🔩 BOOF RC 48P Aluminum Pinion Gear (16T–40T) This is a BOOF RC 48 Pitch Lightweight Aluminum Pinion Gear — precision-engineered for off-road applications where quicker motor spool-up and acceleration make all the difference. CNC-machined from aluminum and hard anodized for strength, these gears are built to deliver smooth, consistent power. Gears 16T and larger feature weight-reducing cuts on the back side, maximizing performance without compromising durability. Each gear includes a setscrew for easy installation. 💡 Choose your tooth count from the menu above. ✅ Features: 48 Pitch, perfect for a wide range of off-road vehicles Available in 16T to 40T sizes Lightweight, hard-anodized aluminum construction Machined for precision and durability Reduced rotating mass = faster acceleration Includes setscrew BOOF RC sticker included

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Traxxas 48P Spur Gear (86T)Part #: 4686 Fine-tune your gearing with this optional 48-pitch, 86-tooth spur gear from Traxxas. Whether you're looking to optimize for more torque or higher top-end speed, this precision-molded gear delivers consistent performance and smooth power delivery. Features: Optional 48-pitch 86-tooth spur gear Ideal for adjusting gear ratios for better torque or speed Durable molded construction Genuine Traxxas quality and reliability Includes: (1) 86T 48P Spur Gear Note: Be sure to verify pitch compatibility with your pinion gear before installing.

Read more less

Traxxas 90T Spur Gear – 48 Pitch – Part 4690Optional Gearing. Maximum Torque. Smooth Power Delivery. The Traxxas 90-Tooth Spur Gear (Part 4690) is a high-tooth-count option for drivers looking to increase low-end torque and improve throttle control. Designed for 1/10 scale Traxxas vehicles using 48-pitch gears, this spur is perfect for tight tracks, crawling setups, or slower-speed applications where control matters most. ✅ Tooth Count: 90T – increases torque and low-end response✅ Pitch: 48P – fine-pitch for smooth and quiet operation✅ Optional upgrade for fine-tuning gear ratio✅ Durable molded construction – built to handle real-world use✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 90-Tooth 48P Spur Gear Part #: 4690  

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Traxxas 48P Spur Gear (76T)Part #: 4676 This 76-tooth, 48-pitch spur gear is a direct replacement from Traxxas, ideal for dialing in your gearing for optimal performance. Whether you're fine-tuning for acceleration or speed, this gear provides smooth, reliable power transfer. Features: Genuine Traxxas replacement part 48-pitch, 76-tooth gear Perfect for customizing gear ratios Durable molded construction Includes: (1) 76T 48P Spur Gear Note: Ensure pitch compatibility with your pinion gear before installation.  

Read more less

Traxxas Plastic Servo Gear Set – 2070/2075 Part #: 2072A Restore your Traxxas 2070 or 2075 servo with this factory replacement plastic gear set. Perfect for quick fixes and keeping your steering or throttle responsive and reliable. ✅ Features: Direct replacement for Traxxas 2070 & 2075 servos Includes precision plastic gears and two bearings Quick and easy installation 🛠️ Also Consider: 💡 Looking for long-term durability?Upgrade to the Traxxas Metal Gear Set (TRA2072R) for added strength and performance under high-stress conditions. 📦 Includes: (1) Complete Set of Plastic Gears (2) Servo Bearings For use with: Traxxas 2070 & 2075 servos 🔧 Keep a spare set in your pit box – fast, easy repair when you need it most!

Read more less

Upgrade your drivetrain with the durability and precision of the Traxxas Hardened Steel Mod 1.0 Pinion Gear. Designed for high-power setups, this 20-tooth gear features a 5mm bore and Mod 1 tooth pitch, making it perfect for brushless applications and heavy-duty RC builds. 🔩 Includes: (1) Hardened Steel 20T Pinion Gear (Mod 1.0, 5mm bore) (1) Set Screw ✅ Features: Made from tough hardened steel for long-lasting performance Mod 1.0 pitch for compatibility with high-torque drivetrains Fits motors with 5mm output shafts Ideal for 1/8 scale vehicles and high-power brushless setups Whether you're bashing or racing, this pinion gear delivers strength and reliability when it counts.

Read more less

  Traxxas Planetary Differential Gears & Shafts – Part 2382Restore the Heart of Your Diff. Keep your drivetrain smooth and reliable with this replacement set of internal differential gears and shafts from Traxxas. Whether you're rebuilding a worn diff or stocking up for maintenance, Part 2382 gives you everything you need inside the case. ✅ Direct-fit OEM replacement – fits standard Traxxas planetary differentials✅ Includes planet gears + internal shafts – complete internal gear set✅ Smooth power transfer – maintains tight handling and acceleration✅ Great for rebuilds or spares – essential for long-term performance 📦 Includes: (4) Planet Gears (2) Internal Gear Shafts Part #: 2382 🔧 Pro Tip: Pair with fresh diff grease and new output gears for a complete differential refresh.

Read more less

Team Associated RC10B7 Gear Differential Set – Reliable Power Transfer for the Track! ⚙️ Keep your buggy’s drivetrain running smooth and efficient with the Team Associated RC10B7 Gear Differential Set!Designed as a direct replacement for the RC10B7 and RC10B7D, this factory gear diff delivers durability, consistent performance, and easy maintenance — essential for serious racers. ✨ Key Features: ⚙️ Complete Factory Replacement Gear Differential – Designed specifically for peak performance with the RC10B7 and B7D 🛠️ Durable Construction – Built to withstand the demands of 1/10 off-road racing 🏁 Smooth and Reliable Power Delivery – Maintains consistent handling and traction under race conditions 🔧 Easy to Service – Designed for fast rebuilding and tuning between heats 📦 Includes: ✔ (1) Complete RC10B7 Gear Differential Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Differential fluid is not included and must be purchased separately.🔹 Check your manual for recommended fluid weight based on track conditions. 🏁 Maintain your competitive edge with a fresh RC10B7 Gear Differential Set! 🔥 Upgrade today and ensure maximum performance and reliability from your Team Associated buggy! 🔥

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Traxxas Front Differential Ring & Pinion Gear Set (47T/12T) – Part #10778🔧 Smooth Power. Front-End Strength. Keep your front drivetrain running strong with this genuine Traxxas 47-tooth ring and 12-tooth pinion gear set. Designed specifically for the front differential, these gears ensure reliable power transfer and smooth performance—whether you're bashing, crawling, or racing. ✅ 47T ring gear / 12T pinion gear✅ For front planetary differentials✅ Precision-cut for smooth mesh and durability✅ OEM replacement for easy maintenance 📦 Includes: (1) 47-Tooth Differential Ring Gear (1) 12-Tooth Differential Pinion Gear  

Read more less

Traxxas X-Maxx Metal Gear Set – 2085 / 2085X Servos Part #: 2087X Upgrade or repair your Traxxas 2085 or 2085X servo with this heavy-duty metal gear set. Built to withstand the extreme torque and punishment dished out by the X-Maxx and other high-powered vehicles. ✅ Features: Precision hardened metal gears Designed for Traxxas 2085 and 2085X waterproof servos Increases durability and longevity over stock plastic gears Ideal for heavy-duty bashing and racing 📦 Includes: (1) Complete Metal Gear Set (1) Bearing Set Compatible with: Traxxas 2085 Servo Traxxas 2085X High-Torque Servo 🛡️ Keep your steering strong and reliable — even under max load. Perfect for serious X-Maxx owners and hard-core bashers!

Read more less

🌀 Stronger. Smoother. Smarter. Upgrade your Mini Maxx’s drivetrain with the Hot Racing Steel Helical Rear Ring & Pinion Gear Set. Precision-machined from high-carbon steel, this 39T/10T gear combo delivers smoother operation, quieter performance, and higher torque-handling than stock. The helical cut design distributes load more evenly—perfect for high-power setups and serious bashers. ✅ Helical spiral-cut = quieter + smoother power delivery✅ High-carbon steel for extreme durability✅ Handles more torque with fewer teeth✅ Drop-in upgrade for the Traxxas Mini Maxx (rear) 📦 Includes:• (1) 39T Steel Helical Rear Ring Gear• (1) 10T Steel Helical Rear Pinion Gear Tame the torque. Quiet the chaos. Dominate the trail.

Read more less

Upgrade your drivetrain with precision and strength. The Traxxas 20T Machined Mod 1.0 Pinion Gear is built for serious performance, featuring a 5mm bore and high-quality machined steel construction. Designed for the Traxxas E-Revo 2.0 and Maxx, this gear is ideal for high-torque brushless setups when paired with a steel spur gear. Features:• 20-tooth Mod 1.0 pitch• 5mm bore fits 1/8-scale motor shafts• Precision-machined steel construction• For use with steel spur gears only• Perfect for E-Revo 2.0 and Maxx Includes:• (1) 20T Machined Steel Pinion GearPart Number: 6494R

Read more less

Upgrade your drivetrain with Traxxas 32P Heavy Duty Pinion Gears, built tough from hardened steel for maximum durability and long-lasting performance. Available in a range of tooth counts from 12T to 22T, these 32-pitch pinions are perfect for high-power setups and intense off-road action. 🔩 Precision-machined hardened steel🔩 Perfect for brushless power systems🔩 Includes set screw for secure installation🔩 Available sizes: 12T through 22T🔩 Fits 3mm motor shafts Includes: (1) Steel Pinion Gear (Choose Tooth Count) (1) Set Screw Part Numbers: 3942X–3952X (select by tooth count) Built for strength. Made for speed. Trusted by Traxxas.

Read more less

Traxxas 25-Tooth Pinion Gear (32-Pitch, 3mm Bore) – Part #10842⚙️ Dial In Your Speed. Smooth, Efficient Power Delivery. Upgrade or fine-tune your drivetrain with this Traxxas 25T pinion gear. Built for 3mm motor shafts and compatible with 32-pitch setups, it delivers solid acceleration and balanced top-end speed. Perfect for dialing in gearing to match your terrain or driving style. ✅ 25-tooth pinion✅ 32-pitch gear profile✅ Fits 3mm motor shafts✅ Hardened for long-lasting performance✅ Includes set screw for secure installation 📦 Includes: (1) 25T Pinion Gear (32P, 3mm bore) (1) Set Screw  

Read more less

Traxxas TRX-4M Two-Speed Transmission Gears – Part #9876⚙️ Shift Your Adventure into High Gear. Upgrade your TRX-4M with selectable speed and torque! These Two-Speed Transmission Gears are designed for use with the optional #9891 transmission and allow you to switch between a low-speed crawl gear and a faster second gear. Perfect for those looking to add versatility and more scale realism to their 1/18 trail truck. ✅ Designed for the optional TRX-4M #9891 transmission✅ Adds selectable low and high gear functionality✅ Ideal for mixed terrain and trail versatility✅ Genuine Traxxas quality for smooth, reliable performance 📦 Includes: Two-Speed Transmission Gear Set (for use with #9891 transmission)  

Read more less

Traxxas 48P Pinion Gear (28T) – Part #4728⚙️ Precision Gearing. Balanced Performance. Dial in your drivetrain with the Traxxas 28-tooth 48-pitch pinion gear. Perfect for fine-tuning your RC’s performance, this hardened steel gear delivers smooth acceleration and balanced top-end speed when paired with an 83T spur gear. Whether you're racing or bashing, proper gearing can mean the difference between finishing strong or falling short. ✅ 48-pitch, 28-tooth steel pinion✅ Ideal for increasing speed while maintaining efficiency✅ Compatible with standard 3mm motor shafts✅ Perfect match with 83T spur gear for optimized gearing✅ Set screw included for secure installation 📦 Includes: (1) 28T 48P Pinion Gear (1) Set Screw 💡 Pro Tip: Want more torque and acceleration? Go with a smaller pinion. Want more top speed? Gear up with a larger pinion—just like this one!  

Read more less

Traxxas Metal Gear Set for 2065R Servo – Part 2064RRestore Precision. Reinforce Performance. The Traxxas 2064R Metal Gear Set is a direct replacement for the 2065R waterproof sub-micro servo. Whether you’ve stripped a gear or want to upgrade before failure, this set provides the toughness and precision your servo needs to perform under pressure. ✅ Fits Traxxas 2065R waterproof sub-micro servo✅ Hardened metal construction – durable and wear-resistant✅ Exact OEM replacements – restores like-new performance✅ Ideal for high-stress applications and harsh conditions✅ Great spare to keep in your toolbox 📦 Includes: (1) Complete Metal Gear Set for 2065R Servo Part #: 2064R 💡 Pro Tip: Replacing worn servo gears early helps prevent servo failure and protects your steering or shifting systems.

Read more less

Traxxas VXL Planetary Gear Differential – Part 2382Built Strong. Tuned for VXL Power. The Traxxas VXL Planetary Gear Differential is designed to handle the high output of brushless power systems. Featuring a steel ring gear for added strength, this complete kit is perfect for replacing or upgrading your existing diff on VXL-equipped vehicles. ✅ Heavy-duty steel ring gear – improved durability under brushless torque✅ Complete differential kit – all internal gears, shafts, and housing included✅ Smooth, consistent power delivery – ideal for high-speed bashing or racing✅ Designed for VXL models – fits most Traxxas 2WD platforms 📦 Includes Everything to Build One Differential: Differential housing Steel ring gear Planet gears & internal shafts Cross pins, output gears, & assembly hardware 🔩 Part #: 238 💡 Pro Tip: Use with high-quality diff grease for smoother operation and longer gear life.

Read more less

Team Associated RC10B7 Hinge Pin Set Part Number: ASC92496 Keep your suspension smooth and secure with the Team Associated RC10B7 Hinge Pin Set. This replacement set includes all necessary hinge pins for the RC10B7 platform, ensuring your vehicle maintains proper alignment and performance during high-stress racing conditions. ✅ Features: Direct replacement for the Team Associated RC10B7 Precision machined for smooth suspension operation Includes full set of hinge pins for the front and rear Durable construction for long-lasting performance 📦 Includes: (1) Complete hinge pin set for RC10B7 🚗 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

🛠️ Traxxas Steel Wide-Face Mod 1.0 Spur Gear (46T / 50T / 54T) — Heavy-Duty Performance! Upgrade your drivetrain with Traxxas Steel Wide-Face Spur Gears, available in 46T, 50T, or 54T tooth options. Designed for maximum durability and load handling, these heavy-duty steel gears are perfect for high-torque setups, big power, and extreme bashing. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔩 Why Choose Steel? ✅ Wider face for increased tooth engagement ✅ Hardened steel construction for ultimate durability ✅ Perfect for high power brushless systems and intense terrain 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Best for short, technical tracks or heavy loads Smaller Spur (Lower T) 🔹 Smoother, slower take-off 🔹 More top speed 🔹 Ideal for open tracks and speed runs ✅ Compatible With: Traxxas Maxx Traxxas X-Maxx Traxxas XRT 📦 Includes: (1) Traxxas Steel Wide-Face Spur Gear in your selected size (46T, 50T, or 54T) 🌀 Need extreme strength and tuning flexibility? Steel is the way to go. Gear up your Maxx, X-Maxx, or XRT for whatever the track throws your way!

Read more less

Traxxas Mod 1.0 Spur Gear (46T / 50T / 54T) — Fine Tune Your Gearing! Dial in the performance of your Traxxas vehicle with precision using Mod 1.0 Spur Gears! Available in 46T, 50T, or 54T, these gears let you adjust acceleration, torque, and top speed to perfectly match your terrain or driving style. Whether you're racing for top speed or need explosive off-the-line acceleration, there's a gear for that. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Great for small tracks & tight turns 🔹 Combine with larger pinion for torque Smaller Spur (Lower T) 🔹 Smoother acceleration 🔹 Higher top speed 🔹 Ideal for wide-open tracks ✅ Compatible With: Traxxas XO-1 Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx 📦 Includes: (1) Traxxas Mod 1.0 Spur Gear in your selected tooth count (46T, 50T, or 54T) 🌀 Fine tune your setup for every terrain — whether you're chasing laps or launching jumps, pick the spur that puts you in the lead!

Read more less

UpGrade RC "Black Lightning" Rubber Sealed Bearing Kit for Traxxas® TRX-4M™📦 Part #: UPG-17014💥 Boost performance. Seal out the grime. Upgrade your TRX-4M with the UpGrade RC “Black Lightning” Bearing Kit—built to handle the roughest terrain and keep your rig rolling smoothly. Featuring rubber-sealed bearings, this kit offers enhanced protection from dirt, dust, and moisture, meaning less maintenance, more drive time, and longer-lasting performance. 🛠️ Key Features: ✅ Rubber Seals: Keep out water, grime, and contaminants ✅ Smooth & Quiet Operation: Reduced friction for better performance ✅ High Durability: Less wear = longer life ✅ Corrosion Resistant: Run hard in any environment ✅ Precision Fit: Designed specifically for TRX-4M platforms 🔧 Includes (22 Bearings Total): (2) 8x12x3.5mm (4) 5x8x2.5mm (4) 4x8x3mm (4) 3.5x7x2.5mm (8) 3x6x2.5mm 💡 Note: Always verify your model’s bearing sizes in your manual, especially if you’ve installed hop-ups or own a different production version. 🚀 Built for performance. Sealed for protection.The Black Lightning series delivers the smooth power transfer and reliability you need—on the rocks or off the grid.  

Read more less

Perfect for High-Power Drag Racing Builds📦 Part #: Choose 20T–40T Take your drag racing setup to the next level with the ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear. These pinions are specifically engineered for high-RPM 4-pole motors with 5.0mm shafts, making them ideal for no-prep and straight-line drag applications. Precision-cut for smooth 48 pitch mesh, they're built to deliver maximum efficiency and faster acceleration by reducing rotational mass. 🔧 Key Features: Pitch: 48P (Perfect for drag and speed builds) Bore Size: 5.0mm – fits large shaft 4-pole motors Material: Lightweight aluminum for reduced rotating mass Finish: Hard anodized for durability under high stress Etched Tooth Count: Easy size identification Performance: Quick spool-up, consistent gear mesh, and reliable grip under load 🏁 Why It Matters: Less mass = faster response. Whether you're trying to shave tenths off your ET or just want smoother power delivery, these ProTek pinions give your build the edge where it counts. 👉 Choose from 20T to 40T to dial in your exact gearing needs! Note: Compatible with 48 pitch spur gears and motors that use 5mm output shafts. Always double-check mesh and gear clearance during install.

Read more less

Replacement Gears for Portal-Equipped Rigs Keep your TRX-4M or TRX-4MT running smooth with this genuine Rear Portal Drive Gear Set. Designed specifically for use with the optional portal axles (#9843R), this set includes all three replacement gears needed to restore performance and durability in the rear axle. Features:• Replacement gear set for rear portal axles• Compatible with TRX-4M and TRX-4MT models• Designed for use with optional portal axles (#9843R)• High-strength metal construction Includes:• (3) Rear Portal Drive GearsPart Number: 9878 Stay geared up and trail-ready with tough, reliable Traxxas components.  

Read more less

  Restore smooth power delivery to your TRX-4’s front axle with this genuine Traxxas Portal Drive Input Gear set. This kit includes the front portal input gear, drive pin, and cross pin—everything you need for a quick and reliable repair. Features:• Replacement front portal drive input gear• Includes drive pin and cross pin• Precision-engineered for TRX-4 portal axle systems• Durable steel construction for trail-tough performance Includes:• (1) Front Portal Drive Input Gear• (1) Drive Pin• (1) Cross PinPart Number: 8257 Genuine Traxxas parts for dependable fit, function, and durability on the toughest trails.

Read more less

Keep your Slash 4X4 running smooth and strong with this Traxxas 52T Spur Gear. Featuring a 0.8 Mod pitch (equivalent to 32 pitch), this durable gear is a direct replacement for your stock setup and delivers reliable power transfer for high-performance driving. Features:• 52-tooth spur gear• 0.8 Mod / 32 pitch• Durable molded construction• Fits Slash 4X4 and compatible models Includes:• (1) 52T Spur GearPart Number: 6843 Perfect for maintaining smooth acceleration and efficient gearing on your Slash 4X4.  

Read more less

Built for durability and precision, the Traxxas 23T Steel Mod 1.0 Pinion Gear is a tough upgrade for high-power setups. Featuring a 5mm bore and Mod 1.0 tooth pitch, it’s perfect for brushless conversions or high-performance builds requiring extra strength. Includes the pinion gear and set screw—ready to bolt on and rip. Features:• 23-tooth Mod 1.0 pitch• 5mm bore fits standard 1/8-scale motor shafts• Hardened steel construction• Includes set screw for secure installation Includes:• (1) 23T Steel Pinion Gear• (1) Set ScrewPart Number: 6481X

Read more less

Dial in your gear ratio with this precision-cut 23-tooth 32-pitch pinion gear from Traxxas. Designed for motors with a 3mm shaft, this gear delivers smooth, efficient power transfer for high-performance setups. 🔧 Features: 23T pinion gear with 32-pitch tooth profile Precision-machined steel for strength and durability 3mm bore – fits standard 3mm motor shafts Includes set screw for secure mounting Perfect for:Upgrading or tuning your gear ratio for more top-end speed or specific track conditions. Includes: (1) 23T 32-pitch pinion gear (1) Set screw Whether you’re fine-tuning for speed or replacing a worn gear, this Traxxas pinion is built to perform.  

Read more less

Traxxas 34-Tooth Pinion Gear (1.0 Mod, 5mm Bore) – Part #6493⚙️ Max Out Top Speed. Built for Brutal Brushless Power. The Traxxas 34T Pinion Gear is precision machined for smooth performance and maximum efficiency. With a 1.0 metric pitch and 5mm bore, it’s made to fit high-powered brushless setups and withstand serious speed and torque. Perfect for high-speed runs and gear ratio tuning. ✅ 34-tooth gear for higher top-end speed✅ 1.0 Mod pitch for strength and durability✅ Fits 5mm motor shafts (ideal for brushless systems)✅ Machined steel for long-lasting wear resistance✅ Includes set screw 📦 Includes: (1) 34T Pinion Gear (1.0 Mod, 5mm bore) (1) Set Screw

Read more less

Traxxas 17-Tooth Pinion Gear (32-Pitch, 5mm Bore) – Part #5643⚙️ Tuned for Torque. Built for Power. The Traxxas 17T pinion gear is a great choice for tighter tracks or when you need more punch off the line. Designed with a 5mm bore to fit brushless motors with larger shafts, it delivers reliable torque with 32-pitch gearing. Ideal for high-performance builds that demand durability. ✅ 17-tooth gear for quick acceleration✅ 32-pitch / 0.8 metric pitch compatible✅ Fits 5mm motor shafts✅ Hardened steel construction✅ Includes set screw for secure fit 📦 Includes: (1) 17T Pinion Gear (32P, 5mm bore) (1) Set Screw

Read more less

Traxxas 32P Hardened Steel Pinion Gear (31T, 5mm Bore) – Part #5638⚙️ Stronger. Smoother. Built for Brushless. The Traxxas 31-Tooth Pinion Gear is built for performance and durability. Compatible with 32-pitch setups (0.8 metric pitch), this pinion is precision-cut from hardened steel and designed to fit motors with a 5mm shaft. Perfect for high-power RC builds demanding reliable gearing under pressure. ✅ 32-pitch / 0.8 mod compatibility✅ Hardened steel construction✅ 5mm bore for brushless motor shafts✅ Ideal for Slash 4X4, E-Revo, and other high-output platforms 📦 Includes: (1) 31T Hardened Steel Pinion Gear (1) Set screw  

Read more less

Traxxas 32P Hardened Steel Pinion Gear (34T, 5mm Bore) – Part #5639⚙️ Built to Handle Brutal Power. The Traxxas 34T Hardened Steel Pinion Gear is designed for serious torque and high-performance applications. Made from tough hardened steel, this 32-pitch gear is perfect for 1/8 and high-power 1/10 scale builds using motors with 5mm shafts. When you need dependable gearing that can take the heat—this is the upgrade. ✅ 32 pitch for high-power drivetrain setups✅ Hardened steel for extreme durability✅ 5mm bore fits most 1/8 brushless motors✅ Ideal for Slash 4X4, E-Revo, and more with 5mm shafts 📦 Includes: (1) 34T Hardened Steel Pinion Gear (1) Set screw

Read more less