ESC? This compact Boof RC adapter makes the conversion effortless. Built with 14AWG silicone wire and a short 5cm length for a clean, efficient setup. ✅ TRX-style (male) to XT60 (female)✅ Compact 5cm length—perfect for tight spaces✅ Durable 14AWG flexible silicone wire✅ Great for chargers, ESCs, and adapter setups✅ Plug and play—no tools needed 📏 Wire Gauge: 14AWG📐 Length: 5cm🔌 Connector Type: TRX-Style Male to XT60 Female 💡 Boof Tip: Keep one in your pit box to bridge your TRX packs with XT60-based gear—no rewiring required!

Read more less

Boof RC Adapter – EC3 Male to EC5 Female (10cm, 12AWG Wire) Need to bridge the gap between EC3 and EC5? This Boof RC adapter is built with 12AWG wire and a compact 10cm length—perfect for charging or connecting different gear with ease. ✅ EC3 Male to EC5 Female✅ 12-gauge wire for strong, reliable current flow✅ 10cm length keeps your wiring clean and manageable✅ Ideal for charging setups or plug conversions 🔌 Connector A: EC3 (Male)🔌 Connector B: EC5 (Female)📏 Wire: 12AWG, 10cm (approx. 4 inches) 💡 Boof Tip: This adapter keeps your pits tidy and your packs compatible—no more plug limitations.

Read more less

Boof RC Adapter – T-Style Plug (Female) to EC3 (Male) with Short Wire Need to connect EC3 batteries to a T-plug setup? This Boof RC adapter features a clean, flexible short-wire design that gets the job done—no soldering needed. ✅ T-Style Female (Deans-type) to EC3 Male✅ Short wire provides flexibility without the bulk✅ Gold-plated connectors for reliable performance✅ Great for charging or running mismatched plug types 🔌 Connector A: T-Style (Female)🔌 Connector B: EC3 (Male)📏 Wire Length: Short (approx. 2–3 inches) 💡 Boof Tip: A handy solution for adapting gear on the fly—keep one in your box and never miss a heat.

Read more less

Boof RC Charging Lead – XT60 Female to EC3 Male A compact powerhouse for your charging setup, the Boof RC XT60 to EC3 lead is built for racers who need reliable performance and clean connections. Whether you're charging 2S or 3S LiPos, this lead handles the job with ease. ✅ XT60 Female plugs directly into your charger✅ EC3 Male fits many mid-size LiPo batteries✅ Flexible 12 AWG silicone wire for high-current loads✅ Precision-soldered and heat-shrunk for durability✅ Ideal for compact packs used in 1/10 scale vehicles 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: EC3 Male 💡 Boof Tip: EC3 is the go-to connector for mid-range setups—this lead makes charging easy, safe, and fast.

Read more less

Boof RC Charging Lead – XT60 Female to EC5 Male Power up with confidence using the Boof RC XT60 to EC5 charging lead. Whether you’re trackside or charging in the workshop, this lead delivers efficient power transfer with a solid, secure fit. ✅ XT60 Female connects directly to your charger✅ EC5 Male fits popular high-amp LiPo battery connectors✅ Heavy-duty 12 AWG silicone wire handles serious current✅ Heat-shrunk ends for clean, secure terminals✅ Built tough for racing, bashing, or field charging 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: EC5 Male 💡 Boof Tip: Perfect for high-current 4S/6S packs and chargers that demand consistent performance. Built Boof Tough.    

Read more less

  Charge with confidence using the Boof RC XT60 to TRX-style charging lead — a reliable connection for your RC power needs. Whether you're juicing up packs on your bench or in the pits, this cable bridges modern XT60 chargers with the classic-style battery plug found on many RTR vehicles. ✅ XT60 female plugs directly into most smart chargers✅ Compatible with legacy "clip-style" battery connectors✅ 12 AWG silicone wire for safe, efficient current flow✅ Heat-shrunk terminals for clean, durable connections✅ Great for backyard bashers and race rigs alike 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: TRX-style Male 💡 Boof Tip: Always double-check polarity and connector fit before plugging in. This lead is built for performance — just like your rig.  

Read more less

Team Exalt Charger StandPart #: EXA6473 The Team Exalt Charger Stand is the perfect solution to keep your pit area clean, organized, and professional. Designed to fit most popular RC chargers, this sleek, 3D-printed stand lifts your charger off the table, providing better airflow and freeing up valuable workspace for batteries, tools, and accessories. Whether you're at the track or in the workshop, this stand ensures your charger stays securely in place while making cable management easier and more efficient. Features: Custom-designed for a stable, elevated platform Compatible with most common RC battery chargers Lightweight, durable 3D-printed construction Keeps cables and connectors organized Helps promote better charger ventilation and performance Sleek black finish with clean edges for a professional look Includes: (1) Team Exalt Charger Stand (charger not included) Get organized and race-ready with Team Exalt.  

Read more less

Team Exalt Shorty LiPo Battery Storage Case (LCG)PART #: EXA4053 Keep your race-day power organized, protected, and ready to roll with the Team Exalt Shorty LiPo Battery Storage Case. Designed to hold up to five LCG shorty LiPo batteries, this lightweight, 3D-printed case is the perfect addition to any pit setup. Built from high-quality PLA, this compact and durable box keeps your batteries secure during storage and transport—without taking up unnecessary space. Whether you're heading to a local club race or a national event, this case helps you stay race-ready and clutter-free. Features: Holds five LCG shorty LiPo batteries 3D printed from durable PLA material Compact and lightweight—ideal for transport Precision-sized battery slots keep packs secure Easy to fit into your tool bag or pit box Includes: (1) Shorty LiPo Battery Storage Case (holds 5 batteries) Specifications: Material: PLA Outer Dimensions: 6.5 x 5 x 2 in (165.1 x 127 x 50.8 mm) Slot Dimensions: 3.8 x 1 x 1.6 in (96.5 x 25.4 x 40.6 mm) Note: This case is for storage and transport only. Not designed for charging or fire-safe containment.

Read more less

🔌 Simple, Reliable Charging – The Avid RC Receiver Charge Lead makes charging your receiver packs easy with 4mm bullets to a female Futaba plug. Built with quality 20awg wire and wrapped in a sleek black nylon sleeve, it’s a durable and dependable pit essential. ⚙️ Specifications:✅ 4mm bullets to female Futaba plug✅ 20awg wire for efficient charging✅ 13.8in (350mm) length for flexibility and convenience✅ Black nylon sleeve for protection and clean look 📦 Includes: (1) Receiver Charge Lead – 4mm Bullet to Female Futaba 💡 Pro Tip: Always inspect your charge leads before race day — a clean, solid connection ensures safe charging and prevents false peak issues.  

Read more less

Reliable connectivity starts here — the FURITEK High Quality Female 2-Pin JST-PH cable delivers secure, consistent power transfer for your micro RC electronics. Built with precision and quality materials, it’s perfect for repairs, upgrades, or custom wiring projects. Product Specs: Connector Type: Female 2-Pin JST-PH Wire Length: 70mm High-quality construction for secure, low-resistance connections Ideal for micro RC motors, ESCs, batteries, and other electronics  

Read more less

Unlock faster, smarter charging for your TRX-4M with the Traxxas EZ-Peak® iD® Charger Port Adapter! Designed to work seamlessly with Traxxas EZ-Peak iD Chargers, this adapter lets you charge your TRX-4M 7.4V 2S LiPo battery with all the enhanced features—faster charge times, automatic detection, and storage charging modes. 🔋 Compatible With: TRX-4M⚡ Works With: Traxxas EZ-Peak iD Chargers✅ Enables high-speed charging✅ Allows access to iD Charger features like storage mode✅ Genuine Traxxas part for a perfect fit Upgrade your charging game and get back on the trail faster!  

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less