1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

JConcepts Mono 2.2" Rear Wheels (4) – White – Fits B7, B74.2, YZ2, YZ4, XB2, XB4, LD3, L1R Overview:The JConcepts Mono 2.2" Rear Wheels are a proven favorite in 1/10 off-road racing, known for their durability, performance, and fitment across a wide range of modern race buggies. These wheels feature a concave dish design, outer glue bead catch, and precision-molded 12mm hex to ensure proper fitment and performance on high-traction tracks. Built with durability and weight savings in mind, the Mono wheel includes tall radial outer ribs, short inner beads, and 10 internal supporting ribs for a balanced combination of strength and low rotating mass. Packaged as a set of 4 wheels, they offer excellent value for racers who go through multiple sets during testing or events. Features: Durable Mono-style design with concave face Includes 4 wheels per pack Outer glue bead catch for clean tire installs Tall outer radial ribs and shorter inner bead ribs for weight savings 10 internal support ribs for stability Two vent holes per wheel Molded in bright white or fluorescent yellow ROAR National & IFMAR World Championship approved Compatibility: ✅ Team Associated B7 / B74.2✅ Yokomo YZ2 / YZ4✅ Xray XB2 / XB4✅ Schumacher LD3 / L1R

Read more less

JConcepts Mono 2.2" "Slim" Front Wheels (Yellow, 4pcs) – 12mm Hex Overview:The JConcepts Mono 2.2" Slim Front Wheels are precision-designed for narrow front tires commonly used in carpet and Astroturf racing. Molded from durable high-impact material, these lightweight wheels offer a clean dish-style design with functional features that racers demand. The shallow 12mm hex design ensures quick, clean installs across a wide variety of 2WD buggy platforms. Whether you're mounting up on a Team Associated B6, Yokomo YZ-2, or Kyosho RB6, these wheels offer an ideal fit for tight indoor racing conditions. Each pack includes four wheels, available in fluorescent yellow for high visibility and style. Features: Slim width for narrow tire applications (carpet/Astro) Lightweight, one-piece construction Popular dish styling with vent holes Outer glue catch for cleaner tire mounting Polished face with embossed JC logo Pack of 4 wheels Available in bright white or fluorescent yellow Compatibility Includes (but not limited to): ✅ Team Associated: B7, B7D, B6, B6.1, B6.1D, B6.2, B6.2D, B5, B5M, B4 series✅ Kyosho: RB5, RB6, RB7✅ Schumacher: Cougar KF2, KF2 SE, KD, KC, LD3✅ Yokomo: YZ-2 CAL, CAL2, CAL3, DTM, DTM WC, DTM2, DTM3✅ Serpent: SRX-2 MM, RM✅ XRAY: XB2 (2017–2019 Carpet/Dirt editions)

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Team Associated RC10B6 Factory Team Carbon Front Suspension "Gullwing" Arms [91872] 🦅 Fly through corners with precision! Upgrade your front end with Factory Team Carbon Gullwing Arms for your RC10B6! Designed with carbon fiber construction, these arms are lighter, stiffer, and stronger—giving you the edge when the track gets tough and traction is high. ✅ 12% lighter than "hard" material✅ Better cornering in high-grip conditions✅ More consistent handling and stability✅ Extreme strength and durability Includes:(2) Carbon Front Suspension Gullwing Arms 📦 Part Number: 91872🏁 Brand: Team Associated

Read more less

  Engineered for high-grip carpet and turf tracks, the JConcepts Fuzz Bite LP rear tires bring next-level precision and traction. With a low-profile carcass and reverse "water tower" pin design, these tires offer lightning-quick transitions and maximum grip without sacrificing longevity. Radius-positioned pins and directional lugging create consistent cornering and explosive forward bite. 💥 Open cell inserts included. Features:• Low-profile carcass for reduced sidewall roll• Reverse "water tower" pin shape for precision grip• Radius-positioned pin layout for optimized bite• Lightweight scalloped tire beads reduce rotational mass• Plush open cell inserts included

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

  Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

Team Associated RC10B6.4 13mm Shock Rod End Set [91997] 🔧 Small Part. Big Performance. 💥 Keep your suspension dialed with the 13mm Shock Rod End Set for the RC10B6.4. Whether you're replacing worn parts or fine-tuning your ride, these rod ends are built to factory spec and ready to race. ✅ Designed for 13mm shocks✅ Precision fit for smooth performance✅ Durable molded construction✅ Perfect for rebuilds or spares Includes:(1) 13mm Shock Rod End Set 📦 Part Number: 91997🔧 Brand: Team Associated🏁 Fits: RC10B6.4 & B6.4D platforms

Read more less

Unleash race-winning control and consistency with the JConcepts 3DP 2.2" Pre-Mounted Carpet Tires — engineered for elite racers demanding precision and long-lasting performance on high-grip carpet tracks. Designed and tested in the USA, the 3DP tire represents the latest generation of JConcepts’ carpet racing technology, building on the success of the Fuzz Bite and 3D series. The super-stacked pin layout with reverse “water tower” pins delivers incredible forward bite and consistent wear, while the low-profile carcass keeps steering crisp and the buggy planted through corners. Mounted on lightweight JConcepts Mono wheels, these tires are pre-glued, balanced, and ready for immediate track use — a must-have upgrade for serious racers looking to dominate on EOS-style and CRC carpet surfaces. ⚙️ Features: Pre-mounted on JConcepts Mono 12mm hex wheels (White or Yellow options) Low-profile carcass ensures stable cornering and direct steering response Super-stacked pin layout provides maximum traction and controlled wear Reverse “water tower” pin design enhances forward grip and durability Cut & sliced outer bars improve flexibility and edge control in tight sections Open outer pin spacing helps clear debris while maintaining traction Radial ribs along the sidewall deliver smooth, predictable handling Scalloped tire beads reduce rotating mass for quicker acceleration Pink compound tuned specifically for high-traction carpet performance 📏 Specifications: Part Numbers: 4174-101011 (White) / 4174-201011 (Yellow) Scale: 1/10 Position: Front (2WD Buggy) Compound: Pink (Carpet) Wheel Diameter: 2.2" Wheel Hex: 12mm Surface: Carpet / Turf Quantity: 2 Pre-Mounted Tires 📦 Includes: (2) JConcepts 3DP 2.2" 2WD Front Buggy Carpet Pre-Mounted Tires Mounted on (2) JConcepts Mono 12mm Hex Wheels (White or Yellow)  

Read more less

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) Durable Upgrade for Precision Fit & Adjustable Offset Upgrade your RC10 with the precision and strength of the Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex Set. CNC-machined and anodized for performance and style, these aluminum hexes offer a secure clamping design and are a great tuning option for adjusting track width and wheel fit. 🔧 Features: 🛠️ CNC-Machined Aluminum Construction – Lightweight, strong, and anodized for durability 🔒 Clamping Design – Secure fit with cap head screws prevents slipping during hard runs 🔁 Tuning Flexibility – Adjusts rear offset when used with compatible models 📦 Includes: (2) 7.0mm Clamping Hexes (2) Cross Pins (2) Cap Head Screws ⚙️ Compatibility Notes: ✅ Direct Fit For: RC10 B5M Factory Lite ✅ Optional Use On: T5M (stock offset), B5/B5M (adds offset) ⚠️ Requires: Team Associated HD Rear CVA Axle (ASC71019) 💡 Ideal for racers looking to fine-tune rear track width or reinforce wheel mounting with a reliable aluminum upgrade.

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Team Associated B6.1/B6.1D Caster & Steering Block Set (91776)Keep your front end tight and precise with this replacement caster and steering block set from Team Associated. Originally designed for the B6.1 and B6.1D buggies, this set also works great for compatible short course and stadium trucks like the SC6.1 and T6.1. ✅ Direct Replacement – For B6.1/B6.1D buggies✅ Multi-Platform Compatibility – Also fits SC6.1 and T6.1✅ Durable Construction – Built for precision and performance✅ OEM Fit – Ensures smooth steering and proper caster geometry 📦 Includes:– (1) Left Caster Block– (1) Right Caster Block– (1) Left Steering Block– (1) Right Steering Block Perfect for rebuilds, spares, or freshening up your front-end setup before the next race.

Read more less

Avid 7" Precut High-Clearance Wing (Standard or Lightweight) [AV10129-P-S] Product Overview: After months of development, the Avid 7" Precut High-Clearance Wing is engineered for optimal airflow, durability, and adjustability. Designed to fit all 1/10 scale buggies, this wing offers high clearance wheel cutouts and a low-drag profile, making it a top-tier choice for racers aiming to reduce turbulence while maintaining strength. Features: Precut 7” wing with standard thickness for maximum durability High and large radiused wheel cutouts for superior tire clearance 18.5° rear angle for reduced pressure and low drag without sacrificing strength Small centerline mark for easy centering during installation 8 structural ribs to maintain wing shape during crashes Dual gurney flap options to fine-tune rear traction Embossed AVID logo on the center panel Includes: (1) Avid 7" Precut High-Clearance Wing  Part Number: AV10129-P-S (Standard)/AV10129-P-LW (Lightweight)  

Read more less

Lock in your tires with the strongest, fastest-drying RC tire glue on the market. Pro-Line Pro-Bond CA Tire Glue delivers a 3,200 PSI bond strength, giving racers absolute confidence that tires stay glued lap after lap — no lifting, no peeling, no failures. This premium formula dries crystal clear, with zero yellowing or whitening, and uses a revolutionary bottle + tip design that makes application easier, cleaner, and more consistent than any other glue you’ve used. If you mount tires, this is the glue. Features 3,200 PSI holding strength — highest in its class Super-fast curing with crystal-clear finish Custom CA formula delivers maximum rubber bond Ultra-soft round bottle for perfect squeeze control Round design stays stable on the pit table Reusable translucent yellow applicator tips Perfect applicator hole size for tire gluing Cleaner, easier, more consistent than standard CA bottles Includes (1) Pro-Line Pro-Bond Tire Glue (0.7oz / 20g) (2) Reusable Yellow Pro-Bond Applicator Tips

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

Team Associated RC10B7 Factory Team Carbon Rear Suspension Arms (2) – Lightweight Tuning for High-Bite Tracks! 💨 Take your RC10B7 handling to the next level with Factory Team Carbon Rear Suspension Arms. Built from AE’s proven lightweight carbon composite, these arms reduce unsprung weight and eliminate flex — giving you the precision and durability needed for high-grip conditions and competitive edge. 🔧 Key Features: ✅ Factory Team carbon composite material – ultra-light and super strong✅ Tuned stiffness for reduced flex and consistent rear traction✅ Ideal for high-bite tracks and competitive setups✅ Includes rear arm spacers for quick tuning adjustments✅ Race-proven performance, direct fit upgrade 📦 Includes: (2) Carbon Rear Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Race harder, turn sharper, and accelerate faster with precision carbon upgrades.Factory Team quality you can feel. 🔧🔥

Read more less

Dial in your carpet setup with JConcepts Swaggers 2.2" Front Buggy Tires. These tires feature a low-profile carcass and angular ribs in multiple heights for maximum corner speed, razor-sharp tracking, and consistency on high-grip carpet or astro tracks. Designed for slim 2WD front wheels (JCO3376W or JCO3376Y), the Swagger’s pink medium-soft compound offers excellent wear while staying fast and easy to drive. 🏁 No insert required. Features:• Precision fit and finish from JConcepts• Offset angular rib design for enhanced cornering• Low-profile carcass for sharp response• Pink compound optimized for carpet and astro• No insert required

Read more less

Factory Team Aluminum Servo Horn – 25T / 18.5mm – Part 1363Stronger Steering. Smoother Control. The Factory Team 25T Aluminum Servo Horn (1363) is a premium upgrade for RC8B3, RC8B3e, RC8T3, and RC8T3e platforms. Machined from 7075 T6 aluminum, this horn is built to handle the demands of competitive racing. Its shorter 18.5mm length offers a smoother steering feel while reducing stress on the servo. ✅ 7075 T6 aluminum construction – lightweight and ultra-strong✅ 18.5mm length – optimized for smoother steering and less servo strain✅ Clamping design with large M2.5 screw – secure fit with reduced slop✅ Laser-etched 25T spline size – easy identification✅ Compatible with XP Digital, Reedy, Futaba, Savox, and newer Hitec servos✅ Perfect fit for RC8B3, B3e, T3, and T3e platforms 📦 Includes: (1) 25T Aluminum Clamping Servo Horn (18.5mm) (1) M2.5 Clamp Screw Part #: 1363 💡 Pro Tip: Shorter servo horns like this one help protect your servo during high-impact landings and tight cornering.

Read more less

This is a replacement G3 Shock End Set for Team Losi Racing vehicles equipped with G3 shocks. Designed for durability and smooth suspension operation, this set includes four high-quality shock ends compatible with a variety of TLR models. ✅ Includes:• (4) G3 Shock Ends Perfect for routine maintenance or as a direct replacement to keep your suspension performing at its best.

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

Refined torque. Tuned traction. Proven performance.The Team Associated RC10B7 3-Gear Gearbox Conversion Kit delivers a race-focused drivetrain upgrade that lets you fine-tune your buggy’s handling and power delivery. Designed for the RC10B7 and RC10B7D, and also compatible with T7 and SC7 platforms, this 3-gear layout alters torque transfer for a smoother, more balanced launch and enhanced rear-end stability. Perfect for racers chasing the edge on high-traction surfaces or looking to dial in rotation on tight tracks, the 3-gear conversion gives you the flexibility to tailor your drivetrain to your driving style. ⚙️ Features Performance-oriented 3-gear gearbox design Optimized torque response for improved traction and balance Includes notched differential height inserts for precise tuning Durable 54T idler gear with hardened idler shaft Factory-fit bearings and hardware for smooth installation CNC-machined aluminum arm mount (C) included Comprehensive kit with all mounting hardware and manual Designed for consistent durability and easy maintenance 📦 Includes (2) 3-Gear Gearbox Halves (4) Notched Differential Height Inserts (1) 54T Idler Gear (1) Idler Shaft (2) 10×15×4 mm Bearings (1) Aluminum Arm Mount (C) Full Hardware Set 3-Gear Conversion Manual ✅ Compatibility Team Associated RC10B7 / RC10B7D Team Associated T7 / SC7  

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

  📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Give your 1/10 off-road buggy maximum rotation, rear tire clearance, and pro-level stability with the JConcepts 7" High Clearance Pre-Cut Wing. Designed for carpet, turf, and dirt setups, this wing arrives pre-trimmed and ready to mount—no scissors, no hassle. Engineered with optimized rake, height, and side-dam shaping, the 0504 wing helps your buggy stay planted on power while freeing up rotation in tight corners. Its universal fit works with most 1/10 2WD and 4WD buggies, making it a must-have tuning item for modern high-grip and high-speed tracks. ⭐ Features Pre-cut design — mount it right out of the package 7" wide High Clearance profile for improved rotation and tire room Short-chord design for quicker steering response Flat-base layout for maximum rear tire expansion clearance Chopped rear corners reduce breakage and increase durability Dual stability fangs for added rigidity and consistent aero feel High rear angle provides excellent high-speed stability ROAR National Champion–proven design Works on most modern 1/10 buggies (2WD & 4WD)

Read more less

  Take your carpet and turf racing to the next level with the JConcepts Pin Swag 2.2" 2WD Slim Front Tires, engineered for razor-sharp steering and consistent forward bite. These innovative tires combine the proven outer lugs of the Swagger with a dense array of precision pins to deliver unmatched control, stability, and wear balance on today’s high-traction tracks. The unique “Pin + Swag” hybrid tread pattern features a split-center design for flexible surface adaptation and a staggered section that transitions power smoothly through corners. With a low-profile carcass for responsive handling and scalloped tire beads to cut weight, these front tires are the go-to choice for serious 1/10 racers seeking precision steering on high-grip carpet or turf. ⚙️ Features: JConcepts original Pin + Swag hybrid tread design for optimal front-end grip and balance Low-profile carcass layout improves stability and cornering precision Split-center pattern enhances surface conformity and steering smoothness Hefty base pins with sharp edges maximize bite and minimize wear Dense tread layout for even contact and consistent performance Ultra-light scalloped tire beads reduce rotating mass Ideal for EOS-style carpet and astro/turf tracks Pink compound optimized for high-traction racing 📏 Specifications: Part Number: 3181-010 Scale: 1/10 Position: Front (2WD Buggy) Compound: Pink (Carpet/Turf) Wheel Diameter: 2.2" Quantity: 2 Tires 📦 Includes: (2) JConcepts Pin Swag 2.2" 2WD Slim Front Tires  

Read more less

Maintain smooth, efficient power transfer with the Team Associated RC10B6.2 69mm CVA Bones. Built from high-quality materials, these precision-machined components are designed to withstand the rigors of competitive racing while ensuring consistent drivetrain performance. Features: 69mm length for proper fitment and geometry Precision-machined for smooth, efficient power delivery Durable construction for long-lasting performance Direct replacement for worn or damaged CVA bones Includes: (2) 69mm CVA Bones Compatibility: Team Associated RC10B6.2 Perfect for keeping your buggy’s drivetrain strong, smooth, and race-ready.

Read more less

📏 Fine-Tune Your Gear Ratio for Maximum 17.5 Power!The TLR 48 Pitch Direct Drive Spur Gears are precision-engineered for the TLR Direct Drive System (TLR332043), giving you ultimate control over your gearing setup. Whether you need more top-end speed or quicker acceleration, choose from 69T, 72T, or 75T options to match your track conditions and dial in your 17.5 stock setup like a pro. 🔧 Features: Designed specifically for the TLR Direct Drive System (TLR332043) Available in multiple tooth counts for perfect gearing: 69T, 72T, or 75T Precision-molded for smooth, quiet operation Ideal for 17.5 stock class racing 🏁 Optimize. Adapt. Win.These spurs help extract every ounce of performance when you're chasing podiums. Don't just race—race smart with the right spur gear. ✅ Note:The 69T and 75T spurs are included with TLR332043 but are also sold individually here for replacements or spares.

Read more less

Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

Team Losi Racing 22 5.0 Aluminum Clamping Servo Horn (Black) (25T)PART: TLR331033 Upgrade your steering precision with the Team Losi Racing 25T Aluminum Clamping Servo Horn, designed specifically for the 22 5.0 Electric Buggy Kits. This optional servo horn is CNC-machined from lightweight aluminum for strength and reliability under high stress. Finished in black anodizing with chamfered edges, it adds a touch of style while delivering top-tier performance. The clamping design ensures a secure, tight fit to your servo. Features: Precision-machined from lightweight aluminum Durable black anodized finish with chamfered accents Clamping style for secure fitment Compatible with 25T spline servos Designed for 22 5.0 Electric Buggy Kits

Read more less