ProTek R/C CA Tire Glue – Medium Viscosity (0.75oz) Fast, Reliable Bonds for R/C Tires and More ProTek R/C CA Tire Glue delivers high-performance bonding in a compact bottle. With a medium viscosity and a 5–10 minute dry time, it's perfect for securing rubber tires to plastic R/C wheels — and works great on nearly any material. 🧪 Features: ✅ Medium Viscosity – Ideal balance for controlled flow and penetration ✅ 5–10 Minute Dry Time – Workable and fast-setting ✅ Versatile Bonding – Great for rubber, plastic, and more ✅ Compact 0.75oz Bottle – Fits easily in your toolbox or pit bag ✅ Includes Glue Tip – (Additional tips available: PTK-1571) ⚠️ Note: ❌ Not foam safe 🧊 Store in a cool, dry environment for best shelf life Whether you're mounting tires or tackling repairs at the track, ProTek CA Glue gets the job done with strong, dependable results.

Read more less

This is the ProTek R/C Pit Mat. The ProTek R/C pit mat will take your work space from suitable, to stunning. With a 24 x 48 footprint and nearly 8 square feet of coverage, this mat is the perfect size for your work space. Made from durable 4mm thick foam material, this mat is easy to clean, roll up and store away. Plus, unlike other pit mats, the ProTek R/C Pit Mat includes a closeable mesh carry bag that makes it easy to throw the mat over your shoulder and haul around. Ditch the dirty towels and silly rubber mats, and start wrenching like a boss with this high quality mat from ProTek R/C. Features: Approximately 24 x 48 in. (60 x 120 cm) Textured surface helps to prevent parts rolling onto the floor 4mm thick padded material provides clean, flat, anti-fatigue surface Closeable, mesh bag makes for easy storage and transportation. Eye-catching ProTek R/C Styling!

Read more less

Product Overview Designed to be color coordinated (e.g. Red uses all red wires and sheath) for charging 2S battery packs through 12ga wire. Includes gold-plated 4mm to 5mm bullets on the battery end to cover all battery types and a 4mm bullet on the charging end. Comes with the popular XH 3pin balance plug, which most trim one of the plastic alignment rails with an x-acto to plug right into the charger instead of the balance port. Or you can use the included XH 7pin if you don't want to brave that. Balance leads are 2.5" (63.5mm) longer than the charge leads so they can easily be plugged into any charger design. Specifications Color Coordinated (all wires and sheath colors match). 12ga soft silicone wire at 2 feet long (610mm). Gold-plated bullets, 4mm to 5mm on battery end and 4mm on charger end. Balance leads are 2.5" (63.5mm) longer than charging leads. Comes with XH 3pin balance plug installed and includes XH 7pin. Tips You can skip using a balance board or changing out to the 7 pin adapter with this simple modification.   

Read more less

Traxxas EZ-Peak® Plus Charger – 4A NiMH/LiPo w/ iD® Auto Battery Detection Fast, Safe, Smart Charging for Traxxas Batteries The Traxxas EZ-Peak® Plus 4-Amp Charger is the perfect solution for hobbyists looking for simplicity, speed, and safety. Featuring iD® Auto Battery Identification, this charger automatically configures the optimal charge settings for any Traxxas iD-equipped battery—just plug it in and press start! ⚙️ Features: ⚡ Charges 5–8 Cell NiMH or 2S–3S LiPo Traxxas iD® Batteries 🔍 iD® Auto Battery Detection – No settings to adjust or balance plugs to connect 🔒 Built-in Safety Features – Protects against overcharging and short circuits 🔥 4-Amp Fast Charging – Get back on the track quicker 🧠 Advanced High-Resolution Peak Detection – Ensures full, safe charging every time ✅ Simple One-Button Operation 🔌 Compatible Battery Types: NiMH: 5–8 cells (6.0V–9.6V) LiPo: 2S–3S (7.4V–11.1V)Traxxas iD®-equipped batteries only 📦 Includes: (1) Traxxas EZ-Peak® Plus 4A NiMH/LiPo Charger (2970) (1) Power cord Spend less time charging and more time driving—perfect for beginners and pros alike!

Read more less

  EcoPower R/C Pit Mat – 35x23" Upgrade Your Workbench – Wrench Like a Boss Take your workspace from basic to pro-level with the EcoPower R/C Pit Mat. Designed for RC enthusiasts, this large-format mat offers nearly 6 square feet of clean, cushioned work area — perfect for building, tuning, and repairs. 🛠️ Features: ✅ Generous Size – 35x23" (90x60cm) for ample workspace ✅ Durable 4mm Foam – Cushioned, anti-fatigue surface ✅ Textured Surface – Keeps small parts from rolling away ✅ Easy to Clean – Wipe down, roll up, and store with ease Say goodbye to oily towels and slippery surfaces. Whether you’re in the shop or at the track, the EcoPower Pit Mat keeps your setup clean, professional, and ready for action.

Read more less

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) Durable Upgrade for Precision Fit & Adjustable Offset Upgrade your RC10 with the precision and strength of the Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex Set. CNC-machined and anodized for performance and style, these aluminum hexes offer a secure clamping design and are a great tuning option for adjusting track width and wheel fit. 🔧 Features: 🛠️ CNC-Machined Aluminum Construction – Lightweight, strong, and anodized for durability 🔒 Clamping Design – Secure fit with cap head screws prevents slipping during hard runs 🔁 Tuning Flexibility – Adjusts rear offset when used with compatible models 📦 Includes: (2) 7.0mm Clamping Hexes (2) Cross Pins (2) Cap Head Screws ⚙️ Compatibility Notes: ✅ Direct Fit For: RC10 B5M Factory Lite ✅ Optional Use On: T5M (stock offset), B5/B5M (adds offset) ⚠️ Requires: Team Associated HD Rear CVA Axle (ASC71019) 💡 Ideal for racers looking to fine-tune rear track width or reinforce wheel mounting with a reliable aluminum upgrade.

Read more less

Traxxas Power Cell 7-Cell Stick NiMH Battery Pack w/ iD Connector (8.4V/3000mAh)📦 Part #: TRA2923X Upgrade your RC runtime with the Traxxas Power Cell 7-Cell 3000mAh NiMH Stick Battery Pack, designed to deliver strong performance and reliability. With its 8.4V output and Traxxas iD connector, this pack offers extra voltage and extended run time over a standard 6-cell pack — giving your vehicle more punch and playtime. ⚙️ Features: 🔌 Traxxas iD High-Current Connector simplifies charging with iD-enabled chargers 🔋 3000mAh Capacity delivers enhanced performance and longer sessions 🧵 12-Gauge MAXX Cable Wire for superior current flow and flexibility 🪙 Gold-Plated Copper Terminals reduce resistance and improve efficiency ✅ Compatible with Traxxas models that support 7-cell flat packs Pair with the Traxxas EZ-Peak iD Charger for a worry-free charging experience. Perfect for users looking for more voltage and more runtime without upgrading to LiPo.

Read more less

Product Overview Designed to be color coordinated (e.g. Red uses all red wires and sheath) for charging 2S battery packs through 12ga wire. Includes an XT60 plug on the charger end and gold-plated 4mm to 5mm bullets on the battery end to cover all battery types. Comes with the popular XH 3pin balance plug, which most trim one of the plastic alignment rails with an x-acto to plug right into the charger instead of the balance port. Or you can use the included XH 7pin if you don't want to brave that. Balance leads are 2.5" (63.5mm) longer than the charge leads so they can easily be plugged into any charger design. Specifications Color Coordinated (all wires and sheath colors match). 12ga soft silicone wire at 2 feet long (610mm). XT60 plug on charger end. Gold-plated 4mm to 5mm bullets on battery end. Balance leads are 2.5" (63.5mm) longer than charging leads. Comes with XH 3pin balance plug installed and includes XH 7pin. Tips You can skip using a balance board or changing out to the 7 pin adapter with this simple modification.   

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

Team Associated Factory Team Carbon Front Gullwing Arms – RC10B74.2 Increased Response for High-Traction Tracks Upgrade your RC10B74.2 or B74.2D with these Factory Team Carbon Front Gullwing Suspension Arms, designed for racers who demand sharper handling on high-grip or smooth surfaces. The carbon material increases stiffness, delivering enhanced steering response and cornering precision. 🔩 Features: 🏁 Carbon construction for added rigidity 🎯 Designed for smoother surfaces and high-traction conditions 🔧 Direct replacement for stock gullwing arms 🧩 Includes suspension arm spacers for proper fit 📦 Includes: (1) Left Front Carbon Gullwing Arm (1) Right Front Carbon Gullwing Arm (2) Suspension Arm Spacers ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🏆 Dial in your front-end for faster response and refined control where it matters most.

Read more less

  The Pro-Line Badlands MX43 Pro-Loc All Terrain Tire is the ultimate tire solution for X-MAXX owners. Pro-Line Badlands take the Motocross inspired tread and elevate the look a Bigger and Bolder knobby tread that matches modern MX tires. These tires have been developed from the ground up for extreme X-MAXX punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. Pro-Line X-MAXX Impulse Pro-Loc Black Wheels feature a ground breaking Bead-Loc design that allows users to change tires or foams when necessary without worrying about the tires coming out of the bead. Pro-Line’s proprietary Pro-Loc Technology brings this feature to life and creates an ultra-secure bond between Pro-Line’s Pro-Loc Tires and Pro-Line’s Impulse Pro-Loc Wheels. The reinforced Tire bead of Pro-Line’s Pro-Loc Tires fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. Features: Tires Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Reinforced Tire Bead Proprietary Pro-Loc Technology for Secure Tire Mounting Pairs perfectly with Pro-Line’s Impulse Pro-Loc wheels for X-MAXX® Foam Inserts Included Made in the USA, since 1982 Wheels Ground Breaking Pro-Loc Mounting Technology Change Tires or Foams and Re-use the Wheels Tough, Blacked-out Impulse Wheel styling Extra Thick, Extremely Durable to Take Serious X-MAXX® Abuse Stone Gray Bead-Loc Rings Stand Out from the Crowd Pairs perfectly with Pro-Line’s Badlands MX43 Pro-Loc Tires Made in the USA, since 1982

Read more less

Key Features Fits the front and rear 2WD and 4x4 Traxxas Slash Latest generation V2 SC wide carcass for increased contact patch Super aggressive motocross style tread for longevity and superior traction M2 (medium) compound Soft, reusable and waterproof closed cell foam inserts Removable hexes allow easy wheel offset changes, or upgrade to 14mm, 17mm and 12mm ProTrac Offset Hexes Fits any of Pro-Line's 6x30 Removable Wheel Hexes The two most common 12mm offset hexes are included Wheels constructed of high-strength DuPont nylon Overview Pro-Line is proud to introduce a next-generation Short Course wheel design – the Raid 2.2”/3.0” Removable Hex Wheel for all Short Course Tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! Now you can with the new 6x30 Removable Hex system from Pro-Line. The wheels include a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd Rear) hexes and a pair of 12mm Slash® 2wd Front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac™ offset 12mm hexes (6355-00) are available separately to fit your exact application. Wheel hexes can be easily replaced without needing to replace your glued tires (6354-00 Replacement Slash® Hexes)! Uses Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by six M3 screws that are spaced 30mm across. Needed to Complete Nothing What's in the box? (2) Pro-Line Badlands Tires (2) Raid 2.2"/3.0" Black 6x30mm Removable Hex SC Wheels (2) Closed Cell Inserts (2) 6x30 - 12mm Hex Adapters (Slash 4x4 F and R and Slash 2wd F) 2 pcs of each size (12) M3x12mm Socket Head Cap Screw Hardware

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Team Associated Rear Body, Wing & Fan Mount Set w/ Bumper – RC10B74.2 Complete Rear-End Hardware Refresh for B74.2 & B74.2D Restore factory fit and performance with this genuine replacement mount set from Team Associated. Designed for the RC10B74.2 and B74.2D platforms, this kit includes everything needed to secure the rear body, wing, and cooling fan—plus the rear bumper for extra protection. 🔩 Features: 🔧 Factory-spec replacement for easy installation 💨 Fan mount helps improve ESC cooling 🪶 Includes wing spacer and washers for secure aero setup 🛡️ Rear bumper adds protection without extra weight 📦 Includes: (1) Rear Body Mount (2) Wing Mounts (1) Wing Spacer (2) Wing Washers (1) Fan Mount (1) Rear Bumper ✅ Compatibility: Team Associated RC10B74.2  Team Associated RC10B74.2D

Read more less

Team Associated 23mm Carbon Fiber Front Shock Tower – RC10B74.1 Lightweight. Strong. Race-Ready. The RC10B74.1 23mm Carbon Fiber Front Shock Tower is a precision-cut replacement part designed specifically for Team Associated B74.1 and B74.1D 1/10 scale 4WD buggies. Crafted from high-quality carbon fiber, it offers strength without the weight—essential for competitive performance. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛡️ Durable and race-proven material 📏 23mm shock mounting geometry for consistent front-end handling 📦 Includes: (1) 23mm Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Upgrade your buggy’s performance with official Team Associated components.

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

  Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts (2pcs) Durability Meets Precision. Upgrade your suspension with Team Associated’s V2 3x27.5mm Ti-Nitride Shock Shafts, engineered for ultra-smooth performance and long-lasting wear resistance. These shafts feature a screw-mount piston design—perfect for racers who demand consistency and reliability lap after lap. Compatible with specific buggy and truck shock bodies, these are a direct fit for serious performance upgrades. 🔩 Features: ✨ Ti-Nitride Coated – Hard coating increases wear resistance and reduces friction 🔧 Screw-Mount Design – Stronger and more secure piston mounting (no E-clips) 🚗 Vehicle Compatibility: Fits ASC91577 Buggy Rear Shock Bodies Fits ASC91578 Truck Front Shock Bodies ⚠️ Note: Not compatible with E-clip style pistons 📦 Includes: (2) 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts Trust Team Associated components for reliable performance and race-ready precision.

Read more less

Spektrum 14.8V 5000mAh 4S 100C Smart LiPo Battery (IC5 Connector) Item No: SPMX50004S100H5 Smarter Power. Maximum Performance. The Spektrum Smart 4S 5000mAh 100C LiPo delivers high-output performance paired with industry-leading safety and ease-of-use. Built for serious RC surface applications, this pack supports up to 100C discharge, while Smart Technology allows automatic storage, advanced monitoring, and simplified charging. ⚙️ Features: ✅ 100C Continuous Discharge – Delivers extreme power for demanding RC vehicles 🧠 Smart Technology – Battery stores its own charge settings, cycles, voltage, and temperature history 🔋 Auto Storage Mode – Self-discharges to a safe voltage after 72 hours of inactivity 🔌 IC5 Connector – Compatible with older EC5-equipped devices 💡 No Setup Needed – Just plug into your Spektrum Smart Charger and press Start 📊 Integrated Microchip – Logs overheating, over-discharge, and cell data 📐 Specifications: Type: Smart LiPo Voltage: 14.8V (4S) Capacity: 5000mAh Discharge Rate: 100C Configuration: 4S1P Connector: IC5 (backward compatible with EC5) Wire Gauge: 12 AWG Weight: 1.09 lb (495g) Dimensions: 5.4 x 1.8 x 1.5 in (138 x 47 x 40mm) Application: Surface Charge Protection: Smart Charger Required ⚠️ Charging Note: This battery must be charged with a Spektrum Smart Charger. Using non-Smart chargers may result in damage or unsafe operation. 📦 Upgrade to smarter, safer LiPo performance — the Smart way.

Read more less

1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Traxxas Power Cell 6-Cell Stick NiMH Battery Pack w/ iD Connector (7.2V/3000mAh)📦 Part #: TRA2922X Power your Traxxas vehicle with confidence using the Traxxas Power Cell 6-Cell 3000mAh Stick NiMH Battery Pack. Designed for peak performance and long run times, this pack features the Traxxas iD connector for simple, safe, and foolproof charging every time. ⚙️ Features: 🔌 Traxxas iD High-Current Connector for maximum efficiency and compatibility with iD chargers 🔋 3000mAh Capacity delivers increased runtime and higher sustained voltage 🧵 12-Gauge MAXX Cable Wire with flexible silicone insulation for durability and heat resistance 🔩 Gold-Plated Copper Terminals minimize resistance and support high current loads ✅ Compatible with all Traxxas vehicles that use a 6-cell stick pack Pair this battery with a Traxxas EZ-Peak iD Charger for the safest and most user-friendly charging experience. Ideal for upgrading from stock packs or keeping a backup ready to go!

Read more less

  The Hobbywing QuicRun Fusion FOC 2300Kv 2-in-1 ESC & Motor System is a unique ground-up design, packed with technology specific for scale trucks and rock crawlers. Features: Integrated design of Hobbywing's patent technology: The integrated design of the ESC makes the size similar to a 540 motor, and the overall weight is only 209g. This makes the layout and wiring of the car simpler, while creating a cleaner overall chassis that also leaves more room for an interior.  Intelligent Torque Output & Speed Closed-loop Control for Easy Control: The Fusion system combined with Intelligent Torque output and closed-loop speed control means the power system will maintain the motor’s Torque level and RPM as the vehicle conditions change. Uphill, downhill, under load, the intelligent output torque makes the operation more consistent. Note: If the “RPM/Throttle Matching” is set to “Disabled”, no intelligent torque output & speed closed-loop control, just like the brushed system. FOC (Field-oriented Control) for Super Linearity & HighTorque & Extreme Mute: The Fusion system adopts FOC driving mode so low speed torque is strong, and it runs smoothly at very low speed. Moreover, the motor is extremely silent when it is running. The driving noise which annoys the driver disappears. It is the best choice for a scale rock crawler. Waterproof: Applicable to All Weather & Track Conditions: The IP-67 waterproof system has excellent waterproof and dustproof performance. You can easily drive in the mud, sand, ice, snow and water. High Driving Efficiency for Long Battery Life: FOC offers high efficiency and reduced heat, dramatically extending runtime. Benefitting from a sine wave driving mode, the motor runs silently and softly. Professional Drag Brake Adjustments & Super Parking Capacity: 8 levels of drag brake force and 9 settings of drag brake rate allow a high level of tuning for different conditions and driver preference. The maximum drag brake force is about twice that of an ordinary brushless system of the same size, providing super strong parking capacity on a steep slope. Advanced and Secure Electronic Switch: Compared to standard on/off switches, the dust, dirt, and waterproof electronic switch housing ensures a long reliable life for your power system, and will not suffer from the problems that will damage a mechanical switch.  Specifications: Motor Kv: 2300Kv Continuous Current: 60AShaft Diameter: 3.175mm Peak Current: 200A Input Voltage: 2-3S LiPo/6-9 Cell NiMH BEC Output: 6V/7.4V adjustable, 4A continuous (switch mode) Input Wires: 14awg, 330mm long Input Connectors: XT60 (factory installed) Port Programming: Independent programing interface (switch position) Size: 37x58mm Weight: 209g w/wires Includes: (1) FOC motor w/ built-in ESC & Factory installed XT60 plug

Read more less

  Spektrum S2200 G2 AC Dual Smart Charger Next-Level Charging. Made Easy. Take your charging game to the next level with the Spektrum™ S2200 G2 AC Smart Charger — designed for RC pilots and bashers who demand speed, safety, and simplicity. With up to 200W per channel (or 380W on a single channel), this 2-port charger makes battery management faster, smarter, and safer than ever. 🔋 Key Features: ✅ Dual Channel Power: Charge two packs at once — up to 200W per channel or 380W on one channel ✅ Auto Charge Technology: Automatically detects Smart battery parameters for effortless charging ✅ No Balance Leads Needed: Charges and balances Smart G2 batteries through a single IC3® or IC5® connection ✅ IC3® & IC5® Ports Included: No adapters needed for Smart batteries ✅ Real-Time Countdown Clock: Know exactly when your pack is ready ✅ Updated Interface: Large 2.8" screen with intuitive menus and navigation ✅ USB I/O Ports: Charge devices and update firmware ✅ Low-noise cooling fan & built-in ON/OFF switch ✅ Backwards compatible with EC3™ & EC5™ connectors 📦 Includes: (1) S2200 G2 AC Smart Charger (1) Detachable Power Cord (1) IC3® and IC5® Output Ports (selectable) ⚙️ Specifications: Input Voltage: 100–240V AC Max Charge Rate: 20A Supported Batteries:• 1–6S LiPo, LiIon, LiFe• 1–16 cell NiMH/NiCd• 1–12 cell Pb Discharge Rate: 0.1–1.5A Output Power: 2x200W or 1x380W Safety Features: Overcurrent, reverse polarity, thermal, short circuit, safety timer Connectivity: USB port, PC compatible Dimensions: 5.7" x 5.67" x 4.13" Weight: 37.7oz (1070g) 💡 Perfect for Smart G2 batteries — charge, balance, and go with just one connection.📈 Ideal for the bench, pit, or track.

Read more less

Pacer Technology Zip-Kicker Aerosol CA Accelerator – 5oz Instantly Speed Up CA Glue Curing The Pacer Zip-Kicker is a must-have for hobbyists and builders using cyanoacrylate (CA) glues. This accelerator dramatically reduces curing time, allowing you to continue working without delay. Ideal for bonding tough materials and quick repairs! 🧪 Features: ✅ Fast-Acting Formula – Instantly cures most CA adhesives ✅ Aerosol Spray Can – Easy, even application ✅ Cleaner Bonds – Helps reduce blooming and fogging ✅ Works on Tough Surfaces – Great for metal, plastic, rubber, and more 📦 Specifications: Application Type: Aerosol Can Size: 5 Ounce Viscosity: Medium Adhesive Type: Accelerator 🛠 Perfect for use in RC, modeling, crafts, and DIY projects. Just apply CA glue, spray Zip-Kicker, and let the bond set in seconds!  

Read more less

Team Associated Factory Team Molded Ring & Pinion Gear Set – RC10B74.2 Lightweight. Durable. Race Proven. Upgrade your drivetrain with the ASC92318 Factory Team Molded Ring and Pinion Gear Set, specifically engineered for the RC10B74.2 and B74.2D platforms. Made from a high-strength composite, this optional gear set delivers a significant 13.5g weight reduction while maintaining durability—even in modified power setups. Perfect for racers running a center differential in 13.5T class and beyond, this setup helps shave weight without sacrificing performance. 🔩 Features: ⚙️ Molded high-strength composite construction 🏁 Optimized for 13.5T class with center diff — holds up to mod setups 💨 Up to 13.5g weight savings for improved efficiency 🔧 Easy drop-in fit for B74.2 series vehicles 🧴 Gasket included – Grease sold separately 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear (1) Gasket ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 💡 Tip: Use Associated Silicone Grease (ASC6636 – sold separately) for optimal gear protection and smooth operation.

Read more less

This is a set of two Pro-Line Black MX38 Badlands HP Belted 3.8" Truck Tires, Pre-Mounted on Raid wheels. Pro-Line Badlands tires are known for having a noticeable Motocross inspired tread and the updated Badlands MX38 HP tires improves on this with and even Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose and loamy dirt, mud or grass. Pro-Line has used a refined processes to mold a High-Performance herringbone weave pattern Belt directly inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This design gives maximum control to put the power down even at high speeds. Quit wasting tires and lay down the power with a clear conscious. The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. In response to customer demand, Pro-line has designed an updated tire size to fit the current generation of Monster Trucks and the MX38 HP delivers at 3.48" wide and 6.8" tall. Features: Tire: Molded-in High-Performance Herringbone Weave Pattern Belt Aggressive Motocross Inspired Tread Design Badlands MX38 HP 3.8" tires Will Not Balloon or Expand During Use Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Belted Tires Give You Control to Put the Power Down Tire Size comes in at 3.48" wide and 6.8" tall Soft Foam Inserts Included Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.80" (173mm) Width: 3.48" (88mm) Includes: (2)  Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires on Raid wheels COMPATIBILITY: Arrma Kraton 6S BLXHPI Savage Flux HPHPI Savage XHPI Savage XLTekno RC MT410Traxxas RevoTraxxas SummitTraxxas T-Maxx

Read more less

  ARRMA Front & Rear Composite Upper Gearbox Covers / Shock Tower Set Durable Composite Replacement PartsUpgrade or replace your worn-out components with this ARRMA Front and Rear Upper Gearbox Cover and Shock Tower Set. Made from tough composite material, these parts offer reliable durability and precision fitment—keeping your ARRMA vehicle running strong on the track or trail. 🔧 Features: ✅ Tough composite material for long-lasting durability ✅ Precision-manufactured for consistent fit and easy servicing ✅ Integrated gearbox cover, shock tower, body post mount, upper inner suspension mount, and steering brace ✅ High-specification shock towers built for rough terrain 📦 Includes: (1) Front Gearbox Upper Cover (1) Rear Gearbox Upper Cover

Read more less

Traxxas "Series 1" 6-Cell NiMH Pack w/ Molex Connector (7.2V/1800mAh)📦 Part #: TRA2925 Power up your Traxxas EZ-Start system with confidence using the Traxxas Series 1 6-Cell NiMH Battery Pack. Designed for reliable, all-day starting performance, this compact 7.2V pack is the ideal choice for consistent ignition and durability. ⚙️ Features: 🔌 Standard Molex Connector for plug-and-play compatibility with the EZ-Start system 🔋 Rugged NiMH Cells deliver dependable performance and long cycle life 🔧 14-Gauge Silicone-Jacketed Wires for superior flexibility and protection 💥 Welded Tabs ensure a solid internal connection for optimal current flow 🔁 Optimized for EZ-Start units — reliable, fast engine starts with a single charge This battery pack is a must-have for Traxxas nitro users looking for simplicity, durability, and affordable performance in their EZ-Start system.

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

  Spektrum 2S 300mAh 30C LiPo Battery w/PH Connector Perfect Power for UMX Aircraft! The Spektrum 2S 300mAh LiPo Battery is the ideal match for E-flite UMX airplanes that require a 2S LiPo setup. With a lightweight design, high discharge rate, and a PH connector, this battery delivers consistent performance and flight time in a compact package. ⚙️ Features: ✅ Designed for E-flite UMX Airplanes 🔌 PH Connector for plug-and-play compatibility ⚡ 30C Discharge Rate provides up to 9 amps of continuous current 🔋 Compact and Lightweight for efficient power-to-weight ratio ⏱️ Supports Charging Up to 0.9A (3C) 📐 Specifications: Voltage: 7.4V (2S) Capacity: 300mAh Max Discharge: 30C (9 Amps) Max Charge Rate: 0.9A (3C) Connector: PH Length: 1.65" (42mm) Width: 0.74" (19mm) Height: 0.47" (12mm) Weight: 17g Discharge Lead Length: 2" (51mm) ⚠️ Note: Always use a compatible charger and follow LiPo safety guidelines. 📦 Great for UMX planes and small 2S electric aircraft.

Read more less

🔩 Arrma Granite Grom Front Suspension Arm Set "A" 🔩💥 Durable Replacement Suspension Arms for Granite & Typhon Grom 💥 Keep your Arrma Grom running strong with the Granite Grom Front Suspension Arm Set "A"! Whether you're hitting jumps, bashing through rough terrain, or just cruising, these tough suspension arms are designed to handle it all. Perfect for replacing worn or broken parts, this set ensures your RC stays race-ready and trail-tough. 💪🏆 Compatible with both the Granite Grom and Typhon Grom, installation is a breeze—so you can spend less time in the workshop and more time tearing it up! 🚗💨 ✅ Key Features: ✨ Direct replacement for stock components🛠️ Precision-molded for strength & durability🚙 Compatible with Arrma Granite Grom & Typhon Grom⚡ Easy installation for quick repairs💯 Includes both upper & lower front arms 📦 Includes: ✔️ (2) Front Upper Arms✔️ (2) Front Lower Arms 🔗 Compatibility: 🔸 Arrma Granite Grom🔸 Arrma Typhon Grom

Read more less

Team Exalt BL108 High Torque Brushless Servo (High Voltage / Metal Case)📦 Part #: EXAHB108 The Exalt HB108 is a high-performance servo designed for racers who demand power, speed, and durability. Perfect for 1/8 and 1/10 off-road applications, it features a brushless motor, aluminum case, and steel machined gears—making it a workhorse ready for harsh racing conditions. ⚙️ Features: 💪 High Torque Output: Up to 486oz-in @ 8.4V ⚡ Fast Response: As quick as 0.075sec/60° 🔋 High Voltage Capable: 4.8V to 8.4V operation 🛡️ Waterproof Design for all-weather confidence 🧊 All-Aluminum Case improves heat dissipation 🔩 CNC-Machined Steel Gears for max strength and durability 🔧 Smooth & Responsive Feel for high-precision control 📊 Performance Specs: Voltage Speed (sec/60°) Torque (oz-in / kg-cm) 6.0V 0.097 389 / 28 7.4V 0.086 431 / 31 8.4V 0.075 486 / 34.9 Motor: Brushless Operating Voltage: 4.8V–8.4V Temperature Range: -15°C to +70°C Spline: 25T Dimensions: 40x20x37.5mm (1.57x0.78x1.47in) Weight: 83g (2.92oz) 📦 Includes: (1) Exalt HB108 High Torque Brushless Servo (1) Set of Composite Servo Horns Mounting Hardware 🔥 Built to dominate. The BL108 delivers the strength and precision you need to stay in control—race after race.

Read more less

Team Associated Factory Team Carbon Front Gearboxes – RC10B74.2 Tunable Front-End Performance for Changing Track Conditions Unlock precise handling with the Factory Team Carbon Front Gearboxes for the RC10B74.2 and RC10B74.2D. This lightweight carbon-reinforced gearbox set offers both standard and +2mm ride height options, giving racers ultimate flexibility in front-end tuning for varying surfaces and setups. 🔩 Features: 🧱 Lightweight carbon composite material 📏 Includes both standard and +2mm height gearboxes 🔧 Covers included for both gearbox housings 🌀 Comes with sway bar bracket for fine handling adjustments 📦 Includes: (1) Standard Height Front Gearbox w/ Cover (1) +2mm Front Gearbox w/ Cover (1) Sway Bar Bracket ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🎯 Optimize your front-end geometry for maximum track performance.

Read more less

Arrma 8S-BLX 182mm CVD Driveshaft – Kraton/Outcast 8S Heavy-Duty Replacement for Extreme 8S Power The Arrma 182mm CVD Driveshaft is a precision-engineered replacement part designed specifically for the Kraton and Outcast 8S BLX platforms. Built to handle the brutal torque and terrain-bashing performance of 8S brushless systems, this heavy-duty driveshaft delivers smooth power transfer and lasting durability. 🛠️ Features: 🧱 Tough Steel Construction – Built to endure extreme bashing conditions 🔄 Precision Dogbone Pins – Ensure consistent, smooth drivetrain operation ⚙️ CVD Coupling Design – Reduces maintenance while delivering ultra-smooth power delivery ✅ Compatibility: Arrma Kraton 8S BLX Arrma Outcast 8S BLX 💥 Ideal for racers and bashers who demand reliability under high-stress, high-speed conditions.

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

This is an optional set of RPM 4S Kraton and Outcast Front Suspension Arms, intended for use with ARRMA Kraton and Outcast kits and designed for strength and durability with features to better enhance performance. These A-arms deliver excellent slop elimination by reducing the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. The addition of a second shock mount hole further out on the arm provides a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst. These arms are almost 25% thicker and able to take much more damage than stock. Features: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replaces stock #AR330521

Read more less