Secure your batteries with confidence using the Powerhobby 25×450mm Battery Straps. Designed for strength and reliability, these straps keep your packs firmly in place during hard acceleration, jumps, and rough landings. Features & Benefits: Durable hook-and-loop design for a secure hold 25mm width x 450mm length fits a wide range of battery sizes Helps prevent battery movement during high-impact driving Ideal for racing, bashing, and high-power setups Includes: Battery strap(s) (25×450mm) A simple but essential upgrade to keep your battery locked in and your electronics protected.  

Read more less

Arrma Grom Assembled Oil-Filled Differential (30T) – Pre-Built & Ready to Install! ⚙️ Upgrade or Replace Your Differential with Ease! The Arrma Grom Assembled Oil-Filled Differential (30T) is a pre-assembled, high-performance replacement for the Granite Grom, Mojave Grom, Typhon Grom, and Losi NASCAR. Built for smooth power transfer and consistent handling, this durable, oil-filled diff is designed to withstand the rigors of off-road and high-speed racing. With two complete differentials and four included bearings, installation is quick and hassle-free! 🛠 Features:✔️ Pre-Assembled & Oil-Filled – No setup required, just install and go!✔️ Durable 30T Gear Design – Built for reliability and smooth operation✔️ Optimized for Performance – Maintains traction and power distribution✔️ Includes Bearings – Everything needed for a hassle-free replacement 📦 Includes: (2) Pre-Assembled Oil-Filled Differentials (30T) (4) Bearings 🚗 Compatibility:✅ Arrma Granite Grom✅ Arrma Mojave Grom✅ Arrma Typhon Grom✅ Losi NASCAR 🔩 Upgrade Your RC Car for Maximum Performance!

Read more less

Meet the EcoPower WP173 — a high-voltage, high-torque, high-speed aluminum micro servo built to dominate the 1/16 & 1/18 scale world. Waterproof, fully metal-geared, and engineered for precision, this servo is the ultimate upgrade for Traxxas®, Axial®, Losi®, Arrma® Grom™, TRX-4M™ (with mount), and more. Designed for brutal performance and long-term durability, the WP173 packs a coreless motor, an aluminum case, and torque numbers that punch way above its size. High-Performance Speed & Torque Whether you're racing, crawling, or bashing, the WP173 delivers lightning-fast response and incredible power: Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Smooth, crisp control — even under heavy load. Built for Abuse This servo is ready for the rough stuff: Full metal gear train Waterproof aluminum case Ball-bearing supported output Includes aluminum servo horn Long-lasting durability for harsh environments Wide Compatibility A true drop-in powerhouse for most micro platforms: Arrma® Grom Series:Gorgon • Granite • Mojave • Quake • Typhon Axial:1/18 Yeti Jr FMS:FCX18 • FCX24 • FCX24M Furitek:Cayman • Cayman Pro • FX118 • Gold Digger • Hiroyama • TerraX Losi:Mini Drag • Mini-B • Mini-T 2.0 • NASCAR Redcat:Ascent-18 Traxxas:TRX-4M™ & TRX-4MT™ (Requires EcoPower CNC Aluminum Servo Mount ECP-3072) Features: High torque + high speed performance Waterproof aluminum case Digital coreless motor Full metal gear construction Aluminum servo horn included 25-tooth output shaft (standard micro) Operates from 6V–8.4V Compact size for 1/16 & 1/18 models Built for racers, crawlers, and bashers Includes: (1) EcoPower WP173 Aluminum Digital Micro Servo (1) Aluminum Servo Horn (2) Composite Servo Horns Mounting Hardware Specifications: Application: 1/24, 1/16, 1/18 Input Voltage: 6V–8.4V Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Motor: Digital Coreless Output Shaft: 25T • 5mm Gear Material: Metal Dimensions: 23 × 12 × 31.75mm Weight: 23g Tech Notes: Do not exceed 8.4V. Waterproof, but prolonged submersion may weaken seals. TRX-4M platforms require the EcoPower ECP-3072 Aluminum Servo Mount.

Read more less

⚙️ Built stronger. Built to last. Upgrade your ride with the Hot Racing Front Steel CVD Axle Set, designed for the Losi NASCAR and the Arrma Grom series (Granite Grom, Mojave Grom, Typhon Grom) equipped with the Arrma Grom Suspension B Set. Featuring CNC-machined steel stub shafts and aluminum clamp-style hex hubs, these axles deliver superior strength, durability, and smooth performance over stock CVD dog bones and plastic shafts. ✅ Direct replacement for factory CVD dog bones✅ Heavy-duty CNC steel + aluminum construction✅ Pre-assembled for quick, hassle-free install✅ Compatible with ARA330839 front arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Smooth. Precise. Reliable.Keep your Arrma Grom-series vehicles running flawlessly with genuine Arrma 7x11x3mm Ball Bearings (ARA610053). These high-quality bearings reduce friction, improve drivetrain efficiency, and extend the life of your gears and shafts—essential for smooth, consistent performance on every run. Factory Fit. Race Ready.Each bearing is precision-sealed to resist dirt and moisture while maintaining low rolling resistance. Perfect as direct replacements for worn or gritty stock bearings, they’re built for long-lasting durability in both on-road and off-road conditions. 💪 Features: Genuine Arrma replacement part Precision-sealed bearings for smooth rotation and protection against debris Reduces drivetrain friction and wear Ideal for high-speed, high-load applications Direct fit for Grom-series vehicles 📦 Includes: (4) 7x11x3mm Ball Bearings ✅ Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Mojave Grom Arrma Quake Grom Arrma Typhon Grom Losi NASCAR    

Read more less

Assembled Differential 30T 0.8Mod V2 (1): GROMARRMA – ARA311177V2 Keep your 1/12 Losi NASCAR RC Race Car running smooth with the ARRMA Assembled Differential 30T 0.8Mod V2. This factory-assembled differential is built for durability and precision, ensuring efficient power transfer and reliable performance on the track. ⚡ Features: Fully assembled 30T 0.8Mod differential Heavy-duty design for consistent performance Precision fit for long-lasting durability Direct drop-in replacement for easy installation 📦 Includes: (1) Assembled Differential 30T 0.8Mod V2 Compatibility: ARRMA GROM 1/12 Losi NASCAR RC Race Car Part #: ARA311177V2

Read more less

Keep your steering sharp and your servo protected with the Arrma Grom Servo Saver Set. Designed as a direct replacement for stock components, this set offers a precise fit and easy installation on multiple 1/18 and 1/12 scale platforms. 🔧 Features:✅ Direct replacement for stock servo saver✅ Protects your servo during impacts✅ Factory-installed on Grom series and Losi NASCAR✅ Precision fit for quick and easy install 📦 Includes:(1) Servo Saver Set 🚗 Compatibility:• Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi 1/12 NASCAR Race Car

Read more less

Dial in your suspension and steering geometry with the Hot Racing Aluminum Adjustable Camber & Steering Links Set, engineered specifically for the Losi NASCAR platform. Designed for precision, durability, and easy tuning, this upgrade gives you greater control over handling and steering response. Machined from durable aluminum, these adjustable links replace the stock components to provide increased strength and more accurate alignment control. Quick camber and toe-in adjustments allow you to fine-tune your setup for different track conditions, improving steering feel, stability, and overall performance. Built for OEM fitment, installation is straightforward and hassle-free. Features CNC-machined aluminum construction for increased strength Adjustable design for precise camber and toe-in tuning Improves steering response and handling consistency Durable upgrade over stock plastic links OEM fit for easy installation and proper geometry Includes (1) Aluminum Adjustable Camber & Steering Links Set A perfect upgrade for racers and drivers looking to improve durability, tuning flexibility, and on-track performance from their Losi® NASCAR.  

Read more less

Arrma Differential Cover Set (2-Pack) Protect & Maintain Your Differential The Arrma Differential Cover Set is a direct replacement part designed for Arrma Grom series vehicles and Losi NASCAR models. Built for durability and precision fit, these covers help protect your differential from dirt, debris, and damage, ensuring smooth and reliable performance on any terrain. Includes: ✅ (2) Differential Covers✅ Mounting Hardware Compatibility: ✔ Arrma Granite Grom✔ Arrma Mojave Grom✔ Arrma Typhon Grom✔ Losi NASCAR

Read more less

Upgrade front-end durability with this Powerhobby aluminum front gear box. CNC-machined from aluminum and anodized for a clean finish, it’s a direct replacement for the stock unit and helps reduce flex under load. Features: CNC-machined aluminum construction Increased strength and rigidity over stock plastic Precision fit for reliable drivetrain performance Available in Black, Red, or Blue anodized finishes Direct replacement design Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6565    

Read more less

Upgrade rear drivetrain strength and durability with this Powerhobby aluminum rear gear box. CNC-machined from aluminum and anodized for a clean finish, this gearbox is a direct replacement for the stock unit and helps reduce flex under load. Features: CNC-machined aluminum construction Increased strength and rigidity over stock plastic Precision fit for reliable drivetrain performance Available in Black, Red, or Blue anodized finishes Direct replacement design Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA320749Part Number: PHB6564 Ideal for racers and bashers looking to improve rear-end durability and add a custom look to their Grom or NASCAR platform.  

Read more less

Upgrade your steering with this Powerhobby aluminum steering set, designed to replace the stock plastic parts and add durability and precision to your GROM or NASCAR platform. CNC-machined for strength and finished in three anodized color options, this set enhances reliability without sacrificing style. Features: CNC-machined aluminum construction Increased strength and reliability over stock components Precision fit for improved steering control Available in Black, Red, or Blue anodized finishes Fits: Arrma 1:18 Granite Grom Arrma 1:18 Mojave Grom Arrma 1:18 Typhon Grom Losi 1:12 AWD NASCAR Replaces: ARA340202Part Number: PHB6566 Ideal for racers and bashers looking to upgrade steering durability and add a custom color pop to their setup.  

Read more less

Improve steering strength and mounting flexibility with this Powerhobby 6061 aluminum two-position servo mount. CNC-machined from durable 6061 aluminum, this mount is a direct replacement for the stock servo mount and offers increased rigidity and reliability. Features: CNC-machined 6061 aluminum construction Two-position servo mounting design Increased strength over stock plastic mount Precision fit for consistent steering performance Direct replacement installation Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA320753Part Number: PHB6745 Ideal for racers and bashers looking to upgrade durability and steering reliability on their Grom or NASCAR platform.  

Read more less

Upgrade strength and adjustability with this Powerhobby aluminum adjustable motor mount. CNC-machined from aluminum and finished in blue, this mount is designed as a direct replacement for the stock motor mount, offering improved durability and precise motor positioning. Features: CNC-machined aluminum construction Adjustable motor mount design Increased strength over stock plastic mount Blue anodized finish Direct replacement for factory motor mount Fits: Arrma 1:18 Granite Grom Arrma 1:18 Mojave Grom Arrma 1:18 Typhon Grom Losi 1:12 AWD NASCAR Replaces: ARA320744 Part Number: PHB6744 Ideal for racers and bashers looking to improve durability, adjustability, and reliability in their Grom or NASCAR drivetrain setup.  

Read more less

Upgrade durability and drivetrain efficiency with this Powerhobby aluminum motor mount, designed for Grom platforms and NASCAR. This motor mount supports a wide pinion range and helps improve power transfer while reducing motor heat. Features: CNC-machined aluminum construction Supports 16T–27T pinions Designed for stock 59T spur gear Improves power transfer Helps reduce motor overheating Direct replacement for stock motor mount Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA320744 Part Number: PHB6743 Ideal for racers and bashers looking for improved gearing flexibility, reliability, and thermal performance on their Grom or NASCAR setup.      

Read more less

Upgrade steering durability and consistency with this Powerhobby aluminum 20T stock servo saver. Designed as a direct replacement for the factory unit, this servo saver offers improved strength and reliability while maintaining proper steering protection. Features: CNC-machined aluminum construction 20-tooth (20T) spline Increased durability over stock plastic servo saver Direct replacement design for easy installation Fits: Arrma Mojave Grom Arrma Typhon Grom Losi 1:12 AWD NASCAR Part Number: PHB6740 Ideal for racers and bashers looking to reduce flex, improve steering response, and add long-lasting reliability to their Grom or NASCAR platform.    

Read more less

Upgrade durability and front suspension strength with these Powerhobby aluminum front upper arms. CNC-machined from aluminum and anodized for a clean finish, these arms are a direct replacement for the stock components and help reduce flex during hard driving. Features: CNC-machined aluminum construction Increased strength over stock plastic arms Precision fit for consistent suspension geometry Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6846 Ideal for racers and bashers looking to improve durability while adding a custom look to their NASCAR or Grom platform.  

Read more less

Upgrade your front-end strength and steering precision with this Powerhobby aluminum steering knuckle. CNC-machined from high-quality aluminum, this is a direct replacement for the stock plastic part, offering improved durability and consistent steering performance. Features: CNC-machined aluminum construction Increased strength and durability over stock Precision fit for smooth, reliable steering Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA330841 Perfect for racers and bashers looking to reduce flex, improve reliability, and add a custom look.  

Read more less

Refresh your hardware and keep your rig running strong with the Arrma 3x24mm Button Head Screw Pin Set. Designed as a direct replacement for stock kit components, these screw pins deliver reliable fitment and durability for repeated wrench sessions and rough terrain. Ideal for repairs, maintenance, or building a parts bin, this set gives you everything you need to keep your suspension and linkages tight and secure. 🟢 Features Direct stock replacement hardware Durable steel construction Precision fit for secure assembly Great for routine maintenance or rebuilds 📦 Includes (10) 3x24mm Button Head Screw Pins 🔧 Compatibility Designed for the following models: Arrma Gorgon Grom Granite Grom Mojave Grom Quake Grom Typhon Grom Losi NASCAR 🏁 Keep Your Rig Running Tight A must-have hardware pack for anyone running the latest Grom-platform rigs—simple, durable, and ready to install.

Read more less

Officially Licensed NASCAR Style. Track-Proven Performance. Upgrade your Losi NASCAR GROM with the Ross Chastain #1 Busch Light 2025 Body, delivering the authentic look and attitude of Chastain’s real-world race car. This pre-painted, officially licensed body features high-quality graphics, durable construction, and pre-installed details for a race-ready fit right out of the box. Premium Ready-to-Run Detail Each body comes pre-painted with official Busch Light 2025 graphics, decal sheet pre-applied, and paint protection film installed to keep your GROM looking fresh after every run. Precision pre-drilled body mounts make installation effortless — just drop it on and go racing. Features: Officially licensed Ross Chastain #1 Busch Light 2025 body Pre-painted and pre-decaled for instant realism Paint protection film pre-installed to prevent scratches Durable molded body for long-lasting performance Pre-drilled mounting holes for direct fit on all NASCAR GROM vehicles Includes rear spoiler for added scale realism Includes: (1) Officially Licensed 2025 #1 Busch Light NASCAR GROM Body (1) Rear Spoiler Paint Protection Stickers (pre-installed) Compatibility: Losi NASCAR GROM Losi — Official NASCAR Performance in Mini Scale.

Read more less

Officially Licensed NASCAR Style for Your GROM. Bring championship looks to your Losi NASCAR GROM with the Christopher Bell #20 DeWalt 2025 Body Set. This officially licensed body features authentic graphics, precision detailing, and durable construction — built to capture the look of Bell’s powerful #20 DeWalt Toyota on the track. Perfect for racers and collectors, this body delivers premium realism and performance-ready design. Features: Officially licensed NASCAR Christopher Bell #20 DeWalt 2025 design High-quality molded body for durability and scale appearance Detailed printed graphics replicate the real DeWalt Toyota scheme Direct fit for Losi NASCAR GROM chassis Perfect upgrade for replacement, customization, or display Includes: (1) Christopher Bell #20 DeWalt 2025 NASCAR GROM Body Compatibility: Losi NASCAR GROM Losi — Where Real Racing Meets RC Power.

Read more less

The Arrma Granite Grom Front & Rear Hubs are genuine factory replacements designed to keep your 1/18-scale Grom platform vehicles running smooth and true. Built from durable composite material, these precision-molded hubs maintain proper alignment and ensure long-lasting performance through every bash session. ✅ Factory OEM Replacement – perfect fit and easy installation✅ Durable Composite Construction – strong, lightweight, and impact-resistant✅ Complete Set – includes front and rear hubs with mounting hardware Includes: (2) Front Hubs (2) Rear Hubs (4) Mounting Screws Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Quake Grom Arrma Typhon Grom Part #: ARA330807

Read more less

The Arrma Mojave Grom Steering Knuckles & Rear Hubs Set (B) provides durable, factory-fit replacements to keep your suspension and steering performing like new. Designed for precision fit and smooth operation, these molded composite parts ensure reliable handling and impact resistance on your 1/18-scale Mojave Grom. ✅ Factory Replacement Components – direct OEM fit for the Mojave Grom platform✅ Includes Front & Rear Components – complete hub and knuckle replacement set✅ Durable Composite Construction – built to handle tough driving conditions Includes: (2) Steering Knuckles (2) Rear Hubs Compatibility: Arrma Mojave Grom Losi NASCAR Part #: ARA330841

Read more less

Precision Fit. Proven Strength. Keep your suspension smooth and your control arms tight with the Arrma 2.5x37mm Hingepins — genuine factory replacements built for precision alignment and lasting durability. Whether you’re rebuilding after a tough run or refreshing your Grom for the next bash, these steel hingepins keep your suspension moving freely and securely. Reliable Performance Crafted from high-quality steel, these hingepins provide consistent performance under high-impact conditions. Perfect for racers and bashers alike, they help maintain accurate suspension geometry and prevent unnecessary wear in high-stress areas. Features: Durable steel construction for long-lasting performance Precision-machined fit maintains accurate suspension alignment Direct replacement for stock components Ideal for rebuilds or maintenance on your Grom or Losi NASCAR Includes: (4) 2.5×37 mm Hingepins Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Mojave Grom Arrma Quake Grom Arrma Typhon Grom Losi NASCAR Arrma Tough — Built for Real RC Action.  

Read more less

⚙️ Complete Replacement Hub Assembly for Grom PlatformsThe Arrma Front & Rear Wheel Hub Assembly Set provides everything you need to restore smooth, efficient drivetrain performance on your Granite Grom or Typhon Grom. Designed for precision fit and durability, this prepackaged set includes all the necessary components to rebuild or replace all four wheel hubs — front and rear. 🌟 Features Genuine Arrma replacement parts for perfect fit and performance Includes front and rear hub assemblies for complete vehicle coverage Durable composite construction built to withstand off-road abuse Ensures smooth rotation and consistent wheel alignment Ideal for maintenance, rebuilds, or repairs 📦 Includes (4) Complete Wheel Hub Assemblies (Front & Rear) All necessary bearings, hardware, and components ✅ Compatibility Arrma Granite Grom Arrma Typhon Grom 💪 Keep your Grom running at peak performance with this genuine Arrma wheel hub assembly set — precision-engineered for durability and reliability on every drive.  

Read more less

🏁 Authentic NASCAR Style Meets Pro-Line PerformanceBring true NASCAR® realism and performance to your Losi® racecar with the Pro-Line Goodyear® Eagle Pre-Mounted Retro Truck Tires. Featuring officially licensed Goodyear® yellow sidewall lettering, larger sidewalls, and replica steel wheels, these tires perfectly capture the look and handling of classic NASCAR Truck Series racers. ⚙️ About the Goodyear Eagle Tires Designed for both performance and scale detail, these tires transform your Losi NASCAR into a true showpiece on and off the track. The soft compound delivers consistent grip and control, while the taller sidewall improves scale realism and cornering dynamics—ideal for truck series builds and retro NASCAR setups. 🌟 Features Officially licensed by NASCAR® and Goodyear® Perfect for Truck Series or Retro NASCAR builds Larger sidewalls for authentic scale proportions Yellow Goodyear® Eagle sidewall lettering for true realism Mounted on replica steel wheels for period-correct looks Made in the USA by Pro-Line Racing Durable soft compound for balanced grip and longevity 📦 Includes (4) Goodyear™ Eagle Pre-Mounted Retro Truck Tires 📏 Specifications Spec Detail Scale 1/12 Overall Diameter 2.23 in (57 mm) Width 1.1 in (28 mm) Hex Size 8 mm 🔥 Upgrade your Losi NASCAR with the official Goodyear look — where scale style meets race-day performance!

Read more less

The ARRMA Input Gear Set is a genuine replacement part designed to keep your drivetrain running strong. Built for durability and smooth power transfer, this set ensures your vehicle stays reliable under racing and bashing conditions. ⚡ Features: Precision-machined for smooth gear mesh Durable steel construction for long life Direct replacement for factory parts Designed for consistent performance under load 📦 Includes: (1) Input Gear Set Compatibility: ARRMA GROM 1/12 Losi NASCAR RC Race Car Part #: ARA311182

Read more less

Keep your RC ride race-ready with this pack of Arrma 2.5x8mm Cap Head Screws. Designed as a direct replacement for stock hardware, these high-quality screws are a must-have for routine maintenance or repairs. 🔧 Features: ✅ Precision-made 2.5x8mm cap head screws✅ Ideal for replacing worn or stripped hardware✅ Durable steel construction for lasting performance 📦 Includes: (10) 2.5x8mm Cap Head Screws 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi NASCAR

Read more less