Keep your drivetrain running smoothly with the Team Associated 54T Idler Gear for the 3-gear gearbox. This replacement idler gear is designed for RC10B7, RC10T7, and RC10SC7 platforms, delivering reliable power transfer and consistent performance. Precision molded for proper mesh and durability, this gear is ideal for replacing worn or damaged components to maintain drivetrain efficiency and smooth operation. 🔧 Features:• Replacement 54T idler gear for 3-gear gearbox• Designed for RC10B7, RC10T7, and RC10SC7 platforms• Precision molded for smooth gear mesh• Durable construction for long-lasting performance• Ideal maintenance or replacement part 📦 Includes:• (1) 3-Gear Gearbox Idler Gear ⚙️ Specifications:• Tooth Count: 54T• Gearbox Type: 3-Gear• Position: Idler Gear Keep your drivetrain dialed in with the Team Associated 54T idler gear, built for smooth performance and dependable durability.    

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Gain a competitive edge with the R1WURKS Ultra-Lightweight Titanium HD CVA Bones, engineered to dramatically reduce drivetrain rotating mass for faster acceleration and improved responsiveness. Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium, these CVA bones are designed specifically for high-performance stock racing applications. Optimized for 17.5T and 21.5T classes, they help deliver sharper throttle response, smoother braking, and improved cornering agility. ⚡ Ultra-Lightweight Racing Advantage Weighing only 6.0g for the pair, these CVA bones are 38.78% lighter than standard bones, significantly reducing rotational inertia in the drivetrain. Less rotating mass allows the drivetrain to spin up and slow down faster, giving racers improved throttle control and braking response. This results in a car that feels more agile, responsive, and efficient on the track. 🏁 Improved Efficiency & Performance The reduction in drivetrain mass also improves overall efficiency, helping reduce motor load and lower motor temperatures during long runs. Combined with improved power transfer, this helps racers maintain consistent performance throughout heats and mains. ⚙️ Features Ultra-lightweight design at 6.0g per pair 38.78% lighter than standard CVA bones Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium Reduces drivetrain rotational inertia Improves acceleration and braking response Enhances cornering agility and vehicle responsiveness Improves drivetrain efficiency and power transfer Helps reduce motor temperatures Laser-etched logos and identification markings 📦 Includes (2) Titanium CVA Bones 🔧 Compatibility TLR 22X TLR 22 5.0 Replaces: TLR232138 A premium performance upgrade for competitive racers looking to reduce drivetrain weight, improve responsiveness, and maximize efficiency on the track.  

Read more less

Refresh your drivetrain and keep your 22X-T running smooth with the Essentials Bearing Kit. Designed to replace the key high-wear bearings in your truck, this kit reduces friction, improves efficiency, and restores that free-spinning feel every racer wants. Perfect for maintenance rebuilds or race-prep freshening before a big event. Includes (8) 5x10x4mm Revolution Bearings (Greased) (4) 10x15x4mm Rubber Shielded Bearings (Greased) (2) 5x13x4mm Revolution Bearings (Greased) Features Direct fit for TLR 22X-T High-performance Revolution series bearings Pre-greased for durability and longevity Rubber shielded where needed for debris protection Reduces drivetrain drag Improves smoothness and consistency Keep your 22X-T efficient, free, and race-ready with a fresh set of quality bearings. 🏁    

Read more less

The Team Associated 3-Gear Gearbox Set is a genuine replacement assembly designed for the RC10B7, RC10T7, and RC10SC7 platforms. Built to factory specifications, this gearbox set ensures proper drivetrain alignment, durability, and smooth power delivery. Whether you're rebuilding after heavy track use or replacing damaged components, this 3-gear configuration maintains the performance and reliability expected from Team Associated race platforms. Features Genuine Team Associated replacement part 3-gear gearbox configuration Factory-fit for proper alignment and durability Maintains smooth and efficient power transfer Includes (1) 3-Gear Gearbox Set Compatibility Team Associated RC10B7 Team Associated RC10T7 Team Associated RC10SC7 A reliable drivetrain replacement to keep your buggy or truck performing at its best. 🏁    

Read more less

Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

Strengthen your chassis and reduce front-end tweak with the Vision Racing (VR) Carbon Chassis Standoff Brace Set. Designed for carbon fiber chassis platforms, this upgrade adds rigidity where it matters most while keeping weight low and looks clean. Featuring dual-mounting aluminum standoffs, this brace helps stabilize the front section of the chassis under load, improving consistency and feel—especially on high-grip tracks and during hard landings. Features & Benefits: Reduces front-end chassis tweak Adds rigidity to carbon fiber chassis Dual-mount aluminum standoffs for strength and stability Lightweight, race-focused design Clean, stylish finish that complements carbon chassis builds Compatibility: Team Associated B7 Team Associated B7D Team Associated T7 Team Associated SC7 Includes: Carbon chassis standoff brace set with aluminum standoffs A solid first impression from Vision Racing—functional, clean, and built for racers looking to tighten up their chassis performance.  

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

Replace or upgrade your rear suspension with this Team Associated carbon fiber rear shock tower, designed specifically for the RC10T7 platform. Made from lightweight, rigid carbon fiber, this shock tower provides precise shock mounting and consistent suspension geometry for racing or bashing. Features: Lightweight carbon fiber construction High rigidity for consistent suspension performance Precision fit for the RC10T7 platform Direct replacement for the stock rear shock tower Includes: (1) RC10T7 Rear Shock Tower Compatibility: Team Associated RC10T7 Team Associated RC10SC7 Part Number: 71208 Ideal for racers looking to maintain factory geometry or replace a damaged rear shock tower with a genuine Team Associated part.  

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

The XRAY Composite Front Bridge Upper Deck provides extra rigidity and stability to your chassis setup. Precision-molded from high-quality composite material, this part is designed for strength without unnecessary weight, giving your buggy the perfect balance of performance and durability. Features: Molded composite construction for strength and consistency Helps increase front-end stability Lightweight design maintains optimal chassis flex Direct replacement part for quick installation Compatibility: XRAY XB2 (various years) XRAY XT2 (various years)

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm) [71161]🛞 Dial in that perfect front-end feel!Upgrade your T6.2 or SC6.2 with the 13mm Front Shock Springs in Grey (4.60 lbs/in). At 54mm long, these springs are engineered for plush low-speed bump absorption and strong high-speed support. That means more grip, better landings, and next-level consistency lap after lap.💥 Features:✅ Grey rate: 4.60 lbs/in✅ Length: 54mm✅ Designed for 13mm bore shocks✅ Ideal balance of soft feel and responsive support✅ Includes 2 springs📦 Part Number: 71161🏁 Brand: Team Associated

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

🔋⚡ Reliable 2S LiPo Charging Made EasyThe Yeah Racing 2S LiPo XT60 Charge Lead is a pre-soldered charging cable designed to provide a simple, dependable connection between your charger and 2S LiPo batteries. Featuring a female XT60 connector, 5mm bullet connectors, and a 3-pin JST-XH balance plug, this charge lead supports safe, accurate charging while eliminating the need for custom wiring or soldering. 🔋 About the 2S LiPo Charge Lead ⚡ Ready to Use This charge lead comes fully assembled and pre-soldered, allowing you to start charging your compatible 2S LiPo batteries right out of the package. 🔌 Wide Charger Compatibility Equipped with 5mm bullet connectors, the cable is compatible with many popular RC battery chargers that use standard 5mm charging outputs. 🛡️ Safe Balance Charging The integrated 3-pin JST-XH balance connector allows your charger to properly monitor and balance each cell during charging, helping maximize battery performance and lifespan. 📏 Convenient Cable Length With an overall length of approximately 350mm, the cable provides plenty of flexibility for organizing your charging station. 🔧 Features ✔ Pre-soldered and ready to use✔ Female XT60 battery connector✔ 5mm bullet charger connectors✔ 3-pin JST-XH balance connector✔ Designed for 2S LiPo battery charging✔ Supports accurate balance charging✔ Approximately 350mm cable length✔ Durable, reliable construction 📦 Includes (1) Yeah Racing 2S LiPo XT60 Charge Lead 📊 Specifications Specification Details Battery Compatibility 2S LiPo Battery Connector XT60 Female Charger Connector 5mm Bullet Connectors Balance Connector 3-Pin JST-XH Cable Length 350mm (Approx.) 🚗 Compatibility Compatible with: 2S LiPo batteries equipped with an XT60 connector Battery chargers using 5mm bullet charging outputs Chargers with a 3-pin JST-XH balance port Always verify connector compatibility before charging. ⚠️ Notes Designed specifically for 2S LiPo battery charging. Not intended for charging batteries with different cell counts. Always use a compatible LiPo charger and follow proper LiPo charging safety procedures. Inspect charging leads regularly and replace if connectors or wiring become damaged.

Read more less

🔋⚡ High-Current Charging with Maximum Efficiency The ProTek RC 2S High Current Charge/Balance Adapter is designed for hobbyists who demand reliable, low-resistance charging performance. Built with heavy-duty 10AWG wire and gold-plated 4mm bullet connectors, this premium adapter is ideal for safely charging or discharging 2S LiPo batteries at higher current levels. The 24-inch coiled cable provides excellent reach while helping keep your charging station organized and free from tangled wires. 🔋 About the 2S High Current Charge Adapter ⚡ Built for High-Current Charging Heavy-duty 10AWG wire minimizes resistance and voltage loss, allowing efficient power transfer during high-current charging and discharging applications. 🔌 Premium Low-Resistance Connections Gold-plated 4mm solid bullet connectors provide a secure, reliable connection while reducing electrical resistance for improved charging efficiency. 🎯 Accurate Balance Charging An integrated 2S XH balance connector ensures proper cell balancing for safer charging and improved battery performance. 🛠️ Organized & Flexible Design The flexible coiled cable helps prevent tangles while providing approximately 24 inches of reach, making it easy to position your batteries during charging. 🔧 Features ✔ Heavy-duty 10AWG wire for high-current charging✔ Gold-plated 4mm solid bullet connectors✔ 2S XH balance connector for accurate balance charging✔ Compatible with chargers using 4mm bullet outputs✔ Low-resistance design for efficient power transfer✔ Flexible coiled cable helps prevent tangles✔ 24-inch cable length for added convenience✔ Ideal for charging or discharging 2S LiPo batteries 📦 Includes (1) ProTek RC 2S High Current Charge/Balance Adapter (4mm to 4mm Solid Bullets) 📊 Specifications Specification Details Battery Compatibility 2S LiPo Charge Connector 4mm Solid Bullet Balance Connector 2S XH Wire Gauge 10 AWG Cable Length 24in Version V1 🚗 Compatibility Compatible with: Chargers equipped with 4mm bullet charging outputs 2S LiPo batteries using an XH balance connector ⚠️ Notes Designed for charging and discharging 2S LiPo batteries. Verify connector compatibility with your charger and battery before use. Always follow proper LiPo charging safety procedures and never leave batteries unattended while charging.

Read more less

🔋⚡ Run Your 5mm Battery With Existing 4mm Connectors! The ProTek RC 5mm to 4mm Bullet Reducers are a simple and effective solution for racers using batteries equipped with 5mm bullet ports while maintaining 4mm bullet connectors on their ESC and charging equipment. These adapters eliminate the need to change connectors, allowing you to continue using your existing electronics and charge leads with newer battery packs. A must-have accessory for racers with mixed battery and connector setups. 🏁 About the Bullet Reducers 🔌 Simple Plug-and-Play Solution Simply insert the reducer into a battery's 5mm bullet socket to instantly create a 4mm bullet connection. ⚡ Maintain Existing Electronics Perfect for racers who: Use 5mm battery connectors Have ESCs with 4mm bullets Use charge leads with 4mm bullets No soldering or rewiring required. 🏎️ Race-Day Convenience Keep a set in your pit box to ensure compatibility between different battery and electronics setups. 🔧 Features ✔ Converts 5mm battery bullet ports to 4mm bullet ports✔ Allows use of existing 4mm ESC connectors✔ Compatible with 4mm charge leads✔ Quick and easy installation✔ No soldering required✔ Ideal for racing and hobby applications✔ Compact and lightweight design 📦 Includes (2) ProTek RC 5mm to 4mm Bullet Reducers 💡 Perfect For ✔ Competitive racers✔ Mixed battery connector setups✔ ESC compatibility upgrades✔ Battery charging applications✔ Pit box spare parts ⚠️ Notes Designed for use with batteries featuring 5mm bullet sockets Allows compatibility with standard 4mm bullet connectors

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less

Upgrade your rear suspension with genuine Factory Team Carbon Rear Suspension Arms for the RC10T7 and RC10SC7 platforms. Designed for racers who demand precision and consistency, these arms increase rigidity and reduce flex under high-load conditions, giving you a more predictable and controlled feel on the track. Built using AE’s legendary carbon composite material, they offer the perfect balance of strength, durability, and lightweight performance — exactly what competitive racing requires. Features Factory Team performance upgrade Constructed from AE carbon composite material Increased rigidity over stock arms Reduces flex under hard cornering and acceleration Enhances durability and structural integrity Improves overall handling consistency Includes (2) Rear Factory Team Carbon Suspension Arms Designed specifically for: RC10T7 RC10SC7 A race-proven upgrade that delivers stronger, more consistent rear-end performance when it matters most. 🏁  

Read more less

The Team Losi Racing 22X DC Wide Steering Spindle Knuckles are genuine replacement components designed for the 22X DC 2WD buggy platform. These wide knuckles help maintain proper front-end geometry and durability while ensuring precise steering response and consistent performance on the track. Built to factory specifications, they provide a direct-fit solution for repairs or routine maintenance, keeping your 22X platform race-ready. Features Genuine TLR replacement parts Wide steering spindle design Maintains correct front-end geometry Durable construction for racing conditions Direct-fit compatibility Includes (2) Wide Steering Spindle Knuckles Compatibility Losi 22X Losi 22X-T A reliable replacement to keep your steering system tight, responsive, and competition-ready. 🏁  

Read more less

More punch. More durability. More tuning freedom. The Exotek TLR 22X Locked Spur Mount Set is a high-performance upgrade designed to reduce rotating mass while increasing drivetrain strength and responsiveness. Precision-machined from lightweight aluminum and paired with a durable titanium center bolt, this setup delivers quicker acceleration and improved throttle response — exactly what stock class racers demand. This mount allows you to easily switch between a locked spur configuration or a slipper setup, giving you instant adaptability to match track conditions. Whether you’re looking for maximum forward drive on high-bite carpet or tuning consistency on clay, this system provides the flexibility to dial in your drivetrain. Fully compatible with Exotek and Kimbrough spur gears, it mounts directly to the stock 22X top shaft for a seamless installation. Features: Lightweight aluminum construction Durable titanium center bolt Reduces rotating mass for improved acceleration Allows quick conversion between locked spur and slipper Compatible with Exotek and Kimbrough spur gears Direct mount to stock 22X top shaft Designed for competitive 22X racing Includes: (1) TLR 22X Locked Spur Mount Set w/Titanium Bolt Built for racers who want sharper throttle response, increased drivetrain durability, and the flexibility to adapt to any surface.  

Read more less

Dial in sharper handling and increased chassis rigidity with the Team Losi Racing 22X Stiffezel Side Guards. Designed for competitive racers, these upgraded side guards offer increased stiffness over stock components, improving precision and stability on high-bite surfaces. Constructed from TLR’s Stiffezel material, these guards reduce chassis flex, delivering more direct suspension response and improved consistency through high-speed corners. The added rigidity helps the car stay planted and predictable, especially on high-traction tracks where flex control becomes critical. Whether you’re fine-tuning your setup for carpet, clay, or prepared dirt, these side guards offer a proven tuning option to maximize performance. Features: Stiffer and stronger than stock side guards Reduces chassis flex for improved precision Enhances suspension response and consistency Improves control in high-speed turns Optimized for high-bite and traction-heavy surfaces Direct fit for 22X platforms Includes: (2) 22X Stiffezel Side Guards Built for racers who want sharper steering response, increased stability, and a more locked-in feel on demanding race surfaces.

Read more less

Upgrade your pit setup with the 1UP Racing Pro Pit Tray Set with Shock Stands Combo—a sleek, all-in-one workspace solution built for racers who demand organization, efficiency, and professional presentation. This complete pit system features precision-machined aluminum construction with a dual satin and gloss black finish for a high-end look. The tray is designed with the perfect depth, smooth filleted corners, and dedicated cutouts for differential outdrives, keeping parts secure and easy to access. Hidden magnets hold body clips in place and securely attach the included on-road and off-road shock stands. Both shock stands feature forged carbon trays and magnetically collapse into the included protective storage box with foam inserts, making transport clean and safe. Features Precision-machined aluminum pit tray Dual satin & gloss black finish Ideal tray depth with smooth filleted corners Hidden magnets for body clip storage Differential outdrive cutouts Includes on-road and off-road shock stands Shock stands magnetically attach to tray Forged carbon shock stand trays Protective storage box with foam insert included Includes (1) Pro Pit Tray (1) Off-Road Shock Stand (1) On-Road Shock Stand (1) Storage Box with Foam Insert A premium pit solution designed to keep your workspace organized, efficient, and race-ready—every time you wrench. 🏁  

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Maintain precise front suspension geometry with the XRAY Composite Front Lower Arm Mount. This genuine replacement part is designed for the 2024 XB2 and XT2 platforms, making it ideal for repairs, rebuilds, or keeping critical spares on hand. Features & Benefits: Composite construction for strength, durability, and controlled flex Precision molded for accurate fit and consistent suspension alignment Direct replacement for kit-supplied front lower arm mount Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt Includes: (1) Composite front lower arm mount A must-have replacement to keep your XRAY suspension dialed and race-ready.    

Read more less

Body Mounts Overview:The Team Losi Racing 22X-T Body Mount Set is a direct replacement designed to properly secure the body on your 22X-T truck. Built to factory specifications, these mounts ensure correct body alignment and a secure fit for reliable performance on the track. 🔧 Key Features Direct replacement body mount set Maintains proper body positioning and fitment Durable construction for race and practice use Designed specifically for the 22X-T platform 📦 Includes (1) Body Mounts Set 🚗 Compatibility Team Losi Racing 22X-T Ideal for repairs or refreshes, this body mount set keeps your 22X-T looking clean and performing as intended.  

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less